diff mbox

2.6.31-rc1 with ide-tape / STT2000A

Message ID 20090809072823.GA2130@liondog.tnic
State Not Applicable
Delegated to: David Miller
Headers show

Commit Message

Borislav Petkov Aug. 9, 2009, 7:28 a.m. UTC 
Hi,

On Sat, Aug 08, 2009 at 04:30:35PM -0400, Jim Duda wrote:
> I'm having trouble using my STT2000A ATAPE TAPE drive after
> upgrading to at least kernel 2.6.30.  I use the tape drive solely
> for tape backup using simple tar commands.
> 
> In previous kernels, I was able to access the tape drive using the
> ide-scsi adaptation layer with /dev/st0
> 
> I realize that in transitioning through 2.6.30 the kernel has
> abandoned the use of ide-scsi.  As I understand it, ide-tape
> interacts directly with the tape drive and I am supposed to now use
> /dev/ht0.

Bartlomiej and I were working on cleaning up IDE but were interrupted
prematurely and IDE is now in deep maintenance mode. Concerning
ide-tape, the driver wasn't being used for ages and was even about to be
removed at a certain point but we decided to wait. Anyways, the driver
lost a lot of fat in the process. I even bought an STT8000A tape off
ebay just to test it here and fix it up so that it can be usable.

If you'd like to test patches you can get Dave's linux-next git repo at
http://git.kernel.org/?p=linux/kernel/git/davem/ide-next-2.6.git;a=summary

apply the patch below and catch all boot output from your machine and
send it to me.

Thanks.

--

Comments

Jim Duda Aug. 9, 2009, 10:51 p.m. UTC | #1 
On 08/09/2009 03:28 AM, Borislav Petkov wrote:

>
> If you'd like to test patches you can get Dave's linux-next git repo at
> http://git.kernel.org/?p=linux/kernel/git/davem/ide-next-2.6.git;a=summary
>

I don't have any experience with installing patches from the git repo.
I tried to figure it out, but didn't have much luck.

If there is a FAQ or HOWTO on git patches, I'll read it.

> apply the patch below and catch all boot output from your machine and
> send it to me.

I upgraded to rc5, and applied these patches.

I'm not getting any additional information in my kernel logs.
The rc5 source uses DEBUG_LOG and not IDETAPE_DEBUG_LOG.

Will Dave's ide-next be part of rc6?

Jim


--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jim Duda Aug. 9, 2009, 11:32 p.m. UTC | #2 
> The rc5 source uses DEBUG_LOG and not IDETAPE_DEBUG_LOG.

Ignore this comment.

I'm working on adding my own debug_log print statements in ide-tape to make sure I know I'm looking at the proper file, etc.

Jim

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jim Duda Aug. 10, 2009, 12:01 a.m. UTC | #3 
On 08/09/2009 06:51 PM, Jim Duda wrote:

>
> I don't have any experience with installing patches from the git repo.
> I tried to figure it out, but didn't have much luck.
>
> If there is a FAQ or HOWTO on git patches, I'll read it.

I found this.  I'm reading and learning what to do.

http://linux.yyz.us/git-howto.html

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jim Duda Aug. 10, 2009, 2:28 a.m. UTC | #4 
On 08/09/2009 03:28 AM, Borislav Petkov wrote:
>
> If you'd like to test patches you can get Dave's linux-next git repo at
> http://git.kernel.org/?p=linux/kernel/git/davem/ide-next-2.6.git;a=summary
>
> apply the patch below and catch all boot output from your machine and
> send it to me.
>

Okay, I'm running the davem/ide-net-2.6.git version with your patch 
below.  My dmesg startup messages for ide-tape are below.  Is this what 
you were hoping to see?

ide-tape: idetape_do_request: cmd: 0x12, sector: 18446744073709551615, 
nr_sectors: 0
ide-tape: ide_tape_issue_pc: retry #0, cmd: 0x12
ide-tape: ide_tape_callback: cmd: 0x12, dsc: 0, err: 0
ide-tape: hdd <-> ht0: Seagate STT20000A rev 8A51
ide-tape: idetape_do_request: cmd: 0x1a, sector: 18446744073709551615, 
nr_sectors: 0
ide-tape: ide_tape_issue_pc: retry #0, cmd: 0x1a
ide-tape: idetape_do_request: cmd: 0x3, sector: 18446744073709551615, 
nr_sectors: 0
ide-tape: ide_tape_issue_pc: retry #0, cmd: 0x03
ide-tape: ide_tape_callback: cmd: 0x3, dsc: 0, err: 0
ide-tape: idetape_analyze_error: cmd: 0x3, sense key = 6, asc = 28, ascq = 0
ide-tape: idetape_do_request: cmd: 0x1a, sector: 18446744073709551615, 
nr_sectors: 0
ide-tape: ide_tape_issue_pc: retry #1, cmd: 0x1a
ide-tape: ide_tape_callback: cmd: 0x1a, dsc: 0, err: 0
ide-tape: idetape_do_request: cmd: 0x1a, sector: 18446744073709551615, 
nr_sectors: 0
ide-tape: ide_tape_issue_pc: retry #0, cmd: 0x1a
ide-tape: ide_tape_callback: cmd: 0x1a, dsc: 0, err: 0
ide-tape: ide_tape_get_bsize_from_bdesc: blk_size: 512, write_prot: 0
ide-tape: hdd <-> ht0: 232KBps, 6*54kB buffer, 400ms tDSC
U



--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jim Duda Aug. 10, 2009, 10:10 p.m. UTC | #5 
On 08/09/2009 10:28 PM, Jim Duda wrote:
> On 08/09/2009 03:28 AM, Borislav Petkov wrote:
>>
>> If you'd like to test patches you can get Dave's linux-next git repo at
>> http://git.kernel.org/?p=linux/kernel/git/davem/ide-next-2.6.git;a=summary
>>
>>

I attempted a tape back up last night with git/davem/ide-next-2.6.git.

The behavior is the same, the 20G byte Travan tape filled up before expected.

Jim

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Alan Cox Aug. 10, 2009, 10:36 p.m. UTC | #6 
On Mon, 10 Aug 2009 18:10:10 -0400
Jim Duda <jim@duda.tzo.com> wrote:

> On 08/09/2009 10:28 PM, Jim Duda wrote:
> > On 08/09/2009 03:28 AM, Borislav Petkov wrote:
> >>
> >> If you'd like to test patches you can get Dave's linux-next git repo at
> >> http://git.kernel.org/?p=linux/kernel/git/davem/ide-next-2.6.git;a=summary
> >>
> >>
> 
> I attempted a tape back up last night with git/davem/ide-next-2.6.git.
> 
> The behavior is the same, the 20G byte Travan tape filled up before expected.

At what distance into the 20G did it fill ?

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jim Duda Aug. 10, 2009, 11:07 p.m. UTC | #7 
>
> At what distance into the 20G did it fill ?

I write the backup using tar czf (compressed)
When I read it back, I get around 15G uncompressed.

I haven't tried writing raw (no compression).

In in the process of trying libata without ide-* drivers now ...

Jim
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>


--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jim Paris Aug. 10, 2009, 11:21 p.m. UTC | #8 
Jim Duda wrote:
>
>>
>> At what distance into the 20G did it fill ?
>
> I write the backup using tar czf (compressed)
> When I read it back, I get around 15G uncompressed.

As far as I can tell, your tape drive (STT2000A) only holds 10G, so
that sounds normal.  Are you sure about the tape size?

See e.g.
  http://www.tech-archive.net/Archive/Windows/microsoft.public.windows.server.general/2005-03/0639.html

-jim
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jim Duda Aug. 10, 2009, 11:34 p.m. UTC | #9 
On 08/10/2009 07:21 PM, Jim Paris wrote:
>
> that sounds normal.  Are you sure about the tape size?

Yeah, you have a good point.  The tapes are technically 10G (native) 20G (compressed).
Maybe I just need to review the backup data in more detail.
The same backup data set used to work in older kernels, but I may be missing some detail.

Jim



--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Borislav Petkov Aug. 11, 2009, 4:33 a.m. UTC | #10 
Hi,

(please don't remove me from the CC list or hit "reply" to the previous
mail so that I get your mails in my inbox, thanks).

On Sun, Aug 09, 2009 at 10:28:43PM -0400, Jim Duda wrote:
> On 08/09/2009 03:28 AM, Borislav Petkov wrote:
> >
> >If you'd like to test patches you can get Dave's linux-next git repo at
> >http://git.kernel.org/?p=linux/kernel/git/davem/ide-next-2.6.git;a=summary
> >
> >apply the patch below and catch all boot output from your machine and
> >send it to me.
> >
> 
> Okay, I'm running the davem/ide-net-2.6.git version with your patch
> below.  My dmesg startup messages for ide-tape are below.  Is this
> what you were hoping to see?

Yes, but send me the whole boot log.
Alan Cox Aug. 11, 2009, 9:37 a.m. UTC | #11 
> I write the backup using tar czf (compressed)
> When I read it back, I get around 15G uncompressed.

if you just read it back with dd so you can see how much it wrote that
would be interesting - it might help identify any obvious boundary code
to check (eg power of two boundaries for overflows)
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jim Duda Aug. 11, 2009, 11:25 a.m. UTC | #12 
On 08/11/2009 12:33 AM, Borislav Petkov wrote:

>
> Yes, but send me the whole boot log.

Boris,

Here is the full boot log (from /var/log/messages history).

FYI, I'm beginning to believe that my entire problem might have more to
do with understanding what's in my backup as compared to a problem with
ide-tape.  I think the driver is working proerly now.  I'm going to do
a series of smaller tests.

