[3/3] can: mcp251x: Add device tree support

This patch adds Device Tree support to the Microchip MCP251X driver.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 .../bindings/net/can/microchip,mcp251x.txt         | 25 ++++++++++
 drivers/net/can/mcp251x.c                          | 57 ++++++++++++++++------
 2 files changed, 66 insertions(+), 16 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt

On 11/13/2013 09:45 AM, Alexander Shiyan wrote:
> This patch adds Device Tree support to the Microchip MCP251X driver.
> 
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> ---
>  .../bindings/net/can/microchip,mcp251x.txt         | 25 ++++++++++
>  drivers/net/can/mcp251x.c                          | 57 ++++++++++++++++------
>  2 files changed, 66 insertions(+), 16 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
> 
> diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
> new file mode 100644
> index 0000000..06d95ee
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
> @@ -0,0 +1,25 @@
> +* Microchip MCP251X device tree bindings
> +
> +Registers a Microchip MCP251X stand-alone CAN controller connected to SPI bus.
> +
> +Required properties:
> + - compatible: Should be one of the following:
> +   - "microchip,mcp2510" for MCP2510.
> +   - "microchip,mcp2515" for MCP2515.
> + - reg: SPI chip select.
> + - clocks: The clock feeding the CAN controller.
> + - interrupt-parent: The parent interrupt controller.
> + - interrupts: Should contain IRQ line for the CAN controller.
> +
> +Optional properties:
> + - vdd-supply: Regulator that powers the CAN controller.
> + - xceiver-supply: Regulator that powers the CAN transceiver.
> +
> +Example:
> +	can0: can@1 {
> +		compatible = "microchip,mcp2515";
> +		reg = <1>;
> +		clocks = <&clk24m>;
> +		interrupt-parent = <&gpio4>;
> +		interrupts = <13 0x2>;
> +	};
> diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c
> index 8e133aa..9aa2822 100644
> --- a/drivers/net/can/mcp251x.c
> +++ b/drivers/net/can/mcp251x.c
> @@ -60,6 +60,8 @@
>  #include <linux/kernel.h>
>  #include <linux/module.h>
>  #include <linux/netdevice.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
>  #include <linux/platform_device.h>
>  #include <linux/slab.h>
>  #include <linux/spi/spi.h>
> @@ -987,10 +989,38 @@ static const struct net_device_ops mcp251x_netdev_ops = {
>  	.ndo_start_xmit = mcp251x_hard_start_xmit,
>  };
>  
> +static struct of_device_id mcp251x_of_match[] = {
> +	{
> +		.compatible	= "microchip,mcp2510",
> +		.data		= (void *)CAN_MCP251X_MCP2510,
> +	},
> +	{
> +		.compatible	= "microchip,mcp2515",
> +		.data		= (void *)CAN_MCP251X_MCP2515,
> +	},
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, mcp251x_of_match);
> +
> +static const struct spi_device_id mcp251x_id_table[] = {
> +	{
> +		.name		= "mcp2510",
> +		.driver_data	= (kernel_ulong_t)CAN_MCP251X_MCP2510,
> +	},
> +	{
> +		.name		= "mcp2515",
> +		.driver_data	= (kernel_ulong_t)CAN_MCP251X_MCP2515,
> +	},
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(spi, mcp251x_id_table);
> +
>  static int mcp251x_can_probe(struct spi_device *spi)
>  {
>  	struct net_device *net;
>  	struct mcp251x_priv *priv;
> +	const struct of_device_id *of_id = of_match_device(mcp251x_of_match,
> +							   &spi->dev);
>  	int ret;
>  
>  	/* Allocate can/net device */
> @@ -1017,7 +1047,10 @@ static int mcp251x_can_probe(struct spi_device *spi)
>  	priv->can.clock.freq = clk_get_rate(priv->clk) / 2;
>  	priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES |
>  		CAN_CTRLMODE_LOOPBACK | CAN_CTRLMODE_LISTENONLY;
> -	priv->model = spi_get_device_id(spi)->driver_data;
> +	if (of_id)
> +		priv->model = (enum mcp251x_model)of_id->data;
> +	else
> +		priv->model = spi_get_device_id(spi)->driver_data;
>  	priv->net = net;
>  
>  	priv->power = devm_regulator_get(&spi->dev, "vdd");
> @@ -1198,24 +1231,16 @@ static int mcp251x_can_resume(struct device *dev)
>  static SIMPLE_DEV_PM_OPS(mcp251x_can_pm_ops, mcp251x_can_suspend,
>  	mcp251x_can_resume);
>  
> -static const struct spi_device_id mcp251x_id_table[] = {
> -	{ "mcp2510",	CAN_MCP251X_MCP2510 },
> -	{ "mcp2515",	CAN_MCP251X_MCP2515 },
> -	{ },
> -};
> -
> -MODULE_DEVICE_TABLE(spi, mcp251x_id_table);
> -
>  static struct spi_driver mcp251x_can_driver = {
>  	.driver = {
> -		.name = DEVICE_NAME,
> -		.owner = THIS_MODULE,
> -		.pm = &mcp251x_can_pm_ops,
> +		.name		= DEVICE_NAME,
> +		.owner		= THIS_MODULE,
> +		.of_match_table	= of_match_ptr(mcp251x_of_match),
> +		.pm		= &mcp251x_can_pm_ops,
>  	},
> -
> -	.id_table = mcp251x_id_table,
> -	.probe = mcp251x_can_probe,
> -	.remove = mcp251x_can_remove,
> +	.id_table	= mcp251x_id_table,
> +	.probe		= mcp251x_can_probe,
> +	.remove		= mcp251x_can_remove,

Please don't reformat this. I personally don't like alignment here, as
it tends to be to short if another member is added to the struct.

Looks good otherwise, please add my:

Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>

Marc

>  };
>  module_spi_driver(mcp251x_can_driver);
>  
>

On Nov 13, 2013, at 2:45 AM, Alexander Shiyan <shc_work@mail.ru> wrote:

> This patch adds Device Tree support to the Microchip MCP251X driver.
> 
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> ---
> .../bindings/net/can/microchip,mcp251x.txt         | 25 ++++++++++
> drivers/net/can/mcp251x.c                          | 57 ++++++++++++++++------
> 2 files changed, 66 insertions(+), 16 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
> 
> diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
> new file mode 100644
> index 0000000..06d95ee
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
> @@ -0,0 +1,25 @@
> +* Microchip MCP251X device tree bindings
> +
> +Registers a Microchip MCP251X stand-alone CAN controller connected to SPI bus.

“Register a” doesn’t seem like it should be in a binding spec.

> +
> +Required properties:
> + - compatible: Should be one of the following:
> +   - "microchip,mcp2510" for MCP2510.
> +   - "microchip,mcp2515" for MCP2515.
> + - reg: SPI chip select.
> + - clocks: The clock feeding the CAN controller.
> + - interrupt-parent: The parent interrupt controller.
> + - interrupts: Should contain IRQ line for the CAN controller.
> +
> +Optional properties:
> + - vdd-supply: Regulator that powers the CAN controller.
> + - xceiver-supply: Regulator that powers the CAN transceiver.
> +
> +Example:
> +	can0: can@1 {
> +		compatible = "microchip,mcp2515";
> +		reg = <1>;
> +		clocks = <&clk24m>;
> +		interrupt-parent = <&gpio4>;
> +		interrupts = <13 0x2>;

Usually good to have example show all properties used (even optional ones)

> +	};

Other than the nits, binding looks good.

- k