| Message ID | 1393871864-25223-1-git-send-email-shc_work@mail.ru |
|---|---|
| State | New |
| Headers | show |
On Mon, Mar 03, 2014 at 10:37:44PM +0400, Alexander Shiyan wrote: > This patch replaces direct handling of peripheral bits with GPIOs by > using basic-mmio-gpio driver. As a result this change eliminate some > low-level code and removes custom io_map() from the board. > > Signed-off-by: Alexander Shiyan <shc_work@mail.ru> > --- > arch/arm/mach-imx/mach-mx21ads.c | 136 +++++++++++++++++++-------------------- > 1 file changed, 66 insertions(+), 70 deletions(-) I'm generally not fond of taking patches that touch the legacy board file unless they're fixing or cleaning up something. Since it looks like a cleanup, I will probably take it. But did you test the change on hardware? Shawn > > diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c > index a06aa4d..8742594 100644 > --- a/arch/arm/mach-imx/mach-mx21ads.c > +++ b/arch/arm/mach-imx/mach-mx21ads.c > @@ -17,51 +17,45 @@ > #include <linux/platform_device.h> > #include <linux/mtd/mtd.h> > #include <linux/mtd/physmap.h> > +#include <linux/basic_mmio_gpio.h> > #include <linux/gpio.h> > #include <asm/mach-types.h> > #include <asm/mach/arch.h> > #include <asm/mach/time.h> > -#include <asm/mach/map.h> > > #include "common.h" > #include "devices-imx21.h" > #include "hardware.h" > #include "iomux-mx21.h" > > -/* > - * Memory-mapped I/O on MX21ADS base board > - */ > -#define MX21ADS_MMIO_BASE_ADDR 0xf5000000 > -#define MX21ADS_MMIO_SIZE 0xc00000 > - > -#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \ > - (MX21ADS_MMIO_BASE_ADDR + (offset)) > +#define MX21ADS_CS8900A_REG (MX21_CS1_BASE_ADDR + 0x000000) > +#define MX21ADS_ST16C255_IOBASE_REG (MX21_CS1_BASE_ADDR + 0x200000) > +#define MX21ADS_VERSION_REG (MX21_CS1_BASE_ADDR + 0x400000) > +#define MX21ADS_IO_REG (MX21_CS1_BASE_ADDR + 0x800000) > > -#define MX21ADS_CS8900A_MMIO_SIZE 0x200000 > -#define MX21ADS_CS8900A_IRQ_GPIO IMX_GPIO_NR(5, 11) > -#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000) > -#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000) > -#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000) > +#define MX21ADS_MMC_CD IMX_GPIO_NR(4, 25) > +#define MX21ADS_CS8900A_IRQ_GPIO IMX_GPIO_NR(5, 11) > +#define MX21ADS_MMGPIO_BASE (6 * 32) > > /* MX21ADS_IO_REG bit definitions */ > -#define MX21ADS_IO_SD_WP 0x0001 /* read */ > -#define MX21ADS_IO_TP6 0x0001 /* write */ > -#define MX21ADS_IO_SW_SEL 0x0002 /* read */ > -#define MX21ADS_IO_TP7 0x0002 /* write */ > -#define MX21ADS_IO_RESET_E_UART 0x0004 > -#define MX21ADS_IO_RESET_BASE 0x0008 > -#define MX21ADS_IO_CSI_CTL2 0x0010 > -#define MX21ADS_IO_CSI_CTL1 0x0020 > -#define MX21ADS_IO_CSI_CTL0 0x0040 > -#define MX21ADS_IO_UART1_EN 0x0080 > -#define MX21ADS_IO_UART4_EN 0x0100 > -#define MX21ADS_IO_LCDON 0x0200 > -#define MX21ADS_IO_IRDA_EN 0x0400 > -#define MX21ADS_IO_IRDA_FIR_SEL 0x0800 > -#define MX21ADS_IO_IRDA_MD0_B 0x1000 > -#define MX21ADS_IO_IRDA_MD1 0x2000 > -#define MX21ADS_IO_LED4_ON 0x4000 > -#define MX21ADS_IO_LED3_ON 0x8000 > +#define MX21ADS_IO_SD_WP (MX21ADS_MMGPIO_BASE + 