| Message ID | 1402543307-29800-2-git-send-email-iamjoonsoo.kim@lge.com |
|---|---|
| State | New, archived |
| Headers | show |
Joonsoo Kim <iamjoonsoo.kim@lge.com> writes: > We don't need explicit 'CMA:' prefix, since we already define prefix > 'cma:' in pr_fmt. So remove it. > > And, some logs print function name and others doesn't. This looks > bad to me, so I unify log format to print function name consistently. > > Lastly, I add one more debug log on cma_activate_area(). > > Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> > > diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c > index 83969f8..bd0bb81 100644 > --- a/drivers/base/dma-contiguous.c > +++ b/drivers/base/dma-contiguous.c > @@ -144,7 +144,7 @@ void __init dma_contiguous_reserve(phys_addr_t limit) > } > > if (selected_size && !dma_contiguous_default_area) { > - pr_debug("%s: reserving %ld MiB for global area\n", __func__, > + pr_debug("%s(): reserving %ld MiB for global area\n", __func__, > (unsigned long)selected_size / SZ_1M); Do we need to do function(), or just function:. I have seen the later usage in other parts of the kernel. > > dma_contiguous_reserve_area(selected_size, selected_base, > @@ -163,8 +163,9 @@ static int __init cma_activate_area(struct cma *cma) > unsigned i = cma->count >> pageblock_order; > struct zone *zone; > > - cma->bitmap = kzalloc(bitmap_size, GFP_KERNEL); > + pr_debug("%s()\n", __func__); why ? > > + cma->bitmap = kzalloc(bitmap_size, GFP_KERNEL); > if (!cma->bitmap) > return -ENOMEM; > > @@ -234,7 +235,8 @@ int __init dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base, > > /* Sanity checks */ > if (cma_area_count == ARRAY_SIZE(cma_areas)) { > - pr_err("Not enough slots for CMA reserved regions!\n"); > + pr_err("%s(): Not enough slots for CMA reserved regions!\n", > + __func__); > return -ENOSPC; > } > > @@ -274,14 +276,15 @@ int __init dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base, > *res_cma = cma; > cma_area_count++; > > - pr_info("CMA: reserved %ld MiB at %08lx\n", (unsigned long)size / SZ_1M, > - (unsigned long)base); > + pr_info("%s(): reserved %ld MiB at %08lx\n", > + __func__, (unsigned long)size / SZ_1M, (unsigned long)base); > > /* Architecture specific contiguous memory fixup. */ > dma_contiguous_early_fixup(base, size); > return 0; > err: > - pr_err("CMA: failed to reserve %ld MiB\n", (unsigned long)size / SZ_1M); > + pr_err("%s(): failed to reserve %ld MiB\n", > + __func__, (unsigned long)size / SZ_1M); > return ret; > } > > -- > 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Joonsoo, On Thu, Jun 12, 2014 at 12:21:38PM +0900, Joonsoo Kim wrote: > We don't need explicit 'CMA:' prefix, since we already define prefix > 'cma:' in pr_fmt. So remove it. > > And, some logs print function name and others doesn't. This looks > bad to me, so I unify log format to print function name consistently. > > Lastly, I add one more debug log on cma_activate_area(). When I take a look, it just indicates cma_activate_area was called or not, without what range for the area was reserved successfully so I couldn't see the intention for new message. Description should explain it so that everybody can agree on your claim. > > Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> > > diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c > index 83969f8..bd0bb81 100644 > --- a/drivers/base/dma-contiguous.c > +++ b/drivers/base/dma-contiguous.c > @@ -144,7 +144,7 @@ void __init dma_contiguous_reserve(phys_addr_t limit) > } > > if (selected_size && !dma_contiguous_default_area) { > - pr_debug("%s: reserving %ld MiB for global area\n", __func__, > + pr_debug("%s(): reserving %ld MiB for global area\n", __func__, > (unsigned long)selected_size / SZ_1M); > > dma_contiguous_reserve_area(selected_size, selected_base, > @@ -163,8 +163,9 @@ static int __init cma_activate_area(struct cma *cma) > unsigned i = cma->count >> pageblock_order; > struct zone *zone; > > - cma->bitmap = kzalloc(bitmap_size, GFP_KERNEL); > + pr_debug("%s()\n", __func__); > > + cma->bitmap = kzalloc(bitmap_size, GFP_KERNEL); > if (!cma->bitmap) > return -ENOMEM; > > @@ -234,7 +235,8 @@ int __init dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base, > > /* Sanity checks */ > if (cma_area_count == ARRAY_SIZE(cma_areas)) { > - pr_err("Not enough slots for CMA reserved regions!\n"); > + pr_err("%s(): Not enough slots for CMA reserved regions!\n", > + __func__); > return -ENOSPC; > } > > @@ -274,14 +276,15 @@ int __init dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base, > *res_cma = cma; > cma_area_count++; > > - pr_info("CMA: reserved %ld MiB at %08lx\n", (unsigned long)size / SZ_1M, > - (unsigned long)base); > + pr_info("%s(): reserved %ld MiB at %08lx\n", > + __func__, (unsigned long)size / SZ_1M, (unsigned long)base); > > /* Architecture specific contiguous memory fixup. */ > dma_contiguous_early_fixup(base, size); > return 0; > err: > - pr_err("CMA: failed to reserve %ld MiB\n", (unsigned long)size / SZ_1M); > + pr_err("%s(): failed to reserve %ld MiB\n", > + __func__, (unsigned long)size / SZ_1M); > return ret; > } > > -- > 1.7.9.5
