diff mbox

[2/2,v2] powerpc: Make the CMM memory hotplug aware

Message ID 20091002185248.GD4908@austin.ibm.com (mailing list archive)
State Superseded
Headers show

Commit Message

Robert Jennings Oct. 2, 2009, 6:52 p.m. UTC
The Collaborative Memory Manager (CMM) module allocates individual pages
over time that are not migratable.  On a long running system this can
severely impact the ability to find enough pages to support a hotplug
memory remove operation.

This patch adds a memory isolation notifier and a memory hotplug notifier.
The memory isolation notifier will return the number of pages found
in the range specified.  This is used to determine if all of the used
pages in a pageblock are owned by the balloon (or other entities in
the notifier chain).  The hotplug notifier will free pages in the range
which is to be removed.  The priority of this hotplug notifier is low
so that it will be called near last, this helps avoids removing loaned
pages in operations that fail due to other handlers.

CMM activity will be halted when hotplug remove operations are active
and resume activity after a delay period to allow the hypervisor time
to adjust.

Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>

---
Minor update to cmm_count_pages() to account for changes in
struct memory_isolate_notify.
---
 arch/powerpc/platforms/pseries/cmm.c |  207 ++++++++++++++++++++++++++++++++++-
 1 file changed, 201 insertions(+), 6 deletions(-)

Comments

Gerald Schaefer Oct. 8, 2009, 12:12 p.m. UTC | #1
Hi,

I am currently working on the s390 port for the cmm + hotplug
patch, and I'm a little confused about the memory allocation
policy, see below. Is it correct that the balloon cannot grow
into ZONE_MOVABLE, while the pages for the balloon page list
can?

Robert Jennings wrote:
> @@ -110,6 +125,9 @@ static long cmm_alloc_pages(long nr)
>  	cmm_dbg("Begin request for %ld pages\n", nr);
> 
>  	while (nr) {
> +		if (atomic_read(&hotplug_active))
> +			break;
> +
>  		addr = __get_free_page(GFP_NOIO | __GFP_NOWARN |
>  				       __GFP_NORETRY | __GFP_NOMEMALLOC);
>  		if (!addr)
> @@ -119,8 +137,10 @@ static long cmm_alloc_pages(long nr)
>  		if (!pa || pa->index >= CMM_NR_PAGES) {
>  			/* Need a new page for the page list. */
>  			spin_unlock(&cmm_lock);
> -			npa = (struct cmm_page_array *)__get_free_page(GFP_NOIO | __GFP_NOWARN |
> -								       __GFP_NORETRY | __GFP_NOMEMALLOC);
> +			npa = (struct cmm_page_array *)__get_free_page(
> +					GFP_NOIO | __GFP_NOWARN |
> +					__GFP_NORETRY | __GFP_NOMEMALLOC |
> +					__GFP_MOVABLE);
>  			if (!npa) {
>  				pr_info("%s: Can not allocate new page list\n", __func__);
>  				free_page(addr);

Why is the __GFP_MOVABLE added here, for the page list alloc, and not
above for the balloon page alloc?

--
Regards,
Gerald
Robert Jennings Oct. 8, 2009, 1:13 p.m. UTC | #2
* Gerald Schaefer (geralds@linux.vnet.ibm.com) wrote:
> Hi,
>
> I am currently working on the s390 port for the cmm + hotplug
> patch, and I'm a little confused about the memory allocation
> policy, see below. Is it correct that the balloon cannot grow
> into ZONE_MOVABLE, while the pages for the balloon page list
> can?
>
> Robert Jennings wrote:
>> @@ -110,6 +125,9 @@ static long cmm_alloc_pages(long nr)
>>  	cmm_dbg("Begin request for %ld pages\n", nr);
>>
>>  	while (nr) {
>> +		if (atomic_read(&hotplug_active))
>> +			break;
>> +
>>  		addr = __get_free_page(GFP_NOIO | __GFP_NOWARN |
>>  				       __GFP_NORETRY | __GFP_NOMEMALLOC);
>>  		if (!addr)
>> @@ -119,8 +137,10 @@ static long cmm_alloc_pages(long nr)
>>  		if (!pa || pa->index >= CMM_NR_PAGES) {
>>  			/* Need a new page for the page list. */
>>  			spin_unlock(&cmm_lock);
>> -			npa = (struct cmm_page_array *)__get_free_page(GFP_NOIO | __GFP_NOWARN |
>> -								       __GFP_NORETRY | __GFP_NOMEMALLOC);
>> +			npa = (struct cmm_page_array *)__get_free_page(
>> +					GFP_NOIO | __GFP_NOWARN |
>> +					__GFP_NORETRY | __GFP_NOMEMALLOC |
>> +					__GFP_MOVABLE);
>>  			if (!npa) {
>>  				pr_info("%s: Can not allocate new page list\n", __func__);
>>  				free_page(addr);
>
> Why is the __GFP_MOVABLE added here, for the page list alloc, and not
> above for the balloon page alloc?

