diff mbox

[U-Boot] am33xx: Stop modifying certain EMIF4D registers

Message ID 1383842577-8501-1-git-send-email-trini@ti.com
State Accepted
Delegated to: Tom Rini
Headers show

Commit Message

Tom Rini Nov. 7, 2013, 4:42 p.m. UTC 
Based on the definitive guide to EMIF configuration[1] certain registers
that we have been modifying (and are documented registers) should be
left in their reset values rather than modified.  This has been tested
on AM335x GP EVM and Beaglebone White.

[1]: http://processors.wiki.ti.com/index.php/AM335x_EMIF_Configuration_tips
Cc: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Heiko Schocher <hs@denx.de>
Cc: Matt Porter <matt.porter@linaro.org>
Cc: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Tom Rini <trini@ti.com>
---
 arch/arm/cpu/armv7/am33xx/ddr.c             |    7 ------
 arch/arm/include/asm/arch-am33xx/ddr_defs.h |   31 ++++++---------------------
 board/isee/igep0033/board.c                 |    4 ----
 board/phytec/pcm051/board.c                 |    4 ----
 board/siemens/dxr2/board.c                  |    4 ----
 board/siemens/pxm2/board.c                  |    5 -----
 board/siemens/rut/board.c                   |    5 -----
 board/ti/am335x/board.c                     |   17 ---------------
 board/ti/ti814x/evm.c                       |    5 -----
 board/ti/ti816x/evm.c                       |   17 ---------------
 10 files changed, 6 insertions(+), 93 deletions(-)

Comments

Vaibhav Bedia Nov. 7, 2013, 9:12 p.m. UTC | #1 
Hi Tom,

On Thu, Nov 7, 2013 at 11:42 AM, Tom Rini <trini@ti.com> wrote:
> Based on the definitive guide to EMIF configuration[1] certain registers
> that we have been modifying (and are documented registers) should be
> left in their reset values rather than modified.  This has been tested
> on AM335x GP EVM and Beaglebone White.
>

[...]

> diff --git a/board/ti/ti814x/evm.c b/board/ti/ti814x/evm.c
> index e406326..0b76a77 100644
> --- a/board/ti/ti814x/evm.c
> +++ b/board/ti/ti814x/evm.c
> @@ -33,15 +33,12 @@ static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
>  #ifdef CONFIG_SPL_BUILD
>  static const struct cmd_control evm_ddr2_cctrl_data = {
>         .cmd0csratio    = 0x80,
> -       .cmd0dldiff     = 0x04,
>         .cmd0iclkout    = 0x00,
>
>         .cmd1csratio    = 0x80,
> -       .cmd1dldiff     = 0x04,
>         .cmd1iclkout    = 0x00,
>
>         .cmd2csratio    = 0x80,
> -       .cmd2dldiff     = 0x04,
>         .cmd2iclkout    = 0x00,
>  };
>
> @@ -77,8 +74,6 @@ static const struct ddr_data evm_ddr2_data = {
>         .datagiratio0           = ((0<<10) | (0<<0)),
>         .datafwsratio0          = ((0x90<<10) | (0x90<<0)),
>         .datawrsratio0          = ((0x50<<10) | (0x50<<0)),
> -       .datauserank0delay      = 1,
> -       .datadldiff0            = 0x4,
>  };
>
>  void set_uart_mux_conf(void)
> diff --git a/board/ti/ti816x/evm.c b/board/ti/ti816x/evm.c
> index 74d35e9..a53859e 100644
> --- a/board/ti/ti816x/evm.c
> +++ b/board/ti/ti816x/evm.c
> @@ -59,21 +59,16 @@ static struct ddr_data ddr2_data = {
>         .datagiratio0           = ((0x0<<10) | (0x0<<0)),
>         .datafwsratio0          = ((0x13A<<10) | (0x13A<<0)),
>         .datawrsratio0          = ((0x8A<<10) | (0x8A<<0)),
> -       .datauserank0delay      = 0x1,
> -       .datadldiff0            = 0x0, /* depend on cpu rev, set later */
>  };
>
>  static struct cmd_control ddr2_ctrl = {
>         .cmd0csratio    = 0x80,
> -       .cmd0dldiff     = 0x04, /* reset value is 0x4 */
>         .cmd0iclkout    = 0x00,
>
>         .cmd1csratio    = 0x80,
> -       .cmd1dldiff     = 0x04, /* reset value is 0x4 */
>         .cmd1iclkout    = 0x00,
>
>         .cmd2csratio    = 0x80,
> -       .cmd2dldiff     = 0x04, /* reset value is 0x4 */
>         .cmd2iclkout    = 0x00,
>
>  };
> @@ -150,21 +145,16 @@ static struct ddr_data ddr3_data = {
>         .datagiratio0           = ((0x20<<10) | 0x20<<0),
>         .datafwsratio0          = ((RD_DQS_GATE<<10) | (RD_DQS_GATE<<0)),
>         .datawrsratio0          = (((WR_DQS+0x40)<<10) | ((WR_DQS+0x40)<<0)),
> -       .datauserank0delay      = 0x1,
> -       .datadldiff0            = 0x0, /* depend on cpu rev, set later */
>  };
>
>  static const struct cmd_control ddr3_ctrl = {
>         .cmd0csratio    = 0x100,
> -       .cmd0dldiff     = 0x004, /* reset value is 0x4 */
>         .cmd0iclkout    = 0x001,
>
>         .cmd1csratio    = 0x100,
> -       .cmd1dldiff     = 0x004, /* reset value is 0x4 */
>         .cmd1iclkout    = 0x001,
>
>         .cmd2csratio    = 0x100,
> -       .cmd2dldiff     = 0x004, /* reset value is 0x4 */
>         .cmd2iclkout    = 0x001,
>  };
>
> @@ -198,11 +188,6 @@ void sdram_init(void)
>         config_dmm(&evm_lisa_map_regs);
>
>  #ifdef CONFIG_TI816X_EVM_DDR2
> -       ddr2_data.datadldiff0 = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
> -       ddr2_ctrl.cmd0dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
> -       ddr2_ctrl.cmd1dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
> -       ddr2_ctrl.cmd2dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
> -
>         if (CONFIG_TI816X_USE_EMIF0) {
>                 ddr2_emif0_regs.emif_ddr_phy_ctlr_1 =
>                         (get_cpu_rev() == 0x1 ? 0x0000010B : 0x0000030B);
> @@ -217,8 +202,6 @@ void sdram_init(void)
>  #endif
>
>  #ifdef CONFIG_TI816X_EVM_DDR3
> -       ddr3_data.datadldiff0 = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
> -

