Message ID | 1391570096-2932-1-git-send-email-mranostay@gmail.com |
---|---|
State | Superseded, archived |
Headers | show |
On Tue, Feb 04, 2014 at 07:14:55PM -0800, Matt Ranostay Matt Ranostay wrote: > Document compatible string, required and optional DT properties for > AS3935 chipset driver. > > Signed-off-by: Matt Ranostay <mranostay@gmail.com> > --- > .../devicetree/bindings/iio/proximity/as3935.txt | 25 ++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/proximity/as3935.txt > > diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt b/Documentation/devicetree/bindings/iio/proximity/as3935.txt > new file mode 100644 > index 0000000..7e117cd > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt > @@ -0,0 +1,25 @@ > +Austrian Microsystems AS3935 Franklin lightning sensor device driver > + > +Required properties: > + - compatible: must be "ams,as3935" Change this to "amstaos,as3935" amstaos (AMS bought Taos) is already a registered vendor prefix in vendor-prefixes.txt > + - reg: SPI chip select number for the device > + - spi-cpha: SPI Mode 1 When using generic binding properties, please reference the binding being used. Like: - spi-cpha: SPI Mode 1. Refer to spi/spi-bus.txt for generic SPI slave node bindings. > + - interrupt-parent : should be the phandle for the interrupt controller > + - interrupts : interrupt mapping for GPIO IRQ Refer to interrupt-controller/interrupts.txt for generic interrupt client node bindings. > + > +Optional properties: > + - ams,tune-cap: Calibration tuning capacitor stepping value 0 - 15. > + Range of 0 to 120 pF, 8pF steps. This will require using the > + calibration data from the manufacturer. > + > + > +Example: > + > +as3935@0 { > + compatible = "ams,as3935"; > + reg = <0>; > + spi-cpha; > + interrupt-parent = <&gpio1>; > + interrupts = <16 1>; > + ams,tune-cap = /bits/ 8 <10>; What is this? Why not just ams,tune-cap = <10>; ? It's a value between 0-15, right? -Matt -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Feb 4, 2014 at 8:43 PM, Matt Porter <mporter@linaro.org> wrote: > On Tue, Feb 04, 2014 at 07:14:55PM -0800, Matt Ranostay Matt Ranostay wrote: >> Document compatible string, required and optional DT properties for >> AS3935 chipset driver. >> >> Signed-off-by: Matt Ranostay <mranostay@gmail.com> >> --- >> .../devicetree/bindings/iio/proximity/as3935.txt | 25 ++++++++++++++++++++++ >> 1 file changed, 25 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/iio/proximity/as3935.txt >> >> diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt b/Documentation/devicetree/bindings/iio/proximity/as3935.txt >> new file mode 100644 >> index 0000000..7e117cd >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt >> @@ -0,0 +1,25 @@ >> +Austrian Microsystems AS3935 Franklin lightning sensor device driver >> + >> +Required properties: >> + - compatible: must be "ams,as3935" > > Change this to "amstaos,as3935" > > amstaos (AMS bought Taos) is already a registered vendor prefix in > vendor-prefixes.txt > >> + - reg: SPI chip select number for the device >> + - spi-cpha: SPI Mode 1 > > When using generic binding properties, please reference the binding > being used. Like: > > - spi-cpha: SPI Mode 1. Refer to spi/spi-bus.txt for generic SPI > slave node bindings. > Noted. >> + - interrupt-parent : should be the phandle for the interrupt controller >> + - interrupts : interrupt mapping for GPIO IRQ > > Refer to interrupt-controller/interrupts.txt for generic > interrupt client node bindings. > Noted. >> + >> +Optional properties: >> + - ams,tune-cap: Calibration tuning capacitor stepping value 0 - 15. >> + Range of 0 to 120 pF, 8pF steps. This will require using the >> + calibration data from the manufacturer. >> + >> + >> +Example: >> + >> +as3935@0 { >> + compatible = "ams,as3935"; >> + reg = <0>; >> + spi-cpha; >> + interrupt-parent = <&gpio1>; >> + interrupts = <16 1>; >> + ams,tune-cap = /bits/ 8 <10>; > > What is this? Why not just ams,tune-cap = <10>; ? > > It's a value between 0-15, right? Correct but it is using of_property_read_u8() so that requires the /bits/ statement. Should this just be a u32 value? > > -Matt -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Feb 04, 2014 at 08:52:26PM -0800, Matt Ranostay Matt Ranostay wrote: > On Tue, Feb 4, 2014 at 8:43 PM, Matt Porter <mporter@linaro.org> wrote: > > On Tue, Feb 04, 2014 at 07:14:55PM -0800, Matt Ranostay Matt Ranostay wrote: > >> Document compatible string, required and optional DT properties for > >> AS3935 chipset driver. > >> > >> Signed-off-by: Matt Ranostay <mranostay@gmail.com> > >> --- > >> .../devicetree/bindings/iio/proximity/as3935.txt | 25 ++++++++++++++++++++++ > >> 1 file changed, 25 insertions(+) > >> create mode 100644 Documentation/devicetree/bindings/iio/proximity/as3935.txt > >> > >> diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt b/Documentation/devicetree/bindings/iio/proximity/as3935.txt > >> new file mode 100644 > >> index 0000000..7e117cd > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt > >> @@ -0,0 +1,25 @@ > >> +Austrian Microsystems AS3935 Franklin lightning sensor device driver > >> + > >> +Required properties: > >> + - compatible: must be "ams,as3935" > > > > Change this to "amstaos,as3935" > > > > amstaos (AMS bought Taos) is already a registered vendor prefix in > > vendor-prefixes.txt > > > >> + - reg: SPI chip select number for the device > >> + - spi-cpha: SPI Mode 1 > > > > When using generic binding properties, please reference the binding > > being used. Like: > > > > - spi-cpha: SPI Mode 1. Refer to spi/spi-bus.txt for generic SPI > > slave node bindings. > > > Noted. > > >> + - interrupt-parent : should be the phandle for the interrupt controller > >> + - interrupts : interrupt mapping for GPIO IRQ > > > > Refer to interrupt-controller/interrupts.txt for generic > > interrupt client node bindings. > > > Noted. > > >> + > >> +Optional properties: > >> + - ams,tune-cap: Calibration tuning capacitor stepping value 0 - 15. > >> + Range of 0 to 120 pF, 8pF steps. This will require using the > >> + calibration data from the manufacturer. > >> + > >> + > >> +Example: > >> + > >> +as3935@0 { > >> + compatible = "ams,as3935"; > >> + reg = <0>; > >> + spi-cpha; > >> + interrupt-parent = <&gpio1>; > >> + interrupts = <16 1>; > >> + ams,tune-cap = /bits/ 8 <10>; > > > > What is this? Why not just ams,tune-cap = <10>; ? > > > > It's a value between 0-15, right? > > Correct but it is using of_property_read_u8() so that requires the > /bits/ statement. > Should this just be a u32 value? Do you really need a u8? If not just read_u32() into an int and keep this syntax simple. -Matt -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Feb 4, 2014 at 9:17 PM, Matt Porter <mporter@linaro.org> wrote: > On Tue, Feb 04, 2014 at 08:52:26PM -0800, Matt Ranostay Matt Ranostay wrote: >> On Tue, Feb 4, 2014 at 8:43 PM, Matt Porter <mporter@linaro.org> wrote: >> > On Tue, Feb 04, 2014 at 07:14:55PM -0800, Matt Ranostay Matt Ranostay wrote: >> >> Document compatible string, required and optional DT properties for >> >> AS3935 chipset driver. >> >> >> >> Signed-off-by: Matt Ranostay <mranostay@gmail.com> >> >> --- >> >> .../devicetree/bindings/iio/proximity/as3935.txt | 25 ++++++++++++++++++++++ >> >> 1 file changed, 25 insertions(+) >> >> create mode 100644 Documentation/devicetree/bindings/iio/proximity/as3935.txt >> >> >> >> diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt b/Documentation/devicetree/bindings/iio/proximity/as3935.txt >> >> new file mode 100644 >> >> index 0000000..7e117cd >> >> --- /dev/null >> >> +++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt >> >> @@ -0,0 +1,25 @@ >> >> +Austrian Microsystems AS3935 Franklin lightning sensor device driver >> >> + >> >> +Required properties: >> >> + - compatible: must be "ams,as3935" >> > >> > Change this to "amstaos,as3935" >> > >> > amstaos (AMS bought Taos) is already a registered vendor prefix in >> > vendor-prefixes.txt >> > >> >> + - reg: SPI chip select number for the device >> >> + - spi-cpha: SPI Mode 1 >> > >> > When using generic binding properties, please reference the binding >> > being used. Like: >> > >> > - spi-cpha: SPI Mode 1. Refer to spi/spi-bus.txt for generic SPI >> > slave node bindings. >> > >> Noted. >> >> >> + - interrupt-parent : should be the phandle for the interrupt controller >> >> + - interrupts : interrupt mapping for GPIO IRQ >> > >> > Refer to interrupt-controller/interrupts.txt for generic >> > interrupt client node bindings. >> > >> Noted. >> >> >> + >> >> +Optional properties: >> >> + - ams,tune-cap: Calibration tuning capacitor stepping value 0 - 15. >> >> + Range of 0 to 120 pF, 8pF steps. This will require using the >> >> + calibration data from the manufacturer. >> >> + >> >> + >> >> +Example: >> >> + >> >> +as3935@0 { >> >> + compatible = "ams,as3935"; >> >> + reg = <0>; >> >> + spi-cpha; >> >> + interrupt-parent = <&gpio1>; >> >> + interrupts = <16 1>; >> >> + ams,tune-cap = /bits/ 8 <10>; >> > >> > What is this? Why not just ams,tune-cap = <10>; ? >> > >> > It's a value between 0-15, right? >> >> Correct but it is using of_property_read_u8() so that requires the >> /bits/ statement. >> Should this just be a u32 value? > > Do you really need a u8? If not just read_u32() into an int and keep > this syntax simple. Just me different it seems :P. Will fix in next version waiting for Peter's and Jonathan's input on the rest of the code first. > > -Matt -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On February 5, 2014 4:43:35 AM GMT+00:00, Matt Porter <mporter@linaro.org> wrote: >On Tue, Feb 04, 2014 at 07:14:55PM -0800, Matt Ranostay Matt Ranostay >wrote: >> Document compatible string, required and optional DT properties for >> AS3935 chipset driver. >> >> Signed-off-by: Matt Ranostay <mranostay@gmail.com> >> --- >> .../devicetree/bindings/iio/proximity/as3935.txt | 25 >++++++++++++++++++++++ >> 1 file changed, 25 insertions(+) >> create mode 100644 >Documentation/devicetree/bindings/iio/proximity/as3935.txt >> >> diff --git >a/Documentation/devicetree/bindings/iio/proximity/as3935.txt >b/Documentation/devicetree/bindings/iio/proximity/as3935.txt >> new file mode 100644 >> index 0000000..7e117cd >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt >> @@ -0,0 +1,25 @@ >> +Austrian Microsystems AS3935 Franklin lightning sensor device driver >> + >> +Required properties: >> + - compatible: must be "ams,as3935" > >Change this to "amstaos,as3935" > >amstaos (AMS bought Taos) is already a registered vendor prefix in >vendor-prefixes.txt It is but has a rather separate presence and is not where people expect to find non light sensor stuff from ams. I personally would go for a new vendor prefix and stick with ams. > >> + - reg: SPI chip select number for the device >> + - spi-cpha: SPI Mode 1 > >When using generic binding properties, please reference the binding >being used. Like: > > - spi-cpha: SPI Mode 1. Refer to spi/spi-bus.txt for generic SPI > slave node bindings. > >> + - interrupt-parent : should be the phandle for the interrupt >controller >> + - interrupts : interrupt mapping for GPIO IRQ > > Refer to interrupt-controller/interrupts.txt for generic > interrupt client node bindings. > >> + >> +Optional properties: >> + - ams,tune-cap: Calibration tuning capacitor stepping value 0 - 15. >> + Range of 0 to 120 pF, 8pF steps. This will require using the >> + calibration data from the manufacturer. >> + >> + >> +Example: >> + >> +as3935@0 { >> + compatible = "ams,as3935"; >> + reg = <0>; >> + spi-cpha; >> + interrupt-parent = <&gpio1>; >> + interrupts = <16 1>; >> + ams,tune-cap = /bits/ 8 <10>; > >What is this? Why not just ams,tune-cap = <10>; ? > >It's a value between 0-15, right? > >-Matt >-- >To unsubscribe from this list: send the line "unsubscribe linux-iio" in >the body of a message to majordomo@vger.kernel.org >More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Feb 4, 2014 at 11:24 PM, Jonathan Cameron <jic23@kernel.org> wrote: > > > On February 5, 2014 4:43:35 AM GMT+00:00, Matt Porter <mporter@linaro.org> wrote: >>On Tue, Feb 04, 2014 at 07:14:55PM -0800, Matt Ranostay Matt Ranostay >>wrote: >>> Document compatible string, required and optional DT properties for >>> AS3935 chipset driver. >>> >>> Signed-off-by: Matt Ranostay <mranostay@gmail.com> >>> --- >>> .../devicetree/bindings/iio/proximity/as3935.txt | 25 >>++++++++++++++++++++++ >>> 1 file changed, 25 insertions(+) >>> create mode 100644 >>Documentation/devicetree/bindings/iio/proximity/as3935.txt >>> >>> diff --git >>a/Documentation/devicetree/bindings/iio/proximity/as3935.txt >>b/Documentation/devicetree/bindings/iio/proximity/as3935.txt >>> new file mode 100644 >>> index 0000000..7e117cd >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt >>> @@ -0,0 +1,25 @@ >>> +Austrian Microsystems AS3935 Franklin lightning sensor device driver >>> + >>> +Required properties: >>> + - compatible: must be "ams,as3935" >> >>Change this to "amstaos,as3935" >> >>amstaos (AMS bought Taos) is already a registered vendor prefix in >>vendor-prefixes.txt > > It is but has a rather separate presence and is not where people expect to find non light > sensor stuff from ams. I personally would go for a new vendor prefix and stick with ams. > So should I add to vendor-prefixes.txt as well? or not? >> >>> + - reg: SPI chip select number for the device >>> + - spi-cpha: SPI Mode 1 >> >>When using generic binding properties, please reference the binding >>being used. Like: >> >> - spi-cpha: SPI Mode 1. Refer to spi/spi-bus.txt for generic SPI >> slave node bindings. >> >>> + - interrupt-parent : should be the phandle for the interrupt >>controller >>> + - interrupts : interrupt mapping for GPIO IRQ >> >> Refer to interrupt-controller/interrupts.txt for generic >> interrupt client node bindings. >> >>> + >>> +Optional properties: >>> + - ams,tune-cap: Calibration tuning capacitor stepping value 0 - 15. >>> + Range of 0 to 120 pF, 8pF steps. This will require using the >>> + calibration data from the manufacturer. >>> + >>> + >>> +Example: >>> + >>> +as3935@0 { >>> + compatible = "ams,as3935"; >>> + reg = <0>; >>> + spi-cpha; >>> + interrupt-parent = <&gpio1>; >>> + interrupts = <16 1>; >>> + ams,tune-cap = /bits/ 8 <10>; >> >>What is this? Why not just ams,tune-cap = <10>; ? >> >>It's a value between 0-15, right? >> >>-Matt >>-- >>To unsubscribe from this list: send the line "unsubscribe linux-iio" in >>the body of a message to majordomo@vger.kernel.org >>More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- > Sent from my Android phone with K-9 Mail. Please excuse my brevity. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On February 5, 2014 10:22:24 AM GMT+00:00, Matt Ranostay <mranostay@gmail.com> wrote: >On Tue, Feb 4, 2014 at 11:24 PM, Jonathan Cameron <jic23@kernel.org> >wrote: >> >> >> On February 5, 2014 4:43:35 AM GMT+00:00, Matt Porter ><mporter@linaro.org> wrote: >>>On Tue, Feb 04, 2014 at 07:14:55PM -0800, Matt Ranostay Matt Ranostay >>>wrote: >>>> Document compatible string, required and optional DT properties for >>>> AS3935 chipset driver. >>>> >>>> Signed-off-by: Matt Ranostay <mranostay@gmail.com> >>>> --- >>>> .../devicetree/bindings/iio/proximity/as3935.txt | 25 >>>++++++++++++++++++++++ >>>> 1 file changed, 25 insertions(+) >>>> create mode 100644 >>>Documentation/devicetree/bindings/iio/proximity/as3935.txt >>>> >>>> diff --git >>>a/Documentation/devicetree/bindings/iio/proximity/as3935.txt >>>b/Documentation/devicetree/bindings/iio/proximity/as3935.txt >>>> new file mode 100644 >>>> index 0000000..7e117cd >>>> --- /dev/null >>>> +++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt >>>> @@ -0,0 +1,25 @@ >>>> +Austrian Microsystems AS3935 Franklin lightning sensor device >driver >>>> + >>>> +Required properties: >>>> + - compatible: must be "ams,as3935" >>> >>>Change this to "amstaos,as3935" >>> >>>amstaos (AMS bought Taos) is already a registered vendor prefix in >>>vendor-prefixes.txt >> >> It is but has a rather separate presence and is not where people >expect to find non light >> sensor stuff from ams. I personally would go for a new vendor prefix >and stick with ams. >> > >So should I add to vendor-prefixes.txt as well? or not? Yes. All vendor prefixes should be in there > >>> >>>> + - reg: SPI chip select number for the device >>>> + - spi-cpha: SPI Mode 1 >>> >>>When using generic binding properties, please reference the binding >>>being used. Like: >>> >>> - spi-cpha: SPI Mode 1. Refer to spi/spi-bus.txt for generic >SPI >>> slave node bindings. >>> >>>> + - interrupt-parent : should be the phandle for the interrupt >>>controller >>>> + - interrupts : interrupt mapping for GPIO IRQ >>> >>> Refer to interrupt-controller/interrupts.txt for generic >>> interrupt client node bindings. >>> >>>> + >>>> +Optional properties: >>>> + - ams,tune-cap: Calibration tuning capacitor stepping value 0 >- 15. >>>> + Range of 0 to 120 pF, 8pF steps. This will require using the >>>> + calibration data from the manufacturer. >>>> + >>>> + >>>> +Example: >>>> + >>>> +as3935@0 { >>>> + compatible = "ams,as3935"; >>>> + reg = <0>; >>>> + spi-cpha; >>>> + interrupt-parent = <&gpio1>; >>>> + interrupts = <16 1>; >>>> + ams,tune-cap = /bits/ 8 <10>; >>> >>>What is this? Why not just ams,tune-cap = <10>; ? >>> >>>It's a value between 0-15, right? >>> >>>-Matt >>>-- >>>To unsubscribe from this list: send the line "unsubscribe linux-iio" >in >>>the body of a message to majordomo@vger.kernel.org >>>More majordomo info at http://vger.kernel.org/majordomo-info.html >> >> -- >> Sent from my Android phone with K-9 Mail. Please excuse my brevity. >-- >To unsubscribe from this list: send the line "unsubscribe linux-iio" in >the body of a message to majordomo@vger.kernel.org >More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt b/Documentation/devicetree/bindings/iio/proximity/as3935.txt new file mode 100644 index 0000000..7e117cd --- /dev/null +++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt @@ -0,0 +1,25 @@ +Austrian Microsystems AS3935 Franklin lightning sensor device driver + +Required properties: + - compatible: must be "ams,as3935" + - reg: SPI chip select number for the device + - spi-cpha: SPI Mode 1 + - interrupt-parent : should be the phandle for the interrupt controller + - interrupts : interrupt mapping for GPIO IRQ + +Optional properties: + - ams,tune-cap: Calibration tuning capacitor stepping value 0 - 15. + Range of 0 to 120 pF, 8pF steps. This will require using the + calibration data from the manufacturer. + + +Example: + +as3935@0 { + compatible = "ams,as3935"; + reg = <0>; + spi-cpha; + interrupt-parent = <&gpio1>; + interrupts = <16 1>; + ams,tune-cap = /bits/ 8 <10>; +};
Document compatible string, required and optional DT properties for AS3935 chipset driver. Signed-off-by: Matt Ranostay <mranostay@gmail.com> --- .../devicetree/bindings/iio/proximity/as3935.txt | 25 ++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/proximity/as3935.txt