| Message ID | 1542823573-20228-2-git-send-email-hofrat@osadl.org |
|---|---|
| State | New |
| Headers | show |
| Series | [1/2] gpio: mt7621: report failure of devm_kasprintf() | expand |
śr., 21 lis 2018 o 19:13 Nicholas Mc Guire <hofrat@osadl.org> napisał(a): > > The error cases of mediatek_gpio_bank_probe() would go unnoticed (except > for the dev_err() messages). The probe function should return an error > if one of the banks failed to initialize properly. > > Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> > Fixes: 4ba9c3afda41 ("gpio: mt7621: Add a driver for MT7621") > --- > > Patch was compile tested with: omega2p_defconfig, SOC_MT7621=y, > GPIOLIB=y, GPIO_MT7621=y > > Patch is against 4.20-rc3 (localversion-next is next-20181121) > > drivers/gpio/gpio-mt7621.c | 8 ++++++-- > 1 file changed, 6 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpio/gpio-mt7621.c b/drivers/gpio/gpio-mt7621.c > index 1ec95bc..68fca8b 100644 > --- a/drivers/gpio/gpio-mt7621.c > +++ b/drivers/gpio/gpio-mt7621.c > @@ -297,6 +297,7 @@ mediatek_gpio_probe(struct platform_device *pdev) > struct device_node *np = dev->of_node; > struct mtk *mtk; > int i; > + int ret; > > mtk = devm_kzalloc(dev, sizeof(*mtk), GFP_KERNEL); > if (!mtk) > @@ -311,8 +312,11 @@ mediatek_gpio_probe(struct platform_device *pdev) > platform_set_drvdata(pdev, mtk); > mediatek_gpio_irq_chip.name = dev_name(dev); > > - for (i = 0; i < MTK_BANK_CNT; i++) > - mediatek_gpio_bank_probe(dev, np, i); > + for (i = 0; i < MTK_BANK_CNT; i++) { > + ret = mediatek_gpio_bank_probe(dev, np, i); > + if (!ret) > + return ret; > + } Looks like are resources allocated in mediatek_gpio_bank_probe() will be freed automatically so: Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Nicholas Mc Guire <hofrat@osadl.org> 於 2018年11月21日 週三 上午10:13寫道： > > The error cases of mediatek_gpio_bank_probe() would go unnoticed (except > for the dev_err() messages). The probe function should return an error > if one of the banks failed to initialize properly. > > Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> > Fixes: 4ba9c3afda41 ("gpio: mt7621: Add a driver for MT7621") > --- > > Patch was compile tested with: omega2p_defconfig, SOC_MT7621=y, > GPIOLIB=y, GPIO_MT7621=y > > Patch is against 4.20-rc3 (localversion-next is next-20181121) > > drivers/gpio/gpio-mt7621.c | 8 ++++++-- > 1 file changed, 6 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpio/gpio-mt7621.c b/drivers/gpio/gpio-mt7621.c > index 1ec95bc..68fca8b 100644 > --- a/drivers/gpio/gpio-mt7621.c > +++ b/drivers/gpio/gpio-mt7621.c > @@ -297,6 +297,7 @@ mediatek_gpio_probe(struct platform_device *pdev) > struct device_node *np = dev->of_node; > struct mtk *mtk; > int i; > + int ret; > > mtk = devm_kzalloc(dev, sizeof(*mtk), GFP_KERNEL); > if (!mtk) > @@ -311,8 +312,11 @@ mediatek_gpio_probe(struct platform_device *pdev) > platform_set_drvdata(pdev, mtk); > mediatek_gpio_irq_chip.name = dev_name(dev); > > - for (i = 0; i < MTK_BANK_CNT; i++) > - mediatek_gpio_bank_probe(dev, np, i); > + for (i = 0; i < MTK_BANK_CNT; i++) { > + ret = mediatek_gpio_bank_probe(dev, np, i); > + if (!ret) it should be if (ret < 0) ? > + return ret; > + } > > return 0; > } > -- > 2.1.4 > > > _______________________________________________ > Linux-mediatek mailing list > Linux-mediatek@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-mediatek
