Message ID | 200906091738.58154.david-b@pacbell.net (mailing list archive) |
---|---|
State | Not Applicable, archived |
Headers | show |
On Tue, 2009-06-09 at 17:38 -0700, David Brownell wrote: > On Friday 05 June 2009, Subrata Modak wrote: > > Correct, it fixes the issue. However, since few changes might have gone > > to the Kconfig, the patch does not apply cleanly. Below is the patch, just > > a retake of the earlier one, but on the latest code. > > And it got mangled a bit along the way. Plus, the original one > goofed up Kconfig dependency displays ... both issues fixed in > this version, against current mainline GIT. > > If someone can verify all four PPC/OF/OHCI configs build on > on PPC64, I'm OK with it. > > - Dave Dave, Sorry for being late. The patch fixes the issue on the latest git for PPC64. Infact, the whole drivers/usb/host/ builds just fine: linux-2.6 # make drivers/usb/host/ CHK include/linux/version.h CHK include/linux/utsrelease.h SYMLINK include/asm -> include/asm-powerpc CALL scripts/checksyscalls.sh CC drivers/usb/host/ohci-hcd.o CC drivers/usb/host/pci-quirks.o CC drivers/usb/host/uhci-hcd.o LD drivers/usb/host/built-in.o CC [M] drivers/usb/host/isp116x-hcd.o CC [M] drivers/usb/host/u132-hcd.o You can check in the patch now. Regards-- Subrata > > > ========== CUT HERE > From: Arnd Bergmann <arnd@arndb.de> > Subject: fix build failure for PPC64 randconfig [usb/ohci] > > We could just make the USB_OHCI_HCD_PPC_OF option implicit > and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE > and USB_OHCI_HCD_PPC_OF_LE are set. > > [ dbrownell@users.sourceforge.net: fix patch manglation and dependencies ] > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > Resent-by: Subrata Modak <subrata@linux.vnet.ibm.com> > Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> > --- > drivers/usb/host/Kconfig | 29 +++++++++++++++-------------- > 1 file changed, 15 insertions(+), 14 deletions(-) > > --- a/drivers/usb/host/Kconfig > +++ b/drivers/usb/host/Kconfig > @@ -180,26 +180,27 @@ config USB_OHCI_HCD_PPC_SOC > Enables support for the USB controller on the MPC52xx or > STB03xxx processor chip. If unsure, say Y. > > -config USB_OHCI_HCD_PPC_OF > - bool "OHCI support for PPC USB controller on OF platform bus" > - depends on USB_OHCI_HCD && PPC_OF > - default y > - ---help--- > - Enables support for the USB controller PowerPC present on the > - OpenFirmware platform bus. > - > config USB_OHCI_HCD_PPC_OF_BE > - bool "Support big endian HC" > - depends on USB_OHCI_HCD_PPC_OF > - default y > + bool "OHCI support for OF platform bus (big endian)" > + depends on USB_OHCI_HCD && PPC_OF > select USB_OHCI_BIG_ENDIAN_DESC > select USB_OHCI_BIG_ENDIAN_MMIO > + ---help--- > + Enables support for big-endian USB controllers present on the > + OpenFirmware platform bus. > > config USB_OHCI_HCD_PPC_OF_LE > - bool "Support little endian HC" > - depends on USB_OHCI_HCD_PPC_OF > - default n > + bool "OHCI support for OF platform bus (little endian)" > + depends on USB_OHCI_HCD && PPC_OF > select USB_OHCI_LITTLE_ENDIAN > + ---help--- > + Enables support for little-endian USB controllers present on the > + OpenFirmware platform bus. > + > +config USB_OHCI_HCD_PPC_OF > + bool > + depends on USB_OHCI_HCD && PPC_OF > + default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE > > config USB_OHCI_HCD_PCI > bool "OHCI support for PCI-bus USB controllers" >
On Fri, 2009-06-12 at 15:05 +0530, Subrata Modak wrote: > On Tue, 2009-06-09 at 17:38 -0700, David Brownell wrote: > > On Friday 05 June 2009, Subrata Modak wrote: > > > Correct, it fixes the issue. However, since few changes might have gone > > > to the Kconfig, the patch does not apply cleanly. Below is the patch, just > > > a retake of the earlier one, but on the latest code. > > > > And it got mangled a bit along the way. Plus, the original one > > goofed up Kconfig dependency displays ... both issues fixed in > > this version, against current mainline GIT. > > > > If someone can verify all four PPC/OF/OHCI configs build on > > on PPC64, I'm OK with it. > > > > - Dave > > Dave, > > Sorry for being late. The patch fixes the issue on the latest git for > PPC64. Infact, the whole drivers/usb/host/ builds just fine: > > linux-2.6 # make drivers/usb/host/ > CHK include/linux/version.h > CHK include/linux/utsrelease.h > SYMLINK include/asm -> include/asm-powerpc > CALL scripts/checksyscalls.sh > CC drivers/usb/host/ohci-hcd.o > CC drivers/usb/host/pci-quirks.o > CC drivers/usb/host/uhci-hcd.o > LD drivers/usb/host/built-in.o > CC [M] drivers/usb/host/isp116x-hcd.o > CC [M] drivers/usb/host/u132-hcd.o > > You can check in the patch now. Dave, Have you checked in this patch ? Or, does it require some more modification/updates from somebody´s side ? Regards-- Subrata > > Regards-- > Subrata > > > > > > > ========== CUT HERE > > From: Arnd Bergmann <arnd@arndb.de> > > Subject: fix build failure for PPC64 randconfig [usb/ohci] > > > > We could just make the USB_OHCI_HCD_PPC_OF option implicit > > and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE > > and USB_OHCI_HCD_PPC_OF_LE are set. > > > > [ dbrownell@users.sourceforge.net: fix patch manglation and dependencies ] > > > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > > Resent-by: Subrata Modak <subrata@linux.vnet.ibm.com> > > Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> > > --- > > drivers/usb/host/Kconfig | 29 +++++++++++++++-------------- > > 1 file changed, 15 insertions(+), 14 deletions(-) > > > > --- a/drivers/usb/host/Kconfig > > +++ b/drivers/usb/host/Kconfig > > @@ -180,26 +180,27 @@ config USB_OHCI_HCD_PPC_SOC > > Enables support for the USB controller on the MPC52xx or > > STB03xxx processor chip. If unsure, say Y. > > > > -config USB_OHCI_HCD_PPC_OF > > - bool "OHCI support for PPC USB controller on OF platform bus" > > - depends on USB_OHCI_HCD && PPC_OF > > - default y > > - ---help--- > > - Enables support for the USB controller PowerPC present on the > > - OpenFirmware platform bus. > > - > > config USB_OHCI_HCD_PPC_OF_BE > > - bool "Support big endian HC" > > - depends on USB_OHCI_HCD_PPC_OF > > - default y > > + bool "OHCI support for OF platform bus (big endian)" > > + depends on USB_OHCI_HCD && PPC_OF > > select USB_OHCI_BIG_ENDIAN_DESC > > select USB_OHCI_BIG_ENDIAN_MMIO > > + ---help--- > > + Enables support for big-endian USB controllers present on the > > + OpenFirmware platform bus. > > > > config USB_OHCI_HCD_PPC_OF_LE > > - bool "Support little endian HC" > > - depends on USB_OHCI_HCD_PPC_OF > > - default n > > + bool "OHCI support for OF platform bus (little endian)" > > + depends on USB_OHCI_HCD && PPC_OF > > select USB_OHCI_LITTLE_ENDIAN > > + ---help--- > > + Enables support for little-endian USB controllers present on the > > + OpenFirmware platform bus. > > + > > +config USB_OHCI_HCD_PPC_OF > > + bool > > + depends on USB_OHCI_HCD && PPC_OF > > + default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE > > > > config USB_OHCI_HCD_PCI > > bool "OHCI support for PCI-bus USB controllers" > >
On Mon, 2009-06-15 at 12:21 +0530, Subrata Modak wrote: > On Fri, 2009-06-12 at 15:05 +0530, Subrata Modak wrote: > > On Tue, 2009-06-09 at 17:38 -0700, David Brownell wrote: > > > On Friday 05 June 2009, Subrata Modak wrote: > > > > Correct, it fixes the issue. However, since few changes might have gone > > > > to the Kconfig, the patch does not apply cleanly. Below is the patch, just > > > > a retake of the earlier one, but on the latest code. > > > > > > And it got mangled a bit along the way. Plus, the original one > > > goofed up Kconfig dependency displays ... both issues fixed in > > > this version, against current mainline GIT. > > > > > > If someone can verify all four PPC/OF/OHCI configs build on > > > on PPC64, I'm OK with it. > > > > > > - Dave > > > > Dave, > > > > Sorry for being late. The patch fixes the issue on the latest git for > > PPC64. Infact, the whole drivers/usb/host/ builds just fine: > > > > linux-2.6 # make drivers/usb/host/ > > CHK include/linux/version.h > > CHK include/linux/utsrelease.h > > SYMLINK include/asm -> include/asm-powerpc > > CALL scripts/checksyscalls.sh > > CC drivers/usb/host/ohci-hcd.o > > CC drivers/usb/host/pci-quirks.o > > CC drivers/usb/host/uhci-hcd.o > > LD drivers/usb/host/built-in.o > > CC [M] drivers/usb/host/isp116x-hcd.o > > CC [M] drivers/usb/host/u132-hcd.o > > > > You can check in the patch now. > > Dave, > > Have you checked in this patch ? Or, does it require some more > modification/updates