On Thu, Jun 12, 2014 at 10:11:19AM +0530, Aneesh Kumar K.V wrote: > Joonsoo Kim <iamjoonsoo.kim@lge.com> writes: > > > We don't need explicit 'CMA:' prefix, since we already define prefix > > 'cma:' in pr_fmt. So remove it. > > > > And, some logs print function name and others doesn't. This looks > > bad to me, so I unify log format to print function name consistently. > > > > Lastly, I add one more debug log on cma_activate_area(). > > > > Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> > > > > diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c > > index 83969f8..bd0bb81 100644 > > --- a/drivers/base/dma-contiguous.c > > +++ b/drivers/base/dma-contiguous.c > > @@ -144,7 +144,7 @@ void __init dma_contiguous_reserve(phys_addr_t limit) > > } > > > > if (selected_size && !dma_contiguous_default_area) { > > - pr_debug("%s: reserving %ld MiB for global area\n", __func__, > > + pr_debug("%s(): reserving %ld MiB for global area\n", __func__, > > (unsigned long)selected_size / SZ_1M); > > Do we need to do function(), or just function:. I have seen the later > usage in other parts of the kernel. Hello, I also haven't seen this format in other kernel code, but, in cma, they use this format as following. function(arg1, arg2, ...): some message If we all dislike this format, we can change it after merging this patchset. Until then, it seems better to me to leave it as is. > > > > > dma_contiguous_reserve_area(selected_size, selected_base, > > @@ -163,8 +163,9 @@ static int __init cma_activate_area(struct cma *cma) > > unsigned i = cma->count >> pageblock_order; > > struct zone *zone; > > > > - cma->bitmap = kzalloc(bitmap_size, GFP_KERNEL); > > + pr_debug("%s()\n", __func__); > > why ? > This pr_debug() comes from ppc kvm's kvm_cma_init_reserved_areas(). I want to maintain all log messages as much as possible to reduce confusion with this generalization. Thanks. -- To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jun 12, 2014 at 02:18:53PM +0900, Minchan Kim wrote: > Hi Joonsoo, > > On Thu, Jun 12, 2014 at 12:21:38PM +0900, Joonsoo Kim wrote: > > We don't need explicit 'CMA:' prefix, since we already define prefix > > 'cma:' in pr_fmt. So remove it. > > > > And, some logs print function name and others doesn't. This looks > > bad to me, so I unify log format to print function name consistently. > > > > Lastly, I add one more debug log on cma_activate_area(). > > When I take a look, it just indicates cma_activate_area was called or not, > without what range for the area was reserved successfully so I couldn't see > the intention for new message. Description should explain it so that everybody > can agree on your claim. > Hello, I paste the answer in other thread. This pr_debug() comes from ppc kvm's kvm_cma_init_reserved_areas(). I want to maintain all log messages as much as possible to reduce confusion with this generalization. If I need to respin this patchset, I will explain more about it. Thanks. -- To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 06/12/2014 11:21 AM, Joonsoo Kim wrote: > We don't need explicit 'CMA:' prefix, since we already define prefix > 'cma:' in pr_fmt. So remove it. > > And, some logs print function name and others doesn't. This looks > bad to me, so I unify log format to print function name consistently. > > Lastly, I add one more debug log on cma_activate_area(). > > Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> > > diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c > index 83969f8..bd0bb81 100644 > --- a/drivers/base/dma-contiguous.c > +++ b/drivers/base/dma-contiguous.c > @@ -144,7 +144,7 @@ void __init dma_contiguous_reserve(phys_addr_t limit) > } > > if (selected_size && !dma_contiguous_default_area) { > - pr_debug("%s: reserving %ld MiB for global area\n", __func__, > + pr_debug("%s(): reserving %ld MiB for global area\n", __func__, > (unsigned long)selected_size / SZ_1M); > > dma_contiguous_reserve_area(selected_size, selected_base, > @@ -163,8 +163,9 @@ static int __init cma_activate_area(struct cma *cma) > unsigned i = cma->count >> pageblock_order; > struct zone *zone; > > - cma->bitmap = kzalloc(bitmap_size, GFP_KERNEL); > + pr_debug("%s()\n", __func__); > > + cma->bitmap = kzalloc(bitmap_size, GFP_KERNEL); > if (!cma->bitmap) > return -ENOMEM; > > @@ -234,7 +235,8 @@ int __init dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base, > > /* Sanity checks */ > if (cma_area_count == ARRAY_SIZE(cma_areas)) { > - pr_err("Not enough slots for CMA reserved regions!