Message ID | 20090408211521.D0EF411B8054@mail214-sin.bigfish.com (mailing list archive) |
---|---|
State | Superseded, archived |
Headers | show |
Hi John, On Wed, 8 Apr 2009 15:11:25 -0600 John Linn <john.linn@xilinx.com> wrote: > > * 2002-2007 (c) MontaVista Software, Inc. > * 2007 (c) Secret Lab Technologies, Ltd. > + * 2009 (c) Xilinx Inc. > * > - * This file is licensed under the terms of the GNU General Public License > - * version 2. This program is licensed "as is" without any warranty of any > - * kind, whether express or implied. > + * This program is free software; you can redistribute it > + * and/or modify it under the terms of the GNU General Public > + * License as published by the Free Software Foundation; > + * either version 2 of the License, or (at your option) any > + * later version. > + * > + * You should have received a copy of the GNU General Public > + * License along with this program; if not, write to the Free > + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA > + * 02139, USA. This changes the license for this file (from "GPLv2" to "GPLv2 or later"). Have you asked the other copyright owners about that?
On Wed, Apr 08, 2009 at 03:11:25PM -0600, John Linn wrote: >From: Suneel <[mailto:suneel.garapati@xilinx.com]> > >Added support for the new xps tft controller. > >The new core has PLB interface support in addition to existing >DCR interface. > >The driver has been modified to support this new core which >can be connected on PLB or DCR bus. > >Signed-off-by: Suneel <suneelg@xilinx.com> >Signed-off-by: John Linn <john.linn@xilinx.com> >--- > drivers/video/xilinxfb.c | 227 ++++++++++++++++++++++++++++++++-------------- > 1 files changed, 160 insertions(+), 67 deletions(-) > >diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c >index a82c530..a28a834 100644 >--- a/drivers/video/xilinxfb.c >+++ b/drivers/video/xilinxfb.c >@@ -1,17 +1,24 @@ > /* >- * xilinxfb.c > * >- * Xilinx TFT LCD frame buffer driver >+ * Xilinx TFT frame buffer driver > * > * Author: MontaVista Software, Inc. > * source@mvista.com > * > * 2002-2007 (c) MontaVista Software, Inc. > * 2007 (c) Secret Lab Technologies, Ltd. >+ * 2009 (c) Xilinx Inc. > * >- * This file is licensed under the terms of the GNU General Public License >- * version 2. This program is licensed "as is" without any warranty of any >- * kind, whether express or implied. >+ * This program is free software; you can redistribute it >+ * and/or modify it under the terms of the GNU General Public >+ * License as published by the Free Software Foundation; >+ * either version 2 of the License, or (at your option) any >+ * later version. >+ * >+ * You should have received a copy of the GNU General Public >+ * License along with this program; if not, write to the Free >+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA >+ * 02139, USA. > */ What Stephen said. > #define NUM_REGS 2 > #define REG_FB_ADDR 0 >@@ -112,6 +123,11 @@ struct xilinxfb_drvdata { > > struct fb_info info; /* FB driver info record */ > >+ u32 regs_phys; /* phys. address of the control >+ registers */ Is this driver usable on the 440 based Xilinx devices? If so, is it possible to have the physical address of the registers above 4GiB, so is common with almost all the I/O on the other 440 boards? >+ void __iomem *regs; /* virt. address of the control >+ registers */ >+ > dcr_host_t dcr_host; > unsigned int dcr_start; > unsigned int dcr_len; >@@ -120,6 +136,10 @@ struct xilinxfb_drvdata { > dma_addr_t fb_phys; /* phys. address of the frame buffer */ > int fb_alloced; /* Flag, was the fb memory alloced? */ > >+ u32 dcr_splb_slave_if; >+ /* True, if control interface is >+ connected through plb */ >+ Do you need a full 32-bit variable for a simple boolean? It might be best for structure alignment, but you might want to look at using a flags variable or something that could be extended with feature bits in a single word. > u32 reg_ctrl_default; > > u32 pseudo_palette[PALETTE_ENTRIES_NO]; >@@ -130,14 +150,19 @@ struct xilinxfb_drvdata { > container_of(_info, struct xilinxfb_drvdata, info) > > /* >- * The LCD controller has DCR interface to its registers, but all >- * the boards and configurations the driver has been tested with >- * use opb2dcr bridge. So the registers are seen as memory mapped. >- * This macro is to make it simple to add the direct DCR access >- * when it's needed. >+ * The XPS TFT Controller can be accessed through PLB or DCR interface. >+ * To perform the read/write on the registers we need to check on >+ * which bus its connected and call the appropriate write API. > */ >-#define xilinx_fb_out_be32(driverdata, offset, val) \ >- dcr_write(driverdata->dcr_host, offset, val) >+static void xilinx_fb_out_be32(struct xilinxfb_drvdata *drvdata, u32 offset, >+ u32 val) >+{ >+ if (drvdata->dcr_splb_slave_if == 1) >+ out_be32(drvdata->regs + (offset << 2), val); >+ else >+ dcr_write(drvdata->dcr_host, offset, val); >+ >+} > > static int > xilinx_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, >@@ -175,7 +200,8 @@ xilinx_fb_blank(int blank_mode, struct fb_info *fbi) > switch (blank_mode) { > case FB_BLANK_UNBLANK: > /* turn on panel */ >- xilinx_fb_out_be32(drvdata, REG_CTRL, drvdata->reg_ctrl_default); >+ xilinx_fb_out_be32(drvdata, REG_CTRL, >+ drvdata->reg_ctrl_default); > break; > > case FB_BLANK_NORMAL: >@@ -191,8 +217,7 @@ xilinx_fb_blank(int blank_mode, struct fb_info *fbi) > return 0; /* success */ > } > >-static struct fb_ops xilinxfb_ops = >-{ >+static struct fb_ops xilinxfb_ops = { > .owner = THIS_MODULE, > .fb_setcolreg = xilinx_fb_setcolreg, > .fb_blank = xilinx_fb_blank, >@@ -205,25 +230,35 @@ static struct fb_ops xilinxfb_ops = > * Bus independent setup/teardown > */ > >-static int xilinxfb_assign(struct device *dev, dcr_host_t dcr_host, >- unsigned int dcr_start, unsigned int dcr_len, >+static int xilinxfb_assign(struct device *dev, >+ struct xilinxfb_drvdata *drvdata, >+ unsigned long physaddr, > struct xilinxfb_platform_data *pdata) > { >- struct xilinxfb_drvdata *drvdata; > int rc; > int fbsize = pdata->xvirt * pdata->yvirt * BYTES_PER_PIXEL; > >- /* Allocate the driver data region */ >- drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL); >- if (!drvdata) { >- dev_err(dev, "Couldn't allocate device private record\n"); >- return -ENOMEM; >+ if (drvdata->dcr_splb_slave_if) { >+ /* >+ * Map the control registers in if the controller >+ * is on direct PLB interface. >+ */ >+ if (!request_mem_region(physaddr, 8, DRIVER_NAME)) { >+ dev_err(dev, "Couldn't lock memory region at 0x%08lX\n", >+ physaddr); >+ rc = -ENODEV; >+ goto err_region; >+ } >+ >+ drvdata->regs_phys = physaddr; >+ drvdata->regs = ioremap(physaddr, 8); >+ if (!drvdata->regs) { >+ dev_err(dev, "Couldn't lock memory region at 0x%08lX\n", >+ physaddr); >+ rc = -ENODEV; >+ goto err_map; >+ } > } >- dev_set_drvdata(dev, drvdata); >- >- drvdata->dcr_start = dcr_start; >- drvdata->dcr_len = dcr_len; >- drvdata->dcr_host = dcr_host; > > /* Allocate the framebuffer memory */ > if (pdata->fb_phys) { >@@ -238,7 +273,10 @@ static int xilinxfb_assign(struct device *dev, dcr_host_t dcr_host, > if (!drvdata->fb_virt) { > dev_err(dev, "Could not allocate frame buffer memory\n"); > rc = -ENOMEM; >- goto err_region; >+ if (drvdata->dcr_splb_slave_if) >+ goto err_fbmem; >+ else >+ goto err_region; > } > > /* Clear (turn to black) the framebuffer */ >@@ -251,7 +289,8 @@ static int xilinxfb_assign(struct device *dev, dcr_host_t dcr_host, > drvdata->reg_ctrl_default = REG_CTRL_ENABLE; > if (pdata->rotate_screen) > drvdata->reg_ctrl_default |= REG_CTRL_ROTATE; >- xilinx_fb_out_be32(drvdata, REG_CTRL, drvdata->reg_ctrl_default); >+ xilinx_fb_out_be32(drvdata, REG_CTRL, >+ drvdata->reg_ctrl_default); > > /* Fill struct fb_info */ > drvdata->info.device = dev; >@@ -287,9 +326,14 @@ static int xilinxfb_assign(struct device *dev, dcr_host_t dcr_host, > goto err_regfb; > } > >+ if (drvdata->dcr_splb_slave_if) { >+ /* Put a banner in the log (for DEBUG) */ >+ dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr, >+ drvdata->regs); >+ } > /* Put a banner in the log (for DEBUG) */ > dev_dbg(dev, "fb: phys=%p, virt=%p, size=%x\n", >- (void*)drvdata->fb_phys, drvdata->fb_virt, fbsize); >+ (void *)drvdata->fb_phys, drvdata->fb_virt, fbsize); > > return 0; /* success */ > >@@ -300,9 +344,20 @@ err_cmap: > if (drvdata->fb_alloced) > dma_free_coherent(dev, PAGE_ALIGN(fbsize), drvdata->fb_virt, > drvdata->fb_phys); >+ else >+ iounmap(drvdata->fb_virt); >+ > /* Turn off the display */ > xilinx_fb_out_be32(drvdata, REG_CTRL, 0); > >+err_fbmem: >+ if (drvdata->dcr_splb_slave_if) >+ iounmap(drvdata->regs); >+ >+err_map: >+ if (drvdata->dcr_splb_slave_if) >+ release_mem_region(physaddr, 8); >+ > err_region: > kfree(drvdata); > dev_set_drvdata(dev, NULL); >@@ -325,11 +380,18 @@ static int xilinxfb_release(struct device *dev) > if (drvdata->fb_alloced) > dma_free_coherent(dev, PAGE_ALIGN(drvdata->info.fix.smem_len), > drvdata->fb_virt, drvdata->fb_phys); >+ else >+ iounmap(drvdata->fb_virt); > > /* Turn off the display */ > xilinx_fb_out_be32(drvdata, REG_CTRL, 0); > >- dcr_unmap(drvdata->dcr_host, drvdata->dcr_len); >+ /* Release the resources, as allocated based on interface */ >+ if (drvdata->dcr_splb_slave_if) { >+ iounmap(drvdata->regs); >+ release_mem_region(drvdata->regs_phys, 8); >+ } else >+ dcr_unmap(drvdata->dcr_host, drvdata->dcr_len); > > kfree(drvdata); > dev_set_drvdata(dev, NULL); >@@ -341,27 +403,54 @@ static int xilinxfb_release(struct device *dev) > * OF bus binding > */ > >-#if defined(CONFIG_OF) > static int __devinit > xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match) > { > const u32 *prop; >+ u32 *p; >+ u32 tft_access; > struct xilinxfb_platform_data pdata; >+ struct resource res; > int size, rc; >- int start, len; >+ int start = 0, len = 0; > dcr_host_t dcr_host; >+ struct xilinxfb_drvdata *drvdata; > > /* Copy with the default pdata (not a ptr reference!) */ > pdata = xilinx_fb_default_pdata; > > dev_dbg(&op->dev, "xilinxfb_of_probe(%p, %p)\n", op, match); > >- start = dcr_resource_start(op->node, 0); >- len = dcr_resource_len(op->node, 0); >- dcr_host = dcr_map(op->node, start, len); >- if (!DCR_MAP_OK(dcr_host)) { >- dev_err(&op->dev, "invalid address\n"); >- return -ENODEV; >+ /* >+ * To check whether the core is connected directly to DCR or PLB >+ * interface and initialize the tft_access accordingly. >+ */ >+ p = (u32 *)of_get_property(op->node, "xlnx,dcr-splb-slave-if", NULL); >+ >+ if (p) >+ tft_access = *p; >+ else >+ tft_access = 0; /* For backward compatibility */ >+ >+ /* >+ * Fill the resource structure if its direct PLB interface >+ * otherwise fill the dcr_host structure. >+ */ >+ if (tft_access) { >+ rc = of_address_to_resource(op->node, 0, &res); >+ if (rc) { >+ dev_err(&op->dev, "invalid address\n"); >+ return -ENODEV; >+ } >+ >+ } else { >+ start = dcr_resource_start(op->node, 0); >+ len = dcr_resource_len(op->node, 0); >+ dcr_host = dcr_map(op->node, start, len); >+ if (!DCR_MAP_OK(dcr_host)) { >+ dev_err(&op->dev, "invalid address\n"); >+ return -ENODEV; >+ } > } > > prop = of_get_property(op->node, "phys-size", &size); >@@ -385,7 +474,26 @@ xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match) > if (of_find_property(op->node, "rotate-display", NULL)) > pdata.rotate_screen = 1; > >- return xilinxfb_assign(&op->dev, dcr_host, start, len, &pdata); >+ /* Allocate the driver data region */ >+ drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL); >+ if (!drvdata) { >+ dev_err(&op->dev, "Couldn't allocate device private record\n"); >+ return -ENOMEM; >+ } >+ dev_set_drvdata(&op->dev, drvdata); >+ >+ /* Store the tft_access value into the driverdata structure member */ >+ drvdata->dcr_splb_slave_if = tft_access; >+ >+ /* Arguments are passed based on the interface */ >+ if (drvdata->dcr_splb_slave_if == 1) { >+ return xilinxfb_assign(&op->dev, drvdata, res.start, &pdata); >+ } else { >+ drvdata->dcr_start = start; >+ drvdata->dcr_len = len; >+ drvdata->dcr_host = dcr_host; >+ return xilinxfb_assign(&op->dev, drvdata, 0, &pdata); >+ } > } > > static int __devexit xilinxfb_of_remove(struct of_device *op) >@@ -395,6 +503,7 @@ static int __devexit xilinxfb_of_remove(struct of_device *op) > > /* Match table for of_platform binding */ > static struct of_device_id xilinxfb_of_match[] __devinitdata = { >+ { .compatible = "xlnx,xps-tft-1.00.a", }, > { .compatible = "xlnx,plb-tft-cntlr-ref-1.00.a", }, > { .compatible = "xlnx,plb-dvi-cntlr-ref-1.00.c", }, > {}, >@@ -412,22 +521,6 @@ static struct of_platform_driver xilinxfb_of_driver = { > }, > }; > >-/* Registration helpers to keep the number of #ifdefs to a minimum */ >-static inline int __init xilinxfb_of_register(void) >-{ >- pr_debug("xilinxfb: calling of_register_platform_driver()\n"); >- return of_register_platform_driver(&xilinxfb_of_driver); >-} >- >-static inline void __exit xilinxfb_of_unregister(void) >-{ >- of_unregister_platform_driver(&xilinxfb_of_driver); >-} >-#else /* CONFIG_OF */ >-/* CONFIG_OF not enabled; do nothing helpers */ >-static inline int __init xilinxfb_of_register(void) { return 0; } >-static inline void __exit xilinxfb_of_unregister(void) { } >-#endif /* CONFIG_OF */ > > /* --------------------------------------------------------------------- > * Module setup and teardown >@@ -436,18 +529,18 @@ static inline void __exit xilinxfb_of_unregister(void) { } > static int __init > xilinxfb_init(void) > { >- return xilinxfb_of_register(); >+ return of_register_platform_driver(&xilinxfb_of_driver); > } > > static void __exit > xilinxfb_cleanup(void) > { >- xilinxfb_of_unregister(); >+ of_unregister_platform_driver(&xilinxfb_of_driver); > } > > module_init(xilinxfb_init); > module_exit(xilinxfb_cleanup); > >-MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>"); >-MODULE_DESCRIPTION(DRIVER_DESCRIPTION); >+MODULE_AUTHOR("Xilinx Inc."); >+MODULE_DESCRIPTION("Xilinx TFT frame buffer driver"); > MODULE_LICENSE("GPL"); You changed the MODULE_AUTHOR here. Is that really valid? >-- >1.6.2.1 > > >This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately. > This seems rather odd to be on a patch submission.... josh
On Thu, Apr 9, 2009 at 2:46 PM, Josh Boyer <jwboyer@linux.vnet.ibm.com>wrote: > On Wed, Apr 08, 2009 at 03:11:25PM -0600, John Linn wrote: > >From: Suneel <[mailto:suneel.garapati@xilinx.com]> > > > >Added support for the new xps tft controller. > > > >The new core has PLB interface support in addition to existing > >DCR interface. > > > >The driver has been modified to support this new core which > >can be connected on PLB or DCR bus. > > > >Signed-off-by: Suneel <suneelg@xilinx.com> > >Signed-off-by: John Linn <john.linn@xilinx.com> > >--- > > drivers/video/xilinxfb.c | 227 > ++++++++++++++++++++++++++++++++-------------- > > 1 files changed, 160 insertions(+), 67 deletions(-) > > > >diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c > >index a82c530..a28a834 100644 > >--- a/drivers/video/xilinxfb.c > >+++ b/drivers/video/xilinxfb.c > >@@ -1,17 +1,24 @@ > > /* > >- * xilinxfb.c > > * > >- * Xilinx TFT LCD frame buffer driver > >+ * Xilinx TFT frame buffer driver > > * > > * Author: MontaVista Software, Inc. > > * source@mvista.com > > * > > * 2002-2007 (c) MontaVista Software, Inc. > > * 2007 (c) Secret Lab Technologies, Ltd. > >+ * 2009 (c) Xilinx Inc. > > * > >- * This file is licensed under the terms of the GNU General Public > License > >- * version 2. This program is licensed "as is" without any warranty of > any > >- * kind, whether express or implied. > >+ * This program is free software; you can redistribute it > >+ * and/or modify it under the terms of the GNU General Public > >+ * License as published by the Free Software Foundation; > >+ * either version 2 of the License, or (at your option) any > >+ * later version. > >+ * > >+ * You should have received a copy of the GNU General Public > >+ * License along with this program; if not, write to the Free > >+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA > >+ * 02139, USA. > > */ > > What Stephen said. > > > #define NUM_REGS 2 > > #define REG_FB_ADDR 0 > >@@ -112,6 +123,11 @@ struct xilinxfb_drvdata { > > > > struct fb_info info; /* FB driver info record */ > > > >+ u32 regs_phys; /* phys. address of the control > >+ registers */ > > Is this driver usable on the 440 based Xilinx devices? If so, is it > possible > to have the physical address of the registers above 4GiB, so is common with > almost all the I/O on the other 440 boards? > > The driver works fine on 440 based Xilinx boards (the ML510 I use has a 440 core). It might be nice to move physical addresses above 4GB for devices but in all Xilinx tools and reference designs addresses below 4GB are used for periperhals and I think even below 2GB (or even below 1GB). It depends on the design. Roderick Colenbrander
> -----Original Message----- > From: Stephen Rothwell [mailto:sfr@canb.auug.org.au] > Sent: Wednesday, April 08, 2009 7:52 PM > To: John Linn > Cc: grant.likely@secretlab.ca; jwboyer@linux.vnet.ibm.com; > linuxppc-dev@ozlabs.org; > linux-fbdev-devel@lists.sourceforge.net; > akonovalov@ru.mvista.com; adaplas@gmail.com; Suneel Garapati; Suneel > Subject: Re: [PATCH] Xilinx : Framebuffer Driver: Add PLB > support (non-DCR) > > Hi John, > > On Wed, 8 Apr 2009 15:11:25 -0600 John Linn > <john.linn@xilinx.com> wrote: > > > > * 2002-2007 (c) MontaVista Software, Inc. > > * 2007 (c) Secret Lab Technologies, Ltd. > > + * 2009 (c) Xilinx Inc. > > * > > - * This file is licensed under the terms of the GNU > General Public License > > - * version 2. This program is licensed "as is" without > any warranty of any > > - * kind, whether express or implied. > > + * This program is free software; you can redistribute it > > + * and/or modify it under the terms of the GNU General Public > > + * License as published by the Free Software Foundation; > > + * either version 2 of the License, or (at your option) any > > + * later version. > > + * > > + * You should have received a copy of the GNU General Public > > + * License along with this program; if not, write to the Free > > + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA > > + * 02139, USA. > > This changes the license for this file (from "GPLv2" to "GPLv2 or > later"). Have you asked the other copyright owners about that? Andrei was copied on the patch, we'll see if he has any thoughts about it. Thanks, John > > -- > Cheers, > Stephen Rothwell sfr@canb.auug.org.au > http://www.canb.auug.org.au/~sfr/ > This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
On Thu, Apr 9, 2009 at 7:16 AM, John Linn <John.Linn@xilinx.com> wrote: >> -----Original Message----- >> From: Stephen Rothwell [mailto:sfr@canb.auug.org.au] >> Sent: Wednesday, April 08, 2009 7:52 PM >> To: John Linn >> Cc: grant.likely@secretlab.ca; jwboyer@linux.vnet.ibm.com; >> linuxppc-dev@ozlabs.org; >> linux-fbdev-devel@lists.sourceforge.net; >> akonovalov@ru.mvista.com; adaplas@gmail.com; Suneel Garapati; Suneel >> Subject: Re: [PATCH] Xilinx : Framebuffer Driver: Add PLB >> support (non-DCR) >> >> Hi John, >> >> On Wed, 8 Apr 2009 15:11:25 -0600 John Linn >> <john.linn@xilinx.com> wrote: >> > >> > * 2002-2007 (c) MontaVista Software, Inc. >> > * 2007 (c) Secret Lab Technologies, Ltd. >> > + * 2009 (c) Xilinx Inc. >> > * >> > - * This file is licensed under the terms of the GNU >> General Public License >> > - * version 2. This program is licensed "as is" without >> any warranty of any >> > - * kind, whether express or implied. >> > + * This program is free software; you can redistribute it >> > + * and/or modify it under the terms of the GNU General Public >> > + * License as published by the Free Software Foundation; >> > + * either version 2 of the License, or (at your option) any >> > + * later version. >> > + * >> > + * You should have received a copy of the GNU General Public >> > + * License along with this program; if not, write to the Free >> > + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA >> > + * 02139, USA. >> >> This changes the license for this file (from "GPLv2" to "GPLv2 or >> later"). Have you asked the other copyright owners about that? > > Andrei was copied on the patch, we'll see if he has any thoughts about > it. I also hold copyright on this file and I want the license to stay GPLv2. g.