from somebody´s side ? > Dave, Would you consider checking in this patch ? Regards-- Subrata > Regards-- > Subrata > > > > > Regards-- > > Subrata > > > > > > > > > > > ========== CUT HERE > > > From: Arnd Bergmann <arnd@arndb.de> > > > Subject: fix build failure for PPC64 randconfig [usb/ohci] > > > > > > We could just make the USB_OHCI_HCD_PPC_OF option implicit > > > and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE > > > and USB_OHCI_HCD_PPC_OF_LE are set. > > > > > > [ dbrownell@users.sourceforge.net: fix patch manglation and dependencies ] > > > > > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > > > Resent-by: Subrata Modak <subrata@linux.vnet.ibm.com> > > > Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> > > > --- > > > drivers/usb/host/Kconfig | 29 +++++++++++++++-------------- > > > 1 file changed, 15 insertions(+), 14 deletions(-) > > > > > > --- a/drivers/usb/host/Kconfig > > > +++ b/drivers/usb/host/Kconfig > > > @@ -180,26 +180,27 @@ config USB_OHCI_HCD_PPC_SOC > > > Enables support for the USB controller on the MPC52xx or > > > STB03xxx processor chip. If unsure, say Y. > > > > > > -config USB_OHCI_HCD_PPC_OF > > > - bool "OHCI support for PPC USB controller on OF platform bus" > > > - depends on USB_OHCI_HCD && PPC_OF > > > - default y > > > - ---help--- > > > - Enables support for the USB controller PowerPC present on the > > > - OpenFirmware platform bus. > > > - > > > config USB_OHCI_HCD_PPC_OF_BE > > > - bool "Support big endian HC" > > > - depends on USB_OHCI_HCD_PPC_OF > > > - default y > > > + bool "OHCI support for OF platform bus (big endian)" > > > + depends on USB_OHCI_HCD && PPC_OF > > > select USB_OHCI_BIG_ENDIAN_DESC > > > select USB_OHCI_BIG_ENDIAN_MMIO > > > + ---help--- > > > + Enables support for big-endian USB controllers present on the > > > + OpenFirmware platform bus. > > > > > > config USB_OHCI_HCD_PPC_OF_LE > > > - bool "Support little endian HC" > > > - depends on USB_OHCI_HCD_PPC_OF > > > - default n > > > + bool "OHCI support for OF platform bus (little endian)" > > > + depends on USB_OHCI_HCD && PPC_OF > > > select USB_OHCI_LITTLE_ENDIAN > > > + ---help--- > > > + Enables support for little-endian USB controllers present on the > > > + OpenFirmware platform bus. > > > + > > > +config USB_OHCI_HCD_PPC_OF > > > + bool > > > + depends on USB_OHCI_HCD && PPC_OF > > > + default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE > > > > > > config USB_OHCI_HCD_PCI > > > bool "OHCI support for PCI-bus USB controllers" > > >
On Wed, Jun 17, 2009 at 6:53 AM, Subrata Modak<subrata@linux.vnet.ibm.com> wrote: > On Mon, 2009-06-15 at 12:21 +0530, Subrata Modak wrote: >> On Fri, 2009-06-12 at 15:05 +0530, Subrata Modak wrote: >> > On Tue, 2009-06-09 at 17:38 -0700, David Brownell wrote: >> > > On Friday 05 June 2009, Subrata Modak wrote: >> > > > Correct, it fixes the issue. However, since few changes might have gone >> > > > to the Kconfig, the patch does not apply cleanly. Below is the patch, just >> > > > a retake of the earlier one, but on the latest code. >> > > >> > > And it got mangled a bit along the way. Plus, the original one >> > > goofed up Kconfig dependency displays ... both issues fixed in >> > > this version, against current mainline GIT. >> > > >> > > If someone can verify all four PPC/OF/OHCI configs build on >> > > on PPC64, I'm OK with it. >> > > >> > > - Dave >> > >> > Dave, >> > >> > Sorry for being late. The patch fixes the issue on the latest git for >> > PPC64. Infact, the whole drivers/usb/host/ builds just fine: >> > >> > linux-2.6 # make drivers/usb/host/ >> > CHK include/linux/version.h >> > CHK include/linux/utsrelease.h >> > SYMLINK include/asm -> include/asm-powerpc >> > CALL scripts/checksyscalls.sh >> > CC drivers/usb/host/ohci-hcd.o >> > CC drivers/usb/host/pci-quirks.o >> > CC drivers/usb/host/uhci-hcd.o >> > LD drivers/usb/host/built-in.o >> > CC [M] drivers/usb/host/isp116x-hcd.o >> > CC [M] drivers/usb/host/u132-hcd.o >> > >> > You can check in the patch now. >> >> Dave, >> >> Have you checked in this patch ? Or, does it require some more >> modification/updates from somebody´s side ? >> > > Dave, > > Would you consider checking in this patch ? Hold off please; give me a couple of hours to investigate. g.