I've learned that I can either use ide-tape or the st/libata drivers.
I can now switch back and forth between the two.  I get the same behavior
from either.  I will do some more testing with both, with smaller backup
sets.

Jim


> Aug  9 19:42:12 linux kernel: imklog 3.21.10, log source = /proc/kmsg started.
Aug  9 19:42:12 linux kernel: Linux version 2.6.31-rc1 (jduda@linux) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #3 SMP PREEMPT Tue Aug 4 20:35:30 EDT 2009
Aug  9 19:42:12 linux kernel: KERNEL supported cpus:
Aug  9 19:42:12 linux kernel:  Intel GenuineIntel
Aug  9 19:42:12 linux kernel:  AMD AuthenticAMD
Aug  9 19:42:12 linux kernel:  NSC Geode by NSC
Aug  9 19:42:12 linux kernel:  Cyrix CyrixInstead
Aug  9 19:42:12 linux kernel:  Centaur CentaurHauls
Aug  9 19:42:12 linux kernel:  Transmeta GenuineTMx86
Aug  9 19:42:12 linux kernel:  Transmeta TransmetaCPU
Aug  9 19:42:12 linux kernel:  UMC UMC UMC UMC
Aug  9 19:42:12 linux kernel: BIOS-provided physical RAM map:
Aug  9 19:42:12 linux kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Aug  9 19:42:12 linux kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Aug  9 19:42:12 linux kernel: BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
Aug  9 19:42:12 linux kernel: BIOS-e820: 0000000000100000 - 000000003f730000 (usable)
Aug  9 19:42:12 linux kernel: BIOS-e820: 000000003f730000 - 000000003f740000 (ACPI data)
Aug  9 19:42:12 linux kernel: BIOS-e820: 000000003f740000 - 000000003f7f0000 (ACPI NVS)
Aug  9 19:42:12 linux kernel: BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved)
Aug  9 19:42:12 linux kernel: BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
Aug  9 19:42:12 linux kernel: user-defined physical RAM map:
Aug  9 19:42:12 linux kernel: user: 0000000000000000 - 000000000009fc00 (usable)
Aug  9 19:42:12 linux kernel: user: 000000000009fc00 - 00000000000a0000 (reserved)
Aug  9 19:42:12 linux kernel: user: 00000000000e8000 - 0000000000100000 (reserved)
Aug  9 19:42:12 linux kernel: user: 0000000000100000 - 000000003e800000 (usable)
Aug  9 19:42:12 linux kernel: user: 000000003f730000 - 000000003f740000 (ACPI data)
Aug  9 19:42:12 linux kernel: user: 000000003f740000 - 000000003f7f0000 (ACPI NVS)
Aug  9 19:42:12 linux kernel: user: 000000003f7f0000 - 000000003f800000 (reserved)
Aug  9 19:42:12 linux kernel: user: 00000000ffb80000 - 0000000100000000 (reserved)
Aug  9 19:42:12 linux kernel: DMI 2.3 present.
Aug  9 19:42:12 linux kernel: AMI BIOS detected: BIOS may corrupt low RAM, working around it.
Aug  9 19:42:12 linux kernel: last_pfn = 0x3e800 max_arch_pfn = 0x100000
Aug  9 19:42:12 linux kernel: init_memory_mapping: 0000000000000000-00000000377fe000
Aug  9 19:42:12 linux kernel: RAMDISK: 37c19000 - 37fefeb4
Aug  9 19:42:12 linux kernel: Allocated new RAMDISK: 00529000 - 008ffeb4
Aug  9 19:42:12 linux kernel: Move RAMDISK from 0000000037c19000 - 0000000037fefeb3 to 00529000 - 008ffeb3
Aug  9 19:42:12 linux kernel: ACPI: RSDP 000fa1d0 00014 (v00 ACPIAM)
Aug  9 19:42:12 linux kernel: ACPI: RSDT 3f730000 00030 (v01 A M I  OEMRSDT  06000305 MSFT 00000097)
Aug  9 19:42:12 linux kernel: ACPI: FACP 3f730200 00081 (v01 A M I  OEMFACP  06000305 MSFT 00000097)
Aug  9 19:42:12 linux kernel: ACPI: DSDT 3f7303f0 036CF (v01  P4G80 P4G80000 00000000 INTL 02002026)
Aug  9 19:42:12 linux kernel: ACPI: FACS 3f740000 00040
Aug  9 19:42:12 linux kernel: ACPI: APIC 3f730390 0005C (v01 A M I  OEMAPIC  06000305 MSFT 00000097)
Aug  9 19:42:12 linux kernel: ACPI: OEMB 3f740040 0003F (v01 A M I  OEMBIOS  06000305 MSFT 00000097)
Aug  9 19:42:12 linux kernel: 112MB HIGHMEM available.
Aug  9 19:42:12 linux kernel: 887MB LOWMEM available.
Aug  9 19:42:12 linux kernel:  mapped low ram: 0 - 377fe000
Aug  9 19:42:12 linux kernel:  low ram: 0 - 377fe000
Aug  9 19:42:12 linux kernel:  node 0 low ram: 00000000 - 377fe000
Aug  9 19:42:12 linux kernel:  node 0 bootmap 00011000 - 00017f00
Aug  9 19:42:12 linux kernel: (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
Aug  9 19:42:12 linux kernel:  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Aug  9 19:42:12 linux kernel:  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
Aug  9 19:42:12 linux kernel:  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
Aug  9 19:42:12 linux kernel:  #3 [0000100000 - 00005254dc]    TEXT DATA BSS ==> [0000100000 - 00005254dc]
Aug  9 19:42:12 linux kernel:  #4 [000009f400 - 0000100000]    BIOS reserved ==> [000009f400 - 0000100000]
Aug  9 19:42:12 linux kernel:  #5 [0000526000 - 0000528175]              BRK ==> [0000526000 - 0000528175]
Aug  9 19:42:12 linux kernel:  #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
Aug  9 19:42:12 linux kernel:  #7 [0000529000 - 00008ffeb4]      NEW RAMDISK ==> [0000529000 - 00008ffeb4]
Aug  9 19:42:12 linux kernel:  #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
Aug  9 19:42:12 linux kernel: found SMP MP-table at [c00ff780] ff780
Aug  9 19:42:12 linux kernel: Zone PFN ranges:
Aug  9 19:42:12 linux kernel:  DMA      0x00000010 -> 0x00001000
Aug  9 19:42:12 linux kernel:  Normal   0x00001000 -> 0x000377fe
Aug  9 19:42:12 linux kernel:  HighMem  0x000377fe -> 0x0003e800
Aug  9 19:42:12 linux kernel: Movable zone start PFN for each node
Aug  9 19:42:12 linux kernel: early_node_map[2] active PFN ranges
Aug  9 19:42:12 linux kernel:    0: 0x00000010 -> 0x0000009f
Aug  9 19:42:12 linux kernel:    0: 0x00000100 -> 0x0003e800
Aug  9 19:42:12 linux kernel: Using APIC driver default
Aug  9 19:42:12 linux kernel: ACPI: PM-Timer IO Port: 0x808
Aug  9 19:42:12 linux kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Aug  9 19:42:12 linux kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Aug  9 19:42:12 linux kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Aug  9 19:42:12 linux kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Aug  9 19:42:12 linux kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Aug  9 19:42:12 linux kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Aug  9 19:42:12 linux kernel: Enabling APIC mode:  Flat.  Using 1 I/O APICs
Aug  9 19:42:12 linux kernel: Using ACPI (MADT) for SMP configuration information
Aug  9 19:42:12 linux kernel: SMP: Allowing 2 CPUs, 0 hotplug CPUs
Aug  9 19:42:12 linux kernel: Allocating PCI resources starting at 3f800000 (gap: 3f800000:c0380000)
Aug  9 19:42:12 linux kernel: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
Aug  9 19:42:12 linux kernel: PERCPU: Embedded 13 pages at c19cc000, static data 29980 bytes
Aug  9 19:42:12 linux kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 253386
Aug  9 19:42:12 linux kernel: Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet mem=1000M
Aug  9 19:42:12 linux kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
Aug  9 19:42:12 linux kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Aug  9 19:42:12 linux kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Aug  9 19:42:12 linux kernel: Enabling fast FPU save and restore... done.
Aug  9 19:42:12 linux kernel: Enabling unmasked SIMD FPU exception support... done.
Aug  9 19:42:12 linux kernel: Initializing CPU#0
Aug  9 19:42:12 linux kernel: Initializing HighMem for node 0 (000377fe:0003e800)
Aug  9 19:42:12 linux kernel: Memory: 1004056k/1024000k available (2290k kernel code, 19140k reserved, 1157k data, 308k init, 114696k highmem)
Aug  9 19:42:12 linux kernel: virtual kernel memory layout:
Aug  9 19:42:12 linux kernel:    fixmap  : 0xfff1f000 - 0xfffff000   ( 896 kB)
Aug  9 19:42:12 linux kernel:    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Aug  9 19:42:12 linux kernel:    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
Aug  9 19:42:12 linux kernel:    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
Aug  9 19:42:12 linux kernel:      .init : 0xc0463000 - 0xc04b0000   ( 308 kB)
Aug  9 19:42:12 linux kernel:      .data : 0xc033c923 - 0xc045e0f0   (1157 kB)
Aug  9 19:42:12 linux kernel:      .text : 0xc0100000 - 0xc033c923   (2290 kB)
