[U-Boot,v2,1/7] USB: xHCI: Add stack support for xHCI

This adds stack layer for eXtensible Host Controller Interface
which facilitates use of USB 3.0 in host mode.

Adapting xHCI host controller driver in linux-kernel
by Sarah Sharp to needs in u-boot.

This adds the basic xHCI host controller driver with bare minimum
features:
- Control/Bulk transfer support has been added with required
  infrastructure for necessary xHC data structures.
- Stream protocol hasn't been supported yet.
- No support for quirky devices has been added.

Signed-off-by: Vikas C Sajjan <vikas.sajjan@samsung.com>
Signed-off-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Marek Vasut <marex@denx.de>
---
 common/usb.c                 |   27 +-
 drivers/usb/host/Makefile    |    3 +
 drivers/usb/host/xhci-mem.c  |  731 ++++++++++++++++++++++++
 drivers/usb/host/xhci-ring.c |  950 +++++++++++++++++++++++++++++++
 drivers/usb/host/xhci.c      | 1040 ++++++++++++++++++++++++++++++++++
 drivers/usb/host/xhci.h      | 1280 ++++++++++++++++++++++++++++++++++++++++++
 include/usb.h                |    9 +-
 7 files changed, 4037 insertions(+), 3 deletions(-)
 create mode 100644 drivers/usb/host/xhci-mem.c
 create mode 100644 drivers/usb/host/xhci-ring.c
 create mode 100644 drivers/usb/host/xhci.c
 create mode 100644 drivers/usb/host/xhci.h

On 08/21/2013 05:12 AM, Vivek Gautam wrote:
> This adds stack layer for eXtensible Host Controller Interface
> which facilitates use of USB 3.0 in host mode.
>
> Adapting xHCI host controller driver in linux-kernel
> by Sarah Sharp to needs in u-boot.
>
> This adds the basic xHCI host controller driver with bare minimum
> features:
> - Control/Bulk transfer support has been added with required
>   infrastructure for necessary xHC data structures.
> - Stream protocol hasn't been supported yet.
> - No support for quirky devices has been added.
>
> Signed-off-by: Vikas C Sajjan <vikas.sajjan@samsung.com>
> Signed-off-by: Julius Werner <jwerner@chromium.org>
> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
> Cc: Simon Glass <sjg@chromium.org>
> Cc: Minkyu Kang <mk7.kang@samsung.com>
> Cc: Dan Murphy <dmurphy@ti.com>
> Cc: Marek Vasut <marex@denx.de>
> ---
>  common/usb.c                 |   27 +-
>  drivers/usb/host/Makefile    |    3 +
>  drivers/usb/host/xhci-mem.c  |  731 ++++++++++++++++++++++++
>  drivers/usb/host/xhci-ring.c |  950 +++++++++++++++++++++++++++++++
>  drivers/usb/host/xhci.c      | 1040 ++++++++++++++++++++++++++++++++++
>  drivers/usb/host/xhci.h      | 1280 ++++++++++++++++++++++++++++++++++++++++++
>  include/usb.h                |    9 +-
>  7 files changed, 4037 insertions(+), 3 deletions(-)
>  create mode 100644 drivers/usb/host/xhci-mem.c
>  create mode 100644 drivers/usb/host/xhci-ring.c
>  create mode 100644 drivers/usb/host/xhci.c
>  create mode 100644 drivers/usb/host/xhci.h
>
> diff --git a/common/usb.c b/common/usb.c
> index c97f522..e7800fa 100644
> --- a/common/usb.c
> +++ b/common/usb.c
> @@ -855,6 +855,16 @@ void usb_free_device(void)
>  }
>  
>  /*
> + * XHCI issues Enable Slot command and thereafter
> + * allocates device contexts. Provide a weak alias
> + * function for the purpose, so that XHCI overrides it
> + * and EHCI/OHCI just work out of the box.
> + */
> +__weak int usb_alloc_device(struct usb_device *udev)
> +{
> +	return 0;
> +}
> +/*
>   * By the time we get here, the device has gotten a new device ID
>   * and is in the default state. We need to identify the thing and
>   * get the ball rolling..
> @@ -867,6 +877,17 @@ int usb_new_device(struct usb_device *dev)
>  	int tmp;
>  	ALLOC_CACHE_ALIGN_BUFFER(unsigned char, tmpbuf, USB_BUFSIZ);
>  
> +	/*
> +	 * Allocate usb 3.0 device context.
> +	 * USB 3.0 (xHCI) protocol tries to allocate device slot
> +	 * and related data structures first. This call does that.
> +	 * Refer to sec 4.3.2 in xHCI spec rev1.0
> +	 */
> +	if (usb_alloc_device(dev)) {
> +		printf("Cannot allocate device context to get SLOT_ID\n");
> +		return -1;
> +	}
> +
>  	/* We still haven't set the Address yet */
>  	addr = dev->devnum;
>  	dev->devnum = 0;
> @@ -897,7 +918,7 @@ int usb_new_device(struct usb_device *dev)
>  	 * http://sourceforge.net/mailarchive/forum.php?
>  	 * thread_id=5729457&forum_id=5398
>  	 */
> -	struct usb_device_descriptor *desc;
> +	__maybe_unused struct usb_device_descriptor *desc;
>  	int port = -1;
>  	struct usb_device *parent = dev->parent;
>  	unsigned short portstatus;
> @@ -914,6 +935,7 @@ int usb_new_device(struct usb_device *dev)
>  	dev->epmaxpacketin[0] = 64;
>  	dev->epmaxpacketout[0] = 64;
>  
> +#ifndef CONFIG_USB_XHCI

Add a comment why we cannot get the descriptor on xHCI.

>  	err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, desc, 64);
>  	if (err < 0) {
>  		debug("usb_new_device: usb_get_descriptor() failed\n");
> @@ -926,11 +948,12 @@ int usb_new_device(struct usb_device *dev)
>  	 * to differentiate between HUB and DEVICE.
>  	 */
>  	dev->descriptor.bDeviceClass = desc->bDeviceClass;
> +#endif
>  
> -	/* find the port number we're at */
>  	if (parent) {
>  		int j;
>  
> +		/* find the port number we're at */
>  		for (j = 0; j < parent->maxchild; j++) {
>  			if (parent->children[j] == dev) {
>  				port = j;
> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> index ff6c80e..6bd6c86 100644
> --- a/drivers/usb/host/Makefile
> +++ b/drivers/usb/host/Makefile
> @@ -42,6 +42,9 @@ COBJS-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o
>  COBJS-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
>  COBJS-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
>  
> +# xhci
> +COBJS-$(CONFIG_USB_XHCI) += xhci.o xhci-mem.o xhci-ring.o
> +
>  COBJS	:= $(COBJS-y)
>  SRCS	:= $(COBJS:.o=.c)
>  OBJS	:= $(addprefix $(obj),$(COBJS))
> diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
> new file mode 100644
> index 0000000..709ef7e
> --- /dev/null
> +++ b/drivers/usb/host/xhci-mem.c
> @@ -0,0 +1,731 @@
> +/*
> + * USB HOST XHCI Controller stack
> + *
> + * Copyright (C) 2013 Samsung Electronics Co.Ltd
> + *	Vivek Gautam <gautam.vivek@samsung.com>
> + *	Vikas Sajjan <vikas.sajjan@samsung.com>
> + *
> + * Based on xHCI host controller driver in linux-kernel
> + * by Sarah Sharp.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301 USA
> + */
> +

Needs new SPDX license.

* SPDX-License-Identifier:	GPL-2.0+


> +#include <common.h>
> +#include <asm/byteorder.h>
> +#include <usb.h>
> +#include <asm/io.h>

Move this to the xhci.h as it is needed there for the write/read interfaces

> +#include <malloc.h>
> +#include <asm/cache.h>
> +#include <asm-generic/errno.h>
> +
> +#include "xhci.h"
> +
> +#define CACHELINE_SIZE		CONFIG_SYS_CACHELINE_SIZE
> +/**
> + * flushes the address passed till the length
> + *
> + * @param addr	pointer to memory region to be flushed
> + * @param len	the length of the cache line to be flushed
> + * @return none
> + */
> +void xhci_flush_cache(uint32_t addr, u32 len)
> +{
> +	BUG_ON((void *)addr == NULL || len == 0);
> +
> +	flush_dcache_range(addr & ~(CACHELINE_SIZE - 1),
> +				ALIGN(addr + len, CACHELINE_SIZE));
> +}
> +
> +/**
> + * invalidates the address passed till the length
> + *
> + * @param addr	pointer to memory region to be invalidates
> + * @param len	the length of the cache line to be invalidated
> + * @return none
> + */
> +void xhci_inval_cache(uint32_t addr, u32 len)
> +{
> +	BUG_ON((void *)addr == NULL || len == 0);
> +
> +	invalidate_dcache_range(addr & ~(CACHELINE_SIZE - 1),
> +				ALIGN(addr + len, CACHELINE_SIZE));
> +}
> +
> +
> +/**
> + * frees the "segment" pointer passed
> + *
> + * @param ptr	pointer to "segement" to be freed
> + * @return none
> + */
> +static void xhci_segment_free(struct xhci_segment *seg)
> +{
> +	free(seg->trbs);
> +	seg->trbs = NULL;
> +
> +	free(seg);

Do you want to make seg = NULL as well?

> +}
> +
> +/**
> + * frees the "ring" pointer passed
> + *
> + * @param ptr	pointer to "ring" to be freed
> + * @return none
> + */
> +static void xhci_ring_free(struct xhci_ring *ring)
> +{
> +	struct xhci_segment *seg;
> +	struct xhci_segment *first_seg;
> +
> +	BUG_ON(!ring);
> +
> +	first_seg = ring->first_seg;
> +	seg = first_seg->next;
> +	while (seg != first_seg) {
> +		struct xhci_segment *next = seg->next;
> +		xhci_segment_free(seg);
> +		seg = next;
> +	}
> +	xhci_segment_free(first_seg);
> +
> +	free(ring);

Do you want to make ring = NULL?

> +}
> +
> +/**
> + * frees the "xhci_container_ctx" pointer passed
> + *
> + * @param ptr	pointer to "xhci_container_ctx" to be freed
> + * @return none
> + */
> +static void xhci_free_container_ctx(struct xhci_container_ctx *ctx)
> +{
> +	free(ctx->bytes);
> +	free(ctx);
> +}
> +
> +/**
> + * frees the virtual devices for "xhci_ctrl" pointer passed
> + *
> + * @param ptr	pointer to "xhci_ctrl" whose virtual devices are to be freed
> + * @return none
> + */
> +static void xhci_free_virt_devices(struct xhci_ctrl *ctrl)
> +{
> +	int i;
> +	int slot_id;
> +	struct xhci_virt_device *virt_dev;
> +
> +	/*
> +	 * refactored here to loop through all virt_dev
> +	 * Slot ID 0 is reserved
> +	 */
> +	for (slot_id = 0; slot_id < MAX_HC_SLOTS; slot_id++) {
> +		virt_dev = ctrl->devs[slot_id];
> +		if (!virt_dev)
> +			continue;
> +
> +		ctrl->dcbaa->dev_context_ptrs[slot_id] = 0;
> +
> +		for (i = 0; i < 31; ++i)
> +			if (virt_dev->eps[i].ring)
> +				xhci_ring_free(virt_dev->eps[i].ring);
> +
> +		if (virt_dev->in_ctx)
> +			xhci_free_container_ctx(virt_dev->in_ctx);
> +		if (virt_dev->out_ctx)
> +			xhci_free_container_ctx(virt_dev->out_ctx);
> +
> +		free(virt_dev);
> +		/* make sure we are pointing to NULL */
> +		ctrl->devs[slot_id] = NULL;
> +	}
> +}
> +
> +/**
> + * frees all the memory allocated
> + *
> + * @param ptr	pointer to "xhci_ctrl" to be cleaned up
> + * @return none
> + */
> +void xhci_cleanup(struct xhci_ctrl *ctrl)
> +{
> +	xhci_ring_free(ctrl->event_ring);
> +	xhci_ring_free(ctrl->cmd_ring);
> +	xhci_free_virt_devices(ctrl);
> +	free(ctrl->erst.entries);
> +	free(ctrl->dcbaa);
> +	memset(ctrl, '\0', sizeof(struct xhci_ctrl));
> +}
> +
> +/**
> + * Malloc the aligned memory
> + *
> + * @param size	size of memory to be allocated
> + * @return allocates the memory and returns the aligned pointer
> + */
> +static void *xhci_malloc(unsigned int size)
> +{
> +	void *ptr;
> +	size_t cacheline_size = max(XHCI_ALIGNMENT, CACHELINE_SIZE);
> +
> +	ptr = memalign(cacheline_size, ALIGN(size, cacheline_size));
> +	BUG_ON(!ptr);
> +	memset(ptr, '\0', size);
> +
> +	xhci_flush_cache((uint32_t)ptr, size);
> +
> +	return ptr;
> +}
> +
> +/**
> + * Make the prev segment point to the next segment.
> + * Change the last TRB in the prev segment to be a Link TRB which points to the
> + * address of the next segment.  The caller needs to set any Link TRB
> + * related flags, such as End TRB, Toggle Cycle, and no snoop.
> + *
> + * @param prev	pointer to the previous segment
> + * @param next	pointer to the next segment
> + * @param link_trbs	flag to indicate whether to link the trbs or NOT
> + * @return none
> + */
> +static void xhci_link_segments(struct xhci_segment *prev,
> +				struct xhci_segment *next, bool link_trbs)
> +{
> +	u32 val;
> +	u64 val_64 = 0;
> +
> +	if (!prev || !next)
> +		return;
> +	prev->next = next;
> +	if (link_trbs) {
> +		val_64 = (uintptr_t)next->trbs;
> +		prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr = val_64;
> +
> +		/*
> +		 * Set the last TRB in the segment to
> +		 * have a TRB type ID of Link TRB
> +		 */
> +		val = le32_to_cpu(prev->trbs[TRBS_PER_SEGMENT-1].link.control);
> +		val &= ~TRB_TYPE_BITMASK;
> +		val |= (TRB_LINK << TRB_TYPE_SHIFT);
> +
> +		prev->trbs[TRBS_PER_SEGMENT-1].link.control = cpu_to_le32(val);
> +	}
> +}
> +
> +/**
> + * Initialises the Ring's enqueue,dequeue,enq_seg pointers
> + *
> + * @param ring	pointer to the RING to be intialised
> + * @return none
> + */
> +static void xhci_initialize_ring_info(struct xhci_ring *ring)
> +{
> +	/*
> +	 * The ring is empty, so the enqueue pointer == dequeue pointer
> +	 */
> +	ring->enqueue = ring->first_seg->trbs;
> +	ring->enq_seg = ring->first_seg;
> +	ring->dequeue = ring->enqueue;
> +	ring->deq_seg = ring->first_seg;
> +
> +	/*
> +	 * The ring is initialized to 0. The producer must write 1 to the
> +	 * cycle bit to handover ownership of the TRB, so PCS = 1.
> +	 * The consumer must compare CCS to the cycle bit to
> +	 * check ownership, so CCS = 1.
> +	 */
> +	ring->cycle_state = 1;
> +}
> +
> +/**
> + * Allocates a generic ring segment from the ring pool, sets the dma address,
> + * initializes the segment to zero, and sets the private next pointer to NULL.
> + * Section 4.11.1.1:
> + * "All components of all Command and Transfer TRBs shall be initialized to '0'"
> + *
> + * @param	none
> + * @return pointer to the newly allocated SEGMENT
> + */
> +static struct xhci_segment *xhci_segment_alloc(void)
> +{
> +	struct xhci_segment *seg;
> +
> +	seg = (struct xhci_segment *)malloc(sizeof(struct xhci_segment));
> +	BUG_ON(!seg);
> +
> +	seg->trbs = (union xhci_trb *)xhci_malloc(SEGMENT_SIZE);
> +
> +	seg->next = NULL;
> +
> +	return seg;
> +}
> +
> +/**
> + * Create a new ring with zero or more segments.
> + * TODO: current code only uses one-time-allocated single-segment rings
> + * of 1KB anyway, so we might as well get rid of all the segment and
> + * linking code (and maybe increase the size a bit, e.g. 4KB).
> + *
> + *
> + * Link each segment together into a ring.
> + * Set the end flag and the cycle toggle bit on the last segment.
> + * See section 4.9.2 and figures 15 and 16 of XHCI spec rev1.0.
> + *
> + * @param num_segs	number of segments in the ring
> + * @param link_trbs	flag to indicate whether to link the trbs or NOT
> + * @return pointer to the newly created RING
> + */
> +struct xhci_ring *xhci_ring_alloc(unsigned int num_segs, bool link_trbs)
> +{
> +	struct xhci_ring *ring;
> +	struct xhci_segment *prev;
> +
> +	ring = (struct xhci_ring *)malloc(sizeof(struct xhci_ring));
> +	BUG_ON(!ring);
> +
> +	if (num_segs == 0)
> +		return ring;
> +
> +	ring->first_seg = xhci_segment_alloc();
> +	BUG_ON(!ring->first_seg);
> +
> +	num_segs--;
> +
> +	prev = ring->first_seg;
> +	while (num_segs > 0) {
> +		struct xhci_segment *next;
> +
> +		next = xhci_segment_alloc();
> +		BUG_ON(!next);
> +
> +		xhci_link_segments(prev, next, link_trbs);
> +
> +		prev = next;
> +		num_segs--;
> +	}
> +	xhci_link_segments(prev, ring->first_seg, link_trbs);
> +	if (link_trbs) {
> +		/* See section 4.9.2.1 and 6.4.4.1 */
> +		prev->trbs[TRBS_PER_SEGMENT-1].link.control |=
> +					cpu_to_le32(LINK_TOGGLE);
> +	}
> +	xhci_initialize_ring_info(ring);
> +
> +	return ring;
> +}
> +
> +/**
> + * Allocates the Container context
> + *
> + * @param ctrl	Host controller data structure
> + * @param type type of XHCI Container Context
> + * @return NULL if failed else pointer to the context on success
> + */
> +static struct xhci_container_ctx
> +		*xhci_alloc_container_ctx(struct xhci_ctrl *ctrl, int type)
> +{
> +	struct xhci_container_ctx *ctx;
> +
> +	ctx = (struct xhci_container_ctx *)
> +		malloc(sizeof(struct xhci_container_ctx));
> +	BUG_ON(!ctx);
> +
> +	BUG_ON((type != XHCI_CTX_TYPE_DEVICE) && (type != XHCI_CTX_TYPE_INPUT));
> +	ctx->type = type;
> +	ctx->size = (MAX_EP_CTX_NUM + 1) *
> +			CTX_SIZE(readl(&ctrl->hccr->cr_hccparams));
> +	if (type == XHCI_CTX_TYPE_INPUT)
> +		ctx->size += CTX_SIZE(readl(&ctrl->hccr->cr_hccparams));
> +
> +	ctx->bytes = (u8 *)xhci_malloc(ctx->size);
> +
> +	return ctx;
> +}
> +
> +/**
> + * Allocating virtual device
> + *
> + * @param udev	pointer to USB deivce structure
> + * @return 0 on success else -1 on failure
> + */
> +int xhci_alloc_virt_device(struct usb_device *udev)
> +{
> +	u64 byte_64 = 0;
> +	unsigned int slot_id = udev->slot_id;
> +	struct xhci_virt_device *virt_dev;
> +	struct xhci_ctrl *ctrl = udev->controller;
> +
> +	/* Slot ID 0 is reserved */
> +	if (ctrl->devs[slot_id]) {
> +		printf("Virt dev for slot[%d] already allocated\n", slot_id);
> +		return -1;

Global comment if you are including errno can't we make the errors returned mean something other then -1?
Or I fail to see why errno was included.

> +	}
> +
> +	ctrl->devs[slot_id] = (struct xhci_virt_device *)
> +					malloc(sizeof(struct xhci_virt_device));
> +
> +	if (!ctrl->devs[slot_id]) {
> +		printf("Failed to allocate virtual device\n");

Should use puts when no arguments.

> +		return -1;
> +	}
> +
> +	memset(ctrl->devs[slot_id], 0, sizeof(struct xhci_virt_device));
> +	virt_dev = ctrl->devs[slot_id];
> +
> +	/* Allocate the (output) device context that will be used in the HC. */
> +	virt_dev->out_ctx = xhci_alloc_container_ctx(ctrl,
> +					XHCI_CTX_TYPE_DEVICE);
> +	if (!virt_dev->out_ctx) {
> +		printf("Failed to allocate out context for virt dev\n");

Should use puts when no arguments.

> +		return -1;
> +	}
> +
> +	/* Allocate the (input) device context for address device command */
> +	virt_dev->in_ctx = xhci_alloc_container_ctx(ctrl,
> +					XHCI_CTX_TYPE_INPUT);
> +	if (!virt_dev->in_ctx) {
> +		printf("Failed to allocate in context for virt dev\n");

Should use puts when no arguments.

