Message ID | 20190826120821.16351-1-tudor.ambarus@microchip.com |
---|---|
Headers | show |
Series | mtd: spi-nor: move manuf out of the core | expand |
On 26/08/19 5:38 PM, Tudor.Ambarus@microchip.com wrote: > From: Tudor Ambarus <tudor.ambarus@microchip.com> [...] > > Tested on sst26vf064b with atmel-quadspi SPIMEM driver. > Tested s25fl256s, mx66l51235l with ti-qspi and s25fl512s with cadence-quadspi. n25q128a13 with legacy 1 bit SPI controller. > Boris Brezillon (7): > mtd: spi-nor: Add a default_init() fixup hook for gd25q256 > mtd: spi-nor: Create a ->set_4byte() method > mtd: spi-nor: Rework the SPI NOR lock/unlock logic > mtd: spi-nor: Add post_sfdp() hook to tweak flash config > mtd: spi-nor: Add spansion_post_sfdp_fixups() > mtd: spi-nor: Add a ->convert_addr() method > mtd: spi-nor: Add the SPI_NOR_XSR_RDY flag > > Tudor Ambarus (13): > mtd: spi-nor: Regroup flash parameter and settings > mtd: spi-nor: Use nor->params > mtd: spi-nor: Drop quad_enable() from 'struct spi-nor' > mtd: spi-nor: Move erase_map to 'struct spi_nor_flash_parameter' > mtd: spi-nor: Add default_init() hook to tweak flash parameters > mtd: spi_nor: Move manufacturer quad_enable() in ->default_init() > mtd: spi-nor: Split spi_nor_init_params() > mtd: spi_nor: Add a ->setup() method > mtd: spi-nor: Add s3an_post_sfdp_fixups() > mtd: spi-nor: Bring flash params init together > mtd: spi_nor: Introduce spi_nor_set_addr_width() > mtd: spi-nor: Introduce spi_nor_get_flash_info() > mtd: spi-nor: Rework the disabling of block write protection > > drivers/mtd/spi-nor/spi-nor.c | 1304 +++++++++++++++++++++++------------------ > include/linux/mtd/spi-nor.h | 298 +++++++--- > 2 files changed, 927 insertions(+), 675 deletions(-) >
On 08/26/2019 03:08 PM, Tudor Ambarus - M18064 wrote: > From: Tudor Ambarus <tudor.ambarus@microchip.com> > > v3: > - Drop patches: > "mtd: spi-nor: Move clear_sr_bp() to 'struct spi_nor_flash_parameter'" > "mtd: spi-nor: Rework the disabling of block write protection" > and replace them with the RFC patch: > "mtd: spi-nor: Rework the disabling of block write protection" > - rename spi_nor_legacy_init_params() to spi_nor_info_init_params() > - rebase patches and send them all in a single patch set. > > v2: > - addressed all the comments > - all flash parameters and settings are now set in 'struct > spi_nor_flash_parameter', for a clearer separation between the SPI NOR > layer and the flash params. > > In order to test this, you'll have to merge v5.3-rc5 in spi-nor/next. > This patch set depends on > 'commit 834de5c1aa76 ("mtd: spi-nor: Fix the disabling of write protection at init") > > The scope of the "mtd: spi-nor: move manuf out of the core" batches, > is to move all manufacturer specific code out of the spi-nor core. > > In the quest of removing the manufacturer specific code from the spi-nor > core, we want to impose a timeline/priority on how the flash parameters > are updated. As of now. the flash parameters initialization logic is as > following: > > a/ default flash parameters init in spi_nor_init_params() > b/ manufacturer specific flash parameters updates, split across entire > spi-nor core code > c/ flash parameters updates based on SFDP tables > d/ post BFPT flash parameter updates > > With the "mtd: spi-nor: move manuf out of the core" batches, we want to > impose the following sequence of calls: > > 1/ spi-nor core legacy flash parameters init: > spi_nor_default_init_params() > > 2/ MFR-based manufacturer flash parameters init: > nor->manufacturer->fixups->default_init() > > 3/ specific flash_info tweeks done when decisions can not be done just > on MFR: > nor->info->fixups->default_init() > > 4/ SFDP tables flash parameters init - SFDP knows better: > spi_nor_sfdp_init_params() > > 5/ post SFDP tables flash parameters updates - in case manufacturers > get the serial flash tables wrong or incomplete. > nor->info->fixups->post_sfdp() > The later can be extended to nor->manufacturer->fixups->post_sfdp() > if needed. > > Setting of flash parameters will no longer be spread interleaved across > the spi-nor core, there will be a clear separation on who and when will > update the flash parameters. > > Tested on sst26vf064b with atmel-quadspi SPIMEM driver. > > Boris Brezillon (7): > mtd: spi-nor: Add a default_init() fixup hook for gd25q256 > mtd: spi-nor: Create a ->set_4byte() method > mtd: spi-nor: Rework the SPI NOR lock/unlock logic > mtd: spi-nor: Add post_sfdp() hook to tweak flash config > mtd: spi-nor: Add spansion_post_sfdp_fixups() > mtd: spi-nor: Add a ->convert_addr() method > mtd: spi-nor: Add the SPI_NOR_XSR_RDY