Aug  9 19:42:12 linux kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Aug  9 19:42:12 linux kernel: NR_IRQS:512
Aug  9 19:42:12 linux kernel: Fast TSC calibration using PIT
Aug  9 19:42:12 linux kernel: Detected 2800.090 MHz processor.
Aug  9 19:42:12 linux kernel: Console: colour VGA+ 80x25
Aug  9 19:42:12 linux kernel: console [tty0] enabled
Aug  9 19:42:12 linux kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.18 BogoMIPS (lpj=2800090)
Aug  9 19:42:12 linux kernel: Security Framework initialized
Aug  9 19:42:12 linux kernel: SELinux:  Initializing.
Aug  9 19:42:12 linux kernel: Mount-cache hash table entries: 512
Aug  9 19:42:12 linux kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
Aug  9 19:42:12 linux kernel: CPU: L2 cache: 512K
Aug  9 19:42:12 linux kernel: CPU: Physical Processor ID: 0
Aug  9 19:42:12 linux kernel: CPU: Processor Core ID: 0
Aug  9 19:42:12 linux kernel: mce: CPU supports 4 MCE banks
Aug  9 19:42:12 linux kernel: CPU0: Thermal monitoring enabled (TM1)
Aug  9 19:42:12 linux kernel: Checking 'hlt' instruction... OK.
Aug  9 19:42:12 linux kernel: ACPI: Core revision 20090521
Aug  9 19:42:12 linux kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Aug  9 19:42:12 linux kernel: CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
Aug  9 19:42:12 linux kernel: Booting processor 1 APIC 0x1 ip 0x6000
Aug  9 19:42:12 linux kernel: Initializing CPU#1
Aug  9 19:42:12 linux kernel: Calibrating delay using timer specific routine.. 5599.16 BogoMIPS (lpj=2799583)
Aug  9 19:42:12 linux kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
Aug  9 19:42:12 linux kernel: CPU: L2 cache: 512K
Aug  9 19:42:12 linux kernel: CPU: Physical Processor ID: 0
Aug  9 19:42:12 linux kernel: CPU: Processor Core ID: 0
Aug  9 19:42:12 linux kernel: mce: CPU supports 4 MCE banks
Aug  9 19:42:12 linux kernel: CPU1: Thermal monitoring enabled (TM1)
Aug  9 19:42:12 linux kernel: CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
Aug  9 19:42:12 linux kernel: checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Aug  9 19:42:12 linux kernel: Brought up 2 CPUs
Aug  9 19:42:12 linux kernel: Total of 2 processors activated (11199.34 BogoMIPS).
Aug  9 19:42:12 linux kernel: khelper used greatest stack depth: 3256 bytes left
Aug  9 19:42:12 linux kernel: NET: Registered protocol family 16
Aug  9 19:42:12 linux kernel: ACPI: bus type pci registered
Aug  9 19:42:12 linux kernel: khelper used greatest stack depth: 3184 bytes left
Aug  9 19:42:12 linux kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
Aug  9 19:42:12 linux kernel: PCI: Using configuration type 1 for base access
Aug  9 19:42:12 linux kernel: bio: create slab <bio-0> at 0
Aug  9 19:42:12 linux kernel: ACPI: Interpreter enabled
Aug  9 19:42:12 linux kernel: ACPI: (supports S0 S1 S3 S5)
Aug  9 19:42:12 linux kernel: ACPI: Using IOAPIC for interrupt routing
Aug  9 19:42:12 linux kernel: ACPI Warning: Incorrect checksum in table [OEMB] - 9C, should be 9B 20090521 tbutils-246
Aug  9 19:42:12 linux kernel: ACPI: No dock devices found.
Aug  9 19:42:12 linux kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Aug  9 19:42:12 linux kernel: pci 0000:00:00.0: Enabling MCH 'Overflow' Device
Aug  9 19:42:12 linux kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Aug  9 19:42:12 linux kernel: pci 0000:00:1d.7: PME# disabled
Aug  9 19:42:12 linux kernel: pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
Aug  9 19:42:12 linux kernel: pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO
Aug  9 19:42:12 linux kernel: pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
Aug  9 19:42:12 linux kernel: pci 0000:00:1f.5: PME# disabled
Aug  9 19:42:12 linux kernel: pci 0000:01:03.0: PME# supported from D1 D2 D3hot D3cold
Aug  9 19:42:12 linux kernel: pci 0000:01:03.0: PME# disabled
Aug  9 19:42:12 linux kernel: pci 0000:01:09.0: PME# supported from D0 D2 D3hot
Aug  9 19:42:12 linux kernel: pci 0000:01:09.0: PME# disabled
Aug  9 19:42:12 linux kernel: pci 0000:01:09.1: PME# supported from D0 D2 D3hot
Aug  9 19:42:12 linux kernel: pci 0000:01:09.1: PME# disabled
Aug  9 19:42:12 linux kernel: pci 0000:01:0f.0: PME# supported from D1 D2 D3hot D3cold
Aug  9 19:42:12 linux kernel: pci 0000:01:0f.0: PME# disabled
Aug  9 19:42:12 linux kernel: pci 0000:00:1e.0: transparent bridge
Aug  9 19:42:12 linux kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Aug  9 19:42:12 linux kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Aug  9 19:42:12 linux kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Aug  9 19:42:12 linux kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
Aug  9 19:42:12 linux kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Aug  9 19:42:12 linux kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 10 11 12 14 15)
Aug  9 19:42:12 linux kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Aug  9 19:42:12 linux kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Aug  9 19:42:12 linux kernel: usbcore: registered new interface driver usbfs
Aug  9 19:42:12 linux kernel: usbcore: registered new interface driver hub
Aug  9 19:42:12 linux kernel: usbcore: registered new device driver usb
Aug  9 19:42:12 linux kernel: PCI: Using ACPI for IRQ routing
Aug  9 19:42:12 linux kernel: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Aug  9 19:42:12 linux kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Aug  9 19:42:12 linux kernel: hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Aug  9 19:42:12 linux kernel: pnp: PnP ACPI init
Aug  9 19:42:12 linux kernel: ACPI: bus type pnp registered
Aug  9 19:42:12 linux kernel: pnp: PnP ACPI: found 12 devices
Aug  9 19:42:12 linux kernel: ACPI: ACPI bus type pnp unregistered
Aug  9 19:42:12 linux kernel: system 00:06: ioport range 0x680-0x6ff has been reserved
Aug  9 19:42:12 linux kernel: system 00:07: ioport range 0x4d0-0x4d1 has been reserved
Aug  9 19:42:12 linux kernel: system 00:07: ioport range 0x800-0x87f has been reserved
Aug  9 19:42:12 linux kernel: system 00:07: ioport range 0x480-0x4bf has been reserved
Aug  9 19:42:12 linux kernel: system 00:07: iomem range 0xfed20000-0xfed8ffff has been reserved
Aug  9 19:42:12 linux kernel: system 00:07: iomem range 0xffb00000-0xffbfffff could not be reserved
Aug  9 19:42:12 linux kernel: system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
Aug  9 19:42:12 linux kernel: system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
Aug  9 19:42:12 linux kernel: system 00:0b: iomem range 0x0-0x9ffff could not be reserved
Aug  9 19:42:12 linux kernel: system 00:0b: iomem range 0xc0000-0xdffff could not be reserved
Aug  9 19:42:12 linux kernel: system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
Aug  9 19:42:12 linux kernel: system 00:0b: iomem range 0x100000-0x3f7effff could not be reserved
Aug  9 19:42:12 linux kernel: system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved
Aug  9 19:42:12 linux kernel: pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
Aug  9 19:42:12 linux kernel: pci 0000:00:1e.0:   IO window: 0xd000-0xdfff
Aug  9 19:42:12 linux kernel: pci 0000:00:1e.0:   MEM window: 0xf6400000-0xfe5fffff
Aug  9 19:42:12 linux kernel: pci 0000:00:1e.0:   PREFETCH window: 0xe6200000-0xe62fffff
Aug  9 19:42:12 linux kernel: NET: Registered protocol family 2
Aug  9 19:42:12 linux kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Aug  9 19:42:12 linux kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Aug  9 19:42:12 linux kernel: TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
Aug  9 19:42:12 linux kernel: TCP: Hash tables configured (established 131072 bind 65536)
Aug  9 19:42:12 linux kernel: TCP reno registered
Aug  9 19:42:12 linux kernel: NET: Registered protocol family 1
Aug  9 19:42:12 linux kernel: Trying to unpack rootfs image as initramfs...
Aug  9 19:42:12 linux kernel: Freeing initrd memory: 3931k freed
Aug  9 19:42:12 linux kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Aug  9 19:42:12 linux kernel: apm: disabled - APM is not SMP safe.