> +		return -1;
> +	}
> +
> +	/* Allocate endpoint 0 ring */
> +	virt_dev->eps[0].ring = xhci_ring_alloc(1, true);
> +
> +	byte_64 = (uintptr_t)(virt_dev->out_ctx->bytes);
> +
> +	/* Point to output device context in dcbaa. */
> +	ctrl->dcbaa->dev_context_ptrs[slot_id] = byte_64;
> +
> +	xhci_flush_cache((uint32_t)&ctrl->dcbaa->dev_context_ptrs[slot_id],
> +							sizeof(__le64));
> +	return 0;
> +}
> +
> +/**
> + * Allocates the necessary data structures
> + * for XHCI host controller
> + *
> + * @param ctrl	Host controller data structure
> + * @param hccr	pointer to HOST Controller Control Registers
> + * @param hcor	pointer to HOST Controller Operational Registers
> + * @return 0 if successful else -1 on failure
> + */
> +int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr,
> +					struct xhci_hcor *hcor)
> +{
> +	uint64_t val_64;
> +	uint64_t trb_64;
> +	uint32_t val;
> +	unsigned long deq;
> +	int i;
> +	struct xhci_segment *seg;
> +
> +	/* DCBAA initialization */
> +	ctrl->dcbaa = (struct xhci_device_context_array *)
> +			xhci_malloc(sizeof(struct xhci_device_context_array));
> +	if (ctrl->dcbaa == NULL) {
> +		printf("unable to allocate DCBA\n");
> +		return -1;
> +	}
> +
> +	val_64 = (uintptr_t)ctrl->dcbaa;
> +	/* Set the pointer in DCBAA register */
> +	xhci_writeq(&hcor->or_dcbaap, val_64);
> +
> +	/* Command ring control pointer register initialization */
> +	ctrl->cmd_ring = xhci_ring_alloc(1, true);
> +
> +	/* Set the address in the Command Ring Control register */
> +	trb_64 = (uintptr_t)ctrl->cmd_ring->first_seg->trbs;
> +	val_64 = xhci_readq(&hcor->or_crcr);
> +	val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
> +		(trb_64 & (u64) ~CMD_RING_RSVD_BITS) |
> +		ctrl->cmd_ring->cycle_state;
> +	xhci_writeq(&hcor->or_crcr, val_64);
> +
> +	/* write the address of db register */
> +	val = xhci_readl(&hccr->cr_dboff);
> +	val &= DBOFF_MASK;
> +	ctrl->dba = (struct xhci_doorbell_array *)((char *)hccr + val);
> +
> +	/* write the address of runtime register */
> +	val = xhci_readl(&hccr->cr_rtsoff);
> +	val &= RTSOFF_MASK;
> +	ctrl->run_regs = (struct xhci_run_regs *)((char *)hccr + val);
> +
> +	/* writting the address of ir_set structure */
> +	ctrl->ir_set = &ctrl->run_regs->ir_set[0];
> +
> +	/* Event ring does not maintain link TRB */
> +	ctrl->event_ring = xhci_ring_alloc(ERST_NUM_SEGS, false);
> +	ctrl->erst.entries = (struct xhci_erst_entry *)
> +		xhci_malloc(sizeof(struct xhci_erst_entry) * ERST_NUM_SEGS);
> +
> +	ctrl->erst.num_entries = ERST_NUM_SEGS;
> +
> +	for (val = 0, seg = ctrl->event_ring->first_seg;
> +			val < ERST_NUM_SEGS;
> +			val++) {
> +		trb_64 = 0;
> +		trb_64 = (uintptr_t)seg->trbs;
> +		struct xhci_erst_entry *entry = &ctrl->erst.entries[val];
> +		xhci_writeq(&entry->seg_addr, trb_64);
> +		entry->seg_size = cpu_to_le32(TRBS_PER_SEGMENT);
> +		entry->rsvd = 0;
> +		seg = seg->next;
> +	}
> +	xhci_flush_cache((uint32_t)ctrl->erst.entries,
> +			ERST_NUM_SEGS * sizeof(struct xhci_erst_entry));
> +
> +	deq = (unsigned long)ctrl->event_ring->dequeue;
> +
> +	/* Update HC event ring dequeue pointer */
> +	xhci_writeq(&ctrl->ir_set->erst_dequeue,
> +				(u64)deq & (u64)~ERST_PTR_MASK);
> +
> +	/* set ERST count with the number of entries in the segment table */
> +	val = xhci_readl(&ctrl->ir_set->erst_size);
> +	val &= ERST_SIZE_MASK;
> +	val |= ERST_NUM_SEGS;
> +	xhci_writel(&ctrl->ir_set->erst_size, val);
> +
> +	/* this is the event ring segment table pointer */
> +	val_64 = xhci_readq(&ctrl->ir_set->erst_base);
> +	val_64 &= ERST_PTR_MASK;
> +	val_64 |= ((u32)(ctrl->erst.entries) & ~ERST_PTR_MASK);
> +
> +	xhci_writeq(&ctrl->ir_set->erst_base, val_64);
> +
> +	/* initializing the virtual devices to NULL */
> +	for (i = 0; i < MAX_HC_SLOTS; ++i)
> +		ctrl->devs[i] = NULL;
> +
> +	/*
> +	 * Just Zero'ing this register completely,
> +	 * or some spurious Device Notification Events
> +	 * might screw things here.
> +	 */
> +	xhci_writel(&hcor->or_dnctrl, 0x0);
> +
> +	return 0;
> +}
> +
> +/**
> + * Give the input control context for the passed container context
> + *
> + * @param ctx	pointer to the context
> + * @return pointer to the Input control context data
> + */
> +struct xhci_input_control_ctx
> +		*xhci_get_input_control_ctx(struct xhci_container_ctx *ctx)
> +{
> +	BUG_ON(ctx->type != XHCI_CTX_TYPE_INPUT);
> +	return (struct xhci_input_control_ctx *)ctx->bytes;
> +}
> +
> +/**
> + * Give the slot context for the passed container context
> + *
> + * @param ctrl	Host controller data structure
> + * @param ctx	pointer to the context
> + * @return pointer to the slot control context data
> + */
> +struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_ctrl *ctrl,
> +				struct xhci_container_ctx *ctx)
> +{
> +	if (ctx->type == XHCI_CTX_TYPE_DEVICE)
> +		return (struct xhci_slot_ctx *)ctx->bytes;
> +
> +	return (struct xhci_slot_ctx *)
> +		(ctx->bytes + CTX_SIZE(readl(&ctrl->hccr->cr_hccparams)));
> +}
> +
> +/**
> + * Gets the EP context from based on the ep_index
> + *
> + * @param ctrl	Host controller data structure
> + * @param ctx	context container
> + * @param ep_index	index of the endpoint
> + * @return pointer to the End point context
> + */
> +struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_ctrl *ctrl,
> +				    struct xhci_container_ctx *ctx,
> +				    unsigned int ep_index)
> +{
> +	/* increment ep index by offset of start of ep ctx array */
> +	ep_index++;
> +	if (ctx->type == XHCI_CTX_TYPE_INPUT)
> +		ep_index++;
> +
> +	return (struct xhci_ep_ctx *)
> +		(ctx->bytes +
> +		(ep_index * CTX_SIZE(readl(&ctrl->hccr->cr_hccparams))));
> +}
> +
> +/**
> + * Copy output xhci_ep_ctx to the input xhci_ep_ctx copy.
> + * Useful when you want to change one particular aspect of the endpoint
> + * and then issue a configure endpoint command.
> + *
> + * @param ctrl	Host controller data structure
> + * @param in_ctx contains the input context
> + * @param out_ctx contains the input context
> + * @param ep_index index of the end point
> + * @return none
> + */
> +void xhci_endpoint_copy(struct xhci_ctrl *ctrl,
> +			struct xhci_container_ctx *in_ctx,
> +			struct xhci_container_ctx *out_ctx,
> +			unsigned int ep_index)
> +{
> +	struct xhci_ep_ctx *out_ep_ctx;
> +	struct xhci_ep_ctx *in_ep_ctx;
> +
> +	out_ep_ctx = xhci_get_ep_ctx(ctrl, out_ctx, ep_index);
> +	in_ep_ctx = xhci_get_ep_ctx(ctrl, in_ctx, ep_index);
> +
> +	in_ep_ctx->ep_info = out_ep_ctx->ep_info;
> +	in_ep_ctx->ep_info2 = out_ep_ctx->ep_info2;
> +	in_ep_ctx->deq = out_ep_ctx->deq;
> +	in_ep_ctx->tx_info = out_ep_ctx->tx_info;
> +}
> +
> +/**
> + * Copy output xhci_slot_ctx to the input xhci_slot_ctx.
> + * Useful when you want to change one particular aspect of the endpoint
> + * and then issue a configure endpoint command.
> + * Only the context entries field matters, but
> + * we'll copy the whole thing anyway.
> + *
> + * @param ctrl	Host controller data structure
> + * @param in_ctx contains the inpout context
> + * @param out_ctx contains the inpout context
> + * @return none
> + */
> +void xhci_slot_copy(struct xhci_ctrl *ctrl, struct xhci_container_ctx *in_ctx,
> +					struct xhci_container_ctx *out_ctx)
> +{
> +	struct xhci_slot_ctx *in_slot_ctx;
> +	struct xhci_slot_ctx *out_slot_ctx;
> +
> +	in_slot_ctx = xhci_get_slot_ctx(ctrl, in_ctx);
> +	out_slot_ctx = xhci_get_slot_ctx(ctrl, out_ctx);
> +
> +	in_slot_ctx->dev_info = out_slot_ctx->dev_info;
> +	in_slot_ctx->dev_info2 = out_slot_ctx->dev_info2;
> +	in_slot_ctx->tt_info = out_slot_ctx->tt_info;
> +	in_slot_ctx->dev_state = out_slot_ctx->dev_state;
> +}
> +
> +/**
> + * Setup an xHCI virtual device for a Set Address command
> + *
> + * @param udev pointer to the Device Data Structure
> + * @return returns negative value on failure else 0 on success
> + */
> +void xhci_setup_addressable_virt_dev(struct usb_device *udev)
> +{
> +	struct usb_device *hop = udev;
> +	struct xhci_virt_device *virt_dev;
> +	struct xhci_ep_ctx *ep0_ctx;
> +	struct xhci_slot_ctx *slot_ctx;
> +	u32 port_num = 0;
> +	u64 trb_64 = 0;
> +	struct xhci_ctrl *ctrl = udev->controller;
> +
> +	virt_dev = ctrl->devs[udev->slot_id];
> +
> +	BUG_ON(!virt_dev);
> +
> +	/* Extract the EP0 and Slot Ctrl */
> +	ep0_ctx = xhci_get_ep_ctx(ctrl, virt_dev->in_ctx, 0);
> +	slot_ctx = xhci_get_slot_ctx(ctrl, virt_dev->in_ctx);
> +
> +	/* Only the control endpoint is valid - one endpoint context */
> +	slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | 0);
> +
> +	switch (udev->speed) {
> +	case USB_SPEED_SUPER:
> +		slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_SS);
> +		break;
> +	case USB_SPEED_HIGH:
> +		slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_HS);
> +		break;
> +	case USB_SPEED_FULL:
> +		slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_FS);
> +		break;
> +	case USB_SPEED_LOW:
> +		slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_LS);
> +		break;
> +	default:
> +		/* Speed was set earlier, this shouldn't happen. */
> +		BUG();
> +	}
> +
> +	/* Extract the root hub port number */
> +	if (hop->parent)
> +		while (hop->parent->parent)
> +			hop = hop->parent;
> +	port_num = hop->portnr;
> +	debug("port_num = %d\n", port_num);
> +
> +	slot_ctx->dev_info2 |=
> +			cpu_to_le32(((port_num & ROOT_HUB_PORT_MASK) <<
> +				ROOT_HUB_PORT_SHIFT));
> +
> +	/* Step 4 - ring already allocated */
> +	/* Step 5 */
> +	ep0_ctx->ep_info2 = cpu_to_le32(CTRL_EP << EP_TYPE_SHIFT);
> +	debug("SPEED = %d\n", udev->speed);
> +
> +	switch (udev->speed) {
> +	case USB_SPEED_SUPER:
> +		ep0_ctx->ep_info2 |= cpu_to_le32(((512 & MAX_PACKET_MASK) <<
> +					MAX_PACKET_SHIFT));
> +		debug("Setting Packet size = 512bytes\n");
> +		break;
> +	case USB_SPEED_HIGH:
> +	/* USB core guesses at a 64-byte max packet first for FS devices */
> +	case USB_SPEED_FULL:
> +		ep0_ctx->ep_info2 |= cpu_to_le32(((64 & MAX_PACKET_MASK) <<
> +					MAX_PACKET_SHIFT));
> +		debug("Setting Packet size = 64bytes\n");
> +		break;
> +	case USB_SPEED_LOW:
> +		ep0_ctx->ep_info2 |= cpu_to_le32(((8 & MAX_PACKET_MASK) <<
> +					MAX_PACKET_SHIFT));
> +		debug("Setting Packet size = 8bytes\n");
> +		break;
> +	default:
> +		/* New speed? */
> +		BUG();
> +	}
> +
> +	/* EP 0 can handle "burst" sizes of 1, so Max Burst Size field is 0 */
> +	ep0_ctx->ep_info2 |=
> +			cpu_to_le32(((0 & MAX_BURST_MASK) << MAX_BURST_SHIFT) |
> +			((3 & ERROR_COUNT_MASK) << ERROR_COUNT_SHIFT));
> +
> +	trb_64 = (uintptr_t)virt_dev->eps[0].ring->first_seg->trbs;
> +	ep0_ctx->deq = cpu_to_le64(trb_64 | virt_dev->eps[0].ring->cycle_state);
> +
> +	/* Steps 7 and 8 were done in xhci_alloc_virt_device() */
> +
> +	xhci_flush_cache((uint32_t)ep0_ctx, sizeof(struct xhci_ep_ctx));
> +	xhci_flush_cache((uint32_t)slot_ctx, sizeof(struct xhci_slot_ctx));
> +}
> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
> new file mode 100644
> index 0000000..8340850
> --- /dev/null
> +++ b/drivers/usb/host/xhci-ring.c
> @@ -0,0 +1,950 @@
> +/*
> + * USB HOST XHCI Controller stack
> + *
> + * Copyright (C) 2013 Samsung Electronics Co.Ltd
> + *	Vivek Gautam <gautam.vivek@samsung.com>
> + *	Vikas Sajjan <vikas.sajjan@samsung.com>
> + *
> + * Based on xHCI host controller driver in linux-kernel
> + * by Sarah Sharp.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301 USA
> + */