From a quick glance it looks like at least earlier variants of TI81xx
used these registers to work around some bugs? This might end up
breaking those. Note that TI81xx DDR frequencies are much higher
compared to AM335x so issues related to this might not show up
right now.

Regards,
Vaibhav
Tom Rini Nov. 7, 2013, 9:16 p.m. UTC | #2 
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 11/07/2013 04:12 PM, Vaibhav Bedia wrote:
> Hi Tom,
> 
> On Thu, Nov 7, 2013 at 11:42 AM, Tom Rini <trini@ti.com> wrote:
>> Based on the definitive guide to EMIF configuration[1] certain registers
>> that we have been modifying (and are documented registers) should be
>> left in their reset values rather than modified.  This has been tested
>> on AM335x GP EVM and Beaglebone White.
>>
> 
> [...]
[snip]
>> @@ -198,11 +188,6 @@ void sdram_init(void)
>>         config_dmm(&evm_lisa_map_regs);
>>
>>  #ifdef CONFIG_TI816X_EVM_DDR2
>> -       ddr2_data.datadldiff0 = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
>> -       ddr2_ctrl.cmd0dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
>> -       ddr2_ctrl.cmd1dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
>> -       ddr2_ctrl.cmd2dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
>> -
>>         if (CONFIG_TI816X_USE_EMIF0) {
>>                 ddr2_emif0_regs.emif_ddr_phy_ctlr_1 =
>>                         (get_cpu_rev() == 0x1 ? 0x0000010B : 0x0000030B);
>> @@ -217,8 +202,6 @@ void sdram_init(void)
>>  #endif
>>
>>  #ifdef CONFIG_TI816X_EVM_DDR3
>> -       ddr3_data.datadldiff0 = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
>> -
> 
> From a quick glance it looks like at least earlier variants of TI81xx
> used these registers to work around some bugs? This might end up
> breaking those. Note that TI81xx DDR frequencies are much higher
> compared to AM335x so issues related to this might not show up
> right now.

It's an open question on if TI81xx needs these set or was simply also
setting them for historical reasons (and in turn was inherited by am335x).

