| Message ID | 1413991848-28495-1-git-send-email-jean-michel.hautbois@vodalys.com |
|---|---|
| State | Superseded |
| Headers | show |
Hi Jean-Michel, Thank you for the patch. On Wednesday 22 October 2014 17:30:47 Jean-Michel Hautbois wrote: > Some I2C devices have multiple addresses assigned, for example each address > corresponding to a different internal register map page of the device. > So far drivers which need support for this have handled this with a driver > specific and non-generic implementation, e.g. passing the additional address > via platform data. > > This patch provides a new helper function called i2c_new_secondary_device() > which is intended to provide a generic way to get the secondary address > as well as instantiate a struct i2c_client for the secondary address. > > The function expects a pointer to the primary i2c_client, a name > for the secondary address and an optional default address. The name is used > as a handle to specify which secondary address to get. > > The default address is used as a fallback in case no secondary address > was explicitly specified. In case no secondary address and no default > address were specified the function returns NULL. > > For now the function only supports look-up of the secondary address > from devicetree, but it can be extended in the future > to for example support board files and/or ACPI. As this is core code I believe the DT bindings should be documented somewhere in Documentation/devicetree/bindings/i2c/. > Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com> > --- > drivers/i2c/i2c-core.c | 40 ++++++++++++++++++++++++++++++++++++++++ > include/linux/i2c.h | 8 ++++++++ > 2 files changed, 48 insertions(+) > > diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c > index 2f90ac6..fd3b07c 100644 > --- a/drivers/i2c/i2c-core.c > +++ b/drivers/i2c/i2c-core.c > @@ -1166,6 +1166,46 @@ struct i2c_client *i2c_new_dummy(struct i2c_adapter > *adapter, u16 address) } > EXPORT_SYMBOL_GPL(i2c_new_dummy); > > +/** > + * i2c_new_secondary_device - Helper to get the instantiated secondary > address It does more than that, it also creates the device. > + * @client: Handle to the primary client > + * @name: Handle to specify which secondary address to get > + * @default_addr: Used as a fallback if no secondary address was specified > + * Context: can sleep > + * > + * This returns an I2C client bound to the "dummy" driver based on DT > parsing. Could you elaborate on that ? I would explain that the address is retrieved from the firmware based on the name, and that default_addr is used in case the firmware doesn't provide any information. > + * > + * This returns the new i2c client, which should be saved for later use > with > + * i2c_unregister_device(); or NULL to indicate an error. > + */ > +struct i2c_client *i2c_new_secondary_device(struct i2c_client *client, > + const char *name, > + u16 default_addr) > +{ > + int i; > + u32 addr; > + struct device_node *np; > + > + np = client->dev.of_node; > + > + if (np) { > + i = of_property_match_string(np, "reg-names", name); > + if (i >= 0) > + of_property_read_u32_index(np, "reg", i, &addr); This call could fail in which case addr will be uninitialized. > + else if (default_addr != 0) > + addr = default_addr; > + else > + addr = NULL; addr isn't a pointer. I'm surprised the compiler hasn't warned you. > + } else { > + addr = default_addr; > + } The whole logic can be simplified to struct device_node *np = client->dev.of_node; u32 addr = default_addr; int i; if (np) { i = of_property_match_string(np, "reg-names", name); if (i >= 0) of_property_read_u32_index(np, "reg", i, &addr); } > + > + dev_dbg(&client->adapter->dev, "Address for %s : 0x%x\n", name, addr); > + return i2c_new_dummy(client->adapter, addr); > +} > +EXPORT_SYMBOL_GPL(i2c_new_secondary_device); > + > + > /* > ------------------------------------------------------------------------- > */ > > /* I2C bus adapters -- one roots each I2C or SMBUS segment */ > diff --git a/include/linux/i2c.h b/include/linux/i2c.h > index b556e0a..8629287 100644 > --- a/include/linux/i2c.h > +++ b/include/linux/i2c.h > @@ -322,6 +322,14 @@ extern int i2c_probe_func_quick_read(struct i2c_adapter > *, unsigned short addr); extern struct i2c_client * > i2c_new_dummy(struct i2c_adapter *adap, u16 address); > > +/* Helper function providing a generic way to get the secondary address > + * as well as a client handle to this extra address. > + */ The function is already documented in i2c-core.c, I would ditch this comment. > +extern struct i2c_client * > +i2c_new_secondary_device(struct i2c_client *client, > + const char *name, > + u16 default_addr); > + > extern void i2c_unregister_device(struct i2c_client *); > #endif /* I2C */