> +
> +#include <common.h>
> +#include <asm/byteorder.h>
> +#include <usb.h>
> +#include <asm/io.h>
> +#include <asm/unaligned.h>
> +#include <asm-generic/errno.h>
> +
> +#include "xhci.h"
> +
> +/**
> + * Is this TRB a link TRB or was the last TRB the last TRB in this event ring
> + * segment?  I.e. would the updated event TRB pointer step off the end of the
> + * event seg ?
> + *
> + * @param ctrl	Host controller data structure
> + * @param ring	pointer to the ring
> + * @param seg	poniter to the segment to which TRB belongs
> + * @param trb	poniter to the ring trb
> + * @return 1 if this TRB a link TRB else 0
> + */
> +static int last_trb(struct xhci_ctrl *ctrl, struct xhci_ring *ring,
> +			struct xhci_segment *seg, union xhci_trb *trb)
> +{
> +	if (ring == ctrl->event_ring)
> +		return trb == &seg->trbs[TRBS_PER_SEGMENT];
> +	else
> +		return TRB_TYPE_LINK_LE32(trb->link.control);
> +}
> +
> +/**
> + * Does this link TRB point to the first segment in a ring,
> + * or was the previous TRB the last TRB on the last segment in the ERST?
> + *
> + * @param ctrl	Host controller data structure
> + * @param ring	pointer to the ring
> + * @param seg	poniter to the segment to which TRB belongs
> + * @param trb	poniter to the ring trb
> + * @return 1 if this TRB is the last TRB on the last segment else 0
> + */
> +static bool last_trb_on_last_seg(struct xhci_ctrl *ctrl,
> +				 struct xhci_ring *ring,
> +				 struct xhci_segment *seg,
> +				 union xhci_trb *trb)
> +{
> +	if (ring == ctrl->event_ring)
> +		return ((trb == &seg->trbs[TRBS_PER_SEGMENT]) &&
> +			(seg->next == ring->first_seg));
> +	else
> +		return le32_to_cpu(trb->link.control) & LINK_TOGGLE;
> +}
> +
> +/**
> + * See Cycle bit rules. SW is the consumer for the event ring only.
> + * Don't make a ring full of link TRBs.  That would be dumb and this would loop.
> + *
> + * If we've just enqueued a TRB that is in the middle of a TD (meaning the
> + * chain bit is set), then set the chain bit in all the following link TRBs.
> + * If we've enqueued the last TRB in a TD, make sure the following link TRBs
> + * have their chain bit cleared (so that each Link TRB is a separate TD).
> + *
> + * Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit
> + * set, but other sections talk about dealing with the chain bit set.  This was
> + * fixed in the 0.96 specification errata, but we have to assume that all 0.95
> + * xHCI hardware can't handle the chain bit being cleared on a link TRB.
> + *
> + * @param ctrl	Host controller data structure
> + * @param ring	pointer to the ring
> + * @param more_trbs_coming	flag to indicate whether more trbs
> + *				are expected or NOT.
> + *				Will you enqueue more TRBs before calling
> + *				prepare_ring()?
> + * @return none
> + */
> +static void inc_enq(struct xhci_ctrl *ctrl, struct xhci_ring *ring,
> +						bool more_trbs_coming)
> +{
> +	u32 chain;
> +	union xhci_trb *next;
> +
> +	chain = le32_to_cpu(ring->enqueue->generic.field[3]) & TRB_CHAIN;
> +	next = ++(ring->enqueue);
> +
> +	/*
> +	 * Update the dequeue pointer further if that was a link TRB or we're at
> +	 * the end of an event ring segment (which doesn't have link TRBS)
> +	 */
> +	while (last_trb(ctrl, ring, ring->enq_seg, next)) {
> +		if (ring != ctrl->event_ring) {
> +			/*
> +			 * If the caller doesn't plan on enqueueing more
> +			 * TDs before ringing the doorbell, then we
> +			 * don't want to give the link TRB to the
> +			 * hardware just yet.  We'll give the link TRB
> +			 * back in prepare_ring() just before we enqueue
> +			 * the TD at the top of the ring.
> +			 */
> +			if (!chain && !more_trbs_coming)
> +				break;
> +
> +			/*
> +			 * If we're not dealing with 0.95 hardware or
> +			 * isoc rings on AMD 0.96 host,
> +			 * carry over the chain bit of the previous TRB
> +			 * (which may mean the chain bit is cleared).
> +			 */
> +			next->link.control &= cpu_to_le32(~TRB_CHAIN);
> +			next->link.control |= cpu_to_le32(chain);
> +
> +			next->link.control ^= cpu_to_le32(TRB_CYCLE);
> +			xhci_flush_cache((uint32_t)next,
> +						sizeof(union xhci_trb));
> +		}
> +		/* Toggle the cycle bit after the last ring segment. */
> +		if (last_trb_on_last_seg(ctrl, ring,
> +					ring->enq_seg, next))
> +			ring->cycle_state = (ring->cycle_state ? 0 : 1);
> +
> +		ring->enq_seg = ring->enq_seg->next;
> +		ring->enqueue = ring->enq_seg->trbs;
> +		next = ring->enqueue;
> +	}
> +}
> +
> +/**
> + * See Cycle bit rules. SW is the consumer for the event ring only.
> + * Don't make a ring full of link TRBs.  That would be dumb and this would loop.
> + *
> + * @param ctrl	Host controller data structure
> + * @param ring	Ring whose Dequeue TRB pointer needs to be incremented.
> + * return none
> + */
> +static void inc_deq(struct xhci_ctrl *ctrl, struct xhci_ring *ring)
> +{
> +	do {
> +		/*
> +		 * Update the dequeue pointer further if that was a link TRB or
> +		 * we're at the end of an event ring segment (which doesn't have
> +		 * link TRBS)
> +		 */
> +		if (last_trb(ctrl, ring, ring->deq_seg, ring->dequeue)) {
> +			if (ring == ctrl->event_ring &&
> +					last_trb_on_last_seg(ctrl, ring,
> +						ring->deq_seg, ring->dequeue)) {
> +				ring->cycle_state = (ring->cycle_state ? 0 : 1);
> +			}
> +			ring->deq_seg = ring->deq_seg->next;
> +			ring->dequeue = ring->deq_seg->trbs;
> +		} else {
> +			ring->dequeue++;
> +		}
> +	} while (last_trb(ctrl, ring, ring->deq_seg, ring->dequeue));
> +}
> +
> +/**
> + * Generic function for queueing a TRB on a ring.
> + * The caller must have checked to make sure there's room on the ring.
> + *
> + * @param	more_trbs_coming:   Will you enqueue more TRBs before calling
> + *				prepare_ring()?
> + * @param ctrl	Host controller data structure
> + * @param ring	pointer to the ring
> + * @param more_trbs_coming	flag to indicate whether more trbs
> + * @param trb_fields	pointer to trb field array containing TRB contents
> + * @return pointer to the enqueued trb
> + */
> +static struct xhci_generic_trb *queue_trb(struct xhci_ctrl *ctrl,
> +					  struct xhci_ring *ring,
> +					  bool more_trbs_coming,
> +					  unsigned int *trb_fields)
> +{
> +	struct xhci_generic_trb *trb;
> +	int i;
> +
> +	trb = &ring->enqueue->generic;
> +
> +	for (i = 0; i < 4; i++)
> +		trb->field[i] = cpu_to_le32(trb_fields[i]);
> +
> +	xhci_flush_cache((uint32_t)trb, sizeof(struct xhci_generic_trb));
> +
> +	inc_enq(ctrl, ring, more_trbs_coming);
> +
> +	return trb;
> +}
> +
> +/**
> + * Does various checks on the endpoint ring, and makes it ready
> + * to queue num_trbs.
> + *
> + * @param ctrl		Host controller data structure
> + * @param ep_ring	pointer to the EP Transfer Ring
> + * @param ep_state	State of the End Point
> + * @return error code in case of invalid ep_state, 0 on success
> + */
> +static int prepare_ring(struct xhci_ctrl *ctrl, struct xhci_ring *ep_ring,
> +							u32 ep_state)
> +{
> +	union xhci_trb *next = ep_ring->enqueue;
> +
> +	/* Make sure the endpoint has been added to xHC schedule */
> +	switch (ep_state) {
> +	case EP_STATE_DISABLED:
> +		/*
> +		 * USB core changed config/interfaces without notifying us,
> +		 * or hardware is reporting the wrong state.
> +		 */
> +		printf("WARN urb submitted to disabled ep\n");
> +		return -ENOENT;
> +	case EP_STATE_ERROR:
> +		printf("WARN waiting for error on ep to be cleared\n");
> +		return -EINVAL;
> +	case EP_STATE_HALTED:
> +		printf("WARN halted endpoint, queueing URB anyway.\n");
> +	case EP_STATE_STOPPED:
> +	case EP_STATE_RUNNING:
> +		debug("EP STATE RUNNING.\n");
> +		break;
> +	default:
> +		printf("ERROR unknown endpoint state for ep\n");
> +		return -EINVAL;
> +	}
> +
> +	while (last_trb(ctrl, ep_ring, ep_ring->enq_seg, next)) {
> +		/*
> +		 * If we're not dealing with 0.95 hardware or isoc rings
> +		 * on AMD 0.96 host, clear the chain bit.
> +		 */
> +		next->link.control &= cpu_to_le32(~TRB_CHAIN);
> +
> +		next->link.control ^= cpu_to_le32(TRB_CYCLE);
> +
> +		xhci_flush_cache((uint32_t)next, sizeof(union xhci_trb));
> +
> +		/* Toggle the cycle bit after the last ring segment. */
> +		if (last_trb_on_last_seg(ctrl, ep_ring,
> +					ep_ring->enq_seg, next))
> +			ep_ring->cycle_state = (ep_ring->cycle_state ? 0 : 1);
> +		ep_ring->enq_seg = ep_ring->enq_seg->next;
> +		ep_ring->enqueue = ep_ring->enq_seg->trbs;
> +		next = ep_ring->enqueue;
> +	}
> +
> +	return 0;
> +}
> +
> +/**
> + * Generic function for queueing a command TRB on the command ring.
> + * Check to make sure there's room on the command ring for one command TRB.
> + *
> + * @param ctrl		Host controller data structure
> + * @param ptr		Pointer address to write in the first two fields (opt.)
> + * @param slot_id	Slot ID to encode in the flags field (opt.)
> + * @param ep_index	Endpoint index to encode in the flags field (opt.)
> + * @param cmd		Command type to enqueue
> + * @return none
> + */
> +void xhci_queue_command(struct xhci_ctrl *ctrl, u8 *ptr, u32 slot_id,
> +			u32 ep_index, trb_type cmd)
> +{
> +	u32 fields[4];
> +	u64 val_64 = (uintptr_t)ptr;
> +
> +	BUG_ON(prepare_ring(ctrl, ctrl->cmd_ring, EP_STATE_RUNNING));
> +
> +	fields[0] = lower_32_bits(val_64);
> +	fields[1] = upper_32_bits(val_64);
> +	fields[2] = 0;
> +	fields[3] = TRB_TYPE(cmd) | EP_ID_FOR_TRB(ep_index) |
> +		    SLOT_ID_FOR_TRB(slot_id) | ctrl->cmd_ring->cycle_state;
> +
> +	queue_trb(ctrl, ctrl->cmd_ring, false, fields);
> +
> +	/* Ring the command ring doorbell */
> +	xhci_writel(&ctrl->dba->doorbell[0], DB_VALUE_HOST);
> +}
> +
> +/**
> + * The TD size is the number of bytes remaining in the TD (including this TRB),
> + * right shifted by 10.
> + * It must fit in bits 21:17, so it can't be bigger than 31.
> + *
> + * @param remainder	remaining packets to be sent
> + * @return remainder if remainder is less than max else max
> + */
> +static u32 xhci_td_remainder(unsigned int remainder)
> +{
> +	u32 max = (1 << (21 - 17 + 1)) - 1;
> +
> +	if ((remainder >> 10) >= max)
> +		return max << 17;
> +	else
> +		return (remainder >> 10) << 17;
> +}
> +
> +/**
> + * Finds out the remanining packets to be sent
> + *
> + * @param running_total	total size sent so far
> + * @param trb_buff_len	length of the TRB Buffer
> + * @param total_packet_count	total packet count
> + * @param maxpacketsize		max packet size of current pipe
> + * @param num_trbs_left		number of TRBs left to be processed
> + * @return 0 if running_total or trb_buff_len is 0, else remainder
> + */
> +static u32 xhci_v1_0_td_remainder(int running_total,
> +				int trb_buff_len,
> +				unsigned int total_packet_count,
> +				int maxpacketsize,
> +				unsigned int num_trbs_left)
> +{
> +	int packets_transferred;
> +
> +	/* One TRB with a zero-length data packet. */
> +	if (num_trbs_left == 0 || (running_total == 0 && trb_buff_len == 0))
> +		return 0;
> +
> +	/*
> +	 * All the TRB queueing functions don't count the current TRB in
> +	 * running_total.
> +	 */
> +	packets_transferred = (running_total + trb_buff_len) / maxpacketsize;
> +
> +	if ((total_packet_count - packets_transferred) > 31)
> +		return 31 << 17;
> +	return (total_packet_count - packets_transferred) << 17;
> +}
> +
> +/**
> + * Ring the doorbell of the End Point
> + *
> + * @param udev		pointer to the USB device structure
> + * @param ep_index	index of the endpoint
> + * @param start_cycle	cycle flag of the first TRB
> + * @param start_trb	pionter to the first TRB
> + * @return none
> + */
> +static void giveback_first_trb(struct usb_device *udev, int ep_index,
> +				int start_cycle,
> +				struct xhci_generic_trb *start_trb)
> +{
> +	struct xhci_ctrl *ctrl = udev->controller;
> +
> +	/*
> +	 * Pass all the TRBs to the hardware at once and make sure this write
> +	 * isn't reordered.
> +	 */
> +	if (start_cycle)
> +		start_trb->field[3] |= cpu_to_le32(start_cycle);
> +	else
> +		start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
> +
> +	xhci_flush_cache((uint32_t)start_trb, sizeof(struct xhci_generic_trb));
> +
> +	/* Ringing EP doorbell here */
> +	xhci_writel(&ctrl->dba->doorbell[udev->slot_id],
> +				DB_VALUE(ep_index, 0));
> +
> +	return;
> +}
> +
> +/**** POLLING mechanism for XHCI ****/
> +
> +/**
> + * Finalizes a handled event TRB by advancing our dequeue pointer and giving
> + * the TRB back to the hardware for recycling. Must call this exactly once at
> + * the end of each event handler, and not touch the TRB again afterwards.
> + *
> + * @param ctrl	Host controller data structure
> + * @return none
> + */
> +void xhci_acknowledge_event(struct xhci_ctrl *ctrl)
> +{
> +	/* Advance our dequeue pointer to the next event */
> +	inc_deq(ctrl, ctrl->event_ring);
> +
> +	/* Inform the hardware */
> +	xhci_writeq(&ctrl->ir_set->erst_dequeue,
> +		(uintptr_t)ctrl->event_ring->dequeue | ERST_EHB);
> +}
> +
> +/**
> + * Checks if there is a new event to handle on the event ring.
> + *
> + * @param ctrl	Host controller data structure
> + * @return 0 if failure else 1 on success
> + */
> +static int event_ready(struct xhci_ctrl *ctrl)
> +{
> +	union xhci_trb *event;
> +
> +	xhci_inval_cache((uint32_t)ctrl->event_ring->dequeue,
> +					sizeof(union xhci_trb));
> +
> +	event = ctrl->event_ring->dequeue;
> +
> +	/* Does the HC or OS own the TRB? */
> +	if ((le32_to_cpu(event->event_cmd.flags) & TRB_CYCLE) !=
> +		ctrl->event_ring->cycle_state)
> +		return 0;
> +
> +	return 1;
> +}
> +
> +/**
> + * Waits for a specific type of event and returns it. Discards unexpected
> + * events. Caller *must* call xhci_acknowledge_event() after it is finished
> + * processing the event, and must not access the returned pointer afterwards.
> + *
> + * @param ctrl		Host controller data structure
> + * @param expected	TRB type expected from Event TRB
> + * @return pointer to event trb
> + */
> +union xhci_trb *xhci_wait_for_event(struct xhci_ctrl *ctrl, trb_type expected)
> +{
> +	trb_type type;
> +	unsigned long ts = get_timer(0);
> +
> +	do {
> +		union xhci_trb *event = ctrl->event_ring->dequeue;
> +
> +		if (!event_ready(ctrl))
> +			continue;
> +
> +		type = TRB_FIELD_TO_TYPE(le32_to_cpu(event->event_cmd.flags));
> +		if (type == expected)
> +			return event;
> +
> +		if (type == TRB_PORT_STATUS)
> +		/* TODO: remove this once enumeration has been reworked */
> +			/*
> +			 * Port status change events always have a
> +			 * successful completion code
> +			 */
> +			BUG_ON(GET_COMP_CODE(
> +				le32_to_cpu(event->generic.field[2])) !=
> +								COMP_SUCCESS);
> +		else
> +			printf("Unexpected XHCI event TRB, skipping... "
> +				"(%08x %08x %08x %08x)\n",
> +				le32_to_cpu(event->generic.field[0]),
> +				le32_to_cpu(event->generic.field[1]),
> +				le32_to_cpu(event->generic.field[2]),
> +				le32_to_cpu(event->generic.field[3]));
> +
> +		xhci_acknowledge_event(ctrl);
> +	} while (get_timer(ts) < XHCI_TIMEOUT);
> +
> +	if (expected == TRB_TRANSFER)
> +		return NULL;
> +
> +	printf("XHCI timeout on event type %d... cannot recover.\n", expected);
> +	BUG();
> +}
> +
> +/*
> + * Stops transfer processing for an endpoint and throws away all unprocessed
> + * TRBs by setting the xHC's dequeue pointer to our enqueue pointer. The next
> + * xhci_bulk_tx/xhci_ctrl_tx on this enpoint will add new transfers there and
> + * ring the doorbell, causing this endpoint to start working again.
> + * (Careful: This will BUG() when there was no transfer in progress. Shouldn't
> + * happen in practice for current uses and is too complicated to fix right now.)
> + */
> +static void abort_td(struct usb_device *udev, int ep_index)
> +{
> +	struct xhci_ctrl *ctrl = udev->controller;
> +	struct xhci_ring *ring =  ctrl->devs[udev->slot_id]->eps[ep_index].ring;
> +	union xhci_trb *event;
> +	u32 field;
> +
> +	xhci_queue_command(ctrl, NULL, udev->slot_id, ep_index, TRB_STOP_RING);
> +
> +	event = xhci_wait_for_event(ctrl, TRB_TRANSFER);
> +	field = le32_to_cpu(event->trans_event.flags);
> +	BUG_ON(TRB_TO_SLOT_ID(field) != udev->slot_id);
> +	BUG_ON(TRB_TO_EP_INDEX(field) != ep_index);
> +	BUG_ON(GET_COMP_CODE(le32_to_cpu(event->trans_event.transfer_len
> +		!= COMP_STOP)));
> +	xhci_acknowledge_event(ctrl);
> +
> +	event = xhci_wait_for_event(ctrl, TRB_COMPLETION);
> +	BUG_ON(TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags))
> +		!= udev->slot_id || GET_COMP_CODE(le32_to_cpu(
> +		event->event_cmd.status)) != COMP_SUCCESS);
> +	xhci_acknowledge_event(ctrl);
> +
> +	xhci_queue_command(ctrl, (void *)((uintptr_t)ring->enqueue |
> +		ring->cycle_state), udev->slot_id, ep_index, TRB_SET_DEQ);
> +	event = xhci_wait_for_event(ctrl, TRB_COMPLETION);
> +	BUG_ON(TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags))
> +		!= udev->slot_id || GET_COMP_CODE(le32_to_cpu(
> +		event->event_cmd.status)) != COMP_SUCCESS);
> +	xhci_acknowledge_event(ctrl);
> +}
> +
> +static void record_transfer_result(struct usb_device *udev,
> +				   union xhci_trb *event, int length)
> +{
> +	udev->act_len = min(length, length -
> +		EVENT_TRB_LEN(le32_to_cpu(event->trans_event.transfer_len)));
> +
> +	switch (GET_COMP_CODE(le32_to_cpu(event->trans_event.transfer_len))) {
> +	case COMP_SUCCESS:
> +		BUG_ON(udev->act_len != length);
> +		/* fallthrough */
> +	case COMP_SHORT_TX:
> +		udev->status = 0;
> +		break;
> +	case COMP_STALL:
> +		udev->status = USB_ST_STALLED;
> +		break;
> +	case COMP_DB_ERR:
> +	case COMP_TRB_ERR:
> +		udev->status = USB_ST_BUF_ERR;
> +		break;
> +	case COMP_BABBLE:
> +		udev->status = USB_ST_BABBLE_DET;
> +		break;
> +	default:
> +		udev->status = 0x80;  /* USB_ST_TOO_LAZY_TO_MAKE_A_NEW_MACRO */
> +	}
> +}
> +
> +/**** Bulk and Control transfer methods ****/
> +/**
> + * Queues up the BULK Request
> + *
> + * @param udev		pointer to the USB device structure
> + * @param pipe		contains the DIR_IN or OUT , devnum
> + * @param length	length of the buffer
> + * @param buffer	buffer to be read/written based on the request
> + * @return returns 0 if successful else -1 on failure
> + */
> +int xhci_bulk_tx(struct usb_device *udev, unsigned long pipe,
> +			int length, void *buffer)
> +{
> +	int num_trbs = 0;
> +	struct xhci_generic_trb *start_trb;
> +	bool first_trb = 0;
> +	int start_cycle;
> +	u32 field = 0;
> +	u32 length_field = 0;
> +	struct xhci_ctrl *ctrl = udev->controller;
> +	int slot_id = udev->slot_id;
> +	int ep_index;
> +	struct xhci_virt_device *virt_dev;
> +	struct xhci_ep_ctx *ep_ctx;
> +	struct xhci_ring *ring;		/* EP transfer ring */
> +	union xhci_trb *event;
> +
> +	int running_total, trb_buff_len;
> +	unsigned int total_packet_count;
> +	int maxpacketsize;
> +	u64 addr;
> +	int ret;
> +	u32 trb_fields[4];
> +	u64 val_64 = (uintptr_t)buffer;
> +
> +	debug("dev=%p, pipe=%lx, buffer=%p, length=%d\n",
> +		udev, pipe, buffer, length);
> +
> +	ep_index = usb_pipe_ep_index(pipe);
> +	virt_dev = ctrl->devs[slot_id];
> +
> +	xhci_inval_cache((uint32_t)virt_dev->out_ctx->bytes,
> +					virt_dev->out_ctx->size);
> +
> +	ep_ctx = xhci_get_ep_ctx(ctrl, virt_dev->out_ctx, ep_index);
> +
> +	ring = virt_dev->eps[ep_index].ring;
> +	/*
> +	 * How much data is (potentially) left before the 64KB boundary?
> +	 * XHCI Spec puts restriction( TABLE 49 and 6.4.1 section of XHCI Spec)
> +	 * that the buffer should not span 64KB boundary. if so
> +	 * we send request in more than 1 TRB by chaining them.
> +	 */
> +	running_total = TRB_MAX_BUFF_SIZE -
> +			(lower_32_bits(val_64) & (TRB_MAX_BUFF_SIZE - 1));
> +	trb_buff_len = running_total;
> +	running_total &= TRB_MAX_BUFF_SIZE - 1;
> +
> +	/*
> +	 * If there's some data on this 64KB chunk, or we have to send a
> +	 * zero-length transfer, we need at least one TRB
> +	 */
> +	if (running_total != 0 || length == 0)
> +		num_trbs++;
> +
> +	/* How many more 64KB chunks to transfer, how many more TRBs? */
> +	while (running_total < length) {
> +		num_trbs++;
> +		running_total += TRB_MAX_BUFF_SIZE;
> +	}
> +
> +	/*
> +	 * XXX: Calling routine prepare_ring() called in place of
> +	 * prepare_trasfer() as there in 'Linux' since we are not
> +	 * maintaining multiple TDs/transfer at the same time.
> +	 */
> +	ret = prepare_ring(ctrl, ring,
> +			   le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK);
> +	if (ret < 0)
> +		return ret;
> +
> +	/*
> +	 * Don't give the first TRB to the hardware (by toggling the cycle bit)
> +	 * until we've finished creating all the other TRBs.  The ring's cycle
> +	 * state may change as we enqueue the other TRBs, so save it too.
> +	 */
> +	start_trb = &ring->enqueue->generic;
> +	start_cycle = ring->cycle_state;
> +
> +	running_total = 0;
> +	maxpacketsize = usb_maxpacket(udev, pipe);
> +
> +	total_packet_count = DIV_ROUND_UP(length, maxpacketsize);
> +
> +	/* How much data is in the first TRB? */
> +	/*
> +	 * How much data is (potentially) left before the 64KB boundary?
> +	 * XHCI Spec puts restriction( TABLE 49 and 6.4.1 section of XHCI Spec)
> +	 * that the buffer should not span 64KB boundary. if so
> +	 * we send request in more than 1 TRB by chaining them.
> +	 */
> +	addr = val_64;
> +
> +	if (trb_buff_len > length)
> +		trb_buff_len = length;
> +
> +	first_trb = true;
> +
> +	/* flush the buffer before use */
> +	xhci_flush_cache((uint32_t)buffer, length);
> +
> +	/* Queue the first TRB, even if it's zero-length */
> +	do {
> +		u32 remainder = 0;
> +		field = 0;
> +		/* Don't change the cycle bit of the first TRB until later */
> +		if (first_trb) {
> +			first_trb = false;
> +			if (start_cycle == 0)
> +				field |= TRB_CYCLE;
> +		} else {
> +			field |= ring->cycle_state;
> +		}
> +
> +		/*
> +		 * Chain all the TRBs together; clear the chain bit in the last
> +		 * TRB to indicate it's the last TRB in the chain.
> +		 */
> +		if (num_trbs > 1)
> +			field |= TRB_CHAIN;
> +		else
> +			field |= TRB_IOC;
> +
> +		/* Only set interrupt on short packet for IN endpoints */
> +		if (usb_pipein(pipe))
> +			field |= TRB_ISP;
> +
> +		/* Set the TRB length, TD size, and interrupter fields. */
> +		if (HC_VERSION(xhci_readl(&ctrl->hccr->cr_capbase)) < 0x100)
> +			remainder = xhci_td_remainder(length - running_total);
> +		else
> +			remainder = xhci_v1_0_td_remainder(running_total,
> +							   trb_buff_len,
> +							   total_packet_count,
> +							   maxpacketsize,
> +							   num_trbs - 1);
> +
> +		length_field = ((trb_buff_len & TRB_LEN_MASK) |
> +				remainder |
> +				((0 & TRB_INTR_TARGET_MASK) <<
> +				TRB_INTR_TARGET_SHIFT));
> +
> +		trb_fields[0] = lower_32_bits(addr);
> +		trb_fields[1] = upper_32_bits(addr);
> +		trb_fields[2] = length_field;
> +		trb_fields[3] = field | (TRB_NORMAL << TRB_TYPE_SHIFT);
> +
> +		queue_trb(ctrl, ring, (num_trbs > 1), trb_fields);
> +
> +		--num_trbs;
> +
> +		running_total += trb_buff_len;
> +
> +		/* Calculate length for next transfer */
> +		addr += trb_buff_len;
> +		trb_buff_len = min((length - running_total), TRB_MAX_BUFF_SIZE);
> +	} while (running_total < length);
> +
> +	giveback_first_trb(udev, ep_index, start_cycle, start_trb);
> +
> +	event = xhci_wait_for_event(ctrl, TRB_TRANSFER);
> +	if (!event) {
> +		debug("XHCI bulk transfer timed out, aborting...\n");
> +		abort_td(udev, ep_index);
> +		udev->status = USB_ST_NAK_REC;  /* closest thing to a timeout */
> +		udev->act_len = 0;
> +		return -1;
> +	}
> +	field = le32_to_cpu(event->trans_event.flags);
> +
> +	BUG_ON(TRB_TO_SLOT_ID(field) != slot_id);
> +	BUG_ON(TRB_TO_EP_INDEX(field) != ep_index);
> +	BUG_ON(*(void **)(uintptr_t)le64_to_cpu(event->trans_event.buffer) -
> +		buffer > (size_t)length);
> +
> +	record_transfer_result(udev, event, length);
> +	xhci_acknowledge_event(ctrl);
> +	xhci_inval_cache((uint32_t)buffer, length);
> +
> +	return (udev->status != USB_ST_NOT_PROC) ? 0 : -1;
> +}
> +
> +/**
> + * Queues up the Control Transfer Request
> + *
> + * @param udev	pointer to the USB device structure
> + * @param pipe		contains the DIR_IN or OUT , devnum
> + * @param req		request type
> + * @param length	length of the buffer
> + * @param buffer	buffer to be read/written based on the request
> + * @return returns 0 if successful else -1 on failure
> + */
> +int xhci_ctrl_tx(struct usb_device *udev, unsigned long pipe,
> +			struct devrequest *req,	int length,
> +			void *buffer)
> +{
> +	int ret;
> +	int start_cycle;
> +	int num_trbs;
> +	u32 field;
> +	u32 length_field;
> +	u64 buf_64 = 0;
> +	struct xhci_generic_trb *start_trb;
> +	struct xhci_ctrl *ctrl = udev->controller;
> +	int slot_id = udev->slot_id;
> +	int ep_index;
> +	u32 trb_fields[4];
> +	struct xhci_virt_device *virt_dev = ctrl->devs[slot_id];
> +	struct xhci_ring *ep_ring;
> +	union xhci_trb *event;
> +
> +	debug("req=%u (%#x), type=%u (%#x), value=%u (%#x), index=%u\n",
> +		req->request, req->request,
> +		req->requesttype, req->requesttype,
> +		le16_to_cpu(req->value), le16_to_cpu(req->value),
> +		le16_to_cpu(req->index));
> +
> +	ep_index = usb_pipe_ep_index(pipe);
> +
> +	ep_ring = virt_dev->eps[ep_index].ring;
> +
> +	/*
> +	 * Check to see if the max packet size for the default control
> +	 * endpoint changed during FS device enumeration
> +	 */
> +	if (udev->speed == USB_SPEED_FULL) {
> +		ret = xhci_check_maxpacket(udev);
> +		if (ret < 0)
> +			return ret;
> +	}
> +
> +	xhci_inval_cache((uint32_t)virt_dev->out_ctx->bytes,
> +				virt_dev->out_ctx->size);
> +
> +	struct xhci_ep_ctx *ep_ctx = NULL;
> +	ep_ctx = xhci_get_ep_ctx(ctrl, virt_dev->out_ctx, ep_index);
> +
> +	/* 1 TRB for setup, 1 for status */
> +	num_trbs = 2;
> +	/*
> +	 * Don't need to check if we need additional event data and normal TRBs,
> +	 * since data in control transfers will never get bigger than 16MB
> +	 * XXX: can we get a buffer that crosses 64KB boundaries?
> +	 */
> +
> +	if (length > 0)
> +		num_trbs++;
> +	/*
> +	 * XXX: Calling routine prepare_ring() called in place of
> +	 * prepare_trasfer() as there in 'Linux' since we are not
> +	 * maintaining multiple TDs/transfer at the same time.
> +	 */
> +	ret = prepare_ring(ctrl, ep_ring,
> +				le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK);
> +
> +	if (ret < 0)
> +		return ret;
> +
> +	/*
> +	 * Don't give the first TRB to the hardware (by toggling the cycle bit)
> +	 * until we've finished creating all the other TRBs.  The ring's cycle
> +	 * state may change as we enqueue the other TRBs, so save it too.
> +	 */
> +	start_trb = &ep_ring->enqueue->generic;
> +	start_cycle = ep_ring->cycle_state;
> +
> +	debug("start_trb %p, start_cycle %d\n", start_trb, start_cycle);
> +
> +	/* Queue setup TRB - see section 6.4.1.2.1 */
> +	/* FIXME better way to translate setup_packet into two u32 fields? */
> +	field = 0;
> +	field |= TRB_IDT | (TRB_SETUP << TRB_TYPE_SHIFT);
> +	if (start_cycle == 0)
> +		field |= 0x1;
> +
> +	/* xHCI 1.0 6.4.1.2.1: Transfer Type field */
> +	if (HC_VERSION(xhci_readl(&ctrl->hccr->cr_capbase)) == 0x100) {
> +		if (length > 0) {
> +			if (req->requesttype & USB_DIR_IN)
> +				field |= (TRB_DATA_IN << TRB_TX_TYPE_SHIFT);
> +			else
> +				field |= (TRB_DATA_OUT << TRB_TX_TYPE_SHIFT);
> +		}
> +	}
> +
> +	debug("req->requesttype = %d, req->request = %d,"
> +		"le16_to_cpu(req->value) = %d,"
> +		"le16_to_cpu(req->index) = %d,"
> +		"le16_to_cpu(req->length) = %d\n",
> +		req->requesttype, req->request, le16_to_cpu(req->value),
> +		le16_to_cpu(req->index), le16_to_cpu(req->length));
> +
> +	trb_fields[0] = req->requesttype | req->request << 8 |
> +				le16_to_cpu(req->value) << 16;
> +	trb_fields[1] = le16_to_cpu(req->index) |
> +			le16_to_cpu(req->length) << 16;
> +	/* TRB_LEN | (TRB_INTR_TARGET) */
> +	trb_fields[2] = (8 | ((0 & TRB_INTR_TARGET_MASK) <<
> +			TRB_INTR_TARGET_SHIFT));
> +	/* Immediate data in pointer */
> +	trb_fields[3] = field;
> +	queue_trb(ctrl, ep_ring, true, trb_fields);
> +
> +	/* Re-initializing field to zero */
> +	field = 0;
> +	/* If there's data, queue data TRBs */
> +	/* Only set interrupt on short packet for IN endpoints */
> +	if (usb_pipein(pipe))
> +		field = TRB_ISP | (TRB_DATA << TRB_TYPE_SHIFT);
> +	else
> +		field = (TRB_DATA << TRB_TYPE_SHIFT);
> +
> +	length_field = (length & TRB_LEN_MASK) | xhci_td_remainder(length) |
> +			((0 & TRB_INTR_TARGET_MASK) << TRB_INTR_TARGET_SHIFT);
> +	debug("length_field = %d, length = %d,"
> +		"xhci_td_remainder(length) = %d , TRB_INTR_TARGET(0) = %d\n",
> +		length_field, (length & TRB_LEN_MASK),
> +		xhci_td_remainder(length), 0);
> +
> +	if (length > 0) {
> +		if (req->requesttype & USB_DIR_IN)
> +			field |= TRB_DIR_IN;
> +		buf_64 = (uintptr_t)buffer;
> +
> +		trb_fields[0] = lower_32_bits(buf_64);
> +		trb_fields[1] = upper_32_bits(buf_64);
> +		trb_fields[2] = length_field;
> +		trb_fields[3] = field | ep_ring->cycle_state;
> +
> +		xhci_flush_cache((uint32_t)buffer, length);
> +		queue_trb(ctrl, ep_ring, true, trb_fields);
> +	}
> +
> +	/*
> +	 * Queue status TRB -
> +	 * see Table 7 and sections 4.11.2.2 and 6.4.1.2.3
> +	 */
> +
> +	/* If the device sent data, the status stage is an OUT transfer */
> +	field = 0;
> +	if (length > 0 && req->requesttype & USB_DIR_IN)
> +		field = 0;
> +	else
> +		field = TRB_DIR_IN;
> +
> +	trb_fields[0] = 0;
> +	trb_fields[1] = 0;
> +	trb_fields[2] = ((0 & TRB_INTR_TARGET_MASK) << TRB_INTR_TARGET_SHIFT);
> +		/* Event on completion */
> +	trb_fields[3] = field | TRB_IOC |
> +			(TRB_STATUS << TRB_TYPE_SHIFT) |
> +			ep_ring->cycle_state;
> +
> +	queue_trb(ctrl, ep_ring, false, trb_fields);
> +
> +	giveback_first_trb(udev, ep_index, start_cycle, start_trb);
> +
> +	event = xhci_wait_for_event(ctrl, TRB_TRANSFER);
> +	if (!event)
> +		goto abort;
> +	field = le32_to_cpu(event->trans_event.flags);
> +
> +	BUG_ON(TRB_TO_SLOT_ID(field) != slot_id);
> +	BUG_ON(TRB_TO_EP_INDEX(field) != ep_index);
> +
> +	record_transfer_result(udev, event, length);
> +	xhci_acknowledge_event(ctrl);
> +
> +	/* Invalidate buffer to make it available to usb-core */
> +	if (length > 0)
> +		xhci_inval_cache((uint32_t)buffer, length);
> +
> +	if (GET_COMP_CODE(le32_to_cpu(event->trans_event.transfer_len))
> +			== COMP_SHORT_TX) {
> +		/* Short data stage, clear up additional status stage event */
> +		event = xhci_wait_for_event(ctrl, TRB_TRANSFER);
> +		if (!event)
> +			goto abort;
> +		BUG_ON(TRB_TO_SLOT_ID(field) != slot_id);
> +		BUG_ON(TRB_TO_EP_INDEX(field) != ep_index);
> +		xhci_acknowledge_event(ctrl);
> +	}
> +
> +	return (udev->status != USB_ST_NOT_PROC) ? 0 : -1;
> +
> +abort:
> +	debug("XHCI control transfer timed out, aborting...\n");
> +	abort_td(udev, ep_index);
> +	udev->status = USB_ST_NAK_REC;
> +	udev->act_len = 0;
> +	return -1;
> +}
> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> new file mode 100644
> index 0000000..3e53e3d
> --- /dev/null
> +++ b/drivers/usb/host/xhci.c
> @@ -0,0 +1,1040 @@
> +/*
> + * USB HOST XHCI Controller stack
> + *
> + * Copyright (C) 2013 Samsung Electronics Co.Ltd
> + *	Vivek Gautam <gautam.vivek@samsung.com>
> + *	Vikas Sajjan <vikas.sajjan@samsung.com>
> + *
> + * Based on xHCI host controller driver in linux-kernel
> + * by Sarah Sharp.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301 USA
> + */
> +
> +/**
> + * This file gives the xhci stack for usb3.0 looking into
> + * xhci specification Rev1.0 (5/21/10).
> + * The quirk devices support hasn't been given yet.
> + */
> +

Needs new SPDX license.

