[v2,00/11] Arasan SDHCI enhancements and ZynqMP Tap Delays Handling
mbox series

Message ID 1561958991-21935-1-git-send-email-manish.narani@xilinx.com
Headers show
Series
  • Arasan SDHCI enhancements and ZynqMP Tap Delays Handling
Related show

Message

Manish Narani July 1, 2019, 5:29 a.m. UTC
This patch series does the following:
 - Reorganize the Clock Handling in Arasan SD driver
 - Adds new sampling clock in Arasan SD driver
 - Adds support to set Clock Delays in SD Arasan Driver
 - Add SDIO Tap Delay handling in ZynqMP firmware driver
 - Add support for ZynqMP Tap Delays setting in Arasan SD driver

Changes in v2:
	- Replaced the deprecated calls to clock framework APIs
	- Added support for dev_clk_get() call to work for SD card clock
	- Separated the clock data struct
	- Fragmented the patch series in smaller patches to make it more
	  readable

This patch series contains a DT patch, which I think should be there to
maintain the order of commits.

Manish Narani (11):
  dt-bindings: mmc: arasan: Update documentation for SD Card Clock
  arm64: dts: rockchip: Add optional clock property indicating sdcard
    clock
  mmc: sdhci-of-arasan: Replace deprecated clk API calls
  mmc: sdhci-of-arasan: Separate out clk related data to another
    structure
  dt-bindings: mmc: arasan: Update Documentation for the input clock
  mmc: sdhci-of-arasan: Add sampling clock for a phy to use
  dt-bindings: mmc: arasan: Add optional properties for Arasan SDHCI
  mmc: sdhci-of-arasan: Add support to set clock phase delays for SD
  firmware: xilinx: Add SDIO Tap Delay APIs
  dt-bindings: mmc: arasan: Document 'xlnx,zynqmp-8.9a' controller
  mmc: sdhci-of-arasan: Add support for ZynqMP Platform Tap Delays Setup

 .../devicetree/bindings/mmc/arasan,sdhci.txt       |  49 ++-
 arch/arm64/boot/dts/rockchip/rk3399.dtsi           |   4 +-
 drivers/firmware/xilinx/zynqmp.c                   |  48 +++
 drivers/mmc/host/sdhci-of-arasan.c                 | 453 ++++++++++++++++++++-
 include/linux/firmware/xlnx-zynqmp.h               |  15 +-
 5 files changed, 540 insertions(+), 29 deletions(-)