- -- 
Tom
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
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=XIox
-----END PGP SIGNATURE-----
Matt Porter Nov. 7, 2013, 9:24 p.m. UTC | #3 
On Thu, Nov 07, 2013 at 04:16:40PM -0500, Tom Rini wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> On 11/07/2013 04:12 PM, Vaibhav Bedia wrote:
> > Hi Tom,
> > 
> > On Thu, Nov 7, 2013 at 11:42 AM, Tom Rini <trini@ti.com> wrote:
> >> Based on the definitive guide to EMIF configuration[1] certain registers
> >> that we have been modifying (and are documented registers) should be
> >> left in their reset values rather than modified.  This has been tested
> >> on AM335x GP EVM and Beaglebone White.
> >>
> > 
> > [...]
> [snip]
> >> @@ -198,11 +188,6 @@ void sdram_init(void)
> >>         config_dmm(&evm_lisa_map_regs);
> >>
> >>  #ifdef CONFIG_TI816X_EVM_DDR2
> >> -       ddr2_data.datadldiff0 = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
> >> -       ddr2_ctrl.cmd0dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
> >> -       ddr2_ctrl.cmd1dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
> >> -       ddr2_ctrl.cmd2dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
> >> -
> >>         if (CONFIG_TI816X_USE_EMIF0) {
> >>                 ddr2_emif0_regs.emif_ddr_phy_ctlr_1 =
> >>                         (get_cpu_rev() == 0x1 ? 0x0000010B : 0x0000030B);
> >> @@ -217,8 +202,6 @@ void sdram_init(void)
> >>  #endif
> >>
> >>  #ifdef CONFIG_TI816X_EVM_DDR3
> >> -       ddr3_data.datadldiff0 = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
> >> -
> > 
> > From a quick glance it looks like at least earlier variants of TI81xx
> > used these registers to work around some bugs? This might end up
> > breaking those. Note that TI81xx DDR frequencies are much higher
> > compared to AM335x so issues related to this might not show up
> > right now.
> 
> It's an open question on if TI81xx needs these set or was simply also
> setting them for historical reasons (and in turn was inherited by am335x).

I will doublecheck on my early TI8148...out of time today but tomorrow.

-Matt
Matt Porter Nov. 15, 2013, 6:04 p.m. UTC | #4 
On Thu, Nov 07, 2013 at 11:42:57AM -0500, Tom Rini wrote:
> Based on the definitive guide to EMIF configuration[1] certain registers
> that we have been modifying (and are documented registers) should be
> left in their reset values rather than modified.  This has been tested
> on AM335x GP EVM and Beaglebone White.
> 
> [1]: http://processors.wiki.ti.com/index.php/AM335x_EMIF_Configuration_tips
> Cc: Enric Balletbo i Serra <eballetbo@iseebcn.com>
> Cc: Javier Martinez Canillas <javier@dowhile0.org>
> Cc: Heiko Schocher <hs@denx.de>
> Cc: Matt Porter <matt.porter@linaro.org>
> Cc: Lars Poeschel <poeschel@lemonage.de>
> Signed-off-by: Tom Rini <trini@ti.com>
> ---
>  arch/arm/cpu/armv7/am33xx/ddr.c             |    7 ------
>  arch/arm/include/asm/arch-am33xx/ddr_defs.h |   31 ++++++---------------------
>  board/isee/igep0033/board.c                 |    4 ----
>  board/phytec/pcm051/board.c                 |    4 ----
>  board/siemens/dxr2/board.c                  |    4 ----
>  board/siemens/pxm2/board.c                  |    5 -----
>  board/siemens/rut/board.c                   |    5 -----
>  board/ti/am335x/board.c                     |   17 ---------------
>  board/ti/ti814x/evm.c                       |    5 -----
>  board/ti/ti816x/evm.c                       |   17 ---------------
>  10 files changed, 6 insertions(+), 93 deletions(-)

Working on my PG1.0 TI814x EVM

Tested-by: Matt Porter <matt.porter@linaro.org>

-Matt
Vaibhav Bedia Nov. 18, 2013, 8:44 p.m. UTC | #5 
Hi,

On Thu, Nov 7, 2013 at 4:16 PM, Tom Rini <trini@ti.com> wrote:
>
> It's an open question on if TI81xx needs these set or was simply also
> setting them for historical reasons (and in turn was inherited by am335x).
>

Based on Matt's test TI814x looks ok. I recall putting this code there
for PG1.0 of TI8168 but i'm not sure if that version of silicon is out in
the wild. If someone reports any issues with TI8168 it should be trivial
to add this back in. For now this change looks fine to me.

Regards,
Vaibhav
Tom Rini Dec. 4, 2013, 10:03 p.m. UTC | #6 
On Thu, Nov 07, 2013 at 11:42:57AM -0500, Tom Rini wrote:

> Based on the definitive guide to EMIF configuration[1] certain registers
> that we have been modifying (and are documented registers) should be
> left in their reset values rather than modified.  This has been tested
> on AM335x GP EVM and Beaglebone White.
> 
> [1]: http://processors.wiki.ti.com/index.php/AM335x_EMIF_Configuration_tips
> Cc: Enric Balletbo i Serra <eballetbo@iseebcn.com>
> Cc: Javier Martinez Canillas <javier@dowhile0.org>
> Cc: Heiko Schocher <hs@denx.de>
> Cc: Matt Porter <matt.porter@linaro.org>
> Cc: Lars Poeschel <poeschel@lemonage.de>
> Signed-off-by: Tom Rini <trini@ti.com>
> Tested-by: Matt Porter <matt.porter@linaro.org>

Applied to u-boot-ti/master, after covering a few new boards too, thanks!
diff mbox

