[v2,3/4] mfd: dln2: add start/stop RX URBs helpers

This is in preparation for adding suspend / resume support.

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
---
 drivers/mfd/dln2.c | 51 +++++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 41 insertions(+), 10 deletions(-)

On Tue, Dec 16, 2014 at 05:57:14PM +0200, Octavian Purdila wrote:
> This is in preparation for adding suspend / resume support.
> 
> Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
> ---
>  drivers/mfd/dln2.c | 51 +++++++++++++++++++++++++++++++++++++++++----------
>  1 file changed, 41 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/mfd/dln2.c b/drivers/mfd/dln2.c
> index 6d49685..75358d2 100644
> --- a/drivers/mfd/dln2.c
> +++ b/drivers/mfd/dln2.c
> @@ -587,12 +587,19 @@ static void dln2_free_rx_urbs(struct dln2_dev *dln2)
>  	int i;
>  
>  	for (i = 0; i < DLN2_MAX_URBS; i++) {
> -		usb_kill_urb(dln2->rx_urb[i]);
>  		usb_free_urb(dln2->rx_urb[i]);
>  		kfree(dln2->rx_buf[i]);
>  	}
>  }
>  
> +static void dln2_stop_rx_urbs(struct dln2_dev *dln2)
> +{
> +	int i;
> +
> +	for (i = 0; i < DLN2_MAX_URBS; i++)
> +		usb_kill_urb(dln2->rx_urb[i]);
> +}
> +
>  static void dln2_free(struct dln2_dev *dln2)
>  {
>  	dln2_free_rx_urbs(dln2);
> @@ -604,9 +611,7 @@ static int dln2_setup_rx_urbs(struct dln2_dev *dln2,
>  			      struct usb_host_interface *hostif)
>  {
>  	int i;
> -	int ret;
>  	const int rx_max_size = DLN2_RX_BUF_SIZE;
> -	struct device *dev = &dln2->interface->dev;
>  
>  	for (i = 0; i < DLN2_MAX_URBS; i++) {
>  		dln2->rx_buf[i] = kmalloc(rx_max_size, GFP_KERNEL);
> @@ -621,7 +626,19 @@ static int dln2_setup_rx_urbs(struct dln2_dev *dln2,
>  				  usb_rcvbulkpipe(dln2->usb_dev, dln2->ep_in),
>  				  dln2->rx_buf[i], rx_max_size, dln2_rx, dln2);
>  

You should remove this stray newline as well. 

> -		ret = usb_submit_urb(dln2->rx_urb[i], GFP_KERNEL);
> +	}
> +
> +	return 0;
> +}

Otherwise,

Reviewed-by: Johan Hovold <johan@kernel.org>

Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

On Tue, 16 Dec 2014, Octavian Purdila wrote:

> This is in preparation for adding suspend / resume support.

Please re-submit this set with the Acks you have received.

Also draft a cover-letter with the current status of set, what you
need next etc.

> Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
> ---
>  drivers/mfd/dln2.c | 51 +++++++++++++++++++++++++++++++++++++++++----------
>  1 file changed, 41 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/mfd/dln2.c b/drivers/mfd/dln2.c
> index 6d49685..75358d2 100644
> --- a/drivers/mfd/dln2.c
> +++ b/drivers/mfd/dln2.c
> @@ -587,12 +587,19 @@ static void dln2_free_rx_urbs(struct dln2_dev *dln2)
>  	int i;
>  
>  	for (i = 0; i < DLN2_MAX_URBS; i++) {
> -		usb_kill_urb(dln2->rx_urb[i]);
>  		usb_free_urb(dln2->rx_urb[i]);
>  		kfree(dln2->rx_buf[i]);
>  	}
>  }
>  
> +static void dln2_stop_rx_urbs(struct dln2_dev *dln2)
> +{
> +	int i;
> +
> +	for (i = 0; i < DLN2_MAX_URBS; i++)
> +		usb_kill_urb(dln2->rx_urb[i]);
> +}
> +
>  static void dln2_free(struct dln2_dev *dln2)
>  {
>  	dln2_free_rx_urbs(dln2);
> @@ -604,9 +611,7 @@ static int dln2_setup_rx_urbs(struct dln2_dev *dln2,
>  			      struct usb_host_interface *hostif)
>  {
>  	int i;
> -	int ret;
>  	const int rx_max_size = DLN2_RX_BUF_SIZE;
> -	struct device *dev = &dln2->interface->dev;
>  
>  	for (i = 0; i < DLN2_MAX_URBS; i++) {
>  		dln2->rx_buf[i] = kmalloc(rx_max_size, GFP_KERNEL);
> @@ -621,7 +626,19 @@ static int dln2_setup_rx_urbs(struct dln2_dev *dln2,
>  				  usb_rcvbulkpipe(dln2->usb_dev, dln2->ep_in),
>  				  dln2->rx_buf[i], rx_max_size, dln2_rx, dln2);
>  
> -		ret = usb_submit_urb(dln2->rx_urb[i], GFP_KERNEL);
> +	}
> +
> +	return 0;
> +}
> +
> +static int dln2_start_rx_urbs(struct dln2_dev *dln2, gfp_t gfp)
> +{
> +	struct device *dev = &dln2->interface->dev;
> +	int ret;
> +	int i;
> +
> +	for (i = 0; i < DLN2_MAX_URBS; i++) {
> +		ret = usb_submit_urb(dln2->rx_urb[i], gfp);
>  		if (ret < 0) {
>  			dev_err(dev, "failed to submit RX URB: %d\n", ret);
>  			return ret;
> @@ -665,9 +682,8 @@ static const struct mfd_cell dln2_devs[] = {
>  	},
>  };
>  
> -static void dln2_disconnect(struct usb_interface *interface)
> +static void dln2_stop(struct dln2_dev *dln2)
>  {
> -	struct dln2_dev *dln2 = usb_get_intfdata(interface);
>  	int i, j;
>  
>  	/* don't allow starting new transfers */
> @@ -696,6 +712,14 @@ static void dln2_disconnect(struct usb_interface *interface)
>  	/* wait for transfers to end */
>  	wait_event(dln2->disconnect_wq, !dln2->active_transfers);
>  
> +	dln2_stop_rx_urbs(dln2);
> +}
> +static void dln2_disconnect(struct usb_interface *interface)
> +{
> +	struct dln2_dev *dln2 = usb_get_intfdata(interface);
> +
> +	dln2_stop(dln2);
> +
>  	mfd_remove_devices(&interface->dev);
>  
>  	dln2_free(dln2);
> @@ -738,23 +762,30 @@ static int dln2_probe(struct usb_interface *interface,
>  
>  	ret = dln2_setup_rx_urbs(dln2, hostif);
>  	if (ret)
> -		goto out_cleanup;
> +		goto out_free;
> +
> +	ret = dln2_start_rx_urbs(dln2, GFP_KERNEL);
> +	if (ret)
> +		goto out_stop_rx;
>  
>  	ret = dln2_hw_init(dln2);
>  	if (ret < 0) {
>  		dev_err(dev, "failed to initialize hardware\n");
> -		goto out_cleanup;
> +		goto out_stop_rx;
>  	}
>  
>  	ret = mfd_add_hotplug_devices(dev, dln2_devs, ARRAY_SIZE(dln2_devs));
>  	if (ret != 0) {
>  		dev_err(dev, "failed to add mfd devices to core\n");
> -		goto out_cleanup;
> +		goto out_stop_rx;
>  	}
>  
>  	return 0;
>  
> -out_cleanup:
> +out_stop_rx:
> +	dln2_stop_rx_urbs(dln2);
> +
> +out_free:
>  	dln2_free(dln2);
>  
>  	return ret;