Comments

Jolly Shah July 1, 2019, 6:06 p.m. UTC | #1
Hi Manish,

> -----Original Message-----
> From: Manish Narani <manish.narani@xilinx.com>
> Sent: Sunday, June 30, 2019 10:30 PM
> To: ulf.hansson@linaro.org; robh+dt@kernel.org; mark.rutland@arm.com;
> heiko@sntech.de; Michal Simek <michals@xilinx.com>;
> adrian.hunter@intel.com; christoph.muellner@theobroma-systems.com;
> philipp.tomsich@theobroma-systems.com; viresh.kumar@linaro.org;
> scott.branden@broadcom.com; ayaka@soulik.info; kernel@esmil.dk;
> tony.xie@rock-chips.com; Rajan Vaja <RAJANV@xilinx.com>; Jolly Shah
> <JOLLYS@xilinx.com>; Nava kishore Manne <navam@xilinx.com>;
> mdf@kernel.org; Manish Narani <MNARANI@xilinx.com>; olof@lixom.net
> Cc: linux-mmc@vger.kernel.org; devicetree@vger.kernel.org; linux-
> kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> rockchip@lists.infradead.org
> Subject: [PATCH v2 09/11] firmware: xilinx: Add SDIO Tap Delay APIs
> 
> Add APIs for setting SDIO Tap Delays on ZynqMP platform.
> 
> Signed-off-by: Manish Narani <manish.narani@xilinx.com>
> ---
>  drivers/firmware/xilinx/zynqmp.c     | 48
> ++++++++++++++++++++++++++++++++++++
>  include/linux/firmware/xlnx-zynqmp.h | 15 ++++++++++-
>  2 files changed, 62 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
> index fd3d837..b81f1be 100644
> --- a/drivers/firmware/xilinx/zynqmp.c
> +++ b/drivers/firmware/xilinx/zynqmp.c
> @@ -664,6 +664,52 @@ static int zynqmp_pm_set_requirement(const u32
> node, const u32 capabilities,
>  				   qos, ack, NULL);
>  }
> 
> +/**
> + * zynqmp_pm_sdio_out_setphase() - PM call to set clock output delays for SD
> + * @device_id:		Device ID of the SD controller
> + * @tap_delay:		Tap Delay value for output clock
> + *
> + * This API function is to be used for setting the clock output delays for SD
> + * clock.
> + *
> + * Return: Returns status, either success or error+reason
> + */
> +static int zynqmp_pm_sdio_out_setphase(u32 device_id, u8 tap_delay)
> +{
> +	u32 node_id = (!device_id) ? NODE_SD_0 : NODE_SD_1;
> +	int ret;
> +
> +	ret = zynqmp_pm_ioctl(node_id, IOCTL_SET_SD_TAPDELAY,
> +			      PM_TAPDELAY_OUTPUT, tap_delay, NULL);
> +	if (ret)
> +		pr_err("Error setting Output Tap Delay\n");
> +
> +	return ret;
> +}
> +
> +/**
> + * zynqmp_pm_sdio_in_setphase() - PM call to set clock input delays for SD
> + * @device_id:		Device ID of the SD controller
> + * @tap_delay:		Tap Delay value for input clock
> + *
> + * This API function is to be used for setting the clock input delays for SD
> + * clock.
> + *
> + * Return: Returns status, either success or error+reason
> + */
> +static int zynqmp_pm_sdio_in_setphase(u32 device_id, u8 tap_delay)
> +{
> +	u32 node_id = (!device_id) ? NODE_SD_0 : NODE_SD_1;
> +	int ret;
> +
> +	ret = zynqmp_pm_ioctl(node_id, IOCTL_SET_SD_TAPDELAY,
> +			      PM_TAPDELAY_INPUT, tap_delay, NULL);
> +	if (ret)
> +		pr_err("Error setting Input Tap Delay\n");
> +
> +	return ret;
> +}
> +
>  static const struct zynqmp_eemi_ops eemi_ops = {
>  	.get_api_version = zynqmp_pm_get_api_version,
>  	.get_chipid = zynqmp_pm_get_chipid,
> @@ -687,6 +733,8 @@ static const struct zynqmp_eemi_ops eemi_ops = {
>  	.set_requirement = zynqmp_pm_set_requirement,
>  	.fpga_load = zynqmp_pm_fpga_load,
>  	.fpga_get_status = zynqmp_pm_fpga_get_status,
> +	.sdio_out_setphase = zynqmp_pm_sdio_out_setphase,
> +	.sdio_in_setphase = zynqmp_pm_sdio_in_setphase,

Are these eemi APIs? You are using ioctl eemi api to set the delay.

Thanks,
Jolly Shah

>  };
> 
>  /**
> diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-
> zynqmp.h
> index 1262ea6..d9b53e5 100644
> --- a/include/linux/firmware/xlnx-zynqmp.h
> +++ b/include/linux/firmware/xlnx-zynqmp.h
> @@ -92,7 +92,8 @@ enum pm_ret_status {
>  };
> 
>  enum pm_ioctl_id {
> -	IOCTL_SET_PLL_FRAC_MODE = 8,
> +	IOCTL_SET_SD_TAPDELAY = 7,
> +	IOCTL_SET_PLL_FRAC_MODE,
>  	IOCTL_GET_PLL_FRAC_MODE,
>  	IOCTL_SET_PLL_FRAC_DATA,
>  	IOCTL_GET_PLL_FRAC_DATA,
> @@ -251,6 +252,16 @@ enum zynqmp_pm_request_ack {
>  	ZYNQMP_PM_REQUEST_ACK_NON_BLOCKING,
>  };
> 
> +enum pm_node_id {
> +	NODE_SD_0 = 39,
> +	NODE_SD_1,
> +};
> +
> +enum tap_delay_type {
> +	PM_TAPDELAY_INPUT = 0,
> +	PM_TAPDELAY_OUTPUT,
> +};
> +
>  /**
>   * struct zynqmp_pm_query_data - PM query data
>   * @qid:	query ID
> @@ -295,6 +306,8 @@ struct zynqmp_eemi_ops {
>  			       const u32 capabilities,
>  			       const u32 qos,
>  			       const enum zynqmp_pm_request_ack ack);
> +	int (*sdio_out_setphase)(u32 device_id, u8 tap_delay);
> +	int (*sdio_in_setphase)(u32 device_id, u8 tap_delay);
>  };
> 
>  int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
> --
> 2.1.1
Manish Narani July 2, 2019, 5:03 a.m. UTC | #2
Hi Jolly,