Patch

diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/cpu/armv7/am33xx/ddr.c
index fa697c7..5b0454c 100644
--- a/arch/arm/cpu/armv7/am33xx/ddr.c
+++ b/arch/arm/cpu/armv7/am33xx/ddr.c
@@ -89,15 +89,12 @@  void config_ddr_phy(const struct emif_regs *regs, int nr)
 void config_cmd_ctrl(const struct cmd_control *cmd, int nr)
 {
 	writel(cmd->cmd0csratio, &ddr_cmd_reg[nr]->cm0csratio);
-	writel(cmd->cmd0dldiff, &ddr_cmd_reg[nr]->cm0dldiff);
 	writel(cmd->cmd0iclkout, &ddr_cmd_reg[nr]->cm0iclkout);
 
 	writel(cmd->cmd1csratio, &ddr_cmd_reg[nr]->cm1csratio);
-	writel(cmd->cmd1dldiff, &ddr_cmd_reg[nr]->cm1dldiff);
 	writel(cmd->cmd1iclkout, &ddr_cmd_reg[nr]->cm1iclkout);
 
 	writel(cmd->cmd2csratio, &ddr_cmd_reg[nr]->cm2csratio);
-	writel(cmd->cmd2dldiff, &ddr_cmd_reg[nr]->cm2dldiff);
 	writel(cmd->cmd2iclkout, &ddr_cmd_reg[nr]->cm2iclkout);
 }
 
@@ -121,10 +118,6 @@  void config_ddr_data(const struct ddr_data *data, int nr)
 			&(ddr_data_reg[nr]+i)->dt0fwsratio0);
 		writel(data->datawrsratio0,
 			&(ddr_data_reg[nr]+i)->dt0wrsratio0);
-		writel(data->datauserank0delay,
-			&(ddr_data_reg[nr]+i)->dt0rdelays0);
-		writel(data->datadldiff0,
-			&(ddr_data_reg[nr]+i)->dt0dldiff0);
 	}
 }
 
diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
index fe48b5f..e5bda64 100644
--- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h
+++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
@@ -18,7 +18,6 @@ 
 #define VTP_CTRL_READY		(0x1 << 5)
 #define VTP_CTRL_ENABLE		(0x1 << 6)
 #define VTP_CTRL_START_EN	(0x1)
-#define PHY_DLL_LOCK_DIFF	0x0
 #define DDR_CKE_CTRL_NORMAL	0x1
 #define PHY_EN_DYN_PWRDN	(0x1 << 20)
 
@@ -29,7 +28,6 @@ 
 #define MT47H128M16RT25E_EMIF_TIM3		0x0000033F
 #define MT47H128M16RT25E_EMIF_SDCFG		0x41805332
 #define MT47H128M16RT25E_EMIF_SDREF		0x0000081a
-#define MT47H128M16RT25E_DLL_LOCK_DIFF		0x0
 #define MT47H128M16RT25E_RATIO			0x80
 #define MT47H128M16RT25E_INVERT_CLKOUT		0x00
 #define MT47H128M16RT25E_RD_DQS			0x12
@@ -38,7 +36,6 @@ 
 #define MT47H128M16RT25E_PHY_GATELVL		0x00
 #define MT47H128M16RT25E_PHY_WR_DATA		0x40
 #define MT47H128M16RT25E_PHY_FIFO_WE		0x80
-#define MT47H128M16RT25E_PHY_RANK0_DELAY		0x1
 #define MT47H128M16RT25E_IOCTRL_VALUE		0x18B
 