* SPDX-License-Identifier:	GPL-2.0+



> +#include <common.h>
> +#include <asm/byteorder.h>
> +#include <usb.h>
> +#include <asm/io.h>

Move this to xhci.h

> +#include <malloc.h>
> +#include <watchdog.h>
> +#include <asm/cache.h>
> +#include <asm/unaligned.h>
> +#include <asm-generic/errno.h>
> +#include "xhci.h"
> +
> +#ifndef CONFIG_USB_MAX_CONTROLLER_COUNT
> +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
> +#endif
> +
> +static struct descriptor {
> +	struct usb_hub_descriptor hub;
> +	struct usb_device_descriptor device;
> +	struct usb_config_descriptor config;
> +	struct usb_interface_descriptor interface;
> +	struct usb_endpoint_descriptor endpoint;
> +	struct usb_ss_ep_comp_descriptor ep_companion;
> +} __attribute__ ((packed)) descriptor = {
> +	{
> +		0xc,		/* bDescLength */
> +		0x2a,		/* bDescriptorType: hub descriptor */
> +		2,		/* bNrPorts -- runtime modified */
> +		cpu_to_le16(0x8), /* wHubCharacteristics */
> +		10,		/* bPwrOn2PwrGood */
> +		0,		/* bHubCntrCurrent */
> +		{},		/* Device removable */
> +		{}		/* at most 7 ports! XXX */
> +	},
> +	{
> +		0x12,		/* bLength */
> +		1,		/* bDescriptorType: UDESC_DEVICE */
> +		cpu_to_le16(0x0300), /* bcdUSB: v3.0 */
> +		9,		/* bDeviceClass: UDCLASS_HUB */
> +		0,		/* bDeviceSubClass: UDSUBCLASS_HUB */
> +		3,		/* bDeviceProtocol: UDPROTO_SSHUBSTT */
> +		9,		/* bMaxPacketSize: 512 bytes  2^9 */
> +		0x0000,		/* idVendor */
> +		0x0000,		/* idProduct */
> +		cpu_to_le16(0x0100), /* bcdDevice */
> +		1,		/* iManufacturer */
> +		2,		/* iProduct */
> +		0,		/* iSerialNumber */
> +		1		/* bNumConfigurations: 1 */
> +	},
> +	{
> +		0x9,
> +		2,		/* bDescriptorType: UDESC_CONFIG */
> +		cpu_to_le16(0x1f), /* includes SS endpoint descriptor */
> +		1,		/* bNumInterface */
> +		1,		/* bConfigurationValue */
> +		0,		/* iConfiguration */
> +		0x40,		/* bmAttributes: UC_SELF_POWER */
> +		0		/* bMaxPower */
> +	},
> +	{
> +		0x9,		/* bLength */
> +		4,		/* bDescriptorType: UDESC_INTERFACE */
> +		0,		/* bInterfaceNumber */
> +		0,		/* bAlternateSetting */
> +		1,		/* bNumEndpoints */
> +		9,		/* bInterfaceClass: UICLASS_HUB */
> +		0,		/* bInterfaceSubClass: UISUBCLASS_HUB */
> +		0,		/* bInterfaceProtocol: UIPROTO_HSHUBSTT */
> +		0		/* iInterface */
> +	},
> +	{
> +		0x7,		/* bLength */
> +		5,		/* bDescriptorType: UDESC_ENDPOINT */
> +		0x81,		/* bEndpointAddress: IN endpoint 1 */
> +		3,		/* bmAttributes: UE_INTERRUPT */
> +		8,		/* wMaxPacketSize */
> +		255		/* bInterval */
> +	},
> +	{
> +		0x06,		/* ss_bLength */
> +		0x30,		/* ss_bDescriptorType: SS EP Companion */
> +		0x00,		/* ss_bMaxBurst: allows 1 TX between ACKs */
> +		/* ss_bmAttributes: 1 packet per service interval */
> +		0x00,
> +		/* ss_wBytesPerInterval: 15 bits for max 15 ports */
> +		cpu_to_le16(0x02),
> +	},
> +};
> +
> +static struct xhci_ctrl xhcic[CONFIG_USB_MAX_CONTROLLER_COUNT];
> +
> +/**
> + * Waits for as per specified amount of time
> + * for the "result" to match with "done"
> + *
> + * @param ptr	pointer to the register to be read
> + * @param mask	mask for the value read
> + * @param done	value to be campared with result
> + * @param usec	time to wait till
> + * @return 0 if handshake is success else < 0 on failure
> + */
> +static int handshake(uint32_t volatile *ptr, uint32_t mask,
> +					uint32_t done, int usec)
> +{
> +	uint32_t result;
> +
> +	do {
> +		result = xhci_readl(ptr);
> +		if (result == ~(uint32_t)0)
> +			return -ENODEV;
> +		result &= mask;
> +		if (result == done)
> +			return 0;
> +		usec--;
> +		udelay(1);
> +	} while (usec > 0);
> +
> +	return -ETIMEDOUT;
> +}
> +
> +/**
> + * Set the run bit and wait for the host to be running.
> + *
> + * @param hcor	pointer to host controller operation registers
> + * @return status of the Handshake
> + */
> +static int xhci_start(struct xhci_hcor *hcor)
> +{
> +	u32 temp;
> +	int ret;
> +
> +	printf("Starting the controller\n");
> +	temp = xhci_readl(&hcor->or_usbcmd);
> +	temp |= (CMD_RUN);
> +	xhci_writel(&hcor->or_usbcmd, temp);
> +
> +	/*
> +	 * Wait for the HCHalted Status bit to be 0 to indicate the host is
> +	 * running.
> +	 */
> +	ret = handshake(&hcor->or_usbsts, STS_HALT, 0, XHCI_MAX_HALT_USEC);
> +	if (ret)
> +		debug("Host took too long to start, "
> +				"waited %u microseconds.\n",
> +				XHCI_MAX_HALT_USEC);
> +	return ret;
> +}
> +
> +/**
> + * Resets the XHCI Controller
> + *
> + * @param hcor	pointer to host controller operation registers
> + * @return -1 if XHCI Controller is halted else status of handshake
> + */
> +int xhci_reset(struct xhci_hcor *hcor)
> +{
> +	u32 cmd;
> +	u32 state;
> +	int ret;
> +
> +	/* Halting the Host first */
> +	debug("// Halt the HC\n");
> +	state = xhci_readl(&hcor->or_usbsts) & STS_HALT;
> +	if (!state) {
> +		cmd = xhci_readl(&hcor->or_usbcmd);
> +		cmd &= ~CMD_RUN;
> +		xhci_writel(&hcor->or_usbcmd, cmd);
> +	}
> +
> +	ret = handshake(&hcor->or_usbsts,
> +			STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
> +	if (ret) {
> +		printf("Host not halted after %u microseconds.\n",
> +				XHCI_MAX_HALT_USEC);
> +		return -1;
> +	}
> +
> +	debug("// Reset the HC\n");
> +	cmd = xhci_readl(&hcor->or_usbcmd);
> +	cmd |= CMD_RESET;
> +	xhci_writel(&hcor->or_usbcmd, cmd);
> +
> +	ret = handshake(&hcor->or_usbcmd, CMD_RESET, 0, XHCI_MAX_RESET_USEC);
> +	if (ret)
> +		return ret;
> +
> +	/*
> +	 * xHCI cannot write to any doorbells or operational registers other
> +	 * than status until the "Controller Not Ready" flag is cleared.
> +	 */
> +	return handshake(&hcor->or_usbsts, STS_CNR, 0, XHCI_MAX_RESET_USEC);
> +}
> +
> +/**
> + * Used for passing endpoint bitmasks between the core and HCDs.
> + * Find the index for an endpoint given its descriptor.
> + * Use the return value to right shift 1 for the bitmask.
> + *
> + * Index  = (epnum * 2) + direction - 1,
> + * where direction = 0 for OUT, 1 for IN.
> + * For control endpoints, the IN index is used (OUT index is unused), so
> + * index = (epnum * 2) + direction - 1 = (epnum * 2) + 1 - 1 = (epnum * 2)
> + *
> + * @param desc	USB enpdoint Descriptor
> + * @return index of the Endpoint
> + */
> +static unsigned int xhci_get_ep_index(struct usb_endpoint_descriptor *desc)
> +{
> +	unsigned int index;
> +
> +	if (usb_endpoint_xfer_control(desc)) {
> +		index = (unsigned int)(usb_endpoint_num(desc) * 2);
> +	} else {
> +		index = (unsigned int)((usb_endpoint_num(desc) * 2) -
> +				(usb_endpoint_dir_in(desc) ? 0 : 1));
> +	}

