| Message ID | 1402543307-29800-10-git-send-email-iamjoonsoo.kim@lge.com |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Jun 12, 2014 at 12:21:46PM +0900, Joonsoo Kim wrote: > Conventionally, we put output param to the end of param list. > cma_declare_contiguous() doesn't look like that, so change it. If you says "Conventionally", I'd like to suggest one more thing. Conventionally, we put 'base' ahead 'size' but dma_contiguous_reserve_area is opposite. > > Additionally, move down cma_areas reference code to the position > where it is really needed. > > Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> > > diff --git a/arch/powerpc/kvm/book3s_hv_builtin.c b/arch/powerpc/kvm/book3s_hv_builtin.c > index 28ec226..97613ea 100644 > --- a/arch/powerpc/kvm/book3s_hv_builtin.c > +++ b/arch/powerpc/kvm/book3s_hv_builtin.c > @@ -184,7 +184,7 @@ void __init kvm_cma_reserve(void) > > align_size = max(kvm_rma_pages << PAGE_SHIFT, align_size); > cma_declare_contiguous(selected_size, 0, 0, align_size, > - KVM_CMA_CHUNK_ORDER - PAGE_SHIFT, &kvm_cma, false); > + KVM_CMA_CHUNK_ORDER - PAGE_SHIFT, false, &kvm_cma); > } > } > > diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c > index f177f73..bfd4553 100644 > --- a/drivers/base/dma-contiguous.c > +++ b/drivers/base/dma-contiguous.c > @@ -149,7 +149,7 @@ int __init dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base, > { > int ret; > > - ret = cma_declare_contiguous(size, base, limit, 0, 0, res_cma, fixed); > + ret = cma_declare_contiguous(size, base, limit, 0, 0, fixed, res_cma); > if (ret) > return ret; > > diff --git a/include/linux/cma.h b/include/linux/cma.h > index e38efe9..e53eead 100644 > --- a/include/linux/cma.h > +++ b/include/linux/cma.h > @@ -6,7 +6,7 @@ struct cma; > extern int __init cma_declare_contiguous(phys_addr_t size, > phys_addr_t base, phys_addr_t limit, > phys_addr_t alignment, int order_per_bit, > - struct cma **res_cma, bool fixed); > + bool fixed, struct cma **res_cma); > extern struct page *cma_alloc(struct cma *cma, int count, unsigned int align); > extern bool cma_release(struct cma *cma, struct page *pages, int count); > #endif > diff --git a/mm/cma.c b/mm/cma.c > index 01a0713..22a5b23 100644 > --- a/mm/cma.c > +++ b/mm/cma.c > @@ -142,8 +142,8 @@ core_initcall(cma_init_reserved_areas); > * @limit: End address of the reserved memory (optional, 0 for any). > * @alignment: Alignment for the contiguous memory area, should be power of 2 > * @order_per_bit: Order of pages represented by one bit on bitmap. > - * @res_cma: Pointer to store the created cma region. > * @fixed: hint about where to place the reserved area > + * @res_cma: Pointer to store the created cma region. > * > * This function reserves memory from early allocator. It should be > * called by arch specific code once the early allocator (memblock or bootmem) > @@ -156,9 +156,9 @@ core_initcall(cma_init_reserved_areas); > int __init cma_declare_contiguous(phys_addr_t size, > phys_addr_t base, phys_addr_t limit, > phys_addr_t alignment, int order_per_bit, > - struct cma **res_cma, bool fixed) > + bool fixed, struct cma **res_cma) > { > - struct cma *cma = &cma_areas[cma_area_count]; > + struct cma *cma; > int ret = 0; > > pr_debug("%s(size %lx, base %08lx, limit %08lx alignment %08lx)\n", > @@ -214,6 +214,7 @@ int __init cma_declare_contiguous(phys_addr_t size, > * Each reserved area must be initialised later, when more kernel > * subsystems (like slab allocator) are available. > */ > + cma = &cma_areas[cma_area_count]; > cma->base_pfn = PFN_DOWN(base); > cma->count = size >> PAGE_SHIFT; > cma->order_per_bit = order_per_bit; > -- > 1.7.9.5