0) > +#define MX21ADS_IO_TP6 (MX21ADS_IO_SD_WP) > +#define MX21ADS_IO_SW_SEL (MX21ADS_MMGPIO_BASE + 1) > +#define MX21ADS_IO_TP7 (MX21ADS_IO_SW_SEL) > +#define MX21ADS_IO_RESET_E_UART (MX21ADS_MMGPIO_BASE + 2) > +#define MX21ADS_IO_RESET_BASE (MX21ADS_MMGPIO_BASE + 3) > +#define MX21ADS_IO_CSI_CTL2 (MX21ADS_MMGPIO_BASE + 4) > +#define MX21ADS_IO_CSI_CTL1 (MX21ADS_MMGPIO_BASE + 5) > +#define MX21ADS_IO_CSI_CTL0 (MX21ADS_MMGPIO_BASE + 6) > +#define MX21ADS_IO_UART1_EN (MX21ADS_MMGPIO_BASE + 7) > +#define MX21ADS_IO_UART4_EN (MX21ADS_MMGPIO_BASE + 8) > +#define MX21ADS_IO_LCDON (MX21ADS_MMGPIO_BASE + 9) > +#define MX21ADS_IO_IRDA_EN (MX21ADS_MMGPIO_BASE + 10) > +#define MX21ADS_IO_IRDA_FIR_SEL (MX21ADS_MMGPIO_BASE + 11) > +#define MX21ADS_IO_IRDA_MD0_B (MX21ADS_MMGPIO_BASE + 12) > +#define MX21ADS_IO_IRDA_MD1 (MX21ADS_MMGPIO_BASE + 13) > +#define MX21ADS_IO_LED4_ON (MX21ADS_MMGPIO_BASE + 14) > +#define MX21ADS_IO_LED3_ON (MX21ADS_MMGPIO_BASE + 15) > > static const int mx21ads_pins[] __initconst = { > > @@ -160,7 +154,7 @@ static struct platform_device mx21ads_nor_mtd_device = { > }; > > static struct resource mx21ads_cs8900_resources[] __initdata = { > - DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, MX21ADS_CS8900A_MMIO_SIZE), > + DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, SZ_1K), > /* irq number is run-time assigned */ > DEFINE_RES_IRQ(-1), > }; > @@ -179,23 +173,39 @@ static const struct imxuart_platform_data uart_pdata_rts __initconst = { > static const struct imxuart_platform_data uart_pdata_norts __initconst = { > }; > > +static struct resource mx21ads_mmgpio_resource = > + DEFINE_RES_MEM_NAMED(MX21ADS_IO_REG, SZ_2, "dat"); > + > +static struct bgpio_pdata mx21ads_mmgpio_pdata = { > + .base = MX21ADS_MMGPIO_BASE, > + .ngpio = 16, > +}; > + > +static struct platform_device mx21ads_mmgpio = { > + .name = "basic-mmio-gpio", > + .id = PLATFORM_DEVID_AUTO, > + .resource = &mx21ads_mmgpio_resource, > + .num_resources = 1, > + .dev = { > + .platform_data = &mx21ads_mmgpio_pdata, > + }, > +}; > + > static int mx21ads_fb_init(struct platform_device *pdev) > { > - u16 tmp; > + int ret; > > - tmp = __raw_readw(MX21ADS_IO_REG); > - tmp |= MX21ADS_IO_LCDON; > - __raw_writew(tmp, MX21ADS_IO_REG); > - return 0; > + ret = gpio_request(MX21ADS_IO_LCDON, "fb-lcdon"); > + if (ret) > + return ret; > + > + return gpio_direction_output(MX21ADS_IO_LCDON, 1); > } > > static void mx21ads_fb_exit(struct platform_device *pdev) > { > - u16 tmp; > - > - tmp = __raw_readw(MX21ADS_IO_REG); > - tmp &= ~MX21ADS_IO_LCDON; > - __raw_writew(tmp, MX21ADS_IO_REG); > + gpio_set_value(MX21ADS_IO_LCDON, 0); > + gpio_free(MX21ADS_IO_LCDON); > } > > /* > @@ -236,19 +246,26 @@ static const struct imx_fb_platform_data mx21ads_fb_data __initconst = { > > static int mx21ads_sdhc_get_ro(struct device *dev) > { > - return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0; > + return gpio_get_value(MX21ADS_IO_SD_WP); > } > > static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq, > void *data) > { > - return request_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), detect_irq, > - IRQF_TRIGGER_FALLING, "mmc-detect", data); > + int