| Message ID | 1383550528-3844-1-git-send-email-sr@denx.de |
|---|---|
| State | Accepted |
| Delegated to: | Stefano Babic |
| Headers | show |
>>>>> "Stefan" == Stefan Roese <sr@denx.de> writes: Stefan> Since the titanium board is not a Freescale board, move its Stefan> BSP code from the freescale board directory to the newly created Stefan> barco board directory. Stefan> Signed-off-by: Stefan Roese <sr@denx.de> Stefan> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Stefan> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> Stefan> --- Stefan> board/{freescale => barco}/titanium/Makefile | 0 Stefan> board/{freescale => barco}/titanium/imximage.cfg | 0 Stefan> board/{freescale => barco}/titanium/titanium.c | 0 Stefan> boards.cfg | 2 +- Stefan> 4 files changed, 1 insertion(+), 1 deletion(-) Stefan> rename board/{freescale => barco}/titanium/Makefile (100%) Stefan> rename board/{freescale => barco}/titanium/imximage.cfg (100%) Stefan> rename board/{freescale => barco}/titanium/titanium.c (100%) Stefan> diff --git a/board/freescale/titanium/Makefile b/board/barco/titanium/Makefile Stefan> similarity index 100% Stefan> rename from board/freescale/titanium/Makefile Stefan> rename to board/barco/titanium/Makefile Stefan> diff --git a/board/freescale/titanium/imximage.cfg b/board/barco/titanium/imximage.cfg Stefan> similarity index 100% Stefan> rename from board/freescale/titanium/imximage.cfg Stefan> rename to board/barco/titanium/imximage.cfg Stefan> diff --git a/board/freescale/titanium/titanium.c b/board/barco/titanium/titanium.c Stefan> similarity index 100% Stefan> rename from board/freescale/titanium/titanium.c Stefan> rename to board/barco/titanium/titanium.c Stefan> diff --git a/boards.cfg b/boards.cfg Stefan> index 5e10125..afe398d 100644 Stefan> --- a/boards.cfg Stefan> +++ b/boards.cfg Stefan> @@ -304,7 +304,7 @@ Active arm armv7 mx6 freescale mx6qsabreauto Stefan> Active arm armv7 mx6 freescale mx6sabresd mx6dlsabresd mx6sabresd:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL Fabio Estevam <fabio.estevam@freescale.com> Stefan> Active arm armv7 mx6 freescale mx6sabresd mx6qsabresd mx6sabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q Fabio Estevam <fabio.estevam@freescale.com> Stefan> Active arm armv7 mx6 freescale mx6slevk mx6slevk mx6slevk:IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL Fabio Estevam <fabio.estevam@freescale.com> Stefan> -Active arm armv7 mx6 freescale titanium titanium titanium:IMX_CONFIG=board/freescale/titanium/imximage.cfg Stefan Roese <sr@denx.de> Stefan> +Active arm armv7 mx6 barco titanium titanium titanium:IMX_CONFIG=board/barco/titanium/imximage.cfg Stefan Roese <sr@denx.de> Stefan> Active arm armv7 omap3 - overo omap3_overo - Steve Sakoman <sakoman@gmail.com> Stefan> Active arm armv7 omap3 - pandora omap3_pandora - Grazvydas Ignotas <notasas@gmail.com> Stefan> Active arm armv7 omap3 8dtech eco5pk eco5pk - Raphael Assenat <raph@8d.com> Stefan> -- Stefan> 1.8.4.2 -- Sorry about disclaimer - It's out of my control. Bye, Peter Korsgaard This message is subject to the following terms and conditions: MAIL DISCLAIMER<http://www.barco.com/en/maildisclaimer>
On 04/11/2013 08:35, Stefan Roese wrote: > Since the titanium board is not a Freescale board, move its > BSP code from the freescale board directory to the newly created > barco board directory. > > Signed-off-by: Stefan Roese <sr@denx.de> > Cc: Peter Korsgaard <peter.korsgaard@barco.com> > Cc: Stefano Babic <sbabic@denx.de> > --- Applied to u-boot-imx, thanks. Best regards, Stefano Babic
diff --git a/board/freescale/titanium/Makefile b/board/barco/titanium/Makefile similarity index 100% rename from board/freescale/titanium/Makefile rename to board/barco/titanium/Makefile diff --git a/board/freescale/titanium/imximage.cfg b/board/barco/titanium/imximage.cfg similarity index 100% rename from board/freescale/titanium/imximage.cfg rename to board/barco/titanium/imximage.cfg diff --git a/board/freescale/titanium/titanium.c b/board/barco/titanium/titanium.c similarity index 100% rename from board/freescale/titanium/titanium.c rename to board/barco/titanium/titanium.c diff --git a/boards.cfg b/boards.cfg index 5e10125..afe398d 100644 --- a/boards.cfg +++ b/boards.cfg @@ -304,7 +304,7 @@ Active arm armv7 mx6 freescale mx6qsabreauto Active arm armv7 mx6 freescale mx6sabresd mx6dlsabresd mx6sabresd:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL Fabio Estevam <fabio.estevam@freescale.com> Active arm armv7 mx6 freescale mx6sabresd mx6qsabresd mx6sabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q Fabio Estevam <fabio.estevam@freescale.com> Active arm armv7 mx6 freescale mx6slevk mx6slevk mx6slevk:IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL Fabio Estevam <fabio.estevam@freescale.com> -Active arm armv7 mx6 freescale titanium titanium titanium:IMX_CONFIG=board/freescale/titanium/imximage.cfg Stefan Roese <sr@denx.de> +Active arm armv7 mx6 barco titanium titanium titanium:IMX_CONFIG=board/barco/titanium/imximage.cfg Stefan Roese <sr@denx.de> Active arm armv7 omap3 - overo omap3_overo - Steve Sakoman <sakoman@gmail.com> Active arm armv7 omap3 - pandora omap3_pandora - Grazvydas Ignotas <notasas@gmail.com> Active arm armv7 omap3 8dtech eco5pk eco5pk - Raphael Assenat <raph@8d.com>
Since the titanium board is not a Freescale board, move its BSP code from the freescale board directory to the newly created barco board directory. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Stefano Babic <sbabic@denx.de> --- board/{freescale => barco}/titanium/Makefile | 0 board/{freescale => barco}/titanium/imximage.cfg | 0 board/{freescale => barco}/titanium/titanium.c | 0 boards.cfg | 2 +- 4 files changed, 1 insertion(+), 1 deletion(-) rename board/{freescale => barco}/titanium/Makefile (100%) rename board/{freescale => barco}/titanium/imximage.cfg (100%) rename board/{freescale => barco}/titanium/titanium.c (100%)