flag > > Tudor Ambarus (13): > mtd: spi-nor: Regroup flash parameter and settings > mtd: spi-nor: Use nor->params > mtd: spi-nor: Drop quad_enable() from 'struct spi-nor' > mtd: spi-nor: Move erase_map to 'struct spi_nor_flash_parameter' > mtd: spi-nor: Add default_init() hook to tweak flash parameters > mtd: spi_nor: Move manufacturer quad_enable() in ->default_init() > mtd: spi-nor: Split spi_nor_init_params() > mtd: spi_nor: Add a ->setup() method > mtd: spi-nor: Add s3an_post_sfdp_fixups() > mtd: spi-nor: Bring flash params init together > mtd: spi_nor: Introduce spi_nor_set_addr_width() > mtd: spi-nor: Introduce spi_nor_get_flash_info() > mtd: spi-nor: Rework the disabling of block write protection > > drivers/mtd/spi-nor/spi-nor.c | 1304 +++++++++++++++++++++++------------------ > include/linux/mtd/spi-nor.h | 298 +++++++--- > 2 files changed, 927 insertions(+), 675 deletions(-) > Addressed Boris's and Vingnesh's latest small updates. All but last applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git, spi-nor/next branch. Thanks, ta
From: Tudor Ambarus <tudor.ambarus@microchip.com> v3: - Drop patches: "mtd: spi-nor: Move clear_sr_bp() to 'struct spi_nor_flash_parameter'" "mtd: spi-nor: Rework the disabling of block write protection" and replace them with the RFC patch: "mtd: spi-nor: Rework the disabling of block write protection" - rename spi_nor_legacy_init_params() to spi_nor_info_init_params() - rebase patches and send them all in a single patch set. v2: - addressed all the comments - all flash parameters and settings are now set in 'struct spi_nor_flash_parameter', for a clearer separation between the SPI NOR layer and the flash params. In order to test this, you'll have to merge v5.3-rc5 in spi-nor/next. This patch set depends on 'commit 834de5c1aa76 ("mtd: spi-nor: Fix the disabling of write protection at init") The scope of the "mtd: spi-nor: move manuf out of the core" batches, is to move all manufacturer specific code out of the spi-nor core. In the quest of removing the manufacturer specific code from the spi-nor core, we want to impose a timeline/priority on how the flash parameters are updated. As of now. the flash parameters initialization logic is as following: a/ default flash parameters init in spi_nor_init_params() b/ manufacturer specific flash parameters updates, split across entire spi-nor core code c/ flash parameters updates based on SFDP tables d/ post BFPT flash parameter updates With the "mtd: spi-nor: move manuf out of the core" batches, we want to impose the following sequence of calls: 1/ spi-nor core legacy flash parameters init: spi_nor_default_init_params() 2/ MFR-based manufacturer flash parameters init: nor->manufacturer->fixups->default_init() 3/ specific flash_info tweeks done when decisions can not be done just on MFR: nor->info->fixups->default_init() 4/ SFDP tables flash parameters init - SFDP knows better: spi_nor_sfdp_init_params() 5/ post SFDP tables flash parameters updates - in case manufacturers get the serial flash tables wrong or incomplete. nor->info->fixups->post_sfdp() The later can be extended to nor->manufacturer->fixups->post_sfdp() if needed. Setting of flash parameters will no longer be spread interleaved across the spi-nor core, there will be a clear separation on who and when will update the flash parameters. Tested on sst26vf064b with atmel-quadspi SPIMEM driver. Boris Brezillon (7): mtd: spi-nor: Add a default_init() fixup hook for gd25q256 mtd: spi-nor: Create a ->set_4byte() method mtd: spi-nor: Rework the SPI NOR lock/unlock logic mtd: spi-nor: Add post_sfdp() hook to tweak flash config mtd: spi-nor: Add spansion_post_sfdp_fixups() mtd: spi-nor: Add a ->convert_addr() method mtd: spi-nor: Add the SPI_NOR_XSR_RDY flag Tudor Ambarus (13): mtd: spi-nor: Regroup flash parameter and settings mtd: spi-nor: Use nor->params mtd: spi-nor: Drop quad_enable() from 'struct spi-nor' mtd: spi-nor: Move erase_map to 'struct spi_nor_flash_parameter' mtd: spi-nor: Add default_init() hook to tweak flash parameters mtd: spi_nor: Move manufacturer quad_enable() in ->default_init() mtd: spi-nor: Split spi_nor_init_params() mtd: spi_nor: Add a ->setup() method mtd: spi-nor: Add s3an_post_sfdp_fixups() mtd: spi-nor: Bring flash params init together mtd: spi_nor: Introduce spi_nor_set_addr_width() mtd: spi-nor: Introduce spi_nor_get_flash_info() mtd: spi-nor: Rework the disabling of block write protection drivers/mtd/spi-nor/spi-nor.c | 1304 +++++++++++++++++++++++------------------ include/linux/mtd/spi-nor.h | 298 +++++++--- 2 files changed, 927 insertions(+), 675 deletions(-)