No brackets around single line if statements

> +
> +	return index;
> +}
> +
> +/**
> + * Issue a configure endpoint command or evaluate context command
> + * and wait for it to finish.
> + *
> + * @param udev	pointer to the Device Data Structure
> + * @param ctx_change	flag to indicate the Context has changed or NOT
> + * @return 0 on success, -1 on failure
> + */
> +static int xhci_configure_endpoints(struct usb_device *udev, bool ctx_change)
> +{
> +	struct xhci_container_ctx *in_ctx;
> +	struct xhci_virt_device *virt_dev;
> +	struct xhci_ctrl *ctrl = udev->controller;
> +	union xhci_trb *event;
> +
> +	virt_dev = ctrl->devs[udev->slot_id];
> +	in_ctx = virt_dev->in_ctx;
> +
> +	xhci_flush_cache((uint32_t)in_ctx->bytes, in_ctx->size);
> +	xhci_queue_command(ctrl, in_ctx->bytes, udev->slot_id, 0,
> +			   ctx_change ? TRB_EVAL_CONTEXT : TRB_CONFIG_EP);
> +	event = xhci_wait_for_event(ctrl, TRB_COMPLETION);
> +	BUG_ON(TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags))
> +		!= udev->slot_id);
> +
> +	switch (GET_COMP_CODE(le32_to_cpu(event->event_cmd.status))) {
> +	case COMP_SUCCESS:
> +		debug("Successful %s command\n",
> +			ctx_change ? "Evaluate Context" : "Configure Endpoint");
> +		break;
> +	default:
> +		printf("ERROR: %s command returned completion code %d.\n",
> +			ctx_change ? "Evaluate Context" : "Configure Endpoint",
> +			GET_COMP_CODE(le32_to_cpu(event->event_cmd.status)));
> +		return -1;
> +	}
> +
> +	xhci_acknowledge_event(ctrl);
> +
> +	return 0;
> +}
> +
> +/**
> + * Configure the endpoint, programming the device contexts.
> + *
> + * @param udev	pointer to the USB device structure
> + * @return returns the status of the xhci_configure_endpoints
> + */
> +static int xhci_set_configuration(struct usb_device *udev)
> +{
> +	struct xhci_container_ctx *in_ctx;
> +	struct xhci_container_ctx *out_ctx;
> +	struct xhci_input_control_ctx *ctrl_ctx;
> +	struct xhci_slot_ctx *slot_ctx;
> +	struct xhci_ep_ctx *ep_ctx[MAX_EP_CTX_NUM];
> +	int cur_ep;
> +	int max_ep_flag = 0;
> +	int ep_index;
> +	unsigned int dir;
> +	unsigned int ep_type;
> +	struct xhci_ctrl *ctrl = udev->controller;
> +	int num_of_ep;
> +	int ep_flag = 0;
> +	u64 trb_64 = 0;
> +	int slot_id = udev->slot_id;
> +	struct xhci_virt_device *virt_dev = ctrl->devs[slot_id];
> +	struct usb_interface *ifdesc;
> +
> +	out_ctx = virt_dev->out_ctx;
> +	in_ctx = virt_dev->in_ctx;
> +
> +	num_of_ep = udev->config.if_desc[0].no_of_ep;
> +	ifdesc = &udev->config.if_desc[0];
> +
> +	ctrl_ctx = xhci_get_input_control_ctx(in_ctx);
> +	/* Zero the input context control */
> +	ctrl_ctx->add_flags = 0;
> +	ctrl_ctx->drop_flags = 0;
> +
> +	/* EP_FLAG gives values 1 & 4 for EP1OUT and EP2IN */
> +	for (cur_ep = 0; cur_ep < num_of_ep; cur_ep++) {
> +		ep_flag = xhci_get_ep_index(&ifdesc->ep_desc[cur_ep]);
> +		ctrl_ctx->add_flags |= cpu_to_le32(1 << (ep_flag + 1));
> +		if (max_ep_flag < ep_flag)
> +			max_ep_flag = ep_flag;
> +	}
> +
> +	xhci_inval_cache((uint32_t)out_ctx->bytes, out_ctx->size);
> +
> +	/* slot context */
> +	xhci_slot_copy(ctrl, in_ctx, out_ctx);
> +	slot_ctx = xhci_get_slot_ctx(ctrl, in_ctx);
> +	slot_ctx->dev_info &= ~(LAST_CTX_MASK);
> +	slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(max_ep_flag + 1) | 0);
> +
> +	xhci_endpoint_copy(ctrl, in_ctx, out_ctx, 0);
> +
> +	/* filling up ep contexts */
> +	for (cur_ep = 0; cur_ep < num_of_ep; cur_ep++) {
> +		struct usb_endpoint_descriptor *endpt_desc = NULL;
> +
> +		endpt_desc = &ifdesc->ep_desc[cur_ep];
> +		trb_64 = 0;
> +
> +		ep_index = xhci_get_ep_index(endpt_desc);
> +		ep_ctx[ep_index] = xhci_get_ep_ctx(ctrl, in_ctx, ep_index);
> +
> +		/* Allocate the ep rings */
> +		virt_dev->eps[ep_index].ring = xhci_ring_alloc(1, true);
> +		if (!virt_dev->eps[ep_index].ring)
> +			return -1;
> +
> +		/*NOTE: ep_desc[0] actually represents EP1 and so on */
> +		dir = (((endpt_desc->bEndpointAddress) & (0x80)) >> 7);
> +		ep_type = (((endpt_desc->bmAttributes) & (0x3)) | (dir << 2));
> +		ep_ctx[ep_index]->ep_info2 =
> +			cpu_to_le32(ep_type << EP_TYPE_SHIFT);
> +		ep_ctx[ep_index]->ep_info2 |=
> +			cpu_to_le32(MAX_PACKET
> +			(get_unaligned(&endpt_desc->wMaxPacketSize)));
> +
> +		ep_ctx[ep_index]->ep_info2 |=
> +			cpu_to_le32(((0 & MAX_BURST_MASK) << MAX_BURST_SHIFT) |
> +			((3 & ERROR_COUNT_MASK) << ERROR_COUNT_SHIFT));
> +
> +		trb_64 = (uintptr_t)
> +				virt_dev->eps[ep_index].ring->enqueue;
> +		ep_ctx[ep_index]->deq = cpu_to_le64(trb_64 |
> +				virt_dev->eps[ep_index].ring->cycle_state);
> +	}
> +
> +	return xhci_configure_endpoints(udev, false);
> +}
> +
> +/**
> + * Issue an Address Device command (which will issue a SetAddress request to
> + * the device).
> + *
> + * @param udev pointer to the Device Data Structure
> + * @return 0 if successful else error code on failure
> + */
> +static int xhci_address_device(struct usb_device *udev)
> +{
> +	int ret = 0;
> +	struct xhci_ctrl *ctrl = udev->controller;
> +	struct xhci_slot_ctx *slot_ctx;
> +	struct xhci_input_control_ctx *ctrl_ctx;
> +	struct xhci_virt_device *virt_dev;
> +	int slot_id = udev->slot_id;
> +	union xhci_trb *event;
> +
> +	virt_dev = ctrl->devs[slot_id];
> +
> +	/*
> +	 * This is the first Set Address since device plug-in
> +	 * so setting up the slot context.
> +	 */
> +	debug("Setting up addressable devices\n");
> +	xhci_setup_addressable_virt_dev(udev);
> +
> +	ctrl_ctx = xhci_get_input_control_ctx(virt_dev->in_ctx);
> +	ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
> +	ctrl_ctx->drop_flags = 0;
> +
> +	xhci_queue_command(ctrl, (void *)ctrl_ctx, slot_id, 0, TRB_ADDR_DEV);
> +	event = xhci_wait_for_event(ctrl, TRB_COMPLETION);
> +	BUG_ON(TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags)) != slot_id);
> +
> +	switch (GET_COMP_CODE(le32_to_cpu(event->event_cmd.status))) {
> +	case COMP_CTX_STATE:
> +	case COMP_EBADSLT:
> +		printf("Setup ERROR: address device command for slot %d.\n",
> +								slot_id);
> +		ret = -EINVAL;
> +		break;
> +	case COMP_TX_ERR:
> +		printf("Device not responding to set address.\n");
> +		ret = -EPROTO;
> +		break;
> +	case COMP_DEV_ERR:
> +		printf("ERROR: Incompatible device"
> +					"for address device command.\n");
> +		ret = -ENODEV;
> +		break;
> +	case COMP_SUCCESS:
> +		debug("Successful Address Device command\n");
> +		udev->status = 0;
> +		break;
> +	default:
> +		printf("ERROR: unexpected command completion code 0x%x.\n",
> +			GET_COMP_CODE(le32_to_cpu(event->event_cmd.status)));
> +		ret = -EINVAL;
> +		break;
> +	}
> +
> +	xhci_acknowledge_event(ctrl);
> +
> +	if (ret < 0)
> +		/*
> +		 * TODO: Unsuccessful Address Device command shall leave the
> +		 * slot in default state. So, issue Disable Slot command now.
> +		 */
> +		return ret;
> +
> +	xhci_inval_cache((uint32_t)virt_dev->out_ctx->bytes,
> +				virt_dev->out_ctx->size);
> +	slot_ctx = xhci_get_slot_ctx(ctrl, virt_dev->out_ctx);
> +
> +	debug("xHC internal address is: %d\n",
> +		le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK);
> +
> +	return 0;
> +}
> +
> +/**
> + * Issue Enable slot command to the controller to allocate
> + * device slot and assign the slot id. It fails if the xHC
> + * ran out of device slots, the Enable Slot command timed out,
> + * or allocating memory failed.
> + *
> + * @param udev	pointer to the Device Data Structure
> + * @return Returns 0 on succes else return -1 on failure
> + */
> +int usb_alloc_device(struct usb_device *udev)
> +{
> +	union xhci_trb *event;
> +	struct xhci_ctrl *ctrl = udev->controller;
> +
> +	/*
> +	 * Root hub will be first device to be initailized.
> +	 * If this device is root-hub, don't do any xHC related
> +	 * stuff.
> +	 */
> +	if (ctrl->rootdev == 0) {
> +		udev->speed = USB_SPEED_SUPER;
> +		return 0;
> +	}
> +
> +	xhci_queue_command(ctrl, NULL, 0, 0, TRB_ENABLE_SLOT);
> +	event = xhci_wait_for_event(ctrl, TRB_COMPLETION);
> +	BUG_ON(GET_COMP_CODE(le32_to_cpu(event->event_cmd.status))
> +		!= COMP_SUCCESS);
> +
> +	udev->slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags));
> +
> +	xhci_acknowledge_event(ctrl);
> +
> +	if (xhci_alloc_virt_device(udev) < 0) {
> +		/*
> +		 * TODO: Unsuccessful Address Device command shall leave
> +		 * the slot in default. So, issue Disable Slot command now.
> +		 */
> +		printf("Could not allocate xHCI USB device data structures\n");
> +		return -1;
> +	}
> +
> +	return 0;
> +}
> +
> +/*
> + * Full speed devices may have a max packet size greater than 8 bytes, but the
> + * USB core doesn't know that until it reads the first 8 bytes of the
> + * descriptor.  If the usb_device's max packet size changes after that point,
> + * we need to issue an evaluate context command and wait on it.
> + *
> + * @param udev	pointer to the Device Data Structure
> + * @return returns the status of the xhci_configure_endpoints
> + */
> +int xhci_check_maxpacket(struct usb_device *udev)
> +{
> +	struct xhci_ctrl *ctrl = udev->controller;
> +	unsigned int slot_id = udev->slot_id;
> +	int ep_index = 0;	/* control endpoint */
> +	struct xhci_container_ctx *in_ctx;
> +	struct xhci_container_ctx *out_ctx;
> +	struct xhci_input_control_ctx *ctrl_ctx;
> +	struct xhci_ep_ctx *ep_ctx;
> +	int max_packet_size;
> +	int hw_max_packet_size;
> +	int ret = 0;
> +	struct usb_interface *ifdesc;
> +
> +	ifdesc = &udev->config.if_desc[0];
> +
> +	out_ctx = ctrl->devs[slot_id]->out_ctx;
> +	xhci_inval_cache((uint32_t)out_ctx->bytes, out_ctx->size);
> +
> +	ep_ctx = xhci_get_ep_ctx(ctrl, out_ctx, ep_index);
> +	hw_max_packet_size = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2));
> +	max_packet_size = usb_endpoint_maxp(&ifdesc->ep_desc[0]);
> +	if (hw_max_packet_size != max_packet_size) {
> +		debug("Max Packet Size for ep 0 changed.\n");
> +		debug("Max packet size in usb_device = %d\n", max_packet_size);
> +		debug("Max packet size in xHCI HW = %d\n", hw_max_packet_size);
> +		debug("Issuing evaluate context command.\n");
> +
> +		/* Set up the modified control endpoint 0 */
> +		xhci_endpoint_copy(ctrl, ctrl->devs[slot_id]->in_ctx,
> +				ctrl->devs[slot_id]->out_ctx, ep_index);
> +		in_ctx = ctrl->devs[slot_id]->in_ctx;
> +		ep_ctx = xhci_get_ep_ctx(ctrl, in_ctx, ep_index);
> +		ep_ctx->ep_info2 &= cpu_to_le32(~MAX_PACKET_MASK);
> +		ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet_size));
> +
> +		/*
> +		 * Set up the input context flags for the command
> +		 * FIXME: This won't work if a non-default control endpoint
> +		 * changes max packet sizes.
> +		 */
> +		ctrl_ctx = xhci_get_input_control_ctx(in_ctx);
> +		ctrl_ctx->add_flags = cpu_to_le32(EP0_FLAG);
> +		ctrl_ctx->drop_flags = 0;
> +
> +		ret = xhci_configure_endpoints(udev, true);
> +	}
> +	return ret;
> +}
> +
> +/**
> + * Clears the Change bits of the Port Status Register
> + *
> + * @param wValue	request value
> + * @param wIndex	request index
> + * @param addr		address of posrt status register
> + * @param port_status	state of port status register
> + * @return none
> + */
> +static void xhci_clear_port_change_bit(u16 wValue,
> +		u16 wIndex, volatile uint32_t *addr, u32 port_status)
> +{
> +	char *port_change_bit;
> +	u32 status;
> +
> +	switch (wValue) {
> +	case USB_PORT_FEAT_C_RESET:
> +		status = PORT_RC;
> +		port_change_bit = "reset";
> +		break;
> +	case USB_PORT_FEAT_C_CONNECTION:
> +		status = PORT_CSC;
> +		port_change_bit = "connect";
> +		break;
> +	case USB_PORT_FEAT_C_OVER_CURRENT:
> +		status = PORT_OCC;
> +		port_change_bit = "over-current";
> +		break;
> +	case USB_PORT_FEAT_C_ENABLE:
> +		status = PORT_PEC;
> +		port_change_bit = "enable/disable";
> +		break;
> +	case USB_PORT_FEAT_C_SUSPEND:
> +		status = PORT_PLC;
> +		port_change_bit = "suspend/resume";
> +		break;
> +	default:
> +		/* Should never happen */
> +		return;
> +	}
> +
> +	/* Change bits are all write 1 to clear */
> +	xhci_writel(addr, port_status | status);
> +
> +	port_status = xhci_readl(addr);
> +	debug("clear port %s change, actual port %d status  = 0x%x\n",
> +			port_change_bit, wIndex, port_status);
> +}
> +
> +/**
> + * Save Read Only (RO) bits and save read/write bits where
> + * writing a 0 clears the bit and writing a 1 sets the bit (RWS).
> + * For all other types (RW1S, RW1CS, RW, and RZ), writing a '0' has no effect.
> + *
> + * @param state	state of the Port Status and Control Regsiter
> + * @return a value that would result in the port being in the
> + *	   same state, if the value was written to the port
> + *	   status control register.
> + */
> +static u32 xhci_port_state_to_neutral(u32 state)
> +{
> +	/* Save read-only status and port state */
> +	return (state & XHCI_PORT_RO) | (state & XHCI_PORT_RWS);
> +}
> +
> +/**
> + * Submits the Requests to the XHCI Host Controller
> + *
> + * @param udev pointer to the USB device structure
> + * @param pipe contains the DIR_IN or OUT , devnum
> + * @param buffer buffer to be read/written based on the request
> + * @return returns 0 if successful else -1 on failure
> + */
> +static int xhci_submit_root(struct usb_device *udev, unsigned long pipe,
> +			void *buffer, struct devrequest *req)
> +{
> +	uint8_t tmpbuf[4];
> +	u16 typeReq;
> +	void *srcptr = NULL;
> +	int len, srclen;
> +	uint32_t reg;
> +	volatile uint32_t *status_reg;
> +	struct xhci_ctrl *ctrl = udev->controller;
> +	struct xhci_hcor *hcor = ctrl->hcor;
> +
> +	if (((req->requesttype & USB_RT_PORT) &&
> +	     le16_to_cpu(req->index)) > CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS) {
> +		printf("The request port(%d) is not configured\n",
> +			le16_to_cpu(req->index) - 1);
> +		return -1;
> +	}
> +
> +	status_reg = (volatile uint32_t *)
> +		     (&hcor->PortRegs[le16_to_cpu(req->index) - 1].or_portsc);
> +	srclen = 0;
> +
> +	typeReq = req->request | req->requesttype << 8;
> +
> +	switch (typeReq) {
> +	case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
> +		switch (le16_to_cpu(req->value) >> 8) {
> +		case USB_DT_DEVICE:
> +			debug("USB_DT_DEVICE request\n");
> +			srcptr = &descriptor.device;
> +			srclen = 0x12;
> +			break;
> +		case USB_DT_CONFIG:
> +			debug("USB_DT_CONFIG config\n");
> +			srcptr = &descriptor.config;
> +			srclen = 0x19;
> +			break;
> +		case USB_DT_STRING:
> +			debug("USB_DT_STRING config\n");
> +			switch (le16_to_cpu(req->value) & 0xff) {
> +			case 0:	/* Language */
> +				srcptr = "\4\3\11\4";
> +				srclen = 4;
> +				break;
> +			case 1:	/* Vendor String  */
> +				srcptr = "\16\3u\0-\0b\0o\0o\0t\0";
> +				srclen = 14;
> +				break;
> +			case 2:	/* Product Name */
> +				srcptr = "\52\3X\0H\0C\0I\0 "
> +					 "\0H\0o\0s\0t\0 "
> +					 "\0C\0o\0n\0t\0r\0o\0l\0l\0e\0r\0";
> +				srclen = 42;
> +				break;
> +			default:
> +				printf("unknown value DT_STRING %x\n",
> +					le16_to_cpu(req->value));
> +				goto unknown;
> +			}
> +			break;
> +		default:
> +			printf("unknown value %x\n", le16_to_cpu(req->value));
> +			goto unknown;
> +		}
> +		break;
> +	case USB_REQ_GET_DESCRIPTOR | ((USB_DIR_IN | USB_RT_HUB) << 8):
> +		switch (le16_to_cpu(req->value) >> 8) {
> +		case USB_DT_HUB:
> +			debug("USB_DT_HUB config\n");
> +			srcptr = &descriptor.hub;
> +			srclen = 0x8;
> +			break;
> +		default:
> +			printf("unknown value %x\n", le16_to_cpu(req->value));
> +			goto unknown;
> +		}
> +		break;
> +	case USB_REQ_SET_ADDRESS | (USB_RECIP_DEVICE << 8):
> +		debug("USB_REQ_SET_ADDRESS\n");
> +		ctrl->rootdev = le16_to_cpu(req->value);
> +		break;
> +	case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
> +		/* Do nothing */
> +		break;
> +	case USB_REQ_GET_STATUS | ((USB_DIR_IN | USB_RT_HUB) << 8):
> +		tmpbuf[0] = 1;	/* USB_STATUS_SELFPOWERED */
> +		tmpbuf[1] = 0;
> +		srcptr = tmpbuf;
> +		srclen = 2;
> +		break;
> +	case USB_REQ_GET_STATUS | ((USB_RT_PORT | USB_DIR_IN) << 8):
> +		memset(tmpbuf, 0, 4);
> +		reg = xhci_readl(status_reg);
> +		if (reg & PORT_CONNECT) {
> +			tmpbuf[0] |= USB_PORT_STAT_CONNECTION;
> +			switch (reg & DEV_SPEED_MASK) {
> +			case XDEV_FS:
> +				debug("SPEED = FULLSPEED\n");
> +				break;
> +			case XDEV_LS:
> +				debug("SPEED = LOWSPEED\n");
> +				tmpbuf[1] |= USB_PORT_STAT_LOW_SPEED >> 8;
> +				break;
> +			case XDEV_HS:
> +				debug("SPEED = HIGHSPEED\n");
> +				tmpbuf[1] |= USB_PORT_STAT_HIGH_SPEED >> 8;
> +				break;
> +			case XDEV_SS:
> +				debug("SPEED = SUPERSPEED\n");
> +				tmpbuf[1] |= USB_PORT_STAT_SUPER_SPEED >> 8;
> +				break;
> +			}
> +		}
> +		if (reg & PORT_PE)
> +			tmpbuf[0] |= USB_PORT_STAT_ENABLE;
> +		if ((reg & PORT_PLS_MASK) == XDEV_U3)
> +			tmpbuf[0] |= USB_PORT_STAT_SUSPEND;
> +		if (reg & PORT_OC)
> +			tmpbuf[0] |= USB_PORT_STAT_OVERCURRENT;
> +		if (reg & PORT_RESET)
> +			tmpbuf[0] |= USB_PORT_STAT_RESET;
> +		if (reg & PORT_POWER)
> +			/*
> +			 * XXX: This Port power bit (for USB 3.0 hub)
> +			 * we are faking in USB 2.0 hub port status;
> +			 * since there's a change in bit positions in
> +			 * two:
> +			 * USB 2.0 port status PP is at position[8]
> +			 * USB 3.0 port status PP is at position[9]
> +			 * So, we are still keeping it at position [8]
> +			 */
> +			tmpbuf[1] |= USB_PORT_STAT_POWER >> 8;
> +		if (reg & PORT_CSC)
> +			tmpbuf[2] |= USB_PORT_STAT_C_CONNECTION;
> +		if (reg & PORT_PEC)
> +			tmpbuf[2] |= USB_PORT_STAT_C_ENABLE;
> +		if (reg & PORT_OCC)
> +			tmpbuf[2] |= USB_PORT_STAT_C_OVERCURRENT;
> +		if (reg & PORT_RC)
> +			tmpbuf[2] |= USB_PORT_STAT_C_RESET;
> +
> +		srcptr = tmpbuf;
> +		srclen = 4;
> +		break;
> +	case USB_REQ_SET_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
> +		reg = xhci_readl(status_reg);
> +		reg = xhci_port_state_to_neutral(reg);
> +		switch (le16_to_cpu(req->value)) {
> +		case USB_PORT_FEAT_ENABLE:
> +			reg |= PORT_PE;
> +			xhci_writel(status_reg, reg);
> +			break;
> +		case USB_PORT_FEAT_POWER:
> +			reg |= PORT_POWER;
> +			xhci_writel(status_reg, reg);
> +			break;
> +		case USB_PORT_FEAT_RESET:
> +			reg |= PORT_RESET;
> +			xhci_writel(status_reg, reg);
> +			break;
> +		default:
> +			printf("unknown feature %x\n", le16_to_cpu(req->value));
> +			goto unknown;
> +		}
> +		break;
> +	case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
> +		reg = xhci_readl(status_reg);
> +		reg = xhci_port_state_to_neutral(reg);
> +		switch (le16_to_cpu(req->value)) {
> +		case USB_PORT_FEAT_ENABLE:
> +			reg &= ~PORT_PE;
> +			break;
> +		case USB_PORT_FEAT_POWER:
> +			reg &= ~PORT_POWER;
> +			break;
> +		case USB_PORT_FEAT_C_RESET:
> +		case USB_PORT_FEAT_C_CONNECTION:
> +		case USB_PORT_FEAT_C_OVER_CURRENT:
> +		case USB_PORT_FEAT_C_ENABLE:
> +			xhci_clear_port_change_bit((le16_to_cpu(req->value)),
> +							le16_to_cpu(req->index),
> +							status_reg, reg);
> +			break;
> +		default:
> +			printf("unknown feature %x\n", le16_to_cpu(req->value));
> +			goto unknown;
> +		}
> +		xhci_writel(status_reg, reg);
> +		break;
> +	default:
> +		printf("Unknown request\n");
> +		goto unknown;
> +	}
> +
> +	debug("scrlen = %d\n req->length = %d\n",
> +		srclen, le16_to_cpu(req->length));
> +
> +	len = min(srclen, le16_to_cpu(req->length));
> +
> +	if (srcptr != NULL && len > 0)
> +		memcpy(buffer, srcptr, len);
> +	else
> +		debug("Len is 0\n");
> +
> +	udev->act_len = len;
> +	udev->status = 0;
> +
> +	return 0;
> +
> +unknown:
> +	udev->act_len = 0;
> +	udev->status = USB_ST_STALLED;
> +
> +	return -1;
> +}
> +
> +/**
> + * Submits the INT request to XHCI Host cotroller
> + *
> + * @param udev	pointer to the USB device
> + * @param pipe		contains the DIR_IN or OUT , devnum
> + * @param buffer	buffer to be read/written based on the request
> + * @param length	length of the buffer
> + * @param interval	interval of the interrupt
> + * @return 0
> + */
> +int
> +submit_int_msg(struct usb_device *udev, unsigned long pipe, void *buffer,
> +						int length, int interval)
> +{
> +	/*
> +	 * TODO: Not addressing any interrupt type transfer requests
> +	 * Add support for it later.
> +	 */
> +	return -1;
> +}
> +
> +/**
> + * submit the BULK type of request to the USB Device
> + *
> + * @param udev	pointer to the USB device
> + * @param pipe		contains the DIR_IN or OUT , devnum
> + * @param buffer	buffer to be read/written based on the request
> + * @param length	length of the buffer
> + * @return returns 0 if successful else -1 on failure
> + */
> +int
> +submit_bulk_msg(struct usb_device *udev, unsigned long pipe, void *buffer,
> +								int length)
> +{
> +	if (usb_pipetype(pipe) != PIPE_BULK) {
> +		printf("non-bulk pipe (type=%lu)", usb_pipetype(pipe));
> +		return -1;
> +	}
> +
> +	return xhci_bulk_tx(udev, pipe, length, buffer);
> +}
> +
> +/**
> + * submit the control type of request to the Root hub/Device based on the devnum
> + *
> + * @param udev	pointer to the USB device
> + * @param pipe		contains the DIR_IN or OUT , devnum
> + * @param buffer	buffer to be read/written based on the request
> + * @param length	length of the buffer
> + * @param setup		Request type
> + * @return returns 0 if successful else -1 on failure
> + */
> +int
> +submit_control_msg(struct usb_device *udev, unsigned long pipe, void *buffer,
> +					int length, struct devrequest *setup)
> +{
> +	struct xhci_ctrl *ctrl = udev->controller;
> +	int ret = 0;
> +
> +	if (usb_pipetype(pipe) != PIPE_CONTROL) {
> +		printf("non-control pipe (type=%lu)", usb_pipetype(pipe));
> +		return -1;
> +	}
> +
> +	if (usb_pipedevice(pipe) == ctrl->rootdev)
> +		return xhci_submit_root(udev, pipe, buffer, setup);
> +
> +	if (setup->request == USB_REQ_SET_ADDRESS)
> +		return xhci_address_device(udev);
> +
> +	if (setup->request == USB_REQ_SET_CONFIGURATION) {
> +		ret = xhci_set_configuration(udev);
> +		if (ret) {
> +			printf("Failed to configure xHC endpoint\n");

Use puts when there is no args.  Also s/xHC/xHCI

> +			return ret;
> +		}
> +	}
> +
> +	return xhci_ctrl_tx(udev, pipe, setup, length, buffer);
> +}
> +
> +/**
> + * Intialises the XHCI host controller
> + * and allocates the necessary data structures
> + *
> + * @param index	index to the host controller data structure
> + * @return pointer to the intialised controller
> + */
> +int usb_lowlevel_init(int index, void **controller)
> +{
> +	uint32_t val;
> +	uint32_t val2;
> +	uint32_t reg;
> +	struct xhci_hccr *hccr;
> +	struct xhci_hcor *hcor;
> +	struct xhci_ctrl *ctrl;
> +
> +	if (xhci_hcd_init(index, &hccr, (struct xhci_hcor **)&hcor) != 0)
> +		return -ENODEV;
> +
> +	if (xhci_reset(hcor) != 0)
> +		return -ENODEV;
> +
> +	ctrl = &xhcic[index];
> +
> +	ctrl->hccr = hccr;
> +	ctrl->hcor = hcor;
> +
> +	/*
> +	 * Program the Number of Device Slots Enabled field in the CONFIG
> +	 * register with the max value of slots the HC can handle.
> +	 */
> +	val = (xhci_readl(&hccr->cr_hcsparams1) & HCS_SLOTS_MASK);
> +	val2 = xhci_readl(&hcor->or_config);
> +	val |= (val2 & ~HCS_SLOTS_MASK);
> +	xhci_writel(&hcor->or_config, val);
> +
> +	/* initializing xhci data structures */
> +	if (xhci_mem_init(ctrl, hccr, hcor) < 0)
> +		return -ENOMEM;
> +
> +	reg = xhci_readl(&hccr->cr_hcsparams1);
> +	descriptor.hub.bNbrPorts = ((reg & HCS_MAX_PORTS_MASK) >>
> +						HCS_MAX_PORTS_SHIFT);
> +	printf("Register %x NbrPorts %d\n", reg, descriptor.hub.bNbrPorts);

Nitpick maybe make this debug.

> +
> +	/* Port Indicators */
> +	reg = xhci_readl(&hccr->cr_hccparams);
> +	if (HCS_INDICATOR(reg))
> +		put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics)
> +				| 0x80, &descriptor.hub.wHubCharacteristics);
> +
> +	/* Port Power Control */
> +	if (HCC_PPC(reg))
> +		put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics)
> +				| 0x01, &descriptor.hub.wHubCharacteristics);
> +
> +	if (xhci_start(hcor)) {
> +		xhci_reset(hcor);
> +		return -ENODEV;
> +	}
> +
> +	/* Zero'ing IRQ control register and IRQ pending register */
> +	xhci_writel(&ctrl->ir_set->irq_control, 0x0);
> +	xhci_writel(&ctrl->ir_set->irq_pending, 0x0);
> +
> +	reg = HC_VERSION(xhci_readl(&hccr->cr_capbase));
> +	printf("USB XHCI %x.%02x\n", reg >> 8, reg & 0xff);
> +
> +	*controller = &xhcic[index];
> +
> +	return 0;
> +}
> +
> +/**
> + * Stops the XHCI host controller
> + * and cleans up all the related data structures
> + *
> + * @param index	index to the host controller data structure
> + * @return none
> + */
> +int usb_lowlevel_stop(int index)
> +{
> +	struct xhci_ctrl *ctrl = (xhcic + index);
> +	u32 temp;
> +
> +	xhci_reset(ctrl->hcor);
> +
> +	debug("// Disabling event ring interrupts\n");
> +	temp = xhci_readl(&ctrl->hcor->or_usbsts);
> +	xhci_writel(&ctrl->hcor->or_usbsts, temp & ~STS_EINT);
> +	temp = xhci_readl(&ctrl->ir_set->irq_pending);
> +	xhci_writel(&ctrl->ir_set->irq_pending, ER_IRQ_DISABLE(temp));
> +
> +	xhci_hcd_stop(index);
> +
> +	xhci_cleanup(ctrl);
> +
> +	return 0;
> +}
> diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
> new file mode 100644
> index 0000000..467afe0
> --- /dev/null
> +++ b/drivers/usb/host/xhci.h
> @@ -0,0 +1,1280 @@
> +/*
> + * USB HOST XHCI Controller
> + *
> + * Copyright (C) 2013 Samsung Electronics Co.Ltd
> + *	Vivek Gautam <gautam.vivek@samsung.com>
> + *	Vikas Sajjan <vikas.sajjan@samsung.com>
> + *
> + * Based on xHCI host controller driver in linux-kernel
> + * by Sarah Sharp.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301 USA
> + */
> +

Needs new SPDX license.

