diff mbox

[4/8] PCI: imx6: use new clock names

Message ID 1396025579-14344-5-git-send-email-l.stach@pengutronix.de
State Not Applicable
Headers show

Commit Message

Lucas Stach March 28, 2014, 4:52 p.m. UTC
As defined in the new binding.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/pci/host/pci-imx6.c | 74 ++++++++++++++++++---------------------------
 1 file changed, 29 insertions(+), 45 deletions(-)

Comments

Shawn Guo April 3, 2014, 6:50 a.m. UTC | #1
On Fri, Mar 28, 2014 at 05:52:55PM +0100, Lucas Stach wrote:
> As defined in the new binding.
> 
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> ---
>  drivers/pci/host/pci-imx6.c | 74 ++++++++++++++++++---------------------------
>  1 file changed, 29 insertions(+), 45 deletions(-)
> 
> diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
> index ee082509b0ba..71730bbcd9a2 100644
> --- a/drivers/pci/host/pci-imx6.c
> +++ b/drivers/pci/host/pci-imx6.c
...
> @@ -583,32 +574,25 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)
>  	}
>  
>  	/* Fetch clocks */
> -	imx6_pcie->lvds_gate = devm_clk_get(&pdev->dev, "lvds_gate");
> -	if (IS_ERR(imx6_pcie->lvds_gate)) {
> -		dev_err(&pdev->dev,
> -			"lvds_gate clock select missing or invalid\n");
> -		return PTR_ERR(imx6_pcie->lvds_gate);
> -	}
> -
> -	imx6_pcie->sata_ref_100m = devm_clk_get(&pdev->dev, "sata_ref_100m");
> -	if (IS_ERR(imx6_pcie->sata_ref_100m)) {
> +	imx6_pcie->pcie_phy = devm_clk_get(&pdev->dev, "pcie_phy");
> +	if (IS_ERR(imx6_pcie->pcie_phy)) {

Won't this break the existing DTBs?

Shawn

>  		dev_err(&pdev->dev,
> -			"sata_ref_100m clock source missing or invalid\n");
> -		return PTR_ERR(imx6_pcie->sata_ref_100m);
> +			"pcie_phy clock source missing or invalid\n");
> +		return PTR_ERR(imx6_pcie->pcie_phy);
>  	}
>  
> -	imx6_pcie->pcie_ref_125m = devm_clk_get(&pdev->dev, "pcie_ref_125m");
> -	if (IS_ERR(imx6_pcie->pcie_ref_125m)) {
> +	imx6_pcie->pcie_bus = devm_clk_get(&pdev->dev, "pcie_bus");
> +	if (IS_ERR(imx6_pcie->pcie_bus)) {
>  		dev_err(&pdev->dev,
> -			"pcie_ref_125m clock source missing or invalid\n");
> -		return PTR_ERR(imx6_pcie->pcie_ref_125m);
> +			"pcie_bus clock source missing or invalid\n");
> +		return PTR_ERR(imx6_pcie->pcie_bus);
>  	}
>  
> -	imx6_pcie->pcie_axi = devm_clk_get(&pdev->dev, "pcie_axi");
> -	if (IS_ERR(imx6_pcie->pcie_axi)) {
> +	imx6_pcie->pcie = devm_clk_get(&pdev->dev, "pcie");
> +	if (IS_ERR(imx6_pcie->pcie)) {
>  		dev_err(&pdev->dev,
> -			"pcie_axi clock source missing or invalid\n");
> -		return PTR_ERR(imx6_pcie->pcie_axi);
> +			"pcie clock source missing or invalid\n");
> +		return PTR_ERR(imx6_pcie->pcie);
>  	}
>  
>  	/* Grab GPR config register range */
> -- 
> 1.9.0
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Lucas Stach April 3, 2014, 8:21 a.m. UTC | #2
Hi Shawn,

