Message ID | 1395350253-41886-1-git-send-email-tbberry@us.ibm.com |
---|---|
State | New |
Headers | show |
Hi, I was just wondering if anything else needed to be done to get this pushed upstream? Thanks, Tomo Tomohiro B Berry/Austin/IBM@IBMUS wrote on 03/20/2014 04:17:33 PM: > From: Tomohiro B Berry/Austin/IBM@IBMUS > To: qemu-devel@nongnu.org, > Cc: Tomohiro B Berry/Austin/IBM@IBMUS > Date: 03/20/2014 04:17 PM > Subject: [PATCH 1/1 V2] target-ppc: Adding Functionality to > rtas_ibm_get_system_parameter. > > This patch adds the functionality for > rtas_ibm_get_system_parameter to return a string containing > the values for partition_max_entitled_capacity and > system_potential_processors. > > Signed-off-by: Tomo Berry <tbberry@us.ibm.com> > --- > V1->V2: > changed memory allocation to glib calls > I'm not sure if this is meant for 2.1 or not > > hw/ppc/spapr_rtas.c | 32 ++++++++++++++++++++++++++++++++ > include/hw/ppc/spapr.h | 13 +++++++++++++ > 2 files changed, 45 insertions(+) > > diff --git a/hw/ppc/spapr_rtas.c b/hw/ppc/spapr_rtas.c > index 1cb276d..734ebc0 100644 > --- a/hw/ppc/spapr_rtas.c > +++ b/hw/ppc/spapr_rtas.c > @@ -225,6 +225,9 @@ static void rtas_stop_self(PowerPCCPU *cpu, > sPAPREnvironment *spapr, > } > > #define DIAGNOSTICS_RUN_MODE 42 > +#define SPLPAR_CHARACTERISTICS_TOKEN 20 > +#define CMO_CHARACTERISTICS_TOKEN 44 > +#define CEDE_LATENCY_TOKEN 45 > > static void rtas_ibm_get_system_parameter(PowerPCCPU *cpu, > sPAPREnvironment *spapr, > @@ -236,6 +239,7 @@ static void rtas_ibm_get_system_parameter(PowerPCCPU *cpu, > target_ulong buffer = rtas_ld(args, 1); > target_ulong length = rtas_ld(args, 2); > target_ulong ret = RTAS_OUT_NOT_SUPPORTED; > + char *local_buffer; > > switch (parameter) { > case DIAGNOSTICS_RUN_MODE: > @@ -244,6 +248,34 @@ static void rtas_ibm_get_system_parameter > (PowerPCCPU *cpu, > ret = RTAS_OUT_SUCCESS; > } > break; > + case SPLPAR_CHARACTERISTICS_TOKEN: > + > + /* Create a string of length bytes locally to copy to buffer */ > + > + local_buffer = g_malloc0(length); > + > + /* These are the current system parameters supported. The first > + * 16 bits of the buffer must contain the length of the string. > + * These 16 bits are not included in the length of the string. > + */ > + > + ((uint16_t *)local_buffer)[0] = cpu_to_be16(snprintf > (local_buffer + 2, > + length - 2, "MaxEntCap=%d,MaxPlatProcs=%d", max_cpus, > smp_cpus)); > + > + rtas_st_buffer(buffer, length, (uint8_t *)local_buffer); > + > + g_free(local_buffer); > + ret = RTAS_OUT_SUCCESS; > + break; > + case CMO_CHARACTERISTICS_TOKEN: > + ret = RTAS_OUT_NOT_SUPPORTED; > + break; > + case CEDE_LATENCY_TOKEN: > + ret = RTAS_OUT_NOT_SUPPORTED; > + break; > + default: > + ret = RTAS_OUT_NOT_SUPPORTED; > + break; > } > > rtas_st(rets, 0, ret); > diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h > index b2f11e9..bf5b528 100644 > --- a/include/hw/ppc/spapr.h > +++ b/include/hw/ppc/spapr.h > @@ -356,6 +356,19 @@ static inline void rtas_st(target_ulong phys, > int n, uint32_t val) > stl_be_phys(ppc64_phys_to_real(phys + 4*n), val); > } > > +/* This function will store a buffer 1 byte at a time into the > + * address at phys up to a maximum of phys_len bytes.*/ > + > +static inline void rtas_st_buffer(target_ulong phys, > + target_ulong phys_len, > + uint8_t *buffer) > +{ > + uint32_t i; > + for (i = 0; i < phys_len; i++) { > + stb_phys(ppc64_phys_to_real(phys + i), buffer[i]); > + } > +} > + > typedef void (*spapr_rtas_fn)(PowerPCCPU *cpu, sPAPREnvironment *spapr, > uint32_t token, > uint32_t nargs, target_ulong args, > -- > 1.8.3.1 >