Aug  9 19:42:12 linux kernel: audit: initializing netlink socket (disabled)
Aug  9 19:42:12 linux kernel: type=2000 audit(1249861302.367:1): initialized
Aug  9 19:42:12 linux kernel: highmem bounce pool size: 64 pages
Aug  9 19:42:12 linux kernel: HugeTLB registered 4 MB page size, pre-allocated 0 pages
Aug  9 19:42:12 linux kernel: VFS: Disk quotas dquot_6.5.2
Aug  9 19:42:12 linux kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Aug  9 19:42:12 linux kernel: msgmni has been set to 1745
Aug  9 19:42:12 linux kernel: cryptomgr_test used greatest stack depth: 3024 bytes left
Aug  9 19:42:12 linux kernel: alg: No test for stdrng (krng)
Aug  9 19:42:12 linux kernel: io scheduler noop registered
Aug  9 19:42:12 linux kernel: io scheduler anticipatory registered (default)
Aug  9 19:42:12 linux kernel: io scheduler deadline registered
Aug  9 19:42:12 linux kernel: io scheduler cfq registered
Aug  9 19:42:12 linux kernel: processor LNXCPU:00: registered as cooling_device0
Aug  9 19:42:12 linux kernel: processor LNXCPU:01: registered as cooling_device1
Aug  9 19:42:12 linux kernel: isapnp: Scanning for PnP cards...
Aug  9 19:42:12 linux kernel: isapnp: No Plug & Play device found
Aug  9 19:42:12 linux kernel: Real Time Clock Driver v1.12b
Aug  9 19:42:12 linux kernel: intel_rng: FWH not detected
Aug  9 19:42:12 linux kernel: Linux agpgart interface v0.103
Aug  9 19:42:12 linux kernel: agpgart-intel 0000:00:00.0: Intel 865 Chipset
Aug  9 19:42:12 linux kernel: agpgart-intel 0000:00:00.0: detected 8060K stolen memory
Aug  9 19:42:12 linux kernel: agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
Aug  9 19:42:12 linux kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing enabled
Aug  9 19:42:12 linux kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Aug  9 19:42:12 linux kernel: Platform driver 'serial8250' needs updating - please use dev_pm_ops
Aug  9 19:42:12 linux kernel: brd: module loaded
Aug  9 19:42:12 linux kernel: Uniform Multi-Platform E-IDE driver
Aug  9 19:42:12 linux kernel: piix 0000:00:1f.1: IDE controller (0x8086:0x24db rev 0x02)
Aug  9 19:42:12 linux kernel: PIIX_IDE 0000:00:1f.1: enabling device (0005 -> 0007)
Aug  9 19:42:12 linux kernel: PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Aug  9 19:42:12 linux kernel: piix 0000:00:1f.1: not 100% native mode: will probe irqs later
Aug  9 19:42:12 linux kernel:    ide0: BM-DMA at 0xfc00-0xfc07
Aug  9 19:42:12 linux kernel:    ide1: BM-DMA at 0xfc08-0xfc0f
Aug  9 19:42:12 linux kernel: hdc: HL-DT-ST GCE-8160B, ATAPI CD/DVD-ROM drive
Aug  9 19:42:12 linux kernel: hdd: Seagate STT20000A, ATAPI TAPE drive
Aug  9 19:42:12 linux kernel: hdc: MWDMA2 mode selected
Aug  9 19:42:12 linux kernel: hdd: Disabling (U)DMA for Seagate STT20000A (blacklisted)
Aug  9 19:42:12 linux kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Aug  9 19:42:12 linux kernel: ide1 at 0x170-0x177,0x376 on irq 15
Aug  9 19:42:12 linux kernel: ide-gd driver 1.18
Aug  9 19:42:12 linux kernel: ide-cd driver 5.00
Aug  9 19:42:12 linux kernel: ide-cd: hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
Aug  9 19:42:12 linux kernel: Uniform CD-ROM driver Revision: 3.20
Aug  9 19:42:12 linux kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Aug  9 19:42:12 linux kernel: Platform driver 'i8042' needs updating - please use dev_pm_ops
Aug  9 19:42:12 linux kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Aug  9 19:42:12 linux kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Aug  9 19:42:12 linux kernel: mice: PS/2 mouse device common for all mice
Aug  9 19:42:12 linux kernel: cpuidle: using governor ladder
Aug  9 19:42:12 linux kernel: usbcore: registered new interface driver hiddev
Aug  9 19:42:12 linux kernel: usbcore: registered new interface driver usbhid
Aug  9 19:42:12 linux kernel: usbhid: v2.6:USB HID core driver
Aug  9 19:42:12 linux kernel: TCP cubic registered
Aug  9 19:42:12 linux kernel: Initializing XFRM netlink socket
Aug  9 19:42:12 linux kernel: NET: Registered protocol family 17
Aug  9 19:42:12 linux kernel: Using IPI No-Shortcut mode
Aug  9 19:42:12 linux kernel: Freeing unused kernel memory: 308k freed
Aug  9 19:42:12 linux kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Aug  9 19:42:12 linux kernel: ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
Aug  9 19:42:12 linux kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Aug  9 19:42:12 linux kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Aug  9 19:42:12 linux kernel: ehci_hcd 0000:00:1d.7: debug port 1
Aug  9 19:42:12 linux kernel: ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe77bc00
Aug  9 19:42:12 linux kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Aug  9 19:42:12 linux kernel: usb usb1: configuration #1 chosen from 1 choice
Aug  9 19:42:12 linux kernel: hub 1-0:1.0: USB hub found
Aug  9 19:42:12 linux kernel: hub 1-0:1.0: 8 ports detected
Aug  9 19:42:12 linux kernel: modprobe used greatest stack depth: 2680 bytes left
Aug  9 19:42:12 linux kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Aug  9 19:42:12 linux kernel: uhci_hcd: USB Universal Host Controller Interface driver
Aug  9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Aug  9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Aug  9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Aug  9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ef00
Aug  9 19:42:12 linux kernel: usb usb2: configuration #1 chosen from 1 choice
Aug  9 19:42:12 linux kernel: hub 2-0:1.0: USB hub found
Aug  9 19:42:12 linux kernel: hub 2-0:1.0: 2 ports detected
Aug  9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Aug  9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Aug  9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Aug  9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ef20
Aug  9 19:42:12 linux kernel: usb usb3: configuration #1 chosen from 1 choice
Aug  9 19:42:12 linux kernel: hub 3-0:1.0: USB hub found
Aug  9 19:42:12 linux kernel: hub 3-0:1.0: 2 ports detected
Aug  9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Aug  9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Aug  9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Aug  9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef40
Aug  9 19:42:12 linux kernel: usb usb4: configuration #1 chosen from 1 choice
Aug  9 19:42:12 linux kernel: hub 4-0:1.0: USB hub found
Aug  9 19:42:12 linux kernel: hub 4-0:1.0: 2 ports detected
Aug  9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Aug  9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Aug  9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Aug  9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef80
Aug  9 19:42:12 linux kernel: usb usb5: configuration #1 chosen from 1 choice
Aug  9 19:42:12 linux kernel: hub 5-0:1.0: USB hub found
Aug  9 19:42:12 linux kernel: hub 5-0:1.0: 2 ports detected
Aug  9 19:42:12 linux kernel: modprobe used greatest stack depth: 2668 bytes left
Aug  9 19:42:12 linux kernel: SCSI subsystem initialized
Aug  9 19:42:12 linux kernel: ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Aug  9 19:42:12 linux kernel: ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
Aug  9 19:42:12 linux kernel: scsi0 : ata_piix
Aug  9 19:42:12 linux kernel: scsi1 : ata_piix
Aug  9 19:42:12 linux kernel: ata1: SATA max UDMA/133 cmd 0xefe0 ctl 0xefac bmdma 0xef60 irq 18
Aug  9 19:42:12 linux kernel: ata2: SATA max UDMA/133 cmd 0xefa0 ctl 0xefa8 bmdma 0xef68 irq 18
Aug  9 19:42:12 linux kernel: ata1.00: ATA-7: Maxtor 6L200S0, BANC1G10, max UDMA/133
Aug  9 19:42:12 linux kernel: ata1.00: 398297088 sectors, multi 16: LBA48 NCQ (not used)
Aug  9 19:42:12 linux kernel: ata2.00: ATA-7: Maxtor 7L300S0, BANC1G10, max UDMA/133
Aug  9 19:42:12 linux kernel: ata2.00: 586114704 sectors, multi 16: LBA48 NCQ (not used)
Aug  9 19:42:12 linux kernel: ata1.00: configured for UDMA/133
