| Message ID | 20090922003956.GA19947@lnxos.staff.proxad.net |
|---|---|
| State | Superseded, archived |
| Delegated to: | David Miller |
| Headers | show |
Hi Alexandre, Alexandre Cassen wrote: > This patch add support to 6rd tunnel mode currently targetting > standard track at the IETF. > > IPv6 rapid deployment (RFC5569) builds upon mechanisms of 6to4 (RFC3056) > to enable a service provider to rapidly deploy IPv6 unicast service > to IPv4 sites to which it provides customer premise equipment. Like > 6to4, it utilizes stateless IPv6 in IPv4 encapsulation in order to > transit IPv4-only network infrastructure. Unlike 6to4, a 6rd service > provider uses an IPv6 prefix of its own in place of the fixed 6to4 > prefix. I couldn't find RFC 5569 (delayed due to IPR rights?), although I did find the latest 6rd draft, -03. It was showing as Informational, not Standards track, is that right? Just curious. > + case SIOCADD6RD: > + case SIOCCHG6RD: > + if (ip6rd.prefixlen >= 95) { > + err = -EINVAL; > + goto done; > + } > + t->ip6rd_prefix.addr = ip6rd.addr; ipv6_addr_copy(&t->ip6rd_prefix.addr, &ip6rd.addr); is the preferred way to copy the address. -Brian -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Brian, On Mon, 2009-09-21 at 22:39 -0400, Brian Haley wrote: > Hi Alexandre, > > Alexandre Cassen wrote: > > This patch add support to 6rd tunnel mode currently targetting > > standard track at the IETF. > > > > IPv6 rapid deployment (RFC5569) builds upon mechanisms of 6to4 (RFC3056) > > to enable a service provider to rapidly deploy IPv6 unicast service > > to IPv4 sites to which it provides customer premise equipment. Like > > 6to4, it utilizes stateless IPv6 in IPv4 encapsulation in order to > > transit IPv4-only network infrastructure. Unlike 6to4, a 6rd service > > provider uses an IPv6 prefix of its own in place of the fixed 6to4 > > prefix. > > I couldn't find RFC 5569 (delayed due to IPR rights?), although I did find > the latest 6rd draft, -03. It was showing as Informational, not Standards > track, is that right? Just curious. In fact there is currently two draft : 1) https://datatracker.ietf.org/idtracker/draft-despres-6rd/ This draft is targeting informational RFC as an independent submission. It is currently queued and has been delayed since may for IPR. 2) http://tools.ietf.org/html/draft-townsley-ipv6-6rd-01 This draft is targeting standard track so work is in progress here. A good sum up has been done by Mark Townsley at last IETF meeting : http://www.ietf.org/proceedings/75/slides/dhc-4.pdf > > + case SIOCADD6RD: > > + case SIOCCHG6RD: > > + if (ip6rd.prefixlen >= 95) { > > + err = -EINVAL; > > + goto done; > > + } > > + t->ip6rd_prefix.addr = ip6rd.addr; > > ipv6_addr_copy(&t->ip6rd_prefix.addr, &ip6rd.addr); is the preferred way to > copy the address. agreed. will fix and resend. regs, Alexandre -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello. Alexandre Cassen wrote: >> I couldn't find RFC 5569 (delayed due to IPR rights?), although I did find >> the latest 6rd draft, -03. It was showing as Informational, not Standards >> track, is that right? Just curious. > > In fact there is currently two draft : > > 1) https://datatracker.ietf.org/idtracker/draft-despres-6rd/ > > This draft is targeting informational RFC as an independent > submission. It is currently queued and has been delayed since may for > IPR. Do you have any pointer about this (IPR)? I probably missed something but I could not find any information in IETF IPR page... --yoshfuji -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