On Thu, 17 Apr 2014 10:33:44 -0500 Tomohiro B Berry <tbberry@us.ibm.com> wrote: > Hi, > > I was just wondering if anything else needed to be done to get this pushed > upstream? > > Thanks, > > Tomo > Hi Tomo, A good start would be to also Cc: qemu-ppc@nongnu.org : this is mandatory for all PPC specific patches. Also, consider using the ./scripts/checkpatch.pl tool before sending patches: ERROR: trailing whitespace #50: FILE: hw/ppc/spapr_rtas.c:259: + * These 16 bits are not included in the length of the string. $ ERROR: trailing whitespace #86: FILE: include/hw/ppc/spapr.h:364: + uint8_t *buffer) $ total: 2 errors, 0 warnings, 69 lines checked > Tomohiro B Berry/Austin/IBM@IBMUS wrote on 03/20/2014 04:17:33 PM: > > > From: Tomohiro B Berry/Austin/IBM@IBMUS > > To: qemu-devel@nongnu.org, > > Cc: Tomohiro B Berry/Austin/IBM@IBMUS > > Date: 03/20/2014 04:17 PM > > Subject: [PATCH 1/1 V2] target-ppc: Adding Functionality to > > rtas_ibm_get_system_parameter. > > > > This patch adds the functionality for > > rtas_ibm_get_system_parameter to return a string containing > > the values for partition_max_entitled_capacity and > > system_potential_processors. > > > > Signed-off-by: Tomo Berry <tbberry@us.ibm.com> > > --- > > V1->V2: > > changed memory allocation to glib calls > > I'm not sure if this is meant for 2.1 or not > > > > hw/ppc/spapr_rtas.c | 32 ++++++++++++++++++++++++++++++++ > > include/hw/ppc/spapr.h | 13 +++++++++++++ > > 2 files changed, 45 insertions(+) > > > > diff --git a/hw/ppc/spapr_rtas.c b/hw/ppc/spapr_rtas.c > > index 1cb276d..734ebc0 100644 > > --- a/hw/ppc/spapr_rtas.c > > +++ b/hw/ppc/spapr_rtas.c > > @@ -225,6 +225,9 @@ static void rtas_stop_self(PowerPCCPU *cpu, > > sPAPREnvironment *spapr, > > } > > > > #define DIAGNOSTICS_RUN_MODE 42 > > +#define SPLPAR_CHARACTERISTICS_TOKEN 20 > > +#define CMO_CHARACTERISTICS_TOKEN 44 > > +#define CEDE_LATENCY_TOKEN 45 > > > > static void rtas_ibm_get_system_parameter(PowerPCCPU *cpu, > > sPAPREnvironment *spapr, > > @@ -236,6 +239,7 @@ static void rtas_ibm_get_system_parameter(PowerPCCPU > *cpu, > > target_ulong buffer = rtas_ld(args, 1); > > target_ulong length = rtas_ld(args, 2); > > target_ulong ret = RTAS_OUT_NOT_SUPPORTED; > > + char *local_buffer; > > > > switch (parameter) { > > case DIAGNOSTICS_RUN_MODE: > > @@ -244,6 +248,34 @@ static void rtas_ibm_get_system_parameter > > (PowerPCCPU *cpu, > > ret = RTAS_OUT_SUCCESS; > > } > > break; > > + case SPLPAR_CHARACTERISTICS_TOKEN: > > + > > + /* Create a string of length bytes locally to copy to buffer > */ > > + > > + local_buffer = g_malloc0(length); > > + > > + /* These are the current system parameters supported. The first s/system parameters supported/supported system parameters/ > > + * 16 bits of the buffer must contain the length of the string. > > + * These 16 bits are not included in the length of the string. > > + */ > > + > > + ((uint16_t *)local_buffer)[0] = cpu_to_be16(snprintf > > (local_buffer + 2, > > + length - 2, "MaxEntCap=%d,MaxPlatProcs=%d", max_cpus, > > smp_cpus)); > > + This would look nicer with a separate uint16_t variable for the buffer size. > > + rtas_st_buffer(buffer, length, (uint8_t *)local_buffer); > > + > > + g_free(local_buffer); > > + ret = RTAS_OUT_SUCCESS; > > + break; > > + case CMO_CHARACTERISTICS_TOKEN: > > + ret = RTAS_OUT_NOT_SUPPORTED; > > + break; > > + case CEDE_LATENCY_TOKEN: > > + ret = RTAS_OUT_NOT_SUPPORTED; > > + break; I'd say the above lines are useless... > > + default: > > + ret = RTAS_OUT_NOT_SUPPORTED; > > + break; > > } > > > > rtas_st(rets, 0, ret); > > diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h > > index b2f11e9..bf5b528 100644 > > --- a/include/hw/ppc/spapr.h > > +++ b/include/hw/ppc/spapr.h > > @@ -356,6 +356,19 @@ static inline void rtas_st(target_ulong phys, > > int n, uint32_t val) > > stl_be_phys(ppc64_phys_to_real(phys + 4*n), val); > > } > > > > +/* This function will store a buffer 1 byte at a time into the > > + * address at phys up to a maximum of phys_len bytes.*/ > > + > > +static inline void rtas_st_buffer(target_ulong phys, > > + target_ulong phys_len, > > + uint8_t *buffer) > > +{ > > + uint32_t i; > > + for (i = 0; i < phys_len; i++) { > > + stb_phys(ppc64_phys_to_real(phys + i), buffer[i]); > > + } > > +} > > + > > typedef void (*spapr_rtas_fn)(PowerPCCPU *cpu, sPAPREnvironment *spapr, > > uint32_t token, > > uint32_t nargs, target_ulong args, > > -- > > 1.8.3.1 > > Cheers.