* SPDX-License-Identifier:	GPL-2.0+


> +#ifndef HOST_XHCI_H_
> +#define HOST_XHCI_H_
> +
> +#include <asm/cache.h>
> +#include <linux/list.h>
> +
> +/* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
> +#define DeviceRequest \
> +	((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE) << 8)
> +
> +#define DeviceOutRequest \
> +	((USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE) << 8)
> +
> +#define InterfaceRequest \
> +	((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8)
> +
> +#define EndpointRequest \
> +	((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8)
> +
> +#define EndpointOutRequest \
> +	((USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8)
> +
> +#define upper_32_bits(n) (u32)(((n) >> 32))
> +#define lower_32_bits(n) (u32)(n)
> +
> +#define MAX_EP_CTX_NUM		31
> +#define XHCI_ALIGNMENT		64
> +/* Generic timeout for XHCI events */
> +#define XHCI_TIMEOUT		5000
> +/* Max number of USB devices for any host controller - limit in section 6.1 */
> +#define MAX_HC_SLOTS            256
> +/* Section 5.3.3 - MaxPorts */
> +#define MAX_HC_PORTS            127
> +
> +/* Up to 16 ms to halt an HC */
> +#define XHCI_MAX_HALT_USEC	(16*1000)
> +
> +#define XHCI_MAX_RESET_USEC	(250*1000)
> +
> +/*
> + * These bits are Read Only (RO) and should be saved and written to the
> + * registers: 0, 3, 10:13, 30
> + * connect status, over-current status, port speed, and device removable.
> + * connect status and port speed are also sticky - meaning they're in
> + * the AUX well and they aren't changed by a hot, warm, or cold reset.
> + */
> +#define XHCI_PORT_RO ((1 << 0) | (1 << 3) | (0xf << 10) | (1 << 30))
> +/*
> + * These bits are RW; writing a 0 clears the bit, writing a 1 sets the bit:
> + * bits 5:8, 9, 14:15, 25:27
> + * link state, port power, port indicator state, "wake on" enable state
> + */
> +#define XHCI_PORT_RWS ((0xf << 5) | (1 << 9) | (0x3 << 14) | (0x7 << 25))
> +/*
> + * These bits are RW; writing a 1 sets the bit, writing a 0 has no effect:
> + * bit 4 (port reset)
> + */
> +#define XHCI_PORT_RW1S ((1 << 4))
> +/*
> + * These bits are RW; writing a 1 clears the bit, writing a 0 has no effect:
> + * bits 1, 17, 18, 19, 20, 21, 22, 23
> + * port enable/disable, and
> + * change bits: connect, PED,
> + * warm port reset changed (reserved zero for USB 2.0 ports),
> + * over-current, reset, link state, and L1 change
> + */
> +#define XHCI_PORT_RW1CS ((1 << 1) | (0x7f << 17))
> +/*
> + * Bit 16 is RW, and writing a '1' to it causes the link state control to be
> + * latched in
> + */
> +#define XHCI_PORT_RW ((1 << 16))
> +/*
> + * These bits are Reserved Zero (RsvdZ) and zero should be written to them:
> + * bits 2, 24, 28:31
> + */
> +#define XHCI_PORT_RZ ((1 << 2) | (1 << 24) | (0xf << 28))
> +
> +/*
> + * XHCI Register Space.
> + */
> +struct xhci_hccr {
> +	uint32_t cr_capbase;
> +	uint32_t cr_hcsparams1;
> +	uint32_t cr_hcsparams2;
> +	uint32_t cr_hcsparams3;
> +	uint32_t cr_hccparams;
> +	uint32_t cr_dboff;
> +	uint32_t cr_rtsoff;
> +
> +/* hc_capbase bitmasks */
> +/* bits 7:0 - how long is the Capabilities register */
> +#define HC_LENGTH(p)		XHCI_HC_LENGTH(p)
> +/* bits 31:16	*/
> +#define HC_VERSION(p)		(((p) >> 16) & 0xffff)
> +
> +/* HCSPARAMS1 - hcs_params1 - bitmasks */
> +/* bits 0:7, Max Device Slots */
> +#define HCS_MAX_SLOTS(p)	(((p) >> 0) & 0xff)
> +#define HCS_SLOTS_MASK		0xff
> +/* bits 8:18, Max Interrupters */
> +#define HCS_MAX_INTRS(p)	(((p) >> 8) & 0x7ff)
> +/* bits 24:31, Max Ports - max value is 0x7F = 127 ports */
> +#define HCS_MAX_PORTS_SHIFT	24
> +#define HCS_MAX_PORTS_MASK	(0x7f << HCS_MAX_PORTS_SHIFT)
> +#define HCS_MAX_PORTS(p)	(((p) >> 24) & 0x7f)
> +
> +/* HCSPARAMS2 - hcs_params2 - bitmasks */
> +/* bits 0:3, frames or uframes that SW needs to queue transactions
> + * ahead of the HW to meet periodic deadlines */
> +#define HCS_IST(p)		(((p) >> 0) & 0xf)
> +/* bits 4:7, max number of Event Ring segments */
> +#define HCS_ERST_MAX(p)		(((p) >> 4) & 0xf)
> +/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
> +/* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */
> +#define HCS_MAX_SCRATCHPAD(p)   (((p) >> 27) & 0x1f)
> +
> +/* HCSPARAMS3 - hcs_params3 - bitmasks */
> +/* bits 0:7, Max U1 to U0 latency for the roothub ports */
> +#define HCS_U1_LATENCY(p)	(((p) >> 0) & 0xff)
> +/* bits 16:31, Max U2 to U0 latency for the roothub ports */
> +#define HCS_U2_LATENCY(p)	(((p) >> 16) & 0xffff)
> +
> +/* HCCPARAMS - hcc_params - bitmasks */
> +/* true: HC can use 64-bit address pointers */
> +#define HCC_64BIT_ADDR(p)	((p) & (1 << 0))
> +/* true: HC can do bandwidth negotiation */
> +#define HCC_BANDWIDTH_NEG(p)	((p) & (1 << 1))
> +/* true: HC uses 64-byte Device Context structures
> + * FIXME 64-byte context structures aren't supported yet.
> + */
> +#define HCC_64BYTE_CONTEXT(p)	((p) & (1 << 2))
> +/* true: HC has port power switches */
> +#define HCC_PPC(p)		((p) & (1 << 3))
> +/* true: HC has port indicators */
> +#define HCS_INDICATOR(p)	((p) & (1 << 4))
> +/* true: HC has Light HC Reset Capability */
> +#define HCC_LIGHT_RESET(p)	((p) & (1 << 5))
> +/* true: HC supports latency tolerance messaging */
> +#define HCC_LTC(p)		((p) & (1 << 6))
> +/* true: no secondary Stream ID Support */
> +#define HCC_NSS(p)		((p) & (1 << 7))
> +/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */
> +#define HCC_MAX_PSA(p)		(1 << ((((p) >> 12) & 0xf) + 1))
> +/* Extended Capabilities pointer from PCI base - section 5.3.6 */
> +#define HCC_EXT_CAPS(p)		XHCI_HCC_EXT_CAPS(p)
> +
> +/* db_off bitmask - bits 0:1 reserved */
> +#define	DBOFF_MASK	(~0x3)
> +
> +/* run_regs_off bitmask - bits 0:4 reserved */
> +#define	RTSOFF_MASK	(~0x1f)
> +
> +};
> +
> +struct xhci_hcor_portRegss {
> +	volatile uint32_t or_portsc;
> +	volatile uint32_t or_portpmsc;
> +	volatile uint32_t or_portli;
> +	volatile uint32_t reserved_3;
> +};
> +
> +struct xhci_hcor {
> +	volatile uint32_t or_usbcmd;
> +	volatile uint32_t or_usbsts;
> +	volatile uint32_t or_pagesize;
> +	volatile uint32_t reserved_0[2];
> +	volatile uint32_t or_dnctrl;
> +	volatile uint64_t or_crcr;
> +	volatile uint32_t reserved_1[4];
> +	volatile uint64_t or_dcbaap;
> +	volatile uint32_t or_config;
> +	volatile uint32_t reserved_2[241];
> +	struct xhci_hcor_portRegss PortRegs[CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS];
> +
> +	uint32_t reserved_4[CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS * 254];
> +};
> +
> +/* USBCMD - USB command - command bitmasks */
> +/* start/stop HC execution - do not write unless HC is halted*/
> +#define CMD_RUN		XHCI_CMD_RUN
> +/* Reset HC - resets internal HC state machine and all registers (except
> + * PCI config regs).  HC does NOT drive a USB reset on the downstream ports.
> + * The xHCI driver must reinitialize the xHC after setting this bit.
> + */
> +#define CMD_RESET	(1 << 1)
> +/* Event Interrupt Enable - a '1' allows interrupts from the host controller */
> +#define CMD_EIE		XHCI_CMD_EIE
> +/* Host System Error Interrupt Enable - get out-of-band signal for HC errors */
> +#define CMD_HSEIE	XHCI_CMD_HSEIE
> +/* bits 4:6 are reserved (and should be preserved on writes). */
> +/* light reset (port status stays unchanged) - reset completed when this is 0 */
> +#define CMD_LRESET	(1 << 7)
> +/* host controller save/restore state. */
> +#define CMD_CSS		(1 << 8)
> +#define CMD_CRS		(1 << 9)
> +/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
> +#define CMD_EWE		XHCI_CMD_EWE
> +/* MFINDEX power management - '1' means xHC can stop MFINDEX counter if all root
> + * hubs are in U3 (selective suspend), disconnect, disabled, or powered-off.
> + * '0' means the xHC can power it off if all ports are in the disconnect,
> + * disabled, or powered-off state.
> + */
> +#define CMD_PM_INDEX	(1 << 11)
> +/* bits 12:31 are reserved (and should be preserved on writes). */
> +
> +/* USBSTS - USB status - status bitmasks */
> +/* HC not running - set to 1 when run/stop bit is cleared. */
> +#define STS_HALT	XHCI_STS_HALT
> +/* serious error, e.g. PCI parity error.  The HC will clear the run/stop bit. */
> +#define STS_FATAL	(1 << 2)
> +/* event interrupt - clear this prior to clearing any IP flags in IR set*/
> +#define STS_EINT	(1 << 3)
> +/* port change detect */
> +#define STS_PORT	(1 << 4)
> +/* bits 5:7 reserved and zeroed */
> +/* save state status - '1' means xHC is saving state */
> +#define STS_SAVE	(1 << 8)
> +/* restore state status - '1' means xHC is restoring state */
> +#define STS_RESTORE	(1 << 9)
> +/* true: save or restore error */
> +#define STS_SRE		(1 << 10)
> +/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
> +#define STS_CNR		XHCI_STS_CNR
> +/* true: internal Host Controller Error - SW needs to reset and reinitialize */
> +#define STS_HCE		(1 << 12)
> +/* bits 13:31 reserved and should be preserved */
> +
> +/*
> + * DNCTRL - Device Notification Control Register - dev_notification bitmasks
> + * Generate a device notification event when the HC sees a transaction with a
> + * notification type that matches a bit set in this bit field.
> + */
> +#define	DEV_NOTE_MASK		(0xffff)
> +#define ENABLE_DEV_NOTE(x)	(1 << (x))
> +/* Most of the device notification types should only be used for debug.
> + * SW does need to pay attention to function wake notifications.
> + */
> +#define	DEV_NOTE_FWAKE		ENABLE_DEV_NOTE(1)
> +
> +/* CRCR - Command Ring Control Register - cmd_ring bitmasks */
> +/* bit 0 is the command ring cycle state */
> +/* stop ring operation after completion of the currently executing command */
> +#define CMD_RING_PAUSE		(1 << 1)
> +/* stop ring immediately - abort the currently executing command */
> +#define CMD_RING_ABORT		(1 << 2)
> +/* true: command ring is running */
> +#define CMD_RING_RUNNING	(1 << 3)
> +/* bits 4:5 reserved and should be preserved */
> +/* Command Ring pointer - bit mask for the lower 32 bits. */
> +#define CMD_RING_RSVD_BITS	(0x3f)
> +
> +/* CONFIG - Configure Register - config_reg bitmasks */
> +/* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */
> +#define MAX_DEVS(p)	((p) & 0xff)
> +/* bits 8:31 - reserved and should be preserved */
> +
> +/* PORTSC - Port Status and Control Register - port_status_base bitmasks */
> +/* true: device connected */
> +#define PORT_CONNECT	(1 << 0)
> +/* true: port enabled */
> +#define PORT_PE		(1 << 1)
> +/* bit 2 reserved and zeroed */
> +/* true: port has an over-current condition */
> +#define PORT_OC		(1 << 3)
> +/* true: port reset signaling asserted */
> +#define PORT_RESET	(1 << 4)
> +/* Port Link State - bits 5:8
> + * A read gives the current link PM state of the port,
> + * a write with Link State Write Strobe set sets the link state.
> + */
> +#define PORT_PLS_MASK	(0xf << 5)
> +#define XDEV_U0		(0x0 << 5)
> +#define XDEV_U2		(0x2 << 5)
> +#define XDEV_U3		(0x3 << 5)
> +#define XDEV_RESUME	(0xf << 5)
> +/* true: port has power (see HCC_PPC) */
> +#define PORT_POWER	(1 << 9)
> +/* bits 10:13 indicate device speed:
> + * 0 - undefined speed - port hasn't be initialized by a reset yet
> + * 1 - full speed
> + * 2 - low speed
> + * 3 - high speed
> + * 4 - super speed
> + * 5-15 reserved
> + */
> +#define DEV_SPEED_MASK		(0xf << 10)
> +#define	XDEV_FS			(0x1 << 10)
> +#define	XDEV_LS			(0x2 << 10)
> +#define	XDEV_HS			(0x3 << 10)
> +#define	XDEV_SS			(0x4 << 10)
> +#define DEV_UNDEFSPEED(p)	(((p) & DEV_SPEED_MASK) == (0x0<<10))
> +#define DEV_FULLSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_FS)
> +#define DEV_LOWSPEED(p)		(((p) & DEV_SPEED_MASK) == XDEV_LS)
> +#define DEV_HIGHSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_HS)
> +#define DEV_SUPERSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_SS)
> +/* Bits 20:23 in the Slot Context are the speed for the device */
> +#define	SLOT_SPEED_FS		(XDEV_FS << 10)
> +#define	SLOT_SPEED_LS		(XDEV_LS << 10)
> +#define	SLOT_SPEED_HS		(XDEV_HS << 10)
> +#define	SLOT_SPEED_SS		(XDEV_SS << 10)
> +/* Port Indicator Control */
> +#define PORT_LED_OFF	(0 << 14)
> +#define PORT_LED_AMBER	(1 << 14)
> +#define PORT_LED_GREEN	(2 << 14)
> +#define PORT_LED_MASK	(3 << 14)
> +/* Port Link State Write Strobe - set this when changing link state */
> +#define PORT_LINK_STROBE	(1 << 16)
> +/* true: connect status change */
> +#define PORT_CSC	(1 << 17)
> +/* true: port enable change */
> +#define PORT_PEC	(1 << 18)
> +/* true: warm reset for a USB 3.0 device is done.  A "hot" reset puts the port
> + * into an enabled state, and the device into the default state.  A "warm" reset
> + * also resets the link, forcing the device through the link training sequence.
> + * SW can also look at the Port Reset register to see when warm reset is done.
> + */
> +#define PORT_WRC	(1 << 19)
> +/* true: over-current change */
> +#define PORT_OCC	(1 << 20)
> +/* true: reset change - 1 to 0 transition of PORT_RESET */
> +#define PORT_RC		(1 << 21)
> +/* port link status change - set on some port link state transitions:
> + *  Transition				Reason
> + *  --------------------------------------------------------------------------
> + *  - U3 to Resume		Wakeup signaling from a device
> + *  - Resume to Recovery to U0	USB 3.0 device resume
> + *  - Resume to U0		USB 2.0 device resume
> + *  - U3 to Recovery to U0	Software resume of USB 3.0 device complete
> + *  - U3 to U0			Software resume of USB 2.0 device complete
> + *  - U2 to U0			L1 resume of USB 2.1 device complete
> + *  - U0 to U0 (???)		L1 entry rejection by USB 2.1 device
> + *  - U0 to disabled		L1 entry error with USB 2.1 device
> + *  - Any state to inactive	Error on USB 3.0 port
> + */
> +#define PORT_PLC	(1 << 22)
> +/* port configure error change - port failed to configure its link partner */
> +#define PORT_CEC	(1 << 23)
> +/* bit 24 reserved */
> +/* wake on connect (enable) */
> +#define PORT_WKCONN_E	(1 << 25)
> +/* wake on disconnect (enable) */
> +#define PORT_WKDISC_E	(1 << 26)
> +/* wake on over-current (enable) */
> +#define PORT_WKOC_E	(1 << 27)
> +/* bits 28:29 reserved */
> +/* true: device is removable - for USB 3.0 roothub emulation */
> +#define PORT_DEV_REMOVE	(1 << 30)
> +/* Initiate a warm port reset - complete when PORT_WRC is '1' */
> +#define PORT_WR		(1 << 31)
> +
> +/* We mark duplicate entries with -1 */
> +#define DUPLICATE_ENTRY ((u8)(-1))
> +
> +/* Port Power Management Status and Control - port_power_base bitmasks */
> +/* Inactivity timer value for transitions into U1, in microseconds.
> + * Timeout can be up to 127us.  0xFF means an infinite timeout.
> + */
> +#define PORT_U1_TIMEOUT(p)	((p) & 0xff)
> +/* Inactivity timer value for transitions into U2 */
> +#define PORT_U2_TIMEOUT(p)	(((p) & 0xff) << 8)
> +/* Bits 24:31 for port testing */
> +
> +/* USB2 Protocol PORTSPMSC */
> +#define	PORT_L1S_MASK		7
> +#define	PORT_L1S_SUCCESS	1
> +#define	PORT_RWE		(1 << 3)
> +#define	PORT_HIRD(p)		(((p) & 0xf) << 4)
> +#define	PORT_HIRD_MASK		(0xf << 4)
> +#define	PORT_L1DS(p)		(((p) & 0xff) << 8)
> +#define	PORT_HLE		(1 << 16)
> +
> +/**
> +* struct xhci_intr_reg - Interrupt Register Set
> +* @irq_pending:	IMAN - Interrupt Management Register.  Used to enable
> +*			interrupts and check for pending interrupts.
> +* @irq_control:	IMOD - Interrupt Moderation Register.
> +*			Used to throttle interrupts.
> +* @erst_size:		Number of segments in the
> +			Event Ring Segment Table (ERST).
> +* @erst_base:		ERST base address.
> +* @erst_dequeue:	Event ring dequeue pointer.
> +*
> +* Each interrupter (defined by a MSI-X vector) has an event ring and an Event
> +* Ring Segment Table (ERST) associated with it.
> +* The event ring is comprised of  multiple segments of the same size.
> +* The HC places events on the ring and  "updates the Cycle bit in the TRBs to
> +* indicate to software the current  position of the Enqueue Pointer."
> +* The HCD (Linux) processes those events and  updates the dequeue pointer.
> +*/
> +struct xhci_intr_reg {
> +	volatile __le32	irq_pending;
> +	volatile __le32	irq_control;
> +	volatile __le32	erst_size;
> +	volatile __le32	rsvd;
> +	volatile __le64	erst_base;
> +	volatile __le64	erst_dequeue;
> +};
> +
> +/* irq_pending bitmasks */
> +#define	ER_IRQ_PENDING(p)	((p) & 0x1)
> +/* bits 2:31 need to be preserved */
> +/* THIS IS BUGGY - FIXME - IP IS WRITE 1 TO CLEAR */
> +#define	ER_IRQ_CLEAR(p)		((p) & 0xfffffffe)
> +#define	ER_IRQ_ENABLE(p)	((ER_IRQ_CLEAR(p)) | 0x2)
> +#define	ER_IRQ_DISABLE(p)	((ER_IRQ_CLEAR(p)) & ~(0x2))
> +
> +/* irq_control bitmasks */
> +/* Minimum interval between interrupts (in 250ns intervals).  The interval
> + * between interrupts will be longer if there are no events on the event ring.
> + * Default is 4000 (1 ms).
> + */
> +#define ER_IRQ_INTERVAL_MASK	(0xffff)
> +/* Counter used to count down the time to the next interrupt - HW use only */
> +#define ER_IRQ_COUNTER_MASK	(0xffff << 16)
> +
> +/* erst_size bitmasks */
> +/* Preserve bits 16:31 of erst_size */
> +#define	ERST_SIZE_MASK		(0xffff << 16)
> +
> +/* erst_dequeue bitmasks */
> +/* Dequeue ERST Segment Index (DESI) - Segment number (or alias)
> + * where the current dequeue pointer lies.  This is an optional HW hint.
> + */
> +#define ERST_DESI_MASK		(0x7)
> +/* Event Handler Busy (EHB) - is the event ring scheduled to be serviced by
> + * a work queue (or delayed service routine)?
> + */
> +#define ERST_EHB		(1 << 3)
> +#define ERST_PTR_MASK		(0xf)
> +
> +/**
> + * struct xhci_run_regs
> + * @microframe_index:	MFINDEX - current microframe number
> + *
> + * Section 5.5 Host Controller Runtime Registers:
> + * "Software should read and write these registers using only Dword (32 bit)
> + * or larger accesses"
> + */
> +struct xhci_run_regs {
> +	__le32			microframe_index;
> +	__le32			rsvd[7];
> +	struct xhci_intr_reg	ir_set[128];
> +};
> +
> +/**
> + * struct doorbell_array
> + *
> + * Bits  0 -  7: Endpoint target
> + * Bits  8 - 15: RsvdZ
> + * Bits 16 - 31: Stream ID
> + *
> + * Section 5.6
> + */
> +struct xhci_doorbell_array {
> +	volatile __le32	doorbell[256];
> +};
> +
> +#define DB_VALUE(ep, stream)	((((ep) + 1) & 0xff) | ((stream) << 16))
> +#define DB_VALUE_HOST		0x00000000
> +
> +/**
> + * struct xhci_protocol_caps
> + * @revision:		major revision, minor revision, capability ID,
> + *			and next capability pointer.
> + * @name_string:	Four ASCII characters to say which spec this xHC
> + *			follows, typically "USB ".
> + * @port_info:		Port offset, count, and protocol-defined information.
> + */
> +struct xhci_protocol_caps {
> +	u32	revision;
> +	u32	name_string;
> +	u32	port_info;
> +};
> +
> +#define	XHCI_EXT_PORT_MAJOR(x)	(((x) >> 24) & 0xff)
> +#define	XHCI_EXT_PORT_OFF(x)	((x) & 0xff)
> +#define	XHCI_EXT_PORT_COUNT(x)	(((x) >> 8) & 0xff)
> +
> +/**
> + * struct xhci_container_ctx
> + * @type: Type of context.  Used to calculated offsets to contained contexts.
> + * @size: Size of the context data
> + * @bytes: The raw context data given to HW
> + * @dma: dma address of the bytes
> + *
> + * Represents either a Device or Input context.  Holds a pointer to the raw
> + * memory used for the context (bytes) and dma address of it (dma).
> + */
> +struct xhci_container_ctx {
> +	unsigned type;
> +#define XHCI_CTX_TYPE_DEVICE  0x1
> +#define XHCI_CTX_TYPE_INPUT   0x2
> +
> +	int size;
> +	u8 *bytes;
> +};
> +
> +/**
> + * struct xhci_slot_ctx
> + * @dev_info:	Route string, device speed, hub info, and last valid endpoint
> + * @dev_info2:	Max exit latency for device number, root hub port number
> + * @tt_info:	tt_info is used to construct split transaction tokens
> + * @dev_state:	slot state and device address
> + *
> + * Slot Context - section 6.2.1.1.  This assumes the HC uses 32-byte context
> + * structures.  If the HC uses 64-byte contexts, there is an additional 32 bytes
> + * reserved at the end of the slot context for HC internal use.
> + */
> +struct xhci_slot_ctx {
> +	__le32	dev_info;
> +	__le32	dev_info2;
> +	__le32	tt_info;
> +	__le32	dev_state;
> +	/* offset 0x10 to 0x1f reserved for HC internal use */
> +	__le32	reserved[4];
> +};
> +
> +/* dev_info bitmasks */
> +/* Route String - 0:19 */
> +#define ROUTE_STRING_MASK	(0xfffff)
> +/* Device speed - values defined by PORTSC Device Speed field - 20:23 */
> +#define DEV_SPEED		(0xf << 20)
> +/* bit 24 reserved */
> +/* Is this LS/FS device connected through a HS hub? - bit 25 */
> +#define DEV_MTT			(0x1 << 25)
> +/* Set if the device is a hub - bit 26 */
> +#define DEV_HUB			(0x1 << 26)
> +/* Index of the last valid endpoint context in this device context - 27:31 */
> +#define LAST_CTX_MASK		(0x1f << 27)
> +#define LAST_CTX(p)		((p) << 27)
> +#define LAST_CTX_TO_EP_NUM(p)	(((p) >> 27) - 1)
> +#define SLOT_FLAG		(1 << 0)
> +#define EP0_FLAG		(1 << 1)
> +
> +/* dev_info2 bitmasks */
> +/* Max Exit Latency (ms) - worst case time to wake up all links in dev path */
> +#define MAX_EXIT			(0xffff)
> +/* Root hub port number that is needed to access the USB device */
> +#define ROOT_HUB_PORT(p)		(((p) & 0xff) << 16)
> +#define ROOT_HUB_PORT_MASK		(0xff)
> +#define ROOT_HUB_PORT_SHIFT		(16)
> +#define DEVINFO_TO_ROOT_HUB_PORT(p)	(((p) >> 16) & 0xff)
> +/* Maximum number of ports under a hub device */
> +#define XHCI_MAX_PORTS(p)		(((p) & 0xff) << 24)
> +
> +/* tt_info bitmasks */
> +/*
> + * TT Hub Slot ID - for low or full speed devices attached to a high-speed hub
> + * The Slot ID of the hub that isolates the high speed signaling from
> + * this low or full-speed device.  '0' if attached to root hub port.
> + */
> +#define TT_SLOT			(0xff)
> +/*
> + * The number of the downstream facing port of the high-speed hub
> + * '0' if the device is not low or full speed.
> + */
> +#define TT_PORT			(0xff << 8)
> +#define TT_THINK_TIME(p)	(((p) & 0x3) << 16)
> +
> +/* dev_state bitmasks */
> +/* USB device address - assigned by the HC */
> +#define DEV_ADDR_MASK	(0xff)
> +/* bits 8:26 reserved */
> +/* Slot state */
> +#define SLOT_STATE		(0x1f << 27)
> +#define GET_SLOT_STATE(p)	(((p) & (0x1f << 27)) >> 27)
> +
> +#define SLOT_STATE_DISABLED	0
> +#define SLOT_STATE_ENABLED	SLOT_STATE_DISABLED
> +#define SLOT_STATE_DEFAULT	1
> +#define SLOT_STATE_ADDRESSED	2
> +#define SLOT_STATE_CONFIGURED	3
> +
> +/**
> + * struct xhci_ep_ctx
> + * @ep_info:	endpoint state, streams, mult, and interval information.
> + * @ep_info2:	information on endpoint type, max packet size, max burst size,
> + *		error count, and whether the HC will force an event for all
> + *		transactions.
> + * @deq:	64-bit ring dequeue pointer address.  If the endpoint only
> + *		defines one stream, this points to the endpoint transfer ring.
> + *		Otherwise, it points to a stream context array, which has a
> + *		ring pointer for each flow.
> + * @tx_info:
> + *		Average TRB lengths for the endpoint ring and
> + *		max payload within an Endpoint Service Interval Time (ESIT).
> + *
> + * Endpoint Context - section 6.2.1.2.This assumes the HC uses 32-byte context
> + * structures.If the HC uses 64-byte contexts, there is an additional 32 bytes
> + * reserved at the end of the endpoint context for HC internal use.
> + */
> +struct xhci_ep_ctx {
> +	__le32	ep_info;
> +	__le32	ep_info2;
> +	__le64	deq;
> +	__le32	tx_info;
> +	/* offset 0x14 - 0x1f reserved for HC internal use */
> +	__le32	reserved[3];
> +};
> +
> +/* ep_info bitmasks */
> +/*
> + * Endpoint State - bits 0:2
> + * 0 - disabled
> + * 1 - running
> + * 2 - halted due to halt condition - ok to manipulate endpoint ring
> + * 3 - stopped
> + * 4 - TRB error
> + * 5-7 - reserved
> + */
> +#define EP_STATE_MASK		(0xf)
> +#define EP_STATE_DISABLED	0
> +#define EP_STATE_RUNNING	1
> +#define EP_STATE_HALTED		2
> +#define EP_STATE_STOPPED	3
> +#define EP_STATE_ERROR		4
> +/* Mult - Max number of burtst within an interval, in EP companion desc. */
> +#define EP_MULT(p)		(((p) & 0x3) << 8)
> +#define CTX_TO_EP_MULT(p)	(((p) >> 8) & 0x3)
> +/* bits 10:14 are Max Primary Streams */
> +/* bit 15 is Linear Stream Array */
> +/* Interval - period between requests to an endpoint - 125u increments. */
> +#define EP_INTERVAL(p)			(((p) & 0xff) << 16)
> +#define EP_INTERVAL_TO_UFRAMES(p)	(1 << (((p) >> 16) & 0xff))
> +#define CTX_TO_EP_INTERVAL(p)		(((p) >> 16) & 0xff)
> +#define EP_MAXPSTREAMS_MASK		(0x1f << 10)
> +#define EP_MAXPSTREAMS(p)		(((p) << 10) & EP_MAXPSTREAMS_MASK)
> +/* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */
> +#define	EP_HAS_LSA			(1 << 15)
