@@ -357,7 +357,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE
config KEXEC
bool "kexec system call"
- depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP))
+ depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP)) || PPC_BOOK3E
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
@@ -30,72 +30,6 @@
#include <asm/smp.h>
#include <asm/hw_breakpoint.h>
-int default_machine_kexec_prepare(struct kimage *image)
-{
- int i;
- unsigned long begin, end; /* limits of segment */
- unsigned long low, high; /* limits of blocked memory range */
- struct device_node *node;
- const unsigned long *basep;
- const unsigned int *sizep;
-
- if (!ppc_md.hpte_clear_all)
- return -ENOENT;
-
- /*
- * Since we use the kernel fault handlers and paging code to
- * handle the virtual mode, we must make sure no destination
- * overlaps kernel static data or bss.
- */
- for (i = 0; i < image->nr_segments; i++)
- if (image->segment[i].mem < __pa(_end))
- return -ETXTBSY;
-
- /*
- * For non-LPAR, we absolutely can not overwrite the mmu hash
- * table, since we are still using the bolted entries in it to
- * do the copy. Check that here.
- *
- * It is safe if the end is below the start of the blocked
- * region (end <= low), or if the beginning is after the
- * end of the blocked region (begin >= high). Use the
- * boolean identity !(a || b) === (!a && !b).
- */
- if (htab_address) {
- low = __pa(htab_address);
- high = low + htab_size_bytes;
-
- for (i = 0; i < image->nr_segments; i++) {
- begin = image->segment[i].mem;
- end = begin + image->segment[i].memsz;
-
- if ((begin < high) && (end > low))
- return -ETXTBSY;
- }
- }
-
- /* We also should not overwrite the tce tables */
- for_each_node_by_type(node, "pci") {
- basep = of_get_property(node, "linux,tce-base", NULL);
- sizep = of_get_property(node, "linux,tce-size", NULL);
- if (basep == NULL || sizep == NULL)
- continue;
-
- low = *basep;
- high = low + (*sizep);
-
- for (i = 0; i < image->nr_segments; i++) {
- begin = image->segment[i].mem;
- end = begin + image->segment[i].memsz;
-
- if ((begin < high) && (end > low))
- return -ETXTBSY;
- }
- }
-
- return 0;
-}
-
#define IND_FLAGS (IND_DESTINATION | IND_INDIRECTION | IND_DONE | IND_SOURCE)
static void copy_segments(unsigned long ind)
@@ -367,6 +301,87 @@ void default_machine_kexec(struct kimage *image)
/* NOTREACHED */
}
+#ifdef CONFIG_PPC_BOOK3E
+int default_machine_kexec_prepare(struct kimage *image)
+{
+ int i;
+ /*
+ * Since we use the kernel fault handlers and paging code to
+ * handle the virtual mode, we must make sure no destination
+ * overlaps kernel static data or bss.
+ */
+ for (i = 0; i < image->nr_segments; i++)
+ if (image->segment[i].mem < __pa(_end))
+ return -ETXTBSY;
+ return 0;
+}
+#else /* CONFIG_PPC_BOOK3E */
+int default_machine_kexec_prepare(struct kimage *image)
+{
+ int i;
+ unsigned long begin, end; /* limits of segment */
+ unsigned long low, high; /* limits of blocked memory range */
+ struct device_node *node;
+ const unsigned long *basep;
+ const unsigned int *sizep;
+
+ if (!ppc_md.hpte_clear_all)
+ return -ENOENT;
+
+ /*
+ * Since we use the kernel fault handlers and paging code to
+ * handle the virtual mode, we must make sure no destination
+ * overlaps kernel static data or bss.
+ */
+ for (i = 0; i < image->nr_segments; i++)
+ if (image->segment[i].mem < __pa(_end))
+ return -ETXTBSY;
+
+ /*
+ * For non-LPAR, we absolutely can not overwrite the mmu hash
+ * table, since we are still using the bolted entries in it to
+ * do the copy. Check that here.
+ *
+ * It is safe if the end is below the start of the blocked
+ * region (end <= low), or if the beginning is after the
+ * end of the blocked region (begin >= high). Use the
+ * boolean identity !(a || b) === (!a && !b).
+ */
+ if (htab_address) {
+ low = __pa(htab_address);
+ high = low + htab_size_bytes;
+
+ for (i = 0; i < image->nr_segments; i++) {
+ begin = image->segment[i].mem;
+ end = begin + image->segment[i].memsz;
+
+ if ((begin < high) && (end > low))
+ return -ETXTBSY;
+ }
+ }
+
+ /* We also should not overwrite the tce tables */
+ for_each_node_by_type(node, "pci") {
+ basep = of_get_property(node, "linux,tce-base", NULL);
+ sizep = of_get_property(node, "linux,tce-size", NULL);
+ if (basep == NULL || sizep == NULL)
+ continue;
+
+ low = *basep;
+ high = low + (*sizep);
+
+ for (i = 0; i < image->nr_segments; i++) {
+ begin = image->segment[i].mem;
+ end = begin + image->segment[i].memsz;
+
+ if ((begin < high) && (end > low))
+ return -ETXTBSY;
+ }
+ }
+
+ return 0;
+}
+
/* Values we need to export to the second kernel via the device tree. */
static unsigned long htab_base;
@@ -411,3 +426,4 @@ static int __init export_htab_values(void)
return 0;
}
late_initcall(export_htab_values);
+#endif /* !CONFIG_PPC_BOOK3E */
@@ -543,9 +543,13 @@ _GLOBAL(kexec_sequence)
lhz r25,PACAHWCPUID(r13) /* get our phys cpu from paca */
/* disable interrupts, we are overwriting kernel data next */
+#ifndef CONFIG_PPC_BOOK3E
mfmsr r3
rlwinm r3,r3,0,17,15
mtmsrd r3,1
+#else
+ wrteei 0
+#endif
/* copy dest pages, flush whole dest image */
mr r3,r29
@@ -567,10 +571,12 @@ _GLOBAL(kexec_sequence)
li r6,1
stw r6,kexec_flag-1b(5)
+#ifndef CONFIG_PPC_BOOK3E
/* clear out hardware hash page table and tlb */
ld r5,0(r27) /* deref function descriptor */
mtctr r5
bctrl /* ppc_md.hpte_clear_all(void); */
+#endif
/*
* kexec image calling is:
We need to active KEXEC for book3e and bypass or convert non-book3e stuff in kexec coverage. Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> --- arch/powerpc/Kconfig | 2 +- arch/powerpc/kernel/machine_kexec_64.c | 148 ++++++++++++++++++-------------- arch/powerpc/kernel/misc_64.S | 6 ++ 3 files changed, 89 insertions(+), 67 deletions(-)