The pages allocated as __GFP_MOVABLE are used to store the list of pages
allocated by the balloon.  They reference virtual addresses and it would
be fine for the kernel to migrate the physical pages for those, the
balloon would not notice this.

The pages loaned by the balloon are not allocated with __GFP_MOVABLE
because we will inform the hypervisor which page has been loaned by
Linux according to the physical address.  Migration of those physical
pages would invalidate the loan, so we do not mark them as movable.

Regards,
Robert Jennings
Gerald Schaefer Oct. 15, 2009, 6:21 p.m. UTC | #3
Robert Jennings wrote:
>>> @@ -110,6 +125,9 @@ static long cmm_alloc_pages(long nr)
>>>  	cmm_dbg("Begin request for %ld pages\n", nr);
>>>
>>>  	while (nr) {
>>> +		if (atomic_read(&hotplug_active))
>>> +			break;
>>> +
>>>  		addr = __get_free_page(GFP_NOIO | __GFP_NOWARN |
>>>  				       __GFP_NORETRY | __GFP_NOMEMALLOC);
>>>  		if (!addr)
>>> @@ -119,8 +137,10 @@ static long cmm_alloc_pages(long nr)
>>>  		if (!pa || pa->index >= CMM_NR_PAGES) {
>>>  			/* Need a new page for the page list. */
>>>  			spin_unlock(&cmm_lock);
>>> -			npa = (struct cmm_page_array *)__get_free_page(GFP_NOIO | __GFP_NOWARN |
>>> -								       __GFP_NORETRY | __GFP_NOMEMALLOC);
>>> +			npa = (struct cmm_page_array *)__get_free_page(
>>> +					GFP_NOIO | __GFP_NOWARN |
>>> +					__GFP_NORETRY | __GFP_NOMEMALLOC |
>>> +					__GFP_MOVABLE);
>>>  			if (!npa) {
>>>  				pr_info("%s: Can not allocate new page list\n", __func__);
>>>  				free_page(addr);
>> Why is the __GFP_MOVABLE added here, for the page list alloc, and not
>> above for the balloon page alloc?
> 
> The pages allocated as __GFP_MOVABLE are used to store the list of pages
> allocated by the balloon.  They reference virtual addresses and it would
> be fine for the kernel to migrate the physical pages for those, the
> balloon would not notice this.

Does page migration really work for kernel pages that were allocated
with __get_free_page()? I was wondering if we can do this on s390, where
we have a 1:1 mapping of kernel virtual to physical addresses, but
looking at migrate_pages() and friends, it seems that kernel pages
w/o mapping and rmap should not be migrateable at all. Any thoughts from
the memory migration experts?

BTW, since we have real memory hotplug support on s390, allowing us
to add and remove memory chunks to/from ZONE_MOVABLE, this basically
makes cmm ballooning in ZONE_NORMAL obsolete, so we decided not to
support memory hotplug aware cmm on s390.