diff --git a/hw/ppc/spapr_rtas.c b/hw/ppc/spapr_rtas.c index 1cb276d..734ebc0 100644 --- a/hw/ppc/spapr_rtas.c +++ b/hw/ppc/spapr_rtas.c @@ -225,6 +225,9 @@ static void rtas_stop_self(PowerPCCPU *cpu, sPAPREnvironment *spapr, } #define DIAGNOSTICS_RUN_MODE 42 +#define SPLPAR_CHARACTERISTICS_TOKEN 20 +#define CMO_CHARACTERISTICS_TOKEN 44 +#define CEDE_LATENCY_TOKEN 45 static void rtas_ibm_get_system_parameter(PowerPCCPU *cpu, sPAPREnvironment *spapr, @@ -236,6 +239,7 @@ static void rtas_ibm_get_system_parameter(PowerPCCPU *cpu, target_ulong buffer = rtas_ld(args, 1); target_ulong length = rtas_ld(args, 2); target_ulong ret = RTAS_OUT_NOT_SUPPORTED; + char *local_buffer; switch (parameter) { case DIAGNOSTICS_RUN_MODE: @@ -244,6 +248,34 @@ static void rtas_ibm_get_system_parameter(PowerPCCPU *cpu, ret = RTAS_OUT_SUCCESS; } break; + case SPLPAR_CHARACTERISTICS_TOKEN: + + /* Create a string of length bytes locally to copy to buffer */ + + local_buffer = g_malloc0(length); + + /* These are the current system parameters supported. The first + * 16 bits of the buffer must contain the length of the string. + * These 16 bits are not included in the length of the string. + */ + + ((uint16_t *)local_buffer)[0] = cpu_to_be16(snprintf(local_buffer + 2, + length - 2, "MaxEntCap=%d,MaxPlatProcs=%d", max_cpus, smp_cpus)); + + rtas_st_buffer(buffer, length, (uint8_t *)local_buffer); + + g_free(local_buffer); + ret = RTAS_OUT_SUCCESS; + break; + case CMO_CHARACTERISTICS_TOKEN: + ret = RTAS_OUT_NOT_SUPPORTED; + break; + case CEDE_LATENCY_TOKEN: + ret = RTAS_OUT_NOT_SUPPORTED; + break; + default: + ret = RTAS_OUT_NOT_SUPPORTED; + break; } rtas_st(rets, 0, ret); diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h index b2f11e9..bf5b528 100644 --- a/include/hw/ppc/spapr.h +++ b/include/hw/ppc/spapr.h @@ -356,6 +356,19 @@ static inline void rtas_st(target_ulong phys, int n, uint32_t val) stl_be_phys(ppc64_phys_to_real(phys + 4*n), val); } +/* This function will store a buffer 1 byte at a time into the + * address at phys up to a maximum of phys_len bytes.*/ + +static inline void rtas_st_buffer(target_ulong phys, + target_ulong phys_len, + uint8_t *buffer) +{ + uint32_t i; + for (i = 0; i < phys_len; i++) { + stb_phys(ppc64_phys_to_real(phys + i), buffer[i]); + } +} + typedef void (*spapr_rtas_fn)(PowerPCCPU *cpu, sPAPREnvironment *spapr, uint32_t token, uint32_t nargs, target_ulong args,
This patch adds the functionality for rtas_ibm_get_system_parameter to return a string containing the values for partition_max_entitled_capacity and system_potential_processors. Signed-off-by: Tomo Berry <tbberry@us.ibm.com> --- V1->V2: changed memory allocation to glib calls I'm not sure if this is meant for 2.1 or not hw/ppc/spapr_rtas.c | 32 ++++++++++++++++++++++++++++++++ include/hw/ppc/spapr.h | 13 +++++++++++++ 2 files changed, 45 insertions(+)