ret; > + > + ret = gpio_request(MX21ADS_IO_SD_WP, "mmc-ro"); > + if (ret) > + return ret; > + > + return request_irq(gpio_to_irq(MX21ADS_MMC_CD), detect_irq, > + IRQF_TRIGGER_FALLING, "mmc-detect", data); > } > > static void mx21ads_sdhc_exit(struct device *dev, void *data) > { > - free_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), data); > + free_irq(gpio_to_irq(MX21ADS_MMC_CD), data); > + gpio_free(MX21ADS_IO_SD_WP); > } > > static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = { > @@ -264,29 +281,8 @@ mx21ads_nand_board_info __initconst = { > .hw_ecc = 1, > }; > > -static struct map_desc mx21ads_io_desc[] __initdata = { > - /* > - * Memory-mapped I/O on MX21ADS Base board: > - * - CS8900A Ethernet controller > - * - ST16C2552CJ UART > - * - CPU and Base board version > - * - Base board I/O register > - */ > - { > - .virtual = MX21ADS_MMIO_BASE_ADDR, > - .pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR), > - .length = MX21ADS_MMIO_SIZE, > - .type = MT_DEVICE, > - }, > -}; > - > -static void __init mx21ads_map_io(void) > -{ > - mx21_map_io(); > - iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc)); > -} > - > static struct platform_device *platform_devices[] __initdata = { > + &mx21ads_mmgpio, > &mx21ads_nor_mtd_device, > }; > > @@ -321,7 +317,7 @@ static void __init mx21ads_timer_init(void) > MACHINE_START(MX21ADS, "Freescale i.MX21ADS") > /* maintainer: Freescale Semiconductor, Inc. */ > .atag_offset = 0x100, > - .map_io = mx21ads_map_io, > + .map_io = mx21_map_io, > .init_early = imx21_init_early, > .init_irq = mx21_init_irq, > .handle_irq = imx21_handle_irq, > -- > 1.8.3.2 >
Среда, 5 марта 2014, 13:56 +08:00 от Shawn Guo <shawn.guo@linaro.org>: > On Mon, Mar 03, 2014 at 10:37:44PM +0400, Alexander Shiyan wrote: > > This patch replaces direct handling of peripheral bits with GPIOs by > > using basic-mmio-gpio driver. As a result this change eliminate some > > low-level code and removes custom io_map() from the board. > > > > Signed-off-by: Alexander Shiyan <shc_work@mail.ru> > > --- > > arch/arm/mach-imx/mach-mx21ads.c | 136 +++++++++++++++++++-------------------- > > 1 file changed, 66 insertions(+), 70 deletions(-) > > I'm generally not fond of taking patches that touch the legacy board > file unless they're fixing or cleaning up something. Since it looks > like a cleanup, I will probably take it. But did you test the change on > hardware? No. Unfortunately I do not have this board. Similar change I did for the other subarch, and it has been tested (https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/arch/arm/mach-clps711x/board-p720t.c?id=6d640edeb598dd76c64aa99357d9b59996dcb3bc). Yes, it is mostly cleanup. The next change to this board will introduce GPIO regulator (based on this change) for the framebuffer, it will help to remove ".init" and ".exit" hooks for the imxfb driver. ---
