[v2,0/4] Add GPIO support for RDA8810PL SoC
mbox series

Message ID 20191015173026.9962-1-manivannan.sadhasivam@linaro.org
Headers show
Series
  • Add GPIO support for RDA8810PL SoC
Related show

Message

Manivannan Sadhasivam Oct. 15, 2019, 5:30 p.m. UTC
Hello,

This patchset adds GPIO controller support for RDA Micro RDA8810PL
SoC. This SoC has 4 GPIO controllers and each handles 32 GPIOs. Except
GPIOC, all controllers are capable of generating edge/level interrupts
from first 8 GPIO lines. The pinctrl part for this SoC will be added
later.

This driver has been validated on 96Boards OrangePi i96 board from
Shenzhen Xunlong Software Co.,Limited with libgpiod.

Thanks,
Mani

Changes in v2:

As per the review by Bartosz:

* Dropped the not implemented gpio_request/free callbacks.
* Used device_* helper to fetch ngpios.

Manivannan Sadhasivam (4):
  dt-bindings: gpio: Add devicetree binding for RDA Micro GPIO
    controller
  ARM: dts: Add RDA8810PL GPIO controllers
  gpio: Add RDA Micro GPIO controller support
  MAINTAINERS: Add entry for RDA Micro GPIO driver and binding

 .../devicetree/bindings/gpio/gpio-rda.yaml    |  50 +++
 MAINTAINERS                                   |   2 +
 arch/arm/boot/dts/rda8810pl.dtsi              |  48 +++
 drivers/gpio/Kconfig                          |   8 +
 drivers/gpio/Makefile                         |   1 +
 drivers/gpio/gpio-rda.c                       | 315 ++++++++++++++++++
 6 files changed, 424 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-rda.yaml
 create mode 100644 drivers/gpio/gpio-rda.c