Message ID | 20081013151537.19033.25006.stgit@ubuntu8041.localdomain (mailing list archive) |
---|---|
State | Accepted, archived |
Commit | 6675847ea42d5acfaa644ac24eb0d87df5769cd5 |
Delegated to: | Kumar Gala |
Headers | show |
On Oct 13, 2008, at 10:16 AM, Martyn Welch wrote: > Support for the SBC610 VPX Single Board Computer from GE Fanuc > (PowerPC > MPC8641D). > > This patch adds support for the registers held in the devices main > FPGA, > exposing extra information about the revision of the board through > cpuinfo. > > Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> > --- > > Stephen: Thanks for spotting that error. > > New to rev 3: > * Added of_node_put() > > arch/powerpc/boot/dts/gef_sbc610.dts | 4 +++ > arch/powerpc/platforms/86xx/gef_sbc610.c | 40 +++++++++++++++++++++ > +++++++++ > 2 files changed, 44 insertions(+), 0 deletions(-) applied. - k
On Mon, 13 Oct 2008 16:16:45 +0100 Martyn Welch <martyn.welch@gefanuc.com> wrote: > > Support for the SBC610 VPX Single Board Computer from GE Fanuc (PowerPC > MPC8641D). > > This patch adds support for the registers held in the devices main FPGA, > exposing extra information about the revision of the board through cpuinfo. > > Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> > --- > > Stephen: Thanks for spotting that error. > > New to rev 3: > * Added of_node_put() Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> for of accessing
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts index 771a776..6ed6083 100644 --- a/arch/powerpc/boot/dts/gef_sbc610.dts +++ b/arch/powerpc/boot/dts/gef_sbc610.dts @@ -84,6 +84,10 @@ 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit) 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit) + fpga@4,0 { + compatible = "gef,fpga-regs"; + reg = <0x4 0x0 0x40>; + }; gef_pic: pic@4,4000 { #interrupt-cells = <1>; interrupt-controller; diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c index 3873c20..821c45f 100644 --- a/arch/powerpc/platforms/86xx/gef_sbc610.c +++ b/arch/powerpc/platforms/86xx/gef_sbc610.c @@ -73,6 +73,7 @@ static void __init gef_sbc610_init_irq(void) static void __init gef_sbc610_setup_arch(void) { + struct device_node *regs; #ifdef CONFIG_PCI struct device_node *np; @@ -86,8 +87,43 @@ static void __init gef_sbc610_setup_arch(void) #ifdef CONFIG_SMP mpc86xx_smp_init(); #endif + + /* Remap basic board registers */ + regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs"); + if (regs) { + sbc610_regs = of_iomap(regs, 0); + if (sbc610_regs == NULL) + printk(KERN_WARNING "Unable to map board registers\n"); + of_node_put(regs); + } +} + +/* Return the PCB revision */ +static unsigned int gef_sbc610_get_pcb_rev(void) +{ + unsigned int reg; + + reg = ioread32(sbc610_regs); + return (reg >> 8) & 0xff; +} + +/* Return the board (software) revision */ +static unsigned int gef_sbc610_get_board_rev(void) +{ + unsigned int reg; + + reg = ioread32(sbc610_regs); + return (reg >> 16) & 0xff; } +/* Return the FPGA revision */ +static unsigned int gef_sbc610_get_fpga_rev(void) +{ + unsigned int reg; + + reg = ioread32(sbc610_regs); + return (reg >> 24) & 0xf; +} static void gef_sbc610_show_cpuinfo(struct seq_file *m) { @@ -96,6 +132,10 @@ static void gef_sbc610_show_cpuinfo(struct seq_file *m) seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n"); + seq_printf(m, "Revision\t: %u%c\n", gef_sbc610_get_pcb_rev(), + ('A' + gef_sbc610_get_board_rev() - 1)); + seq_printf(m, "FPGA Revision\t: %u\n", gef_sbc610_get_fpga_rev()); + seq_printf(m, "SVR\t\t: 0x%x\n", svid); seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); }
Support for the SBC610 VPX Single Board Computer from GE Fanuc (PowerPC MPC8641D). This patch adds support for the registers held in the devices main FPGA, exposing extra information about the revision of the board through cpuinfo. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> --- Stephen: Thanks for spotting that error. New to rev 3: * Added of_node_put() arch/powerpc/boot/dts/gef_sbc610.dts | 4 +++ arch/powerpc/platforms/86xx/gef_sbc610.c | 40 ++++++++++++++++++++++++++++++ 2 files changed, 44 insertions(+), 0 deletions(-)