Message ID | 1539090357-20853-1-git-send-email-govinds@codeaurora.org |
---|---|
Headers | show |
Series | Add non PAS wcss Q6 support for QCS404 | expand |
On 10/9/2018 6:35 PM, Govind Singh wrote: > Add support for the WCSS QDSP gcc clock control used on qcs404 based devices. > This would allow wcss remoteproc driver to control the required gcc clocks to > bring the subsystem out of reset. > > Signed-off-by: Govind Singh <govinds@codeaurora.org> > --- > drivers/clk/qcom/gcc-qcs404.c | 39 ++++++++++++++++++++++++++++++++++++++- > 1 file changed, 38 insertions(+), 1 deletion(-) > > diff --git a/drivers/clk/qcom/gcc-qcs404.c b/drivers/clk/qcom/gcc-qcs404.c > index 6d1387e..bcbfe19 100644 > --- a/drivers/clk/qcom/gcc-qcs404.c > +++ b/drivers/clk/qcom/gcc-qcs404.c > @@ -2505,6 +2505,34 @@ enum { > }, > }; > > +static struct clk_branch gcc_ahbs_cbcr_clk = { There is no such clock, the clock names should match exactly as they are represented in hardware plans. > + .halt_reg = 0x1e004, > + .halt_check = BRANCH_HALT, > + .clkr = { > + .enable_reg = 0x1e004, > + .enable_mask = BIT(0), > + .hw.init = &(struct clk_init_data){ > + .name = "gcc_ahb_cbcr_clk", > + .ops = &clk_branch2_ops, > + .flags = CLK_IGNORE_UNUSED, Do we need this flag? > + }, > + }, > +}; > + > +static struct clk_branch gcc_axim_cbcr_clk = { > + .halt_reg = 0x1e008, > + .halt_check = BRANCH_HALT, > + .clkr = { > + .enable_reg = 0x1e008, > + .enable_mask = BIT(0), > + .hw.init = &(struct clk_init_data){ > + .name = "gcc_axim_cbcr_clk", > + .ops = &clk_branch2_ops, > + .flags = CLK_IGNORE_UNUSED, > + }, > + }, > +}; > + > static struct clk_regmap *gcc_qcs404_clocks[] = { > [APSS_AHB_CLK_SRC] = &apss_ahb_clk_src.clkr, > [BLSP1_QUP0_I2C_APPS_CLK_SRC] = &blsp1_qup0_i2c_apps_clk_src.clkr, > @@ -2642,6 +2670,9 @@ enum { > [GCC_QDSS_DAP_CLK] = &gcc_qdss_dap_clk.clkr, > [GCC_DCC_CLK] = &gcc_dcc_clk.clkr, > [GCC_DCC_XO_CLK] = &gcc_dcc_xo_clk.clkr, > + [GCC_WCSS_Q6_AHB_CBCR_CLK] = NULL, > + [GCC_WCSS_Q6_AXIM_CBCR_CLK] = NULL, > + > }; > > static const struct qcom_reset_map gcc_qcs404_resets[] = { > @@ -2659,6 +2690,7 @@ enum { > [GCC_PCIE_0_LINK_DOWN_BCR] = {0x3E038}, > [GCC_PCIEPHY_0_PHY_BCR] = {0x3E03C}, > [GCC_EMAC_BCR] = {0x4E000}, > + [GCC_WDSP_RESTART] = {0x19000}, s/RESTART/BCR > }; > > static const struct regmap_config gcc_qcs404_regmap_config = { > @@ -2669,7 +2701,7 @@ enum { > .fast_io = true, > }; > > -static const struct qcom_cc_desc gcc_qcs404_desc = { > +static struct qcom_cc_desc gcc_qcs404_desc = { > .config = &gcc_qcs404_regmap_config, > .clks = gcc_qcs404_clocks, > .num_clks = ARRAY_SIZE(gcc_qcs404_clocks), > @@ -2702,6 +2734,11 @@ static int gcc_qcs404_probe(struct platform_device *pdev) > clk_prepare_enable(apss_ahb_clk_src.clkr.hw.clk); > clk_prepare_enable(gpll0_ao_out_main.clkr.hw.clk); > > + if (of_property_read_bool(pdev->dev.of_node, "qcom,wcss-protected")) { > + gcc_qcs404_clocks[GCC_WCSS_Q6_AHB_CBCR_CLK] = &gcc_ahbs_cbcr_clk.clkr; > + gcc_qcs404_clocks[GCC_WCSS_Q6_AXIM_CBCR_CLK] = &gcc_axim_cbcr_clk.clkr; > + } > + > return qcom_cc_really_probe(pdev, &gcc_qcs404_desc, regmap); > } > >
