| Message ID | 1425456947-4152-1-git-send-email-mamlinav@gmail.com |
|---|---|
| State | Needs Review / ACK, archived |
| Headers | show |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | warning | total: 1 errors, 1 warnings, 0 lines checked |
| robh/patch-applied | success |
On Wed, Mar 04, 2015 at 11:15:47AM +0300, Aleksei Mamlin wrote: > This patch add support for Wexler TAB7200 tablet. > > The Wexler TAB7200 is a A20 based tablet with 7 inch display(800x480), > capacitive touchscreen(5 fingers), 1G RAM, 4G NAND, micro SD card slot, > mini HDMI port, 3.5mm audio plug, 1 USB OTG port and 1 USB 2.0 port. > > Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> > --- > .../devicetree/bindings/vendor-prefixes.txt | 1 + > arch/arm/boot/dts/Makefile | 3 +- > arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 185 +++++++++++++++++++++ > 3 files changed, 188 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts > > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt > index 389ca13..eb67da4 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt > @@ -189,6 +189,7 @@ variscite Variscite Ltd. > via VIA Technologies, Inc. > virtio Virtual I/O Device Specification, developed by the OASIS consortium > voipac Voipac Technologies s.r.o. > +wexler AVIRSA Electronics Why a different name? Also, please make that a separate patch. > winbond Winbond Electronics corp. > wlf Wolfson Microelectronics > wm Wondermedia Technologies, Inc. > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index beac15f..f6dc2ac 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -550,7 +550,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \ > sun7i-a20-olinuxino-lime2.dtb \ > sun7i-a20-olinuxino-micro.dtb \ > sun7i-a20-pcduino3.dtb \ > - sun7i-a20-pcduino3-nano.dtb > + sun7i-a20-pcduino3-nano.dtb \ > + sun7i-a20-wexler-tab7200.dtb > dtb-$(CONFIG_MACH_SUN8I) += \ > sun8i-a23-ippo-q8h-v5.dtb \ > sun8i-a23-ippo-q8h-v1.2.dtb > diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts > new file mode 100644 > index 0000000..d50f40b > --- /dev/null > +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts > @@ -0,0 +1,185 @@ > +/* > + * Copyright 2015 Aleksei Mamlin > + * Aleksei Mamlin <mamlinav@gmail.com> > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License, or (at your option) any later version. > + * > + * This file is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public > + * License along with this file; if not, write to the Free > + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, > + * MA 02110-1301 USA > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +/dts-v1/; > +#include "sun7i-a20.dtsi" > +#include "sunxi-common-regulators.dtsi" > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/interrupt-controller/irq.h> > +#include <dt-bindings/pinctrl/sun4i-a10.h> > + > +/ { > + model = "Wexler TAB7200"; > + compatible = "wexler,tab7200", "allwinner,sun7i-a20"; > +}; > + > +&cpu0 { > + cpu-supply = <®_dcdc2>; > +}; > + > +&ehci0 { > + status = "okay"; > +}; > + > +&ehci1 { > + status = "okay"; > +}; > + > +&i2c0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c0_pins_a>; > + status = "okay"; > + > + axp209: pmic@34 { > + compatible = "x-powers,axp209"; > + reg = <0x34>; > + interrupt-parent = <&nmi_intc>; > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > + > + interrupt-controller; > + #interrupt-cells = <1>; > + }; > +}; > + > +&i2c1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c1_pins_a>; > + status = "okay"; > +}; > + > +&i2c2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c2_pins_a>; > + status = "okay"; > +}; > + > +&lradc { > + vref-supply = <®_vcc3v0>; > + status = "okay"; > + > + button@571 { > + label = "Volume Up"; > + linux,code = <KEY_VOLUMEUP>; > + channel = <0>; > + voltage = <571428>; > + }; > + > + button@761 { > + label = "Volume Down"; > + linux,code = <KEY_VOLUMEDOWN>; > + channel = <0>; > + voltage = <761904>; > + }; > +}; > + > +&mmc0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; > + vmmc-supply = <®_vcc3v3>; > + bus-width = <4>; > + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ > + cd-inverted; > + status = "okay"; > +}; > + > +&ohci0 { > + status = "okay"; > +}; > + > +&ohci1 { > + status = "okay"; > +}; > + > +#include "axp209.dtsi" > + > +®_dcdc2 { > + regulator-always-on; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1450000>; > + regulator-name = "vdd-cpu"; > +}; > + > +®_dcdc3 { > + regulator-always-on; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1400000>; > + regulator-name = "vdd-int-dll"; > +}; > + > +®_ldo1 { > + regulator-name = "vdd-rtc"; > +}; > + > +®_ldo2 { > + regulator-always-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-name = "avcc"; > +}; > + > +®_usb1_vbus { > + status = "okay"; > +}; > + > +®_usb2_vbus { > + status = "okay"; > +}; > + > +&uart0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_pins_a>; > + status = "okay"; > +}; > + > +&usbphy { > + usb1_vbus-supply = <®_usb1_vbus>; > + usb2_vbus-supply = <®_usb2_vbus>; > + status = "okay"; > +}; > -- > 2.0.5 > It looks fine otherwise. Thanks! Maxime
