Message ID | 1405441856-6263-1-git-send-email-hadrien.boutteville@gmail.com |
---|---|
State | Accepted |
Commit | dfdf173a4c7ca1c8584833a7286df37cb008fdb2 |
Headers | show |
On Tue, 15 Jul 2014 18:30:56 +0200 Hadrien Boutteville <hadrien.boutteville@gmail.com> wrote: > There are two possible configurations for Qt4 installation: standard > (with X11) and embedded (for framebuffer). Both configurations cannot be > used together for one installation and some options are specific to one > configuration or the other. > > Add a choice to select the standard or the embedded installation to add > X11 support. > > The integration is done in order to make maximum use of the current > configuration logic, for example by using the same mkspecs files. > > Signed-off-by: Hadrien Boutteville <hadrien.boutteville@gmail.com> > Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > Cc: "Yann E. MORIN" <yann.morin.1998@free.fr> Hi, Works on ARM (Armadeus APF51). Tested-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com> > --- > > For now I only tested under Qemu without all modules (successfully). > I will do more tests on an ARM target, but feel free to test on your > side ;-). > > --- > package/qt/Config.in | 46 ++++++++++++++++++++++++++++++++++++++++++++++ > package/qt/qt.mk | 15 +++++++++++++++ > 2 files changed, 61 insertions(+) > > diff --git a/package/qt/Config.in b/package/qt/Config.in > index 0a21e93..abab229 100644 > --- a/package/qt/Config.in > +++ b/package/qt/Config.in > @@ -17,6 +17,40 @@ menuconfig BR2_PACKAGE_QT > > if BR2_PACKAGE_QT > > +choice > + prompt "Qt installation" > + help > + Selects the type of installation: standard or embedded > + > +config BR2_PACKAGE_QT_EMBEDDED > + bool "Qt embedded" > + help > + The embedded Qt installation targets embedded systems without X.org. > + Provides backends for framebuffer. > + If unsure, say Y. > + > +comment "Qt standard (X11) not available (need X.org)" > + depends on !BR2_PACKAGE_XORG7 > + > +config BR2_PACKAGE_QT_X11 > + bool "Qt standard (X11)" > + depends on BR2_PACKAGE_XORG7 > + select BR2_PACKAGE_FONTCONFIG > + select BR2_PACKAGE_XLIB_LIBXI > + select BR2_PACKAGE_XLIB_LIBX11 > + select BR2_PACKAGE_XLIB_LIBXRENDER > + select BR2_PACKAGE_XLIB_LIBXCURSOR > + select BR2_PACKAGE_XLIB_LIBXRANDR > + select BR2_PACKAGE_XLIB_LIBXEXT > + select BR2_PACKAGE_XLIB_LIBXV > + select BR2_PACKAGE_QT_SYSTEMFREETYPE > + select BR2_PACKAGE_QT_GUI_MODULE > + help > + The standard Qt installation provides X.org backend. If you don't want to > + use X.org, say N. > + > +endchoice > + > config BR2_PACKAGE_QT_DEBUG > bool "Compile with debug support" > help > @@ -98,6 +132,9 @@ config BR2_PACKAGE_QT_GUI_MODULE > video output, or you don't require Qt GUI, say n. > > if BR2_PACKAGE_QT_GUI_MODULE > + > +if BR2_PACKAGE_QT_EMBEDDED > + > menu "Pixel depths" > comment "Deselecting each option leads to Qt's default (8,16,32)" > > @@ -155,6 +192,8 @@ config BR2_PACKAGE_QT_FONT_UNIFONT > > endmenu > > +endif # BR2_PACKAGE_QT_EMBEDDED > + > choice > prompt "freetype2 support" > default BR2_PACKAGE_QT_NOFREETYPE > @@ -163,11 +202,16 @@ choice > > config