On Mon, Nov 26, 2018 at 11:49:26PM -0800, Sean Wang wrote: > Nicholas Mc Guire <hofrat@osadl.org> ??? 2018???11???21??? ?????? ??????10:13????????? > > > > The error cases of mediatek_gpio_bank_probe() would go unnoticed (except > > for the dev_err() messages). The probe function should return an error > > if one of the banks failed to initialize properly. > > > > Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> > > Fixes: 4ba9c3afda41 ("gpio: mt7621: Add a driver for MT7621") > > --- > > > > Patch was compile tested with: omega2p_defconfig, SOC_MT7621=y, > > GPIOLIB=y, GPIO_MT7621=y > > > > Patch is against 4.20-rc3 (localversion-next is next-20181121) > > > > drivers/gpio/gpio-mt7621.c | 8 ++++++-- > > 1 file changed, 6 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/gpio/gpio-mt7621.c b/drivers/gpio/gpio-mt7621.c > > index 1ec95bc..68fca8b 100644 > > --- a/drivers/gpio/gpio-mt7621.c > > +++ b/drivers/gpio/gpio-mt7621.c > > @@ -297,6 +297,7 @@ mediatek_gpio_probe(struct platform_device *pdev) > > struct device_node *np = dev->of_node; > > struct mtk *mtk; > > int i; > > + int ret; > > > > mtk = devm_kzalloc(dev, sizeof(*mtk), GFP_KERNEL); > > if (!mtk) > > @@ -311,8 +312,11 @@ mediatek_gpio_probe(struct platform_device *pdev) > > platform_set_drvdata(pdev, mtk); > > mediatek_gpio_irq_chip.name = dev_name(dev); > > > > - for (i = 0; i < MTK_BANK_CNT; i++) > > - mediatek_gpio_bank_probe(dev, np, i); > > + for (i = 0; i < MTK_BANK_CNT; i++) { > > + ret = mediatek_gpio_bank_probe(dev, np, i); > > + if (!ret) > > it should be if (ret < 0) ? I don´t think so mediatek_gpio_bank_probe() returns 0 on success and all other returns are error paths - while the current code only returns negative values I do thik that any non 0 would be an error indication so !ret should be fine here. thx! hofrat > > > + return ret; > > + } > > > > return 0; > > } > > -- > > 2.1.4 > > > > > > _______________________________________________ > > Linux-mediatek mailing list > > Linux-mediatek@lists.infradead.org > > http://lists.infradead.org/mailman/listinfo/linux-mediatek
> > On Mon, Nov 26, 2018 at 11:49:26PM -0800, Sean Wang wrote: > > Nicholas Mc Guire <hofrat@osadl.org> ??? 2018???11???21??? ?????? ??????10:13????????? > > > > > > The error cases of mediatek_gpio_bank_probe() would go unnoticed (except > > > for the dev_err() messages). The probe function should return an error > > > if one of the banks failed to initialize properly. > > > > > > Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> > > > Fixes: 4ba9c3afda41 ("gpio: mt7621: Add a driver for MT7621") > > > --- > > > > > > Patch was compile tested with: omega2p_defconfig, SOC_MT7621=y, > > > GPIOLIB=y, GPIO_MT7621=y > > > > > > Patch is against 4.20-rc3 (localversion-next is next-20181121) > > > > > > drivers/gpio/gpio-mt7621.c | 8 ++++++-- > > > 1 file changed, 6 insertions(+), 2 deletions(-) > > > > > > diff --git a/drivers/gpio/gpio-mt7621.c b/drivers/gpio/gpio-mt7621.c > > > index 1ec95bc..68fca8b 100644 > > > --- a/drivers/gpio/gpio-mt7621.c > > > +++ b/drivers/gpio/gpio-mt7621.c > > > @@ -297,6 +297,7 @@ mediatek_gpio_probe(struct platform_device *pdev) > > > struct device_node *np = dev->of_node; > > > struct mtk *mtk; > > > int i; > > > + int ret; > > > > > > mtk = devm_kzalloc(dev, sizeof(*mtk), GFP_KERNEL); > > > if (!mtk) > > > @@ -311,8 +312,11 @@ mediatek_gpio_probe(struct platform_device *pdev) > > > platform_set_drvdata(pdev, mtk); > > > mediatek_gpio_irq_chip.name = dev_name(dev); > > > > > > - for (i = 0; i < MTK_BANK_CNT; i++) > > > - mediatek_gpio_bank_probe(dev, np, i); > > > + for (i = 0; i < MTK_BANK_CNT; i++) { > > > + ret = mediatek_gpio_bank_probe(dev, np, i); > > > + if (!ret) > > > > it should be if (ret < 0) ? > > I don´t think so mediatek_gpio_bank_probe() returns 0 on success > and all other returns are error paths - while the current code > only returns negative values I do thik that any non 0 would be > an error indication so !ret should be fine here. > !0 would be true > thx! > hofrat > > > > > > + return ret; > > > + } > > > > > > return 0; > > > } > > > -- > > > 2.1.4 > > > > > > > > > _______________________________________________ > > > Linux-mediatek mailing list > > > Linux-mediatek@lists.infradead.org > > > http://lists.infradead.org/mailman/listinfo/linux-mediatek > > _______________________________________________ > Linux-mediatek mailing list > Linux-mediatek@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-mediatek