On Wed, 4 Mar 2015 21:18:19 +0100 Maxime Ripard <maxime.ripard@free-electrons.com> wrote: > On Wed, Mar 04, 2015 at 11:15:47AM +0300, Aleksei Mamlin wrote: > > This patch add support for Wexler TAB7200 tablet. > > > > The Wexler TAB7200 is a A20 based tablet with 7 inch display(800x480), > > capacitive touchscreen(5 fingers), 1G RAM, 4G NAND, micro SD card slot, > > mini HDMI port, 3.5mm audio plug, 1 USB OTG port and 1 USB 2.0 port. > > > > Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> > > --- > > .../devicetree/bindings/vendor-prefixes.txt | 1 + > > arch/arm/boot/dts/Makefile | 3 +- > > arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 185 +++++++++++++++++++++ > > 3 files changed, 188 insertions(+), 1 deletion(-) > > create mode 100644 arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts > > > > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt > > index 389ca13..eb67da4 100644 > > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt > > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt > > @@ -189,6 +189,7 @@ variscite Variscite Ltd. > > via VIA Technologies, Inc. > > virtio Virtual I/O Device Specification, developed by the OASIS consortium > > voipac Voipac Technologies s.r.o. > > +wexler AVIRSA Electronics > > Why a different name? WEXLER trademark owned by AVIRSA Electronics, a member of the diversified holding AVIRSA. > > Also, please make that a separate patch. > Ok, I'll do > > winbond Winbond Electronics corp. > > wlf Wolfson Microelectronics > > wm Wondermedia Technologies, Inc. > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > > index beac15f..f6dc2ac 100644 > > --- a/arch/arm/boot/dts/Makefile > > +++ b/arch/arm/boot/dts/Makefile > > @@ -550,7 +550,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \ > > sun7i-a20-olinuxino-lime2.dtb \ > > sun7i-a20-olinuxino-micro.dtb \ > > sun7i-a20-pcduino3.dtb \ > > - sun7i-a20-pcduino3-nano.dtb > > + sun7i-a20-pcduino3-nano.dtb \ > > + sun7i-a20-wexler-tab7200.dtb > > dtb-$(CONFIG_MACH_SUN8I) += \ > > sun8i-a23-ippo-q8h-v5.dtb \ > > sun8i-a23-ippo-q8h-v1.2.dtb > > diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts > > new file mode 100644 > > index 0000000..d50f40b > > --- /dev/null > > +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts > > @@ -0,0 +1,185 @@ > > +/* > > + * Copyright 2015 Aleksei Mamlin > > + * Aleksei Mamlin <mamlinav@gmail.com> > > + * > > + * This file is dual-licensed: you can use it either under the terms > > + * of the GPL or the X11 license, at your option. Note that this dual > > + * licensing only applies to this file, and not this project as a > > + * whole. > > + * > > + * a) This file is free software; you can redistribute it and/or > > + * modify it under the terms of the GNU General Public License as > > + * published by the Free Software Foundation; either version 2 of the > > + * License, or (at your option) any later version. > > + * > > + * This file is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + * > > + * You should have received a copy of the GNU General Public > > + * License along with this file; if not, write to the Free > > + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, > > + * MA 02110-1301 USA > > + * > > + * Or, alternatively, > > + * > > + * b) Permission is hereby granted, free of charge, to any person > > + * obtaining a copy of this software and associated documentation > > + * files (the "Software"), to deal in the Software without > > + * restriction, including without limitation the rights to use, > > + * copy, modify, merge, publish, distribute, sublicense, and/or > > + * sell copies of the Software, and to permit persons to whom the > > + * Software is furnished to do so, subject to the following > > + * conditions: > > + * > > + * The above copyright notice and this permission notice shall be > > + * included in all copies or substantial portions of the Software. > > + * > > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > > + * OTHER DEALINGS IN THE SOFTWARE. > > + */ > > + > > +/dts-v1/; > > +#include "sun7i-a20.dtsi" > > +#include "sunxi-common-regulators.dtsi" > > + > > +#include <dt-bindings/gpio/gpio.h> > > +#include <dt-bindings/input/input.h> > > +#include <dt-bindings/interrupt-controller/irq.h> > > +#include <dt-bindings/pinctrl/sun4i-a10.h> > > + > > +/ { > > + model = "Wexler TAB7200"; > > + compatible = "wexler,tab7200", "allwinner,sun7i-a20"; > > +}; > > + > > +&cpu0 { > > + cpu-supply = <®_dcdc2>; > > +}; > > + > > +&ehci0 { > > + status = "okay"; > > +}; > > + > > +&ehci1 { > > + status = "okay"; > > +}; > > + > > +&i2c0 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&i2c0_pins_a>; > > + status = "okay"; > > + > > + axp209: pmic@34 { > > + compatible = "x-powers,axp209"; > > + reg = <0x34>; > > + interrupt-parent = <&nmi_intc>; > > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > > + > > + interrupt-controller; > > + #interrupt-cells = <1>; > > + }; > > +}; > > + > > +&i2c1 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&i2c1_pins_a>; > > + status = "okay"; > > +}; > > + > > +&i2c2 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&i2c2_pins_a>; > > + status = "okay"; > > +}; > > + > > +&lradc { > > + vref-supply = <®_vcc3v0>; > > + status = "okay"; > > + > > + button@571 { > > + label = "Volume Up"; > > + linux,code = <KEY_VOLUMEUP>; > > + channel = <0>; > > + voltage = <571428>; > > + }; > > + > > + button@761 { > > + label = "Volume Down"; > > + linux,code = <KEY_VOLUMEDOWN>; > > + channel = <0>; > > + voltage = <761904>; > > + }; > > +}; > > + > > +&mmc0 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; > > + vmmc-supply = <®_vcc3v3>; > > + bus-width = <4>; > > + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ > > + cd-inverted; > > + status = "okay"; > > +}; > > + > > +&ohci0 { > > + status = "okay"; > > +}; > > + > > +&ohci1 { > > + status = "okay"; > > +}; > > + > > +#include "axp209.dtsi" > > + > > +®_dcdc2 { > > + regulator-always-on; > > + regulator-min-microvolt = <1000000>; > > + regulator-max-microvolt = <1450000>; > > + regulator-name = "vdd-cpu"; > > +}; > > + > > +®_dcdc3 { > > + regulator-always-on; > > + regulator-min-microvolt = <1000000>; > > + regulator-max-microvolt = <1400000>; > > + regulator-name = "vdd-int-dll"; > > +}; > > + > > +®_ldo1 { > > + regulator-name = "vdd-rtc"; > > +}; > > + > > +®_ldo2 { > > + regulator-always-on; > > + regulator-min-microvolt = <3000000>; > > + regulator-max-microvolt = <3000000>; > > + regulator-name = "avcc"; > > +}; > > + > > +®_usb1_vbus { > > + status = "okay"; > > +}; > > + > > +®_usb2_vbus { > > + status = "okay"; > > +}; > > + > > +&uart0 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&uart0_pins_a>; > > + status = "okay"; > > +}; > > + > > +&usbphy { > > + usb1_vbus-supply = <®_usb1_vbus>; > > + usb2_vbus-supply = <®_usb2_vbus>; > > + status = "okay"; > > +}; > > -- > > 2.0.5 > > > > It looks fine otherwise. Thanks! > Maxime > > -- > Maxime Ripard, Free Electrons > Embedded Linux, Kernel and Android engineering > http://free-electrons.com
On Wed, Mar 04, 2015 at 11:26:15PM +0300, Aleksei Mamlin wrote: > On Wed, 4 Mar 2015 21:18:19 +0100 > Maxime Ripard <maxime.ripard@free-electrons.com> wrote: > > > On Wed, Mar 04, 2015 at 11:15:47AM +0300, Aleksei Mamlin wrote: > > > This patch add support for Wexler TAB7200 tablet. > > > > > > The Wexler TAB7200 is a A20 based tablet with 7 inch display(800x480), > > > capacitive touchscreen(5 fingers), 1G RAM, 4G NAND, micro SD card slot, > > > mini HDMI port, 3.5mm audio plug, 1 USB OTG port and 1 USB 2.0 port. > > > > > > Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> > > > --- > > > .../devicetree/bindings/vendor-prefixes.txt | 1 + > > > arch/arm/boot/dts/Makefile | 3 +- > > > arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 185 +++++++++++++++++++++ > > > 3 files changed, 188 insertions(+), 1 deletion(-) > > > create mode 100644 arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts > > > > > > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt > > > index 389ca13..eb67da4 100644 > > > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt > > > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt > > > @@ -189,6 +189,7 @@ variscite Variscite Ltd. > > > via VIA Technologies, Inc. > > > virtio Virtual I/O Device Specification, developed by the OASIS consortium > > > voipac Voipac Technologies s.r.o. > > > +wexler AVIRSA Electronics > > > > Why a different name? > > WEXLER trademark owned by AVIRSA Electronics, a member of the diversified holding AVIRSA. It's not really an issue. There's a lot of different vendor owned by the same companies in that file. And the fact that you named it wexler in the first place proves that wexler is more known than avirsa. Maxime
