Message ID | 20091125170307.5446.12439.sendpatchset@localhost |
---|---|
State | Not Applicable |
Delegated to: | David Miller |
Headers | show |
Hello. Bartlomiej Zolnierkiewicz wrote: > It has been dead for the last three years (== since the initial driver > merge) and probability that it will ever get fixed is quite low. > Since there is no reason to keep this dead code around any longer just > remove it (it can still be retrieved from the git history if necessary). > Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> > --- > drivers/ata/pata_artop.c | 29 ++++++++--------------------- > 1 file changed, 8 insertions(+), 21 deletions(-) > Index: b/drivers/ata/pata_artop.c > =================================================================== > --- a/drivers/ata/pata_artop.c > +++ b/drivers/ata/pata_artop.c > @@ -30,15 +30,6 @@ > #define DRV_NAME "pata_artop" > #define DRV_VERSION "0.4.5" > > -/* > - * The ARTOP has 33 Mhz and "over clocked" timing tables. Until we > - * get PCI bus speed functionality we leave this as 0. Its a variable > - * for when we get the functionality and also for folks wanting to > - * test stuff. > - */ > - > -static int clock = 0; > - > /** > * atp8xx_prereset - probe begin > * @link: link [...] > @@ -223,7 +210,7 @@ static void atp850_set_dmamode(struct at > > /* Add ultra DMA bits if in UDMA mode */ > if (adev->dma_mode >= XFER_UDMA_0) { > - u8 mode = (adev->dma_mode - XFER_UDMA_0) + 1 - clock; > + u8 mode = (adev->dma_mode - XFER_UDMA_0) + 1; > if (mode == 0) > mode = 1; Note that 'mode' can't be 0 anymore, so this check can be removed. > ultra |= (mode << (2 * dn)); > @@ -261,7 +248,7 @@ static void atp86x_set_dmamode(struct at > pci_read_config_byte(pdev, 0x44 + ap->port_no, &ultra); > ultra &= ~(7 << (4 * adev->devno)); /* One nibble per drive */ > if (adev->dma_mode >= XFER_UDMA_0) { > - u8 mode = adev->dma_mode - XFER_UDMA_0 + 1 - clock; > + u8 mode = adev->dma_mode - XFER_UDMA_0 + 1; > if (mode == 0) > mode = 1; Same here... MBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Index: b/drivers/ata/pata_artop.c =================================================================== --- a/drivers/ata/pata_artop.c +++ b/drivers/ata/pata_artop.c @@ -30,15 +30,6 @@ #define DRV_NAME "pata_artop" #define DRV_VERSION "0.4.5" -/* - * The ARTOP has 33 Mhz and "over clocked" timing tables. Until we - * get PCI bus speed functionality we leave this as 0. Its a variable - * for when we get the functionality and also for folks wanting to - * test stuff. - */ - -static int clock = 0; - /** * atp8xx_prereset - probe begin * @link: link @@ -101,13 +92,11 @@ static void atp850_load_piomode(struct a { struct pci_dev *pdev = to_pci_dev(ap->host->dev); int dn = adev->devno + 2 * ap->port_no; - const u16 timing[2][5] = { - { 0x0000, 0x000A, 0x0008, 0x0303, 0x0301 }, - { 0x0700, 0x070A, 0x0708, 0x0403, 0x0401 } + const u16 timing[5] = + { 0x0000, 0x000A, 0x0008, 0x0303, 0x0301 }; - }; /* Load the PIO timing active/recovery bits */ - pci_write_config_word(pdev, 0x40 + 2 * dn, timing[clock][pio]); + pci_write_config_word(pdev, 0x40 + 2 * dn, timing[pio]); } /** @@ -156,13 +145,11 @@ static void atp86x_load_piomode(struct a { struct pci_dev *pdev = to_pci_dev(ap->host->dev); int dn = adev->devno + 2 * ap->port_no; - const u8 timing[2][5] = { - { 0x00, 0x0A, 0x08, 0x33, 0x31 }, - { 0x70, 0x7A, 0x78, 0x43, 0x41 } + const u8 timing[5] = + { 0x00, 0x0A, 0x08, 0x33, 0x31 }; - }; /* Load the PIO timing active/recovery bits */ - pci_write_config_byte(pdev, 0x40 + dn, timing[clock][pio]); + pci_write_config_byte(pdev, 0x40 + dn, timing[pio]); } /** @@ -223,7 +210,7 @@ static void atp850_set_dmamode(struct at /* Add ultra DMA bits if in UDMA mode */ if (adev->dma_mode >= XFER_UDMA_0) { - u8 mode = (adev->dma_mode - XFER_UDMA_0) + 1 - clock; + u8 mode = (adev->dma_mode - XFER_UDMA_0) + 1; if (mode == 0) mode = 1; ultra |= (mode << (2 * dn)); @@ -261,7 +248,7 @@ static void atp86x_set_dmamode(struct at pci_read_config_byte(pdev, 0x44 + ap->port_no, &ultra); ultra &= ~(7 << (4 * adev->devno)); /* One nibble per drive */ if (adev->dma_mode >= XFER_UDMA_0) { - u8 mode = adev->dma_mode - XFER_UDMA_0 + 1 - clock; + u8 mode = adev->dma_mode - XFER_UDMA_0 + 1; if (mode == 0) mode = 1; ultra |= (mode << (4 * adev->devno));