> -----Original Message-----
> From: Jolly Shah
> Sent: Monday, July 1, 2019 11:36 PM
> To: Manish Narani <MNARANI@xilinx.com>; ulf.hansson@linaro.org;
> robh+dt@kernel.org; mark.rutland@arm.com; heiko@sntech.de; Michal Simek
> <michals@xilinx.com>; adrian.hunter@intel.com;
> christoph.muellner@theobroma-systems.com; philipp.tomsich@theobroma-
> systems.com; viresh.kumar@linaro.org; scott.branden@broadcom.com;
> ayaka@soulik.info; kernel@esmil.dk; tony.xie@rock-chips.com; Rajan Vaja
> <RAJANV@xilinx.com>; Nava kishore Manne <navam@xilinx.com>;
> mdf@kernel.org; Manish Narani <MNARANI@xilinx.com>; olof@lixom.net
> Cc: linux-mmc@vger.kernel.org; devicetree@vger.kernel.org; linux-
> kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> rockchip@lists.infradead.org
> Subject: RE: [PATCH v2 09/11] firmware: xilinx: Add SDIO Tap Delay APIs
> 
> Hi Manish,
> 
> > -----Original Message-----
> > From: Manish Narani <manish.narani@xilinx.com>
> > Sent: Sunday, June 30, 2019 10:30 PM
> > To: ulf.hansson@linaro.org; robh+dt@kernel.org; mark.rutland@arm.com;
> > heiko@sntech.de; Michal Simek <michals@xilinx.com>;
> > adrian.hunter@intel.com; christoph.muellner@theobroma-systems.com;
> > philipp.tomsich@theobroma-systems.com; viresh.kumar@linaro.org;
> > scott.branden@broadcom.com; ayaka@soulik.info; kernel@esmil.dk;
> > tony.xie@rock-chips.com; Rajan Vaja <RAJANV@xilinx.com>; Jolly Shah
> > <JOLLYS@xilinx.com>; Nava kishore Manne <navam@xilinx.com>;
> > mdf@kernel.org; Manish Narani <MNARANI@xilinx.com>; olof@lixom.net
> > Cc: linux-mmc@vger.kernel.org; devicetree@vger.kernel.org; linux-
> > kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> > rockchip@lists.infradead.org
> > Subject: [PATCH v2 09/11] firmware: xilinx: Add SDIO Tap Delay APIs
> >
> > Add APIs for setting SDIO Tap Delays on ZynqMP platform.
> >
> > Signed-off-by: Manish Narani <manish.narani@xilinx.com>
> > ---
> >  drivers/firmware/xilinx/zynqmp.c     | 48
> > ++++++++++++++++++++++++++++++++++++
> >  include/linux/firmware/xlnx-zynqmp.h | 15 ++++++++++-
> >  2 files changed, 62 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/firmware/xilinx/zynqmp.c
> b/drivers/firmware/xilinx/zynqmp.c
> > index fd3d837..b81f1be 100644
> > --- a/drivers/firmware/xilinx/zynqmp.c
> > +++ b/drivers/firmware/xilinx/zynqmp.c
> > @@ -664,6 +664,52 @@ static int zynqmp_pm_set_requirement(const u32
> > node, const u32 capabilities,
> >  				   qos, ack, NULL);
> >  }
> >
> > +/**
> > + * zynqmp_pm_sdio_out_setphase() - PM call to set clock output delays for
> SD
> > + * @device_id:		Device ID of the SD controller
> > + * @tap_delay:		Tap Delay value for output clock
> > + *
> > + * This API function is to be used for setting the clock output delays for SD
> > + * clock.
> > + *
> > + * Return: Returns status, either success or error+reason
> > + */
> > +static int zynqmp_pm_sdio_out_setphase(u32 device_id, u8 tap_delay)
> > +{
> > +	u32 node_id = (!device_id) ? NODE_SD_0 : NODE_SD_1;
> > +	int ret;
> > +
> > +	ret = zynqmp_pm_ioctl(node_id, IOCTL_SET_SD_TAPDELAY,
> > +			      PM_TAPDELAY_OUTPUT, tap_delay, NULL);
> > +	if (ret)
> > +		pr_err("Error setting Output Tap Delay\n");
> > +
> > +	return ret;
> > +}
> > +
> > +/**
> > + * zynqmp_pm_sdio_in_setphase() - PM call to set clock input delays for SD
> > + * @device_id:		Device ID of the SD controller
> > + * @tap_delay:		Tap Delay value for input clock
> > + *
> > + * This API function is to be used for setting the clock input delays for SD
> > + * clock.
> > + *
> > + * Return: Returns status, either success or error+reason
> > + */
> > +static int zynqmp_pm_sdio_in_setphase(u32 device_id, u8 tap_delay)
> > +{
> > +	u32 node_id = (!device_id) ? NODE_SD_0 : NODE_SD_1;
> > +	int ret;
> > +
> > +	ret = zynqmp_pm_ioctl(node_id, IOCTL_SET_SD_TAPDELAY,
> > +			      PM_TAPDELAY_INPUT, tap_delay, NULL);
> > +	if (ret)
> > +		pr_err("Error setting Input Tap Delay\n");
> > +
> > +	return ret;
> > +}
> > +
> >  static const struct zynqmp_eemi_ops eemi_ops = {
> >  	.get_api_version = zynqmp_pm_get_api_version,
> >  	.get_chipid = zynqmp_pm_get_chipid,
> > @@ -687,6 +733,8 @@ static const struct zynqmp_eemi_ops eemi_ops = {
> >  	.set_requirement = zynqmp_pm_set_requirement,
> >  	.fpga_load = zynqmp_pm_fpga_load,
> >  	.fpga_get_status = zynqmp_pm_fpga_get_status,
> > +	.sdio_out_setphase = zynqmp_pm_sdio_out_setphase,
> > +	.sdio_in_setphase = zynqmp_pm_sdio_in_setphase,
> 
> Are these eemi APIs? You are using ioctl eemi api to set the delay.