Hi Laurent, Thank you for your review, 2014-10-23 1:37 GMT+02:00 Laurent Pinchart <laurent.pinchart@ideasonboard.com>: > Hi Jean-Michel, > > Thank you for the patch. > > On Wednesday 22 October 2014 17:30:47 Jean-Michel Hautbois wrote: >> Some I2C devices have multiple addresses assigned, for example each address >> corresponding to a different internal register map page of the device. >> So far drivers which need support for this have handled this with a driver >> specific and non-generic implementation, e.g. passing the additional address >> via platform data. >> >> This patch provides a new helper function called i2c_new_secondary_device() >> which is intended to provide a generic way to get the secondary address >> as well as instantiate a struct i2c_client for the secondary address. >> >> The function expects a pointer to the primary i2c_client, a name >> for the secondary address and an optional default address. The name is used >> as a handle to specify which secondary address to get. >> >> The default address is used as a fallback in case no secondary address >> was explicitly specified. In case no secondary address and no default >> address were specified the function returns NULL. >> >> For now the function only supports look-up of the secondary address >> from devicetree, but it can be extended in the future >> to for example support board files and/or ACPI. > > As this is core code I believe the DT bindings should be documented somewhere > in Documentation/devicetree/bindings/i2c/. Mmh, probably yes, but I don't know where precisely, as all the bindings are devices specific here... >> Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com> >> --- >> drivers/i2c/i2c-core.c | 40 ++++++++++++++++++++++++++++++++++++++++ >> include/linux/i2c.h | 8 ++++++++ >> 2 files changed, 48 insertions(+) >> >> diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c >> index 2f90ac6..fd3b07c 100644 >> --- a/drivers/i2c/i2c-core.c >> +++ b/drivers/i2c/i2c-core.c >> @@ -1166,6 +1166,46 @@ struct i2c_client *i2c_new_dummy(struct i2c_adapter >> *adapter, u16 address) } >> EXPORT_SYMBOL_GPL(i2c_new_dummy); >> >> +/** >> + * i2c_new_secondary_device - Helper to get the instantiated secondary >> address > > It does more than that, it also creates the device. Right, how about : + * i2c_new_secondary_device - Helper to get the instantiated secondary address + * and create the associated device >> + * @client: Handle to the primary client >> + * @name: Handle to specify which secondary address to get >> + * @default_addr: Used as a fallback if no secondary address was specified >> + * Context: can sleep >> + * >> + * This returns an I2C client bound to the "dummy" driver based on DT >> parsing. > > Could you elaborate on that ? I would explain that the address is retrieved > from the firmware based on the name, and that default_addr is used in case the > firmware doesn't provide any information. Something like that ? + * This returns an I2C client bound to the "dummy" driver based on DT parsing. + * It retrieves the address based on the name. + * It uses default_addr if no information is provided by firmware. >> + * >> + * This returns the new i2c client, which should be saved for later use >> with >> + * i2c_unregister_device(); or NULL to indicate an error. >> + */ >> +struct i2c_client *i2c_new_secondary_device(struct i2c_client *client, >> + const char *name, >> + u16 default_addr) >> +{ >> + int i; >> + u32 addr; >> + struct device_node *np; >> + >> + np = client->dev.of_node; >> + >> + if (np) { >> + i = of_property_match_string(np, "reg-names", name); >> + if (i >= 0) >> + of_property_read_u32_index(np, "reg", i, &addr); > > This call could fail in which case addr will be uninitialized. > >> + else if (default_addr != 0) >> + addr = default_addr; >> + else >> + addr = NULL; > > addr isn't a pointer. I'm surprised the compiler hasn't warned you. It has, just didn't notice it, sorry fir the noise. >> + } else { >> + addr = default_addr; >> + } > > The whole logic can be simplified to > > struct device_node *np = client->dev.of_node; > u32 addr = default_addr; > int i; > > if (np) { > i = of_property_match_string(np, "reg-names", name); > if (i >= 0) > of_property_read_u32_index(np, "reg", i, &addr); > } > OK, applied on my side. Thanks, JM -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Jean-Michel, On Thursday 23 October 2014 07:59:53 Jean-Michel Hautbois wrote: > 2014-10-23 1:37 GMT+02:00 Laurent Pinchart: > > On Wednesday 22 October 2014 17:30:47 Jean-Michel Hautbois wrote: > >> Some I2C devices have multiple addresses assigned, for example each > >> address corresponding to a different internal register map page of the > >> device. So far drivers which need support for this have handled this with > >> a driver specific