mbox series

[v2,0/2] act8865 regulator modes and suspend states

Message ID 1565721176-8955-1-git-send-email-raagjadav@gmail.com
Headers show
Series act8865 regulator modes and suspend states | expand

Message

Raag Jadav Aug. 13, 2019, 6:32 p.m. UTC 
This series implements operating mode and suspend state support for act8865.

Changes since v1:
- Added REGULATOR_MODE_FAST for DCDC regulators.
- get_mode() hook now reads values from the hardware.
- Removed op_mode[] from act8865 structure as it is no longer needed.
- Fixed ldo register addresses in set_mode() hook.
- Reverted act8865.h changes.

Raag Jadav (2):
  regulator: act8865: operating mode and suspend state support
  dt-bindings: regulator: act8865 regulator modes and suspend states

 .../bindings/regulator/act8865-regulator.txt       |  27 ++-
 drivers/regulator/act8865-regulator.c              | 187 ++++++++++++++++++++-
 .../regulator/active-semi,8865-regulator.h         |  28 +++
 3 files changed, 239 insertions(+), 3 deletions(-)
 create mode 100644 include/dt-bindings/regulator/active-semi,8865-regulator.h

Comments

Mark Brown Aug. 15, 2019, 4:52 p.m. UTC | #1 
On Wed, Aug 14, 2019 at 12:02:55AM +0530, Raag Jadav wrote:
> Implement ->set_mode(), ->get_mode() and ->set_suspend_xx() hooks
> for act8865 with unlocked expert registers.

This breaks the build because it depends on patch 2:

drivers/regulator/act8865-regulator.c:22:10: fatal error: dt-bindings/regulator/active-semi,8865-regulator.h: No such file or directory
 #include <dt-bindings/regulator/active-semi,8865-regulator.h>
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.