mbox series

[v1,0/1] mtd: devices: add ACPI support for non-jedec m25p80

Message ID 1551178088-6615-1-git-send-email-f.suligoi@asem.it
Headers show
Series mtd: devices: add ACPI support for non-jedec m25p80 | expand

Message

Flavio Suligoi Feb. 26, 2019, 10:48 a.m. UTC 
This patch concerns the use of a "non-jedec" m25p80 device in a x86 machine.

For an x86 machine a m25p80 device has to be declared inside a BIOS ACPI table
(for example inside the SSDT or the DSDT table).

No matching problems for the jedec compatible devices, since we have the list:

static const struct of_device_id m25p_of_table[] = {
	{ .compatible = "jedec,spi-nor" },
	{}
};

But for the "non-jedec" devices there are no possible matches, even if we try to
use, the SPI modalias, as:

spi:mr25h40

So it is necessary filling the m25p_of_table with all the m25p80 device names
used in the driver. This solution works both for the ACPI-style (x86) and 
the DT-style declarations (ARM).
I checked this patch with:

1) x68 board using both an SSDT and DSDT tables
2) i.MX6DL custom board using a Device Tree 

This is an example of working SSDT table for x86:

DefinitionBlock ("mr25h40.aml", "SSDT", 5, "ASEMsp", "MR25H40", 1)
{
	External (_SB.SPI1, DeviceObj)

	Scope (\_SB.SPI1)
	{
		Device (NVR0)
		{
			Name (_HID, "PRP0001")
			Name (_DDN, "Everspin MR25H40 MRAM")
			Name (_CRS, ResourceTemplate () {
				SpiSerialBus (
				1,                      // Chip select
				PolarityLow,            // Chip select is active low
				FourWireMode,           // Full duplex
				8,                      // Bits per word is 8 (byte)
				ControllerInitiated,    // Don't care
				10000000,               // 10 MHz
				ClockPolarityLow,       // SPI mode 0 ClockPolarityLow
				ClockPhaseFirst,        // SPI mode 0 ClockPhaseFirst
				"\\_SB.SPI1",      	// SPI host controller
				0,			// Must be 0
				ResourceConsumer,
				,
				)
			})

			Name (_DSD, Package () {
				ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
				Package () {
					Package () {"compatible", "mr25h40"},
				}
			})
		}
	}
}

Flavio Suligoi (1):
  mtd: devices: add ACPI support for non-jedec m25p80

 drivers/mtd/devices/m25p80.c | 57 +++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 56 insertions(+), 1 deletion(-)