Am Donnerstag, den 03.04.2014, 14:50 +0800 schrieb Shawn Guo:
> On Fri, Mar 28, 2014 at 05:52:55PM +0100, Lucas Stach wrote:
> > As defined in the new binding.
> > 
> > Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> > ---
> >  drivers/pci/host/pci-imx6.c | 74 ++++++++++++++++++---------------------------
> >  1 file changed, 29 insertions(+), 45 deletions(-)
> > 
> > diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
> > index ee082509b0ba..71730bbcd9a2 100644
> > --- a/drivers/pci/host/pci-imx6.c
> > +++ b/drivers/pci/host/pci-imx6.c
> ...
> > @@ -583,32 +574,25 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)
> >  	}
> >  
> >  	/* Fetch clocks */
> > -	imx6_pcie->lvds_gate = devm_clk_get(&pdev->dev, "lvds_gate");
> > -	if (IS_ERR(imx6_pcie->lvds_gate)) {
> > -		dev_err(&pdev->dev,
> > -			"lvds_gate clock select missing or invalid\n");
> > -		return PTR_ERR(imx6_pcie->lvds_gate);
> > -	}
> > -
> > -	imx6_pcie->sata_ref_100m = devm_clk_get(&pdev->dev, "sata_ref_100m");
> > -	if (IS_ERR(imx6_pcie->sata_ref_100m)) {
> > +	imx6_pcie->pcie_phy = devm_clk_get(&pdev->dev, "pcie_phy");
> > +	if (IS_ERR(imx6_pcie->pcie_phy)) {
> 
> Won't this break the existing DTBs?
> 
Yes, it will. But I think it's justified to break the binding,
considering how much brokenness was in there and the relatively few
number of users right now.

All these patches depend on agreement of the new binding, as laid out in
patch 2/8. I don't think it makes much sense in keeping the old cruft
around given that the old binding was properly reviewed by PCI experts.

Regards,
Lucas
Lucas Stach April 3, 2014, 8:51 a.m. UTC | #3
Am Donnerstag, den 03.04.2014, 10:21 +0200 schrieb Lucas Stach:
> Hi Shawn,
> 
> Am Donnerstag, den 03.04.2014, 14:50 +0800 schrieb Shawn Guo:
> > On Fri, Mar 28, 2014 at 05:52:55PM +0100, Lucas Stach wrote:
> > > As defined in the new binding.
> > > 
> > > Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> > > ---
> > >  drivers/pci/host/pci-imx6.c | 74 ++++++++++++++++++---------------------------
> > >  1 file changed, 29 insertions(+), 45 deletions(-)
> > > 
> > > diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
> > > index ee082509b0ba..71730bbcd9a2 100644
> > > --- a/drivers/pci/host/pci-imx6.c
> > > +++ b/drivers/pci/host/pci-imx6.c
> > ...
> > > @@ -583,32 +574,25 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)
> > >  	}
> > >  
> > >  	/* Fetch clocks */
> > > -	imx6_pcie->lvds_gate = devm_clk_get(&pdev->dev, "lvds_gate");
> > > -	if (IS_ERR(imx6_pcie->lvds_gate)) {
> > > -		dev_err(&pdev->dev,
> > > -			"lvds_gate clock select missing or invalid\n");
> > > -		return PTR_ERR(imx6_pcie->lvds_gate);
> > > -	}
> > > -
> > > -	imx6_pcie->sata_ref_100m = devm_clk_get(&pdev->dev, "sata_ref_100m");
> > > -	if (IS_ERR(imx6_pcie->sata_ref_100m)) {
> > > +	imx6_pcie->pcie_phy = devm_clk_get(&pdev->dev, "pcie_phy");
> > > +	if (IS_ERR(imx6_pcie->pcie_phy)) {
> > 
> > Won't this break the existing DTBs?
> > 
> Yes, it will. But I think it's justified to break the binding,
> considering how much brokenness was in there and the relatively few
> number of users right now.
> 
> All these patches depend on agreement of the new binding, as laid out in
> patch 2/8. I don't think it makes much sense in keeping the old cruft
> around given that the old binding was properly reviewed by PCI experts.
                                    ^ wasn't (obviously)
> 
> Regards,
> Lucas
diff mbox

Patch

diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
index ee082509b0ba..71730bbcd9a2 100644
--- a/drivers/pci/host/pci-imx6.c
+++ b/drivers/pci/host/pci-imx6.c
@@ -35,10 +35,9 @@  struct imx6_pcie {
 	int			power_on_gpio;
 	int			wake_up_gpio;
 	int			disable_gpio;
-	struct clk		*lvds_gate;
-	struct clk		*sata_ref_100m;
-	struct clk		*pcie_ref_125m;
-	struct clk		*pcie_axi;
+	struct clk		*pcie_bus;
+	struct clk		*pcie_phy;
+	struct clk		*pcie;
 	struct pcie_port	pp;
 	struct regmap		*iomuxc_gpr;
 	void __iomem		*mem_base;
@@ -239,28 +238,22 @@  static int imx6_pcie_deassert_core_reset(struct pcie_port *pp)
 	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
 			IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
 
-	ret = clk_prepare_enable(imx6_pcie->sata_ref_100m);
+	ret = clk_prepare_enable(imx6_pcie->pcie_phy);
 	if (ret) {
-		dev_err(pp->dev, "unable to enable sata_ref_100m\n");
-		goto err_sata_ref;
+		dev_err(pp->dev, "unable to enable pcie_phy clock\n");
+		goto err_pcie_phy;
 	}
 