> +
> +/* ep_info2 bitmasks */
> +/*
> + * Force Event - generate transfer events for all TRBs for this endpoint
> + * This will tell the HC to ignore the IOC and ISP flags (for debugging only).
> + */
> +#define	FORCE_EVENT		(0x1)
> +#define ERROR_COUNT(p)		(((p) & 0x3) << 1)
> +#define ERROR_COUNT_SHIFT	(1)
> +#define ERROR_COUNT_MASK	(0x3)
> +#define CTX_TO_EP_TYPE(p)	(((p) >> 3) & 0x7)
> +#define EP_TYPE(p)		((p) << 3)
> +#define EP_TYPE_SHIFT		(3)
> +#define ISOC_OUT_EP		1
> +#define BULK_OUT_EP		2
> +#define INT_OUT_EP		3
> +#define CTRL_EP			4
> +#define ISOC_IN_EP		5
> +#define BULK_IN_EP		6
> +#define INT_IN_EP		7
> +/* bit 6 reserved */
> +/* bit 7 is Host Initiate Disable - for disabling stream selection */
> +#define MAX_BURST(p)		(((p)&0xff) << 8)
> +#define MAX_BURST_MASK		(0xff)
> +#define MAX_BURST_SHIFT		(8)
> +#define CTX_TO_MAX_BURST(p)	(((p) >> 8) & 0xff)
> +#define MAX_PACKET(p)		(((p)&0xffff) << 16)
> +#define MAX_PACKET_MASK		(0xffff)
> +#define MAX_PACKET_DECODED(p)	(((p) >> 16) & 0xffff)
> +#define MAX_PACKET_SHIFT	(16)
> +
> +/* Get max packet size from ep desc. Bit 10..0 specify the max packet size.
> + * USB2.0 spec 9.6.6.
> + */
> +#define GET_MAX_PACKET(p)	((p) & 0x7ff)
> +
> +/* tx_info bitmasks */
> +#define AVG_TRB_LENGTH_FOR_EP(p)	((p) & 0xffff)
> +#define MAX_ESIT_PAYLOAD_FOR_EP(p)	(((p) & 0xffff) << 16)
> +#define CTX_TO_MAX_ESIT_PAYLOAD(p)	(((p) >> 16) & 0xffff)
> +
> +/* deq bitmasks */
> +#define EP_CTX_CYCLE_MASK		(1 << 0)
> +
> +
> +/**
> + * struct xhci_input_control_context
> + * Input control context; see section 6.2.5.
> + *
> + * @drop_context:	set the bit of the endpoint context you want to disable
> + * @add_context:	set the bit of the endpoint context you want to enable
> + */
> +struct xhci_input_control_ctx {
> +	volatile __le32	drop_flags;
> +	volatile __le32	add_flags;
> +	__le32	rsvd2[6];
> +};
> +
> +
> +/**
> + * struct xhci_device_context_array
> + * @dev_context_ptr	array of 64-bit DMA addresses for device contexts
> + */
> +struct xhci_device_context_array {
> +	/* 64-bit device addresses; we only write 32-bit addresses */
> +	__le64			dev_context_ptrs[MAX_HC_SLOTS];
> +};
> +/* TODO: write function to set the 64-bit device DMA address */
> +/*
> + * TODO: change this to be dynamically sized at HC mem init time since the HC
> + * might not be able to handle the maximum number of devices possible.
> + */
> +
> +
> +struct xhci_transfer_event {
> +	/* 64-bit buffer address, or immediate data */
> +	__le64	buffer;
> +	__le32	transfer_len;
> +	/* This field is interpreted differently based on the type of TRB */
> +	volatile __le32	flags;
> +};
> +
> +/* Transfer event TRB length bit mask */
> +/* bits 0:23 */
> +#define EVENT_TRB_LEN(p)	((p) & 0xffffff)
> +
> +/** Transfer Event bit fields **/
> +#define	TRB_TO_EP_ID(p)		(((p) >> 16) & 0x1f)
> +
> +/* Completion Code - only applicable for some types of TRBs */
> +#define	COMP_CODE_MASK		(0xff << 24)
> +#define	COMP_CODE_SHIFT		(24)
> +#define GET_COMP_CODE(p)	(((p) & COMP_CODE_MASK) >> 24)
> +
> +typedef enum {
> +	COMP_SUCCESS = 1,
> +	/* Data Buffer Error */
> +	COMP_DB_ERR, /* 2 */
> +	/* Babble Detected Error */
> +	COMP_BABBLE, /* 3 */
> +	/* USB Transaction Error */
> +	COMP_TX_ERR, /* 4 */
> +	/* TRB Error - some TRB field is invalid */
> +	COMP_TRB_ERR, /* 5 */
> +	/* Stall Error - USB device is stalled */
> +	COMP_STALL, /* 6 */
> +	/* Resource Error - HC doesn't have memory for that device configuration */
> +	COMP_ENOMEM, /* 7 */
> +	/* Bandwidth Error - not enough room in schedule for this dev config */
> +	COMP_BW_ERR, /* 8 */
> +	/* No Slots Available Error - HC ran out of device slots */
> +	COMP_ENOSLOTS, /* 9 */
> +	/* Invalid Stream Type Error */
> +	COMP_STREAM_ERR, /* 10 */
> +	/* Slot Not Enabled Error - doorbell rung for disabled device slot */
> +	COMP_EBADSLT, /* 11 */
> +	/* Endpoint Not Enabled Error */
> +	COMP_EBADEP,/* 12 */
> +	/* Short Packet */
> +	COMP_SHORT_TX, /* 13 */
> +	/* Ring Underrun - doorbell rung for an empty isoc OUT ep ring */
> +	COMP_UNDERRUN, /* 14 */
> +	/* Ring Overrun - isoc IN ep ring is empty when ep is scheduled to RX */
> +	COMP_OVERRUN, /* 15 */
> +	/* Virtual Function Event Ring Full Error */
> +	COMP_VF_FULL, /* 16 */
> +	/* Parameter Error - Context parameter is invalid */
> +	COMP_EINVAL, /* 17 */
> +	/* Bandwidth Overrun Error - isoc ep exceeded its allocated bandwidth */
> +	COMP_BW_OVER,/* 18 */
> +	/* Context State Error - illegal context state transition requested */
> +	COMP_CTX_STATE,/* 19 */
> +	/* No Ping Response Error - HC didn't get PING_RESPONSE in time to TX */
> +	COMP_PING_ERR,/* 20 */
> +	/* Event Ring is full */
> +	COMP_ER_FULL,/* 21 */
> +	/* Incompatible Device Error */
> +	COMP_DEV_ERR,/* 22 */
> +	/* Missed Service Error - HC couldn't service an isoc ep within interval */
> +	COMP_MISSED_INT,/* 23 */
> +	/* Successfully stopped command ring */
> +	COMP_CMD_STOP, /* 24 */
> +	/* Successfully aborted current command and stopped command ring */
> +	COMP_CMD_ABORT, /* 25 */
> +	/* Stopped - transfer was terminated by a stop endpoint command */
> +	COMP_STOP,/* 26 */
> +	/* Same as COMP_EP_STOPPED, but the transferred length in the event
> +	 * is invalid */
> +	COMP_STOP_INVAL, /* 27*/
> +	/* Control Abort Error - Debug Capability - control pipe aborted */
> +	COMP_DBG_ABORT, /* 28 */
> +	/* Max Exit Latency Too Large Error */
> +	COMP_MEL_ERR,/* 29 */
> +	/* TRB type 30 reserved */
> +	/* Isoc Buffer Overrun - an isoc IN ep sent more data than could fit in TD */
> +	COMP_BUFF_OVER = 31,
> +	/* Event Lost Error - xHC has an "internal event overrun condition" */
> +	COMP_ISSUES, /* 32 */
> +	/* Undefined Error - reported when other error codes don't apply */
> +	COMP_UNKNOWN, /* 33 */
> +	/* Invalid Stream ID Error */
> +	COMP_STRID_ERR, /* 34 */
> +	/* Secondary Bandwidth Error - may be returned by a Configure Endpoint cmd */
> +	COMP_2ND_BW_ERR, /* 35 */
> +	/* Split Transaction Error */
> +	COMP_SPLIT_ERR /* 36 */
> +
> +} xhci_comp_code;
> +
> +struct xhci_link_trb {
> +	/* 64-bit segment pointer*/
> +	volatile __le64 segment_ptr;
> +	volatile __le32 intr_target;
> +	volatile __le32 control;
> +};
> +
> +/* control bitfields */
> +#define LINK_TOGGLE (0x1 << 1)
> +
> +/* Command completion event TRB */
> +struct xhci_event_cmd {
> +	/* Pointer to command TRB, or the value passed by the event data trb */
> +	volatile __le64 cmd_trb;
> +	volatile __le32 status;
> +	volatile __le32 flags;
> +};
> +
> +/* flags bitmasks */
> +/* bits 16:23 are the virtual function ID */
> +/* bits 24:31 are the slot ID */
> +#define	TRB_TO_SLOT_ID(p)		(((p) & (0xff << 24)) >> 24)
> +#define	TRB_TO_SLOT_ID_SHIFT		(24)
> +#define	TRB_TO_SLOT_ID_MASK		(0xff << TRB_TO_SLOT_ID_SHIFT)
> +#define	SLOT_ID_FOR_TRB(p)		(((p) & 0xff) << 24)
> +#define	SLOT_ID_FOR_TRB_MASK		(0xff)
> +#define	SLOT_ID_FOR_TRB_SHIFT		(24)
> +
> +/* Stop Endpoint TRB - ep_index to endpoint ID for this TRB */
> +#define TRB_TO_EP_INDEX(p)		((((p) & (0x1f << 16)) >> 16) - 1)
> +#define	EP_ID_FOR_TRB(p)		((((p) + 1) & 0x1f) << 16)
> +
> +#define SUSPEND_PORT_FOR_TRB(p)		(((p) & 1) << 23)
> +#define TRB_TO_SUSPEND_PORT(p)		(((p) & (1 << 23)) >> 23)
> +#define LAST_EP_INDEX			30
> +
> +/* Set TR Dequeue Pointer command TRB fields */
> +#define TRB_TO_STREAM_ID(p)		((((p) & (0xffff << 16)) >> 16))
> +#define STREAM_ID_FOR_TRB(p)		((((p)) & 0xffff) << 16)
> +
> +
> +/* Port Status Change Event TRB fields */
> +/* Port ID - bits 31:24 */
> +#define GET_PORT_ID(p)			(((p) & (0xff << 24)) >> 24)
> +#define	PORT_ID_SHIFT			(24)
> +#define	PORT_ID_MASK			(0xff << PORT_ID_SHIFT)
> +
> +/* Normal TRB fields */
> +/* transfer_len bitmasks - bits 0:16 */
> +#define	TRB_LEN(p)			((p) & 0x1ffff)
> +#define	TRB_LEN_MASK			(0x1ffff)
> +/* Interrupter Target - which MSI-X vector to target the completion event at */
> +#define	TRB_INTR_TARGET_SHIFT		(22)
> +#define	TRB_INTR_TARGET_MASK		(0x3ff)
> +#define TRB_INTR_TARGET(p)		(((p) & 0x3ff) << 22)
> +#define GET_INTR_TARGET(p)		(((p) >> 22) & 0x3ff)
> +#define TRB_TBC(p)			(((p) & 0x3) << 7)
> +#define TRB_TLBPC(p)			(((p) & 0xf) << 16)
> +
> +/* Cycle bit - indicates TRB ownership by HC or HCD */
> +#define TRB_CYCLE		(1<<0)
> +/*
> + * Force next event data TRB to be evaluated before task switch.
> + * Used to pass OS data back after a TD completes.
> + */
> +#define TRB_ENT			(1<<1)
> +/* Interrupt on short packet */
> +#define TRB_ISP			(1<<2)
> +/* Set PCIe no snoop attribute */
> +#define TRB_NO_SNOOP		(1<<3)
> +/* Chain multiple TRBs into a TD */
> +#define TRB_CHAIN		(1<<4)
> +/* Interrupt on completion */
> +#define TRB_IOC			(1<<5)
> +/* The buffer pointer contains immediate data */
> +#define TRB_IDT			(1<<6)
> +
> +/* Block Event Interrupt */
> +#define	TRB_BEI			(1<<9)
> +
> +/* Control transfer TRB specific fields */
> +#define TRB_DIR_IN		(1<<16)
> +#define	TRB_TX_TYPE(p)		((p) << 16)
> +#define	TRB_TX_TYPE_SHIFT	(16)
> +#define	TRB_DATA_OUT		2
> +#define	TRB_DATA_IN		3
> +
> +/* Isochronous TRB specific fields */
> +#define TRB_SIA			(1 << 31)
> +
> +struct xhci_generic_trb {
> +	volatile __le32 field[4];
> +};
> +
> +union xhci_trb {
> +	struct xhci_link_trb		link;
> +	struct xhci_transfer_event	trans_event;
> +	struct xhci_event_cmd		event_cmd;
> +	struct xhci_generic_trb		generic;
> +};
> +
> +/* TRB bit mask */
> +#define	TRB_TYPE_BITMASK	(0xfc00)
> +#define TRB_TYPE(p)		((p) << 10)
> +#define TRB_TYPE_SHIFT		(10)
> +#define TRB_FIELD_TO_TYPE(p)	(((p) & TRB_TYPE_BITMASK) >> 10)
> +
> +/* TRB type IDs */
> +typedef enum {
> +	/* bulk, interrupt, isoc scatter/gather, and control data stage */
> +	TRB_NORMAL = 1,
> +	/* setup stage for control transfers */
> +	TRB_SETUP, /* 2 */
> +	/* data stage for control transfers */
> +	TRB_DATA, /* 3 */
> +	/* status stage for control transfers */
> +	TRB_STATUS, /* 4 */
> +	/* isoc transfers */
> +	TRB_ISOC, /* 5 */
> +	/* TRB for linking ring segments */
> +	TRB_LINK, /* 6 */
> +	/* TRB for EVENT DATA */
> +	TRB_EVENT_DATA, /* 7 */
> +	/* Transfer Ring No-op (not for the command ring) */
> +	TRB_TR_NOOP, /* 8 */
> +	/* Command TRBs */
> +	/* Enable Slot Command */
> +	TRB_ENABLE_SLOT, /* 9 */
> +	/* Disable Slot Command */
> +	TRB_DISABLE_SLOT, /* 10 */
> +	/* Address Device Command */
> +	TRB_ADDR_DEV, /* 11 */
> +	/* Configure Endpoint Command */
> +	TRB_CONFIG_EP, /* 12 */
> +	/* Evaluate Context Command */
> +	TRB_EVAL_CONTEXT, /* 13 */
> +	/* Reset Endpoint Command */
> +	TRB_RESET_EP, /* 14 */
> +	/* Stop Transfer Ring Command */
> +	TRB_STOP_RING, /* 15 */
> +	/* Set Transfer Ring Dequeue Pointer Command */
> +	TRB_SET_DEQ, /* 16 */
> +	/* Reset Device Command */
> +	TRB_RESET_DEV, /* 17 */
> +	/* Force Event Command (opt) */
> +	TRB_FORCE_EVENT, /* 18 */
> +	/* Negotiate Bandwidth Command (opt) */
> +	TRB_NEG_BANDWIDTH, /* 19 */
> +	/* Set Latency Tolerance Value Command (opt) */
> +	TRB_SET_LT, /* 20 */
> +	/* Get port bandwidth Command */
> +	TRB_GET_BW, /* 21 */
> +	/* Force Header Command - generate a transaction or link management packet */
> +	TRB_FORCE_HEADER, /* 22 */
> +	/* No-op Command - not for transfer rings */
> +	TRB_CMD_NOOP, /* 23 */
> +	/* TRB IDs 24-31 reserved */
> +	/* Event TRBS */
> +	/* Transfer Event */
> +	TRB_TRANSFER = 32,
> +	/* Command Completion Event */
> +	TRB_COMPLETION, /* 33 */
> +	/* Port Status Change Event */
> +	TRB_PORT_STATUS, /* 34 */
> +	/* Bandwidth Request Event (opt) */
> +	TRB_BANDWIDTH_EVENT, /* 35 */
> +	/* Doorbell Event (opt) */
> +	TRB_DOORBELL, /* 36 */
> +	/* Host Controller Event */
> +	TRB_HC_EVENT, /* 37 */
> +	/* Device Notification Event - device sent function wake notification */
> +	TRB_DEV_NOTE, /* 38 */
> +	/* MFINDEX Wrap Event - microframe counter wrapped */
> +	TRB_MFINDEX_WRAP, /* 39 */
> +	/* TRB IDs 40-47 reserved, 48-63 is vendor-defined */
> +	/* Nec vendor-specific command completion event. */
> +	TRB_NEC_CMD_COMP = 48, /* 48 */
> +	/* Get NEC firmware revision. */
> +	TRB_NEC_GET_FW, /* 49 */
> +} trb_type;
> +
> +#define TRB_TYPE_LINK(x)	(((x) & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK))
> +/* Above, but for __le32 types -- can avoid work by swapping constants: */
> +#define TRB_TYPE_LINK_LE32(x)	(((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
> +				 cpu_to_le32(TRB_TYPE(TRB_LINK)))
> +#define TRB_TYPE_NOOP_LE32(x)	(((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
> +				 cpu_to_le32(TRB_TYPE(TRB_TR_NOOP)))
> +
> +/*
> + * TRBS_PER_SEGMENT must be a multiple of 4,
> + * since the command ring is 64-byte aligned.
> + * It must also be greater than 16.
> + */
> +#define TRBS_PER_SEGMENT	64
> +/* Allow two commands + a link TRB, along with any reserved command TRBs */
> +#define MAX_RSVD_CMD_TRBS	(TRBS_PER_SEGMENT - 3)
> +#define SEGMENT_SIZE		(TRBS_PER_SEGMENT*16)
> +/* SEGMENT_SHIFT should be log2(SEGMENT_SIZE).
> + * Change this if you change TRBS_PER_SEGMENT!
> + */
> +#define SEGMENT_SHIFT		10
> +/* TRB buffer pointers can't cross 64KB boundaries */
> +#define TRB_MAX_BUFF_SHIFT	16
> +#define TRB_MAX_BUFF_SIZE	(1 << TRB_MAX_BUFF_SHIFT)
> +
> +struct xhci_segment {
> +	union xhci_trb		*trbs;
> +	/* private to HCD */
> +	struct xhci_segment	*next;
> +};
> +
> +struct xhci_ring {
> +	struct xhci_segment	*first_seg;
> +	union  xhci_trb		*enqueue;
> +	struct xhci_segment	*enq_seg;
> +	union  xhci_trb		*dequeue;
> +	struct xhci_segment	*deq_seg;
> +	/*
> +	 * Write the cycle state into the TRB cycle field to give ownership of
> +	 * the TRB to the host controller (if we are the producer), or to check
> +	 * if we own the TRB (if we are the consumer).  See section 4.9.1.
> +	 */
> +	volatile u32		cycle_state;
> +	unsigned int		num_segs;
> +};
> +
> +struct xhci_erst_entry {
> +	/* 64-bit event ring segment address */
> +	__le64	seg_addr;
> +	__le32	seg_size;
> +	/* Set to zero */
> +	__le32	rsvd;
> +};
> +
> +struct xhci_erst {
> +	struct xhci_erst_entry	*entries;
> +	unsigned int		num_entries;
> +	/* Num entries the ERST can contain */
> +	unsigned int		erst_size;
> +};
> +
> +/*
> + * Each segment table entry is 4*32bits long.  1K seems like an ok size:
> + * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
> + * meaning 64 ring segments.
> + * Initial allocated size of the ERST, in number of entries */
> +#define	ERST_NUM_SEGS	3
> +/* Initial number of event segment rings allocated */
> +#define	ERST_ENTRIES	3
> +/* Initial allocated size of the ERST, in number of entries */
> +#define	ERST_SIZE	64
> +/* Poll every 60 seconds */
> +#define	POLL_TIMEOUT	60
> +/* Stop endpoint command timeout (secs) for URB cancellation watchdog timer */
> +#define XHCI_STOP_EP_CMD_TIMEOUT	5
> +/* XXX: Make these module parameters */
> +
> +struct xhci_virt_ep {
> +	struct xhci_ring		*ring;
> +	unsigned int			ep_state;
> +#define SET_DEQ_PENDING		(1 << 0)
> +#define EP_HALTED		(1 << 1)	/* For stall handling */
> +#define EP_HALT_PENDING		(1 << 2)	/* For URB cancellation */
> +/* Transitioning the endpoint to using streams, don't enqueue URBs */
> +#define EP_GETTING_STREAMS	(1 << 3)
> +#define EP_HAS_STREAMS		(1 << 4)
> +/* Transitioning the endpoint to not using streams, don't enqueue URBs */
> +#define EP_GETTING_NO_STREAMS	(1 << 5)
> +};
> +
> +#define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
> +
> +struct xhci_virt_device {
> +	struct usb_device		*udev;
> +	/*
> +	 * Commands to the hardware are passed an "input context" that
> +	 * tells the hardware what to change in its data structures.
> +	 * The hardware will return changes in an "output context" that
> +	 * software must allocate for the hardware.  We need to keep
> +	 * track of input and output contexts separately because
> +	 * these commands might fail and we don't trust the hardware.
> +	 */
> +	struct xhci_container_ctx       *out_ctx;
> +	/* Used for addressing devices and configuration changes */
> +	struct xhci_container_ctx       *in_ctx;
> +	/* Rings saved to ensure old alt settings can be re-instated */
> +#define	XHCI_MAX_RINGS_CACHED	31
> +	struct xhci_virt_ep		eps[31];
> +};
> +
> +/* TODO: copied from ehci.h - can be refactored? */
> +/* xHCI spec says all registers are little endian */
> +static inline unsigned int xhci_readl(uint32_t volatile *regs)
> +{
> +	return readl(regs);
> +}
> +
> +static inline void xhci_writel(uint32_t volatile *regs, const unsigned int val)
> +{
> +	writel(val, regs);
> +}
> +
> +/*
> + * Registers should always be accessed with double word or quad word accesses.
> + * Some xHCI implementations may support 64-bit address pointers.  Registers
> + * with 64-bit address pointers should be written to with dword accesses by
> + * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
> + * xHCI implementations that do not support 64-bit address pointers will ignore
> + * the high dword, and write order is irrelevant.
> + */
> +static inline u64 xhci_readq(__le64 volatile *regs)
> +{
> +	__u32 *ptr = (__u32 *)regs;
> +	u64 val_lo = readl(ptr);
> +	u64 val_hi = readl(ptr + 1);
> +	return val_lo + (val_hi << 32);
> +}
> +
> +static inline void xhci_writeq(__le64 volatile *regs, const u64 val)
> +{
> +	__u32 *ptr = (__u32 *)regs;
> +	u32 val_lo = lower_32_bits(val);
> +	/* FIXME */
> +	u32 val_hi = 0;
> +	writel(val_lo, ptr);
> +	writel(val_hi, ptr + 1);
> +}
> +
> +int xhci_hcd_init(int index, struct xhci_hccr **ret_hccr,
> +					struct xhci_hcor **ret_hcor);
> +void xhci_hcd_stop(int index);
> +
> +
> +/*************************************************************
> +	EXTENDED CAPABILITY DEFINITIONS
> +*************************************************************/
> +/* Up to 16 ms to halt an HC */
> +#define XHCI_MAX_HALT_USEC	(16*1000)
> +/* HC not running - set to 1 when run/stop bit is cleared. */
> +#define XHCI_STS_HALT		(1 << 0)
> +
> +/* HCCPARAMS offset from PCI base address */
> +#define XHCI_HCC_PARAMS_OFFSET	0x10
> +/* HCCPARAMS contains the first extended capability pointer */
> +#define XHCI_HCC_EXT_CAPS(p)	(((p)>>16)&0xffff)
> +
> +/* Command and Status registers offset from the Operational Registers address */
> +#define XHCI_CMD_OFFSET		0x00
> +#define XHCI_STS_OFFSET		0x04
> +
> +#define XHCI_MAX_EXT_CAPS		50
> +
> +/* Capability Register */
> +/* bits 7:0 - how long is the Capabilities register */
> +#define XHCI_HC_LENGTH(p)	(((p) >> 00) & 0x00ff)
> +
> +/* Extended capability register fields */
> +#define XHCI_EXT_CAPS_ID(p)	(((p) >> 0) & 0xff)
> +#define XHCI_EXT_CAPS_NEXT(p)	(((p) >> 8) & 0xff)
> +#define	XHCI_EXT_CAPS_VAL(p)	((p) >> 16)
> +/* Extended capability IDs - ID 0 reserved */
> +#define XHCI_EXT_CAPS_LEGACY	1
> +#define XHCI_EXT_CAPS_PROTOCOL	2
> +#define XHCI_EXT_CAPS_PM	3
> +#define XHCI_EXT_CAPS_VIRT	4
> +#define XHCI_EXT_CAPS_ROUTE	5
> +/* IDs 6-9 reserved */
> +#define XHCI_EXT_CAPS_DEBUG	10
> +/* USB Legacy Support Capability - section 7.1.1 */
> +#define XHCI_HC_BIOS_OWNED	(1 << 16)
> +#define XHCI_HC_OS_OWNED	(1 << 24)
> +
> +/* USB Legacy Support Capability - section 7.1.1 */
> +/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
> +#define XHCI_LEGACY_SUPPORT_OFFSET	(0x00)
> +
> +/* USB Legacy Support Control and Status Register  - section 7.1.2 */
> +/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
> +#define XHCI_LEGACY_CONTROL_OFFSET	(0x04)
> +/* bits 1:2, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
> +#define	XHCI_LEGACY_DISABLE_SMI		((0x3 << 1) + (0xff << 5) + (0x7 << 17))
> +
> +/* USB 2.0 xHCI 0.96 L1C capability - section 7.2.2.1.3.2 */
> +#define XHCI_L1C               (1 << 16)
> +
> +/* USB 2.0 xHCI 1.0 hardware LMP capability - section 7.2.2.1.3.2 */
> +#define XHCI_HLC               (1 << 19)
> +
> +/* command register values to disable interrupts and halt the HC */
> +/* start/stop HC execution - do not write unless HC is halted*/
> +#define XHCI_CMD_RUN		(1 << 0)
> +/* Event Interrupt Enable - get irq when EINT bit is set in USBSTS register */
> +#define XHCI_CMD_EIE		(1 << 2)
> +/* Host System Error Interrupt Enable - get irq when HSEIE bit set in USBSTS */
> +#define XHCI_CMD_HSEIE		(1 << 3)
> +/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
> +#define XHCI_CMD_EWE		(1 << 10)
> +
> +#define XHCI_IRQS		(XHCI_CMD_EIE | XHCI_CMD_HSEIE | XHCI_CMD_EWE)
> +
> +/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
> +#define XHCI_STS_CNR		(1 << 11)
> +
> +struct xhci_ctrl {
> +	struct xhci_hccr *hccr;	/* R/O registers, not need for volatile */
> +	struct xhci_hcor *hcor;
> +	struct xhci_doorbell_array *dba;
> +	struct xhci_run_regs *run_regs;
> +	struct xhci_device_context_array *dcbaa		\
> +			__attribute__ ((aligned(ARCH_DMA_MINALIGN)));
> +	struct xhci_ring *event_ring;
> +	struct xhci_ring *cmd_ring;
> +	struct xhci_ring *transfer_ring;
> +	struct xhci_segment *seg;
> +	struct xhci_intr_reg *ir_set;
> +	struct xhci_erst erst;
> +	struct xhci_erst_entry entry[ERST_NUM_SEGS];
> +	struct xhci_virt_device *devs[MAX_HC_SLOTS];
> +	int rootdev;
> +};
> +
> +unsigned long trb_addr(struct xhci_segment *seg, union xhci_trb *trb);
> +struct xhci_input_control_ctx
> +		*xhci_get_input_control_ctx(struct xhci_container_ctx *ctx);
> +struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_ctrl *ctrl,
> +					struct xhci_container_ctx *ctx);
> +struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_ctrl *ctrl,
> +				    struct xhci_container_ctx *ctx,
> +				    unsigned int ep_index);
> +void xhci_endpoint_copy(struct xhci_ctrl *ctrl,
> +			struct xhci_container_ctx *in_ctx,
> +			struct xhci_container_ctx *out_ctx,
> +			unsigned int ep_index);
> +void xhci_slot_copy(struct xhci_ctrl *ctrl,
> +		    struct xhci_container_ctx *in_ctx,
> +		    struct xhci_container_ctx *out_ctx);
> +void xhci_setup_addressable_virt_dev(struct usb_device *udev);
> +void xhci_queue_command(struct xhci_ctrl *ctrl, u8 *ptr,
> +			u32 slot_id, u32 ep_index, trb_type cmd);
> +void xhci_acknowledge_event(struct xhci_ctrl *ctrl);
> +union xhci_trb *xhci_wait_for_event(struct xhci_ctrl *ctrl, trb_type expected);
> +int xhci_bulk_tx(struct usb_device *udev, unsigned long pipe,
> +		 int length, void *buffer);
> +int xhci_ctrl_tx(struct usb_device *udev, unsigned long pipe,
> +		 struct devrequest *req, int length, void *buffer);
> +int xhci_check_maxpacket(struct usb_device *udev);
> +void xhci_flush_cache(uint32_t addr, u32 type_len);
> +void xhci_inval_cache(uint32_t addr, u32 type_len);
> +void xhci_cleanup(struct xhci_ctrl *ctrl);
> +struct xhci_ring *xhci_ring_alloc(unsigned int num_segs, bool link_trbs);
> +int xhci_alloc_virt_device(struct usb_device *udev);
> +int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr,
> +		  struct xhci_hcor *hcor);
> +
> +#endif /* HOST_XHCI_H_ */
> diff --git a/include/usb.h b/include/usb.h
> index 60db897..a96ec23 100644
> --- a/include/usb.h
> +++ b/include/usb.h
> @@ -125,6 +125,8 @@ struct usb_device {
>  	struct usb_device *children[USB_MAXCHILDREN];
>  
>  	void *controller;		/* hardware controller private data */
> +	/* slot_id - for xHCI enabled devices */
> +	unsigned int slot_id;
>  };
>  
>  /**********************************************************************
> @@ -138,7 +140,7 @@ struct usb_device {
>  	defined(CONFIG_USB_OMAP3) || defined(CONFIG_USB_DA8XX) || \
>  	defined(CONFIG_USB_BLACKFIN) || defined(CONFIG_USB_AM35X) || \
>  	defined(CONFIG_USB_MUSB_DSPS) || defined(CONFIG_USB_MUSB_AM35X) || \
> -	defined(CONFIG_USB_MUSB_OMAP2PLUS)
> +	defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined(CONFIG_USB_XHCI)
>  
>  int usb_lowlevel_init(int index, void **controller);
>  int usb_lowlevel_stop(int index);
> @@ -338,6 +340,10 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
>  #define usb_pipecontrol(pipe)	(usb_pipetype((pipe)) == PIPE_CONTROL)
>  #define usb_pipebulk(pipe)	(usb_pipetype((pipe)) == PIPE_BULK)
>  
> +#define usb_pipe_ep_index(pipe)	\
> +		usb_pipecontrol(pipe) ? (usb_pipeendpoint(pipe) * 2) : \
> +				((usb_pipeendpoint(pipe) * 2) - \
> +				 (usb_pipein(pipe) ? 0 : 1))
>  
>  /*************************************************************************
>   * Hub Stuff
> @@ -382,5 +388,6 @@ struct usb_device *usb_alloc_new_device(void *controller);
>  
>  int usb_new_device(struct usb_device *dev);
>  void usb_free_device(void);
> +int usb_alloc_device(struct usb_device *dev);
>  
>  #endif /*_USB_H_ */
Various Checkpatch errors, warnings and checks