Regards,
Gerald
Christoph Lameter Oct. 16, 2009, 4:48 p.m. UTC | #4
On Thu, 15 Oct 2009, Gerald Schaefer wrote:

> > The pages allocated as __GFP_MOVABLE are used to store the list of pages
> > allocated by the balloon.  They reference virtual addresses and it would
> > be fine for the kernel to migrate the physical pages for those, the
> > balloon would not notice this.
>
> Does page migration really work for kernel pages that were allocated
> with __get_free_page()? I was wondering if we can do this on s390, where
> we have a 1:1 mapping of kernel virtual to physical addresses, but
> looking at migrate_pages() and friends, it seems that kernel pages
> w/o mapping and rmap should not be migrateable at all. Any thoughts from
> the memory migration experts?

page migration only works for pages where we have some way of accounting
for all the references to a page. This usually mean using reverse mappings
(anon list, radix trees and page tables).
diff mbox

Patch

Index: b/arch/powerpc/platforms/pseries/cmm.c
===================================================================
--- a/arch/powerpc/platforms/pseries/cmm.c
+++ b/arch/powerpc/platforms/pseries/cmm.c
@@ -38,19 +38,28 @@ 
 #include <asm/mmu.h>
 #include <asm/pgalloc.h>
 #include <asm/uaccess.h>
+#include <linux/memory.h>
 
 #include "plpar_wrappers.h"
 
 #define CMM_DRIVER_VERSION	"1.0.0"
 #define CMM_DEFAULT_DELAY	1
+#define CMM_HOTPLUG_DELAY	5
 #define CMM_DEBUG			0
 #define CMM_DISABLE		0
 #define CMM_OOM_KB		1024
 #define CMM_MIN_MEM_MB		256
 #define KB2PAGES(_p)		((_p)>>(PAGE_SHIFT-10))
 #define PAGES2KB(_p)		((_p)<<(PAGE_SHIFT-10))
+/*
+ * The priority level tries to ensure that this notifier is called as
+ * late as possible to reduce thrashing in the shared memory pool.
+ */
+#define CMM_MEM_HOTPLUG_PRI	1
+#define CMM_MEM_ISOLATE_PRI	15
 
 static unsigned int delay = CMM_DEFAULT_DELAY;
+static unsigned int hotplug_delay = CMM_HOTPLUG_DELAY;
 static unsigned int oom_kb = CMM_OOM_KB;
 static unsigned int cmm_debug = CMM_DEBUG;
 static unsigned int cmm_disabled = CMM_DISABLE;
@@ -65,6 +74,10 @@  MODULE_VERSION(CMM_DRIVER_VERSION);
 module_param_named(delay, delay, uint, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(delay, "Delay (in seconds) between polls to query hypervisor paging requests. "
 		 "[Default=" __stringify(CMM_DEFAULT_DELAY) "]");
+module_param_named(hotplug_delay, hotplug_delay, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(delay, "Delay (in seconds) after memory hotplug remove "
+		 "before activity resumes. "
+		 "[Default=" __stringify(CMM_HOTPLUG_DELAY) "]");
 module_param_named(oom_kb, oom_kb, uint, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(oom_kb, "Amount of memory in kb to free on OOM. "
 		 "[Default=" __stringify(CMM_OOM_KB) "]");
@@ -88,6 +101,8 @@  struct cmm_page_array {
 static unsigned long loaned_pages;
 static unsigned long loaned_pages_target;
 static unsigned long oom_freed_pages;
+static atomic_t hotplug_active = ATOMIC_INIT(0);
+static atomic_t hotplug_occurred = ATOMIC_INIT(0);
 
 static struct cmm_page_array *cmm_page_list;
 static DEFINE_SPINLOCK(cmm_lock);
@@ -110,6 +125,9 @@  static long cmm_alloc_pages(long nr)
 	cmm_dbg("Begin request for %ld pages\n", nr);
 
 	while (nr) {
+		if (atomic_read(&hotplug_active))
+			break;
+
 		addr = __get_free_page(GFP_NOIO | __GFP_NOWARN |
 				       __GFP_NORETRY | __GFP_NOMEMALLOC);
 		if (!addr)
@@ -119,8 +137,10 @@  static long cmm_alloc_pages(long nr)
 		if (!pa || pa->index >= CMM_NR_PAGES) {
 			/* Need a new page for the page list. */
 			spin_unlock(&cmm_lock);
-			npa = (struct cmm_page_array *)__get_free_page(GFP_NOIO | __GFP_NOWARN |
-								       __GFP_NORETRY | __GFP_NOMEMALLOC);
+			npa = (struct cmm_page_array *)__get_free_page(
+					GFP_NOIO | __GFP_NOWARN |
+					__GFP_NORETRY | __GFP_NOMEMALLOC |
+					__GFP_MOVABLE);
 			if (!npa) {
 				pr_info("%s: Can not allocate new page list\n", __func__);
 				free_page(addr);
@@ -273,9 +293,23 @@  static int cmm_thread(void *dummy)
 	while (1) {
 		timeleft = msleep_interruptible(delay * 1000);
 