Aug  9 19:42:12 linux kernel: ata2.00: configured for UDMA/133
Aug  9 19:42:12 linux kernel: scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6L200S0   BANC PQ: 0 ANSI: 5
Aug  9 19:42:12 linux kernel: sd 0:0:0:0: [sda] 398297088 512-byte logical blocks: (203 GB/189 GiB)
Aug  9 19:42:12 linux kernel: scsi 1:0:0:0: Direct-Access     ATA      Maxtor 7L300S0   BANC PQ: 0 ANSI: 5
Aug  9 19:42:12 linux kernel: sd 0:0:0:0: [sda] Write Protect is off
Aug  9 19:42:12 linux kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug  9 19:42:12 linux kernel: sd 1:0:0:0: [sdb] 586114704 512-byte logical blocks: (300 GB/279 GiB)
Aug  9 19:42:12 linux kernel: sda:
Aug  9 19:42:12 linux kernel: sd 1:0:0:0: [sdb] Write Protect is off
Aug  9 19:42:12 linux kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug  9 19:42:12 linux kernel: sdb: sda1 sda2
Aug  9 19:42:12 linux kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Aug  9 19:42:12 linux kernel: unknown partition table
Aug  9 19:42:12 linux kernel: sd 1:0:0:0: [sdb] Attached SCSI disk
Aug  9 19:42:12 linux kernel: device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Aug  9 19:42:12 linux kernel: input: PS/2 Logitech Mouse as /class/input/input0
Aug  9 19:42:12 linux kernel: input: AT Translated Set 2 keyboard as /class/input/input1
Aug  9 19:42:12 linux kernel: usb 3-1: new full speed USB device using uhci_hcd and address 2
Aug  9 19:42:12 linux kernel: lvm used greatest stack depth: 2120 bytes left
Aug  9 19:42:12 linux kernel: device-mapper: table: 253:0: target device sda2 is misaligned
Aug  9 19:42:12 linux kernel: device-mapper: table: 253:0: target device sda2 is misaligned
Aug  9 19:42:12 linux kernel: device-mapper: table: 253:1: target device sda2 is misaligned
Aug  9 19:42:12 linux kernel: device-mapper: table: 253:1: target device sda2 is misaligned
Aug  9 19:42:12 linux kernel: usb 3-1: configuration #1 chosen from 1 choice
Aug  9 19:42:12 linux kernel: EXT3-fs: INFO: recovery required on readonly filesystem.
Aug  9 19:42:12 linux kernel: EXT3-fs: write access will be enabled during recovery.
Aug  9 19:42:12 linux kernel: EXT3-fs: dm-0: orphan cleanup on readonly fs
Aug  9 19:42:12 linux kernel: EXT3-fs: dm-0: 5 orphan inodes deleted
Aug  9 19:42:12 linux kernel: EXT3-fs: recovery complete.
Aug  9 19:42:12 linux kernel: kjournald starting.  Commit interval 5 seconds
Aug  9 19:42:12 linux kernel: EXT3-fs: mounted filesystem with writeback data mode.
Aug  9 19:42:12 linux kernel: SELinux:  Disabled at runtime.
Aug  9 19:42:12 linux kernel: type=1404 audit(1249861307.958:2): selinux=0 auid=4294967295 ses=4294967295
Aug  9 19:42:12 linux kernel: cat used greatest stack depth: 2032 bytes left
Aug  9 19:42:12 linux kernel: udevd version 127 started
Aug  9 19:42:12 linux kernel: Platform driver 'pcspkr' needs updating - please use dev_pm_ops
Aug  9 19:42:12 linux kernel: input: PC Speaker as /class/input/input2
Aug  9 19:42:12 linux kernel: ide-tape: hdd <-> ht0: Seagate STT20000A rev 8A51
Aug  9 19:42:12 linux kernel: ide-tape: hdd <-> ht0: 232KBps, 6*54kB buffer, 400ms tDSC
Aug  9 19:42:12 linux kernel: 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Aug  9 19:42:12 linux kernel: serial 0000:01:09.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Aug  9 19:42:12 linux kernel: ttyS4: detected caps 00000700 should be 00000100
Aug  9 19:42:12 linux kernel: 0000:01:09.0: ttyS4 at I/O 0xdea0 (irq = 21) is a 16C950/954
Aug  9 19:42:12 linux kernel: ttyS5: detected caps 00000700 should be 00000100
Aug  9 19:42:12 linux kernel: 0000:01:09.0: ttyS5 at I/O 0xdea8 (irq = 21) is a 16C950/954
Aug  9 19:42:12 linux kernel: ttyS6: detected caps 00000700 should be 00000100
Aug  9 19:42:12 linux kernel: 0000:01:09.0: ttyS6 at I/O 0xdeb0 (irq = 21) is a 16C950/954
Aug  9 19:42:12 linux kernel: ttyS7: detected caps 00000700 should be 00000100
Aug  9 19:42:12 linux kernel: 0000:01:09.0: ttyS7 at I/O 0xdeb8 (irq = 21) is a 16C950/954
Aug  9 19:42:12 linux kernel: usbcore: registered new interface driver usbserial
Aug  9 19:42:12 linux kernel: USB Serial support registered for generic
Aug  9 19:42:12 linux kernel: usbcore: registered new interface driver usbserial_generic
Aug  9 19:42:12 linux kernel: usbserial: USB Serial Driver core
Aug  9 19:42:12 linux kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Aug  9 19:42:12 linux kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Aug  9 19:42:12 linux kernel: input: Power Button as /class/input/input3
Aug  9 19:42:12 linux kernel: ACPI: Power Button [PWRF]
Aug  9 19:42:12 linux kernel: input: Power Button as /class/input/input4
Aug  9 19:42:12 linux kernel: ACPI: Power Button [PWRB]
Aug  9 19:42:12 linux kernel: 8139too Fast Ethernet driver 0.9.28
Aug  9 19:42:12 linux kernel: 8139too 0000:01:0f.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Aug  9 19:42:12 linux kernel: eth0: RealTek RTL8139 at 0xd400, 00:0c:6e:82:94:4e, IRQ 19
Aug  9 19:42:12 linux kernel: sata_sil 0000:01:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Aug  9 19:42:12 linux kernel: scsi2 : sata_sil
Aug  9 19:42:12 linux kernel: scsi3 : sata_sil
Aug  9 19:42:12 linux kernel: ata3: SATA max UDMA/100 mmio m512@0xfe5ff800 tf 0xfe5ff880 irq 21
Aug  9 19:42:12 linux kernel: ata4: SATA max UDMA/100 mmio m512@0xfe5ff800 tf 0xfe5ff8c0 irq 21
Aug  9 19:42:12 linux kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Aug  9 19:42:12 linux kernel: r8169 0000:01:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Aug  9 19:42:12 linux kernel: r8169 0000:01:03.0: no PCI Express capability
Aug  9 19:42:12 linux kernel: eth1: RTL8110s at 0xf8bf4c00, 00:14:bf:56:f4:1d, XID 04000000 IRQ 16
Aug  9 19:42:12 linux kernel: USB Serial support registered for pl2303
Aug  9 19:42:12 linux kernel: pl2303 3-1:1.0: pl2303 converter detected
Aug  9 19:42:12 linux kernel: usb 3-1: pl2303 converter now attached to ttyUSB0
Aug  9 19:42:12 linux kernel: usbcore: registered new interface driver pl2303
Aug  9 19:42:12 linux kernel: pl2303: Prolific PL2303 USB to serial adaptor driver
Aug  9 19:42:12 linux kernel: i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Aug  9 19:42:12 linux kernel: ata3: SATA link down (SStatus 0 SControl 310)
Aug  9 19:42:12 linux kernel: ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Aug  9 19:42:12 linux kernel: ata4.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
Aug  9 19:42:12 linux kernel: ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Aug  9 19:42:12 linux kernel: ata4.00: configured for UDMA/100
Aug  9 19:42:12 linux kernel: scsi 3:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
Aug  9 19:42:12 linux kernel: sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Aug  9 19:42:12 linux kernel: sd 3:0:0:0: Attached scsi generic sg2 type 0
Aug  9 19:42:12 linux kernel: sd 3:0:0:0: [sdc] Write Protect is off
Aug  9 19:42:12 linux kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug  9 19:42:12 linux kernel: sdc: unknown partition table
Aug  9 19:42:12 linux kernel: sd 3:0:0:0: [sdc] Attached SCSI disk
Aug  9 19:42:12 linux kernel: Linux video capture interface: v2.00
Aug  9 19:42:12 linux kernel: Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Aug  9 19:42:12 linux kernel: ENS1371 0000:01:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Aug  9 19:42:12 linux kernel: bttv: driver version 0.9.18 loaded
Aug  9 19:42:12 linux kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture
Aug  9 19:42:12 linux kernel: cx88/0: cx2388x v4l2 driver version 0.0.7 loaded
Aug  9 19:42:12 linux kernel: cx2388x alsa driver version 0.0.7 loaded
Aug  9 19:42:12 linux kernel: cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded
Aug  9 19:42:12 linux kernel: intel8x0_measure_ac97_clock: measured 50586 usecs (2438 samples)
Aug  9 19:42:12 linux kernel: intel8x0: clocking to 48000
Aug  9 19:42:12 linux kernel: modprobe used greatest stack depth: 1456 bytes left
Aug  9 19:42:12 linux kernel: bttv: Bt8xx card found (0).