So, you mean, just in case if there are any IPRs? --yoshfuji Mark Townsley wrote: > This is a general problem with all rfc editor submissions right now. It's not > because there is any IPR on the mechanism itself. > > This is the current standards track version: > > http://tools.ietf.org/id/draft-ietf-softwire-ipv6-6rd-00.txt > > We are updating it now based on some discussions, should be published in a week > or so. Mostly minor updates. We are working with Remi closely on all of this. > > This is the latest of Remi's independent drafts: > > http://tools.ietf.org/html/draft-despres-6rd-03 > > - Mark > > YOSHIFUJI Hideaki wrote: >> Hello. >> >> Alexandre Cassen wrote: >> >> >>>> I couldn't find RFC 5569 (delayed due to IPR rights?), although I did find >>>> the latest 6rd draft, -03. It was showing as Informational, not Standards >>>> track, is that right? Just curious. >>>> >>> In fact there is currently two draft : >>> >>> 1) https://datatracker.ietf.org/idtracker/draft-despres-6rd/ >>> >>> This draft is targeting informational RFC as an independent >>> submission. It is currently queued and has been delayed since may for >>> IPR. >>> >> >> Do you have any pointer about this (IPR)? >> I probably missed something but I could not find any >> information in IETF IPR page... >> >> --yoshfuji >> >> > -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h index 5eb9b0f..0d44376 100644 --- a/include/linux/if_tunnel.h +++ b/include/linux/if_tunnel.h @@ -15,6 +15,10 @@ #define SIOCADDPRL (SIOCDEVPRIVATE + 5) #define SIOCDELPRL (SIOCDEVPRIVATE + 6) #define SIOCCHGPRL (SIOCDEVPRIVATE + 7) +#define SIOCGET6RD (SIOCDEVPRIVATE + 8) +#define SIOCADD6RD (SIOCDEVPRIVATE + 9) +#define SIOCDEL6RD (SIOCDEVPRIVATE + 10) +#define SIOCCHG6RD (SIOCDEVPRIVATE + 11) #define GRE_CSUM __cpu_to_be16(0x8000) #define GRE_ROUTING __cpu_to_be16(0x4000) @@ -51,6 +55,12 @@ struct ip_tunnel_prl { /* PRL flags */ #define PRL_DEFAULT 0x0001 +/* 6RD parms */ +struct ip_tunnel_6rd { + struct in6_addr addr; + __u8 prefixlen; +}; + enum { IFLA_GRE_UNSPEC, diff --git a/include/net/ipip.h b/include/net/ipip.h index 5d3036f..fa92c41 100644 --- a/include/net/ipip.h +++ b/include/net/ipip.h @@ -26,6 +26,8 @@ struct ip_tunnel struct ip_tunnel_prl_entry *prl; /* potential router list */ unsigned int prl_count; /* # of entries in PRL */ + + struct ip_tunnel_6rd ip6rd_prefix; /* 6RD SP prefix */ }; /* ISATAP: default interval between RS in secondy */ diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig index ead6c7a..78a565b 100644 --- a/net/ipv6/Kconfig +++ b/net/ipv6/Kconfig @@ -170,6 +170,19 @@ config IPV6_SIT Saying M here will produce a module called sit. If unsure, say Y. +config IPV6_SIT_6RD + bool "IPv6: 6rd tunnel mode (EXPERIMENTAL)" + depends on IPV6_SIT && EXPERIMENTAL + default n + ---help--- + IPv6 rapid deployment (RFC5569) builds upon mechanisms of 6to4 (RFC3056) + to enable a service provider to rapidly deploy IPv6 unicast service + to IPv4 sites to which it provides customer premise equipment. Like + 6to4, it utilizes stateless IPv6 in IPv4 encapsulation in order to + transit IPv4-only network infrastructure. Unlike 6to4, a 6rd service + provider uses an IPv6 prefix of its own in place of the fixed 6to4 + prefix. + config IPV6_NDISC_NODETYPE bool diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index 