 /* Micron MT41J128M16JT-125 */
@@ -49,7 +46,6 @@ 
 #define MT41J128MJT125_EMIF_SDCFG		0x61C04AB2
 #define MT41J128MJT125_EMIF_SDREF		0x0000093B
 #define MT41J128MJT125_ZQ_CFG			0x50074BE4
-#define MT41J128MJT125_DLL_LOCK_DIFF		0x1
 #define MT41J128MJT125_RATIO			0x40
 #define MT41J128MJT125_INVERT_CLKOUT		0x1
 #define MT41J128MJT125_RD_DQS			0x3B
@@ -66,7 +62,6 @@ 
 #define MT41J256M8HX15E_EMIF_SDCFG		0x61C04B32
 #define MT41J256M8HX15E_EMIF_SDREF		0x0000093B
 #define MT41J256M8HX15E_ZQ_CFG			0x50074BE4
-#define MT41J256M8HX15E_DLL_LOCK_DIFF		0x1
 #define MT41J256M8HX15E_RATIO			0x40
 #define MT41J256M8HX15E_INVERT_CLKOUT		0x1
 #define MT41J256M8HX15E_RD_DQS			0x3B
@@ -83,7 +78,6 @@ 
 #define MT41K256M16HA125E_EMIF_SDCFG		0x61C05332
 #define MT41K256M16HA125E_EMIF_SDREF		0xC30
 #define MT41K256M16HA125E_ZQ_CFG		0x50074BE4
-#define MT41K256M16HA125E_DLL_LOCK_DIFF		0x1
 #define MT41K256M16HA125E_RATIO			0x80
 #define MT41K256M16HA125E_INVERT_CLKOUT		0x0
 #define MT41K256M16HA125E_RD_DQS		0x38
@@ -100,7 +94,6 @@ 
 #define MT41J512M8RH125_EMIF_SDCFG		0x61C04BB2
 #define MT41J512M8RH125_EMIF_SDREF		0x0000093B
 #define MT41J512M8RH125_ZQ_CFG			0x50074BE4
-#define MT41J512M8RH125_DLL_LOCK_DIFF		0x1
 #define MT41J512M8RH125_RATIO			0x80
 #define MT41J512M8RH125_INVERT_CLKOUT		0x0
 #define MT41J512M8RH125_RD_DQS			0x3B
@@ -117,7 +110,6 @@ 
 #define K4B2G1646EBIH9_EMIF_SDCFG		0x61C052B2
 #define K4B2G1646EBIH9_EMIF_SDREF		0x00000C30
 #define K4B2G1646EBIH9_ZQ_CFG			0x50074BE4
-#define K4B2G1646EBIH9_DLL_LOCK_DIFF		0x1
 #define K4B2G1646EBIH9_RATIO			0x80
 #define K4B2G1646EBIH9_INVERT_CLKOUT		0x0
 #define K4B2G1646EBIH9_RD_DQS			0x35
@@ -149,18 +141,15 @@  void config_ddr_phy(const struct emif_regs *regs, int nr);
 struct ddr_cmd_regs {
 	unsigned int resv0[7];
 	unsigned int cm0csratio;	/* offset 0x01C */
-	unsigned int resv1[2];
-	unsigned int cm0dldiff;		/* offset 0x028 */
+	unsigned int resv1[3];
 	unsigned int cm0iclkout;	/* offset 0x02C */
 	unsigned int resv2[8];
 	unsigned int cm1csratio;	/* offset 0x050 */
-	unsigned int resv3[2];
-	unsigned int cm1dldiff;		/* offset 0x05C */
+	unsigned int resv3[3];
 	unsigned int cm1iclkout;	/* offset 0x060 */
 	unsigned int resv4[8];
 	unsigned int cm2csratio;	/* offset 0x084 */
-	unsigned int resv5[2];
-	unsigned int cm2dldiff;		/* offset 0x090 */
+	unsigned int resv5[3];
 	unsigned int cm2iclkout;	/* offset 0x094 */
 	unsigned int resv6[3];
 };
@@ -197,24 +186,21 @@  struct ddr_regs {
 	unsigned int cm0configclk;	/* offset 0x010 */
 	unsigned int resv1[2];
 	unsigned int cm0csratio;	/* offset 0x01C */
-	unsigned int resv2[2];
-	unsigned int cm0dldiff;		/* offset 0x028 */
+	unsigned int resv2[3];
 	unsigned int cm0iclkout;	/* offset 0x02C */
 	unsigned int resv3[4];
 	unsigned int cm1config;		/* offset 0x040 */
 	unsigned int cm1configclk;	/* offset 0x044 */
 	unsigned int resv4[2];
 	unsigned int cm1csratio;	/* offset 0x050 */
-	unsigned int resv5[2];
-	unsigned int cm1dldiff;		/* offset 0x05C */
+	unsigned int resv5[3];
 	unsigned int cm1iclkout;	/* offset 0x060 */
 	unsigned int resv6[4];
 	unsigned int cm2config;		/* offset 0x074 */
 	unsigned int cm2configclk;	/* offset 0x078 */
 	unsigned int resv7[2];
 	unsigned int cm2csratio;	/* offset 0x084 */
-	unsigned int resv8[2];
-	unsigned int cm2dldiff;		/* offset 0x090 */
+	unsigned int resv8[3];
 	unsigned int cm2iclkout;	/* offset 0x094 */
 	unsigned int resv9[12];
 	unsigned int dt0rdsratio0;	/* offset 0x0C8 */
@@ -243,17 +229,14 @@  struct cmd_control {
 	unsigned long cmd0csratio;
 	unsigned long cmd0csforce;
 	unsigned long cmd0csdelay;
-	unsigned long cmd0dldiff;
 	unsigned long cmd0iclkout;
 	unsigned long cmd1csratio;
 	unsigned long cmd1csforce;
 	unsigned long cmd1csdelay;
-	unsigned long cmd1dldiff;
 	unsigned long cmd1iclkout;
 	unsigned long cmd2csratio;
 	unsigned long cmd2csforce;
 	unsigned long cmd2csdelay;
-	unsigned long cmd2dldiff;
 	unsigned long cmd2iclkout;
 };
 
@@ -267,8 +250,6 @@  struct ddr_data {
 	unsigned long datagiratio0;
 	unsigned long datafwsratio0;
 	unsigned long datawrsratio0;
-	unsigned long datauserank0delay;
-	unsigned long datadldiff0;
 };
 
