| Message ID | 1390754945-28142-7-git-send-email-ben.dooks@codethink.co.uk |
|---|---|
| State | Superseded, archived |
| Headers | show |
On Sun, Jan 26, 2014 at 5:49 PM, Ben Dooks <ben.dooks@codethink.co.uk> wrote: > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/renesas,rcar-gen2-usb-phy.txt > @@ -0,0 +1,16 @@ > +Renesas RCar gen2 USB PHY bindings > + > +Required properties: > + - compatible: "renesas,usb-phy-r8a7790" for the R8A7790 SoC or > + "renesas,rcar-gen2-usb-phy" for any generic comaptible device. > + - reg : A single region to access device registers > + - clocks : The reference to the clock to use for this block > + - clock-names : The name for the clock at index 0 (must be "usbhs") > + > +Note, interrupt is currently not supported by the driver, but there should > +be a node in the device tree for it. s/node/property/? Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/usb/renesas,rcar-gen2-usb-phy.txt b/Documentation/devicetree/bindings/usb/renesas,rcar-gen2-usb-phy.txt new file mode 100644 index 0000000..e1d2dd9 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/renesas,rcar-gen2-usb-phy.txt @@ -0,0 +1,16 @@ +Renesas RCar gen2 USB PHY bindings + +Required properties: + - compatible: "renesas,usb-phy-r8a7790" for the R8A7790 SoC or + "renesas,rcar-gen2-usb-phy" for any generic comaptible device. + - reg : A single region to access device registers + - clocks : The reference to the clock to use for this block + - clock-names : The name for the clock at index 0 (must be "usbhs") + +Note, interrupt is currently not supported by the driver, but there should +be a node in the device tree for it. + +Optional properties: + + - renesas,usb0-hs: boolean, if present USB0 is connected to HS device. + - renesas,usb2-ss: boolean, if present USB2 is connected to XHCI controller.
Documentation for phy-rcar-usb-gen2 device tree binding. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> -- Cc: linux-sh@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: horms+renesas@verge.net.au --- .../bindings/usb/renesas,rcar-gen2-usb-phy.txt | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/renesas,rcar-gen2-usb-phy.txt