-		if (kthread_should_stop() || timeleft) {
-			loaned_pages_target = loaned_pages;
+		if (kthread_should_stop() || timeleft)
 			break;
+
+		if (atomic_read(&hotplug_active)) {
+			cmm_dbg("Hotplug operation in progress, activity "
+					"suspended\n");
+			continue;
+		}
+
+		if (atomic_dec_if_positive(&hotplug_occurred) >= 0) {
+			cmm_dbg("Hotplug operation has occurred, loaning "
+					"activity suspended for %d seconds.\n",
+					hotplug_delay);
+			timeleft = msleep_interruptible(hotplug_delay * 1000);
+			if (kthread_should_stop() || timeleft)
+				break;
+			continue;
 		}
 
 		cmm_get_mpp();
@@ -405,6 +439,159 @@  static struct notifier_block cmm_reboot_
 };
 
 /**
+ * cmm_count_pages - Count the number of pages loaned in a particular range.
+ *
+ * @arg: memory_isolate_notify structure with address range and count
+ *
+ * Return value:
+ *      0 on success
+ **/
+static unsigned long cmm_count_pages(void *arg)
+{
+	struct memory_isolate_notify *marg = arg;
+	struct cmm_page_array *pa;
+	unsigned long start = (unsigned long)pfn_to_kaddr(marg->start_pfn);
+	unsigned long end = start + (marg->nr_pages << PAGE_SHIFT);
+	unsigned long idx;
+
+	spin_lock(&cmm_lock);
+	pa = cmm_page_list;
+	while (pa) {
+		for (idx = 0; idx < pa->index; idx++)
+			if (pa->page[idx] >= start && pa->page[idx] < end)
+				marg->pages_found++;
+		pa = pa->next;
+	}
+	spin_unlock(&cmm_lock);
+	return 0;
+}
+
+/**
+ * cmm_memory_isolate_cb - Handle memory isolation notifier calls
+ * @self:	notifier block struct
+ * @action:	action to take
+ * @arg:	struct memory_isolate_notify data for handler
+ *
+ * Return value:
+ *	NOTIFY_OK or notifier error based on subfunction return value
+ **/
+static int cmm_memory_isolate_cb(struct notifier_block *self,
+				 unsigned long action, void *arg)
+{
+	int ret = 0;
+
+	if (action == MEM_ISOLATE_COUNT)
+		ret = cmm_count_pages(arg);
+
+	if (ret)
+		ret = notifier_from_errno(ret);
+	else
+		ret = NOTIFY_OK;
+
+	return ret;
+}
+
+static struct notifier_block cmm_mem_isolate_nb = {
+	.notifier_call = cmm_memory_isolate_cb,
+	.priority = CMM_MEM_ISOLATE_PRI
+};
+
+/**
+ * cmm_mem_going_offline - Unloan pages where memory is to be removed
+ * @arg: memory_notify structure with page range to be offlined
+ *
+ * Return value:
+ *	0 on success
+ **/
+static int cmm_mem_going_offline(void *arg)
+{
+	struct memory_notify *marg = arg;
+	unsigned long start_page = (unsigned long)pfn_to_kaddr(marg->start_pfn);
+	unsigned long end_page = start_page + (marg->nr_pages << PAGE_SHIFT);
+	struct cmm_page_array *pa_curr, *pa_last;
+	unsigned long idx;
+	unsigned long freed = 0;
+
+	cmm_dbg("Memory going offline, searching 0x%lx (%ld pages).\n",
+			start_page, marg->nr_pages);
+	spin_lock(&cmm_lock);
+
+	pa_last = pa_curr = cmm_page_list;
+	while (pa_curr) {
+		for (idx = (pa_curr->index - 1); (idx + 1) > 0; idx--) {