On Thu, Apr 09, 2009 at 04:06:56PM +0200, Roderick Colenbrander wrote: >On Thu, Apr 9, 2009 at 2:46 PM, Josh Boyer <jwboyer@linux.vnet.ibm.com>wrote: >> > #define NUM_REGS 2 >> > #define REG_FB_ADDR 0 >> >@@ -112,6 +123,11 @@ struct xilinxfb_drvdata { >> > >> > struct fb_info info; /* FB driver info record */ >> > >> >+ u32 regs_phys; /* phys. address of the control >> >+ registers */ >> >> Is this driver usable on the 440 based Xilinx devices? If so, is it >> possible >> to have the physical address of the registers above 4GiB, so is common with >> almost all the I/O on the other 440 boards? >> >> >The driver works fine on 440 based Xilinx boards (the ML510 I use has a 440 >core). It might be nice to move physical addresses above 4GB for devices but >in all Xilinx tools and reference designs addresses below 4GB are used for >periperhals and I think even below 2GB (or even below 1GB). It depends on >the design. Right. The "depends on the design" part is what I'm worried about. Perhaps using resource_size_t here is more appropriate, given that designs can change and put the regs above 4GiB. That way you can set the Kconfig option appropriately for both cases. josh
On Thu, Apr 9, 2009 at 7:06 AM, Roderick Colenbrander <thunderbird2k@gmail.com> wrote: > > On Thu, Apr 9, 2009 at 2:46 PM, Josh Boyer <jwboyer@linux.vnet.ibm.com> > wrote: >> >> On Wed, Apr 08, 2009 at 03:11:25PM -0600, John Linn wrote: >> >From: Suneel <[mailto:suneel.garapati@xilinx.com]> >> > >> >Added support for the new xps tft controller. >> > >> >The new core has PLB interface support in addition to existing >> >DCR interface. >> > >> >The driver has been modified to support this new core which >> >can be connected on PLB or DCR bus. >> > >> >Signed-off-by: Suneel <suneelg@xilinx.com> >> >Signed-off-by: John Linn <john.linn@xilinx.com> >> >--- >> > drivers/video/xilinxfb.c | 227 >> > ++++++++++++++++++++++++++++++++-------------- >> > 1 files changed, 160 insertions(+), 67 deletions(-) >> > >> >diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c >> >index a82c530..a28a834 100644 >> >--- a/drivers/video/xilinxfb.c >> >+++ b/drivers/video/xilinxfb.c >> >@@ -1,17 +1,24 @@ >> > /* >> >- * xilinxfb.c >> > * >> >- * Xilinx TFT LCD frame buffer driver >> >+ * Xilinx TFT frame buffer driver >> > * >> > * Author: MontaVista Software, Inc. >> > * source@mvista.com >> > * >> > * 2002-2007 (c) MontaVista Software, Inc. >> > * 2007 (c) Secret Lab Technologies, Ltd. >> >+ * 2009 (c) Xilinx Inc. >> > * >> >- * This file is licensed under the terms of the GNU General Public >> > License >> >- * version 2. This program is licensed "as is" without any warranty of >> > any >> >- * kind, whether express or implied. >> >+ * This program is free software; you can redistribute it >> >+ * and/or modify it under the terms of the GNU General Public >> >+ * License as published by the Free Software Foundation; >> >+ * either version 2 of the License, or (at your option) any >> >+ * later version. >> >+ * >> >+ * You should have received a copy of the GNU General Public >> >+ * License along with this program; if not, write to the Free >> >+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA >> >+ * 02139, USA. >> > */ >> >> What Stephen said. >> >> > #define NUM_REGS 2 >> > #define REG_FB_ADDR 0 >> >@@ -112,6 +123,11 @@ struct xilinxfb_drvdata { >> > >> > struct fb_info info; /* FB driver info record */ >> > >> >+ u32 regs_phys; /* phys. address of the control >> >+ registers */ >> >> Is this driver usable on the 440 based Xilinx devices? If so, is it >> possible >> to have the physical address of the registers above 4GiB, so is common >> with >> almost all the I/O on the other 440 boards? >> > > The driver works fine on 440 based Xilinx boards (the ML510 I use has a 440 > core). It might be nice to move physical addresses above 4GB for devices but > in all Xilinx tools and reference designs addresses below 4GB are used for > periperhals and I think even below 2GB (or even below 1GB). It depends on > the design. Regardless, it is good practice to use phys_addr_t instead of u32 for physical addresses. g.
> -----Original Message----- > From: Josh Boyer [mailto:jwboyer@linux.vnet.ibm.com] > Sent: Thursday, April 09, 2009 6:47 AM > To: John Linn > Cc: grant.likely@secretlab.ca; linuxppc-dev@ozlabs.org; > linux-fbdev-devel@lists.sourceforge.net; > akonovalov@ru.mvista.com; adaplas@gmail.com; Suneel; Suneel Garapati > Subject: Re: [PATCH] Xilinx : Framebuffer Driver: Add PLB > support (non-DCR) > > On Wed, Apr 08, 2009 at 03:11:25PM -0600, John Linn wrote: > >From: Suneel <[mailto:suneel.garapati@xilinx.com]> > > > >Added support for the new xps tft controller. > > > >The new core has PLB interface support in addition to existing > >DCR interface. > > > >The driver has been modified to support this new core which > >can be connected on PLB or DCR bus. > > > >Signed-off-by: Suneel <suneelg@xilinx.com> > >Signed-off-by: John Linn <john.linn@xilinx.com> > >--- > > drivers/video/xilinxfb.c | 227 > ++++++++++++++++++++++++++++++++-------------- > > 1 files changed, 160 insertions(+), 67 deletions(-) > > > >diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c > >index a82c530..a28a834 100644 > >--- a/drivers/video/xilinxfb.c > >+++ b/drivers/video/xilinxfb.c > >@@ -1,17 +1,24 @@ > > /* > >- * xilinxfb.c > > * > >- * Xilinx TFT LCD frame buffer driver > >+ * Xilinx TFT frame buffer driver > > * > > * Author: MontaVista Software, Inc. > > * source@mvista.com > > * > > * 2002-2007 (c) MontaVista Software, Inc. > > * 2007 (c) Secret Lab Technologies, Ltd. > >+ * 2009 (c) Xilinx Inc. > > * > >- * This file is licensed under the terms of the GNU General > Public License > >- * version 2. This program is licensed "as is" without any > warranty of any > >- * kind, whether express or implied. > >+ * This program is free software; you can redistribute it > >+ * and/or modify it under the terms of the GNU General Public > >+ * License as published by the Free Software Foundation; > >+ * either version 2 of the License, or (at your option) any > >+ * later version. > >+ * > >+ * You should have received a copy of the GNU General Public > >+ * License along with this program; if not, write to the Free > >+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA > >+ * 02139, USA. > > */ > > What Stephen said. Grant commented, I'll respin it after other comments to leave that alone. > > > #define NUM_REGS 2 > > #define REG_FB_ADDR 0 > >@@ -112,6 +123,11 @@ struct xilinxfb_drvdata { > > > > struct fb_info info; /* FB driver info record */ > > > >+ u32 regs_phys; /* phys. address of the control > >+ registers */ > > Is this driver usable on the 440 based Xilinx devices? If > so, is it possible > to have the physical address of the registers above 4GiB, so > is common with > almost all the I/O on the other 440 boards? > It is used on the 440. As Roderick said, devices are mapped using the 32 bits of address in the Xilinx tools so it would be best to stay below 4 Gig to my knowledge. > >+ void __iomem *regs; /* virt. address of the control > >+ registers */ > >+ > > dcr_host_t dcr_host; > > unsigned int dcr_start; > > unsigned int dcr_len; > >@@ -120,6 +136,10 @@ struct xilinxfb_drvdata { > > dma_addr_t fb_phys; /* phys. address of the > frame buffer */ > > int fb_alloced; /* Flag, was the fb > memory alloced? */ > > > >+ u32 dcr_splb_slave_if; > >+ /* True, if control interface is > >+ connected through plb */ > >+ > > Do you need a full 32-bit variable for a simple boolean? It > might be best for > structure alignment, but you might want to look at using a > flags variable or > something that could be extended with feature bits in a single word. It could be a flag I think. This was easy as it mapped to the device tree property. > > > u32 reg_ctrl_default; > > > > u32 pseudo_palette[PALETTE_ENTRIES_NO]; > >@@ -130,14 +150,19 @@ struct xilinxfb_drvdata { > > container_of(_info, struct xilinxfb_drvdata, info) > > > > /* > >- * The LCD controller has DCR interface to its registers, but all > >- * the boards and configurations the driver has been tested with > >- * use opb2dcr bridge. So the registers are seen as memory mapped. > >- * This macro is to make it simple to add the direct DCR access > >- * when it's needed. > >+ * The XPS TFT Controller can be accessed through PLB or > DCR interface. > >+ * To perform the read/write on the registers we need to check on > >+ * which bus its connected and call the appropriate write API. > > */ > >-#define xilinx_fb_out_be32(driverdata, offset, val) \ > >- dcr_write(driverdata->dcr_host, offset, val) > >+static void xilinx_fb_out_be32(struct xilinxfb_drvdata > *drvdata, u32 offset, > >+ u32 val) > >+{ > >+ if (drvdata->dcr_splb_slave_if == 1) > >+ out_be32(drvdata->regs + (offset << 2), val); > >+ else > >+ dcr_write(drvdata->dcr_host, offset, val); > >+ > >+} > > > > static int > > xilinx_fb_setcolreg(unsigned regno, unsigned red, unsigned > green, unsigned blue, > >@@ -175,7 +200,8 @@ xilinx_fb_blank(int blank_mode, struct > fb_info *fbi) > > switch (blank_mode) { > > case FB_BLANK_UNBLANK: > > /* turn on panel */ > >- xilinx_fb_out_be32(drvdata, REG_CTRL, > drvdata->reg_ctrl_default); > >+ xilinx_fb_out_be32(drvdata, REG_CTRL, > >+ drvdata->reg_ctrl_default); > > break; > > > > case FB_BLANK_NORMAL: > >@@ -191,8 +217,7 @@ xilinx_fb_blank(int blank_mode, struct > fb_info *fbi) > > return 0; /* success */ > > } > > > >-static struct fb_ops xilinxfb_ops = > >-{ > >+static struct fb_ops xilinxfb_ops = { > > .owner = THIS_MODULE, > > .fb_setcolreg = xilinx_fb_setcolreg, > > .fb_blank = xilinx_fb_blank, > >@@ -205,25 +230,35 @@ static struct fb_ops xilinxfb_ops = > > * Bus independent setup/teardown > > */ > > > >-static int xilinxfb_assign(struct device *dev, dcr_host_t dcr_host, > >- unsigned int dcr_start, unsigned int dcr_len, > >+static int xilinxfb_assign(struct device *dev, > >+ struct xilinxfb_drvdata *drvdata, > >+ unsigned long physaddr, > > struct xilinxfb_platform_data *pdata) > > { > >- struct xilinxfb_drvdata *drvdata; > > int rc; > > int fbsize = pdata->xvirt * pdata->yvirt * BYTES_PER_PIXEL; > > > >- /* Allocate the driver data region */ > >- drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL); > >- if (!drvdata) { > >- dev_err(dev, "Couldn't allocate device private > record\n"); > >- return -ENOMEM; > >+ if (drvdata->dcr_splb_slave_if) { > >+ /* > >+ * Map the control registers in if the controller > >+ * is on direct PLB interface. > >+ */ > >+ if (!request_mem_region(physaddr, 8, DRIVER_NAME)) { > >+ dev_err(dev, "Couldn't lock memory > region at 0x%08lX\n", > >+ physaddr); > >+ rc = -ENODEV; > >+ goto err_region; > >+ } > >+ > >+ drvdata->regs_phys = physaddr; > >+ drvdata->regs = ioremap(physaddr, 8); > >+ if (!drvdata->regs) { > >+ dev_err(dev, "Couldn't lock memory > region at 0x%08lX\n", > >+ physaddr); > >+ rc = -ENODEV; > >+ goto err_map; > >+ } > > } > >- dev_set_drvdata(dev, drvdata); > >- > >- drvdata->dcr_start = dcr_start; > >- drvdata->dcr_len = dcr_len; > >- drvdata->dcr_host = dcr_host; > > > > /* Allocate the framebuffer memory */ > > if (pdata->fb_phys) { > >@@ -238,7 +273,10 @@ static int xilinxfb_assign(struct > device *dev, dcr_host_t dcr_host, > > if (!drvdata->fb_virt) { > > dev_err(dev, "Could not allocate frame buffer > memory\n"); > > rc = -ENOMEM; > >- goto err_region; > >+ if (drvdata->dcr_splb_slave_if) > >+ goto err_fbmem; > >+ else > >+ goto err_region; > > } > > > > /* Clear (turn to black) the framebuffer */ > >@@ -251,7 +289,8 @@ static int xilinxfb_assign(struct device > *dev, dcr_host_t dcr_host, > > drvdata->reg_ctrl_default = REG_CTRL_ENABLE; > > if (pdata->rotate_screen) > > drvdata->reg_ctrl_default |= REG_CTRL_ROTATE; > >- xilinx_fb_out_be32(drvdata, REG_CTRL, > drvdata->reg_ctrl_default); > >+ xilinx_fb_out_be32(drvdata, REG_CTRL, > >+ drvdata->reg_ctrl_default); > > > > /* Fill struct fb_info */ > > drvdata->info.device = dev; > >@@ -287,9 +326,14 @@ static int xilinxfb_assign(struct > device *dev, dcr_host_t dcr_host, > > goto err_regfb; > > } > > > >+ if (drvdata->dcr_splb_slave_if) { > >+ /* Put a banner in the log (for DEBUG) */ > >+ dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr, > >+ drvdata->regs); > >+ } > > /* Put a banner in the log (for DEBUG) */ > > dev_dbg(dev, "fb: phys=%p, virt=%p, size=%x\n", > >- (void*)drvdata->fb_phys, drvdata->fb_virt, fbsize); > >+ (void *)drvdata->fb_phys, drvdata->fb_virt, fbsize); > > > > return 0; /* success */ > > > >@@ -300,9 +344,20 @@ err_cmap: > > if (drvdata->fb_alloced) > > dma_free_coherent(dev, PAGE_ALIGN(fbsize), > drvdata->fb_virt, > > drvdata->fb_phys); > >+ else > >+ iounmap(drvdata->fb_virt); > >+ > > /* Turn off the display */ > > xilinx_fb_out_be32(drvdata, REG_CTRL, 0); > > > >+err_fbmem: > >+ if (drvdata->dcr_splb_slave_if) > >+ iounmap(drvdata->regs); > >+ > >+err_map: > >+ if (drvdata->dcr_splb_slave_if) > >+ release_mem_region(physaddr, 8); > >+ > > err_region: > > kfree(drvdata); > > dev_set_drvdata(dev, NULL); > >@@ -325,11 +380,18 @@ static int xilinxfb_release(struct device *dev) > > if (drvdata->fb_alloced) > > dma_free_coherent(dev, > PAGE_ALIGN(drvdata->info.fix.smem_len), > > drvdata->fb_virt, drvdata->fb_phys); > >+ else > >+ iounmap(drvdata->fb_virt); > > > > /* Turn off the display */ > > xilinx_fb_out_be32(drvdata, REG_CTRL, 0); > > > >- dcr_unmap(drvdata->dcr_host, drvdata->dcr_len); > >+ /* Release the resources, as allocated based on interface */ > >+ if (drvdata->dcr_splb_slave_if) { > >+ iounmap(drvdata->regs); > >+ release_mem_region(drvdata->regs_phys, 8); > >+ } else > >+ dcr_unmap(drvdata->dcr_host, drvdata->dcr_len); > > > > kfree(drvdata); > > dev_set_drvdata(dev, NULL); > >@@ -341,27 +403,54 @@ static int xilinxfb_release(struct device *dev) > > * OF bus binding > > */ > > > >-#if defined(CONFIG_OF) > > static int __devinit > > xilinxfb_of_probe(struct of_device *op, const struct > of_device_id *match) > > { > > const u32 *prop; > >+ u32 *p; > >+ u32 tft_access; > > struct xilinxfb_platform_data pdata; > >+ struct resource res; > > int size, rc; > >- int start, len; > >+ int start = 0, len = 0; > > dcr_host_t dcr_host; > >+ struct xilinxfb_drvdata *drvdata; > > > > /* Copy with the default pdata (not a ptr reference!) */ > > pdata = xilinx_fb_default_pdata; > > > > dev_dbg(&op->dev, "xilinxfb_of_probe(%p, %p)\n", op, match); > > > >- start = dcr_resource_start(op->node, 0); > >- len = dcr_resource_len(op->node, 0); > >- dcr_host = dcr_map(op->node, start, len); > >- if (!DCR_MAP_OK(dcr_host)) { > >- dev_err(&op->dev, "invalid address\n"); > >- return -ENODEV; > >+ /* > >+ * To check whether the core is connected directly to DCR or PLB > >+ * interface and initialize the tft_access accordingly. > >+ */ > >+ p = (u32 *)of_get_property(op->node, > "xlnx,dcr-splb-slave-if", NULL); > >+ > >+ if (p) > >+ tft_access = *p; > >+ else > >+ tft_access = 0; /* For backward compatibility */ > >+ > >+ /* > >+ * Fill the resource structure if its direct PLB interface > >+ * otherwise fill the dcr_host structure. > >+ */ > >+ if (tft_access) { > >+ rc = of_address_to_resource(op->node, 0, &res); > >+ if (rc) { > >+ dev_err(&op->dev, "invalid address\n"); > >+ return -ENODEV; > >+ } > >+ > >+ } else { > >+ start = dcr_resource_start(op->node, 0); > >+ len = dcr_resource_len(op->node, 0); > >+ dcr_host = dcr_map(op->node, start, len); > >+ if (!DCR_MAP_OK(dcr_host)) { > >+ dev_err(&op->dev, "invalid address\n"); > >+ return -ENODEV; > >+ } > > } > > > > prop = of_get_property(op->node, "phys-size", &size); > >@@ -385,7 +474,26 @@ xilinxfb_of_probe(struct of_device *op, > const struct of_device_id *match) > > if (of_find_property(op->node, "rotate-display", NULL)) > > pdata.rotate_screen = 1; > > > >- return xilinxfb_assign(&op->dev, dcr_host, start, len, &pdata); > >+ /* Allocate the driver data region */ > >+ drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL); > >+ if (!drvdata) { > >+ dev_err(&op->dev, "Couldn't allocate device > private record\n"); > >+ return -ENOMEM; > >+ } > >+ dev_set_drvdata(&op->dev, drvdata); > >+ > >+ /* Store the tft_access value into the driverdata > structure member */ > >+ drvdata->dcr_splb_slave_if = tft_access; > >+ > >+ /* Arguments are passed based on the interface */ > >+ if (drvdata->dcr_splb_slave_if == 1) { > >+ return xilinxfb_assign(&op->dev, drvdata, > res.start, &pdata); > >+ } else { > >+ drvdata->dcr_start = start; > >+ drvdata->dcr_len = len; > >+ drvdata->dcr_host = dcr_host; > >+ return xilinxfb_assign(&op->dev, drvdata, 0, &pdata); > >+ } > > } > > > > static int __devexit xilinxfb_of_remove(struct of_device *op) > >@@ -395,6 +503,7 @@ static int __devexit > xilinxfb_of_remove(struct of_device *op) > > > > /* Match table for of_platform binding */ > > static struct of_device_id xilinxfb_of_match[] __devinitdata = { > >+ { .compatible = "xlnx,xps-tft-1.00.a", }, > > { .compatible = "xlnx,plb-tft-cntlr-ref-1.00.a", }, > > { .compatible = "xlnx,plb-dvi-cntlr-ref-1.00.c", }, > > {}, > >@@ -412,22 +521,6 @@ static struct of_platform_driver > xilinxfb_of_driver = { > > }, > > }; > > > >-/* Registration helpers to keep the number of #ifdefs to a > minimum */ > >-static inline int __init xilinxfb_of_register(void) > >-{ > >- pr_debug("xilinxfb: calling of_register_platform_driver()\n"); > >- return of_register_platform_driver(&xilinxfb_of_driver); > >-} > >- > >-static inline void __exit xilinxfb_of_unregister(void) > >-{ > >- of_unregister_platform_driver(&xilinxfb_of_driver); > >-} > >-#else /* CONFIG_OF */ > >-/* CONFIG_OF not enabled; do nothing helpers */ > >-static inline int __init xilinxfb_of_register(void) { return 0; } > >-static inline void __exit xilinxfb_of_unregister(void) { } > >-#endif /* CONFIG_OF */ > > > > /* > --------------------------------------------------------------------- > > * Module setup and teardown > >@@ -436,18 +529,18 @@ static inline void __exit > xilinxfb_of_unregister(void) { } > > static int __init > > xilinxfb_init(void) > > { > >- return xilinxfb_of_register(); > >+ return of_register_platform_driver(&xilinxfb_of_driver); > > } > > > > static void __exit > > xilinxfb_cleanup(void) > > { > >- xilinxfb_of_unregister(); > >+ of_unregister_platform_driver(&xilinxfb_of_driver); > > } > > > > module_init(xilinxfb_init); > > module_exit(xilinxfb_cleanup); > > > >-MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>"); > >-MODULE_DESCRIPTION(DRIVER_DESCRIPTION); > >+MODULE_AUTHOR("Xilinx Inc."); > >+MODULE_DESCRIPTION("Xilinx TFT frame buffer driver"); > > MODULE_LICENSE("GPL"); > > You changed the MODULE_AUTHOR here. Is that really valid? > > >-- > >1.6.2.1 > > > > > >This email and any attachments are intended for the sole use > of the named recipient(s) and contain(s) confidential > information that may be proprietary, privileged or > copyrighted under applicable law. If you are not the intended > recipient, do not read, copy, or forward this email message > or any attachments. Delete this email message and any > attachments immediately. > > > > This seems rather odd to be on a patch submission.... > Yea I know, trying to get corporate IT not do stuff like that is a full time job sometimes. Sorry about that. Thanks for the comments. -- John > josh > > This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
> -----Original Message----- > From: Grant Likely [mailto:grant.likely@secretlab.ca] > Sent: Thursday, April 09, 2009 8:35 AM > To: Roderick Colenbrander > Cc: Josh Boyer; linux-fbdev-devel@lists.sourceforge.net; > adaplas@gmail.com; Suneel Garapati; linuxppc-dev@ozlabs.org; > akonovalov@ru.mvista.com; John Linn > Subject: Re: [PATCH] Xilinx : Framebuffer Driver: Add PLB > support (non-DCR) > > On Thu, Apr 9, 2009 at 7:06 AM, Roderick Colenbrander > <thunderbird2k@gmail.com> wrote: > > > > On Thu, Apr 9, 2009 at 2:46 PM, Josh Boyer > <jwboyer@linux.vnet.ibm.com> > > wrote: > >> > >> On Wed, Apr 08, 2009 at 03:11:25PM -0600, John Linn wrote: > >> >From: Suneel <[mailto:suneel.garapati@xilinx.com]> > >> > > >> >Added support for the new xps tft controller. > >> > > >> >The new core has PLB interface support in addition to existing > >> >DCR interface. > >> > > >> >The driver has been modified to support this new core which > >> >can be connected on PLB or DCR bus. > >> > > >> >Signed-off-by: Suneel <suneelg@xilinx.com> > >> >Signed-off-by: John Linn <john.linn@xilinx.com> > >> >--- > >> > drivers/video/xilinxfb.c | 227 > >> > ++++++++++++++++++++++++++++++++-------------- > >> > 1 files changed, 160 insertions(+), 67 deletions(-) > >> > > >> >diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c > >> >index a82c530..a28a834 100644 > >> >--- a/drivers/video/xilinxfb.c > >> >+++ b/drivers/video/xilinxfb.c > >> >@@ -1,17 +1,24 @@ > >> > /* > >> >- * xilinxfb.c > >> > * > >> >- * Xilinx TFT LCD frame buffer driver > >> >+ * Xilinx TFT frame buffer driver > >> > * > >> > * Author: MontaVista Software, Inc. > >> > * source@mvista.com > >> > * > >> > * 2002-2007 (c) MontaVista Software, Inc. > >> > * 2007 (c) Secret Lab Technologies, Ltd. > >> >+ * 2009 (c) Xilinx Inc. > >> > * > >> >- * This file is licensed under the terms of the GNU > General Public > >> > License > >> >- * version 2. This program is licensed "as is" without > any warranty of > >> > any > >> >- * kind, whether express or implied. > >> >+ * This program is free software; you can redistribute it > >> >+ * and/or modify it under the terms of the GNU General Public > >> >+ * License as published by the Free Software Foundation; > >> >+ * either version 2 of the License, or (at your option) any > >> >+ * later version. > >> >+ * > >> >+ * You should have received a copy of the GNU General Public > >> >+ * License along with this program; if not, write to the Free > >> >+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA > >> >+ * 02139, USA. > >> > */ > >> > >> What Stephen said. > >> > >> > #define NUM_REGS 2 > >> > #define REG_FB_ADDR 0 > >> >@@ -112,6 +123,11 @@ struct xilinxfb_drvdata { > >> > > >> > struct fb_info info; /* FB driver info record */ > >> > > >> >+ u32 regs_phys; /* phys. address > of the control > >> >+ registers */ > >> > >> Is this driver usable on the 440 based Xilinx devices? If > so, is it > >> possible > >> to have the physical address of the registers above 4GiB, > so is common > >> with > >> almost all the I/O on the other 440 boards? > >> > > > > The driver works fine on 440 based Xilinx boards (the ML510 > I use has a 440 > > core). It might be nice to move physical addresses above > 4GB for devices but > > in all Xilinx tools and reference designs addresses below > 4GB are used for > > periperhals and I think even below 2GB (or even below 1GB). > It depends on > > the design. > > Regardless, it is good practice to use phys_addr_t instead of u32 for > physical addresses. > I can change that when I respin to incorporate comments. Thanks, John > g. > > -- > Grant Likely, B.Sc., P.Eng. > Secret Lab Technologies Ltd. > > This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
Forgot one at the end, sorry. > -----Original Message----- > From: Josh Boyer [mailto:jwboyer@linux.vnet.ibm.com] > Sent: Thursday, April 09, 2009 6:47 AM > To: John Linn > Cc: grant.likely@secretlab.ca; linuxppc-dev@ozlabs.org; > linux-fbdev-devel@lists.sourceforge.net; > akonovalov@ru.mvista.com; adaplas@gmail.com; Suneel; Suneel Garapati > Subject: Re: [PATCH] Xilinx : Framebuffer Driver: Add PLB > support (non-DCR) > > On Wed, Apr 08, 2009 at 03:11:25PM -0600, John Linn wrote: > >From: Suneel <[mailto:suneel.garapati@xilinx.com]> > > > >Added support for the new xps tft controller. > > > >The new core has PLB interface support in addition to existing > >DCR interface. > > > >The driver has been modified to support this new core which > >can be connected on PLB or DCR bus. > > > >Signed-off-by: Suneel <suneelg@xilinx.com> > >Signed-off-by: John Linn <john.linn@xilinx.com> > >--- > > drivers/video/xilinxfb.c | 227 > ++++++++++++++++++++++++++++++++-------------- > > 1 files changed, 160 insertions(+), 67 deletions(-) > > > >diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c > >index a82c530..a28a834 100644 > >--- a/drivers/video/xilinxfb.c > >+++ b/drivers/video/xilinxfb.c > >@@ -1,17 +1,24 @@ > > /* > >- * xilinxfb.c > > * > >- * Xilinx TFT LCD frame buffer driver > >+ * Xilinx TFT frame buffer driver > > * > > * Author: MontaVista Software, Inc. > > * source@mvista.com > > * > > * 2002-2007 (c) MontaVista Software, Inc. > > * 2007 (c) Secret Lab Technologies, Ltd. > >+ * 2009 (c) Xilinx Inc. > > * > >- * This file is licensed under the terms of the GNU General > Public License > >- * version 2. This program is licensed "as is" without any > warranty of any > >- * kind, whether express or implied. > >+ * This program is free software; you can redistribute it > >+ * and/or modify it under the terms of the GNU General Public > >+ * License as published by the Free Software Foundation; > >+ * either version 2 of the License, or (at your option) any > >+ * later version. > >+ * > >+ * You should have received a copy of the GNU General Public > >+ * License along with this program; if not, write to the Free > >+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA > >+ * 02139, USA. > > */ > > What Stephen said. > > > #define NUM_REGS 2 > > #define REG_FB_ADDR 0 > >@@ -112,6 +123,11 @@ struct xilinxfb_drvdata { > > > > struct fb_info info; /* FB driver info record */ > > > >+ u32 regs_phys; /* phys. address of the control > >+ registers */ > > Is this driver usable on the 440 based Xilinx devices? If > so, is it possible > to have the physical address of the registers above 4GiB, so > is common with > almost all the I/O on the other 440 boards? > > >+ void __iomem *regs; /* virt. address of the control > >+ registers */ > >+ > > dcr_host_t dcr_host; > > unsigned int dcr_start; > > unsigned int dcr_len; > >@@ -120,6 +136,10 @@ struct xilinxfb_drvdata { > > dma_addr_t fb_phys; /* phys. address of the > frame buffer */ > > int fb_alloced; /* Flag, was the fb > memory alloced? */ > > > >+ u32 dcr_splb_slave_if; > >+ /* True, if control interface is > >+ connected through plb */ > >+ > > Do you need a full 32-bit variable for a simple boolean? It > might be best for > structure alignment, but you might want to look at using a > flags variable or > something that could be extended with feature bits in a single word. > > > u32 reg_ctrl_default; > > > > u32 pseudo_palette[PALETTE_ENTRIES_NO]; > >@@ -130,14 +150,19 @@ struct xilinxfb_drvdata { > > container_of(_info, struct xilinxfb_drvdata, info) > > > > /* > >- * The LCD controller has DCR interface to its registers, but all > >- * the boards and configurations the driver has been tested with > >- * use opb2dcr bridge. So the registers are seen as memory mapped. > >- * This macro is to make it simple to add the direct DCR access > >- * when it's needed. > >+ * The XPS TFT Controller can be accessed through PLB or > DCR interface. > >+ * To perform the read/write on the registers we need to check on > >+ * which bus its connected and call the appropriate write API. > > */ > >-#define xilinx_fb_out_be32(driverdata, offset, val) \ > >- dcr_write(driverdata->dcr_host, offset, val) > >+static void xilinx_fb_out_be32(struct xilinxfb_drvdata > *drvdata, u32 offset, > >+ u32 val) > >+{ > >+ if (drvdata->dcr_splb_slave_if == 1) > >+ out_be32(drvdata->regs + (offset << 2), val); > >+ else > >+ dcr_write(drvdata->dcr_host, offset, val); > >+ > >+} > > > > static int > > xilinx_fb_setcolreg(unsigned regno, unsigned red, unsigned > green, unsigned blue, > >@@ -175,7 +200,8 @@ xilinx_fb_blank(int blank_mode, struct > fb_info *fbi) > > switch (blank_mode) { > > case FB_BLANK_UNBLANK: > > /* turn on panel */ > >- xilinx_fb_out_be32(drvdata, REG_CTRL, > drvdata->reg_ctrl_default); > >+ xilinx_fb_out_be32(drvdata, REG_CTRL, > >+ drvdata->reg_ctrl_default); > > break; > > > > case FB_BLANK_NORMAL: > >@@ -191,8 +217,7 @@ xilinx_fb_blank(int blank_mode, struct > fb_info *fbi) > > return 0; /* success */ > > } > > > >-static struct fb_ops xilinxfb_ops = > >-{ > >+static struct fb_ops xilinxfb_ops = { > > .owner = THIS_MODULE, > > .fb_setcolreg = xilinx_fb_setcolreg, > > .fb_blank = xilinx_fb_blank, > >@@ -205,25 +230,35 @@ static struct fb_ops xilinxfb_ops = > > * Bus independent setup/teardown > > */ > > > >-static int xilinxfb_assign(struct device *dev, dcr_host_t dcr_host, > >- unsigned int dcr_start, unsigned int dcr_len, > >+static int xilinxfb_assign(struct device *dev, > >+ struct xilinxfb_drvdata *drvdata, > >+ unsigned long physaddr, > > struct xilinxfb_platform_data *pdata) > > { > >- struct xilinxfb_drvdata *drvdata; > > int rc; > > int fbsize = pdata->xvirt * pdata->yvirt * BYTES_PER_PIXEL; > > > >- /* Allocate the driver data region */ > >- drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL); > >- if (!drvdata) { > >- dev_err(dev, "Couldn't allocate device private > record\n"); > >- return -ENOMEM; > >+ if (drvdata->dcr_splb_slave_if) { > >+ /* > >+ * Map the control registers in if the controller > >+ * is on direct PLB interface. > >+ */ > >+ if (!request_mem_region(physaddr, 8, DRIVER_NAME)) { > >+ dev_err(dev, "Couldn't lock memory > region at 0x%08lX\n", > >+ physaddr); > >+ rc = -ENODEV; > >+ goto err_region; > >+ } > >+ > >+ drvdata->regs_phys = physaddr; > >+ drvdata->regs = ioremap(physaddr, 8); > >+ if (!drvdata->regs) { > >+ dev_err(dev, "Couldn't lock memory > region at 0x%08lX\n", > >+ physaddr); > >+ rc = -ENODEV; > >+ goto err_map; > >+ } > > } > >- dev_set_drvdata(dev, drvdata); > >- > >- drvdata->dcr_start = dcr_start; > >- drvdata->dcr_len = dcr_len; > >- drvdata->dcr_host = dcr_host; > > > > /* Allocate the framebuffer memory */ > > if (pdata->fb_phys) { > >@@ -238,7 +273,10 @@ static int xilinxfb_assign(struct > device *dev, dcr_host_t dcr_host, > > if (!drvdata->fb_virt) { > > dev_err(dev, "Could not allocate frame buffer > memory\n"); > > rc = -ENOMEM; > >- goto err_region; > >+ if (drvdata->dcr_splb_slave_if) > >+ goto err_fbmem; > >+ else > >+ goto err_region; > > } > > > > /* Clear (turn to black) the framebuffer */ > >@@ -251,7 +289,8 @@ static int xilinxfb_assign(struct device > *dev, dcr_host_t dcr_host, > > drvdata->reg_ctrl_default = REG_CTRL_ENABLE; > > if (pdata->rotate_screen) > > drvdata->reg_ctrl_default |= REG_CTRL_ROTATE; > >- xilinx_fb_out_be32(drvdata, REG_CTRL, > drvdata->reg_ctrl_default); > >+ xilinx_fb_out_be32(drvdata, REG_CTRL, > >+ drvdata->reg_ctrl_default); > > > > /* Fill struct fb_info */ > > drvdata->info.device = dev; > >@@ -287,9 +326,14 @@ static int xilinxfb_assign(struct > device *dev, dcr_host_t dcr_host, > > goto err_regfb; > > } > > > >+ if (drvdata->dcr_splb_slave_if) { > >+ /* Put a banner in the log (for DEBUG) */ > >+ dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr, > >+ drvdata->regs); > >+ } > > /* Put a banner in the log (for DEBUG) */ > > dev_dbg(dev, "fb: phys=%p, virt=%p, size=%x\n", > >- (void*)drvdata->fb_phys, drvdata->fb_virt, fbsize); > >+ (void *)drvdata->fb_phys, drvdata->fb_virt, fbsize); > > > > return 0; /* success */ > > > >@@ -300,9 +344,20 @@ err_cmap: > > if (drvdata->fb_alloced) > > dma_free_coherent(dev, PAGE_ALIGN(fbsize), > drvdata->fb_virt, > > drvdata->fb_phys); > >+ else > >+ iounmap(drvdata->fb_virt); > >+ > > /* Turn off the display */ > > xilinx_fb_out_be32(drvdata, REG_CTRL, 0); > > > >+err_fbmem: > >+ if (drvdata->dcr_splb_slave_if) > >+ iounmap(drvdata->regs); > >+ > >+err_map: > >+ if (drvdata->dcr_splb_slave_if) > >+ release_mem_region(physaddr, 8); > >+ > > err_region: > > kfree(drvdata); > > dev_set_drvdata(dev, NULL); > >@@ -325,11 +380,18 @@ static int xilinxfb_release(struct device *dev) > > if (drvdata->fb_alloced) > > dma_free_coherent(dev, > PAGE_ALIGN(drvdata->info.fix.smem_len), > > drvdata->fb_virt, drvdata->fb_phys); > >+ else > >+ iounmap(drvdata->fb_virt); > > > > /* Turn off the display */ > > xilinx_fb_out_be32(drvdata, REG_CTRL, 0); > > > >- dcr_unmap(drvdata->dcr_host, drvdata->dcr_len); > >+ /* Release the resources, as allocated based on interface */ > >+ if (drvdata->dcr_splb_slave_if) { > >+ iounmap(drvdata->regs); > >+ release_mem_region(drvdata->regs_phys, 8); > >+ } else > >+ dcr_unmap(drvdata->dcr_host, drvdata->dcr_len); > > > > kfree(drvdata); > > dev_set_drvdata(dev, NULL); > >@@ -341,27 +403,54 @@ static int xilinxfb_release(struct device *dev) > > * OF bus binding > > */ > > > >-#if defined(CONFIG_OF) > > static int __devinit > > xilinxfb_of_probe(struct of_device *op, const struct > of_device_id *match) > > { > > const u32 *prop; > >+ u32 *p; > >+ u32 tft_access; > > struct xilinxfb_platform_data pdata; > >+ struct resource res; > > int size, rc; > >- int start, len; > >+ int start = 0, len = 0; > > dcr_host_t dcr_host; > >+ struct xilinxfb_drvdata *drvdata; > > > > /* Copy with the default pdata (not a ptr reference!) */ > > pdata = xilinx_fb_default_pdata; > > > > dev_dbg(&op->dev, "xilinxfb_of_probe(%p, %p)\n", op, match); > > > >- start = dcr_resource_start(op->node, 0); > >- len = dcr_resource_len(op->node, 0); > >- dcr_host = dcr_map(op->node, start, len); > >- if (!DCR_MAP_OK(dcr_host)) { > >- dev_err(&op->dev, "invalid address\n"); > >- return -ENODEV; > >+ /* > >+ * To check whether the core is connected directly to DCR or PLB > >+ * interface and initialize the tft_access accordingly. > >+ */ > >+ p = (u32 *)of_get_property(op->node, > "xlnx,dcr-splb-slave-if", NULL); > >+ > >+ if (p) > >+ tft_access = *p; > >+ else > >+ tft_access = 0; /* For backward compatibility */ > >+ > >+ /* > >+ * Fill the resource structure if its direct PLB interface > >+ * otherwise fill the dcr_host structure. > >+ */ > >+ if (tft_access) { > >+ rc = of_address_to_resource(op->node, 0, &res); > >+ if (rc) { > >+ dev_err(&op->dev, "invalid address\n"); > >+ return -ENODEV; > >+ } > >+ > >+ } else { > >+ start = dcr_resource_start(op->node, 0); > >+ len = dcr_resource_len(op->node, 0); > >+ dcr_host = dcr_map(op->node, start, len); > >+ if (!DCR_MAP_OK(dcr_host)) { > >+ dev_err(&op->dev, "invalid address\n"); > >+ return -ENODEV; > >+ } > > } > > > > prop = of_get_property(op->node, "phys-size", &size); > >@@ -385,7 +474,26 @@ xilinxfb_of_probe(struct of_device *op, > const struct of_device_id *match) > > if (of_find_property(op->node, "rotate-display", NULL)) > > pdata.rotate_screen = 1; > > > >- return xilinxfb_assign(&op->dev, dcr_host, start, len, &pdata); > >+ /* Allocate the driver data region */ > >+ drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL); > >+ if (!drvdata) { > >+ dev_err(&op->dev, "Couldn't allocate device > private record\n"); > >+ return -ENOMEM; > >+ } > >+ dev_set_drvdata(&op->dev, drvdata); > >+ > >+ /* Store the tft_access value into the driverdata > structure member */ > >+ drvdata->dcr_splb_slave_if = tft_access; > >+ > >+ /* Arguments are passed based on the interface */ > >+ if (drvdata->dcr_splb_slave_if == 1) { > >+ return xilinxfb_assign(&op->dev, drvdata, > res.start, &pdata); > >+ } else { > >+ drvdata->dcr_start = start; > >+ drvdata->dcr_len = len; > >+ drvdata->dcr_host = dcr_host; > >+ return xilinxfb_assign(&op->dev, drvdata, 0, &pdata); > >+ } > > } > > > > static int __devexit xilinxfb_of_remove(struct of_device *op) > >@@ -395,6 +503,7 @@ static int __devexit > xilinxfb_of_remove(struct of_device *op) > > > > /* Match table for of_platform binding */ > > static struct of_device_id xilinxfb_of_match[] __devinitdata = { > >+ { .compatible = "xlnx,xps-tft-1.00.a", }, > > { .compatible = "xlnx,plb-tft-cntlr-ref-1.00.a", }, > > { .compatible = "xlnx,plb-dvi-cntlr-ref-1.00.c", }, > > {}, > >@@ -412,22 +521,6 @@ static struct of_platform_driver > xilinxfb_of_driver = { > > }, > > }; > > > >-/* Registration helpers to keep the number of #ifdefs to a > minimum */ > >-static inline int __init xilinxfb_of_register(void) > >-{ > >- pr_debug("xilinxfb: calling of_register_platform_driver()\n"); > >- return of_register_platform_driver(&xilinxfb_of_driver); > >-} > >- > >-static inline void __exit xilinxfb_of_unregister(void) > >-{ > >- of_unregister_platform_driver(&xilinxfb_of_driver); > >-} > >-#else /* CONFIG_OF */ > >-/* CONFIG_OF not enabled; do nothing helpers */ > >-static inline int __init xilinxfb_of_register(void) { return 0; } > >-static inline void __exit xilinxfb_of_unregister(void) { } > >-#endif /* CONFIG_OF */ > > > > /* > --------------------------------------------------------------------- > > * Module setup and teardown > >@@ -436,18 +529,18 @@ static inline void __exit > xilinxfb_of_unregister(void) { } > > static int __init > > xilinxfb_init(void) > > { > >- return xilinxfb_of_register(); > >+ return of_register_platform_driver(&xilinxfb_of_driver); > > } > > > > static void __exit > > xilinxfb_cleanup(void) > > { > >- xilinxfb_of_unregister(); > >+ of_unregister_platform_driver(&xilinxfb_of_driver); > > } > > > > module_init(xilinxfb_init); > > module_exit(xilinxfb_cleanup); > > > >-MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>"); > >-MODULE_DESCRIPTION(DRIVER_DESCRIPTION); > >+MODULE_AUTHOR("Xilinx Inc."); > >+MODULE_DESCRIPTION("Xilinx TFT frame buffer driver"); > > MODULE_LICENSE("GPL"); > > You changed the MODULE_AUTHOR here. Is that really valid? > Forgot this one, we'll change it back, no need to change that. Thanks, john > >-- > >1.6.2.1 > > > > > >This email and any attachments are intended for the sole use > of the named recipient(s) and contain(s) confidential > information that may be proprietary, privileged or > copyrighted under applicable law. If you are not the intended > recipient, do not read, copy, or forward this email message > or any attachments. Delete this email message and any > attachments immediately. > > > > This seems rather odd to be on a patch submission.... > > josh > > This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
> > -----Original Message----- > > From: Stephen Rothwell [mailto:sfr@canb.auug.org.au] > > Sent: Wednesday, April 08, 2009 7:52 PM > > To: John Linn > > Cc: grant.likely@secretlab.ca; jwboyer@linux.vnet.ibm.com; > > linuxppc-dev@ozlabs.org; > > linux-fbdev-devel@lists.sourceforge.net; > > akonovalov@ru.mvista.com; adaplas@gmail.com; Suneel Garapati; Suneel > > Subject: Re: [PATCH] Xilinx : Framebuffer Driver: Add PLB > > support (non-DCR) > > > > Hi John, > > > > On Wed, 8 Apr 2009 15:11:25 -0600 John Linn > > <john.linn@xilinx.com> wrote: > > > > > > * 2002-2007 (c) MontaVista Software, Inc. > > > * 2007 (c) Secret Lab Technologies, Ltd. > > > + * 2009 (c) Xilinx Inc. > > > * > > > - * This file is licensed under the terms of the GNU > > General Public License > > > - * version 2. This program is licensed "as is" without > > any warranty of any > > > - * kind, whether express or implied. > > > + * This program is free software; you can redistribute it > > > + * and/or modify it under the terms of the GNU General Public > > > + * License as published by the Free Software Foundation; > > > + * either version 2 of the License, or (at your option) any > > > + * later version. > > > + * > > > + * You should have received a copy of the GNU General Public > > > + * License along with this program; if not, write to the Free > > > + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA > > > + * 02139, USA. > > > > This changes the license for this file (from "GPLv2" to "GPLv2 or > > later"). Have you asked the other copyright owners about that? > > Andrei was copied on the patch, we'll see if he has any thoughts about > it. Although I work for MontaVista, I don't speak for them on licensing issues. In my opinion, unless someone can come up with a compelling reason for changing the license terms of a file, they shouldn't be changed. MontaVista made a deliberate, considered decision to license that file under GPLv2 and not "GPLv2 or later". Those who use and distribute modifications to GPLv2 licensed work need to respect the license. -Dale
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c index a82c530..a28a834 100644 --- a/drivers/video/xilinxfb.c +++ b/drivers/video/xilinxfb.c @@ -1,17 +1,24 @@ /* - * xilinxfb.c * - * Xilinx TFT LCD frame buffer driver + * Xilinx TFT frame buffer driver * * Author: MontaVista Software, Inc. * source@mvista.com * * 2002-2007 (c) MontaVista Software, Inc. * 2007 (c) Secret Lab Technologies, Ltd. + * 2009 (c) Xilinx Inc. * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. + * This program is free software; you can redistribute it + * and/or modify it under the terms of the GNU General Public + * License as published by the Free Software Foundation; + * either version 2 of the License, or (at your option) any + * later version. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the Free + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA + * 02139, USA. */ /* @@ -31,27 +38,31 @@ #include <linux/fb.h> #include <linux/init.h> #include <linux/dma-mapping.h> -#if defined(CONFIG_OF) #include <linux/of_device.h> #include <linux/of_platform.h> -#endif -#include <asm/io.h> +#include <linux/io.h> #include <linux/xilinxfb.h> #include <asm/dcr.h> #define DRIVER_NAME "xilinxfb" -#define DRIVER_DESCRIPTION "Xilinx TFT LCD frame buffer driver" + /* * Xilinx calls it "PLB TFT LCD Controller" though it can also be used for - * the VGA port on the Xilinx ML40x board. This is a hardware display controller - * for a 640x480 resolution TFT or VGA screen. + * the VGA port on the Xilinx ML40x board. This is a hardware display + * controller for a 640x480 resolution TFT or VGA screen. * * The interface to the framebuffer is nice and simple. There are two * control registers. The first tells the LCD interface where in memory * the frame buffer is (only the 11 most significant bits are used, so * don't start thinking about scrolling). The second allows the LCD to * be turned on or off as well as rotated 180 degrees. + * + * In case of direct PLB access the second control register will be at + * an offset of 4 as compared to the DCR access where the offset is 1 + * i.e. REG_CTRL. So this is taken care in the function + * xilinx_fb_out_be32 where it left shifts the offset 2 times in case of + * direct PLB access. */ #define NUM_REGS 2 #define REG_FB_ADDR 0 @@ -112,6 +123,11 @@ struct xilinxfb_drvdata { struct fb_info info; /* FB driver info record */ + u32 regs_phys; /* phys. address of the control + registers */ + void __iomem *regs; /* virt. address of the control + registers */ + dcr_host_t dcr_host; unsigned int dcr_start; unsigned int dcr_len; @@ -120,6 +136,10 @@ struct xilinxfb_drvdata { dma_addr_t fb_phys; /* phys. address of the frame buffer */ int fb_alloced; /* Flag, was the fb memory alloced? */ + u32 dcr_splb_slave_if; + /* True, if control interface is + connected through plb */ + u32 reg_ctrl_default; u32 pseudo_palette[PALETTE_ENTRIES_NO]; @@ -130,14 +150,19 @@ struct xilinxfb_drvdata { container_of(_info, struct xilinxfb_drvdata, info) /* - * The LCD controller has DCR interface to its registers, but all - * the boards and configurations the driver has been tested with - * use opb2dcr bridge. So the registers are seen as memory mapped. - * This macro is to make it simple to add the direct DCR access - * when it's needed. + * The XPS TFT Controller can be accessed through PLB or DCR interface. + * To perform the read/write on the registers we need to check on + * which bus its connected and call the appropriate write API. */ -#define xilinx_fb_out_be32(driverdata, offset, val) \ - dcr_write(driverdata->dcr_host, offset, val) +static void xilinx_fb_out_be32(struct xilinxfb_drvdata *drvdata, u32 offset, + u32 val) +{ + if (drvdata->dcr_splb_slave_if == 1) + out_be32(drvdata->regs + (offset << 2), val); + else + dcr_write(drvdata->dcr_host, offset, val); + +} static int xilinx_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, @@ -175,7 +200,8 @@ xilinx_fb_blank(int blank_mode, struct fb_info *fbi) switch (blank_mode) { case FB_BLANK_UNBLANK: /* turn on panel */ - xilinx_fb_out_be32(drvdata, REG_CTRL, drvdata->reg_ctrl_default); + xilinx_fb_out_be32(drvdata, REG_CTRL, + drvdata->reg_ctrl_default); break; case FB_BLANK_NORMAL: @@ -191,8 +217,7 @@ xilinx_fb_blank(int blank_mode, struct fb_info *fbi) return 0; /* success */ } -static struct fb_ops xilinxfb_ops = -{ +static struct fb_ops xilinxfb_ops = { .owner = THIS_MODULE, .fb_setcolreg = xilinx_fb_setcolreg, .fb_blank = xilinx_fb_blank, @@ -205,25 +230,35 @@ static struct fb_ops xilinxfb_ops = * Bus independent setup/teardown */ -static int xilinxfb_assign(struct device *dev, dcr_host_t dcr_host, - unsigned int dcr_start, unsigned int dcr_len, +static int xilinxfb_assign(struct device *dev, + struct xilinxfb_drvdata *drvdata, + unsigned long physaddr, struct xilinxfb_platform_data *pdata) { - struct xilinxfb_drvdata *drvdata; int rc; int fbsize = pdata->xvirt * pdata->yvirt * BYTES_PER_PIXEL; - /* Allocate the driver data region */ - drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL); - if (!drvdata) { - dev_err(dev, "Couldn't allocate device private record\n"); - return -ENOMEM; + if (drvdata->dcr_splb_slave_if) { + /* + * Map the control registers in if the controller + * is on direct PLB interface. + */ + if (!request_mem_region(physaddr, 8, DRIVER_NAME)) { + dev_err(dev, "Couldn't lock memory region at 0x%08lX\n", + physaddr); + rc = -ENODEV; + goto err_region; + } + + drvdata->regs_phys = physaddr; + drvdata->regs = ioremap(physaddr, 8); + if (!drvdata->regs) { + dev_err(dev, "Couldn't lock memory region at 0x%08lX\n", + physaddr); + rc = -ENODEV; + goto err_map; + } } - dev_set_drvdata(dev, drvdata); - - drvdata->dcr_start = dcr_start; - drvdata->dcr_len = dcr_len; - drvdata->dcr_host = dcr_host; /* Allocate the framebuffer memory */ if (pdata->fb_phys) { @@ -238,7 +273,10 @@ static int xilinxfb_assign(struct device *dev, dcr_host_t dcr_host, if (!drvdata->fb_virt) { dev_err(dev, "Could not allocate frame buffer memory\n"); rc = -ENOMEM; - goto err_region; + if (drvdata->dcr_splb_slave_if) + goto err_fbmem; + else + goto err_region; } /* Clear (turn to black) the framebuffer */ @@ -251,7 +289,8 @@ static int xilinxfb_assign(struct device *dev, dcr_host_t dcr_host, drvdata->reg_ctrl_default = REG_CTRL_ENABLE; if (pdata->rotate_screen) drvdata->reg_ctrl_default |= REG_CTRL_ROTATE; - xilinx_fb_out_be32(drvdata, REG_CTRL, drvdata->reg_ctrl_default); + xilinx_fb_out_be32(drvdata, REG_CTRL, + drvdata->reg_ctrl_default); /* Fill struct fb_info */ drvdata->info.device = dev; @@ -287,9 +326,14 @@ static int xilinxfb_assign(struct device *dev, dcr_host_t dcr_host, goto err_regfb; } + if (drvdata->dcr_splb_slave_if) { + /* Put a banner in the log (for DEBUG) */ + dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr, + drvdata->regs); + } /* Put a banner in the log (for DEBUG) */ dev_dbg(dev, "fb: phys=%p, virt=%p, size=%x\n", - (void*)drvdata->fb_phys, drvdata->fb_virt, fbsize); + (void *)drvdata->fb_phys, drvdata->fb_virt, fbsize); return 0; /* success */ @@ -300,9 +344,20 @@ err_cmap: if (drvdata->fb_alloced) dma_free_coherent(dev, PAGE_ALIGN(fbsize), drvdata->fb_virt, drvdata->fb_phys); + else + iounmap(drvdata->fb_virt); + /* Turn off the display */ xilinx_fb_out_be32(drvdata, REG_CTRL, 0); +err_fbmem: + if (drvdata->dcr_splb_slave_if) + iounmap(drvdata->regs); + +err_map: + if (drvdata->dcr_splb_slave_if) + release_mem_region(physaddr, 8); + err_region: kfree(drvdata); dev_set_drvdata(dev, NULL); @@ -325,11 +380,18 @@ static int xilinxfb_release(struct device *dev) if (drvdata->fb_alloced) dma_free_coherent(dev, PAGE_ALIGN(drvdata->info.fix.smem_len), drvdata->fb_virt, drvdata->fb_phys); + else + iounmap(drvdata->fb_virt); /* Turn off the display */ xilinx_fb_out_be32(drvdata, REG_CTRL, 0); - dcr_unmap(drvdata->dcr_host, drvdata->dcr_len); + /* Release the resources, as allocated based on interface */ + if (drvdata->dcr_splb_slave_if) { + iounmap(drvdata->regs); + release_mem_region(drvdata->regs_phys, 8); + } else + dcr_unmap(drvdata->dcr_host, drvdata->dcr_len); kfree(drvdata); dev_set_drvdata(dev, NULL); @@ -341,27 +403,54 @@ static int xilinxfb_release(struct device *dev) * OF bus binding */ -#if defined(CONFIG_OF) static int __devinit xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match) { const u32 *prop; + u32 *p; + u32 tft_access; struct xilinxfb_platform_data pdata; + struct resource res; int size, rc; - int start, len; + int start = 0, len = 0; dcr_host_t dcr_host; + struct xilinxfb_drvdata *drvdata; /* Copy with the default pdata (not a ptr reference!) */ pdata = xilinx_fb_default_pdata; dev_dbg(&op->dev, "xilinxfb_of_probe(%p, %p)\n", op, match); - start = dcr_resource_start(op->node, 0); - len = dcr_resource_len(op->node, 0); - dcr_host = dcr_map(op->node, start, len); - if (!DCR_MAP_OK(dcr_host)) { - dev_err(&op->dev, "invalid address\n"); - return -ENODEV; + /* + * To check whether the core is connected directly to DCR or PLB + * interface and initialize the tft_access accordingly. + */ + p = (u32 *)of_get_property(op->node, "xlnx,dcr-splb-slave-if", NULL); + + if (p) + tft_access = *p; + else + tft_access = 0; /* For backward compatibility */ + + /* + * Fill the resource structure if its direct PLB interface + * otherwise fill the dcr_host structure. + */ + if (tft_access) { + rc = of_address_to_resource(op->node, 0, &res); + if (rc) { + dev_err(&op->dev, "invalid address\n"); + return -ENODEV; + } + + } else { + start = dcr_resource_start(op->node, 0); + len = dcr_resource_len(op->node, 0); + dcr_host = dcr_map(op->node, start, len); + if (!DCR_MAP_OK(dcr_host)) { + dev_err(&op->dev, "invalid address\n"); + return -ENODEV; + } } prop = of_get_property(op->node, "phys-size", &size); @@ -385,7 +474,26 @@ xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match) if (of_find_property(op->node, "rotate-display", NULL)) pdata.rotate_screen = 1; - return xilinxfb_assign(&op->dev, dcr_host, start, len, &pdata); + /* Allocate the driver data region */ + drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL); + if (!drvdata) { + dev_err(&op->dev, "Couldn't allocate device private record\n"); + return -ENOMEM; + } + dev_set_drvdata(&op->dev, drvdata); + + /* Store the tft_access value into the driverdata structure member */ + drvdata->dcr_splb_slave_if = tft_access; + + /* Arguments are passed based on the interface */ + if (drvdata->dcr_splb_slave_if == 1) { + return xilinxfb_assign(&op->dev, drvdata, res.start, &pdata); + } else { + drvdata->dcr_start = start; + drvdata->dcr_len = len; + drvdata->dcr_host = dcr_host; + return xilinxfb_assign(&op->dev, drvdata, 0, &pdata); + } } static int __devexit xilinxfb_of_remove(struct of_device *op) @@ -395,6 +503,7 @@ static int __devexit xilinxfb_of_remove(struct of_device *op) /* Match table for of_platform binding */ static struct of_device_id xilinxfb_of_match[] __devinitdata = { + { .compatible = "xlnx,xps-tft-1.00.a", }, { .compatible = "xlnx,plb-tft-cntlr-ref-1.00.a", }, { .compatible = "xlnx,plb-dvi-cntlr-ref-1.00.c", }, {}, @@ -412,22 +521,6 @@ static struct of_platform_driver xilinxfb_of_driver = { }, }; -/* Registration helpers to keep the number of #ifdefs to a minimum */ -static inline int __init xilinxfb_of_register(void) -{ - pr_debug("xilinxfb: calling of_register_platform_driver()\n"); - return of_register_platform_driver(&xilinxfb_of_driver); -} - -static inline void __exit xilinxfb_of_unregister(void) -{ - of_unregister_platform_driver(&xilinxfb_of_driver); -} -#else /* CONFIG_OF */ -/* CONFIG_OF not enabled; do nothing helpers */ -static inline int __init xilinxfb_of_register(void) { return 0; } -static inline void __exit xilinxfb_of_unregister(void) { } -#endif /* CONFIG_OF */ /* --------------------------------------------------------------------- * Module setup and teardown @@ -436,18 +529,18 @@ static inline void __exit xilinxfb_of_unregister(void) { } static int __init xilinxfb_init(void) { - return xilinxfb_of_register(); + return of_register_platform_driver(&xilinxfb_of_driver); } static void __exit xilinxfb_cleanup(void) { - xilinxfb_of_unregister(); + of_unregister_platform_driver(&xilinxfb_of_driver); } module_init(xilinxfb_init); module_exit(xilinxfb_cleanup); -MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>"); -MODULE_DESCRIPTION(DRIVER_DESCRIPTION); +MODULE_AUTHOR("Xilinx Inc."); +MODULE_DESCRIPTION("Xilinx TFT frame buffer driver"); MODULE_LICENSE("GPL");