-	ret = clk_prepare_enable(imx6_pcie->pcie_ref_125m);
+	ret = clk_prepare_enable(imx6_pcie->pcie_bus);
 	if (ret) {
-		dev_err(pp->dev, "unable to enable pcie_ref_125m\n");
-		goto err_pcie_ref;
+		dev_err(pp->dev, "unable to enable pcie_bus clock\n");
+		goto err_pcie_bus;
 	}
 
-	ret = clk_prepare_enable(imx6_pcie->lvds_gate);
+	ret = clk_prepare_enable(imx6_pcie->pcie);
 	if (ret) {
-		dev_err(pp->dev, "unable to enable lvds_gate\n");
-		goto err_lvds_gate;
-	}
-
-	ret = clk_prepare_enable(imx6_pcie->pcie_axi);
-	if (ret) {
-		dev_err(pp->dev, "unable to enable pcie_axi\n");
-		goto err_pcie_axi;
+		dev_err(pp->dev, "unable to enable pcie clock\n");
+		goto err_pcie;
 	}
 
 	/* allow the clocks to stabilize */
@@ -274,13 +267,11 @@  static int imx6_pcie_deassert_core_reset(struct pcie_port *pp)
 	}
 	return 0;
 
-err_pcie_axi:
-	clk_disable_unprepare(imx6_pcie->lvds_gate);
-err_lvds_gate:
-	clk_disable_unprepare(imx6_pcie->pcie_ref_125m);
-err_pcie_ref:
-	clk_disable_unprepare(imx6_pcie->sata_ref_100m);
-err_sata_ref:
+err_pcie:
+	clk_disable_unprepare(imx6_pcie->pcie_bus);
+err_pcie_bus:
+	clk_disable_unprepare(imx6_pcie->pcie_phy);
+err_pcie_phy:
 	return ret;
 
 }
@@ -583,32 +574,25 @@  static int __init imx6_pcie_probe(struct platform_device *pdev)
 	}
 
 	/* Fetch clocks */
-	imx6_pcie->lvds_gate = devm_clk_get(&pdev->dev, "lvds_gate");
-	if (IS_ERR(imx6_pcie->lvds_gate)) {
-		dev_err(&pdev->dev,
-			"lvds_gate clock select missing or invalid\n");
-		return PTR_ERR(imx6_pcie->lvds_gate);
-	}
-
-	imx6_pcie->sata_ref_100m = devm_clk_get(&pdev->dev, "sata_ref_100m");
-	if (IS_ERR(imx6_pcie->sata_ref_100m)) {
+	imx6_pcie->pcie_phy = devm_clk_get(&pdev->dev, "pcie_phy");
+	if (IS_ERR(imx6_pcie->pcie_phy)) {
 		dev_err(&pdev->dev,
-			"sata_ref_100m clock source missing or invalid\n");
-		return PTR_ERR(imx6_pcie->sata_ref_100m);
+			"pcie_phy clock source missing or invalid\n");
+		return PTR_ERR(imx6_pcie->pcie_phy);
 	}
 
-	imx6_pcie->pcie_ref_125m = devm_clk_get(&pdev->dev, "pcie_ref_125m");
-	if (IS_ERR(imx6_pcie->pcie_ref_125m)) {
+	imx6_pcie->pcie_bus = devm_clk_get(&pdev->dev, "pcie_bus");
+	if (IS_ERR(imx6_pcie->pcie_bus)) {
 		dev_err(&pdev->dev,
-			"pcie_ref_125m clock source missing or invalid\n");
-		return PTR_ERR(imx6_pcie->pcie_ref_125m);
+			"pcie_bus clock source missing or invalid\n");
+		return PTR_ERR(imx6_pcie->pcie_bus);
 	}
 
-	imx6_pcie->pcie_axi = devm_clk_get(&pdev->dev, "pcie_axi");
-	if (IS_ERR(imx6_pcie->pcie_axi)) {
+	imx6_pcie->pcie = devm_clk_get(&pdev->dev, "pcie");
+	if (IS_ERR(imx6_pcie->pcie)) {
 		dev_err(&pdev->dev,
-			"pcie_axi clock source missing or invalid\n");
-		return PTR_ERR(imx6_pcie->pcie_axi);
+			"pcie clock source missing or invalid\n");
+		return PTR_ERR(imx6_pcie->pcie);
 	}
 
 	/* Grab GPR config register range */