On Wed, Jun 17, 2009 at 12:15 PM, Grant Likely<grant.likely@secretlab.ca> wrote: > On Wed, Jun 17, 2009 at 6:53 AM, Subrata > Modak<subrata@linux.vnet.ibm.com> wrote: >> On Mon, 2009-06-15 at 12:21 +0530, Subrata Modak wrote: >>> On Fri, 2009-06-12 at 15:05 +0530, Subrata Modak wrote: >>> > On Tue, 2009-06-09 at 17:38 -0700, David Brownell wrote: >>> > > On Friday 05 June 2009, Subrata Modak wrote: >>> > > > Correct, it fixes the issue. However, since few changes might have gone >>> > > > to the Kconfig, the patch does not apply cleanly. Below is the patch, just >>> > > > a retake of the earlier one, but on the latest code. >>> > > >>> > > And it got mangled a bit along the way. Plus, the original one >>> > > goofed up Kconfig dependency displays ... both issues fixed in >>> > > this version, against current mainline GIT. >>> > > >>> > > If someone can verify all four PPC/OF/OHCI configs build on >>> > > on PPC64, I'm OK with it. >>> > > >>> > > - Dave >>> > >>> > Dave, >>> > >>> > Sorry for being late. The patch fixes the issue on the latest git for >>> > PPC64. Infact, the whole drivers/usb/host/ builds just fine: >>> > >>> > linux-2.6 # make drivers/usb/host/ >>> > CHK include/linux/version.h >>> > CHK include/linux/utsrelease.h >>> > SYMLINK include/asm -> include/asm-powerpc >>> > CALL scripts/checksyscalls.sh >>> > CC drivers/usb/host/ohci-hcd.o >>> > CC drivers/usb/host/pci-quirks.o >>> > CC drivers/usb/host/uhci-hcd.o >>> > LD drivers/usb/host/built-in.o >>> > CC [M] drivers/usb/host/isp116x-hcd.o >>> > CC [M] drivers/usb/host/u132-hcd.o >>> > >>> > You can check in the patch now. >>> >>> Dave, >>> >>> Have you checked in this patch ? Or, does it require some more >>> modification/updates from somebody´s side ? >>> >> >> Dave, >> >> Would you consider checking in this patch ? > > Hold off please; give me a couple of hours to investigate. Never mind; I replied to the wrong email. Please ignore my comments. g.
========== CUT HERE From: Arnd Bergmann <arnd@arndb.de> Subject: fix build failure for PPC64 randconfig [usb/ohci] We could just make the USB_OHCI_HCD_PPC_OF option implicit and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE and USB_OHCI_HCD_PPC_OF_LE are set. [ dbrownell@users.sourceforge.net: fix patch manglation and dependencies ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Resent-by: Subrata Modak <subrata@linux.vnet.ibm.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> --- drivers/usb/host/Kconfig | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -180,26 +180,27 @@ config USB_OHCI_HCD_PPC_SOC Enables support for the USB controller on the MPC52xx or STB03xxx processor chip. If unsure, say Y. -config USB_OHCI_HCD_PPC_OF - bool "OHCI support for PPC USB controller on OF platform bus" - depends on USB_OHCI_HCD && PPC_OF - default y - ---help--- - Enables support for the USB controller PowerPC present on the - OpenFirmware platform bus. - config USB_OHCI_HCD_PPC_OF_BE - bool "Support big endian HC" - depends on USB_OHCI_HCD_PPC_OF - default y + bool "OHCI support for OF platform bus (big endian)" + depends on USB_OHCI_HCD && PPC_OF select USB_OHCI_BIG_ENDIAN_DESC select USB_OHCI_BIG_ENDIAN_MMIO + ---help--- + Enables support for big-endian USB controllers present on the + OpenFirmware platform bus. config USB_OHCI_HCD_PPC_OF_LE - bool "Support little endian HC" - depends on USB_OHCI_HCD_PPC_OF - default n + bool "OHCI support for OF platform bus (little endian)" + depends on USB_OHCI_HCD && PPC_OF select USB_OHCI_LITTLE_ENDIAN + ---help--- + Enables support for little-endian USB controllers present on the + OpenFirmware platform bus. + +config USB_OHCI_HCD_PPC_OF + bool + depends on USB_OHCI_HCD && PPC_OF + default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE config USB_OHCI_HCD_PCI bool "OHCI support for PCI-bus USB controllers"