On Thu, Mar 05, 2015 at 12:16:48AM +0300, Aleksei Mamlin wrote: > This patch add support for Wexler TAB7200 tablet. > > The Wexler TAB7200 is a A20 based tablet with 7 inch display(800x480), > capacitive touchscreen(5 fingers), 1G RAM, 4G NAND, micro SD card slot, > mini HDMI port, 3.5mm audio plug, 1 USB OTG port and 1 USB 2.0 port. > > Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> > --- > arch/arm/boot/dts/Makefile | 3 +- > arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 181 +++++++++++++++++++++++++ > 2 files changed, 183 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index beac15f..f6dc2ac 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -550,7 +550,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \ > sun7i-a20-olinuxino-lime2.dtb \ > sun7i-a20-olinuxino-micro.dtb \ > sun7i-a20-pcduino3.dtb \ > - sun7i-a20-pcduino3-nano.dtb > + sun7i-a20-pcduino3-nano.dtb \ > + sun7i-a20-wexler-tab7200.dtb > dtb-$(CONFIG_MACH_SUN8I) += \ > sun8i-a23-ippo-q8h-v5.dtb \ > sun8i-a23-ippo-q8h-v1.2.dtb > diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts > new file mode 100644 > index 0000000..b197d57 > --- /dev/null > +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts > @@ -0,0 +1,181 @@ > +/* > + * Copyright 2015 Aleksei Mamlin > + * Aleksei Mamlin <mamlinav@gmail.com> > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License, or (at your option) any later version. > + * > + * This file is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public > + * License along with this file; if not, write to the Free > + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, > + * MA 02110-1301 USA > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +/dts-v1/; > +#include "sun7i-a20.dtsi" > +#include "sunxi-common-regulators.dtsi" > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/interrupt-controller/irq.h> > +#include <dt-bindings/pinctrl/sun4i-a10.h> You don't seem to be using the pinctrl header. Also, next time, please mention the version and provide a changelog for your patches. Thanks! Maxime
On Sun, Mar 08, 2015 at 02:57:33PM +0300, Aleksei Mamlin wrote: > This patch add support for Wexler TAB7200 tablet. > > The Wexler TAB7200 is a A20 based tablet with 7 inch display(800x480), > capacitive touchscreen(5 fingers), 1G RAM, 4G NAND, micro SD card slot, > mini HDMI port, 3.5mm audio plug, 1 USB OTG port and 1 USB 2.0 port. > > Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> > --- > Changes since v1: > * Split to two patches: > The first one adds dts file for Wexler TAB7200. > The second one adds vendor-prefix for Wexler. > * Remove include dt-bindings/pinctrl/sun4i-a10.h because we don't use > the pinctrl header. Applied the two patches, thanks! Maxime
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 389ca13..eb67da4 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -189,6 +189,7 @@ variscite Variscite Ltd. via VIA Technologies, Inc. virtio Virtual I/O Device Specification, developed by the OASIS consortium voipac Voipac Technologies s.r.o. +wexler AVIRSA Electronics winbond Winbond Electronics corp. wlf Wolfson Microelectronics wm Wondermedia Technologies, Inc. diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index beac15f..f6dc2ac 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -550,7 +550,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-olinuxino-lime2.dtb \ sun7i-a20-olinuxino-micro.dtb \ sun7i-a20-pcduino3.dtb \ - sun7i-a20-pcduino3-nano.dtb + sun7i-a20-pcduino3-nano.dtb \ + sun7i-a20-wexler-tab7200.dtb dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a23-ippo-q8h-v5.dtb \ sun8i-a23-ippo-q8h-v1.2.dtb diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts new file mode 100644 index 0000000..d50f40b --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts @@ -0,0 +1,185 @@ +/* + * Copyright 2015 Aleksei Mamlin + * Aleksei Mamlin <mamlinav@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Wexler TAB7200"; + compatible = "wexler,tab7200", "allwinner,sun7i-a20"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@571 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <571428>; + }; + + button@761 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <761904>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +};
This patch add support for Wexler TAB7200 tablet. The Wexler TAB7200 is a A20 based tablet with 7 inch display(800x480), capacitive touchscreen(5 fingers), 1G RAM, 4G NAND, micro SD card slot, mini HDMI port, 3.5mm audio plug, 1 USB OTG port and 1 USB 2.0 port. Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> --- .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 185 +++++++++++++++++++++ 3 files changed, 188 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts