| Message ID | 1402019242-15521-1-git-send-email-vapier@gentoo.org |
|---|---|
| State | New |
| Headers | show |
On 06/05/2014 07:47 PM, Mike Frysinger wrote: > The current script isn't terribly friendly -- you basically get one chance > to run it per boot w/out manually recovering the system state. > > It also doesn't lend itself to being made into an init script w/out a lot > of manual editing. > > Rewrite the sucker with proper functions so that people can easily run it > and integrate into their system, and make it easier for CPU maintainers > to add new targets. > > There's also a few fixes smattered about, but considering the whole file > has been written from scratch, not sure they need splitting out. > > Signed-off-by: Mike Frysinger <vapier@gentoo.org> > --- > scripts/qemu-binfmt-conf.sh | 306 ++++++++++++++++++++++++++++++++++---------- > 1 file changed, 240 insertions(+), 66 deletions(-) > mode change 100644 => 100755 scripts/qemu-binfmt-conf.sh > +++ b/scripts/qemu-binfmt-conf.sh > @@ -1,72 +1,246 @@ > #!/bin/sh No copyright or license notice? > + > +usage() { > + local ret="${1:-0}" 'local' is a bashism, not compatible with /bin/sh of dash on Debian based systems. > + > +# Usage: has <needle> <list of haystack items> > +# See if <needle> can be found in <haystack>. > +has() { > + local needle="$1" and again (I'll quit pointing it out) > +# Make sure the binfmt_misc filesystem is ready for us to use. > +BINFMT_MISC="/proc/sys/fs/binfmt_misc" > +binfmt_init() { > + if ${dryrun}; then > + return 0 > + fi > + if [ ! -d ${BINFMT_MISC} ]; then Underquoted. Just because $BINFMT_MISC currently happens to not need quoting based on the definition 5 lines above shouldn't give you the excuse to get lazy. > + modprobe binfmt_misc > + fi > + if [ ! -f ${BINFMT_MISC}/register ]; then Underquoted. > + mount binfmt_misc -t binfmt_misc ${BINFMT_MISC} Underquoted. > +# Register the specified magic. > +register() { > + local fmt="$1" > + local arch="$2" > + local path="$(find_qemu "${arch}")" > + local magic=":${arch}:${fmt}:${path}:" > + > + unregister "$@" > + > + if [ -z "${path}" ]; then > + echo "${arch}: Could not locate a qemu binary" > + else > + decho "${arch}: would register using ${path}" > + decho "${arch}: echo '${magic}' > ${BINFMT_MISC}/register" > + if ! ${dryrun}; then > + if ! echo "${magic}" > ${BINFMT_MISC}/register; then Underquoted.
On 6 June 2014 02:47, Mike Frysinger <vapier@gentoo.org> wrote: > The current script isn't terribly friendly -- you basically get one chance > to run it per boot w/out manually recovering the system state. > > It also doesn't lend itself to being made into an init script w/out a lot > of manual editing. > > Rewrite the sucker with proper functions so that people can easily run it > and integrate into their system, and make it easier for CPU maintainers > to add new targets. > > There's also a few fixes smattered about, but considering the whole file > has been written from scratch, not sure they need splitting out. Personally I think we should (a) ship update-binfmts format files (b) encourage distros to use update-binfmts to manage format files rather than writing directly to /proc (c) provide a simple "only handles install" script that can read the format files, for people who really want to just blast stuff into /proc I think a single standalone script is pretty useless for most people. thanks -- PMM
Mike Frysinger writes: > The current script isn't terribly friendly -- you basically get one chance > to run it per boot w/out manually recovering the system state. See also the discussion for: https://patches.linaro.org/22974/ I think there is at least one other patch that was suggested that I never tracked down. > It also doesn't lend itself to being made into an init script w/out a lot > of manual editing. > > Rewrite the sucker with proper functions so that people can easily run it > and integrate into their system, and make it easier for CPU maintainers > to add new targets. Given that every distro seems to be it's own special snowflake when it comes to configuring binfmt misc it might be worthwhile splitting the data out so it can be more easily incorporated into what downstream system the distro have. FWIW I had my stab at this because as a developer I need something outside of the distro defaults when setting up tests. I suspect devs are the main target for the script we ship. > > There's also a few fixes smattered about, but considering the whole file > has been written from scratch, not sure they need splitting out. > > Signed-off-by: Mike Frysinger <vapier@gentoo.org> > --- > scripts/qemu-binfmt-conf.sh | 306 ++++++++++++++++++++++++++++++++++---------- > 1 file changed, 240 insertions(+), 66 deletions(-) > mode change 100644 => 100755 scripts/qemu-binfmt-conf.sh > > diff --git a/scripts/qemu-binfmt-conf.sh b/scripts/qemu-binfmt-conf.sh > old mode 100644 > new mode 100755 > index 289b1a3..59de1d2 > --- a/scripts/qemu-binfmt-conf.sh > +++ b/scripts/qemu-binfmt-conf.sh > @@ -1,72 +1,246 @@ > #!/bin/sh > -# enable automatic i386/ARM/M68K/MIPS/SPARC/PPC/s390 program execution by the kernel > - > -# load the binfmt_misc module > -if [ ! -d /proc/sys/fs/binfmt_misc ]; then > - /sbin/modprobe binfmt_misc > -fi > -if [ ! -f /proc/sys/fs/binfmt_misc/register ]; then > - mount binfmt_misc -t binfmt_misc /proc/sys/fs/binfmt_misc > -fi > - > -# probe cpu type > -cpu=`uname -m` > -case "$cpu" in > - i386|i486|i586|i686|i86pc|BePC|x86_64) > +# Enable automatic execution of non-native ELFs by the kernel. > + > +set -e > + > +usage() { > + local ret="${1:-0}" > + [ ${ret} -eq 0 ] || exec 1>&2 > + cat <<-EOF > +Usage: $0 [options] [targets to process] > + > +Enable automatic execution of non-native ELFs by the kernel by > +initializing the binfmt_misc filesystem. > + > +Options: > + -r Register qemu targets [default] > + -u Unregister qemu targets > + -n Dry run mode; don't actually try to do stuff > + -h This screen > +EOF > + exit ${ret} > +} > + > +# Usage: error <message> > +error() { > + echo "ERROR: $*" >&2 > +} > + > +# Usage: die <message> > +die() { > + error "$*" > + exit 1 > +} > + > +# Usage: decho <message> > +# Output this message when in dryrun mode. > +decho() { > + if ${dryrun}; then > + echo "DRY-RUN: $*" > + fi > +} > + > +# Usage: has <needle> <list of haystack items> > +# See if <needle> can be found in <haystack>. > +has() { > + local needle="$1" > + shift > + case " $* " in > + *" ${needle} "*) return 0;; > + esac > + return 1 > +} > + > +# Make sure the binfmt_misc filesystem is ready for us to use. > +BINFMT_MISC="/proc/sys/fs/binfmt_misc" > +binfmt_init() { > + if ${dryrun}; then > + return 0 > + fi > + if [ ! -d ${BINFMT_MISC} ]; then > + modprobe binfmt_misc > + fi > + if [ ! -f ${BINFMT_MISC}/register ]; then > + mount binfmt_misc -t binfmt_misc ${BINFMT_MISC} > + fi > +} > + > +# Figure out what CPU we're running on right now. > +probe_cpu() { > + local cpu=$(uname -m) > + > + # See if we need to normalize the value. > + # Only needed when $cpu isn't already what we want. > + case ${cpu} in > + armv[4-9]*) > + cpu="arm" > + ;; > + i?86|i86pc|BePC) > cpu="i386" > - ;; > - m68k) > - cpu="m68k" > - ;; > + ;; > mips*) > cpu="mips" > - ;; > + ;; > "Power Macintosh"|ppc|ppc64) > cpu="ppc" > - ;; > - armv[4-9]*) > - cpu="arm" > - ;; > -esac > - > -# register the interpreter for each cpu except for the native one > -if [ $cpu != "i386" ] ; then > - echo ':i386:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x03\x00:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/local/bin/qemu-i386:' > /proc/sys/fs/binfmt_misc/register > - echo ':i486:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x06\x00:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/local/bin/qemu-i386:' > /proc/sys/fs/binfmt_misc/register > -fi > -if [ $cpu != "alpha" ] ; then > - echo ':alpha:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x26\x90:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/local/bin/qemu-alpha:' > /proc/sys/fs/binfmt_misc/register > -fi > -if [ $cpu != "arm" ] ; then > - echo ':arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/local/bin/qemu-arm:' > /proc/sys/fs/binfmt_misc/register > - echo ':armeb:M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/local/bin/qemu-armeb:' > /proc/sys/fs/binfmt_misc/register > -fi > -if [ $cpu != "aarch64" ] ; then > - echo ':aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/local/bin/qemu-aarch64:' > /proc/sys/fs/binfmt_misc/register > -fi > -if [ $cpu != "sparc" ] ; then > - echo ':sparc:M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x02:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/local/bin/qemu-sparc:' > /proc/sys/fs/binfmt_misc/register > -fi > -if [ $cpu != "ppc" ] ; then > - echo ':ppc:M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x14:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/local/bin/qemu-ppc:' > /proc/sys/fs/binfmt_misc/register > -fi > -if [ $cpu != "m68k" ] ; then > - echo 'Please check cpu value and header information for m68k!' > - echo ':m68k:M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x04:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/local/bin/qemu-m68k:' > /proc/sys/fs/binfmt_misc/register > -fi > -if [ $cpu != "mips" ] ; then > - # FIXME: We could use the other endianness on a MIPS host. > - echo ':mips:M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/local/bin/qemu-mips:' > /proc/sys/fs/binfmt_misc/register > - echo ':mipsel:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/local/bin/qemu-mipsel:' > /proc/sys/fs/binfmt_misc/register > - echo ':mipsn32:M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/local/bin/qemu-mipsn32:' > /proc/sys/fs/binfmt_misc/register > - echo ':mipsn32el:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/local/bin/qemu-mipsn32el:' > /proc/sys/fs/binfmt_misc/register > - echo ':mips64:M::\x7fELF\x02\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/local/bin/qemu-mips64:' > /proc/sys/fs/binfmt_misc/register > - echo ':mips64el:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/local/bin/qemu-mips64el:' > /proc/sys/fs/binfmt_misc/register > -fi > -if [ $cpu != "sh" ] ; then > - echo ':sh4:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x2a\x00:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/local/bin/qemu-sh4:' > /proc/sys/fs/binfmt_misc/register > - echo ':sh4eb:M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x2a:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/local/bin/qemu-sh4eb:' > /proc/sys/fs/binfmt_misc/register > -fi > -if [ $cpu != "s390x" ] ; then > - echo ':s390x:M::\x7fELF\x02\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x16:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/local/bin/qemu-s390x:' > /proc/sys/fs/binfmt_misc/register > -fi > + ;; > + sparc*) > + cpu="sparc" > + ;; > + esac > + > + echo "${cpu}" > +} > + > +host_cpu_compat() { > + has "${host_cpu}" "$@" > +} > + > +# Unregister the specified arch. > +unregister() { > + local fmt="$1" > + local arch="$2" > + local bfile="${BINFMT_MISC}/${arch}" > + > + if [ -e "${bfile}" ]; then > + decho "${arch}: would unregister" > + decho "${arch}: echo -1 > ${bfile}" > + if ! ${dryrun}; then > + if ! echo -1 > "${bfile}"; then > + die "${arch}: unregistering failed" > + fi > + fi > + fi > +} > + > +# Try and locate a suitable qemu binary for the userland arch. > +find_qemu() { > + local arch="$1" > + local qemu="qemu-${arch}" > + local path > + > + for path in \ > + $(which ${qemu} 2>/dev/null) \ > + "$(dirname "$(realpath "$0")")/../${arch}-linux-user/${qemu}" \ > + /usr/local/bin/${qemu} > + do > + if [ -x "${path}" ]; then > + echo "${path}" > + return 0 > + fi > + done > + > + return 1 > +} > + > +# Register the specified magic. > +register() { > + local fmt="$1" > + local arch="$2" > + local path="$(find_qemu "${arch}")" > + local magic=":${arch}:${fmt}:${path}:" > + > + unregister "$@" > + > + if [ -z "${path}" ]; then > + echo "${arch}: Could not locate a qemu binary" > + else > + decho "${arch}: would register using ${path}" > + decho "${arch}: echo '${magic}' > ${BINFMT_MISC}/register" > + if ! ${dryrun}; then > + if ! echo "${magic}" > ${BINFMT_MISC}/register; then > + die "could not register ${arch}" > + fi > + fi > + fi > +} > + > +# Manage the binfmt registration for this target. > +# Usage: process <format> <arch> > +process() { > + if ${register}; then > + register "$@" > + else > + unregister "$@" > + fi > +} > + > +# Keep the process funcs sorted by $cpu name. > +process_aarch64() { > + process 'M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff' aarch64 > +} > +process_alpha() { > + process 'M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x26\x90:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff' alpha > +} > +process_arm() { > + host_cpu_compat aarch64 && return 0 > + process 'M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff' arm > + process 'M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff' armeb > +} > +process_i386() { > + host_cpu_compat x86_64 && return 0 > + process 'M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x03\x00:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff' i386 > + process 'M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x06\x00:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff' i386 > +} > +process_m68k() { > + process 'M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x04:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff' m68k > +} > +process_mips() { > + # FIXME: We could use the other endianness on a MIPS host. > + process 'M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff' mips > + process 'M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff' mipsel > + process 'M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff' mipsn32 > + process 'M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff' mipsn32el > + process 'M::\x7fELF\x02\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff' mips64 > + process 'M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff' mips64el > +} > +process_ppc() { > + process 'M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x14:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff' ppc > +} > +process_sparc() { > + host_cpu_compat sparc64 && return 0 > + process 'M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x02:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff' sparc > +} > +process_s390x() { > + process 'M::\x7fELF\x02\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x16:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff' s390x > +} > +process_sh4() { > + process 'M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x2a\x00:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff' sh4 > + process 'M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x2a:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff' sh4eb > +} > + > +# The main execution point! > +main() { > + local dryrun=false > + local register=true > + local opt > + while getopts hnur opt; do > + case ${opt} in > + h) usage;; > + n) dryrun=true;; > + r) register=true;; > + u) register=false;; > + *) usage 1;; > + esac > + done > + shift $((OPTIND - 1)) > + > + binfmt_init > + > + # Probe all the available register funcs and run through them. > + local all_cpus host_cpu cpu > + host_cpu=$(probe_cpu) > + all_cpus=$(sed -n '/^process_.*() {/{s:^[^_]*_::;s:().*::;p}' "$0") > + for cpu in ${all_cpus}; do > + # Do not register the ELF format if it's the native one. > + host_cpu_compat ${cpu} && continue > + > + # See if the user only wants to process a subset. > + if [ $# -gt 0 ]; then > + has "${cpu}" "$@" || continue > + fi > + > + process_${cpu} > + done > +} > +main "$@"
diff --git a/scripts/qemu-binfmt-conf.sh b/scripts/qemu-binfmt-conf.sh old mode 100644 new mode 100755 index 289b1a3..59de1d2 --- a/scripts/qemu-binfmt-conf.sh +++ b/scripts/qemu-binfmt-conf.sh @@ -1,72 +1,246 @@ #!/bin/sh -# enable automatic i386/ARM/M68K/MIPS/SPARC/PPC/s390 program execution by the kernel - -# load the binfmt_misc module -if [ ! -d /proc/sys/fs/binfmt_misc ]; then - /sbin/modprobe binfmt_misc -fi -if [ ! -f /proc/sys/fs/binfmt_misc/register ]; then - mount binfmt_misc -t binfmt_misc /proc/sys/fs/binfmt_misc -fi - -# probe cpu type -cpu=`uname -m` -case "$cpu" in - i386|i486|i586|i686|i86pc|BePC|x86_64) +# Enable automatic execution of non-native ELFs by the kernel. + +set -e + +usage() { + local ret="${1:-0}" + [ ${ret} -eq 0 ] || exec 1>&2 + cat <<-EOF +Usage: $0 [options] [targets to process] + +Enable automatic execution of non-native ELFs by the kernel by +initializing the binfmt_misc filesystem. + +Options: + -r Register qemu targets [default] + -u Unregister qemu targets + -n Dry run mode; don't actually try to do stuff + -h This screen +EOF + exit ${ret} +} + +# Usage: error <message> +error() { + echo "ERROR: $*" >&2 +} + +# Usage: die <message> +die() { + error "$*" + exit 1 +} + +# Usage: decho <message> +# Output this message when in dryrun mode. +decho() { + if ${dryrun}; then + echo "DRY-RUN: $*" + fi +} + +# Usage: has <needle> <list of haystack items> +# See if <needle> can be found in <haystack>. +has() { + local needle="$1" + shift + case " $* " in + *" ${needle} "*) return 0;; + esac + return 1 +} + +# Make sure the binfmt_misc filesystem is ready for us to use. +BINFMT_MISC="/proc/sys/fs/binfmt_misc" +binfmt_init() { + if ${dryrun}; then + return 0 + fi + if [ ! -d ${BINFMT_MISC} ]; then + modprobe binfmt_misc + fi + if [ ! -f ${BINFMT_MISC}/register ]; then + mount binfmt_misc -t binfmt_misc ${BINFMT_MISC} + fi +} + +# Figure out what CPU we're running on right now. +probe_cpu() { + local cpu=$(uname -m) + + # See if we need to normalize the value. + # Only needed when $cpu isn't already what we want. + case ${cpu} in + armv[4-9]*) + cpu="arm" + ;; + i?86|i86pc|BePC) cpu="i386" - ;; - m68k) - cpu="m68k" - ;; + ;; mips*) cpu="mips" - ;; + ;; "Power Macintosh"|ppc|ppc64) cpu="ppc" - ;; - armv[4-9]*) - cpu="arm" - ;; -esac - -# register the interpreter for each cpu except for the native one -if [ $cpu != "i386" ] ; then - echo ':i386:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x03\x00:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/local/bin/qemu-i386:' > /proc/sys/fs/binfmt_misc/register - echo ':i486:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x06\x00:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/local/bin/qemu-i386:' > /proc/sys/fs/binfmt_misc/register -fi -if [ $cpu != "alpha" ] ; then - echo ':alpha:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x26\x90:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/local/bin/qemu-alpha:' > /proc/sys/fs/binfmt_misc/register -fi -if [ $cpu != "arm" ] ; then - echo ':arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/local/bin/qemu-arm:' > /proc/sys/fs/binfmt_misc/register - echo ':armeb:M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/local/bin/qemu-armeb:' > /proc/sys/fs/binfmt_misc/register -fi -if [ $cpu != "aarch64" ] ; then - echo ':aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/local/bin/qemu-aarch64:' > /proc/sys/fs/binfmt_misc/register -fi -if [ $cpu != "sparc" ] ; then - echo ':sparc:M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x02:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/local/bin/qemu-sparc:' > /proc/sys/fs/binfmt_misc/register -fi -if [ $cpu != "ppc" ] ; then - echo ':ppc:M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x14:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/local/bin/qemu-ppc:' > /proc/sys/fs/binfmt_misc/register -fi -if [ $cpu != "m68k" ] ; then - echo 'Please check cpu value and header information for m68k!' - echo ':m68k:M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x04:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/local/bin/qemu-m68k:' > /proc/sys/fs/binfmt_misc/register -fi -if [ $cpu != "mips" ] ; then - # FIXME: We could use the other endianness on a MIPS host. - echo ':mips:M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/local/bin/qemu-mips:' > /proc/sys/fs/binfmt_misc/register - echo ':mipsel:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/local/bin/qemu-mipsel:' > /proc/sys/fs/binfmt_misc/register - echo ':mipsn32:M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/local/bin/qemu-mipsn32:' > /proc/sys/fs/binfmt_misc/register - echo ':mipsn32el:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/local/bin/qemu-mipsn32el:' > /proc/sys/fs/binfmt_misc/register - echo ':mips64:M::\x7fELF\x02\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/local/bin/qemu-mips64:' > /proc/sys/fs/binfmt_misc/register - echo ':mips64el:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/local/bin/qemu-mips64el:' > /proc/sys/fs/binfmt_misc/register -fi -if [ $cpu != "sh" ] ; then - echo ':sh4:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x2a\x00:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/local/bin/qemu-sh4:' > /proc/sys/fs/binfmt_misc/register - echo ':sh4eb:M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x2a:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/local/bin/qemu-sh4eb:' > /proc/sys/fs/binfmt_misc/register -fi -if [ $cpu != "s390x" ] ; then - echo ':s390x:M::\x7fELF\x02\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x16:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/local/bin/qemu-s390x:' > /proc/sys/fs/binfmt_misc/register -fi + ;; + sparc*) + cpu="sparc" + ;; + esac + + echo "${cpu}" +} + +host_cpu_compat() { + has "${host_cpu}" "$@" +} + +# Unregister the specified arch. +unregister() { + local fmt="$1" + local arch="$2" + local bfile="${BINFMT_MISC}/${arch}" + + if [ -e "${bfile}" ]; then + decho "${arch}: would unregister" + decho "${arch}: echo -1 > ${bfile}" + if ! ${dryrun}; then + if ! echo -1 > "${bfile}"; then + die "${arch}: unregistering failed" + fi + fi + fi +} + +# Try and locate a suitable qemu binary for the userland arch. +find_qemu() { + local arch="$1" + local qemu="qemu-${arch}" + local path + + for path in \ + $(which ${qemu} 2>/dev/null) \ + "$(dirname "$(realpath "$0")")/../${arch}-linux-user/${qemu}" \ + /usr/local/bin/${qemu} + do + if [ -x "${path}" ]; then + echo "${path}" + return 0 + fi + done + + return 1 +} + +# Register the specified magic. +register() { + local fmt="$1" + local arch="$2" + local path="$(find_qemu "${arch}")" + local