@@ -15,6 +15,10 @@
#define SIOCADDPRL (SIOCDEVPRIVATE + 5)
#define SIOCDELPRL (SIOCDEVPRIVATE + 6)
#define SIOCCHGPRL (SIOCDEVPRIVATE + 7)
+#define SIOCGET6RD (SIOCDEVPRIVATE + 8)
+#define SIOCADD6RD (SIOCDEVPRIVATE + 9)
+#define SIOCDEL6RD (SIOCDEVPRIVATE + 10)
+#define SIOCCHG6RD (SIOCDEVPRIVATE + 11)
#define GRE_CSUM __cpu_to_be16(0x8000)
#define GRE_ROUTING __cpu_to_be16(0x4000)
@@ -51,6 +55,12 @@ struct ip_tunnel_prl {
/* PRL flags */
#define PRL_DEFAULT 0x0001
+/* 6RD parms */
+struct ip_tunnel_6rd {
+ struct in6_addr addr;
+ __u8 prefixlen;
+};
+
enum
{
IFLA_GRE_UNSPEC,
@@ -26,6 +26,8 @@ struct ip_tunnel
struct ip_tunnel_prl_entry *prl; /* potential router list */
unsigned int prl_count; /* # of entries in PRL */
+
+ struct ip_tunnel_6rd ip6rd_prefix; /* 6RD SP prefix */
};
/* ISATAP: default interval between RS in secondy */
@@ -170,6 +170,19 @@ config IPV6_SIT
Saying M here will produce a module called sit. If unsure, say Y.
+config IPV6_SIT_6RD
+ bool "IPv6: 6rd tunnel mode (EXPERIMENTAL)"
+ depends on IPV6_SIT && EXPERIMENTAL
+ default n
+ ---help---
+ IPv6 rapid deployment (RFC5569) builds upon mechanisms of 6to4 (RFC3056)
+ to enable a service provider to rapidly deploy IPv6 unicast service
+ to IPv4 sites to which it provides customer premise equipment. Like
+ 6to4, it utilizes stateless IPv6 in IPv4 encapsulation in order to
+ transit IPv4-only network infrastructure. Unlike 6to4, a 6rd service
+ provider uses an IPv6 prefix of its own in place of the fixed 6to4
+ prefix.
+
config IPV6_NDISC_NODETYPE
bool
@@ -604,6 +604,30 @@ static inline __be32 try_6to4(struct in6_addr *v6dst)
return dst;
}
+#ifdef CONFIG_IPV6_SIT_6RD
+/* Returns the embedded IPv4 address if the IPv6 address comes from
+ 6rd rule */
+
+static inline __be32 try_6rd(struct in6_addr *addr, u8 prefix_len, struct in6_addr *v6dst)
+{
+ __be32 dst = 0;
+
+ /* isolate addr according to mask */
+ if (ipv6_prefix_equal(v6dst, addr, prefix_len)) {
+ unsigned int d32_off, bits;
+
+ d32_off = prefix_len >> 5;
+ bits = (prefix_len & 0x1f);
+
+ dst = (ntohl(v6dst->s6_addr32[d32_off]) << bits);
+ if (bits)
+ dst |= ntohl(v6dst->s6_addr32[d32_off + 1]) >> (32 - bits);
+ dst = htonl(dst);
+ }
+ return dst;
+}
+#endif
+
/*
* This function assumes it is being called from dev_queue_xmit()
* and that skb is filled properly by that function.
@@ -657,6 +681,13 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb,
goto tx_error;
}
+#ifdef CONFIG_IPV6_SIT_6RD
+ if (!dst && tunnel->ip6rd_prefix.prefixlen)
+ dst = try_6rd(&tunnel->ip6rd_prefix.addr,
+ tunnel->ip6rd_prefix.prefixlen,
+ &iph6->daddr);
+ else
+#endif
if (!dst)
dst = try_6to4(&iph6->daddr);
@@ -848,6 +879,9 @@ ipip6_tunnel_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd)
int err = 0;
struct ip_tunnel_parm p;
struct ip_tunnel_prl prl;
+#ifdef CONFIG_IPV6_SIT_6RD
+ struct ip_tunnel_6rd ip6rd;
+#endif
struct ip_tunnel *t;
struct net *net = dev_net(dev);
struct sit_net *sitn = net_generic(net, sit_net_id);
@@ -987,6 +1021,56 @@ ipip6_tunnel_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd)
netdev_state_change(dev);
break;
+#ifdef CONFIG_IPV6_SIT_6RD
+ case SIOCGET6RD:
+ err = -EINVAL;
+ if (dev == sitn->fb_tunnel_dev)
+ goto done;
+ err = -ENOENT;
+ if (!(t = netdev_priv(dev)))
+ goto done;
+ memcpy(&ip6rd, &t->ip6rd_prefix, sizeof(ip6rd));
+ if (copy_to_user(ifr->ifr_ifru.ifru_data, &ip6rd, sizeof(ip6rd)))
+ err = -EFAULT;
+ else
+ err = 0;
+ break;
+
+ case SIOCADD6RD:
+ case SIOCDEL6RD:
+ case SIOCCHG6RD:
+ err = -EPERM;
+ if (!capable(CAP_NET_ADMIN))
+ goto done;
+ err = -EINVAL;
+ if (dev == sitn->fb_tunnel_dev)
+ goto done;
+ err = -EFAULT;
+ if (copy_from_user(&ip6rd, ifr->ifr_ifru.ifru_data, sizeof(ip6rd)))
+ goto done;
+ err = -ENOENT;
+ if (!(t = netdev_priv(dev)))
+ goto done;
+
+ err = 0;
+ switch (cmd) {
+ case SIOCDEL6RD:
+ memset(&t->ip6rd_prefix, 0, sizeof(ip6rd));
+ break;
+ case SIOCADD6RD:
+ case SIOCCHG6RD:
+ if (ip6rd.prefixlen >= 95) {
+ err = -EINVAL;
+ goto done;
+ }
+ ipv6_addr_copy(&t->ip6rd_prefix.addr, &ip6rd.addr);
+ t->ip6rd_prefix.prefixlen = ip6rd.prefixlen;
+ break;
+ }
+ netdev_state_change(dev);
+ break;
+#endif
+
default:
err = -EINVAL;
}
This patch add support to 6rd tunnel mode currently targetting standard track at the IETF. Patch history : * http://patchwork.ozlabs.org/patch/26870/ * http://patchwork.ozlabs.org/patch/34026/ IPv6 rapid deployment (RFC5569) builds upon mechanisms of 6to4 (RFC3056) to enable a service provider to rapidly deploy IPv6 unicast service to IPv4 sites to which it provides customer premise equipment. Like 6to4, it utilizes stateless IPv6 in IPv4 encapsulation in order to transit IPv4-only network infrastructure. Unlike 6to4, a 6rd service provider uses an IPv6 prefix of its own in place of the fixed 6to4 prefix. Signed-off-by: Alexandre Cassen <acassen@freebox.fr> --- include/linux/if_tunnel.h | 10 +++++ include/net/ipip.h | 2 + net/ipv6/Kconfig | 13 +++++++ net/ipv6/sit.c | 84 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 109 insertions(+), 0 deletions(-)