and non-generic implementation, e.g. passing the > >> additional address via platform data. > >> > >> This patch provides a new helper function called > >> i2c_new_secondary_device() > >> which is intended to provide a generic way to get the secondary address > >> as well as instantiate a struct i2c_client for the secondary address. > >> > >> The function expects a pointer to the primary i2c_client, a name > >> for the secondary address and an optional default address. The name is > >> used as a handle to specify which secondary address to get. > >> > >> The default address is used as a fallback in case no secondary address > >> was explicitly specified. In case no secondary address and no default > >> address were specified the function returns NULL. > >> > >> For now the function only supports look-up of the secondary address > >> from devicetree, but it can be extended in the future > >> to for example support board files and/or ACPI. > > > > As this is core code I believe the DT bindings should be documented > > somewhere in Documentation/devicetree/bindings/i2c/. > > Mmh, probably yes, but I don't know where precisely, as all the > bindings are devices specific here... Lucky you, you can create the I2C core DT bindings documentation :-) Documentation/devicetree/bindings/i2c/i2c.txt sounds like a good candidate. > >> Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com> > >> --- > >> > >> drivers/i2c/i2c-core.c | 40 ++++++++++++++++++++++++++++++++++++++++ > >> include/linux/i2c.h | 8 ++++++++ > >> 2 files changed, 48 insertions(+) > >> > >> diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c > >> index 2f90ac6..fd3b07c 100644 > >> --- a/drivers/i2c/i2c-core.c > >> +++ b/drivers/i2c/i2c-core.c > >> @@ -1166,6 +1166,46 @@ struct i2c_client *i2c_new_dummy(struct > >> i2c_adapter > >> *adapter, u16 address) } > >> > >> EXPORT_SYMBOL_GPL(i2c_new_dummy); > >> > >> +/** > >> + * i2c_new_secondary_device - Helper to get the instantiated secondary > >> address > > > > It does more than that, it also creates the device. > > Right, how about : > + * i2c_new_secondary_device - Helper to get the instantiated secondary > address > + * and create the associated device > > >> + * @client: Handle to the primary client > >> + * @name: Handle to specify which secondary address to get > >> + * @default_addr: Used as a fallback if no secondary address was > >> specified > >> + * Context: can sleep > >> + * > >> + * This returns an I2C client bound to the "dummy" driver based on DT > >> parsing. > > > > Could you elaborate on that ? I would explain that the address is > > retrieved from the firmware based on the name, and that default_addr is > > used in case the firmware doesn't provide any information. > > Something like that ? > + * This returns an I2C client bound to the "dummy" driver based on DT > parsing. > + * It retrieves the address based on the name. > + * It uses default_addr if no information is provided by firmware. "I2C clients can be composed of multiple I2C slaves bound together in a single component. The I2C client driver then binds to the master I2C slave and needs to create I2C dummy clients to communicate with all the other slaves. This function creates an returns an I2C dummy client whose I2C address is retrieved from the platform firmware based on the given slave name. If no address is specified by the firmware default_addr is used. On DT-based platforms the address is retrieved from the "reg" property entry cell whose "reg-names" value matches the slave name." > >> + * > >> + * This returns the new i2c client, which should be saved for later use > >> with > >> + * i2c_unregister_device(); or NULL to indicate an error. > >> + */ > >> +struct i2c_client *i2c_new_secondary_device(struct i2c_client *client, > >> + const char *name, > >> + u16 default_addr) > >> +{ > >> + int i; > >> + u32 addr; > >> + struct device_node *np; > >> + > >> + np = client->dev.of_node; > >> + > >> + if (np) { > >> + i = of_property_match_string(np, "reg-names", name); > >> + if (i >= 0) > >> + of_property_read_u32_index(np, "reg", i, &addr); > > > > This call could fail in which case addr will be uninitialized. > > > >> + else if (default_addr != 0) > >> + addr = default_addr; > >> + else > >> + addr = NULL; > > > > addr isn't a pointer. I'm surprised the compiler hasn't warned you. > > It has, just didn't notice it, sorry fir the noise. > > >> + } else { > >> + addr = default_addr; > >> + } > > > > The whole logic can be simplified to > > > > struct device_node *np = client->dev.of_node; > > u32 addr = default_addr; > > int i; > > > > if (np) { > > i = of_property_match_string(np, "reg-names", name); > > if (i >= 0) > > of_property_read_u32_index(np, "reg", i, &addr); > > } > > OK, applied on my side.
