@@ -55,6 +55,8 @@ static block_dev_desc_t scsi_dev_desc[CONFIG_SYS_SCSI_MAX_DEVICE];
void scsi_setup_test_unit_ready(ccb * pccb);
void scsi_setup_read6(ccb * pccb, lbaint_t start, unsigned short blocks);
void scsi_setup_read_ext(ccb * pccb, lbaint_t start, unsigned short blocks);
+void scsi_setup_read16(ccb * pccb, lbaint_t start, unsigned long blocks);
+
static void scsi_setup_write_ext(ccb *pccb, lbaint_t start,
unsigned short blocks);
void scsi_setup_inquiry(ccb * pccb);
@@ -362,6 +364,7 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
/* almost the maximum amount of the scsi_ext command.. */
#define SCSI_MAX_READ_BLK 0xFFFF
+#define SCSI_LBA48_READ 0xFFFFFFF
static ulong scsi_read(int device, lbaint_t blknr, lbaint_t blkcnt,
void *buffer)
@@ -383,7 +386,14 @@ static ulong scsi_read(int device, lbaint_t blknr, lbaint_t blkcnt,
device, start, blks, (unsigned long) buffer);
do {
pccb->pdata = (unsigned char *) buf_addr;
- if (blks > SCSI_MAX_READ_BLK) {
+ if (start > SCSI_LBA48_READ) {
+ unsigned long blocks;
+ blocks = min(blks, SCSI_MAX_READ_BLK);
+ pccb->datalen = scsi_dev_desc[device].blksz * blocks;
+ scsi_setup_read16(pccb, start, blocks);
+ start += blocks;
+ blks -= blocks;
+ } else if (blks > SCSI_MAX_READ_BLK) {
pccb->datalen = scsi_dev_desc[device].blksz *
SCSI_MAX_READ_BLK;
smallblks = SCSI_MAX_READ_BLK;
@@ -583,6 +593,35 @@ void scsi_setup_test_unit_ready(ccb * pccb)
pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
}
+void scsi_setup_read16(ccb * pccb, lbaint_t start, unsigned long blocks)
+{
+ pccb->cmd[0] = SCSI_READ16;
+ pccb->cmd[1] = pccb->lun<<5;
+ pccb->cmd[2] = ((unsigned char) (start >> 56)) & 0xff;
+ pccb->cmd[3] = ((unsigned char) (start >> 48)) & 0xff;
+ pccb->cmd[4] = ((unsigned char) (start >> 40)) & 0xff;
+ pccb->cmd[5] = ((unsigned char) (start >> 32)) & 0xff;
+ pccb->cmd[6] = ((unsigned char) (start >> 24)) & 0xff;
+ pccb->cmd[7] = ((unsigned char) (start >> 16)) & 0xff;
+ pccb->cmd[8] = ((unsigned char) (start >> 8)) & 0xff;
+ pccb->cmd[9] = ((unsigned char) (start)) & 0xff;
+ pccb->cmd[10] = 0;
+ pccb->cmd[11] = ((unsigned char) (blocks >> 24)) & 0xff;
+ pccb->cmd[12] = ((unsigned char) (blocks >> 16)) & 0xff;
+ pccb->cmd[13] = ((unsigned char) (blocks >> 8)) & 0xff;
+ pccb->cmd[14] = (unsigned char) blocks & 0xff;
+ pccb->cmd[15] = 0;
+ pccb->cmdlen = 16;
+ pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
+ debug ("scsi_setup_read16: cmd: %02X %02X "
+ "startblk %02X%02X%02X%02X%02X%02X%02X%02X "
+ "blccnt %02X%02X%02X%02X\n",
+ pccb->cmd[0], pccb->cmd[1],
+ pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5],
+ pccb->cmd[6], pccb->cmd[7], pccb->cmd[8], pccb->cmd[9],
+ pccb->cmd[11], pccb->cmd[12], pccb->cmd[13], pccb->cmd[14]);
+}
+
void scsi_setup_read_ext(ccb * pccb, lbaint_t start, unsigned short blocks)
{
pccb->cmd[0] = SCSI_READ10;
@@ -669,18 +669,25 @@ static int ata_scsiop_inquiry(ccb *pccb)
*/
static int ata_scsiop_read_write(ccb *pccb, u8 is_write)
{
- u32 lba = 0;
+ lbaint_t lba = 0;
u16 blocks = 0;
u8 fis[20];
u8 *user_buffer = pccb->pdata;
u32 user_buffer_size = pccb->datalen;
/* Retrieve the base LBA number from the ccb structure. */
- memcpy(&lba, pccb->cmd + 2, sizeof(lba));
- lba = be32_to_cpu(lba);
+ if (pccb->cmd[0] == SCSI_READ16) {
+ memcpy(&lba, pccb->cmd + 2, 8);
+ lba = be64_to_cpu(lba);
+ } else {
+ u32 temp;
+ memcpy(&temp, pccb->cmd + 2, 4);
+ lba = be32_to_cpu(temp);
+ }
/*
- * And the number of blocks.