Yes, I am making these eemi APIs and calling ioctl API from these. This is to make the SD driver code more readable.

Thanks,
Manish
Adrian Hunter July 10, 2019, 11:33 a.m. UTC | #3
On 1/07/19 8:29 AM, Manish Narani wrote:
> This patch series does the following:
>  - Reorganize the Clock Handling in Arasan SD driver
>  - Adds new sampling clock in Arasan SD driver
>  - Adds support to set Clock Delays in SD Arasan Driver
>  - Add SDIO Tap Delay handling in ZynqMP firmware driver
>  - Add support for ZynqMP Tap Delays setting in Arasan SD driver
> 
> Changes in v2:
> 	- Replaced the deprecated calls to clock framework APIs
> 	- Added support for dev_clk_get() call to work for SD card clock
> 	- Separated the clock data struct
> 	- Fragmented the patch series in smaller patches to make it more
> 	  readable
> 
> This patch series contains a DT patch, which I think should be there to
> maintain the order of commits.
> 
> Manish Narani (11):
>   dt-bindings: mmc: arasan: Update documentation for SD Card Clock
>   arm64: dts: rockchip: Add optional clock property indicating sdcard
>     clock
>   mmc: sdhci-of-arasan: Replace deprecated clk API calls
>   mmc: sdhci-of-arasan: Separate out clk related data to another
>     structure
>   dt-bindings: mmc: arasan: Update Documentation for the input clock
>   mmc: sdhci-of-arasan: Add sampling clock for a phy to use
>   dt-bindings: mmc: arasan: Add optional properties for Arasan SDHCI
>   mmc: sdhci-of-arasan: Add support to set clock phase delays for SD
>   firmware: xilinx: Add SDIO Tap Delay APIs
>   dt-bindings: mmc: arasan: Document 'xlnx,zynqmp-8.9a' controller
>   mmc: sdhci-of-arasan: Add support for ZynqMP Platform Tap Delays Setup
> 
>  .../devicetree/bindings/mmc/arasan,sdhci.txt       |  49 ++-
>  arch/arm64/boot/dts/rockchip/rk3399.dtsi           |   4 +-
>  drivers/firmware/xilinx/zynqmp.c                   |  48 +++
>  drivers/mmc/host/sdhci-of-arasan.c                 | 453 ++++++++++++++++++++-
>  include/linux/firmware/xlnx-zynqmp.h               |  15 +-
>  5 files changed, 540 insertions(+), 29 deletions(-)
> 

For SDHCI:

Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Manish Narani July 15, 2019, 7:15 a.m. UTC | #4
Ping!