On Thu, Jun 12, 2014 at 04:19:31PM +0900, Minchan Kim wrote: > On Thu, Jun 12, 2014 at 12:21:46PM +0900, Joonsoo Kim wrote: > > Conventionally, we put output param to the end of param list. > > cma_declare_contiguous() doesn't look like that, so change it. > > If you says "Conventionally", I'd like to suggest one more thing. > Conventionally, we put 'base' ahead 'size' but dma_contiguous_reserve_area > is opposite. Okay. I will do it. :) Thanks. -- To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jun 12 2014, Joonsoo Kim <iamjoonsoo.kim@lge.com> wrote: > Conventionally, we put output param to the end of param list. > cma_declare_contiguous() doesn't look like that, so change it. Perhaps the function should be changed to return an error-pointer? > Additionally, move down cma_areas reference code to the position > where it is really needed. > > Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> > > diff --git a/arch/powerpc/kvm/book3s_hv_builtin.c b/arch/powerpc/kvm/book3s_hv_builtin.c > index 28ec226..97613ea 100644 > --- a/arch/powerpc/kvm/book3s_hv_builtin.c > +++ b/arch/powerpc/kvm/book3s_hv_builtin.c > @@ -184,7 +184,7 @@ void __init kvm_cma_reserve(void) > > align_size = max(kvm_rma_pages << PAGE_SHIFT, align_size); > cma_declare_contiguous(selected_size, 0, 0, align_size, > - KVM_CMA_CHUNK_ORDER - PAGE_SHIFT, &kvm_cma, false); > + KVM_CMA_CHUNK_ORDER - PAGE_SHIFT, false, &kvm_cma); > } > } > > diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c > index f177f73..bfd4553 100644 > --- a/drivers/base/dma-contiguous.c > +++ b/drivers/base/dma-contiguous.c > @@ -149,7 +149,7 @@ int __init dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base, > { > int ret; > > - ret = cma_declare_contiguous(size, base, limit, 0, 0, res_cma, fixed); > + ret = cma_declare_contiguous(size, base, limit, 0, 0, fixed, res_cma); > if (ret) > return ret; > > diff --git a/include/linux/cma.h b/include/linux/cma.h > index e38efe9..e53eead 100644 > --- a/include/linux/cma.h > +++ b/include/linux/cma.h > @@ -6,7 +6,7 @@ struct cma; > extern int __init cma_declare_contiguous(phys_addr_t size, > phys_addr_t base, phys_addr_t limit, > phys_addr_t alignment, int order_per_bit, > - struct cma **res_cma, bool fixed); > + bool fixed, struct cma **res_cma); > extern struct page *cma_alloc(struct cma *cma, int count, unsigned int align); > extern bool cma_release(struct cma *cma, struct page *pages, int count); > #endif > diff --git a/mm/cma.c b/mm/cma.c > index 01a0713..22a5b23 100644 > --- a/mm/cma.c > +++ b/mm/cma.c > @@ -142,8 +142,8 @@ core_initcall(cma_init_reserved_areas); > * @limit: End address of the reserved memory (optional, 0 for any). > * @alignment: Alignment for the contiguous memory area, should be power of 2 > * @order_per_bit: Order of pages represented by one bit on bitmap. > - * @res_cma: Pointer to store the created cma region. > * @fixed: hint about where to place the reserved area > + * @res_cma: Pointer to store the created cma region. > * > * This function reserves memory from early allocator. It should be > * called by arch specific code once the early allocator (memblock or bootmem) > @@ -156,9 +156,9 @@ core_initcall(cma_init_reserved_areas); > int __init cma_declare_contiguous(phys_addr_t size, > phys_addr_t base, phys_addr_t limit, > phys_addr_t alignment, int order_per_bit, > - struct cma **res_cma, bool fixed) > + bool fixed, struct