Aug  9 19:42:12 linux kernel: bttv 0000:01:0b.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Aug  9 19:42:12 linux kernel: bttv0: Bt878 (rev 17) at 0000:01:0b.0, irq: 23, latency: 64, mmio: 0xe62fe000
Aug  9 19:42:12 linux kernel: bttv0: using: GrandTec Multi Capture Card (Bt878) [card=77,insmod option]
Aug  9 19:42:12 linux kernel: IRQ 23/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
Aug  9 19:42:12 linux kernel: bttv0: tuner absent
Aug  9 19:42:12 linux kernel: bttv0: registered device video0
Aug  9 19:42:12 linux kernel: bttv0: registered device vbi0
Aug  9 19:42:12 linux kernel: bttv0: PLL: 28636363 => 35468950 .. ok
Aug  9 19:42:12 linux kernel: cx8800 0000:01:0a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Aug  9 19:42:12 linux kernel: cx88[0]: subsystem: 7063:5500, board: pcHDTV HD5500 HDTV [card=47,autodetected], frontend(s): 1
Aug  9 19:42:12 linux kernel: cx88[0]: TV tuner type 64, Radio tuner type -1
Aug  9 19:42:12 linux kernel: tuner 2-0043: chip found @ 0x86 (cx88[0])
Aug  9 19:42:12 linux kernel: tda9887 2-0043: creating new instance
Aug  9 19:42:12 linux kernel: tda9887 2-0043: tda988[5/6/7] found
Aug  9 19:42:12 linux kernel: tuner 2-0061: chip found @ 0xc2 (cx88[0])
Aug  9 19:42:12 linux kernel: tuner-simple 2-0061: creating new instance
Aug  9 19:42:12 linux kernel: tuner-simple 2-0061: type set to 64 (LG TDVS-H06xF)
Aug  9 19:42:12 linux kernel: input: cx88 IR (pcHDTV HD5500 HDTV) as /class/input/input5
Aug  9 19:42:12 linux kernel: cx88[0]/0: found at 0000:01:0a.0, rev: 5, irq: 22, latency: 64, mmio: 0xfa000000
Aug  9 19:42:12 linux kernel: IRQ 22/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
Aug  9 19:42:12 linux kernel: cx88[0]/0: registered device video1 [v4l2]
Aug  9 19:42:12 linux kernel: cx88[0]/0: registered device vbi1
Aug  9 19:42:12 linux kernel: cx88_audio 0000:01:0a.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Aug  9 19:42:12 linux kernel: IRQ 22/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
Aug  9 19:42:12 linux kernel: cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
Aug  9 19:42:12 linux kernel: cx88[0]/2: cx2388x 8802 Driver Manager
Aug  9 19:42:12 linux kernel: cx88-mpeg driver manager 0000:01:0a.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Aug  9 19:42:12 linux kernel: cx88[0]/2: found at 0000:01:0a.2, rev: 5, irq: 22, latency: 64, mmio: 0xfc000000
Aug  9 19:42:12 linux kernel: IRQ 22/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
Aug  9 19:42:12 linux kernel: cx88/2: cx2388x dvb driver version 0.0.7 loaded
Aug  9 19:42:12 linux kernel: cx88/2: registering cx8802 driver, type: dvb access: shared
Aug  9 19:42:12 linux kernel: cx88[0]/2: subsystem: 7063:5500, board: pcHDTV HD5500 HDTV [card=47]
Aug  9 19:42:12 linux kernel: cx88[0]/2: cx2388x based DVB/ATSC card
Aug  9 19:42:12 linux kernel: cx8802_alloc_frontends() allocating 1 frontend(s)
Aug  9 19:42:12 linux kernel: tuner-simple 2-0061: attaching existing instance
Aug  9 19:42:12 linux kernel: tuner-simple 2-0061: type set to 64 (LG TDVS-H06xF)
Aug  9 19:42:12 linux kernel: tda9887 2-0043: attaching existing instance
Aug  9 19:42:12 linux kernel: DVB: registering new adapter (cx88[0])
Aug  9 19:42:12 linux kernel: DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)...
Aug  9 19:42:12 linux kernel: device-mapper: table: 253:2: target device sdb is misaligned
Aug  9 19:42:12 linux kernel: device-mapper: table: 253:2: target device sdc is misaligned
Aug  9 19:42:12 linux kernel: device-mapper: table: 253:2: target device sdb is misaligned
Aug  9 19:42:12 linux kernel: device-mapper: table: 253:2: target device sdc is misaligned
Aug  9 19:42:12 linux kernel: EXT3 FS on dm-0, internal journal
Aug  9 19:42:12 linux kernel: kjournald starting.  Commit interval 5 seconds
Aug  9 19:42:12 linux kernel: EXT3 FS on sda1, internal journal
Aug  9 19:42:12 linux kernel: EXT3-fs: mounted filesystem with writeback data mode.
Aug  9 19:42:12 linux kernel: kjournald starting.  Commit interval 5 seconds
Aug  9 19:42:12 linux kernel: EXT3 FS on dm-2, internal journal
Aug  9 19:42:12 linux kernel: EXT3-fs: mounted filesystem with writeback data mode.
Aug  9 19:42:12 linux kernel: Adding 1015800k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:1015800k
Aug  9 19:42:12 linux kernel: NET: Registered protocol family 10
Aug  9 19:42:12 linux kernel: lo: Disabled Privacy Extensions
Aug  9 19:42:12 linux kernel: r8169: eth1: link up
Aug  9 19:42:12 linux rsyslogd: [origin software="rsyslogd" swVersion="3.21.10" x-pid="1679" x-info="http://www.rsyslog.com"] restart
Aug  9 19:42:12 linux rpc.statd[1717]: Version 1.1.4 Starting
Aug  9 19:42:13 linux kernel: RPC: Registered udp transport module.
Aug  9 19:42:13 linux kernel: RPC: Registered tcp transport module.
Aug  9 19:42:16 linux acpid: starting up
Aug  9 19:42:16 linux ypserv[1830]: WARNING: no securenets file found!
Aug  9 19:42:17 linux dnsmasq[1865]: started, version 2.45 cachesize 150
Aug  9 19:42:17 linux dnsmasq[1865]: compile time options: IPv6 GNU-getopt no-ISC-leasefile DBus no-I18N TFTP
Aug  9 19:42:17 linux dnsmasq[1865]: reading /etc/resolv.conf
Aug  9 19:42:17 linux dnsmasq[1865]: using nameserver 71.250.0.12#53
Aug  9 19:42:17 linux dnsmasq[1865]: using nameserver 71.243.0.12#53
Aug  9 19:42:17 linux dnsmasq[1865]: read /etc/hosts - 14 addresses
Aug  9 19:42:17 linux xinetd[1884]: /etc/xinetd.d/archive is not a regular file. It is being skipped.
Aug  9 19:42:17 linux ntpd[1891]: ntpd 4.2.4p6@1.1549-o Mon Jan 12 14:07:28 UTC 2009 (1)
Aug  9 19:42:17 linux ntpd[1892]: precision = 0.627 usec
Aug  9 19:42:17 linux ntpd[1892]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
Aug  9 19:42:17 linux ntpd[1892]: Listening on interface #1 wildcard, ::#123 Disabled
Aug  9 19:42:17 linux ntpd[1892]: Listening on interface #2 lo, ::1#123 Enabled
Aug  9 19:42:17 linux ntpd[1892]: Listening on interface #3 eth1, fe80::214:bfff:fe56:f41d#123 Enabled
Aug  9 19:42:17 linux ntpd[1892]: Listening on interface #4 lo, 127.0.0.1#123 Enabled
Aug  9 19:42:17 linux ntpd[1892]: Listening on interface #5 eth1, 192.168.1.254#123 Enabled
Aug  9 19:42:17 linux ntpd[1892]: Listening on routing socket on fd #22 for interface updates
Aug  9 19:42:17 linux ntpd[1892]: kernel time sync status 0040
Aug  9 19:42:17 linux xinetd[1884]: /etc/xinetd.d/save is not a regular file. It is being skipped.
Aug  9 19:42:17 linux ntpd[1892]: frequency initialized -74.253 PPM from /var/lib/ntp/drift
Aug  9 19:42:17 linux xinetd[1884]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in.
Aug  9 19:42:17 linux xinetd[1884]: Started working: 2 available services
Aug  9 19:42:18 linux kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Aug  9 19:42:18 linux rpc.idmapd[1754]: nfsdreopen: Opening '/proc/net/rpc/nfs4.nametoid/channel' failed: errno 2 (No such file or directory)
Aug  9 19:42:18 linux rpc.idmapd[1754]: nfsdreopen: Opening '/proc/net/rpc/nfs4.idtoname/channel' failed: errno 2 (No such file or directory)
Aug  9 19:42:21 linux dhcpd: Internet Systems Consortium DHCP Server 4.0.0
Aug  9 19:42:21 linux dhcpd: Copyright 2004-2007 Internet Systems Consortium.
Aug  9 19:42:21 linux dhcpd: All rights reserved.
Aug  9 19:42:21 linux dhcpd: For info, please visit http://www.isc.org/sw/dhcp/
Aug  9 19:42:21 linux dhcpd: Not searching LDAP since ldap-server, ldap-port and ldap-base-dn were not specified in the config file
Aug  9 19:42:21 linux dhcpd: Wrote 0 class decls to leases file.
Aug  9 19:42:21 linux dhcpd: Wrote 0 deleted host decls to leases file.
Aug  9 19:42:21 linux dhcpd: Wrote 0 new dynamic host decls to leases file.
Aug  9 19:42:21 linux dhcpd: Wrote 48 leases to leases file.
Aug  9 19:42:21 linux dhcpd: Listening on LPF/eth1/00:14:bf:56:f4:1d/192.168.1.0/24
Aug  9 19:42:21 linux dhcpd: Sending on   LPF/eth1/00:14:bf:56:f4:1d/192.168.1.0/24
Aug  9 19:42:21 linux dhcpd: Sending on   Socket/fallback/fallback-net
Aug  9 19:42:26 linux /usr/sbin/gpm[2165]: *** info [daemon/startup.c(136)]:
Aug  9 19:42:26 linux /usr/sbin/gpm[2165]: Started gpm successfully. Entered daemon mode.
Aug  9 19:42:26 linux /usr/sbin/gpm[2165]: *** info [mice.c(1988)]:
Aug  9 19:42:26 linux /usr/sbin/gpm[2165]: imps2: Auto-detected intellimouse PS/2
Aug  9 19:42:29 linux kernel: fuse init (API version 7.11)
Aug  9 19:42:32 linux avahi-daemon[2300]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
Aug  9 19:42:32 linux avahi-daemon[2300]: Successfully dropped root privileges.
Aug  9 19:42:32 linux avahi-daemon[2300]: avahi-daemon 0.6.22 starting up.
Aug  9 19:42:32 linux avahi-daemon[2300]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
Aug  9 19:42:32 linux avahi-daemon[2300]: Successfully called chroot().
Aug  9 19:42:32 linux avahi-daemon[2300]: Successfully dropped remaining capabilities.
Aug  9 19:42:32 linux avahi-daemon[2300]: Loading service file /services/ssh.service.
Aug  9 19:42:32 linux avahi-daemon[2300]: Joining mDNS multicast group on interface eth1.IPv4 with address 192.168.1.254.
Aug  9 19:42:32 linux avahi-daemon[2300]: New relevant interface eth1.IPv4 for mDNS.
Aug  9 19:42:32 linux avahi-daemon[2300]: Network interface enumeration completed.
Aug  9 19:42:32 linux avahi-daemon[2300]: Registering new address record for fe80::214:bfff:fe56:f41d on eth1.*.
Aug  9 19:42:32 linux avahi-daemon[2300]: Registering new address record for 192.168.1.254 on eth1.IPv4.
Aug  9 19:42:32 linux avahi-daemon[2300]: Registering HINFO record with values 'I686'/'LINUX'.
Aug  9 19:42:33 linux avahi-daemon[2300]: Server startup complete. Host name is linux.local. Local service cookie is 2163202976.
Aug  9 19:42:34 linux avahi-daemon[2300]: Service "linux" (/services/ssh.service) successfully established.
Aug  9 19:42:36 linux logger: Starting misterhouse:
Aug  9 19:42:36 linux logger: /usr/local/bin:/usr/X11R6/bin:/sbin:/usr/sbin:/bin:/usr/bin
Aug  9 19:42:36 linux logger: /home/misterhouse
Aug  9 19:42:36 linux acpid: client connected from 2530[68:68]
Aug  9 19:42:36 linux logger: :/usr/local/lib
Aug  9 19:42:36 linux logger: :0
Aug  9 19:42:36 linux logger: /bin/tcsh
Aug  9 19:42:44 linux pulseaudio[2562]: pid.c: Stale PID file, overwriting.
Aug  9 19:42:44 linux pulseaudio[2562]: module-alsa-card.c: Failed to find a working profile.
Aug  9 19:42:44 linux pulseaudio[2562]: module.c: Failed to load  module "module-alsa-card" (argument: "device_id=2 name=pci_14f1_8801 card_name=alsa_card.pci_14f1_8801 tsched=1"): initialization failed.
Aug  9 19:42:46 linux pulseaudio[2562]: main.c: Failed to acquire org.pulseaudio.Server: org.freedesktop.DBus.Error.AccessDenied: Connection ":1.8" is not allowed to own the service "org.pulseaudio.Server" due to security policies in the configuration file
Aug  9 19:42:46 linux smartd[2578]: smartd version 5.38 [i386-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Aug  9 19:42:46 linux smartd[2578]: Home page is http://smartmontools.sourceforge.net/#012
Aug  9 19:42:46 linux smartd[2578]: Opened configuration file /etc/smartd.conf
Aug  9 19:42:46 linux pulseaudio[2562]: alsa-sink.c: Increasing wakeup watermark to 30.00 ms
Aug  9 19:42:46 linux smartd[2578]: Drive: DEVICESCAN, implied '-a' Directive on line 28 of file /etc/smartd.conf
Aug  9 19:42:46 linux smartd[2578]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Aug  9 19:42:46 linux smartd[2578]: Device: /dev/hdc, opened
Aug  9 19:42:46 linux smartd[2578]: Device: /dev/hdc, packet devices [this device CD/DVD] not SMART capable
Aug  9 19:42:46 linux smartd[2578]: Device: /dev/sda, opened
Aug  9 19:42:46 linux smartd[2578]: Device /dev/sda: using '-d sat' for ATA disk behind SAT layer.
Aug  9 19:42:46 linux smartd[2578]: Device: /dev/sda, opened
Aug  9 19:42:46 linux smartd[2578]: Device: /dev/sda, found in smartd database.
Aug  9 19:42:46 linux smartd[2578]: Device: /dev/sda, is SMART capable. Adding to "monitor" list.
Aug  9 19:42:46 linux smartd[2578]: Device: /dev/sdb, opened
Aug  9 19:42:47 linux smartd[2578]: Device /dev/sdb: using '-d sat' for ATA disk behind SAT layer.
Aug  9 19:42:47 linux smartd[2578]: Device: /dev/sdb, opened
Aug  9 19:42:47 linux smartd[2578]: Device: /dev/sdb, found in smartd database.
Aug  9 19:42:47 linux smartd[2578]: Device: /dev/sdb, is SMART capable. Adding to "monitor" list.
Aug  9 19:42:47 linux smartd[2578]: Device: /dev/sdc, opened
Aug  9 19:42:47 linux smartd[2578]: Device /dev/sdc: using '-d sat' for ATA disk behind SAT layer.
Aug  9 19:42:47 linux smartd[2578]: Device: /dev/sdc, opened
Aug  9 19:42:47 linux smartd[2578]: Device: /dev/sdc, found in smartd database.
Aug  9 19:42:47 linux smartd[2578]: Device: /dev/sdc, is SMART capable. Adding to "monitor" list.
Aug  9 19:42:47 linux smartd[2578]: Monitoring 0 ATA and 3 SCSI devices
Aug  9 19:42:48 linux smartd[2580]: smartd has fork()ed into background mode. New PID=2580.
Aug  9 19:42:49 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 30.00 ms
Aug  9 19:42:49 linux pulseaudio[2562]: alsa-sink.c: Increasing wakeup watermark to 40.00 ms
Aug  9 19:42:49 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 40.00 ms
Aug  9 19:42:51 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 50.00 ms
Aug  9 19:42:51 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 60.00 ms
Aug  9 19:42:53 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 70.00 ms
Aug  9 19:42:54 linux pulseaudio[2562]: alsa-sink.c: Increasing wakeup watermark to 50.00 ms
Aug  9 19:42:54 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 80.00 ms
Aug  9 19:42:56 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 90.00 ms
Aug  9 19:42:56 linux kernel: bttv0: PLL can sleep, using XTAL (28636363).
Aug  9 19:42:57 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 100.00 ms
Aug  9 19:42:59 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 110.00 ms
Aug  9 19:43:00 linux acpid: client connected from 2767[0:0]
Aug  9 19:43:01 linux kernel: [drm] Initialized drm 1.1.0 20060810
Aug  9 19:43:01 linux kernel: pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Aug  9 19:43:01 linux kernel: [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Aug  9 19:43:01 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 30.00 ms
Aug  9 19:43:02 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 120.00 ms
Aug  9 19:43:04 linux xinetd[1884]: START: telnet pid=2846 from=::ffff:192.168.1.10
Aug  9 19:43:05 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 130.00 ms
Aug  9 19:43:05 linux pulseaudio[2562]: alsa-sink.c: Increasing wakeup watermark to 60.00 ms
Aug  9 19:43:09 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 140.00 ms
Aug  9 19:43:10 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 150.00 ms
Aug  9 19:43:12 linux gdm-simple-greeter[2980]: WARNING: Unable to query filesystem type for /home/icecast: Error getting filesystem info: No such file or directory
Aug  9 19:43:13 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 160.00 ms
Aug  9 19:43:15 linux pulseaudio[2562]: alsa-sink.c: Increasing wakeup watermark to 70.00 ms
Aug  9 19:43:16 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 170.00 ms
Aug  9 19:43:19 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 180.00 ms
Aug  9 19:43:36 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 190.00 ms
Aug  9 19:44:19 linux kernel: ide-tape: hdd <-> ht0: Seagate STT20000A rev 8A51
Aug  9 19:44:19 linux kernel: ide-tape: hdd <-> ht0: 232KBps, 6*54kB buffer, 400ms tDSC
Aug  9 19:45:30 linux xinetd[1884]: START: tftp pid=4610 from=192.168.1.200
Aug  9 19:46:36 linux ntpd[1892]: synchronized to 4.79.132.217, stratum 2
Aug  9 19:46:36 linux ntpd[1892]: time reset +0.254707 s
Aug  9 19:46:36 linux ntpd[1892]: kernel time sync status change 0001
Aug  9 19:49:47 linux xinetd[1884]: START: telnet pid=8275 from=::ffff:192.168.1.10
Aug  9 19:50:41 linux kernel: Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
Aug  9 19:51:02 linux ntpd[1892]: synchronized to 72.52.190.26, stratum 2