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 2f90ac6..fd3b07c 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -1166,6 +1166,46 @@ struct i2c_client *i2c_new_dummy(struct i2c_adapter *adapter, u16 address) } EXPORT_SYMBOL_GPL(i2c_new_dummy); +/** + * i2c_new_secondary_device - Helper to get the instantiated secondary address + * @client: Handle to the primary client + * @name: Handle to specify which secondary address to get + * @default_addr: Used as a fallback if no secondary address was specified + * Context: can sleep + * + * This returns an I2C client bound to the "dummy" driver based on DT parsing. + * + * This returns the new i2c client, which should be saved for later use with + * i2c_unregister_device(); or NULL to indicate an error. + */ +struct i2c_client *i2c_new_secondary_device(struct i2c_client *client, + const char *name, + u16 default_addr) +{ + int i; + u32 addr; + struct device_node *np; + + np = client->dev.of_node; + + if (np) { + i = of_property_match_string(np, "reg-names", name); + if (i >= 0) + of_property_read_u32_index(np, "reg", i, &addr); + else if (default_addr != 0) + addr = default_addr; + else + addr = NULL; + } else { + addr = default_addr; + } + + dev_dbg(&client->adapter->dev, "Address for %s : 0x%x\n", name, addr); + return i2c_new_dummy(client->adapter, addr); +} +EXPORT_SYMBOL_GPL(i2c_new_secondary_device); + + /* ------------------------------------------------------------------------- */ /* I2C bus adapters -- one roots each I2C or SMBUS segment */ diff --git a/include/linux/i2c.h b/include/linux/i2c.h index b556e0a..8629287 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -322,6 +322,14 @@ extern int i2c_probe_func_quick_read(struct i2c_adapter *, unsigned short addr); extern struct i2c_client * i2c_new_dummy(struct i2c_adapter *adap, u16 address); +/* Helper function providing a generic way to get the secondary address + * as well as a client handle to this extra address. + */ +extern struct i2c_client * +i2c_new_secondary_device(struct i2c_client *client, + const char *name, + u16 default_addr); + extern void i2c_unregister_device(struct i2c_client *); #endif /* I2C */
Some I2C devices have multiple addresses assigned, for example each address corresponding to a different internal register map page of the device. So far drivers which need support for this have handled this with a driver specific and non-generic implementation, e.g. passing the additional address via platform data. This patch provides a new helper function called i2c_new_secondary_device() which is intended to provide a generic way to get the secondary address as well as instantiate a struct i2c_client for the secondary address. The function expects a pointer to the primary i2c_client, a name for the secondary address and an optional default address. The name is used as a handle to specify which secondary address to get. The default address is used as a fallback in case no secondary address was explicitly specified. In case no secondary address and no default address were specified the function returns NULL. For now the function only supports look-up of the secondary address from devicetree, but it can be extended in the future to for example support board files and/or ACPI. Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com> --- drivers/i2c/i2c-core.c | 40 ++++++++++++++++++++++++++++++++++++++++ include/linux/i2c.h | 8 ++++++++ 2 files changed, 48 insertions(+)