magic=":${arch}:${fmt}:${path}:" + + unregister "$@" + + if [ -z "${path}" ]; then + echo "${arch}: Could not locate a qemu binary" + else + decho "${arch}: would register using ${path}" + decho "${arch}: echo '${magic}' > ${BINFMT_MISC}/register" + if ! ${dryrun}; then + if ! echo "${magic}" > ${BINFMT_MISC}/register; then + die "could not register ${arch}" + fi + fi + fi +} + +# Manage the binfmt registration for this target. +# Usage: process <format> <arch> +process() { + if ${register}; then + register "$@" + else + unregister "$@" + fi +} + +# Keep the process funcs sorted by $cpu name. +process_aarch64() { + process 'M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff' aarch64 +} +process_alpha() { + process 'M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x26\x90:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff' alpha +} +process_arm() { + host_cpu_compat aarch64 && return 0 + process 'M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff' arm + process 'M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff' armeb +} +process_i386() { + host_cpu_compat x86_64 && return 0 + process 'M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x03\x00:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff' i386 + process 'M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x06\x00:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff' i386 +} +process_m68k() { + process 'M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x04:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff' m68k +} +process_mips() { + # FIXME: We could use the other endianness on a MIPS host. + process 'M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff' mips + process 'M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff' mipsel + process 'M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff' mipsn32 + process 'M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff' mipsn32el + process 'M::\x7fELF\x02\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff' mips64 + process 'M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x08\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff' mips64el +} +process_ppc() { + process 'M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x14:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff' ppc +} +process_sparc() { + host_cpu_compat sparc64 && return 0 + process 'M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x02:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff' sparc +} +process_s390x() { + process 'M::\x7fELF\x02\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x16:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff' s390x +} +process_sh4() { + process 'M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x2a\x00:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff' sh4 + process 'M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x2a:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff' sh4eb +} + +# The main execution point! +main() { + local dryrun=false + local register=true + local opt + while getopts hnur opt; do + case ${opt} in + h) usage;; + n) dryrun=true;; + r) register=true;; + u) register=false;; + *) usage 1;; + esac + done + shift $((OPTIND - 1)) + + binfmt_init + + # Probe all the available register funcs and run through them. + local all_cpus host_cpu cpu + host_cpu=$(probe_cpu) + all_cpus=$(sed -n '/^process_.*() {/{s:^[^_]*_::;s:().*::;p}' "$0") + for cpu in ${all_cpus}; do + # Do not register the ELF format if it's the native one. + host_cpu_compat ${cpu} && continue + + # See if the user only wants to process a subset. + if [ $# -gt 0 ]; then + has "${cpu}" "$@" || continue + fi + + process_${cpu} + done +} +main "$@"
The current script isn't terribly friendly -- you basically get one chance to run it per boot w/out manually recovering the system state. It also doesn't lend itself to being made into an init script w/out a lot of manual editing. Rewrite the sucker with proper functions so that people can easily run it and integrate into their system, and make it easier for CPU maintainers to add new targets. There's also a few fixes smattered about, but considering the whole file has been written from scratch, not sure they need splitting out. Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- scripts/qemu-binfmt-conf.sh | 306 ++++++++++++++++++++++++++++++++++---------- 1 file changed, 240 insertions(+), 66 deletions(-) mode change 100644 => 100755 scripts/qemu-binfmt-conf.sh