On Tue, Nov 27, 2018 at 12:32:59AM -0800, Sean Wang wrote: > > > > On Mon, Nov 26, 2018 at 11:49:26PM -0800, Sean Wang wrote: > > > Nicholas Mc Guire <hofrat@osadl.org> ??? 2018???11???21??? ?????? ??????10:13????????? > > > > > > > > The error cases of mediatek_gpio_bank_probe() would go unnoticed (except > > > > for the dev_err() messages). The probe function should return an error > > > > if one of the banks failed to initialize properly. > > > > > > > > Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> > > > > Fixes: 4ba9c3afda41 ("gpio: mt7621: Add a driver for MT7621") > > > > --- > > > > > > > > Patch was compile tested with: omega2p_defconfig, SOC_MT7621=y, > > > > GPIOLIB=y, GPIO_MT7621=y > > > > > > > > Patch is against 4.20-rc3 (localversion-next is next-20181121) > > > > > > > > drivers/gpio/gpio-mt7621.c | 8 ++++++-- > > > > 1 file changed, 6 insertions(+), 2 deletions(-) > > > > > > > > diff --git a/drivers/gpio/gpio-mt7621.c b/drivers/gpio/gpio-mt7621.c > > > > index 1ec95bc..68fca8b 100644 > > > > --- a/drivers/gpio/gpio-mt7621.c > > > > +++ b/drivers/gpio/gpio-mt7621.c > > > > @@ -297,6 +297,7 @@ mediatek_gpio_probe(struct platform_device *pdev) > > > > struct device_node *np = dev->of_node; > > > > struct mtk *mtk; > > > > int i; > > > > + int ret; > > > > > > > > mtk = devm_kzalloc(dev, sizeof(*mtk), GFP_KERNEL); > > > > if (!mtk) > > > > @@ -311,8 +312,11 @@ mediatek_gpio_probe(struct platform_device *pdev) > > > > platform_set_drvdata(pdev, mtk); > > > > mediatek_gpio_irq_chip.name = dev_name(dev); > > > > > > > > - for (i = 0; i < MTK_BANK_CNT; i++) > > > > - mediatek_gpio_bank_probe(dev, np, i); > > > > + for (i = 0; i < MTK_BANK_CNT; i++) { > > > > + ret = mediatek_gpio_bank_probe(dev, np, i); > > > > + if (!ret) > > > > > > it should be if (ret < 0) ? > > > > I don´t think so mediatek_gpio_bank_probe() returns 0 on success > > and all other returns are error paths - while the current code > > only returns negative values I do thik that any non 0 would be > > an error indication so !ret should be fine here. > > > !0 would be true > ...sorry - stupid me - thanks for catching that ! thx! hofrat
diff --git a/drivers/gpio/gpio-mt7621.c b/drivers/gpio/gpio-mt7621.c index 1ec95bc..68fca8b 100644 --- a/drivers/gpio/gpio-mt7621.c +++ b/drivers/gpio/gpio-mt7621.c @@ -297,6 +297,7 @@ mediatek_gpio_probe(struct platform_device *pdev) struct device_node *np = dev->of_node; struct mtk *mtk; int i; + int ret; mtk = devm_kzalloc(dev, sizeof(*mtk), GFP_KERNEL); if (!mtk) @@ -311,8 +312,11 @@ mediatek_gpio_probe(struct platform_device *pdev) platform_set_drvdata(pdev, mtk); mediatek_gpio_irq_chip.name = dev_name(dev); - for (i = 0; i < MTK_BANK_CNT; i++) - mediatek_gpio_bank_probe(dev, np, i); + for (i = 0; i < MTK_BANK_CNT; i++) { + ret = mediatek_gpio_bank_probe(dev, np, i); + if (!ret) + return ret; + } return 0; }
The error cases of mediatek_gpio_bank_probe() would go unnoticed (except for the dev_err() messages). The probe function should return an error if one of the banks failed to initialize properly. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Fixes: 4ba9c3afda41 ("gpio: mt7621: Add a driver for MT7621") --- Patch was compile tested with: omega2p_defconfig, SOC_MT7621=y, GPIOLIB=y, GPIO_MT7621=y Patch is against 4.20-rc3 (localversion-next is next-20181121) drivers/gpio/gpio-mt7621.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)