+ * Retrieve the base LBA number and the block count from
+ * the ccb structure.
*
* For 10-byte and 16-byte SCSI R/W commands, transfer
* length 0 means transfer 0 block of data.
@@ -689,10 +696,13 @@ static int ata_scsiop_read_write(ccb *pccb, u8 is_write)
*
* WARNING: one or two older ATA drives treat 0 as 0...
*/
- blocks = (((u16)pccb->cmd[7]) << 8) | ((u16) pccb->cmd[8]);
+ if (pccb->cmd[0] == SCSI_READ16)
+ blocks = (((u16)pccb->cmd[13]) << 8) | ((u16) pccb->cmd[14]);
+ else
+ blocks = (((u16)pccb->cmd[7]) << 8) | ((u16) pccb->cmd[8]);
- debug("scsi_ahci: %s %d blocks starting from lba 0x%x\n",
- is_write ? "write" : "read", (unsigned)lba, blocks);
+ debug("scsi_ahci: %s %u blocks starting from lba 0x" LBAFU "\n",
+ is_write ? "write" : "read", blocks, lba);
/* Preset the FIS */
memset(fis, 0, sizeof(fis));
@@ -721,6 +731,11 @@ static int ata_scsiop_read_write(ccb *pccb, u8 is_write)
fis[6] = (lba >> 16) & 0xff;
fis[7] = 1 << 6; /* device reg: set LBA mode */
fis[8] = ((lba >> 24) & 0xff);
+ if (pccb->cmd[0] == SCSI_READ16) {
+ fis[9] = ((lba >> 32) & 0xff);
+ fis[10] = ((lba >> 40) & 0xff);
+ }
+
fis[3] = 0xe0; /* features */
/* Block (sector) count */
@@ -826,6 +841,7 @@ int scsi_exec(ccb *pccb)
int ret;
switch (pccb->cmd[0]) {
+ case SCSI_READ16:
case SCSI_READ10:
ret = ata_scsiop_read_write(pccb, 0);
break;
@@ -132,6 +132,7 @@ typedef struct SCSI_cmd_block{
#define SCSI_MED_REMOVL 0x1E /* Prevent/Allow medium Removal (O) */
#define SCSI_READ6 0x08 /* Read 6-byte (MANDATORY) */
#define SCSI_READ10 0x28 /* Read 10-byte (MANDATORY) */
+#define SCSI_READ16 0x48
#define SCSI_RD_CAPAC 0x25 /* Read Capacity (MANDATORY) */
#define SCSI_RD_CAPAC10 SCSI_RD_CAPAC /* Read Capacity (10) */
#define SCSI_RD_CAPAC16 0x9e /* Read Capacity (16) */
Enable full 48-bit LBA48 data reads by passing the upper word of the LBA block pointer in bytes 9 and 10 of the FIS. This allows uboot to load data from any arbitrary sector on a drive with 2 or more TB of available data connected to an AHCI controller. Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> --- common/cmd_scsi.c | 41 ++++++++++++++++++++++++++++++++++++++++- drivers/block/ahci.c | 30 +++++++++++++++++++++++------- include/scsi.h | 1 + 3 files changed, 64 insertions(+), 8 deletions(-)