 /**
diff --git a/board/isee/igep0033/board.c b/board/isee/igep0033/board.c
index 0b8356d..6a8ca2b 100644
--- a/board/isee/igep0033/board.c
+++ b/board/isee/igep0033/board.c
@@ -35,20 +35,16 @@  static const struct ddr_data ddr3_data = {
 	.datawdsratio0 = K4B2G1646EBIH9_WR_DQS,
 	.datafwsratio0 = K4B2G1646EBIH9_PHY_FIFO_WE,
 	.datawrsratio0 = K4B2G1646EBIH9_PHY_WR_DATA,
-	.datadldiff0 = PHY_DLL_LOCK_DIFF,
 };
 
 static const struct cmd_control ddr3_cmd_ctrl_data = {
 	.cmd0csratio = K4B2G1646EBIH9_RATIO,
-	.cmd0dldiff = K4B2G1646EBIH9_DLL_LOCK_DIFF,
 	.cmd0iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
 
 	.cmd1csratio = K4B2G1646EBIH9_RATIO,
-	.cmd1dldiff = K4B2G1646EBIH9_DLL_LOCK_DIFF,
 	.cmd1iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
 
 	.cmd2csratio = K4B2G1646EBIH9_RATIO,
-	.cmd2dldiff = K4B2G1646EBIH9_DLL_LOCK_DIFF,
 	.cmd2iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
 };
 
diff --git a/board/phytec/pcm051/board.c b/board/phytec/pcm051/board.c
index dafb1eb..83ee51e 100644
--- a/board/phytec/pcm051/board.c
+++ b/board/phytec/pcm051/board.c
@@ -54,20 +54,16 @@  static const struct ddr_data ddr3_data = {
 	.datawdsratio0 = MT41J256M8HX15E_WR_DQS,
 	.datafwsratio0 = MT41J256M8HX15E_PHY_FIFO_WE,
 	.datawrsratio0 = MT41J256M8HX15E_PHY_WR_DATA,
-	.datadldiff0 = PHY_DLL_LOCK_DIFF,
 };
 
 static const struct cmd_control ddr3_cmd_ctrl_data = {
 	.cmd0csratio = MT41J256M8HX15E_RATIO,
-	.cmd0dldiff = MT41J256M8HX15E_DLL_LOCK_DIFF,
 	.cmd0iclkout = MT41J256M8HX15E_INVERT_CLKOUT,
 
 	.cmd1csratio = MT41J256M8HX15E_RATIO,
-	.cmd1dldiff = MT41J256M8HX15E_DLL_LOCK_DIFF,
 	.cmd1iclkout = MT41J256M8HX15E_INVERT_CLKOUT,
 
 	.cmd2csratio = MT41J256M8HX15E_RATIO,
-	.cmd2dldiff = MT41J256M8HX15E_DLL_LOCK_DIFF,
 	.cmd2iclkout = MT41J256M8HX15E_INVERT_CLKOUT,
 };
 
diff --git a/board/siemens/dxr2/board.c b/board/siemens/dxr2/board.c
index af9d84f..c9b7951 100644
--- a/board/siemens/dxr2/board.c
+++ b/board/siemens/dxr2/board.c
@@ -139,13 +139,9 @@  struct emif_regs dxr2_ddr3_emif_reg_data = {
 };
 
 struct ddr_data dxr2_ddr3_data = {
-	.datadldiff0 = PHY_DLL_LOCK_DIFF,
 };
 
 struct cmd_control dxr2_ddr3_cmd_ctrl_data = {
-	.cmd0dldiff = 0,
-	.cmd1dldiff = 0,
-	.cmd2dldiff = 0,
 };
 	/* pass values from eeprom */
 	dxr2_ddr3_emif_reg_data.sdram_tim1 = settings.ddr3.sdram_tim1;
diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c
index 2c1841f..36b3776 100644
--- a/board/siemens/pxm2/board.c
+++ b/board/siemens/pxm2/board.c
@@ -58,19 +58,14 @@  struct ddr_data pxm2_ddr3_data = {
 	.datawdsratio0 = 0,
 	.datafwsratio0 = 0x8020080,
 	.datawrsratio0 = 0x4010040,
-	.datauserank0delay = 1,
-	.datadldiff0 = PHY_DLL_LOCK_DIFF,
 };
 
 struct cmd_control pxm2_ddr3_cmd_ctrl_data = {
 	.cmd0csratio = 0x80,
-	.cmd0dldiff = 0,
 	.cmd0iclkout = 0,
 	.cmd1csratio = 0x80,
-	.cmd1dldiff = 0,
 	.cmd1iclkout = 0,
 	.cmd2csratio = 0x80,
-	.cmd2dldiff = 0,
 	.cmd2iclkout = 0,
 };
 
diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c
index 5de8fc6..60bad11 100644
--- a/board/siemens/rut/board.c
+++ b/board/siemens/rut/board.c
@@ -63,19 +63,14 @@  struct ddr_data rut_ddr3_data = {
 	.datawdsratio0 = 0x85,
 	.datafwsratio0 = 0x100,
 	.datawrsratio0 = 0xc1,
-	.datauserank0delay = 1,
-	.datadldiff0 = PHY_DLL_LOCK_DIFF,
 };
 
 struct cmd_control rut_ddr3_cmd_ctrl_data = {
 	.cmd0csratio = 0x40,
-	.cmd0dldiff = 0,
 	.cmd0iclkout = 1,
 	.cmd1csratio = 0x40,
-	.cmd1dldiff = 0,
 	.cmd1iclkout = 1,
 	.cmd2csratio = 0x40,
-	.cmd2dldiff = 0,
 	.cmd2iclkout = 1,
 };
 
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 57fedab..1459fae 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -107,21 +107,16 @@  static const struct ddr_data ddr2_data = {
 			  (MT47H128M16RT25E_PHY_WR_DATA<<20) |
 			  (MT47H128M16RT25E_PHY_WR_DATA<<10) |
 			  (MT47H128M16RT25E_PHY_WR_DATA<<0)),
-	.datauserank0delay = MT47H128M16RT25E_PHY_RANK0_DELAY,
-	.datadldiff0 = PHY_DLL_LOCK_DIFF,
 };
 
 static const struct cmd_control ddr2_cmd_ctrl_data = {
 	.cmd0csratio = MT47H128M16RT25E_RATIO,
-	.cmd0dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF,
 	.cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
 
 	.cmd1csratio = MT47H128M16RT25E_RATIO,
-	.cmd1dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF,
 	.cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
 
 	.cmd2csratio = MT47H128M16RT25E_RATIO,
-	.cmd2dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF,
 	.cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
 };
 
@@ -139,7 +134,6 @@  static const struct ddr_data ddr3_data = {
 	.datawdsratio0 = MT41J128MJT125_WR_DQS,
 	.datafwsratio0 = MT41J128MJT125_PHY_FIFO_WE,
 	.datawrsratio0 = MT41J128MJT125_PHY_WR_DATA,
-	.datadldiff0 = PHY_DLL_LOCK_DIFF,
 };
 
 static const struct ddr_data ddr3_beagleblack_data = {
@@ -147,7 +141,6 @@  static const struct ddr_data ddr3_beagleblack_data = {
 	.datawdsratio0 = MT41K256M16HA125E_WR_DQS,
 	.datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
 	.datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
-	.datadldiff0 = PHY_DLL_LOCK_DIFF,
 };
 
 static const struct ddr_data ddr3_evm_data = {
@@ -155,48 +148,38 @@  static const struct ddr_data ddr3_evm_data = {
 	.datawdsratio0 = MT41J512M8RH125_WR_DQS,
 	.datafwsratio0 = MT41J512M8RH125_PHY_FIFO_WE,
 	.datawrsratio0 = MT41J512M8RH125_PHY_WR_DATA,
-	.datadldiff0 = PHY_DLL_LOCK_DIFF,
 };
 
 static const struct cmd_control ddr3_cmd_ctrl_data = {
 	.cmd0csratio = MT41J128MJT125_RATIO,
-	.cmd0dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
 	.cmd0iclkout = MT41J128MJT125_INVERT_CLKOUT,
 
 	.cmd1csratio = MT41J128MJT125_RATIO,
-	.cmd1dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
 	.cmd1iclkout = MT41J128MJT125_INVERT_CLKOUT,
 
 	.cmd2csratio = MT41J128MJT125_RATIO,
-	.cmd2dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
 	.cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT,
 };
 
 static const struct cmd_control ddr3_beagleblack_cmd_ctrl_data = {
 	.cmd0csratio = MT41K256M16HA125E_RATIO,
-	.cmd0dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF,
 	.cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
 
 	.cmd1csratio = MT41K256M16HA125E_RATIO,
-	.cmd1dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF,
 	.cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
 
 	.cmd2csratio = MT41K256M16HA125E_RATIO,
-	.cmd2dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF,
 	.cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
 };
 
 static const struct cmd_control ddr3_evm_cmd_ctrl_data = {
 	.cmd0csratio = MT41J512M8RH125_RATIO,
-	.cmd0dldiff = MT41J512M8RH125_DLL_LOCK_DIFF,
 	.cmd0iclkout = MT41J512M8RH125_INVERT_CLKOUT,
 
 	.cmd1csratio = MT41J512M8RH125_RATIO,
-	.cmd1dldiff = MT41J512M8RH125_DLL_LOCK_DIFF,
 	.cmd1iclkout = MT41J512M8RH125_INVERT_CLKOUT,
 
