[v2,0/7] mtd: spi-nor: move manuf out of the core - batch 1
mbox series

Message ID 20190824120027.14452-1-tudor.ambarus@microchip.com
Headers show
Series
  • mtd: spi-nor: move manuf out of the core - batch 1
Related show

Message

Ambarus Tudor Aug. 24, 2019, noon UTC
From: Tudor Ambarus <tudor.ambarus@microchip.com>

Depends on 'mtd: spi-nor: move manuf out of the core - batch 0' series:
https://patchwork.ozlabs.org/project/linux-mtd/list/?series=127030

v2:
- addressed all the comments
- all flash parameters and settings are now set in 'struct
  spi_nor_flash_parameter', for a clearer separation between the SPI NOR
  layer and the flash params.

The scope of the "mtd: spi-nor: move manuf out of the core" batches,
is to move all manufacturer specific code out of the spi-nor core.

In the quest of removing the manufacturer specific code from the spi-nor
core, we want to impose a timeline/priority on how the flash parameters
are updated. As of now. the flash parameters initialization logic is as
following:

    a/ default flash parameters init in spi_nor_init_params()
    b/ manufacturer specific flash parameters updates, split across entire
       spi-nor core code
    c/ flash parameters updates based on SFDP tables
    d/ post BFPT flash parameter updates

With the "mtd: spi-nor: move manuf out of the core" batches, we want to
impose the following sequence of calls:

    1/ spi-nor core legacy flash parameters init:
            spi_nor_default_init_params()

    2/ MFR-based manufacturer flash parameters init:
            nor->manufacturer->fixups->default_init()

    3/ specific flash_info tweeks done when decisions can not be done just
       on MFR:
            nor->info->fixups->default_init()

    4/ SFDP tables flash parameters init - SFDP knows better:
            spi_nor_sfdp_init_params()

    5/ post SFDP tables flash parameters updates - in case manufacturers
       get the serial flash tables wrong or incomplete.
            nor->info->fixups->post_sfdp()
       The later can be extended to nor->manufacturer->fixups->post_sfdp()
       if needed.

Setting of flash parameters will no longer be spread interleaved across
the spi-nor core, there will be a clear separation on who and when will
update the flash parameters.

Tested on sst26vf064b with atmel-quadspi SPIMEM driver.

Boris Brezillon (3):
  mtd: spi-nor: Add a default_init() fixup hook for gd25q256
  mtd: spi-nor: Create a ->set_4byte() method
  mtd: spi-nor: Rework the SPI NOR lock/unlock logic

Tudor Ambarus (4):
  mtd: spi-nor: Add default_init() hook to tweak flash parameters
  mtd: spi_nor: Move manufacturer quad_enable() in ->default_init()
  mtd: spi-nor: Split spi_nor_init_params()
  mtd: spi-nor: Rework the disabling of block write protection

 drivers/mtd/spi-nor/spi-nor.c | 320 ++++++++++++++++++++++++++++--------------
 include/linux/mtd/spi-nor.h   |  25 +++-
 2 files changed, 233 insertions(+), 112 deletions(-)