+			if ((pa_curr->page[idx] < start_page) ||
+			    (pa_curr->page[idx] >= end_page))
+				continue;
+
+			plpar_page_set_active(__pa(pa_curr->page[idx]));
+			free_page(pa_curr->page[idx]);
+			freed++;
+			loaned_pages--;
+			totalram_pages++;
+			pa_curr->page[idx] = pa_last->page[--pa_last->index];
+			if (pa_last->index == 0) {
+				if (pa_curr == pa_last)
+					pa_curr = pa_last->next;
+				pa_last = pa_last->next;
+				free_page((unsigned long)cmm_page_list);
+				cmm_page_list = pa_last;
+				continue;
+			}
+		}
+		pa_curr = pa_curr->next;
+	}
+	atomic_set(&hotplug_occurred, 1);
+	spin_unlock(&cmm_lock);
+	cmm_dbg("Released %ld pages in the search range.\n", freed);
+
+	return 0;
+}
+
+/**
+ * cmm_memory_cb - Handle memory hotplug notifier calls
+ * @self:	notifier block struct
+ * @action:	action to take
+ * @arg:	struct memory_notify data for handler
+ *
+ * Return value:
+ *	NOTIFY_OK or notifier error based on subfunction return value
+ *
+ **/
+static int cmm_memory_cb(struct notifier_block *self,
+			unsigned long action, void *arg)
+{
+	int ret = 0;
+
+	switch (action) {
+	case MEM_GOING_OFFLINE:
+		atomic_set(&hotplug_active, 1);
+		ret = cmm_mem_going_offline(arg);
+		break;
+	case MEM_OFFLINE:
+	case MEM_CANCEL_OFFLINE:
+		atomic_set(&hotplug_active, 0);
+		cmm_dbg("Memory offline operation complete.\n");
+		break;
+	case MEM_GOING_ONLINE:
+	case MEM_ONLINE:
+	case MEM_CANCEL_ONLINE:
+		break;
+	}
+
+	if (ret)
+		ret = notifier_from_errno(ret);
+	else
+		ret = NOTIFY_OK;
+
+	return ret;
+}
+
+static struct notifier_block cmm_mem_nb = {
+	.notifier_call = cmm_memory_cb,
+	.priority = CMM_MEM_HOTPLUG_PRI
+};
+
+/**
  * cmm_init - Module initialization
  *
  * Return value:
@@ -426,18 +613,24 @@  static int cmm_init(void)
 	if ((rc = cmm_sysfs_register(&cmm_sysdev)))
 		goto out_reboot_notifier;
 
+	if (register_memory_notifier(&cmm_mem_nb) ||
+	    register_memory_isolate_notifier(&cmm_mem_isolate_nb))
+		goto out_unregister_notifier;
+
 	if (cmm_disabled)
 		return rc;
 
 	cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread");
 	if (IS_ERR(cmm_thread_ptr)) {
 		rc = PTR_ERR(cmm_thread_ptr);
-		goto out_unregister_sysfs;
+		goto out_unregister_notifier;
 	}
 
 	return rc;
 
-out_unregister_sysfs:
+out_unregister_notifier:
+	unregister_memory_notifier(&cmm_mem_nb);
+	unregister_memory_isolate_notifier(&cmm_mem_isolate_nb);
 	cmm_unregister_sysfs(&cmm_sysdev);
 out_reboot_notifier:
 	unregister_reboot_notifier(&cmm_reboot_nb);
@@ -458,6 +651,8 @@  static void cmm_exit(void)
 		kthread_stop(cmm_thread_ptr);
 	unregister_oom_notifier(&cmm_oom_nb);
 	unregister_reboot_notifier(&cmm_reboot_nb);
+	unregister_memory_notifier(&cmm_mem_nb);
+	unregister_memory_isolate_notifier(&cmm_mem_isolate_nb);
 	cmm_free_pages(loaned_pages);
 	cmm_unregister_sysfs(&cmm_sysdev);
 }