> -----Original Message-----
> From: Manish Narani <manish.narani@xilinx.com>
> Sent: Monday, July 1, 2019 11:00 AM
> To: ulf.hansson@linaro.org; robh+dt@kernel.org; mark.rutland@arm.com;
> heiko@sntech.de; Michal Simek <michals@xilinx.com>;
> adrian.hunter@intel.com; christoph.muellner@theobroma-systems.com;
> philipp.tomsich@theobroma-systems.com; viresh.kumar@linaro.org;
> scott.branden@broadcom.com; ayaka@soulik.info; kernel@esmil.dk;
> tony.xie@rock-chips.com; Rajan Vaja <RAJANV@xilinx.com>; Jolly Shah
> <JOLLYS@xilinx.com>; Nava kishore Manne <navam@xilinx.com>;
> mdf@kernel.org; Manish Narani <MNARANI@xilinx.com>; olof@lixom.net
> Cc: linux-mmc@vger.kernel.org; devicetree@vger.kernel.org; linux-
> kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> rockchip@lists.infradead.org
> Subject: [PATCH v2 00/11] Arasan SDHCI enhancements and ZynqMP Tap
> Delays Handling
> 
> This patch series does the following:
>  - Reorganize the Clock Handling in Arasan SD driver
>  - Adds new sampling clock in Arasan SD driver
>  - Adds support to set Clock Delays in SD Arasan Driver
>  - Add SDIO Tap Delay handling in ZynqMP firmware driver
>  - Add support for ZynqMP Tap Delays setting in Arasan SD driver
> 
> Changes in v2:
> 	- Replaced the deprecated calls to clock framework APIs
> 	- Added support for dev_clk_get() call to work for SD card clock
> 	- Separated the clock data struct
> 	- Fragmented the patch series in smaller patches to make it more
> 	  readable
> 
> This patch series contains a DT patch, which I think should be there to
> maintain the order of commits.
> 
> Manish Narani (11):
>   dt-bindings: mmc: arasan: Update documentation for SD Card Clock
>   arm64: dts: rockchip: Add optional clock property indicating sdcard
>     clock
>   mmc: sdhci-of-arasan: Replace deprecated clk API calls
>   mmc: sdhci-of-arasan: Separate out clk related data to another
>     structure
>   dt-bindings: mmc: arasan: Update Documentation for the input clock
>   mmc: sdhci-of-arasan: Add sampling clock for a phy to use
>   dt-bindings: mmc: arasan: Add optional properties for Arasan SDHCI
>   mmc: sdhci-of-arasan: Add support to set clock phase delays for SD
>   firmware: xilinx: Add SDIO Tap Delay APIs
>   dt-bindings: mmc: arasan: Document 'xlnx,zynqmp-8.9a' controller
>   mmc: sdhci-of-arasan: Add support for ZynqMP Platform Tap Delays Setup
> 
>  .../devicetree/bindings/mmc/arasan,sdhci.txt       |  49 ++-
>  arch/arm64/boot/dts/rockchip/rk3399.dtsi           |   4 +-
>  drivers/firmware/xilinx/zynqmp.c                   |  48 +++
>  drivers/mmc/host/sdhci-of-arasan.c                 | 453 ++++++++++++++++++++-
>  include/linux/firmware/xlnx-zynqmp.h               |  15 +-
>  5 files changed, 540 insertions(+), 29 deletions(-)
> 
> --
> 2.1.1
Manish Narani July 22, 2019, 4:56 a.m. UTC | #5
Gentle Ping!

