@@ -95,7 +95,7 @@ Thu Jan 16 2003 Jeb Cramer <jeb.j.cramer@intel.com>
* ethtool.c (do_regs, dump_eeprom): Fix memory leaks on failed
operations. Add error handling of dump_regs(). Modify printout of
- eeprom dump to accomodate larger eeproms.
+ eeprom dump to accommodate larger eeproms.
* e1000.c: Update supported devices. Add error conditions for
unsupported devices.
@@ -190,7 +190,7 @@ Wed May 1 2002 Eli Kupermann <eli.kupermann@intel.com>
Wed May 1 2002 Christoph Hellwig <hch@lst.de>
- * Makefile.am (dist-hook): Use $(top-srcdir) for refering to sources.
+ * Makefile.am (dist-hook): Use $(top-srcdir) for referring to sources.
Mon Apr 29 2002 Christoph Hellwig <hch@lst.de>
@@ -180,7 +180,7 @@ Version 2.6.35 - August 10, 2010
Version 2.6.34 - May 26, 2010
* Feature: Support n-tuple filter programming
- * Feature: Support rx hashing, v2 (targetted for 2.6.35)
+ * Feature: Support rx hashing, v2 (targeted for 2.6.35)
* Feature: Add names of newer Marvell chips
Version 2.6.33 - February 24, 2010
@@ -608,7 +608,7 @@ e1000_dump_regs(struct ethtool_drvinfo *info, struct ethtool_regs *regs)
reg = regs_buff[17];
fprintf(stdout,
"M88 PHY CONTROL REGISTER: 0x%08X\n"
- " Jabber funtion: %s\n"
+ " Jabber function: %s\n"
" Auto-polarity: %s\n"
" SQE Test: %s\n"
" CLK125: %s\n"
@@ -3326,7 +3326,7 @@ static int do_srxntuple(struct cmd_context *ctx,
err = send_ioctl(ctx, &ntuplecmd);
/*
- * Display error only if reponse is something other than op not
+ * Display error only if response is something other than op not
* supported. It is possible that the interface uses the network
* flow classifier interface instead of N-tuple.
*/
@@ -437,8 +437,8 @@ natsemi_dump_regs(struct ethtool_drvinfo *info, struct ethtool_regs *regs)
data[REG_TXCFG]);
tmp = (data[REG_TXCFG] & BIT_TXCFG_MXDMA)>>20;
fprintf(stdout,
- " Drain Threshhold = %d bytes (%d)\n"
- " Fill Threshhold = %d bytes (%d)\n"
+ " Drain Threshold = %d bytes (%d)\n"
+ " Fill Threshold = %d bytes (%d)\n"
" Max DMA Burst per Tx = %d bytes\n"
" Automatic Tx Padding %s\n"
" Mac Loopback %s\n"
@@ -466,7 +466,7 @@ natsemi_dump_regs(struct ethtool_drvinfo *info, struct ethtool_regs *regs)
data[REG_RXCFG]);
tmp = (data[REG_RXCFG] & BIT_RXCFG_MXDMA)>>20;
fprintf(stdout,
- " Drain Threshhold = %d bytes (%d)\n"
+ " Drain Threshold = %d bytes (%d)\n"
" Max DMA Burst per Rx = %d bytes\n"
" Long Packets %s\n"
" Tx Packets %s\n"
@@ -103,14 +103,14 @@ struct sff8472_diags {
__u16 tx_power[5]; /* Measured TX Power in 0.1uW units */
__u16 rx_power[5]; /* Measured RX Power */
__u8 rx_power_type; /* 0 = OMA, 1 = Average power */
- __s16 sfp_temp[5]; /* SFP Temp in 16-bit signed 1/256 Celcius */
+ __s16 sfp_temp[5]; /* SFP Temp in 16-bit signed 1/256 Celsius */
__u16 sfp_voltage[5]; /* SFP voltage in 0.1mV units */
};
static struct sff8472_aw_flags {
const char *str; /* Human-readable string, null at the end */
- int offset; /* A2-relative adress offset */
+ int offset; /* A2-relative address offset */
__u8 value; /* Alarm is on if (offset & value) != 0. */
} sff8472_aw_flags[] = {
{ "Laser bias current high alarm", SFF_A2_ALRM_FLG, (1 << 3) },
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi> --- ChangeLog | 4 ++-- NEWS | 2 +- e1000.c | 2 +- ethtool.c | 2 +- natsemi.c | 6 +++--- sfpdiag.c | 4 ++-- 6 files changed, 10 insertions(+), 10 deletions(-)