Message ID | 20181128135106.9255-13-manivannan.sadhasivam@linaro.org |
---|---|
State | New |
Headers | show |
Series | Add initial RDA8810PL SoC and Orange Pi boards support | expand |
On Wed, Nov 28, 2018 at 07:21:03PM +0530, Manivannan Sadhasivam wrote: > From: Andreas Färber <afaerber@suse.de> > > Add an initial binding for the UART in RDA Micro RDA8810PL SoC. > > Signed-off-by: Andreas Färber <afaerber@suse.de> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > --- > .../bindings/serial/rda,8810pl-uart.txt | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > create mode 100644 Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt > > diff --git a/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt > new file mode 100644 > index 000000000000..ee03116d7415 > --- /dev/null > +++ b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt > @@ -0,0 +1,15 @@ > +RDA Micro UART > + > +Required properties: > +- compatible : "rda,8810pl-uart" for RDA8810PL SoCs. > +- reg : Offset and length of the register set for the device. > +- interrupts : Should contain UART interrupt. Uarts generally need a clock. > + > + > +Example: > + > + uart2: serial@20a90000 { > + compatible = "rda,8810pl-uart"; > + reg = <0x20a90000 0x1000>; > + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; > + }; > -- > 2.17.1 >
diff --git a/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt new file mode 100644 index 000000000000..ee03116d7415 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt @@ -0,0 +1,15 @@ +RDA Micro UART + +Required properties: +- compatible : "rda,8810pl-uart" for RDA8810PL SoCs. +- reg : Offset and length of the register set for the device. +- interrupts : Should contain UART interrupt. + + +Example: + + uart2: serial@20a90000 { + compatible = "rda,8810pl-uart"; + reg = <0x20a90000 0x1000>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + };