mbox series

[net-next,v3,0/5,pull,request] 1GbE Intel Wired LAN Driver Updates 2019-10-21

Message ID 20191021180143.11775-1-jeffrey.t.kirsher@intel.com
Headers show
Series 1GbE Intel Wired LAN Driver Updates 2019-10-21 | expand

Message

Kirsher, Jeffrey T Oct. 21, 2019, 6:01 p.m. UTC
This series contains updates to e1000e and igc only.

Sasha adds stream control transmission protocol (SCTP) CRC checksum
support for igc.  Also added S0ix support to the e1000e driver.  Then
added multicast support by adding the address list to the MTA table and
providing the option for IPv6 address for igc.  In addition, added
receive checksum support to igc as well.  Lastly, cleaned up some code
that was not fully implemented yet for the VLAN filter table array.

v2: Dropped patch 1 & 2 from the original series.  Patch 1 is being sent
    to 'net' tree as a fix and patch 2 implementation needs to be
    re-worked.  Updated the patch to add support for S0ix to fix the
    reverse Xmas tree issues and made the entry/exit functions void
    since they constantly returned success.  All based on community
    feedback.
v3: Cleaned up patch 4 of the series based on feedback from the
    community.  Cleaned up a stray comma in a code comment and removed
    the 'inline' of a function that would be inlined by the compiler
    anyways.

The following are changes since commit 13faf77185225a1383f6f5a072383771ccfe456b:
  Merge branch 'hns3-next'
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue 1GbE

Sasha Neftin (5):
  igc: Add SCTP CRC checksumming functionality
  e1000e: Add support for S0ix
  igc: Add set_rx_mode support
  igc: Add Rx checksum support
  igc: Clean up unused shadow_vfta pointer

 drivers/net/ethernet/intel/e1000e/netdev.c   | 182 +++++++++++++++
 drivers/net/ethernet/intel/e1000e/regs.h     |   4 +
 drivers/net/ethernet/intel/igc/igc.h         |   1 -
 drivers/net/ethernet/intel/igc/igc_defines.h |   8 +-
 drivers/net/ethernet/intel/igc/igc_hw.h      |   1 +
 drivers/net/ethernet/intel/igc/igc_mac.c     | 104 +++++++++
 drivers/net/ethernet/intel/igc/igc_mac.h     |   2 +
 drivers/net/ethernet/intel/igc/igc_main.c    | 226 ++++++++++++++++++-
 8 files changed, 525 insertions(+), 3 deletions(-)

Comments

Jakub Kicinski Oct. 22, 2019, 3:21 a.m. UTC | #1
On Mon, 21 Oct 2019 11:01:38 -0700, Jeff Kirsher wrote:
> This series contains updates to e1000e and igc only.
> 
> Sasha adds stream control transmission protocol (SCTP) CRC checksum
> support for igc.  Also added S0ix support to the e1000e driver.  Then
> added multicast support by adding the address list to the MTA table and
> providing the option for IPv6 address for igc.  In addition, added
> receive checksum support to igc as well.  Lastly, cleaned up some code
> that was not fully implemented yet for the VLAN filter table array.
> 
> v2: Dropped patch 1 & 2 from the original series.  Patch 1 is being sent
>     to 'net' tree as a fix and patch 2 implementation needs to be
>     re-worked.  Updated the patch to add support for S0ix to fix the
>     reverse Xmas tree issues and made the entry/exit functions void
>     since they constantly returned success.  All based on community
>     feedback.
> v3: Cleaned up patch 4 of the series based on feedback from the
>     community.  Cleaned up a stray comma in a code comment and removed
>     the 'inline' of a function that would be inlined by the compiler
>     anyways.
> 
> The following are changes since commit 13faf77185225a1383f6f5a072383771ccfe456b:
>   Merge branch 'hns3-next'
> and are available in the git repository at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue 1GbE

Pulled, thanks!