Message ID | 20090918121321.GB2801@psychotron.redhat.com |
---|---|
State | Accepted, archived |
Delegated to: | David Miller |
Headers | show |
Jiri Pirko wrote: > Primary module parameter passed to bonding is pernament. That means if you typo in "permanent". > release the primary slave and enslave it again, it becomes the primary slave > again. But if you set primary slave via sysfs, the primary slave is only set > once and it's not remembered in bond->params structure. Therefore the setting is > lost after releasing the primary slave. This simple one-liner fixes this. You patch also has the side effect of fixing this strange behavior: If you move the primary slave from one bond device to another one, it becomes the primary for this other bond device, ignoring what you might have set as the primary for this other bond device. #modprobe bonding mode=active-backup primary=eth0 #echo +eth0 > /sys/class/net/bond0/bonding/slaves #cat /sys/class/net/bond0/bonding/primary eth0 #echo -eth0 > /sys/class/net/bond0/bonding/slaves #echo +eth1 > /sys/class/net/bond1/bonding/slaves #echo eth1 > /sys/class/net/bond1/bonding/primary #cat /sys/class/net/bond1/bonding/primary eth1 #echo +eth0 > /sys/class/net/bond1/bonding/slaves #cat /sys/class/net/bond1/bonding/primary eth0 => Primary just changed, for no good reason. Can someone imagine that some current configurations rely on this incredible side effect ? Nicolas. > Signed-off-by: Jiri Pirko <jpirko@redhat.com> > > diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c > index 6044e12..ff449de 100644 > --- a/drivers/net/bonding/bond_sysfs.c > +++ b/drivers/net/bonding/bond_sysfs.c > @@ -1182,6 +1182,7 @@ static ssize_t bonding_store_primary(struct device *d, > ": %s: Setting %s as primary slave.\n", > bond->dev->name, slave->dev->name); > bond->primary_slave = slave; > + strcpy(bond->params.primary, slave->dev->name); > bond_select_active_slave(bond); > goto out; > } -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Jiri Pirko <jpirko@redhat.com> wrote: >Primary module parameter passed to bonding is pernament. That means if you >release the primary slave and enslave it again, it becomes the primary slave >again. But if you set primary slave via sysfs, the primary slave is only set >once and it's not remembered in bond->params structure. Therefore the setting is >lost after releasing the primary slave. This simple one-liner fixes this. > >Signed-off-by: Jiri Pirko <jpirko@redhat.com> > >diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c >index 6044e12..ff449de 100644 >--- a/drivers/net/bonding/bond_sysfs.c >+++ b/drivers/net/bonding/bond_sysfs.c >@@ -1182,6 +1182,7 @@ static ssize_t bonding_store_primary(struct device *d, > ": %s: Setting %s as primary slave.\n", > bond->dev->name, slave->dev->name); > bond->primary_slave = slave; >+ strcpy(bond->params.primary, slave->dev->name); > bond_select_active_slave(bond); > goto out; > } Looks good, fixes another bug I'd not heard of previously. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
From: Jiri Pirko <jpirko@redhat.com> Date: Fri, 18 Sep 2009 14:13:22 +0200 > Primary module parameter passed to bonding is pernament. That means if you > release the primary slave and enslave it again, it becomes the primary slave > again. But if you set primary slave via sysfs, the primary slave is only set > once and it's not remembered in bond->params structure. Therefore the setting is > lost after releasing the primary slave. This simple one-liner fixes this. > > Signed-off-by: Jiri Pirko <jpirko@redhat.com> Applied, thanks Jiri. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 6044e12..ff449de 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -1182,6 +1182,7 @@ static ssize_t bonding_store_primary(struct device *d, ": %s: Setting %s as primary slave.\n", bond->dev->name, slave->dev->name); bond->primary_slave = slave; + strcpy(bond->params.primary, slave->dev->name); bond_select_active_slave(bond); goto out; }
Primary module parameter passed to bonding is pernament. That means if you release the primary slave and enslave it again, it becomes the primary slave again. But if you set primary slave via sysfs, the primary slave is only set once and it's not remembered in bond->params structure. Therefore the setting is lost after releasing the primary slave. This simple one-liner fixes this. Signed-off-by: Jiri Pirko <jpirko@redhat.com> -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html