Thanks Taniya for the review. On 2018-10-09 23:25, Taniya Das wrote: > On 10/9/2018 6:35 PM, Govind Singh wrote: >> Add support for the WCSS QDSP gcc clock control used on qcs404 based >> devices. >> This would allow wcss remoteproc driver to control the required gcc >> clocks to >> bring the subsystem out of reset. >> >> Signed-off-by: Govind Singh <govinds@codeaurora.org> >> --- >> drivers/clk/qcom/gcc-qcs404.c | 39 >> ++++++++++++++++++++++++++++++++++++++- >> 1 file changed, 38 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/clk/qcom/gcc-qcs404.c >> b/drivers/clk/qcom/gcc-qcs404.c >> index 6d1387e..bcbfe19 100644 >> --- a/drivers/clk/qcom/gcc-qcs404.c >> +++ b/drivers/clk/qcom/gcc-qcs404.c >> @@ -2505,6 +2505,34 @@ enum { >> }, >> }; >> +static struct clk_branch gcc_ahbs_cbcr_clk = { > > There is no such clock, the clock names should match exactly as they > are represented in hardware plans. > I will change the names in next patch-set. Below are the names in hw plans. gcc_wdsp_q6ss_axim_clk gcc_wdsp_q6ss_ahbs_clk >> + .halt_reg = 0x1e004, >> + .halt_check = BRANCH_HALT, >> + .clkr = { >> + .enable_reg = 0x1e004, >> + .enable_mask = BIT(0), >> + .hw.init = &(struct clk_init_data){ >> + .name = "gcc_ahb_cbcr_clk", >> + .ops = &clk_branch2_ops, >> + .flags = CLK_IGNORE_UNUSED, > > Do we need this flag? This is not required in gcc controls, i will clean up this in next patch-set. >> + }, >> + }, >> +}; >> + >> +static struct clk_branch gcc_axim_cbcr_clk = { >> + .halt_reg = 0x1e008, >> + .halt_check = BRANCH_HALT, >> + .clkr = { >> + .enable_reg = 0x1e008, >> + .enable_mask = BIT(0), >> + .hw.init = &(struct clk_init_data){ >> + .name = "gcc_axim_cbcr_clk", >> + .ops = &clk_branch2_ops, >> + .flags = CLK_IGNORE_UNUSED, >> + }, >> + }, >> +}; >> + >> static struct clk_regmap *gcc_qcs404_clocks[] = { >> [APSS_AHB_CLK_SRC] = &apss_ahb_clk_src.clkr, >> [BLSP1_QUP0_I2C_APPS_CLK_SRC] = &blsp1_qup0_i2c_apps_clk_src.clkr, >> @@ -2642,6 +2670,9 @@ enum { >> [GCC_QDSS_DAP_CLK] = &gcc_qdss_dap_clk.clkr, >> [GCC_DCC_CLK] = &gcc_dcc_clk.clkr, >> [GCC_DCC_XO_CLK] = &gcc_dcc_xo_clk.clkr, >> + [GCC_WCSS_Q6_AHB_CBCR_CLK] = NULL, >> + [GCC_WCSS_Q6_AXIM_CBCR_CLK] = NULL, >> + >> }; >> static const struct qcom_reset_map gcc_qcs404_resets[] = { >> @@ -2659,6 +2690,7 @@ enum { >> [GCC_PCIE_0_LINK_DOWN_BCR] = {0x3E038}, >> [GCC_PCIEPHY_0_PHY_BCR] = {0x3E03C}, >> [GCC_EMAC_BCR] = {0x4E000}, >> + [GCC_WDSP_RESTART] = {0x19000}, > > s/RESTART/BCR > This reset control is listed as WDSP_RESTART in register spec. >> }; >> static const struct regmap_config gcc_qcs404_regmap_config = { >> @@ -2669,7 +2701,7 @@ enum { >> .fast_io = true, >> }; >> -static const struct qcom_cc_desc gcc_qcs404_desc = { >> +static struct qcom_cc_desc gcc_qcs404_desc = { >> .config = &gcc_qcs404_regmap_config, >> .clks = gcc_qcs404_clocks, >> .num_clks = ARRAY_SIZE(gcc_qcs404_clocks), >> @@ -2702,6 +2734,11 @@ static int gcc_qcs404_probe(struct >> platform_device *pdev) >> clk_prepare_enable(apss_ahb_clk_src.clkr.hw.clk); >> clk_prepare_enable(gpll0_ao_out_main.clkr.hw.clk); >> + if (of_property_read_bool(pdev->dev.of_node, >> "qcom,wcss-protected")) { >> + gcc_qcs404_clocks[GCC_WCSS_Q6_AHB_CBCR_CLK] = >> &gcc_ahbs_cbcr_clk.clkr; >> + gcc_qcs404_clocks[GCC_WCSS_Q6_AXIM_CBCR_CLK] = >> &gcc_axim_cbcr_clk.clkr; >> + } >> + >> return qcom_cc_really_probe(pdev, &gcc_qcs404_desc, regmap); >> } >> BR, Govind