On Wed, Mar 05, 2014 at 10:53:27AM +0400, Alexander Shiyan wrote: > Среда, 5 марта 2014, 13:56 +08:00 от Shawn Guo <shawn.guo@linaro.org>: > > On Mon, Mar 03, 2014 at 10:37:44PM +0400, Alexander Shiyan wrote: > > > This patch replaces direct handling of peripheral bits with GPIOs by > > > using basic-mmio-gpio driver. As a result this change eliminate some > > > low-level code and removes custom io_map() from the board. > > > > > > Signed-off-by: Alexander Shiyan <shc_work@mail.ru> > > > --- > > > arch/arm/mach-imx/mach-mx21ads.c | 136 +++++++++++++++++++-------------------- > > > 1 file changed, 66 insertions(+), 70 deletions(-) > > > > I'm generally not fond of taking patches that touch the legacy board > > file unless they're fixing or cleaning up something. Since it looks > > like a cleanup, I will probably take it. But did you test the change on > > hardware? > > No. Unfortunately I do not have this board. Similar change I did for the > other subarch, and it has been tested > (https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/arch/arm/mach-clps711x/board-p720t.c?id=6d640edeb598dd76c64aa99357d9b59996dcb3bc). > > Yes, it is mostly cleanup. The next change to this board will introduce GPIO > regulator (based on this change) for the framebuffer, it will help to remove > ".init" and ".exit" hooks for the imxfb driver. Ok, fare enough. Sascha? Shawn
On Wed, Mar 05, 2014 at 03:01:49PM +0800, Shawn Guo wrote: > On Wed, Mar 05, 2014 at 10:53:27AM +0400, Alexander Shiyan wrote: > > Среда, 5 марта 2014, 13:56 +08:00 от Shawn Guo <shawn.guo@linaro.org>: > > > On Mon, Mar 03, 2014 at 10:37:44PM +0400, Alexander Shiyan wrote: > > > > This patch replaces direct handling of peripheral bits with GPIOs by > > > > using basic-mmio-gpio driver. As a result this change eliminate some > > > > low-level code and removes custom io_map() from the board. > > > > > > > > Signed-off-by: Alexander Shiyan <shc_work@mail.ru> > > > > --- > > > > arch/arm/mach-imx/mach-mx21ads.c | 136 +++++++++++++++++++-------------------- > > > > 1 file changed, 66 insertions(+), 70 deletions(-) > > > > > > I'm generally not fond of taking patches that touch the legacy board > > > file unless they're fixing or cleaning up something. Since it looks > > > like a cleanup, I will probably take it. But did you test the change on > > > hardware? > > > > No. Unfortunately I do not have this board. Similar change I did for the > > other subarch, and it has been tested > > (https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/arch/arm/mach-clps711x/board-p720t.c?id=6d640edeb598dd76c64aa99357d9b59996dcb3bc). > > > > Yes, it is mostly cleanup. The next change to this board will introduce GPIO > > regulator (based on this change) for the framebuffer, it will help to remove > > ".init" and ".exit" hooks for the imxfb driver. > > Ok, fare enough. Sascha? Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Unfortunately I don't have this hardware either. Sascha
On Mon, Mar 03, 2014 at 10:37:44PM +0400, Alexander Shiyan wrote: > This patch replaces direct handling of peripheral bits with GPIOs by > using basic-mmio-gpio driver. As a result this change eliminate some > low-level code and removes custom io_map() from the board. > > Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Applied, thanks.
