| Message ID | 20181203103505.46885-4-xiaowei.bao@nxp.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [PATCHv3,1/4] dt-bindings: add DT binding for the layerscape PCIe controller with EP mode | expand |
| Context | Check | Description |
|---|---|---|
| snowpatch_ozlabs/apply_patch | warning | next/apply_patch Patch failed to apply |
| snowpatch_ozlabs/apply_patch | fail | Failed to apply to any branch |
On Mon, Dec 03, 2018 at 06:35:05PM +0800, Xiaowei Bao wrote: > Add the layerscape EP device support in pci_endpoint_test driver. > > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> > --- > v2: > - no change > v3: > - no change > > drivers/misc/pci_endpoint_test.c | 2 ++ > 1 files changed, 2 insertions(+), 0 deletions(-) > > diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c > index 896e2df..744d10c 100644 > --- a/drivers/misc/pci_endpoint_test.c > +++ b/drivers/misc/pci_endpoint_test.c > @@ -788,6 +788,8 @@ static void pci_endpoint_test_remove(struct pci_dev *pdev) > static const struct pci_device_id pci_endpoint_test_tbl[] = { > { PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA74x) }, > { PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA72x) }, > + /* 0x81c0: The device id of ls1046a in NXP. */ There is no need for a comment, just this line is fine: > + { PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, 0x81c0) }, If you note, no other lines have comments. If you want to say that this is a specific device, then use a #define with that device name and then use that define here, like the PCI_DEVICE_ID_TI_DRA72x was done. thanks, greg k-h
-----Original Message----- From: Greg KH <gregkh@linuxfoundation.org> Sent: 2018年12月19日 17:21 To: Xiaowei Bao <xiaowei.bao@nxp.com> Cc: bhelgaas@google.com; robh+dt@kernel.org; mark.rutland@arm.com; shawnguo@kernel.org; Leo Li <leoyang.li@nxp.com>; kishon@ti.com; lorenzo.pieralisi@arm.com; arnd@arndb.de; M.h. Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy Zang <roy.zang@nxp.com>; kstewart@linuxfoundation.org; cyrille.pitchen@free-electrons.com; pombredanne@nexb.com; shawn.lin@rock-chips.com; niklas.cassel@axis.com; linux-pci@vger.kernel.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org Subject: Re: [PATCHv3 4/4] misc: pci_endpoint_test: Add the layerscape EP device support On Mon, Dec 03, 2018 at 06:35:05PM +0800, Xiaowei Bao wrote: > Add the layerscape EP device support in pci_endpoint_test driver. > > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> > --- > v2: > - no change > v3: > - no change > > drivers/misc/pci_endpoint_test.c | 2 ++ > 1 files changed, 2 insertions(+), 0 deletions(-) > > diff --git a/drivers/misc/pci_endpoint_test.c > b/drivers/misc/pci_endpoint_test.c > index 896e2df..744d10c 100644 > --- a/drivers/misc/pci_endpoint_test.c > +++ b/drivers/misc/pci_endpoint_test.c > @@ -788,6 +788,8 @@ static void pci_endpoint_test_remove(struct > pci_dev *pdev) static const struct pci_device_id pci_endpoint_test_tbl[] = { > { PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA74x) }, > { PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA72x) }, > + /* 0x81c0: The device id of ls1046a in NXP. */ There is no need for a comment, just this line is fine: > + { PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, 0x81c0) }, If you note, no other lines have comments. If you want to say that this is a specific device, then use a #define with that device name and then use that define here, like the PCI_DEVICE_ID_TI_DRA72x was done. thanks, greg k-h [Xiaowei Bao] Hi Greg, OK, I can remove the comments in the next version patch.
diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c index 896e2df..744d10c 100644 --- a/drivers/misc/pci_endpoint_test.c +++ b/drivers/misc/pci_endpoint_test.c @@ -788,6 +788,8 @@ static void pci_endpoint_test_remove(struct pci_dev *pdev) static const struct pci_device_id pci_endpoint_test_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA74x) }, { PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA72x) }, + /* 0x81c0: The device id of ls1046a in NXP. */ + { PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, 0x81c0) }, { PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS, 0xedda) }, { } };
Add the layerscape EP device support in pci_endpoint_test driver. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> --- v2: - no change v3: - no change drivers/misc/pci_endpoint_test.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)