BR2_PACKAGE_QT_NOFREETYPE > bool "no freetype2 support" > + depends on BR2_PACKAGE_QT_EMBEDDED > help > Do not compile in Freetype2 support. > > +comment "Qt freetype2 needs Qt embedded" > + depends on BR2_PACKAGE_QT_X11 > + > config BR2_PACKAGE_QT_QTFREETYPE > bool "Qt freetype2" > + depends on BR2_PACKAGE_QT_EMBEDDED > help > Use the libfreetype bundled with Qt. > > @@ -268,9 +312,11 @@ endchoice > > source "package/qt/Config.sql.in" > if BR2_PACKAGE_QT_GUI_MODULE > +if BR2_PACKAGE_QT_EMBEDDED > source "package/qt/Config.gfx.in" > source "package/qt/Config.mouse.in" > source "package/qt/Config.keyboard.in" > +endif > > config BR2_PACKAGE_QT_PHONON > bool "Phonon Module" > diff --git a/package/qt/qt.mk b/package/qt/qt.mk > index 6d01023..0513416 100644 > --- a/package/qt/qt.mk > +++ b/package/qt/qt.mk > @@ -236,7 +236,20 @@ else > QT_EMB_PLATFORM = generic > endif > > +ifeq ($(BR2_PACKAGE_QT_X11),y) > +QT_DEPENDENCIES += fontconfig xlib_libXi xlib_libX11 xlib_libXrender \ > + xlib_libXcursor xlib_libXrandr xlib_libXext xlib_libXv > +# Using pkg-config avoids us some logic to redefine and sed again mkspecs files > +# to add X11 include path and link options > +QT_CFLAGS += $(shell $(PKG_CONFIG_HOST_BINARY) --cflags x11) > +QT_CXXFLAGS += $(shell $(PKG_CONFIG_HOST_BINARY) --cflags x11) > +QT_LDFLAGS += $(shell $(PKG_CONFIG_HOST_BINARY) --libs x11 xext) > +QT_CONFIGURE_OPTS += -arch $(QT_EMB_PLATFORM) \ > + -xplatform qws/linux-$(QT_EMB_PLATFORM)-g++ -x11 -no-gtkstyle -no-sm \ > + -no-openvg > +else # if BR2_PACKAGE_QT_EMBEDDED > QT_CONFIGURE_OPTS += -embedded $(QT_EMB_PLATFORM) > +endif > > ifneq ($(BR2_PACKAGE_QT_GUI_MODULE),y) > QT_CONFIGURE_OPTS += -no-gui > @@ -652,6 +665,7 @@ define QT_INSTALL_TARGET_IMPORTS > endef > > # Fonts installation > +ifeq ($(BR2_PACKAGE_QT_EMBEDDED),y) > ifneq ($(QT_FONTS),) > define QT_INSTALL_TARGET_FONTS > mkdir -p $(TARGET_DIR)/usr/lib/fonts > @@ -665,6 +679,7 @@ define QT_INSTALL_TARGET_FONTS_TTF > cp -dpf $(STAGING_DIR)/usr/lib/fonts/*.ttf $(TARGET_DIR)/usr/lib/fonts > endef > endif > +endif # BR2_PACKAGE_QT_EMBEDDED > > ifeq ($(BR2_PACKAGE_QT_GFX_POWERVR),y) > define QT_INSTALL_TARGET_POWERVR > -- > 2.0.1 > > _______________________________________________ > buildroot mailing list > buildroot@busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot
On Tue, 15 Jul 2014 18:30:56 +0200 Hadrien Boutteville <hadrien.boutteville@gmail.com> wrote: > There are two possible configurations for Qt4 installation: standard > (with X11) and embedded (for framebuffer). Both configurations cannot be > used together for one installation and some options are specific to one > configuration or the other. > > Add a choice to select the standard or the embedded installation to add > X11 support. > > The integration is done in order to make maximum use of the current > configuration logic, for example by using the same mkspecs files. > > Signed-off-by: Hadrien Boutteville <hadrien.boutteville@gmail.com> > Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > Cc: "Yann E. MORIN" <yann.morin.1998@free.fr> Hi, Works on ARM (Armadeus APF51). Tested-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com> > --- > > For