cma **res_cma) > { > - struct cma *cma = &cma_areas[cma_area_count]; > + struct cma *cma; > int ret = 0; > > pr_debug("%s(size %lx, base %08lx, limit %08lx alignment %08lx)\n", > @@ -214,6 +214,7 @@ int __init cma_declare_contiguous(phys_addr_t size, > * Each reserved area must be initialised later, when more kernel > * subsystems (like slab allocator) are available. > */ > + cma = &cma_areas[cma_area_count]; > cma->base_pfn = PFN_DOWN(base); > cma->count = size >> PAGE_SHIFT; > cma->order_per_bit = order_per_bit; > -- > 1.7.9.5 >
Joonsoo Kim <iamjoonsoo.kim@lge.com> writes: > Conventionally, we put output param to the end of param list. > cma_declare_contiguous() doesn't look like that, so change it. > > Additionally, move down cma_areas reference code to the position > where it is really needed. > > Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> > > diff --git a/arch/powerpc/kvm/book3s_hv_builtin.c b/arch/powerpc/kvm/book3s_hv_builtin.c > index 28ec226..97613ea 100644 > --- a/arch/powerpc/kvm/book3s_hv_builtin.c > +++ b/arch/powerpc/kvm/book3s_hv_builtin.c > @@ -184,7 +184,7 @@ void __init kvm_cma_reserve(void) > > align_size = max(kvm_rma_pages << PAGE_SHIFT, align_size); > cma_declare_contiguous(selected_size, 0, 0, align_size, > - KVM_CMA_CHUNK_ORDER - PAGE_SHIFT, &kvm_cma, false); > + KVM_CMA_CHUNK_ORDER - PAGE_SHIFT, false, &kvm_cma); > } > } > > diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c > index f177f73..bfd4553 100644 > --- a/drivers/base/dma-contiguous.c > +++ b/drivers/base/dma-contiguous.c > @@ -149,7 +149,7 @@ int __init dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base, > { > int ret; > > - ret = cma_declare_contiguous(size, base, limit, 0, 0, res_cma, fixed); > + ret = cma_declare_contiguous(size, base, limit, 0, 0, fixed, res_cma); > if (ret) > return ret; > > diff --git a/include/linux/cma.h b/include/linux/cma.h > index e38efe9..e53eead 100644 > --- a/include/linux/cma.h > +++ b/include/linux/cma.h > @@ -6,7 +6,7 @@ struct cma; > extern int __init cma_declare_contiguous(phys_addr_t size, > phys_addr_t base, phys_addr_t limit, > phys_addr_t alignment, int order_per_bit, > - struct cma **res_cma, bool fixed); > + bool fixed, struct cma **res_cma); > extern struct page *cma_alloc(struct cma *cma, int count, unsigned int align); > extern bool cma_release(struct cma *cma, struct page *pages, int count); > #endif > diff --git a/mm/cma.c b/mm/cma.c > index 01a0713..22a5b23 100644 > --- a/mm/cma.c > +++ b/mm/cma.c > @@ -142,8 +142,8 @@ core_initcall(cma_init_reserved_areas); > * @limit: End address of the reserved memory (optional, 0 for any). > * @alignment: Alignment for the contiguous memory area, should be power of 2 > * @order_per_bit: Order of pages represented by one bit on bitmap. > - * @res_cma: Pointer to store the created cma region. > * @fixed: hint about where to place the reserved area > + * @res_cma: Pointer to store the created cma region. > * > * This function reserves memory from early allocator. It should be > * called by arch specific code once the early allocator (memblock or bootmem) > @@ -156,9 +156,9 @@ core_initcall(cma_init_reserved_areas); > int __init cma_declare_contiguous(phys_addr_t size, > phys_addr_t base, phys_addr_t limit, > phys_addr_t alignment, int order_per_bit, > - struct cma **res_cma, bool fixed) > + bool fixed, struct cma **res_cma) > { > - struct cma *cma = &cma_areas[cma_area_count]; > + struct cma *cma; > int ret = 0; > > pr_debug("%s(size %lx, base %08lx, limit %08lx alignment %08lx)\n", > @@ -214,6 +214,7 @@ int __init cma_declare_contiguous(phys_addr_t size, > * Each reserved area must be initialised later, when more kernel > * subsystems (like slab allocator) are available. > */ > + cma = &cma_areas[cma_area_count]; > cma->base_pfn = PFN_DOWN(base); > cma->count = size >> PAGE_SHIFT; > cma->order_per_bit = order_per_bit; > -- > 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/powerpc/kvm/book3s_hv_builtin.c b/arch/powerpc/kvm/book3s_hv_builtin.c index 28ec226..97613ea 100644 --- a/arch/powerpc/kvm/book3s_hv_builtin.c +++ b/arch/powerpc/kvm/book3s_hv_builtin.c @@ -184,7 +184,7 @@ void __init kvm_cma_reserve(void) align_size = max(kvm_rma_pages << PAGE_SHIFT, align_size); cma_declare_contiguous(selected_size, 0, 0, align_size, - KVM_CMA_CHUNK_ORDER - PAGE_SHIFT, &kvm_cma, false); + KVM_CMA_CHUNK_ORDER - PAGE_SHIFT, false, &kvm_cma); } } diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c index f177f73..bfd4553 100644 --- a/drivers/base/dma-contiguous.c +++ b/drivers/base/dma-contiguous.c @@ -149,7 +149,7 @@ int __init dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base, { int ret; - ret = cma_declare_contiguous(size, base, limit, 0, 0, res_cma, fixed); + ret = cma_declare_contiguous(size, base, limit, 0, 0, fixed, res_cma); if (ret) return ret; diff --git a/include/linux/cma.h b/include/linux/cma.h index e38efe9..e53eead 100644 --- a/include/linux/cma.h +++ b/include/linux/cma.h @@ -6,7 +6,7 @@ struct cma; extern int __init cma_declare_contiguous(phys_addr_t size, phys_addr_t base, phys_addr_t limit, phys_addr_t alignment, int order_per_bit, - struct cma **res_cma, bool fixed); + bool fixed, struct cma **res_cma); extern struct page *cma_alloc(struct cma *cma, int count, unsigned int align); extern bool cma_release(struct cma *cma, struct page *pages, int count); #endif diff --git a/mm/cma.c b/mm/cma.c index 01a0713..22a5b23 100644 --- a/mm/cma.c +++ b/mm/cma.c @@ -142,8 +142,8 @@ core_initcall(cma_init_reserved_areas); * @limit: End address of the reserved memory (optional, 0 for any). * @alignment: Alignment for the contiguous memory area, should be power of 2 * @order_per_bit: Order of pages represented by one bit on bitmap. - * @res_cma: Pointer to store the created cma region. * @fixed: hint about where to place the reserved area + * @res_cma: Pointer to store the created cma region. * * This function reserves memory from early allocator. It should be * called by arch specific code once the early allocator (memblock or bootmem) @@ -156,9 +156,9 @@ core_initcall(cma_init_reserved_areas); int __init cma_declare_contiguous(phys_addr_t size, phys_addr_t base, phys_addr_t limit, phys_addr_t alignment, int order_per_bit, - struct cma **res_cma, bool fixed) + bool fixed, struct cma **res_cma) { - struct cma *cma = &cma_areas[cma_area_count]; + struct cma *cma; int ret = 0; pr_debug("%s(size %lx, base %08lx, limit %08lx alignment %08lx)\n", @@ -214,6 +214,7 @@ int __init cma_declare_contiguous(phys_addr_t size, * Each reserved area must be initialised later, when more kernel * subsystems (like slab allocator) are available. */ + cma = &cma_areas[cma_area_count]; cma->base_pfn = PFN_DOWN(base); cma->count = size >> PAGE_SHIFT; cma->order_per_bit = order_per_bit;
Conventionally, we put output param to the end of param list. cma_declare_contiguous() doesn't look like that, so change it. Additionally, move down cma_areas reference code to the position where it is really needed. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>