 	.cmd2csratio = MT41J512M8RH125_RATIO,
-	.cmd2dldiff = MT41J512M8RH125_DLL_LOCK_DIFF,
 	.cmd2iclkout = MT41J512M8RH125_INVERT_CLKOUT,
 };
 
diff --git a/board/ti/ti814x/evm.c b/board/ti/ti814x/evm.c
index e406326..0b76a77 100644
--- a/board/ti/ti814x/evm.c
+++ b/board/ti/ti814x/evm.c
@@ -33,15 +33,12 @@  static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
 #ifdef CONFIG_SPL_BUILD
 static const struct cmd_control evm_ddr2_cctrl_data = {
 	.cmd0csratio	= 0x80,
-	.cmd0dldiff	= 0x04,
 	.cmd0iclkout	= 0x00,
 
 	.cmd1csratio	= 0x80,
-	.cmd1dldiff	= 0x04,
 	.cmd1iclkout	= 0x00,
 
 	.cmd2csratio	= 0x80,
-	.cmd2dldiff	= 0x04,
 	.cmd2iclkout	= 0x00,
 };
 
@@ -77,8 +74,6 @@  static const struct ddr_data evm_ddr2_data = {
 	.datagiratio0		= ((0<<10) | (0<<0)),
 	.datafwsratio0		= ((0x90<<10) | (0x90<<0)),
 	.datawrsratio0		= ((0x50<<10) | (0x50<<0)),
-	.datauserank0delay	= 1,
-	.datadldiff0		= 0x4,
 };
 
 void set_uart_mux_conf(void)
diff --git a/board/ti/ti816x/evm.c b/board/ti/ti816x/evm.c
index 74d35e9..a53859e 100644
--- a/board/ti/ti816x/evm.c
+++ b/board/ti/ti816x/evm.c
@@ -59,21 +59,16 @@  static struct ddr_data ddr2_data = {
 	.datagiratio0		= ((0x0<<10) | (0x0<<0)),
 	.datafwsratio0		= ((0x13A<<10) | (0x13A<<0)),
 	.datawrsratio0		= ((0x8A<<10) | (0x8A<<0)),
-	.datauserank0delay	= 0x1,
-	.datadldiff0		= 0x0, /* depend on cpu rev, set later */
 };
 
 static struct cmd_control ddr2_ctrl = {
 	.cmd0csratio	= 0x80,
-	.cmd0dldiff	= 0x04, /* reset value is 0x4 */
 	.cmd0iclkout	= 0x00,
 
 	.cmd1csratio	= 0x80,
-	.cmd1dldiff	= 0x04, /* reset value is 0x4 */
 	.cmd1iclkout	= 0x00,
 
 	.cmd2csratio	= 0x80,
-	.cmd2dldiff	= 0x04, /* reset value is 0x4 */
 	.cmd2iclkout	= 0x00,
 
 };
@@ -150,21 +145,16 @@  static struct ddr_data ddr3_data = {
 	.datagiratio0		= ((0x20<<10) | 0x20<<0),
 	.datafwsratio0		= ((RD_DQS_GATE<<10) | (RD_DQS_GATE<<0)),
 	.datawrsratio0		= (((WR_DQS+0x40)<<10) | ((WR_DQS+0x40)<<0)),
-	.datauserank0delay	= 0x1,
-	.datadldiff0		= 0x0, /* depend on cpu rev, set later */
 };
 
 static const struct cmd_control ddr3_ctrl = {
 	.cmd0csratio	= 0x100,
-	.cmd0dldiff	= 0x004, /* reset value is 0x4 */
 	.cmd0iclkout	= 0x001,
 
 	.cmd1csratio	= 0x100,
-	.cmd1dldiff	= 0x004, /* reset value is 0x4 */
 	.cmd1iclkout	= 0x001,
 
 	.cmd2csratio	= 0x100,
-	.cmd2dldiff	= 0x004, /* reset value is 0x4 */
 	.cmd2iclkout	= 0x001,
 };
 
@@ -198,11 +188,6 @@  void sdram_init(void)
 	config_dmm(&evm_lisa_map_regs);
 
 #ifdef CONFIG_TI816X_EVM_DDR2
-	ddr2_data.datadldiff0 = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
-	ddr2_ctrl.cmd0dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
-	ddr2_ctrl.cmd1dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
-	ddr2_ctrl.cmd2dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
-
 	if (CONFIG_TI816X_USE_EMIF0) {
 		ddr2_emif0_regs.emif_ddr_phy_ctlr_1 =
 			(get_cpu_rev() == 0x1 ? 0x0000010B : 0x0000030B);
@@ -217,8 +202,6 @@  void sdram_init(void)
 #endif
 
 #ifdef CONFIG_TI816X_EVM_DDR3
-	ddr3_data.datadldiff0 = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
-
 	if (CONFIG_TI816X_USE_EMIF0)
 		config_ddr(0, 0, &ddr3_data, &ddr3_ctrl, &ddr3_emif0_regs, 0);