now I only tested under Qemu without all modules (successfully). > I will do more tests on an ARM target, but feel free to test on your > side ;-). > > --- > package/qt/Config.in | 46 ++++++++++++++++++++++++++++++++++++++++++++++ > package/qt/qt.mk | 15 +++++++++++++++ > 2 files changed, 61 insertions(+) > > diff --git a/package/qt/Config.in b/package/qt/Config.in > index 0a21e93..abab229 100644 > --- a/package/qt/Config.in > +++ b/package/qt/Config.in > @@ -17,6 +17,40 @@ menuconfig BR2_PACKAGE_QT > > if BR2_PACKAGE_QT > > +choice > + prompt "Qt installation" > + help > + Selects the type of installation: standard or embedded > + > +config BR2_PACKAGE_QT_EMBEDDED > + bool "Qt embedded" > + help > + The embedded Qt installation targets embedded systems without X.org. > + Provides backends for framebuffer. > + If unsure, say Y. > + > +comment "Qt standard (X11) not available (need X.org)" > + depends on !BR2_PACKAGE_XORG7 > + > +config BR2_PACKAGE_QT_X11 > + bool "Qt standard (X11)" > + depends on BR2_PACKAGE_XORG7 > + select BR2_PACKAGE_FONTCONFIG > + select BR2_PACKAGE_XLIB_LIBXI > + select BR2_PACKAGE_XLIB_LIBX11 > + select BR2_PACKAGE_XLIB_LIBXRENDER > + select BR2_PACKAGE_XLIB_LIBXCURSOR > + select BR2_PACKAGE_XLIB_LIBXRANDR > + select BR2_PACKAGE_XLIB_LIBXEXT > + select BR2_PACKAGE_XLIB_LIBXV > + select BR2_PACKAGE_QT_SYSTEMFREETYPE > + select BR2_PACKAGE_QT_GUI_MODULE > + help > + The standard Qt installation provides X.org backend. If you don't want to > + use X.org, say N. > + > +endchoice > + > config BR2_PACKAGE_QT_DEBUG > bool "Compile with debug support" > help > @@ -98,6 +132,9 @@ config BR2_PACKAGE_QT_GUI_MODULE > video output, or you don't require Qt GUI, say n. > > if BR2_PACKAGE_QT_GUI_MODULE > + > +if BR2_PACKAGE_QT_EMBEDDED > + > menu "Pixel depths" > comment "Deselecting each option leads to Qt's default (8,16,32)" > > @@ -155,6 +192,8 @@ config BR2_PACKAGE_QT_FONT_UNIFONT > > endmenu > > +endif # BR2_PACKAGE_QT_EMBEDDED > + > choice > prompt "freetype2 support" > default BR2_PACKAGE_QT_NOFREETYPE > @@ -163,11 +202,16 @@ choice > > config BR2_PACKAGE_QT_NOFREETYPE > bool "no freetype2 support" > + depends on BR2_PACKAGE_QT_EMBEDDED > help > Do not compile in Freetype2 support. > > +comment "Qt freetype2 needs Qt embedded" > + depends on BR2_PACKAGE_QT_X11 > + > config BR2_PACKAGE_QT_QTFREETYPE > bool "Qt freetype2" > + depends on BR2_PACKAGE_QT_EMBEDDED > help > Use the libfreetype bundled with Qt. > > @@ -268,9 +312,11 @@ endchoice > > source "package/qt/Config.sql.in" > if BR2_PACKAGE_QT_GUI_MODULE > +if BR2_PACKAGE_QT_EMBEDDED > source "package/qt/Config.gfx.in" > source "package/qt/Config.mouse.in" > source "package/qt/Config.keyboard.in" > +endif > > config BR2_PACKAGE_QT_PHONON > bool "Phonon Module" > diff --git a/package/qt/qt.mk b/package/qt/qt.mk > index 6d01023..0513416 100644 > --- a/package/qt/qt.mk > +++ b/package/qt/qt.mk > @@ -236,7 +236,20 @@ else > QT_EMB_PLATFORM = generic > endif > > +ifeq ($(BR2_PACKAGE_QT_X11),y) > +QT_DEPENDENCIES += fontconfig xlib_libXi xlib_libX11 xlib_libXrender \ > + xlib_libXcursor