Aug  9 19:56:54 linux kernel: hello
Aug  9 19:56:54 linux kernel: hello jim2
Aug  9 19:56:54 linux kernel: ide-tape: hdd <-> ht0: Seagate STT20000A rev 8A51
Aug  9 19:56:54 linux kernel: ide-tape: hdd <-> ht0: 232KBps, 6*54kB buffer, 400ms tDSC
Aug  9 19:58:19 linux sm-notify[1719]: Unable to notify sharon, giving up
Aug  9 19:58:19 linux Backgrounding to notify hosts...
Aug  9 20:00:04 linux pulseaudio[2562]: alsa-sink.c: Increasing wakeup watermark to 30.00 ms
Aug  9 20:00:30 linux xinetd[1884]: EXIT: tftp status=0 pid=4610 duration=900(sec)
Aug  9 20:06:11 linux dhcpd: DHCPDISCOVER from 00:30:1b:2b:4e:8c via eth1
Aug  9 20:06:11 linux dhcpd: DHCPOFFER on 192.168.1.14 to 00:30:1b:2b:4e:8c via eth1
Aug  9 20:06:13 linux dhcpd: DHCPREQUEST for 192.168.1.14 (192.168.1.254) from 00:30:1b:2b:4e:8c via eth1
Aug  9 20:06:13 linux dhcpd: DHCPACK on 192.168.1.14 to 00:30:1b:2b:4e:8c via eth1
Aug  9 20:06:13 linux xinetd[1884]: START: tftp pid=26744 from=192.168.1.14
Aug  9 20:06:13 linux in.tftpd[26745]: tftp: client does not accept options
Aug  9 20:06:15 linux dhcpd: DHCPDISCOVER from 00:30:1b:2b:4e:8c via eth1
Aug  9 20:06:15 linux dhcpd: DHCPOFFER on 192.168.1.14 to 00:30:1b:2b:4e:8c via eth1
Aug  9 20:06:15 linux dhcpd: DHCPREQUEST for 192.168.1.14 (192.168.1.254) from 00:30:1b:2b:4e:8c via eth1
Aug  9 20:06:15 linux dhcpd: DHCPACK on 192.168.1.14 to 00:30:1b:2b:4e:8c via eth1
Aug  9 20:06:15 linux mountd[1933]: authenticated mount request from 192.168.1.14:952 for /tftpboot/muekow/i386 (/tftpboot/muekow)
Aug  9 20:06:23 linux mountd[1933]: authenticated mount request from 192.168.1.14:915 for /home (/home)
Aug  9 20:06:23 linux mountd[1933]: authenticated mount request from 192.168.1.14:1010 for /media (/media)
Aug  9 20:08:17 linux kernel: hello
Aug  9 20:08:17 linux kernel: hello jim2
Aug  9 20:08:17 linux kernel: ide-tape: hdd <-> ht0: Seagate STT20000A rev 8A51
Aug  9 20:08:17 linux kernel: ide-tape: hdd <-> ht0: 232KBps, 6*54kB buffer, 400ms tDSC
Aug  9 20:12:49 linux smartd[2580]: Device: /dev/sda, SMART Prefailure Attribute: 8 Seek_Time_Performance changed from 248 to 249
Aug  9 20:14:14 linux dhcpd: DHCPDISCOVER from 00:1b:24:b8:68:e2 via eth1
Aug  9 20:14:15 linux dhcpd: DHCPOFFER on 192.168.1.177 to 00:1b:24:b8:68:e2 via eth1
Aug  9 20:14:15 linux dhcpd: DHCPREQUEST for 192.168.1.177 (192.168.1.254) from 00:1b:24:b8:68:e2 via eth1
Aug  9 20:14:15 linux dhcpd: DHCPACK on 192.168.1.177 to 00:1b:24:b8:68:e2 via eth1
Aug  9 20:14:30 linux xinetd[1884]: START: telnet pid=29379 from=::ffff:192.168.1.177
Aug  9 20:17:37 linux xinetd[1884]: START: telnet pid=30948 from=::ffff:192.168.1.177
Aug  9 20:17:57 linux pulseaudio[2562]: alsa-sink.c: Increasing wakeup watermark to 80.00 ms
Aug  9 20:24:02 linux mountd[1933]: authenticated mount request from 192.168.1.177:666 for /media (/media)
Aug  9 20:24:30 linux xinetd[1884]: EXIT: tftp status=0 pid=26744 duration=1097(sec)
Aug  9 20:28:18 linux pulseaudio[2562]: alsa-sink.c: Increasing wakeup watermark to 90.00 ms
Aug  9 20:30:05 linux mountd[1933]: authenticated unmount request from 192.168.1.177:890 for /media (/media)
Aug  9 20:33:30 linux xinetd[1884]: START: tftp pid=9193 from=192.168.1.200
Aug  9 20:38:40 linux kernel: hello
Aug  9 20:38:40 linux kernel: ide-tape: hello jim
Aug  9 20:38:40 linux kernel: hello jim2
Aug  9 20:38:40 linux kernel: ide-tape: sector: 18446744073709551615, nr_sectors: 0
Aug  9 20:38:40 linux kernel: ide-tape: Retry #0, cmd = 12
Aug  9 20:38:40 linux kernel: ide-tape: Enter ide_tape_callback
Aug  9 20:38:40 linux kernel: ide-tape: hdd <-> ht0: Seagate STT20000A rev 8A51
Aug  9 20:38:40 linux kernel: ide-tape: sector: 18446744073709551615, nr_sectors: 0
Aug  9 20:38:40 linux kernel: ide-tape: Retry #0, cmd = 1A
Aug  9 20:38:40 linux kernel: ide-tape: Enter ide_tape_callback
Aug  9 20:38:40 linux kernel: ide-tape: sector: 18446744073709551615, nr_sectors: 0
Aug  9 20:38:40 linux kernel: ide-tape: Retry #0, cmd = 1A
Aug  9 20:38:40 linux kernel: ide-tape: Enter ide_tape_callback
Aug  9 20:38:40 linux kernel: ide-tape: hdd <-> ht0: 232KBps, 6*54kB buffer, 400ms tDSC
Aug  9 20:39:25 linux kernel: ide-tape: Enter idetape_chrdev_open
Aug  9 20:39:25 linux kernel: ide-tape: sector: 18446744073709551615, nr_sectors: 0
Aug  9 20:39:25 linux kernel: ide-tape: Retry #0, cmd = 00
Aug  9 20:39:25 linux kernel: ide-tape: Enter ide_tape_callback
Aug  9 20:39:25 linux kernel: ide-tape: Enter ide_tape_read_position
Aug  9 20:39:25 linux kernel: ide-tape: sector: 18446744073709551615, nr_sectors: 0
Aug  9 20:39:25 linux kernel: ide-tape: Retry #0, cmd = 34
Aug  9 20:39:25 linux kernel: ide-tape: Enter ide_tape_callback
Aug  9 20:39:25 linux kernel: ide-tape: BOP - Yes
Aug  9 20:39:25 linux kernel: ide-tape: EOP - No
Aug  9 20:39:25 linux kernel: ide-tape: Block Location - 0
Aug  9 20:39:25 linux kernel: ide-tape: sector: 18446744073709551615, nr_sectors: 0
Aug  9 20:39:25 linux kernel: ide-tape: Retry #0, cmd = 1A
Aug  9 20:39:25 linux kernel: ide-tape: Enter ide_tape_callback
Aug  9 20:39:25 linux kernel: ide-tape: Enter idetape_chrdev_ioctl, cmd=2149346562
Aug  9 20:39:25 linux kernel: ide-tape: Enter ide_tape_read_position
Aug  9 20:39:25 linux kernel: ide-tape: sector: 18446744073709551615, nr_sectors: 0
Aug  9 20:39:25 linux kernel: ide-tape: Retry #0, cmd = 34
Aug  9 20:39:25 linux kernel: ide-tape: Enter ide_tape_callback
Aug  9 20:39:25 linux kernel: ide-tape: BOP - Yes
Aug  9 20:39:25 linux kernel: ide-tape: EOP - No
Aug  9 20:39:25 linux kernel: ide-tape: Block Location - 0
Aug  9 20:39:25 linux kernel: ide-tape: Enter idetape_chrdev_release
Aug  9 20:39:25 linux kernel: ide-tape: Enter idetape_rewind_tape
Aug  9 20:39:25 linux kernel: ide-tape: sector: 18446744073709551615, nr_sectors: 0
Aug  9 20:39:25 linux kernel: ide-tape: Retry #0, cmd = 01
Aug  9 20:39:25 linux kernel: ide-tape: Enter ide_tape_callback
Aug  9 20:39:25 linux kernel: ide-tape: Enter idetape_postpone_request
Aug  9 20:39:25 linux kernel: ide-tape: Enter ide_tape_read_position
Aug  9 20:39:27 linux kernel: ide-tape: sector: 18446744073709551615, nr_sectors: 0
Aug  9 20:39:27 linux kernel: ide-tape: Retry #0, cmd = 34
Aug  9 20:39:27 linux kernel: ide-tape: Enter ide_tape_callback
Aug  9 20:39:27 linux kernel: ide-tape: BOP - Yes
Aug  9 20:39:27 linux kernel: ide-tape: EOP - No
Aug  9 20:39:27 linux kernel: ide-tape: Block Location - 0
Aug  9 20:40:16 linux kernel: hello
Aug  9 20:40:16 linux kernel: ide-tape: hello jim
Aug  9 20:40:16 linux kernel: hello jim2
Aug  9 20:40:16 linux kernel: ide-tape: sector: 18446744073709551615, nr_sectors: 0
Aug  9 20:40:16 linux kernel: ide-tape: Retry #0, cmd = 12
Aug  9 20:40:16 linux kernel: ide-tape: Enter ide_tape_callback
Aug  9 20:40:16 linux kernel: ide-tape: hdd <-> ht0: Seagate STT20000A rev 8A51
Aug  9 20:40:16 linux kernel: ide-tape: sector: 18446744073709551615, nr_sectors: 0
Aug  9 20:40:16 linux kernel: ide-tape: Retry #0, cmd = 1A
Aug  9 20:40:16 linux kernel: ide-tape: Enter ide_tape_callback
Aug  9 20:40:16 linux kernel: ide-tape: sector: 18446744073709551615, nr_sectors: 0
Aug  9 20:40:16 linux kernel: ide-tape: Retry #0, cmd = 1A
Aug  9 20:40:16 linux kernel: ide-tape: Enter ide_tape_callback
Aug  9 20:40:16 linux kernel: ide-tape: hdd <-> ht0: 232KBps, 6*54kB buffer, 400ms tDSC



--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 7b2032b..81181cd 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -48,7 +48,7 @@ 
 #include <linux/mtio.h>
 
 /* define to see debug info */
-#undef IDETAPE_DEBUG_LOG
+#define IDETAPE_DEBUG_LOG
 
 #ifdef IDETAPE_DEBUG_LOG
 #define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, ## args)
@@ -1727,6 +1727,8 @@  static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
 	int buffer_size;
 	u16 *ctl = (u16 *)&tape->caps[12];
 
+	drive->debug_mask = 0xffffffff;
+
 	ide_debug_log(IDE_DBG_FUNC, "minor: %d", minor);
 
 	drive->pc_callback = ide_tape_callback;