Message ID | 1395235784-14034-1-git-send-email-LW@KARO-electronics.de |
---|---|
State | New |
Headers | show |
On Wed, Mar 19, 2014 at 02:29:44PM +0100, Lothar Waßmann wrote: > This patch adds support for the Ka-Ro electronics GmbH TX6 modules. > There are five distinct module types with either i.MX6Q or i.MX6DL and > LVDS or LCD display interface and one DTS file for a complete system > with an i.MX6DL based TX6 module and a baseboard mounted on the back > of a display (imx6dl-tx6dl-comtft.dts). > > Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> > --- > arch/arm/boot/dts/Makefile | 6 + > arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts | 114 +++++ > arch/arm/boot/dts/imx6dl-tx6u-801x.dts | 188 ++++++++ > arch/arm/boot/dts/imx6dl-tx6u-811x.dts | 166 +++++++ > arch/arm/boot/dts/imx6q-tx6q-1010.dts | 192 +++++++++ > arch/arm/boot/dts/imx6q-tx6q-1020.dts | 192 +++++++++ > arch/arm/boot/dts/imx6q-tx6q-1110.dts | 174 ++++++++ > arch/arm/boot/dts/imx6qdl-tx6.dtsi | 672 +++++++++++++++++++++++++++++ > 8 files changed, 1704 insertions(+) > create mode 100644 arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts > create mode 100644 arch/arm/boot/dts/imx6dl-tx6u-801x.dts > create mode 100644 arch/arm/boot/dts/imx6dl-tx6u-811x.dts > create mode 100644 arch/arm/boot/dts/imx6q-tx6q-1010.dts > create mode 100644 arch/arm/boot/dts/imx6q-tx6q-1020.dts > create mode 100644 arch/arm/boot/dts/imx6q-tx6q-1110.dts > create mode 100644 arch/arm/boot/dts/imx6qdl-tx6.dtsi > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index cf6c523..358684f 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -198,6 +198,9 @@ dtb-$(CONFIG_ARCH_MXC) += \ > imx6dl-sabreauto.dtb \ > imx6dl-sabrelite.dtb \ > imx6dl-sabresd.dtb \ > + imx6dl-tx6dl-comtft.dtb \ > + imx6dl-tx6u-801x.dtb \ > + imx6dl-tx6u-811x.dtb \ > imx6dl-wandboard.dtb \ > imx6q-arm2.dtb \ > imx6q-cm-fx6.dtb \ > @@ -218,6 +221,9 @@ dtb-$(CONFIG_ARCH_MXC) += \ > imx6q-sbc6x.dtb \ > imx6q-udoo.dtb \ > imx6q-wandboard.dtb \ > + imx6q-tx6q-1010.dtb \ > + imx6q-tx6q-1020.dtb \ > + imx6q-tx6q-1110.dtb \ > imx6sl-evk.dtb \ > vf610-cosmic.dtb \ > vf610-twr.dtb > diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts > new file mode 100644 > index 0000000..6df5a25 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts > @@ -0,0 +1,114 @@ > +/* > + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +/dts-v1/; > +#include "imx6dl.dtsi" > +#include "imx6qdl-tx6.dtsi" > + > +/ { > + model = "Ka-Ro electronics TX6DL Module on CoMpact TFT"; > + compatible = "fsl,imx6dl-tx6dl", "fsl,imx6dl"; Shouldn't it be "karo,imx6dl-tx6dl" instead? > + > + aliases { > + display = &display; > + }; > + > + backlight: backlight { > + compatible = "pwm-backlight"; > + pwms = <&pwm2 0 500000 0>; > + power-supply = <®_3v3>; > + /* > + * a poor man's way to create a 1:1 relationship between > + * the PWM value and the actual duty cycle > + */ > + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 > + 10 11 12 13 14 15 16 17 18 19 > + 20 21 22 23 24 25 26 27 28 29 > + 30 31 32 33 34 35 36 37 38 39 > + 40 41 42 43 44 45 46 47 48 49 > + 50 51 52 53 54 55 56 57 58 59 > + 60 61 62 63 64 65 66 67 68 69 > + 70 71 72 73 74 75 76 77 78 79 > + 80 81 82 83 84 85 86 87 88 89 > + 90 91 92 93 94 95 96 97 98 99 > + 100>; > + default-brightness-level = <50>; > + }; > + > + display: display@di0 { > + compatible = "fsl,imx-parallel-display"; > + interface-pix-fmt = "rgb24"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_disp0_1>; > + status = "okay"; > + > + port { > + display0_in: endpoint { > + remote-endpoint = <&ipu1_di0_disp0>; > + }; > + }; I do not have OF graph stuff in my tree yet. > + > + display-timings { > + native-mode = <&ET070001DM6>; > + > + ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */ > + clock-frequency = <33264000>; > + hactive = <800>; > + vactive = <480>; > + hback-porch = <88>; > + hsync-len = <128>; > + hfront-porch = <40>; > + vback-porch = <33>; > + vsync-len = <2>; > + vfront-porch = <10>; > + hsync-active = <0>; > + vsync-active = <0>; > + de-active = <1>; > + pixelclk-active = <1>; > + }; > + }; > + }; > + > + panel { > + compatible = "simple-panel"; > + power-supply = <®_lcd1_pwr>; > + enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; > + backlight = <&backlight>; > + }; > +}; > + > +&can1 { > + status = "disabled"; > +}; > + > +&can2 { > + xceiver-supply = <®_3v3>; > +}; > + > +&ipu1_di0_disp0 { > + remote-endpoint = <&display0_in>; > +}; > + > +&kpp { > + status = "disabled"; > +}; > + > +®_can_xcvr { > + status = "disabled"; > +}; > + > +®_lcd1_pwr { > + status = "okay"; > +}; > + > +&touchscreen { > + status = "disabled"; > +}; > diff --git a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts > new file mode 100644 > index 0000000..25413f69 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts > @@ -0,0 +1,188 @@ > +/* > + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +/dts-v1/; > +#include "imx6dl.dtsi" > +#include "imx6qdl-tx6.dtsi" > + > +/ { > + model = "Ka-Ro electronics TX6U-801x Module"; > + compatible = "fsl,imx6dl-tx6dl", "fsl,imx6dl"; > + > + aliases { > + display = &display; > + }; > + > + backlight: backlight { > + compatible = "pwm-backlight"; > + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; > + power-supply = <®_3v3>; > + /* > + * a poor man's way to create a 1:1 relationship between > + * the PWM value and the actual duty cycle > + */ > + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 > + 10 11 12 13 14 15 16 17 18 19 > + 20 21 22 23 24 25 26 27 28 29 > + 30 31 32 33 34 35 36 37 38 39 > + 40 41 42 43 44 45 46 47 48 49 > + 50 51 52 53 54 55 56 57 58 59 > + 60 61 62 63 64 65 66 67 68 69 > + 70 71 72 73 74 75 76 77 78 79 > + 80 81 82 83 84 85 86 87 88 89 > + 90 91 92 93 94 95 96 97 98 99 > + 100>; > + default-brightness-level = <50>; > + }; > + > + display: display@di0 { > + compatible = "fsl,imx-parallel-display"; > + interface-pix-fmt = "rgb24"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_disp0_1>; > + status = "okay"; > + > + port { > + display0_in: endpoint { > + remote-endpoint = <&ipu1_di0_disp0>; > + }; > + }; > + > + display-timings { > + VGA { > + clock-frequency = <25200000>; > + hactive = <640>; > + vactive = <480>; > + hback-porch = <48>; > + hsync-len = <96>; > + hfront-porch = <16>; > + vback-porch = <31>; > + vsync-len = <2>; > + vfront-porch = <12>; > + hsync-active = <0>; > + vsync-active = <0>; > + de-active = <1>; > + pixelclk-active = <0>; > + }; > + > + ETV570 { > + clock-frequency = <25200000>; > + hactive = <640>; > + vactive = <480>; > + hback-porch = <114>; > + hsync-len = <30>; > + hfront-porch = <16>; > + vback-porch = <32>; > + vsync-len = <3>; > + vfront-porch = <10>; > + hsync-active = <0>; > + vsync-active = <0>; > + de-active = <1>; > + pixelclk-active = <0>; > + }; > + > + ET0350 { > + clock-frequency = <6413760>; > + hactive = <320>; > + vactive = <240>; > + hback-porch = <34>; > + hsync-len = <34>; > + hfront-porch = <20>; > + vback-porch = <15>; > + vsync-len = <3>; > + vfront-porch = <4>; > + hsync-active = <0>; > + vsync-active = <0>; > + de-active = <1>; > + pixelclk-active = <0>; > + }; > + > + ET0430 { > + clock-frequency = <9009000>; > + hactive = <480>; > + vactive = <272>; > + hback-porch = <2>; > + hsync-len = <41>; > + hfront-porch = <2>; > + vback-porch = <2>; > + vsync-len = <10>; > + vfront-porch = <2>; > + hsync-active = <0>; > + vsync-active = <0>; > + de-active = <1>; > + pixelclk-active = <1>; > + }; > + > + ET0500 { > + clock-frequency = <33264000>; > + hactive = <800>; > + vactive = <480>; > + hback-porch = <88>; > + hsync-len = <128>; > + hfront-porch = <40>; > + vback-porch = <33>; > + vsync-len = <2>; > + vfront-porch = <10>; > + hsync-active = <0>; > + vsync-active = <0>; > + de-active = <1>; > + pixelclk-active = <0>; > + }; > + > + ET0700 { /* same as ET0500 */ > + clock-frequency = <33264000>; > + hactive = <800>; > + vactive = <480>; > + hback-porch = <88>; > + hsync-len = <128>; > + hfront-porch = <40>; > + vback-porch = <33>; > + vsync-len = <2>; > + vfront-porch = <10>; > + hsync-active = <0>; > + vsync-active = <0>; > + de-active = <1>; > + pixelclk-active = <0>; > + }; > + > + ETQ570 { > + clock-frequency = <6596040>; > + hactive = <320>; > + vactive = <240>; > + hback-porch = <38>; > + hsync-len = <30>; > + hfront-porch = <30>; > + vback-porch = <16>; > + vsync-len = <3>; > + vfront-porch = <4>; > + hsync-active = <0>; > + vsync-active = <0>; > + de-active = <1>; > + pixelclk-active = <0>; > + }; > + }; > + }; > + > + panel { > + compatible = "simple-panel"; > + power-supply = <®_lcd1_pwr>; > + enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; > + backlight = <&backlight>; > + }; > +}; > + > +&ipu1_di0_disp0 { > + remote-endpoint = <&display0_in>; > +}; > + > +®_lcd1_pwr { > + status = "okay"; > +}; > diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts > new file mode 100644 > index 0000000..c97fb42 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts > @@ -0,0 +1,166 @@ > +/* > + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +/dts-v1/; > +#include "imx6dl.dtsi" > +#include "imx6qdl-tx6.dtsi" > + > +/ { > + model = "Ka-Ro electronics TX6U-811x Module"; > + compatible = "fsl,imx6dl-tx6dl", "fsl,imx6dl"; > + > + aliases { > + display = &lvds0; > + lvds0 = &lvds0; > + lvds1 = &lvds1; > + }; > + > + backlight0: backlight0 { > + compatible = "pwm-backlight"; > + pwms = <&pwm2 0 500000 0>; > + power-supply = <®_lcd0_pwr>; > + /* > + * a poor man's way to create a 1:1 relationship between > + * the PWM value and the actual duty cycle > + */ > + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 > + 10 11 12 13 14 15 16 17 18 19 > + 20 21 22 23 24 25 26 27 28 29 > + 30 31 32 33 34 35 36 37 38 39 > + 40 41 42 43 44 45 46 47 48 49 > + 50 51 52 53 54 55 56 57 58 59 > + 60 61 62 63 64 65 66 67 68 69 > + 70 71 72 73 74 75 76 77 78 79 > + 80 81 82 83 84 85 86 87 88 89 > + 90 91 92 93 94 95 96 97 98 99 > + 100>; > + default-brightness-level = <50>; > + }; > + > + backlight1: backlight1 { > + compatible = "pwm-backlight"; > + pwms = <&pwm1 0 500000 0>; > + power-supply = <®_lcd1_pwr>; > + /* > + * a poor man's way to create a 1:1 relationship between > + * the PWM value and the actual duty cycle > + */ > + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 > + 10 11 12 13 14 15 16 17 18 19 > + 20 21 22 23 24 25 26 27 28 29 > + 30 31 32 33 34 35 36 37 38 39 > + 40 41 42 43 44 45 46 47 48 49 > + 50 51 52 53 54 55 56 57 58 59 > + 60 61 62 63 64 65 66 67 68 69 > + 70 71 72 73 74 75 76 77 78 79 > + 80 81 82 83 84 85 86 87 88 89 > + 90 91 92 93 94 95 96 97 98 99 > + 100>; > + default-brightness-level = <50>; > + }; > + > + panel0 { The convention of device tree node is node-name@unit-address, so in this case it should probably be panel@0. > + compatible = "simple-panel"; > + power-supply = <®_3v3>; > + backlight = <&backlight0>; > + }; > + > + panel1 { > + compatible = "simple-panel"; > + power-supply = <®_3v3>; > + backlight = <&backlight1>; > + }; > +}; > + > +&i2c3 { > + polytouch2: eeti@04 { > + compatible = "eeti,egalax_ts"; > + reg = <0x04>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_eeti>; > + interrupt-parent = <&gpio3>; > + interrupts = <22 0>; > + wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; > + linux,wakeup; > + }; > +}; > + > +&iomuxc { > + imx6dl-tx6u-811x { > + pinctrl_eeti: eetigrp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ > + >; > + }; > + }; > +}; > + > +&kpp { > + status = "disabled"; /* clashes with backlight1 PWM */ > +}; > + > +&ldb { > + status = "okay"; > + > + lvds0: lvds-channel@0 { > + fsl,data-mapping = "spwg"; > + fsl,data-width = <18>; > + status = "okay"; > + > + display-timings { > + native-mode = <&lvds_timing0>; > + lvds_timing0: hsd100pxn1 { > + clock-frequency = <65000000>; > + hactive = <1024>; > + vactive = <768>; > + hback-porch = <220>; > + hfront-porch = <40>; > + vback-porch = <21>; > + vfront-porch = <7>; > + hsync-len = <60>; > + vsync-len = <10>; > + de-active = <1>; > + pixelclk-active = <1>; > + }; > + }; > + }; > + > + lvds1: lvds-channel@1 { > + fsl,data-mapping = "spwg"; > + fsl,data-width = <18>; > + status = "okay"; > + > + display-timings { > + native-mode = <&lvds_timing1>; > + lvds_timing1: hsd100pxn1 { > + clock-frequency = <65000000>; > + hactive = <1024>; > + vactive = <768>; > + hback-porch = <220>; > + hfront-porch = <40>; > + vback-porch = <21>; > + vfront-porch = <7>; > + hsync-len = <60>; > + vsync-len = <10>; > + de-active = <1>; > + pixelclk-active = <1>; > + }; > + }; > + }; > +}; > + > +®_lcd0_pwr { > + status = "okay"; > +}; > + > +®_lcd1_pwr { > + status = "okay"; > +}; > diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts > new file mode 100644 > index 0000000..6a37c73 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6q-tx6q-1010.dts > @@ -0,0 +1,192 @@ > +/* > + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +/dts-v1/; > +#include "imx6q.dtsi" > +#include "imx6qdl-tx6.dtsi" > + > +/ { > + model = "Ka-Ro electronics TX6Q-1010 Module"; > + compatible = "fsl,imx6q-tx6q", "fsl,imx6q"; > + > + aliases { > + display = &display; > + }; > + > + backlight: backlight { > + compatible = "pwm-backlight"; > + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; > + power-supply = <®_3v3>; > + /* > + * a poor man's way to create a 1:1 relationship between > + * the PWM value and the actual duty cycle > + */ > + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 > + 10 11 12 13 14 15 16 17 18 19 > + 20 21 22 23 24 25 26 27 28 29 > + 30 31 32 33 34 35 36 37 38 39 > + 40 41 42 43 44 45 46 47 48 49 > + 50 51 52 53 54 55 56 57 58 59 > + 60 61 62 63 64 65 66 67 68 69 > + 70 71 72 73 74 75 76 77 78 79 > + 80 81 82 83 84 85 86 87 88 89 > + 90 91 92 93 94 95 96 97 98 99 > + 100>; > + default-brightness-level = <50>; > + }; > + > + display: display@di0 { > + compatible = "fsl,imx-parallel-display"; > + interface-pix-fmt = "rgb24"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_disp0_1>; > + status = "okay"; > + > + port { > + display0_in: endpoint { > + remote-endpoint = <&ipu1_di0_disp0>; > + }; > + }; > + > + display-timings { > + VGA { > + clock-frequency = <25200000>; > + hactive = <640>; > + vactive = <480>; > + hback-porch = <48>; > + hsync-len = <96>; > + hfront-porch = <16>; > + vback-porch = <31>; > + vsync-len = <2>; > + vfront-porch = <12>; > + hsync-active = <0>; > + vsync-active = <0>; > + de-active = <1>; > + pixelclk-active = <0>; > + }; > + > + ETV570 { > + clock-frequency = <25200000>; > + hactive = <640>; > + vactive = <480>; > + hback-porch = <114>; > + hsync-len = <30>; > + hfront-porch = <16>; > + vback-porch = <32>; > + vsync-len = <3>; > + vfront-porch = <10>; > + hsync-active = <0>; > + vsync-active = <0>; > + de-active = <1>; > + pixelclk-active = <0>; > + }; > + > + ET0350 { > + clock-frequency = <6413760>; > + hactive = <320>; > + vactive = <240>; > + hback-porch = <34>; > + hsync-len = <34>; > + hfront-porch = <20>; > + vback-porch = <15>; > + vsync-len = <3>; > + vfront-porch = <4>; > + hsync-active = <0>; > + vsync-active = <0>; > + de-active = <1>; > + pixelclk-active = <0>; > + }; > + > + ET0430 { > + clock-frequency = <9009000>; > + hactive = <480>; > + vactive = <272>; > + hback-porch = <2>; > + hsync-len = <41>; > + hfront-porch = <2>; > + vback-porch = <2>; > + vsync-len = <10>; > + vfront-porch = <2>; > + hsync-active = <0>; > + vsync-active = <0>; > + de-active = <1>; > + pixelclk-active = <1>; > + }; > + > + ET0500 { > + clock-frequency = <33264000>; > + hactive = <800>; > + vactive = <480>; > + hback-porch = <88>; > + hsync-len = <128>; > + hfront-porch = <40>; > + vback-porch = <33>; > + vsync-len = <2>; > + vfront-porch = <10>; > + hsync-active = <0>; > + vsync-active = <0>; > + de-active = <1>; > + pixelclk-active = <0>; > + }; > + > + ET0700 { /* same as ET0500 */ > + clock-frequency = <33264000>; > + hactive = <800>; > + vactive = <480>; > + hback-porch = <88>; > + hsync-len = <128>; > + hfront-porch = <40>; > + vback-porch = <33>; > + vsync-len = <2>; > + vfront-porch = <10>; > + hsync-active = <0>; > + vsync-active = <0>; > + de-active = <1>; > + pixelclk-active = <0>; > + }; > + > + ETQ570 { > + clock-frequency = <6596040>; > + hactive = <320>; > + vactive = <240>; > + hback-porch = <38>; > + hsync-len = <30>; > + hfront-porch = <30>; > + vback-porch = <16>; > + vsync-len = <3>; > + vfront-porch = <4>; > + hsync-active = <0>; > + vsync-active = <0>; > + de-active = <1>; > + pixelclk-active = <0>; > + }; > + }; > + }; > + > + panel { > + compatible = "simple-panel"; > + power-supply = <®_lcd1_pwr>; > + enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; > + backlight = <&backlight>; > + }; > +}; > + > +&ipu1_di0_disp0 { > + remote-endpoint = <&display0_in>; > +}; > + > +&ipu2 { > + status = "disabled"; > +}; > + > +®_lcd1_pwr { > + status = "okay"; > +}; > diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/imx6q-tx6q-1020.dts > new file mode 100644 > index 0000000..9fc71b4 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6q-tx6q-1020.dts > @@ -0,0 +1,192 @@ > +/* > + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +/dts-v1/; > +#include "imx6q.dtsi" > +#include "imx6qdl-tx6.dtsi" > + > +/ { > + model = "Ka-Ro electronics TX6Q-1020 Module"; > + compatible = "fsl,imx6q-tx6q", "fsl,imx6q"; > + > + aliases { > + display = &display; > + }; > + > + backlight: backlight { > + compatible = "pwm-backlight"; > + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; > + power-supply = <®_3v3>; > + /* > + * a poor man's way to create a 1:1 relationship between > + * the PWM value and the actual duty cycle > + */ > + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 > + 10 11 12 13 14 15 16 17 18 19 > + 20 21 22 23 24 25 26 27 28 29 > + 30 31 32 33 34 35 36 37 38 39 > + 40 41 42 43 44 45 46 47 48 49 > + 50 51 52 53 54 55 56 57 58 59 > + 60 61 62 63 64 65 66 67 68 69 > + 70 71 72 73 74 75 76 77 78 79 > + 80 81 82 83 84 85 86 87 88 89 > + 90 91 92 93 94 95 96 97 98 99 > + 100>; > + default-brightness-level = <50>; > + }; > + > + display: display@di0 { > + compatible = "fsl,imx-parallel-display"; > + interface-pix-fmt = "rgb24"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_disp0_1>; > + status = "okay"; > + > + port { > + display0_in: endpoint { > + remote-endpoint = <&ipu1_di0_disp0>; > + }; > + }; > + > + display-timings { > + VGA { > + clock-frequency = <25200000>; > + hactive = <640>; > + vactive = <480>; > + hback-porch = <48>; > + hsync-len = <96>; > + hfront-porch = <16>; > + vback-porch = <31>; > + vsync-len = <2>; > + vfront-porch = <12>; > + hsync-active = <0>; > + vsync-active = <0>; > + de-active = <1>; > + pixelclk-active = <0>; > + }; > + > + ETV570 { > + clock-frequency = <25200000>; > + hactive = <640>; > + vactive = <480>; > + hback-porch = <114>; > + hsync-len = <30>; > + hfront-porch = <16>; > + vback-porch = <32>; > + vsync-len = <3>; > + vfront-porch = <10>; > + hsync-active = <0>; > + vsync-active = <0>; > + de-active = <1>; > + pixelclk-active = <0>; > + }; > + > + ET0350 { > + clock-frequency = <6413760>; > + hactive = <320>; > + vactive = <240>; > + hback-porch = <34>; > + hsync-len = <34>; > + hfront-porch = <20>; > + vback-porch = <15>; > + vsync-len = <3>; > + vfront-porch = <4>; > + hsync-active = <0>; > + vsync-active = <0>; > + de-active = <1>; > + pixelclk-active = <0>; > + }; > + > + ET0430 { > + clock-frequency = <9009000>; > + hactive = <480>; > + vactive = <272>; > + hback-porch = <2>; > + hsync-len = <41>; > + hfront-porch = <2>; > + vback-porch = <2>; > + vsync-len = <10>; > + vfront-porch = <2>; > + hsync-active = <0>; > + vsync-active = <0>; > + de-active = <1>; > + pixelclk-active = <1>; > + }; > + > + ET0500 { > + clock-frequency = <33264000>; > + hactive = <800>; > + vactive = <480>; > + hback-porch = <88>; > + hsync-len = <128>; > + hfront-porch = <40>; > + vback-porch = <33>; > + vsync-len = <2>; > + vfront-porch = <10>; > + hsync-active = <0>; > + vsync-active = <0>; > + de-active = <1>; > + pixelclk-active = <0>; > + }; > + > + ET0700 { /* same as ET0500 */ > + clock-frequency = <33264000>; > + hactive = <800>; > + vactive = <480>; > + hback-porch = <88>; > + hsync-len = <128>; > + hfront-porch = <40>; > + vback-porch = <33>; > + vsync-len = <2>; > + vfront-porch = <10>; > + hsync-active = <0>; > + vsync-active = <0>; > + de-active = <1>; > + pixelclk-active = <0>; > + }; > + > + ETQ570 { > + clock-frequency = <6596040>; > + hactive = <320>; > + vactive = <240>; > + hback-porch = <38>; > + hsync-len = <30>; > + hfront-porch = <30>; > + vback-porch = <16>; > + vsync-len = <3>; > + vfront-porch = <4>; > + hsync-active = <0>; > + vsync-active = <0>; > + de-active = <1>; > + pixelclk-active = <0>; > + }; > + }; > + }; > + > + panel { > + compatible = "simple-panel"; > + power-supply = <®_lcd1_pwr>; > + enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; > + backlight = <&backlight>; > + }; > +}; > + > +&gpmi { > + status = "disabled"; > +}; > + > +&ipu1_di0_disp0 { > + remote-endpoint = <&display0_in>; > +}; > + > +®_lcd1_pwr { > + status = "okay"; > +}; > diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts > new file mode 100644 > index 0000000..60b2e0e > --- /dev/null > +++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts > @@ -0,0 +1,174 @@ > +/* > + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +/dts-v1/; > +#include "imx6q.dtsi" > +#include "imx6qdl-tx6.dtsi" > + > +/ { > + model = "Ka-Ro electronics TX6Q-1110 Module"; > + compatible = "fsl,imx6q-tx6q", "fsl,imx6q"; > + > + aliases { > + display = &lvds0; > + lvds0 = &lvds0; > + lvds1 = &lvds1; > + }; > + > + backlight0: backlight0 { > + compatible = "pwm-backlight"; > + pwms = <&pwm2 0 500000 0>; > + power-supply = <®_lcd0_pwr>; > + /* > + * a poor man's way to create a 1:1 relationship between > + * the PWM value and the actual duty cycle > + */ > + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 > + 10 11 12 13 14 15 16 17 18 19 > + 20 21 22 23 24 25 26 27 28 29 > + 30 31 32 33 34 35 36 37 38 39 > + 40 41 42 43 44 45 46 47 48 49 > + 50 51 52 53 54 55 56 57 58 59 > + 60 61 62 63 64 65 66 67 68 69 > + 70 71 72 73 74 75 76 77 78 79 > + 80 81 82 83 84 85 86 87 88 89 > + 90 91 92 93 94 95 96 97 98 99 > + 100>; > + default-brightness-level = <50>; > + }; > + > + backlight1: backlight1 { > + compatible = "pwm-backlight"; > + pwms = <&pwm1 0 500000 0>; > + power-supply = <®_lcd1_pwr>; > + /* > + * a poor man's way to create a 1:1 relationship between > + * the PWM value and the actual duty cycle > + */ > + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 > + 10 11 12 13 14 15 16 17 18 19 > + 20 21 22 23 24 25 26 27 28 29 > + 30 31 32 33 34 35 36 37 38 39 > + 40 41 42 43 44 45 46 47 48 49 > + 50 51 52 53 54 55 56 57 58 59 > + 60 61 62 63 64 65 66 67 68 69 > + 70 71 72 73 74 75 76 77 78 79 > + 80 81 82 83 84 85 86 87 88 89 > + 90 91 92 93 94 95 96 97 98 99 > + 100>; > + default-brightness-level = <50>; > + }; > + > + panel0 { > + compatible = "simple-panel"; > + power-supply = <®_3v3>; > + backlight = <&backlight0>; > + }; > + > + panel1 { > + compatible = "simple-panel"; > + power-supply = <®_3v3>; > + backlight = <&backlight1>; > + }; > +}; > + > +&i2c3 { > + polytouch2: eeti@04 { > + compatible = "eeti,egalax_ts"; > + reg = <0x04>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_eeti>; > + interrupt-parent = <&gpio3>; > + interrupts = <22 0>; > + wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; > + linux,wakeup; > + }; > +}; > + > +&iomuxc { > + imx6q-tx6q-1110 { > + pinctrl_eeti: eetigrp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ > + >; > + }; > + }; > +}; > + > +&ipu2 { > + status = "disabled"; > +}; > + > +&kpp { > + status = "disabled"; /* clashes with backlight1 PWM */ > +}; > + > +&ldb { > + status = "okay"; > + > + lvds0: lvds-channel@0 { > + fsl,data-mapping = "spwg"; > + fsl,data-width = <18>; > + status = "okay"; > + > + display-timings { > + native-mode = <&lvds_timing0>; > + lvds_timing0: hsd100pxn1 { > + clock-frequency = <65000000>; > + hactive = <1024>; > + vactive = <768>; > + hback-porch = <220>; > + hfront-porch = <40>; > + vback-porch = <21>; > + vfront-porch = <7>; > + hsync-len = <60>; > + vsync-len = <10>; > + de-active = <1>; > + pixelclk-active = <1>; > + }; > + }; > + }; > + > + lvds1: lvds-channel@1 { > + fsl,data-mapping = "spwg"; > + fsl,data-width = <18>; > + status = "okay"; > + > + display-timings { > + native-mode = <&lvds_timing1>; > + lvds_timing1: hsd100pxn1 { > + clock-frequency = <65000000>; > + hactive = <1024>; > + vactive = <768>; > + hback-porch = <220>; > + hfront-porch = <40>; > + vback-porch = <21>; > + vfront-porch = <7>; > + hsync-len = <60>; > + vsync-len = <10>; > + de-active = <1>; > + pixelclk-active = <1>; > + }; > + }; > + }; > +}; > + > +®_lcd0_pwr { > + status = "okay"; > +}; > + > +®_lcd1_pwr { > + status = "okay"; > +}; > + > +&sata { > + status = "okay"; > +}; > diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi > new file mode 100644 > index 0000000..828e7f3 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi > @@ -0,0 +1,672 @@ > +/* > + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/pwm/pwm.h> > + > +/ { > + aliases { > + can0 = &can2; > + can1 = &can1; > + ethernet0 = &fec; > + lcdif_23bit_pins_a = &pinctrl_disp0_1; > + lcdif_24bit_pins_a = &pinctrl_disp0_2; > + pwm0 = &pwm1; > + pwm1 = &pwm2; > + reg_can_xcvr = ®_can_xcvr; > + stk5led = &user_led; > + usbotg = &usbotg; > + sdhc0 = &usdhc1; > + sdhc1 = &usdhc2; > + }; > + > + memory { > + reg = <0 0>; /* will be filled by U-Boot */ > + }; > + > + clocks { > + #address-cells = <1>; > + #size-cells = <0>; > + mclk: codec_clock { clock@0 > + compatible = "fixed-clock"; > + reg = <0>; > + #clock-cells = <0>; > + clock-frequency = <27000000>; > + }; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + power { > + label = "Power Button"; > + gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; > + linux,code = <KEY_POWER>; > + gpio-key,wakeup; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + user_led: user { > + label = "Heartbeat"; > + gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "heartbeat"; > + }; > + }; > + > + regulators { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + reg_3v3_etn: regulator@0 { > + compatible = "regulator-fixed"; > + reg = <0>; > + regulator-name = "3V3_ETN"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_etnphy_power>; > + gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + reg_2v5: regulator@1 { > + compatible = "regulator-fixed"; > + reg = <1>; > + regulator-name = "2V5"; > + regulator-min-microvolt = <2500000>; > + regulator-max-microvolt = <2500000>; > + regulator-always-on; > + }; > + > + reg_3v3: regulator@2 { > + compatible = "regulator-fixed"; > + reg = <2>; > + regulator-name = "3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + reg_can_xcvr: regulator@3 { > + compatible = "regulator-fixed"; > + reg = <3>; > + regulator-name = "CAN XCVR"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flexcan_xcvr>; > + gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; > + enable-active-low; > + }; > + > + reg_lcd0_pwr: regulator@4 { > + compatible = "regulator-fixed"; > + reg = <4>; > + regulator-name = "LCD0 POWER"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_lcd0_pwr>; > + gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + status = "disabled"; > + }; > + > + reg_lcd1_pwr: regulator@5 { > + compatible = "regulator-fixed"; > + reg = <5>; > + regulator-name = "LCD1 POWER"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_lcd1_pwr>; > + gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + status = "disabled"; > + }; > +#if 0 > + reg_lcd_reset: regulator@6 { > + compatible = "regulator-fixed"; > + reg = <6>; > + regulator-name = "LCD RESET"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_lcd_reset>; > + gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; > + startup-delay-us = <300000>; > + enable-active-high; > + regulator-always-on; > + status = "disabled"; > + }; > +#endif > + reg_usbh1_vbus: regulator@7 { > + compatible = "regulator-fixed"; > + reg = <7>; > + regulator-name = "usbh1_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usbh1_vbus>; > + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + reg_usbotg_vbus: regulator@8 { > + compatible = "regulator-fixed"; > + reg = <8>; > + regulator-name = "usbotg_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usbotg_vbus>; > + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + }; > + > + sound { > + compatible = "fsl,imx6qdl-tx6qdl-sgtl5000", > + "fsl,imx-audio-sgtl5000"; > + model = "sgtl5000-audio"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_audmux>; > + ssi-controller = <&ssi1>; > + audio-codec = <&sgtl5000>; > + audio-routing = > + "MIC_IN", "Mic Jack", > + "Mic Jack", "Mic Bias", > + "Headphone Jack", "HP_OUT"; > + mux-int-port = <1>; > + mux-ext-port = <5>; > + }; > +}; > + > +&audmux { > + status = "okay"; > +}; > + > +&can1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flexcan1>; > + xceiver-supply = <®_can_xcvr>; > + Drop the new line. > + status = "okay"; > +}; > + > +&can2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flexcan2>; > + xceiver-supply = <®_can_xcvr>; > + > + status = "okay"; > +}; > + > +&fec { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_enet>; > + phy-mode = "rmii"; > + phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; > + phy-supply = <®_3v3_etn>; > + status = "okay"; > +}; > + > +&gpmi { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpmi_nand>; > + nand-on-flash-bbt; > + fsl,no-blockmark-swap; > + status = "okay"; > +}; > + > +&i2c1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c1>; > + clock-frequency = <400000>; > + status = "okay"; > + > + ds1339: rtc@68 { > + compatible = "dallas,ds1339"; > + reg = <0x68>; > + }; > +}; > + > +&i2c3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c3>; > + clock-frequency = <400000>; > + status = "okay"; > + > + sgtl5000: sgtl5000@0a { > + compatible = "fsl,sgtl5000"; > + reg = <0x0a>; > + VDDA-supply = <®_2v5>; > + VDDIO-supply = <®_3v3>; > + clocks = <&mclk>; > + }; > + > + polytouch: edt-ft5x06@38 { > + compatible = "edt,edt-ft5x06"; > + reg = <0x38>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_edt_ft5x06>; > + interrupt-parent = <&gpio6>; > + interrupts = <15 0>; > + reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; > + wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; Where are all these bindings documented? > + linux,wakeup; > + }; > + > + touchscreen: tsc2007@48 { > + compatible = "ti,tsc2007"; > + reg = <0x48>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_tsc2007>; > + interrupt-parent = <&gpio3>; > + interrupts = <26 0>; > + gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; > + ti,x-plate-ohms = <660>; > + linux,wakeup; > + }; > +}; > + > +&iomuxc { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hog>; > + > + imx6qdl-tx6 { > + pinctrl_hog: hoggrp { > + fsl,pins = < > + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 /* LED */ > + MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */ > + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT Broken comment? > + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* PWR BTN */ > + >; > + }; > + > + pinctrl_audmux: audmuxgrp { > + fsl,pins = < > + MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x130b0 /* SSI1_RXD */ > + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 /* SSI1_TXD */ > + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 /* SSI1_CLK */ > + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 /* SSI1_FS */ > + >; > + }; > + > + pinctrl_disp0_1: disp0grp-1 { > + fsl,pins = < > + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 > + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 > + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 > + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 > + /* PAD DISP0_DAT0 is used for the Flexcan transceiver control */ > + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 > + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 > + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 > + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 > + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 > + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 > + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 > + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 > + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 > + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 > + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 > + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 > + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 > + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 > + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 > + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 > + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 > + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 > + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 > + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 > + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 > + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 > + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 > + >; > + }; > + > + pinctrl_disp0_2: disp0grp-2 { > + fsl,pins = < > + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 > + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 > + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 > + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 > + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 > + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 > + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 > + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 > + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 > + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 > + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 > + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 > + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 > + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 > + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 > + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 > + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 > + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 > + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 > + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 > + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 > + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 > + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 > + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 > + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 > + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 > + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 > + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 > + >; > + }; > + > + pinctrl_edt_ft5x06: edt-ft5x06grp { > + fsl,pins = < > + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 /* Interrupt */ > + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 /* Reset */ > + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 /* Wake */ > + >; > + }; > + > + pinctrl_enet: enetgrp { > + fsl,pins = < > + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 > + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 > + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 > + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 > + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 > + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 > + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 > + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 > + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 > + >; > + }; > + > + pinctrl_etnphy_power: etnphy-pwrgrp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1 /* ETN PHY POWER */ > + >; > + }; > + > + pinctrl_flexcan1: flexcan1grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 > + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 > + >; > + }; > + > + pinctrl_flexcan2: flexcan2grp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 > + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 > + >; > + }; > + > + pinctrl_flexcan_xcvr: flexcan-xcvrgrp { > + fsl,pins = < > + MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x1b0b0 /* Flexcan XCVR enable */ > + >; > + }; > + > + pinctrl_gpmi_nand: gpmi-nand { gpminandgrp > + fsl,pins = < > + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x0b0b1 > + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x0b0b1 > + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x0b0b1 > + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x0b000 > + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x0b0b1 > + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x0b0b1 > + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x0b0b1 > + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x0b0b1 > + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x0b0b1 > + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x0b0b1 > + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x0b0b1 > + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x0b0b1 > + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x0b0b1 > + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x0b0b1 > + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x0b0b1 > + >; > + }; > + > + pinctrl_i2c1: i2c1grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 > + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_i2c3: i2c3grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 > + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_kpp: kppgrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_9__KEY_COL6 0x1b0b1 > + MX6QDL_PAD_GPIO_4__KEY_COL7 0x1b0b1 > + MX6QDL_PAD_KEY_COL2__KEY_COL2 0x1b0b1 > + MX6QDL_PAD_KEY_COL3__KEY_COL3 0x1b0b1 > + Drop it. > + MX6QDL_PAD_GPIO_2__KEY_ROW6 0x1b0b1 > + MX6QDL_PAD_GPIO_5__KEY_ROW7 0x1b0b1 > + MX6QDL_PAD_KEY_ROW2__KEY_ROW2 0x1b0b1 > + MX6QDL_PAD_KEY_ROW3__KEY_ROW3 0x1b0b1 > + >; > + }; > + > + pinctrl_lcd0_pwr: lcd0-pwrgrp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b1 /* LCD Reset */ > + >; > + }; > + > + pinctrl_lcd1_pwr: lcd1-pwrgrp { > + fsl,pins = < > + MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1b0b1 /* LCD Power Enable */ > + >; > + }; > + > + pinctrl_pwm1: pwm1grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 > + >; > + }; > + > + pinctrl_pwm2: pwm2grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 > + >; > + }; > + > + pinctrl_tsc2007: tsc2007grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b0 /* Interrupt */ > + >; > + }; > + > + pinctrl_uart1: uart1grp { > + fsl,pins = < > + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 > + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 > + >; > + }; > + > + pinctrl_uart1_rtscts: uart1_rtsctsgrp { > + fsl,pins = < > + MX6QDL_PAD_SD3_DAT1__UART1_RTS_B 0x1b0b1 > + MX6QDL_PAD_SD3_DAT0__UART1_CTS_B 0x1b0b1 > + >; > + }; > + > + pinctrl_uart2: uart2grp { > + fsl,pins = < > + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 > + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 > + >; > + }; > + > + pinctrl_uart2_rtscts: uart2_rtsctsgrp { > + fsl,pins = < > + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 > + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 > + >; > + }; > + > + pinctrl_uart3: uart3grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 > + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 > + >; > + }; > + > + pinctrl_uart3_rtscts: uart3_rtsctsgrp { > + fsl,pins = < > + MX6QDL_PAD_SD3_DAT3__UART3_CTS_B 0x1b0b1 > + MX6QDL_PAD_SD3_RST__UART3_RTS_B 0x1b0b1 > + >; > + }; > + > + pinctrl_usbh1_vbus: usbh1-vbusgrp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 /* USBH1_VBUSEN */ > + >; > + }; > + > + pinctrl_usbotg: usbotggrp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x17059 > + >; > + }; > + > + pinctrl_usbotg_vbus: usbotg-vbusgrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 /* USBOTG_VBUSEN */ > + >; > + }; > + > + pinctrl_usdhc1: usdhc1grp { > + fsl,pins = < > + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x0b0b1 > + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x0b0b1 > + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x0b0b1 > + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x0b0b1 > + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x0b0b1 > + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x0b0b1 > + MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x1b0b0 /* SD1 CD */ > + >; > + }; > + > + pinctrl_usdhc2: usdhc2grp { > + fsl,pins = < > + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x0b0b1 > + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x0b0b1 > + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x0b0b1 > + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x0b0b1 > + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x0b0b1 > + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x0b0b1 > + MX6QDL_PAD_SD3_CLK__GPIO7_IO03 0x1b0b0 /* SD2 CD */ > + >; > + }; > + }; > +}; > + > +&kpp { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_kpp>; > + /* sample keymap */ > + /* row/col 0,1 are mapped to KPP row/col 6,7 */ > + linux,keymap = < > + MATRIX_KEY(6, 6, KEY_POWER) /* 0x06060074 */ > + MATRIX_KEY(6, 7, KEY_KP0) /* 0x06070052 */ > + MATRIX_KEY(6, 2, KEY_KP1) /* 0x0602004f */ > + MATRIX_KEY(6, 3, KEY_KP2) /* 0x06030050 */ > + MATRIX_KEY(7, 6, KEY_KP3) /* 0x07060051 */ > + MATRIX_KEY(7, 7, KEY_KP4) /* 0x0707004b */ > + MATRIX_KEY(7, 2, KEY_KP5) /* 0x0702004c */ > + MATRIX_KEY(7, 3, KEY_KP6) /* 0x0703004d */ > + MATRIX_KEY(2, 6, KEY_KP7) /* 0x02060047 */ > + MATRIX_KEY(2, 7, KEY_KP8) /* 0x02070048 */ > + MATRIX_KEY(2, 2, KEY_KP9) /* 0x02020049 */ > + >; > +}; > + > +&pwm1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm1>; > + #pwm-cells = <3>; > + status = "disabled"; > +}; > + > +&pwm2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm2>; > + #pwm-cells = <3>; > + status = "okay"; > +}; > + > +&ssi1 { > + fsl,mode = "i2s-slave"; > + status = "okay"; > +}; > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1>; > + status = "okay"; > +}; > + > +&uart2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>; These two entries can be merged into one. Shawn > + status = "okay"; > +}; > + > +&uart3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>; > + status = "okay"; > +}; > + > +&usbh1 { > + vbus-supply = <®_usbh1_vbus>; > + dr_mode = "host"; > + disable-over-current; > + status = "okay"; > +}; > + > +&usbotg { > + vbus-supply = <®_usbotg_vbus>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usbotg>; > + dr_mode = "peripheral"; > + disable-over-current; > + status = "okay"; > +}; > + > +&usdhc1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc1>; > + cd-gpios = <&gpio7 2 0>; > + status = "okay"; > +}; > + > +&usdhc2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc2>; > + cd-gpios = <&gpio7 3 0>; > + status = "okay"; > +}; > -- > 1.7.10.4 > > >
Hi Shawn, it would help readability a lot if you would trim down the quoted parts of the original mail (like I did with [...] in this reply). Shawn Guo wrote: > On Wed, Mar 19, 2014 at 02:29:44PM +0100, Lothar Waßmann wrote: > > This patch adds support for the Ka-Ro electronics GmbH TX6 modules. > > There are five distinct module types with either i.MX6Q or i.MX6DL and > > LVDS or LCD display interface and one DTS file for a complete system > > with an i.MX6DL based TX6 module and a baseboard mounted on the back > > of a display (imx6dl-tx6dl-comtft.dts). > > > > Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> > > --- > > arch/arm/boot/dts/Makefile | 6 + > > arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts | 114 +++++ > > arch/arm/boot/dts/imx6dl-tx6u-801x.dts | 188 ++++++++ > > arch/arm/boot/dts/imx6dl-tx6u-811x.dts | 166 +++++++ > > arch/arm/boot/dts/imx6q-tx6q-1010.dts | 192 +++++++++ > > arch/arm/boot/dts/imx6q-tx6q-1020.dts | 192 +++++++++ > > arch/arm/boot/dts/imx6q-tx6q-1110.dts | 174 ++++++++ > > arch/arm/boot/dts/imx6qdl-tx6.dtsi | 672 +++++++++++++++++++++++++++++ > > 8 files changed, 1704 insertions(+) > > create mode 100644 arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts > > create mode 100644 arch/arm/boot/dts/imx6dl-tx6u-801x.dts > > create mode 100644 arch/arm/boot/dts/imx6dl-tx6u-811x.dts > > create mode 100644 arch/arm/boot/dts/imx6q-tx6q-1010.dts > > create mode 100644 arch/arm/boot/dts/imx6q-tx6q-1020.dts > > create mode 100644 arch/arm/boot/dts/imx6q-tx6q-1110.dts > > create mode 100644 arch/arm/boot/dts/imx6qdl-tx6.dtsi > > [...] > > diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts > > new file mode 100644 > > index 0000000..6df5a25 > > --- /dev/null > > +++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts > > @@ -0,0 +1,114 @@ > > +/* > > + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> > > + * > > + * The code contained herein is licensed under the GNU General Public > > + * License. You may obtain a copy of the GNU General Public License > > + * Version 2 at the following locations: > > + * > > + * http://www.opensource.org/licenses/gpl-license.html > > + * http://www.gnu.org/copyleft/gpl.html > > + */ > > + > > +/dts-v1/; > > +#include "imx6dl.dtsi" > > +#include "imx6qdl-tx6.dtsi" > > + > > +/ { > > + model = "Ka-Ro electronics TX6DL Module on CoMpact TFT"; > > + compatible = "fsl,imx6dl-tx6dl", "fsl,imx6dl"; > > Shouldn't it be "karo,imx6dl-tx6dl" instead? > Of course. :( > > + > > + aliases { > > + display = &display; > > + }; > > + > > + backlight: backlight { > > + compatible = "pwm-backlight"; > > + pwms = <&pwm2 0 500000 0>; > > + power-supply = <®_3v3>; > > + /* > > + * a poor man's way to create a 1:1 relationship between > > + * the PWM value and the actual duty cycle > > + */ > > + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 > > + 10 11 12 13 14 15 16 17 18 19 > > + 20 21 22 23 24 25 26 27 28 29 > > + 30 31 32 33 34 35 36 37 38 39 > > + 40 41 42 43 44 45 46 47 48 49 > > + 50 51 52 53 54 55 56 57 58 59 > > + 60 61 62 63 64 65 66 67 68 69 > > + 70 71 72 73 74 75 76 77 78 79 > > + 80 81 82 83 84 85 86 87 88 89 > > + 90 91 92 93 94 95 96 97 98 99 > > + 100>; > > + default-brightness-level = <50>; > > + }; > > + > > + display: display@di0 { > > + compatible = "fsl,imx-parallel-display"; > > + interface-pix-fmt = "rgb24"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_disp0_1>; > > + status = "okay"; > > + > > + port { > > + display0_in: endpoint { > > + remote-endpoint = <&ipu1_di0_disp0>; > > + }; > > + }; > > I do not have OF graph stuff in my tree yet. > You can apply the patch, once it arrives in your tree. [...] > > diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts > > new file mode 100644 > > index 0000000..c97fb42 > > --- /dev/null > > +++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts > > @@ -0,0 +1,166 @@ > > +/* > > + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> > > + * > > + * The code contained herein is licensed under the GNU General Public > > + * License. You may obtain a copy of the GNU General Public License > > + * Version 2 at the following locations: > > + * > > + * http://www.opensource.org/licenses/gpl-license.html > > + * http://www.gnu.org/copyleft/gpl.html > > + */ > > + > > +/dts-v1/; > > +#include "imx6dl.dtsi" > > +#include "imx6qdl-tx6.dtsi" > > + > > +/ { > > + model = "Ka-Ro electronics TX6U-811x Module"; > > + compatible = "fsl,imx6dl-tx6dl", "fsl,imx6dl"; > > + > > + aliases { > > + display = &lvds0; > > + lvds0 = &lvds0; > > + lvds1 = &lvds1; > > + }; > > + > > + backlight0: backlight0 { > > + compatible = "pwm-backlight"; > > + pwms = <&pwm2 0 500000 0>; > > + power-supply = <®_lcd0_pwr>; > > + /* > > + * a poor man's way to create a 1:1 relationship between > > + * the PWM value and the actual duty cycle > > + */ > > + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 > > + 10 11 12 13 14 15 16 17 18 19 > > + 20 21 22 23 24 25 26 27 28 29 > > + 30 31 32 33 34 35 36 37 38 39 > > + 40 41 42 43 44 45 46 47 48 49 > > + 50 51 52 53 54 55 56 57 58 59 > > + 60 61 62 63 64 65 66 67 68 69 > > + 70 71 72 73 74 75 76 77 78 79 > > + 80 81 82 83 84 85 86 87 88 89 > > + 90 91 92 93 94 95 96 97 98 99 > > + 100>; > > + default-brightness-level = <50>; > > + }; > > + > > + backlight1: backlight1 { > > + compatible = "pwm-backlight"; > > + pwms = <&pwm1 0 500000 0>; > > + power-supply = <®_lcd1_pwr>; > > + /* > > + * a poor man's way to create a 1:1 relationship between > > + * the PWM value and the actual duty cycle > > + */ > > + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 > > + 10 11 12 13 14 15 16 17 18 19 > > + 20 21 22 23 24 25 26 27 28 29 > > + 30 31 32 33 34 35 36 37 38 39 > > + 40 41 42 43 44 45 46 47 48 49 > > + 50 51 52 53 54 55 56 57 58 59 > > + 60 61 62 63 64 65 66 67 68 69 > > + 70 71 72 73 74 75 76 77 78 79 > > + 80 81 82 83 84 85 86 87 88 89 > > + 90 91 92 93 94 95 96 97 98 99 > > + 100>; > > + default-brightness-level = <50>; > > + }; > > + > > + panel0 { > > The convention of device tree node is node-name@unit-address, so in this > case it should probably be panel@0. > AFAIK that's only true for nodes that require a 'reg' property. Thus if it were: panels { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; panel@0 { compatible = "simple-panel"; reg = <0>; power-supply = <®_3v3>; backlight = <&backlight0>; }; [...] > > diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi > > new file mode 100644 > > index 0000000..828e7f3 > > --- /dev/null > > +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi > > @@ -0,0 +1,672 @@ > > +/* > > + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> > > + * > > + * The code contained herein is licensed under the GNU General Public > > + * License. You may obtain a copy of the GNU General Public License > > + * Version 2 at the following locations: > > + * > > + * http://www.opensource.org/licenses/gpl-license.html > > + * http://www.gnu.org/copyleft/gpl.html > > + */ > > + > > +#include <dt-bindings/gpio/gpio.h> > > +#include <dt-bindings/input/input.h> > > +#include <dt-bindings/pwm/pwm.h> > > + > > +/ { > > + aliases { > > + can0 = &can2; > > + can1 = &can1; > > + ethernet0 = &fec; > > + lcdif_23bit_pins_a = &pinctrl_disp0_1; > > + lcdif_24bit_pins_a = &pinctrl_disp0_2; > > + pwm0 = &pwm1; > > + pwm1 = &pwm2; > > + reg_can_xcvr = ®_can_xcvr; > > + stk5led = &user_led; > > + usbotg = &usbotg; > > + sdhc0 = &usdhc1; > > + sdhc1 = &usdhc2; > > + }; > > + > > + memory { > > + reg = <0 0>; /* will be filled by U-Boot */ > > + }; > > + > > + clocks { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + mclk: codec_clock { > > clock@0 > OK. > > +&can1 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_flexcan1>; > > + xceiver-supply = <®_can_xcvr>; > > + > > Drop the new line. > OK. [...] > > +&i2c3 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_i2c3>; > > + clock-frequency = <400000>; > > + status = "okay"; > > + > > + sgtl5000: sgtl5000@0a { > > + compatible = "fsl,sgtl5000"; > > + reg = <0x0a>; > > + VDDA-supply = <®_2v5>; > > + VDDIO-supply = <®_3v3>; > > + clocks = <&mclk>; > > + }; > > + > > + polytouch: edt-ft5x06@38 { > > + compatible = "edt,edt-ft5x06"; > > + reg = <0x38>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_edt_ft5x06>; > > + interrupt-parent = <&gpio6>; > > + interrupts = <15 0>; > > + reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; > > + wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; > > Where are all these bindings documented? > That's one in a separate patch adding DT support to the edt_ft5x06 driver. > > + linux,wakeup; > > + }; > > + > > + touchscreen: tsc2007@48 { > > + compatible = "ti,tsc2007"; > > + reg = <0x48>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_tsc2007>; > > + interrupt-parent = <&gpio3>; > > + interrupts = <26 0>; > > + gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; > > + ti,x-plate-ohms = <660>; > > + linux,wakeup; > > + }; > > +}; > > + > > +&iomuxc { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_hog>; > > + > > + imx6qdl-tx6 { > > + pinctrl_hog: hoggrp { > > + fsl,pins = < > > + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 /* LED */ > > + MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */ > > + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT > > Broken comment? > Yeah, right. Bad, that the compiler doesn't complain here. :( [...] > > + pinctrl_flexcan_xcvr: flexcan-xcvrgrp { > > + fsl,pins = < > > + MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x1b0b0 /* Flexcan XCVR enable */ > > + >; > > + }; > > + > > + pinctrl_gpmi_nand: gpmi-nand { > > gpminandgrp > OK. > > + pinctrl_kpp: kppgrp { > > + fsl,pins = < > > + MX6QDL_PAD_GPIO_9__KEY_COL6 0x1b0b1 > > + MX6QDL_PAD_GPIO_4__KEY_COL7 0x1b0b1 > > + MX6QDL_PAD_KEY_COL2__KEY_COL2 0x1b0b1 > > + MX6QDL_PAD_KEY_COL3__KEY_COL3 0x1b0b1 > > + > > Drop it. > I guess you mean the empty line. OK. [...] > > +&uart2 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>; > > These two entries can be merged into one. > I prefer to have the handshake pinctrls separate from the data lines so that the uart can be used with or without RTS/CTS, without having to mess around with the pinctrl defs. Lothar Waßmann
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index cf6c523..358684f 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -198,6 +198,9 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6dl-sabreauto.dtb \ imx6dl-sabrelite.dtb \ imx6dl-sabresd.dtb \ + imx6dl-tx6dl-comtft.dtb \ + imx6dl-tx6u-801x.dtb \ + imx6dl-tx6u-811x.dtb \ imx6dl-wandboard.dtb \ imx6q-arm2.dtb \ imx6q-cm-fx6.dtb \ @@ -218,6 +221,9 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-sbc6x.dtb \ imx6q-udoo.dtb \ imx6q-wandboard.dtb \ + imx6q-tx6q-1010.dtb \ + imx6q-tx6q-1020.dtb \ + imx6q-tx6q-1110.dtb \ imx6sl-evk.dtb \ vf610-cosmic.dtb \ vf610-twr.dtb diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts new file mode 100644 index 0000000..6df5a25 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts @@ -0,0 +1,114 @@ +/* + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6DL Module on CoMpact TFT"; + compatible = "fsl,imx6dl-tx6dl", "fsl,imx6dl"; + + aliases { + display = &display; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 0>; + power-supply = <®_3v3>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + display: display@di0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_1>; + status = "okay"; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + display-timings { + native-mode = <&ET070001DM6>; + + ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; + + panel { + compatible = "simple-panel"; + power-supply = <®_lcd1_pwr>; + enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + backlight = <&backlight>; + }; +}; + +&can1 { + status = "disabled"; +}; + +&can2 { + xceiver-supply = <®_3v3>; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +&kpp { + status = "disabled"; +}; + +®_can_xcvr { + status = "disabled"; +}; + +®_lcd1_pwr { + status = "okay"; +}; + +&touchscreen { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts new file mode 100644 index 0000000..25413f69 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts @@ -0,0 +1,188 @@ +/* + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6U-801x Module"; + compatible = "fsl,imx6dl-tx6dl", "fsl,imx6dl"; + + aliases { + display = &display; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + power-supply = <®_3v3>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + display: display@di0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_1>; + status = "okay"; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + display-timings { + VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <31>; + vsync-len = <2>; + vfront-porch = <12>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETV570 { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0350 { + clock-frequency = <6413760>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0430 { + clock-frequency = <9009000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0500 { + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0700 { /* same as ET0500 */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETQ570 { + clock-frequency = <6596040>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; + + panel { + compatible = "simple-panel"; + power-supply = <®_lcd1_pwr>; + enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + backlight = <&backlight>; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +®_lcd1_pwr { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts new file mode 100644 index 0000000..c97fb42 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts @@ -0,0 +1,166 @@ +/* + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6U-811x Module"; + compatible = "fsl,imx6dl-tx6dl", "fsl,imx6dl"; + + aliases { + display = &lvds0; + lvds0 = &lvds0; + lvds1 = &lvds1; + }; + + backlight0: backlight0 { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 0>; + power-supply = <®_lcd0_pwr>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + backlight1: backlight1 { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 500000 0>; + power-supply = <®_lcd1_pwr>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + panel0 { + compatible = "simple-panel"; + power-supply = <®_3v3>; + backlight = <&backlight0>; + }; + + panel1 { + compatible = "simple-panel"; + power-supply = <®_3v3>; + backlight = <&backlight1>; + }; +}; + +&i2c3 { + polytouch2: eeti@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eeti>; + interrupt-parent = <&gpio3>; + interrupts = <22 0>; + wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; + linux,wakeup; + }; +}; + +&iomuxc { + imx6dl-tx6u-811x { + pinctrl_eeti: eetigrp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ + >; + }; + }; +}; + +&kpp { + status = "disabled"; /* clashes with backlight1 PWM */ +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&lvds_timing0>; + lvds_timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; + + lvds1: lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&lvds_timing1>; + lvds_timing1: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +®_lcd0_pwr { + status = "okay"; +}; + +®_lcd1_pwr { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts new file mode 100644 index 0000000..6a37c73 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-tx6q-1010.dts @@ -0,0 +1,192 @@ +/* + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-1010 Module"; + compatible = "fsl,imx6q-tx6q", "fsl,imx6q"; + + aliases { + display = &display; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + power-supply = <®_3v3>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + display: display@di0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_1>; + status = "okay"; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + display-timings { + VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <31>; + vsync-len = <2>; + vfront-porch = <12>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETV570 { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0350 { + clock-frequency = <6413760>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0430 { + clock-frequency = <9009000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0500 { + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0700 { /* same as ET0500 */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETQ570 { + clock-frequency = <6596040>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; + + panel { + compatible = "simple-panel"; + power-supply = <®_lcd1_pwr>; + enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + backlight = <&backlight>; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +&ipu2 { + status = "disabled"; +}; + +®_lcd1_pwr { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/imx6q-tx6q-1020.dts new file mode 100644 index 0000000..9fc71b4 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-tx6q-1020.dts @@ -0,0 +1,192 @@ +/* + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-1020 Module"; + compatible = "fsl,imx6q-tx6q", "fsl,imx6q"; + + aliases { + display = &display; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + power-supply = <®_3v3>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + display: display@di0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_1>; + status = "okay"; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + display-timings { + VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <31>; + vsync-len = <2>; + vfront-porch = <12>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETV570 { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0350 { + clock-frequency = <6413760>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0430 { + clock-frequency = <9009000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0500 { + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0700 { /* same as ET0500 */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETQ570 { + clock-frequency = <6596040>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; + + panel { + compatible = "simple-panel"; + power-supply = <®_lcd1_pwr>; + enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + backlight = <&backlight>; + }; +}; + +&gpmi { + status = "disabled"; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +®_lcd1_pwr { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts new file mode 100644 index 0000000..60b2e0e --- /dev/null +++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts @@ -0,0 +1,174 @@ +/* + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-1110 Module"; + compatible = "fsl,imx6q-tx6q", "fsl,imx6q"; + + aliases { + display = &lvds0; + lvds0 = &lvds0; + lvds1 = &lvds1; + }; + + backlight0: backlight0 { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 0>; + power-supply = <®_lcd0_pwr>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + backlight1: backlight1 { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 500000 0>; + power-supply = <®_lcd1_pwr>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + panel0 { + compatible = "simple-panel"; + power-supply = <®_3v3>; + backlight = <&backlight0>; + }; + + panel1 { + compatible = "simple-panel"; + power-supply = <®_3v3>; + backlight = <&backlight1>; + }; +}; + +&i2c3 { + polytouch2: eeti@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eeti>; + interrupt-parent = <&gpio3>; + interrupts = <22 0>; + wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; + linux,wakeup; + }; +}; + +&iomuxc { + imx6q-tx6q-1110 { + pinctrl_eeti: eetigrp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ + >; + }; + }; +}; + +&ipu2 { + status = "disabled"; +}; + +&kpp { + status = "disabled"; /* clashes with backlight1 PWM */ +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&lvds_timing0>; + lvds_timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; + + lvds1: lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&lvds_timing1>; + lvds_timing1: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +®_lcd0_pwr { + status = "okay"; +}; + +®_lcd1_pwr { + status = "okay"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi new file mode 100644 index 0000000..828e7f3 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -0,0 +1,672 @@ +/* + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + aliases { + can0 = &can2; + can1 = &can1; + ethernet0 = &fec; + lcdif_23bit_pins_a = &pinctrl_disp0_1; + lcdif_24bit_pins_a = &pinctrl_disp0_2; + pwm0 = &pwm1; + pwm1 = &pwm2; + reg_can_xcvr = ®_can_xcvr; + stk5led = &user_led; + usbotg = &usbotg; + sdhc0 = &usdhc1; + sdhc1 = &usdhc2; + }; + + memory { + reg = <0 0>; /* will be filled by U-Boot */ + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + mclk: codec_clock { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power Button"; + gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + }; + + leds { + compatible = "gpio-leds"; + + user_led: user { + label = "Heartbeat"; + gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_3v3_etn: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "3V3_ETN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_etnphy_power>; + gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_2v5: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3v3: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_can_xcvr: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "CAN XCVR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan_xcvr>; + gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; + enable-active-low; + }; + + reg_lcd0_pwr: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "LCD0 POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd0_pwr>; + gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "disabled"; + }; + + reg_lcd1_pwr: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "LCD1 POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd1_pwr>; + gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "disabled"; + }; +#if 0 + reg_lcd_reset: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "LCD RESET"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_reset>; + gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; + startup-delay-us = <300000>; + enable-active-high; + regulator-always-on; + status = "disabled"; + }; +#endif + reg_usbh1_vbus: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "usbh1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usbotg_vbus: regulator@8 { + compatible = "regulator-fixed"; + reg = <8>; + regulator-name = "usbotg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_vbus>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; + + sound { + compatible = "fsl,imx6qdl-tx6qdl-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "sgtl5000-audio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + ssi-controller = <&ssi1>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <5>; + }; +}; + +&audmux { + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can_xcvr>; + + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can_xcvr>; + + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; + phy-supply = <®_3v3_etn>; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + fsl,no-blockmark-swap; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <400000>; + status = "okay"; + + ds1339: rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <400000>; + status = "okay"; + + sgtl5000: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_2v5>; + VDDIO-supply = <®_3v3>; + clocks = <&mclk>; + }; + + polytouch: edt-ft5x06@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_edt_ft5x06>; + interrupt-parent = <&gpio6>; + interrupts = <15 0>; + reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; + wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; + linux,wakeup; + }; + + touchscreen: tsc2007@48 { + compatible = "ti,tsc2007"; + reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc2007>; + interrupt-parent = <&gpio3>; + interrupts = <26 0>; + gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; + ti,x-plate-ohms = <660>; + linux,wakeup; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx6qdl-tx6 { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 /* LED */ + MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */ + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* PWR BTN */ + >; + }; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x130b0 /* SSI1_RXD */ + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 /* SSI1_TXD */ + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 /* SSI1_CLK */ + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 /* SSI1_FS */ + >; + }; + + pinctrl_disp0_1: disp0grp-1 { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + /* PAD DISP0_DAT0 is used for the Flexcan transceiver control */ + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_disp0_2: disp0grp-2 { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_edt_ft5x06: edt-ft5x06grp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 /* Interrupt */ + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 /* Reset */ + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 /* Wake */ + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + >; + }; + + pinctrl_etnphy_power: etnphy-pwrgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1 /* ETN PHY POWER */ + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan_xcvr: flexcan-xcvrgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x1b0b0 /* Flexcan XCVR enable */ + >; + }; + + pinctrl_gpmi_nand: gpmi-nand { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x0b0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x0b0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x0b0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x0b000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x0b0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x0b0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x0b0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x0b0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x0b0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x0b0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x0b0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x0b0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x0b0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x0b0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x0b0b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_kpp: kppgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__KEY_COL6 0x1b0b1 + MX6QDL_PAD_GPIO_4__KEY_COL7 0x1b0b1 + MX6QDL_PAD_KEY_COL2__KEY_COL2 0x1b0b1 + MX6QDL_PAD_KEY_COL3__KEY_COL3 0x1b0b1 + + MX6QDL_PAD_GPIO_2__KEY_ROW6 0x1b0b1 + MX6QDL_PAD_GPIO_5__KEY_ROW7 0x1b0b1 + MX6QDL_PAD_KEY_ROW2__KEY_ROW2 0x1b0b1 + MX6QDL_PAD_KEY_ROW3__KEY_ROW3 0x1b0b1 + >; + }; + + pinctrl_lcd0_pwr: lcd0-pwrgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b1 /* LCD Reset */ + >; + }; + + pinctrl_lcd1_pwr: lcd1-pwrgrp { + fsl,pins = < + MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1b0b1 /* LCD Power Enable */ + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_tsc2007: tsc2007grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b0 /* Interrupt */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart1_rtscts: uart1_rtsctsgrp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT1__UART1_RTS_B 0x1b0b1 + MX6QDL_PAD_SD3_DAT0__UART1_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2_rtscts: uart2_rtsctsgrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3_rtscts: uart3_rtsctsgrp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT3__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_SD3_RST__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbh1_vbus: usbh1-vbusgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 /* USBH1_VBUSEN */ + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x17059 + >; + }; + + pinctrl_usbotg_vbus: usbotg-vbusgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 /* USBOTG_VBUSEN */ + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x0b0b1 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x0b0b1 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x0b0b1 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x0b0b1 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x0b0b1 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x0b0b1 + MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x1b0b0 /* SD1 CD */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x0b0b1 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x0b0b1 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x0b0b1 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x0b0b1 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x0b0b1 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x0b0b1 + MX6QDL_PAD_SD3_CLK__GPIO7_IO03 0x1b0b0 /* SD2 CD */ + >; + }; + }; +}; + +&kpp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kpp>; + /* sample keymap */ + /* row/col 0,1 are mapped to KPP row/col 6,7 */ + linux,keymap = < + MATRIX_KEY(6, 6, KEY_POWER) /* 0x06060074 */ + MATRIX_KEY(6, 7, KEY_KP0) /* 0x06070052 */ + MATRIX_KEY(6, 2, KEY_KP1) /* 0x0602004f */ + MATRIX_KEY(6, 3, KEY_KP2) /* 0x06030050 */ + MATRIX_KEY(7, 6, KEY_KP3) /* 0x07060051 */ + MATRIX_KEY(7, 7, KEY_KP4) /* 0x0707004b */ + MATRIX_KEY(7, 2, KEY_KP5) /* 0x0702004c */ + MATRIX_KEY(7, 3, KEY_KP6) /* 0x0703004d */ + MATRIX_KEY(2, 6, KEY_KP7) /* 0x02060047 */ + MATRIX_KEY(2, 7, KEY_KP8) /* 0x02070048 */ + MATRIX_KEY(2, 2, KEY_KP9) /* 0x02020049 */ + >; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + #pwm-cells = <3>; + status = "disabled"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + #pwm-cells = <3>; + status = "okay"; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usbh1_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usbotg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + dr_mode = "peripheral"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio7 2 0>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio7 3 0>; + status = "okay"; +};
This patch adds support for the Ka-Ro electronics GmbH TX6 modules. There are five distinct module types with either i.MX6Q or i.MX6DL and LVDS or LCD display interface and one DTS file for a complete system with an i.MX6DL based TX6 module and a baseboard mounted on the back of a display (imx6dl-tx6dl-comtft.dts). Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> --- arch/arm/boot/dts/Makefile | 6 + arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts | 114 +++++ arch/arm/boot/dts/imx6dl-tx6u-801x.dts | 188 ++++++++ arch/arm/boot/dts/imx6dl-tx6u-811x.dts | 166 +++++++ arch/arm/boot/dts/imx6q-tx6q-1010.dts | 192 +++++++++ arch/arm/boot/dts/imx6q-tx6q-1020.dts | 192 +++++++++ arch/arm/boot/dts/imx6q-tx6q-1110.dts | 174 ++++++++ arch/arm/boot/dts/imx6qdl-tx6.dtsi | 672 +++++++++++++++++++++++++++++ 8 files changed, 1704 insertions(+) create mode 100644 arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts create mode 100644 arch/arm/boot/dts/imx6dl-tx6u-801x.dts create mode 100644 arch/arm/boot/dts/imx6dl-tx6u-811x.dts create mode 100644 arch/arm/boot/dts/imx6q-tx6q-1010.dts create mode 100644 arch/arm/boot/dts/imx6q-tx6q-1020.dts create mode 100644 arch/arm/boot/dts/imx6q-tx6q-1110.dts create mode 100644 arch/arm/boot/dts/imx6qdl-tx6.dtsi