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index a06aa4d..8742594 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -17,51 +17,45 @@ #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/physmap.h> +#include <linux/basic_mmio_gpio.h> #include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <asm/mach/map.h> #include "common.h" #include "devices-imx21.h" #include "hardware.h" #include "iomux-mx21.h" -/* - * Memory-mapped I/O on MX21ADS base board - */ -#define MX21ADS_MMIO_BASE_ADDR 0xf5000000 -#define MX21ADS_MMIO_SIZE 0xc00000 - -#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \ - (MX21ADS_MMIO_BASE_ADDR + (offset)) +#define MX21ADS_CS8900A_REG (MX21_CS1_BASE_ADDR + 0x000000) +#define MX21ADS_ST16C255_IOBASE_REG (MX21_CS1_BASE_ADDR + 0x200000) +#define MX21ADS_VERSION_REG (MX21_CS1_BASE_ADDR + 0x400000) +#define MX21ADS_IO_REG (MX21_CS1_BASE_ADDR + 0x800000) -#define MX21ADS_CS8900A_MMIO_SIZE 0x200000 -#define MX21ADS_CS8900A_IRQ_GPIO IMX_GPIO_NR(5, 11) -#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000) -#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000) -#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000) +#define MX21ADS_MMC_CD IMX_GPIO_NR(4, 25) +#define MX21ADS_CS8900A_IRQ_GPIO IMX_GPIO_NR(5, 11) +#define MX21ADS_MMGPIO_BASE (6 * 32) /* MX21ADS_IO_REG bit definitions */ -#define MX21ADS_IO_SD_WP 0x0001 /* read */ -#define MX21ADS_IO_TP6 0x0001 /* write */ -#define MX21ADS_IO_SW_SEL 0x0002 /* read */ -#define MX21ADS_IO_TP7 0x0002 /* write */ -#define MX21ADS_IO_RESET_E_UART 0x0004 -#define MX21ADS_IO_RESET_BASE 0x0008 -#define MX21ADS_IO_CSI_CTL2 0x0010 -#define MX21ADS_IO_CSI_CTL1 0x0020 -#define MX21ADS_IO_CSI_CTL0 0x0040 -#define MX21ADS_IO_UART1_EN 0x0080 -#define MX21ADS_IO_UART4_EN 0x0100 -#define MX21ADS_IO_LCDON 0x0200 -#define MX21ADS_IO_IRDA_EN 0x0400 -#define MX21ADS_IO_IRDA_FIR_SEL 0x0800 -#define MX21ADS_IO_IRDA_MD0_B 0x1000 -#define MX21ADS_IO_IRDA_MD1 0x2000 -#define MX21ADS_IO_LED4_ON 0x4000 -#define MX21ADS_IO_LED3_ON 0x8000 +#define MX21ADS_IO_SD_WP (MX21ADS_MMGPIO_BASE + 0) +#define MX21ADS_IO_TP6 (MX21ADS_IO_SD_WP) +#define MX21ADS_IO_SW_SEL (MX21ADS_MMGPIO_BASE + 1) +#define MX21ADS_IO_TP7 (MX21ADS_IO_SW_SEL) +#define MX21ADS_IO_RESET_E_UART (MX21ADS_MMGPIO_BASE + 2) +#define MX21ADS_IO_RESET_BASE (MX21ADS_MMGPIO_BASE + 3) +#define MX21ADS_IO_CSI_CTL2 (MX21ADS_MMGPIO_BASE + 4) +#define MX21ADS_IO_CSI_CTL1 (MX21ADS_MMGPIO_BASE + 5) +#define MX21ADS_IO_CSI_CTL0 (MX21ADS_MMGPIO_BASE + 6) +#define MX21ADS_IO_UART1_EN (MX21ADS_MMGPIO_BASE + 7) +#define MX21ADS_IO_UART4_EN (MX21ADS_MMGPIO_BASE + 8) +#define MX21ADS_IO_LCDON (MX21ADS_MMGPIO_BASE + 9) +#define MX21ADS_IO_IRDA_EN (MX21ADS_MMGPIO_BASE + 10) +#define MX21ADS_IO_IRDA_FIR_SEL (MX21ADS_MMGPIO_BASE + 11) +#define MX21ADS_IO_IRDA_MD0_B (MX21ADS_MMGPIO_BASE + 12) +#define MX21ADS_IO_IRDA_MD1 (MX21ADS_MMGPIO_BASE + 13) +#define MX21ADS_IO_LED4_ON (MX21ADS_MMGPIO_BASE + 14) +#define MX21ADS_IO_LED3_ON (MX21ADS_MMGPIO_BASE + 15) static const int mx21ads_pins[] __initconst = { @@ -160,7 +154,7 @@ static struct platform_device mx21ads_nor_mtd_device = { }; static struct resource mx21ads_cs8900_resources[] __initdata = { - DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, MX21ADS_CS8900A_MMIO_SIZE), + DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, SZ_1K), /* irq number is run-time assigned */ DEFINE_RES_IRQ(-1), }; @@ -179,23 +173,39 @@ static const struct imxuart_platform_data uart_pdata_rts __initconst = { static const struct imxuart_platform_data uart_pdata_norts __initconst = { }; +static struct resource mx21ads_mmgpio_resource = + DEFINE_RES_MEM_NAMED(MX21ADS_IO_REG, SZ_2, "dat"); + +static struct bgpio_pdata mx21ads_mmgpio_pdata = { + .base = MX21ADS_MMGPIO_BASE, + .ngpio = 16, +}; + +static struct platform_device mx21ads_mmgpio = { + .name = "basic-mmio-gpio", + .id = PLATFORM_DEVID_AUTO, + .resource = &mx21ads_mmgpio_resource, + .num_resources = 1, + .dev = { + .platform_data = &mx21ads_mmgpio_pdata, + }, +}; + static int mx21ads_fb_init(struct platform_device *pdev) { - u16 tmp; + int ret; - tmp = __raw_readw(MX21ADS_IO_REG); - tmp |= MX21ADS_IO_LCDON; - __raw_writew(tmp, MX21ADS_IO_REG); - return 0; + ret = gpio_request(MX21ADS_IO_LCDON, "fb-lcdon"); + if (ret) + return ret; + + return gpio_direction_output(MX21ADS_IO_LCDON, 1); } static void mx21ads_fb_exit(struct platform_device *pdev) { - u16 tmp; - - tmp = __raw_readw(MX21ADS_IO_REG); - tmp &= ~MX21ADS_IO_LCDON; - __raw_writew(tmp, MX21ADS_IO_REG); + gpio_set_value(MX21ADS_IO_LCDON, 0); + gpio_free(MX21ADS_IO_LCDON); } /* @@ -236,19 +246,26 @@ static const struct imx_fb_platform_data mx21ads_fb_data __initconst = { static int mx21ads_sdhc_get_ro(struct device *dev) { - return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0; + return gpio_get_value(MX21ADS_IO_SD_WP); } static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq, void *data) { - return request_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), detect_irq, - IRQF_TRIGGER_FALLING, "mmc-detect", data); + int ret; + + ret = gpio_request(MX21ADS_IO_SD_WP, "mmc-ro"); + if (ret) + return ret; + + return request_irq(gpio_to_irq(MX21ADS_MMC_CD), detect_irq, + IRQF_TRIGGER_FALLING, "mmc-detect", data); } static void mx21ads_sdhc_exit(struct device *dev, void *data) { - free_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), data); + free_irq(gpio_to_irq(MX21ADS_MMC_CD), data); + gpio_free(MX21ADS_IO_SD_WP); } static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = { @@ -264,29 +281,8 @@ mx21ads_nand_board_info __initconst = { .hw_ecc = 1, }; -static struct map_desc mx21ads_io_desc[] __initdata = { - /* - * Memory-mapped I/O on MX21ADS Base board: - * - CS8900A Ethernet controller - * - ST16C2552CJ UART - * - CPU and Base board version - * - Base board I/O register - */ - { - .virtual = MX21ADS_MMIO_BASE_ADDR, - .pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR), - .length = MX21ADS_MMIO_SIZE, - .type = MT_DEVICE, - }, -}; - -static void __init mx21ads_map_io(void) -{ - mx21_map_io(); - iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc)); -} - static struct platform_device *platform_devices[] __initdata = { + &mx21ads_mmgpio, &mx21ads_nor_mtd_device, }; @@ -321,7 +317,7 @@ static void __init mx21ads_timer_init(void) MACHINE_START(MX21ADS, "Freescale i.MX21ADS") /* maintainer: Freescale Semiconductor, Inc. */ .atag_offset = 0x100, - .map_io = mx21ads_map_io, + .map_io = mx21_map_io, .init_early = imx21_init_early, .init_irq = mx21_init_irq, .handle_irq = imx21_handle_irq,
This patch replaces direct handling of peripheral bits with GPIOs by using basic-mmio-gpio driver. As a result this change eliminate some low-level code and removes custom io_map() from the board. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> --- arch/arm/mach-imx/mach-mx21ads.c | 136 +++++++++++++++++++-------------------- 1 file changed, 66 insertions(+), 70 deletions(-)