\n"); > + pr_err("%s(): Not enough slots for CMA reserved regions!\n", > + __func__); > return -ENOSPC; > } > > @@ -274,14 +276,15 @@ int __init dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base, > *res_cma = cma; > cma_area_count++; > > - pr_info("CMA: reserved %ld MiB at %08lx\n", (unsigned long)size / SZ_1M, > - (unsigned long)base); > + pr_info("%s(): reserved %ld MiB at %08lx\n", > + __func__, (unsigned long)size / SZ_1M, (unsigned long)base); > > /* Architecture specific contiguous memory fixup. */ > dma_contiguous_early_fixup(base, size); > return 0; > err: > - pr_err("CMA: failed to reserve %ld MiB\n", (unsigned long)size / SZ_1M); > + pr_err("%s(): failed to reserve %ld MiB\n", > + __func__, (unsigned long)size / SZ_1M); > return ret; > } > >
>> Joonsoo Kim <iamjoonsoo.kim@lge.com> writes: >> >> > We don't need explicit 'CMA:' prefix, since we already define prefix >> > 'cma:' in pr_fmt. So remove it. >> > >> > And, some logs print function name and others doesn't. This looks >> > bad to me, so I unify log format to print function name consistently. >> > >> > Lastly, I add one more debug log on cma_activate_area(). >> > >> > Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> >> > >> > diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c >> > index 83969f8..bd0bb81 100644 >> > --- a/drivers/base/dma-contiguous.c >> > +++ b/drivers/base/dma-contiguous.c >> > @@ -144,7 +144,7 @@ void __init dma_contiguous_reserve(phys_addr_t limit) >> > } >> > >> > if (selected_size && !dma_contiguous_default_area) { >> > - pr_debug("%s: reserving %ld MiB for global area\n", __func__, >> > + pr_debug("%s(): reserving %ld MiB for global area\n", __func__, >> > (unsigned long)selected_size / SZ_1M); > On Thu, Jun 12, 2014 at 10:11:19AM +0530, Aneesh Kumar K.V wrote: >> Do we need to do function(), or just function:. I have seen the later >> usage in other parts of the kernel. On Thu, Jun 12 2014, Joonsoo Kim <iamjoonsoo.kim@lge.com> wrote: > I also haven't seen this format in other kernel code, but, in cma, they use > this format as following. > > function(arg1, arg2, ...): some message > > If we all dislike this format, we can change it after merging this > patchset. Until then, it seems better to me to leave it as is. I used “function(arg1, arg2, …)” at the *beginning* of functions when the arguments passed to the function were included in the message. In all other cases I left it at just “function:” (or just no additional prefix). IMO that's a reasonable strategy.
On Thu, Jun 12 2014, Joonsoo Kim <iamjoonsoo.kim@lge.com> wrote: > We don't need explicit 'CMA:' prefix, since we already define prefix > 'cma:' in pr_fmt. So remove it. > > And, some logs print function name and others doesn't. This looks > bad to me, so I unify log format to print function name consistently. > > Lastly, I add one more debug log on cma_activate_area(). I don't particularly care what format of logs you choose, so: Acked-by: Michal Nazarewicz <mina86@mina86.com> even though I'd go without empty “()”. > Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> > > diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c > index 83969f8..bd0bb81 100644 > --- a/drivers/base/dma-contiguous.c > +++ b/drivers/base/dma-contiguous.c > @@ -144,7 +144,7 @@ void __init dma_contiguous_reserve(phys_addr_t limit) > } > > if (selected_size && !dma_contiguous_default_area) { > - pr_debug("%s: reserving %ld MiB for global area\n", __func__, > + pr_debug("%s(): reserving %ld MiB for global area\n", __func__, > (unsigned long)selected_size / SZ_1M); > > dma_contiguous_reserve_area(selected_size, selected_base, > @@ -163,8 +163,9 @@ static int __init cma_activate_area(struct cma *cma) > unsigned i = cma->count >> pageblock_order; > struct zone *zone; > > - cma->bitmap = kzalloc(bitmap_size, GFP_KERNEL); > + pr_debug("%s()\n", __func__); > > + cma->bitmap = kzalloc(bitmap_size, GFP_KERNEL); > if (!cma->bitmap) > return -ENOMEM; > > @@ -234,7 +235,8 @@ int __init dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base, > > /* Sanity checks */ > if (cma_area_count == ARRAY_SIZE(cma_areas)) { > - pr_err("Not enough slots for CMA reserved regions!