xlib_libXrandr xlib_libXext xlib_libXv > +# Using pkg-config avoids us some logic to redefine and sed again mkspecs files > +# to add X11 include path and link options > +QT_CFLAGS += $(shell $(PKG_CONFIG_HOST_BINARY) --cflags x11) > +QT_CXXFLAGS += $(shell $(PKG_CONFIG_HOST_BINARY) --cflags x11) > +QT_LDFLAGS += $(shell $(PKG_CONFIG_HOST_BINARY) --libs x11 xext) > +QT_CONFIGURE_OPTS += -arch $(QT_EMB_PLATFORM) \ > + -xplatform qws/linux-$(QT_EMB_PLATFORM)-g++ -x11 -no-gtkstyle -no-sm \ > + -no-openvg > +else # if BR2_PACKAGE_QT_EMBEDDED > QT_CONFIGURE_OPTS += -embedded $(QT_EMB_PLATFORM) > +endif > > ifneq ($(BR2_PACKAGE_QT_GUI_MODULE),y) > QT_CONFIGURE_OPTS += -no-gui > @@ -652,6 +665,7 @@ define QT_INSTALL_TARGET_IMPORTS > endef > > # Fonts installation > +ifeq ($(BR2_PACKAGE_QT_EMBEDDED),y) > ifneq ($(QT_FONTS),) > define QT_INSTALL_TARGET_FONTS > mkdir -p $(TARGET_DIR)/usr/lib/fonts > @@ -665,6 +679,7 @@ define QT_INSTALL_TARGET_FONTS_TTF > cp -dpf $(STAGING_DIR)/usr/lib/fonts/*.ttf $(TARGET_DIR)/usr/lib/fonts > endef > endif > +endif # BR2_PACKAGE_QT_EMBEDDED > > ifeq ($(BR2_PACKAGE_QT_GFX_POWERVR),y) > define QT_INSTALL_TARGET_POWERVR > -- > 2.0.1 > > _______________________________________________ > buildroot mailing list > buildroot@busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot
up On Tue, 16 Dec 2014 10:44:29 +0100 "gwenhael.goavec" <gwenj@trabucayre.com> wrote: > On Tue, 15 Jul 2014 18:30:56 +0200 > Hadrien Boutteville <hadrien.boutteville@gmail.com> wrote: > > > There are two possible configurations for Qt4 installation: standard > > (with X11) and embedded (for framebuffer). Both configurations cannot be > > used together for one installation and some options are specific to one > > configuration or the other. > > > > Add a choice to select the standard or the embedded installation to add > > X11 support. > > > > The integration is done in order to make maximum use of the current > > configuration logic, for example by using the same mkspecs files. > > > > Signed-off-by: Hadrien Boutteville <hadrien.boutteville@gmail.com> > > Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > > Cc: "Yann E. MORIN" <yann.morin.1998@free.fr> > > Hi, > Works on ARM (Armadeus APF51). > Tested-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com> > > --- > > > > For now I only tested under Qemu without all modules (successfully). > > I will do more tests on an ARM target, but feel free to test on your > > side ;-). > > > > --- > > package/qt/Config.in | 46 ++++++++++++++++++++++++++++++++++++++++++++++ > > package/qt/qt.mk | 15 +++++++++++++++ > > 2 files changed, 61 insertions(+) > > > > diff --git a/package/qt/Config.in b/package/qt/Config.in > > index 0a21e93..abab229 100644 > > --- a/package/qt/Config.in > > +++ b/package/qt/Config.in > > @@ -17,6 +17,40 @@ menuconfig BR2_PACKAGE_QT > > > > if BR2_PACKAGE_QT > > > > +choice > > + prompt "Qt installation" > > + help > > + Selects the type of installation: standard or embedded > > + > > +config BR2_PACKAGE_QT_EMBEDDED > > + bool "Qt embedded" > > + help > > + The embedded Qt installation targets embedded systems without