> -----Original Message-----
> From: Manish Narani
> Sent: Monday, July 15, 2019 12:46 PM
> To: Manish Narani <MNARANI@xilinx.com>; ulf.hansson@linaro.org;
> robh+dt@kernel.org; mark.rutland@arm.com; heiko@sntech.de; Michal Simek
> <michals@xilinx.com>; adrian.hunter@intel.com;
> christoph.muellner@theobroma-systems.com; philipp.tomsich@theobroma-
> systems.com; viresh.kumar@linaro.org; scott.branden@broadcom.com;
> ayaka@soulik.info; kernel@esmil.dk; tony.xie@rock-chips.com;
> mdf@kernel.org; olof@lixom.net
> Cc: linux-mmc@vger.kernel.org; devicetree@vger.kernel.org; linux-
> kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> rockchip@lists.infradead.org
> Subject: RE: [PATCH v2 00/11] Arasan SDHCI enhancements and ZynqMP Tap
> Delays Handling
> 
> Ping!
> 
> > -----Original Message-----
> > From: Manish Narani <manish.narani@xilinx.com>
> > Sent: Monday, July 1, 2019 11:00 AM
> > To: ulf.hansson@linaro.org; robh+dt@kernel.org; mark.rutland@arm.com;
> > heiko@sntech.de; Michal Simek <michals@xilinx.com>;
> > adrian.hunter@intel.com; christoph.muellner@theobroma-systems.com;
> > philipp.tomsich@theobroma-systems.com; viresh.kumar@linaro.org;
> > scott.branden@broadcom.com; ayaka@soulik.info; kernel@esmil.dk;
> > tony.xie@rock-chips.com; Rajan Vaja <RAJANV@xilinx.com>; Jolly Shah
> > <JOLLYS@xilinx.com>; Nava kishore Manne <navam@xilinx.com>;
> > mdf@kernel.org; Manish Narani <MNARANI@xilinx.com>; olof@lixom.net
> > Cc: linux-mmc@vger.kernel.org; devicetree@vger.kernel.org; linux-
> > kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> > rockchip@lists.infradead.org
> > Subject: [PATCH v2 00/11] Arasan SDHCI enhancements and ZynqMP Tap
> > Delays Handling
> >
> > This patch series does the following:
> >  - Reorganize the Clock Handling in Arasan SD driver
> >  - Adds new sampling clock in Arasan SD driver
> >  - Adds support to set Clock Delays in SD Arasan Driver
> >  - Add SDIO Tap Delay handling in ZynqMP firmware driver
> >  - Add support for ZynqMP Tap Delays setting in Arasan SD driver
> >
> > Changes in v2:
> > 	- Replaced the deprecated calls to clock framework APIs
> > 	- Added support for dev_clk_get() call to work for SD card clock
> > 	- Separated the clock data struct
> > 	- Fragmented the patch series in smaller patches to make it more
> > 	  readable
> >
> > This patch series contains a DT patch, which I think should be there to
> > maintain the order of commits.
> >
> > Manish Narani (11):
> >   dt-bindings: mmc: arasan: Update documentation for SD Card Clock
> >   arm64: dts: rockchip: Add optional clock property indicating sdcard
> >     clock
> >   mmc: sdhci-of-arasan: Replace deprecated clk API calls
> >   mmc: sdhci-of-arasan: Separate out clk related data to another
> >     structure
> >   dt-bindings: mmc: arasan: Update Documentation for the input clock
> >   mmc: sdhci-of-arasan: Add sampling clock for a phy to use
> >   dt-bindings: mmc: arasan: Add optional properties for Arasan SDHCI
> >   mmc: sdhci-of-arasan: Add support to set clock phase delays for SD
> >   firmware: xilinx: Add SDIO Tap Delay APIs
> >   dt-bindings: mmc: arasan: Document 'xlnx,zynqmp-8.9a' controller
> >   mmc: sdhci-of-arasan: Add support for ZynqMP Platform Tap Delays Setup
> >
> >  .../devicetree/bindings/mmc/arasan,sdhci.txt       |  49 ++-
> >  arch/arm64/boot/dts/rockchip/rk3399.dtsi           |   4 +-
> >  drivers/firmware/xilinx/zynqmp.c                   |  48 +++
> >  drivers/mmc/host/sdhci-of-arasan.c                 | 453
> ++++++++++++++++++++-
> >  include/linux/firmware/xlnx-zynqmp.h               |  15 +-
> >  5 files changed, 540 insertions(+), 29 deletions(-)
> >
> > --
> > 2.1.1