diff mbox

[U-Boot] JFFS2: Fix undefined reference to `__aeabi_uldivmod' error

Message ID 526DCA54.1050806@gtsys.com.hk
State Deferred
Delegated to: Wolfgang Denk
Headers show

Commit Message

Chris Ruehl Oct. 28, 2013, 2:22 a.m. UTC 
Wolfgang,

good morning.

On Monday, October 28, 2013 04:07 AM, Wolfgang Denk wrote:
> In message <1382865251-17302-1-git-send-email-wd@denx.de> I wrote:
>> Building boards that have JFFS2 support enabled will fail when using
>> U-Boot's builtin GCC library, for example like this:
>>
>> USE_PRIVATE_LIBGCC=yes ./MAKEALL omap3_evm
>> ...
>> fs/jffs2/libjffs2.o: In function `jffs2_1pass_build_lists':
>> fs/jffs2/jffs2_1pass.c:1441: undefined reference to `__aeabi_uldivmod'
>>
>> This is caused by a u64 / u32 division in jffs2_1pass.c; the problem
>> can be avoided by using do_div() instead of plain division.
>>
>> Signed-off-by: Wolfgang Denk <wd@denx.de>
>> Reported-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
>> Cc: Chris Ruehl <chris.ruehl@gtsys.com.hk>
> I would like to withdraw this patch.
>
> It appears nobody has been running a MAKEALL with USE_PRIVATE_LIBGCC
> enabled for a long, long time.  There are a number of other places
> that show similar problems.  Instead of fixing these one by one, I
> think we should rather bundle this.
>
> I'm working on a more complete patch (or patch series).
>
> Best regards,
>
> Wolfgang Denk
>
The test of your patch works with the linaro 2013.09 tool chain.

I had to add the missing header only
#include <div64.h> which is required for the build.


cd /opt/cross_build/uboot.d/u-boot-git/spl/ && 
arm-linux-gnueabihf-ld.bfd  -T 
/opt/cross_build/uboot.d/u-boot-git/spl/u-boot-spl.lds --gc-sections 
--gc-sections -Bstatic -Ttext 0xa0000000 arch/arm/cpu/arm926ejs/start.o 
--start-group arch/arm/cpu/arm926ejs/libarm926ejs.o 
arch/arm/cpu/arm926ejs/mx27/libmx27.o 
arch/arm/imx-common/libimx-common.o arch/arm/lib/libarm.o 
board/gtsys/common/libgtsys.o board/gtsys/mx27gtsir/libmx27gtsir.o 
drivers/mtd/nand/libnand.o --end-group 
/opt/cross_build/uboot.d/u-boot-git/spl/arch/arm/lib/eabi_compat.o 
/opt/cross_build/uboot.d/u-boot-git/spl/arch/arm/lib/libgcc.o -Map 
u-boot-spl.map -o u-boot-spl
arm-linux-gnueabihf-objcopy --gap-fill=0xff -O binary 
/opt/cross_build/uboot.d/u-boot-git/spl/u-boot-spl 
/opt/cross_build/uboot.d/u-boot-git/spl/u-boot-spl.bin
make[1]: Leaving directory `/opt/cross_build/uboot.d/u-boot-git/spl'
arm-linux-gnueabihf-objcopy --gap-fill=0xff --pad-to=0x800 -I binary -O 
binary spl/u-boot-spl.bin spl/u-boot-spl-pad.bin; cat 
spl/u-boot-spl-pad.bin u-boot.bin > u-boot-with-spl.bin; rm 
spl/u-boot-spl-pad.bin


Regards
Chris

Comments

pekon gupta Nov. 22, 2013, 4:55 a.m. UTC | #1 
> From: u-boot-bounces@lists.denx.de [mailto:u-boot-
> Wolfgang,
> 
> good morning.
> 
> On Monday, October 28, 2013 04:07 AM, Wolfgang Denk wrote:
> > In message <1382865251-17302-1-git-send-email-wd@denx.de> I wrote:
> >> Building boards that have JFFS2 support enabled will fail when using
> >> U-Boot's builtin GCC library, for example like this:
> >>
> >> USE_PRIVATE_LIBGCC=yes ./MAKEALL omap3_evm
> >> ...
> >> fs/jffs2/libjffs2.o: In function `jffs2_1pass_build_lists':
> >> fs/jffs2/jffs2_1pass.c:1441: undefined reference to `__aeabi_uldivmod'
> >>
> >> This is caused by a u64 / u32 division in jffs2_1pass.c; the problem
> >> can be avoided by using do_div() instead of plain division.
> >>
> >> Signed-off-by: Wolfgang Denk <wd@denx.de>
> >> Reported-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
> >> Cc: Chris Ruehl <chris.ruehl@gtsys.com.hk>
> > I would like to withdraw this patch.
> >
> > It appears nobody has been running a MAKEALL with
> USE_PRIVATE_LIBGCC
> > enabled for a long, long time.  There are a number of other places
> > that show similar problems.  Instead of fixing these one by one, I
> > think we should rather bundle this.
> >
> > I'm working on a more complete patch (or patch series).
> >
> > Best regards,
> >
> > Wolfgang Denk
> >
> The test of your patch works with the linaro 2013.09 tool chain.
> 
> I had to add the missing header only
> #include <div64.h> which is required for the build.
> 
> diff --git a/fs/jffs2/jffs2_1pass.c b/fs/jffs2/jffs2_1pass.c
> index c856983..e6b50de 100644
> --- a/fs/jffs2/jffs2_1pass.c
> +++ b/fs/jffs2/jffs2_1pass.c
> @@ -121,6 +121,7 @@
>   #include <jffs2/jffs2_1pass.h>
>   #include <linux/compat.h>
>   #include <asm/errno.h>
> +#include <div64.h>
> 
>   #include "jffs2_private.h"
> 
> @@ -1438,7 +1439,7 @@ jffs2_1pass_build_lists(struct part_info * part)
>   {
>          struct b_lists *pL;
>          struct jffs2_unknown_node *node;
> -       u32 nr_sectors = part->size/part->sector_size;
> +       u32 nr_sectors = do_div(part->size,part->sector_size);
>          u32 i;
>          u32 counter4 = 0;
>          u32 counterF = 0;
> 

Thanks for fixing this..
Tested-by: Pekon Gupta <pekon@ti.com>

Please merge this soon, so that ./MAKEALL is clean.

With regards, pekon
diff mbox

Patch

diff --git a/fs/jffs2/jffs2_1pass.c b/fs/jffs2/jffs2_1pass.c
index c856983..e6b50de 100644
--- a/fs/jffs2/jffs2_1pass.c
+++ b/fs/jffs2/jffs2_1pass.c
@@ -121,6 +121,7 @@ 
  #include <jffs2/jffs2_1pass.h>
  #include <linux/compat.h>
  #include <asm/errno.h>
+#include <div64.h>

  #include "jffs2_private.h"

@@ -1438,7 +1439,7 @@  jffs2_1pass_build_lists(struct part_info * part)
  {
         struct b_lists *pL;
         struct jffs2_unknown_node *node;
-       u32 nr_sectors = part->size/part->sector_size;
+       u32 nr_sectors = do_div(part->size,part->sector_size);
         u32 i;
         u32 counter4 = 0;
         u32 counterF = 0;