X.org. > > + Provides backends for framebuffer. > > + If unsure, say Y. > > + > > +comment "Qt standard (X11) not available (need X.org)" > > + depends on !BR2_PACKAGE_XORG7 > > + > > +config BR2_PACKAGE_QT_X11 > > + bool "Qt standard (X11)" > > + depends on BR2_PACKAGE_XORG7 > > + select BR2_PACKAGE_FONTCONFIG > > + select BR2_PACKAGE_XLIB_LIBXI > > + select BR2_PACKAGE_XLIB_LIBX11 > > + select BR2_PACKAGE_XLIB_LIBXRENDER > > + select BR2_PACKAGE_XLIB_LIBXCURSOR > > + select BR2_PACKAGE_XLIB_LIBXRANDR > > + select BR2_PACKAGE_XLIB_LIBXEXT > > + select BR2_PACKAGE_XLIB_LIBXV > > + select BR2_PACKAGE_QT_SYSTEMFREETYPE > > + select BR2_PACKAGE_QT_GUI_MODULE > > + help > > + The standard Qt installation provides X.org backend. If you don't want to > > + use X.org, say N. > > + > > +endchoice > > + > > config BR2_PACKAGE_QT_DEBUG > > bool "Compile with debug support" > > help > > @@ -98,6 +132,9 @@ config BR2_PACKAGE_QT_GUI_MODULE > > video output, or you don't require Qt GUI, say n. > > > > if BR2_PACKAGE_QT_GUI_MODULE > > + > > +if BR2_PACKAGE_QT_EMBEDDED > > + > > menu "Pixel depths" > > comment "Deselecting each option leads to Qt's default (8,16,32)" > > > > @@ -155,6 +192,8 @@ config BR2_PACKAGE_QT_FONT_UNIFONT > > > > endmenu > > > > +endif # BR2_PACKAGE_QT_EMBEDDED > > + > > choice > > prompt "freetype2 support" > > default BR2_PACKAGE_QT_NOFREETYPE > > @@ -163,11 +202,16 @@ choice > > > > config BR2_PACKAGE_QT_NOFREETYPE > > bool "no freetype2 support" > > + depends on BR2_PACKAGE_QT_EMBEDDED > > help > > Do not compile in Freetype2 support. > > > > +comment "Qt freetype2 needs Qt embedded" > > + depends on BR2_PACKAGE_QT_X11 > > + > > config BR2_PACKAGE_QT_QTFREETYPE > > bool "Qt freetype2" > > + depends on BR2_PACKAGE_QT_EMBEDDED > > help > > Use the libfreetype bundled with Qt. > > > > @@ -268,9 +312,11 @@ endchoice > > > > source "package/qt/Config.sql.in" > > if BR2_PACKAGE_QT_GUI_MODULE > > +if BR2_PACKAGE_QT_EMBEDDED > > source "package/qt/Config.gfx.in" > > source "package/qt/Config.mouse.in" > > source "package/qt/Config.keyboard.in" > > +endif > > > > config BR2_PACKAGE_QT_PHONON > > bool "Phonon Module" > > diff --git a/package/qt/qt.mk b/package/qt/qt.mk > > index 6d01023..0513416 100644 > > --- a/package/qt/qt.mk > > +++ b/package/qt/qt.mk > > @@ -236,7 +236,20 @@ else > > QT_EMB_PLATFORM = generic > > endif > > > > +ifeq ($(BR2_PACKAGE_QT_X11),y) > > +QT_DEPENDENCIES += fontconfig xlib_libXi xlib_libX11 xlib_libXrender \ > > + xlib_libXcursor xlib_libXrandr xlib_libXext xlib_libXv > > +# Using pkg-config avoids us some logic to redefine and sed again mkspecs files > > +# to add X11 include path and link options > > +QT_CFLAGS += $(shell $(PKG_CONFIG_HOST_BINARY) --cflags x11) > > +QT_CXXFLAGS += $(shell $(PKG_CONFIG_HOST_BINARY) --cflags x11) > > +QT_LDFLAGS += $(shell $(PKG_CONFIG_HOST_BINARY) --libs x11 xext) > > +QT_CONFIGURE_OPTS += -arch $(QT_EMB_PLATFORM) \ > > + -xplatform qws/linux-$(QT_EMB_PLATFORM)-g++ -x11 -no-gtkstyle -no-sm \ > > + -no-openvg > > +else # if BR2_PACKAGE_QT_EMBEDDED > > QT_CONFIGURE_OPTS += -embedded $(QT_EMB_PLATFORM) > > +endif > > > > ifneq ($(BR2_PACKAGE_QT_GUI_MODULE),y) > > QT_CONFIGURE_OPTS += -no-gui > > @@ -652,6 +665,7 @@ define QT_INSTALL_TARGET_IMPORTS > > endef > > > > # Fonts installation > > +ifeq ($(BR2_PACKAGE_QT_EMBEDDED),y) > > ifneq ($(QT_FONTS),) > > define QT_INSTALL_TARGET_FONTS > > mkdir -p $(TARGET_DIR)/usr/lib/fonts > > @@ -665,6 +679,7 @@ define QT_INSTALL_TARGET_FONTS_TTF > > cp -dpf $(STAGING_DIR)/usr/lib/fonts/*.ttf $(TARGET_DIR)/usr/lib/fonts > > endef > > endif > > +endif # BR2_PACKAGE_QT_EMBEDDED > > > > ifeq ($(BR2_PACKAGE_QT_GFX_POWERVR),y) > > define QT_INSTALL_TARGET_POWERVR > > -- > > 2.0.1 > > > > _______________________________________________ > > buildroot mailing list > > buildroot@busybox.net > > http://lists.busybox.net/mailman/listinfo/buildroot > _______________________________________________ > buildroot mailing list > buildroot@busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot
>>>>> "Hadrien" == Hadrien Boutteville <hadrien.boutteville@gmail.com> writes: Hi, Sorry for slow response! > There are two possible configurations for Qt4 installation: standard > (with X11) and embedded (for framebuffer). Both configurations cannot be > used together for one installation and some options are specific to one > configuration or the other. > Add a choice to select the standard or the embedded installation to add > X11 support. > The integration is done in order to make maximum use of the current > configuration logic, for example by using the same mkspecs files. > Signed-off-by: Hadrien Boutteville <hadrien.boutteville@gmail.com> > Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > Cc: "Yann E. MORIN" <yann.morin.1998@free.fr> Committed, thanks.
diff --git a/package/qt/Config.in b/package/qt/Config.in index 0a21e93..abab229 100644 --- a/package/qt/Config.in +++ b/package/qt/Config.in @@ -17,6 +17,40 @@ menuconfig BR2_PACKAGE_QT if BR2_PACKAGE_QT +choice + prompt "Qt installation" + help + Selects the type of installation: standard or embedded + +config BR2_PACKAGE_QT_EMBEDDED + bool "Qt embedded" + help + The embedded Qt installation targets embedded systems without X.org. + Provides backends for framebuffer. + If unsure, say Y. + +comment "Qt standard (X11) not available (need X.org)" + depends on !BR2_PACKAGE_XORG7 + +config BR2_PACKAGE_QT_X11 + bool "Qt standard (X11)" + depends on BR2_PACKAGE_XORG7 + select BR2_PACKAGE_FONTCONFIG + select BR2_PACKAGE_XLIB_LIBXI + select BR2_PACKAGE_XLIB_LIBX11 + select BR2_PACKAGE_XLIB_LIBXRENDER + select BR2_PACKAGE_XLIB_LIBXCURSOR + select BR2_PACKAGE_XLIB_LIBXRANDR + select BR2_PACKAGE_XLIB_LIBXEXT + select BR2_PACKAGE_XLIB_LIBXV + select BR2_PACKAGE_QT_SYSTEMFREETYPE + select BR2_PACKAGE_QT_GUI_MODULE + help + The standard Qt installation provides X.org backend. If you don't want to + use X.org, say N. + +endchoice + config BR2_PACKAGE_QT_DEBUG bool "Compile with debug support" help @@ -98,6 +132,9 @@ config BR2_PACKAGE_QT_GUI_MODULE video output, or you don't require Qt GUI, say n. if BR2_PACKAGE_QT_GUI_MODULE + +if BR2_PACKAGE_QT_EMBEDDED + menu "Pixel depths" comment "Deselecting each option leads to Qt's default (8,16,32)" @@ -155,6 +192,8 @@ config BR2_PACKAGE_QT_FONT_UNIFONT endmenu +endif # BR2_PACKAGE_QT_EMBEDDED + choice prompt "freetype2 support" default BR2_PACKAGE_QT_NOFREETYPE @@ -163,11 +202,16 @@ choice config BR2_PACKAGE_QT_NOFREETYPE bool "no freetype2 support" + depends on BR2_PACKAGE_QT_EMBEDDED help Do not compile in Freetype2 support. +comment "Qt freetype2 needs Qt embedded" + depends on BR2_PACKAGE_QT_X11 + config BR2_PACKAGE_QT_QTFREETYPE bool "Qt freetype2" + depends on BR2_PACKAGE_QT_EMBEDDED help Use the libfreetype bundled with Qt. @@ -268,9 +312,11 @@ endchoice source "package/qt/Config.sql.in" if BR2_PACKAGE_QT_GUI_MODULE +if BR2_PACKAGE_QT_EMBEDDED source "package/qt/Config.gfx.in" source "package/qt/Config.mouse.in" source "package/qt/Config.keyboard.in" +endif config BR2_PACKAGE_QT_PHONON bool "Phonon Module" diff --git a/package/qt/qt.mk b/package/qt/qt.mk index 6d01023..0513416 100644 --- a/package/qt/qt.mk +++ b/package/qt/qt.mk @@ -236,7 +236,20 @@ else QT_EMB_PLATFORM = generic endif +ifeq ($(BR2_PACKAGE_QT_X11),y) +QT_DEPENDENCIES += fontconfig xlib_libXi xlib_libX11 xlib_libXrender \ + xlib_libXcursor xlib_libXrandr xlib_libXext xlib_libXv +# Using pkg-config avoids us some logic to redefine and sed again mkspecs files +# to add X11 include path and link options +QT_CFLAGS += $(shell $(PKG_CONFIG_HOST_BINARY) --cflags x11) +QT_CXXFLAGS += $(shell $(PKG_CONFIG_HOST_BINARY) --cflags x11) +QT_LDFLAGS += $(shell $(PKG_CONFIG_HOST_BINARY) --libs x11 xext) +QT_CONFIGURE_OPTS += -arch $(QT_EMB_PLATFORM) \ + -xplatform qws/linux-$(QT_EMB_PLATFORM)-g++ -x11 -no-gtkstyle -no-sm \ + -no-openvg +else # if BR2_PACKAGE_QT_EMBEDDED QT_CONFIGURE_OPTS += -embedded $(QT_EMB_PLATFORM) +endif ifneq ($(BR2_PACKAGE_QT_GUI_MODULE),y) QT_CONFIGURE_OPTS += -no-gui @@ -652,6 +665,7 @@ define QT_INSTALL_TARGET_IMPORTS endef # Fonts installation +ifeq ($(BR2_PACKAGE_QT_EMBEDDED),y) ifneq ($(QT_FONTS),) define QT_INSTALL_TARGET_FONTS mkdir -p $(TARGET_DIR)/usr/lib/fonts @@ -665,6 +679,7 @@ define QT_INSTALL_TARGET_FONTS_TTF cp -dpf $(STAGING_DIR)/usr/lib/fonts/*.ttf $(TARGET_DIR)/usr/lib/fonts endef endif +endif # BR2_PACKAGE_QT_EMBEDDED ifeq ($(BR2_PACKAGE_QT_GFX_POWERVR),y) define QT_INSTALL_TARGET_POWERVR
There are two possible configurations for Qt4 installation: standard (with X11) and embedded (for framebuffer). Both configurations cannot be used together for one installation and some options are specific to one configuration or the other. Add a choice to select the standard or the embedded installation to add X11 support. The integration is done in order to make maximum use of the current configuration logic, for example by using the same mkspecs files. Signed-off-by: Hadrien Boutteville <hadrien.boutteville@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: "Yann E. MORIN" <yann.morin.1998@free.fr> --- For now I only tested under Qemu without all modules (successfully). I will do more tests on an ARM target, but feel free to test on your side ;-). --- package/qt/Config.in | 46 ++++++++++++++++++++++++++++++++++++++++++++++ package/qt/qt.mk | 15 +++++++++++++++ 2 files changed, 61 insertions(+)