\n"); > + pr_err("%s(): Not enough slots for CMA reserved regions!\n", > + __func__); > return -ENOSPC; > } > > @@ -274,14 +276,15 @@ int __init dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base, > *res_cma = cma; > cma_area_count++; > > - pr_info("CMA: reserved %ld MiB at %08lx\n", (unsigned long)size / SZ_1M, > - (unsigned long)base); > + pr_info("%s(): reserved %ld MiB at %08lx\n", > + __func__, (unsigned long)size / SZ_1M, (unsigned long)base); > > /* Architecture specific contiguous memory fixup. */ > dma_contiguous_early_fixup(base, size); > return 0; > err: > - pr_err("CMA: failed to reserve %ld MiB\n", (unsigned long)size / SZ_1M); > + pr_err("%s(): failed to reserve %ld MiB\n", > + __func__, (unsigned long)size / SZ_1M); > return ret; > }
On Thu, Jun 12 2014, Michal Nazarewicz <mina86@mina86.com> wrote: > I used “function(arg1, arg2, …)” at the *beginning* of functions when > the arguments passed to the function were included in the message. In > all other cases I left it at just “function:” (or just no additional > prefix). IMO that's a reasonable strategy. At closer inspection, I realised drivers/base/dma-contiguous.c is Marek's code, but the above I think is still reasonable thing to do, so I'd rather standardise on having “function(…)” only at the beginning of a function. Just my 0.02 CHF.
On Thu, Jun 12, 2014 at 11:53:16AM +0200, Michal Nazarewicz wrote: > On Thu, Jun 12 2014, Michal Nazarewicz <mina86@mina86.com> wrote: > > I used “function(arg1, arg2, …)” at the *beginning* of functions when > > the arguments passed to the function were included in the message. In > > all other cases I left it at just “function:” (or just no additional > > prefix). IMO that's a reasonable strategy. > > At closer inspection, I realised drivers/base/dma-contiguous.c is > Marek's code, but the above I think is still reasonable thing to do, so > I'd rather standardise on having “function(…)” only at the beginning of > a function. Just my 0.02 CHF. Hello, Now, I realize that these changes aren't needed in this patchset, so I simplify this patch just to remove redundant 'CMA' prefix. Other things can be done after merging if we need. Thanks. -- To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c index 83969f8..bd0bb81 100644 --- a/drivers/base/dma-contiguous.c +++ b/drivers/base/dma-contiguous.c @@ -144,7 +144,7 @@ void __init dma_contiguous_reserve(phys_addr_t limit) } if (selected_size && !dma_contiguous_default_area) { - pr_debug("%s: reserving %ld MiB for global area\n", __func__, + pr_debug("%s(): reserving %ld MiB for global area\n", __func__, (unsigned long)selected_size / SZ_1M); dma_contiguous_reserve_area(selected_size, selected_base, @@ -163,8 +163,9 @@ static int __init cma_activate_area(struct cma *cma) unsigned i = cma->count >> pageblock_order; struct zone *zone; - cma->bitmap = kzalloc(bitmap_size, GFP_KERNEL); + pr_debug("%s()\n", __func__); + cma->bitmap = kzalloc(bitmap_size, GFP_KERNEL); if (!cma->bitmap) return -ENOMEM; @@ -234,7 +235,8 @@ int __init dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base, /* Sanity checks */ if (cma_area_count == ARRAY_SIZE(cma_areas)) { - pr_err("Not enough slots for CMA reserved regions!\n"); + pr_err("%s(): Not enough slots for CMA reserved regions!\n", + __func__); return -ENOSPC; } @@ -274,14 +276,15 @@ int __init dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base, *res_cma = cma; cma_area_count++; - pr_info("CMA: reserved %ld MiB at %08lx\n", (unsigned long)size / SZ_1M, - (unsigned long)base); + pr_info("%s(): reserved %ld MiB at %08lx\n", + __func__, (unsigned long)size / SZ_1M, (unsigned long)base); /* Architecture specific contiguous memory fixup. */ dma_contiguous_early_fixup(base, size); return 0; err: - pr_err("CMA: failed to reserve %ld MiB\n", (unsigned long)size / SZ_1M); + pr_err("%s(): failed to reserve %ld MiB\n", + __func__, (unsigned long)size / SZ_1M); return ret; }
We don't need explicit 'CMA:' prefix, since we already define prefix 'cma:' in pr_fmt. So remove it. And, some logs print function name and others doesn't. This looks bad to me, so I unify log format to print function name consistently. Lastly, I add one more debug log on cma_activate_area(). Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>