0ae4f64..ff62e97 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -604,6 +604,30 @@ static inline __be32 try_6to4(struct in6_addr *v6dst) return dst; } +#ifdef CONFIG_IPV6_SIT_6RD +/* Returns the embedded IPv4 address if the IPv6 address comes from + 6rd rule */ + +static inline __be32 try_6rd(struct in6_addr *addr, u8 prefix_len, struct in6_addr *v6dst) +{ + __be32 dst = 0; + + /* isolate addr according to mask */ + if (ipv6_prefix_equal(v6dst, addr, prefix_len)) { + unsigned int d32_off, bits; + + d32_off = prefix_len >> 5; + bits = (prefix_len & 0x1f); + + dst = (ntohl(v6dst->s6_addr32[d32_off]) << bits); + if (bits) + dst |= ntohl(v6dst->s6_addr32[d32_off + 1]) >> (32 - bits); + dst = htonl(dst); + } + return dst; +} +#endif + /* * This function assumes it is being called from dev_queue_xmit() * and that skb is filled properly by that function. @@ -657,6 +681,13 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb, goto tx_error; } +#ifdef CONFIG_IPV6_SIT_6RD + if (!dst && tunnel->ip6rd_prefix.prefixlen) + dst = try_6rd(&tunnel->ip6rd_prefix.addr, + tunnel->ip6rd_prefix.prefixlen, + &iph6->daddr); + else +#endif if (!dst) dst = try_6to4(&iph6->daddr); @@ -848,6 +879,9 @@ ipip6_tunnel_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) int err = 0; struct ip_tunnel_parm p; struct ip_tunnel_prl prl; +#ifdef CONFIG_IPV6_SIT_6RD + struct ip_tunnel_6rd ip6rd; +#endif struct ip_tunnel *t; struct net *net = dev_net(dev); struct sit_net *sitn = net_generic(net, sit_net_id); @@ -987,6 +1021,56 @@ ipip6_tunnel_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) netdev_state_change(dev); break; +#ifdef CONFIG_IPV6_SIT_6RD + case SIOCGET6RD: + err = -EINVAL; + if (dev == sitn->fb_tunnel_dev) + goto done; + err = -ENOENT; + if (!(t = netdev_priv(dev))) + goto done; + memcpy(&ip6rd, &t->ip6rd_prefix, sizeof(ip6rd)); + if (copy_to_user(ifr->ifr_ifru.ifru_data, &ip6rd, sizeof(ip6rd))) + err = -EFAULT; + else + err = 0; + break; + + case SIOCADD6RD: + case SIOCDEL6RD: + case SIOCCHG6RD: + err = -EPERM; + if (!capable(CAP_NET_ADMIN)) + goto done; + err = -EINVAL; + if (dev == sitn->fb_tunnel_dev) + goto done; + err = -EFAULT; + if (copy_from_user(&ip6rd, ifr->ifr_ifru.ifru_data, sizeof(ip6rd))) + goto done; + err = -ENOENT; + if (!(t = netdev_priv(dev))) + goto done; + + err = 0; + switch (cmd) { + case SIOCDEL6RD: + memset(&t->ip6rd_prefix, 0, sizeof(ip6rd)); + break; + case SIOCADD6RD: + case SIOCCHG6RD: + if (ip6rd.prefixlen >= 95) { + err = -EINVAL; + goto done; + } + t->ip6rd_prefix.addr = ip6rd.addr; + t->ip6rd_prefix.prefixlen = ip6rd.prefixlen; + break; + } + netdev_state_change(dev); + break; +#endif + default: err = -EINVAL; }
This patch add support to 6rd tunnel mode currently targetting standard track at the IETF. IPv6 rapid deployment (RFC5569) builds upon mechanisms of 6to4 (RFC3056) to enable a service provider to rapidly deploy IPv6 unicast service to IPv4 sites to which it provides customer premise equipment. Like 6to4, it utilizes stateless IPv6 in IPv4 encapsulation in order to transit IPv4-only network infrastructure. Unlike 6to4, a 6rd service provider uses an IPv6 prefix of its own in place of the fixed 6to4 prefix. Signed-off-by: Alexandre Cassen <acassen@freebox.fr> --- include/linux/if_tunnel.h | 10 +++++ include/net/ipip.h | 2 + net/ipv6/Kconfig | 13 +++++++ net/ipv6/sit.c | 84 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 109 insertions(+), 0 deletions(-)