total: 1 errors, 56 warnings, 48 checks, 4103 lines checked

Dear Dan Murphy,

> On 08/21/2013 05:12 AM, Vivek Gautam wrote:
> > This adds stack layer for eXtensible Host Controller Interface
> > which facilitates use of USB 3.0 in host mode.
> > 
> > Adapting xHCI host controller driver in linux-kernel
> > by Sarah Sharp to needs in u-boot.
> > 
> > This adds the basic xHCI host controller driver with bare minimum
> > features:
> > - Control/Bulk transfer support has been added with required
> > 
> >   infrastructure for necessary xHC data structures.
> > 
> > - Stream protocol hasn't been supported yet.
> > - No support for quirky devices has been added.
> > 
> > Signed-off-by: Vikas C Sajjan <vikas.sajjan@samsung.com>
> > Signed-off-by: Julius Werner <jwerner@chromium.org>
> > Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
> > Cc: Simon Glass <sjg@chromium.org>
> > Cc: Minkyu Kang <mk7.kang@samsung.com>
> > Cc: Dan Murphy <dmurphy@ti.com>
> > Cc: Marek Vasut <marex@denx.de>

[...]

Besides what Dan said, please see [1] , point 4. I miss the exact point in Linux 
kernel history (read commit hash) from which this code was imported at least.

[1] http://www.denx.de/wiki/view/U-Boot/Patches#Attributing_Code_Copyrights_Sign

Best regards,
Marek Vasut

Hi Dan,


On Tue, Sep 3, 2013 at 7:28 PM, Dan Murphy <dmurphy@ti.com> wrote:
> On 08/21/2013 05:12 AM, Vivek Gautam wrote:
>> This adds stack layer for eXtensible Host Controller Interface
>> which facilitates use of USB 3.0 in host mode.
>>
>> Adapting xHCI host controller driver in linux-kernel
>> by Sarah Sharp to needs in u-boot.
>>
>> This adds the basic xHCI host controller driver with bare minimum
>> features:
>> - Control/Bulk transfer support has been added with required
>>   infrastructure for necessary xHC data structures.
>> - Stream protocol hasn't been supported yet.
>> - No support for quirky devices has been added.
>>
>> Signed-off-by: Vikas C Sajjan <vikas.sajjan@samsung.com>
>> Signed-off-by: Julius Werner <jwerner@chromium.org>
>> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
>> Cc: Simon Glass <sjg@chromium.org>
>> Cc: Minkyu Kang <mk7.kang@samsung.com>
>> Cc: Dan Murphy <dmurphy@ti.com>
>> Cc: Marek Vasut <marex@denx.de>
>> ---
>>  common/usb.c                 |   27 +-
>>  drivers/usb/host/Makefile    |    3 +
>>  drivers/usb/host/xhci-mem.c  |  731 ++++++++++++++++++++++++
>>  drivers/usb/host/xhci-ring.c |  950 +++++++++++++++++++++++++++++++
>>  drivers/usb/host/xhci.c      | 1040 ++++++++++++++++++++++++++++++++++
>>  drivers/usb/host/xhci.h      | 1280 ++++++++++++++++++++++++++++++++++++++++++
>>  include/usb.h                |    9 +-
>>  7 files changed, 4037 insertions(+), 3 deletions(-)
>>  create mode 100644 drivers/usb/host/xhci-mem.c
>>  create mode 100644 drivers/usb/host/xhci-ring.c
>>  create mode 100644 drivers/usb/host/xhci.c
>>  create mode 100644 drivers/usb/host/xhci.h
>>
>> diff --git a/common/usb.c b/common/usb.c
>> index c97f522..e7800fa 100644
>> --- a/common/usb.c
>> +++ b/common/usb.c
>> @@ -855,6 +855,16 @@ void usb_free_device(void)
>>  }
>>
>>  /*
>> + * XHCI issues Enable Slot command and thereafter
>> + * allocates device contexts. Provide a weak alias
>> + * function for the purpose, so that XHCI overrides it
>> + * and EHCI/OHCI just work out of the box.
>> + */
>> +__weak int usb_alloc_device(struct usb_device *udev)
>> +{
>> +     return 0;
>> +}
>> +/*
>>   * By the time we get here, the device has gotten a new device ID
>>   * and is in the default state. We need to identify the thing and
>>   * get the ball rolling..
>> @@ -867,6 +877,17 @@ int usb_new_device(struct usb_device *dev)
>>       int tmp;
>>       ALLOC_CACHE_ALIGN_BUFFER(unsigned char, tmpbuf, USB_BUFSIZ);
>>
>> +     /*
>> +      * Allocate usb 3.0 device context.
>> +      * USB 3.0 (xHCI) protocol tries to allocate device slot
>> +      * and related data structures first. This call does that.
>> +      * Refer to sec 4.3.2 in xHCI spec rev1.0
>> +      */
>> +     if (usb_alloc_device(dev)) {
>> +             printf("Cannot allocate device context to get SLOT_ID\n");
>> +             return -1;
>> +     }
>> +
>>       /* We still haven't set the Address yet */
>>       addr = dev->devnum;
>>       dev->devnum = 0;
>> @@ -897,7 +918,7 @@ int usb_new_device(struct usb_device *dev)
>>        * http://sourceforge.net/mailarchive/forum.php?
>>        * thread_id=5729457&forum_id=5398
>>        */
>> -     struct usb_device_descriptor *desc;
>> +     __maybe_unused struct usb_device_descriptor *desc;
>>       int port = -1;
>>       struct usb_device *parent = dev->parent;
>>       unsigned short portstatus;
>> @@ -914,6 +935,7 @@ int usb_new_device(struct usb_device *dev)
>>       dev->epmaxpacketin[0] = 64;
>>       dev->epmaxpacketout[0] = 64;
>>
>> +#ifndef CONFIG_USB_XHCI
>
> Add a comment why we cannot get the descriptor on xHCI.

Ok, will add a comment here.

>
>>       err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, desc, 64);
>>       if (err < 0) {
>>               debug("usb_new_device: usb_get_descriptor() failed\n");
>> @@ -926,11 +948,12 @@ int usb_new_device(struct usb_device *dev)
>>        * to differentiate between HUB and DEVICE.
>>        */
>>       dev->descriptor.bDeviceClass = desc->bDeviceClass;
>> +#endif
>>
>> -     /* find the port number we're at */
>>       if (parent) {
>>               int j;
>>
>> +             /* find the port number we're at */
>>               for (j = 0; j < parent->maxchild; j++) {
>>                       if (parent->children[j] == dev) {
>>                               port = j;
>> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
>> index ff6c80e..6bd6c86 100644
>> --- a/drivers/usb/host/Makefile
>> +++ b/drivers/usb/host/Makefile
>> @@ -42,6 +42,9 @@ COBJS-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o
>>  COBJS-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
>>  COBJS-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
>>
>> +# xhci
>> +COBJS-$(CONFIG_USB_XHCI) += xhci.o xhci-mem.o xhci-ring.o
>> +
>>  COBJS        := $(COBJS-y)
>>  SRCS := $(COBJS:.o=.c)
>>  OBJS := $(addprefix $(obj),$(COBJS))
>> diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
>> new file mode 100644
>> index 0000000..709ef7e
>> --- /dev/null
>> +++ b/drivers/usb/host/xhci-mem.c
>> @@ -0,0 +1,731 @@
>> +/*
>> + * USB HOST XHCI Controller stack
>> + *
>> + * Copyright (C) 2013 Samsung Electronics Co.Ltd
>> + *   Vivek Gautam <gautam.vivek@samsung.com>
>> + *   Vikas Sajjan <vikas.sajjan@samsung.com>
>> + *
>> + * Based on xHCI host controller driver in linux-kernel
>> + * by Sarah Sharp.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
>> + * MA 02110-1301 USA
>> + */
>> +
>
> Needs new SPDX license.
>
> * SPDX-License-Identifier:      GPL-2.0+
>
Ok, will put SPDX license.

>
>> +#include <common.h>
>> +#include <asm/byteorder.h>
>> +#include <usb.h>
>> +#include <asm/io.h>
>
> Move this to the xhci.h as it is needed there for the write/read interfaces

Sure, so that we will not require the patch posted by you.

>
>> +#include <malloc.h>
>> +#include <asm/cache.h>
>> +#include <asm-generic/errno.h>
>> +
>> +#include "xhci.h"
>> +
>> +#define CACHELINE_SIZE               CONFIG_SYS_CACHELINE_SIZE
>> +/**
>> + * flushes the address passed till the length
>> + *
>> + * @param addr       pointer to memory region to be flushed
>> + * @param len        the length of the cache line to be flushed
>> + * @return none
>> + */
>> +void xhci_flush_cache(uint32_t addr, u32 len)
>> +{
>> +     BUG_ON((void *)addr == NULL || len == 0);
>> +
>> +     flush_dcache_range(addr & ~(CACHELINE_SIZE - 1),
>> +                             ALIGN(addr + len, CACHELINE_SIZE));
>> +}
>> +
>> +/**
>> + * invalidates the address passed till the length
>> + *
>> + * @param addr       pointer to memory region to be invalidates
>> + * @param len        the length of the cache line to be invalidated
>> + * @return none
>> + */
>> +void xhci_inval_cache(uint32_t addr, u32 len)
>> +{
>> +     BUG_ON((void *)addr == NULL || len == 0);
>> +
>> +     invalidate_dcache_range(addr & ~(CACHELINE_SIZE - 1),
>> +                             ALIGN(addr + len, CACHELINE_SIZE));
>> +}
>> +
>> +
>> +/**
>> + * frees the "segment" pointer passed
>> + *
>> + * @param ptr        pointer to "segement" to be freed
>> + * @return none
>> + */
>> +static void xhci_segment_free(struct xhci_segment *seg)
>> +{
>> +     free(seg->trbs);
>> +     seg->trbs = NULL;
>> +
>> +     free(seg);
>
> Do you want to make seg = NULL as well?

Why not ? No one will reference this "seg" after this, right ?

>
>> +}
>> +
>> +/**
>> + * frees the "ring" pointer passed
>> + *
>> + * @param ptr        pointer to "ring" to be freed
>> + * @return none
>> + */
>> +static void xhci_ring_free(struct xhci_ring *ring)
>> +{
>> +     struct xhci_segment *seg;
>> +     struct xhci_segment *first_seg;
>> +
>> +     BUG_ON(!ring);
>> +
>> +     first_seg = ring->first_seg;
>> +     seg = first_seg->next;
>> +     while (seg != first_seg) {
>> +             struct xhci_segment *next = seg->next;
>> +             xhci_segment_free(seg);
>> +             seg = next;
>> +     }
>> +     xhci_segment_free(first_seg);
>> +
>> +     free(ring);
>
> Do you want to make ring = NULL?

Ditto, this ring pointer also not required further by anyone, isn't it ?

>
>> +}
>> +
>> +/**
>> + * frees the "xhci_container_ctx" pointer passed
>> + *
>> + * @param ptr        pointer to "xhci_container_ctx" to be freed
>> + * @return none
>> + */
>> +static void xhci_free_container_ctx(struct xhci_container_ctx *ctx)
>> +{
>> +     free(ctx->bytes);
>> +     free(ctx);
>> +}
>> +
>> +/**
>> + * frees the virtual devices for "xhci_ctrl" pointer passed
>> + *
>> + * @param ptr        pointer to "xhci_ctrl" whose virtual devices are to be freed
>> + * @return none
>> + */
>> +static void xhci_free_virt_devices(struct xhci_ctrl *ctrl)
>> +{
>> +     int i;
>> +     int slot_id;
>> +     struct xhci_virt_device *virt_dev;
>> +
>> +     /*
>> +      * refactored here to loop through all virt_dev
>> +      * Slot ID 0 is reserved
>> +      */
>> +     for (slot_id = 0; slot_id < MAX_HC_SLOTS; slot_id++) {
>> +             virt_dev = ctrl->devs[slot_id];
>> +             if (!virt_dev)
>> +                     continue;
>> +
>> +             ctrl->dcbaa->dev_context_ptrs[slot_id] = 0;
>> +
>> +             for (i = 0; i < 31; ++i)
>> +                     if (virt_dev->eps[i].ring)
>> +                             xhci_ring_free(virt_dev->eps[i].ring);
>> +
>> +             if (virt_dev->in_ctx)
>> +                     xhci_free_container_ctx(virt_dev->in_ctx);
>> +             if (virt_dev->out_ctx)
>> +                     xhci_free_container_ctx(virt_dev->out_ctx);
>> +
>> +             free(virt_dev);
>> +             /* make sure we are pointing to NULL */
>> +             ctrl->devs[slot_id] = NULL;
>> +     }
>> +}
>> +
>> +/**
>> + * frees all the memory allocated
>> + *
>> + * @param ptr        pointer to "xhci_ctrl" to be cleaned up
>> + * @return none
>> + */
>> +void xhci_cleanup(struct xhci_ctrl *ctrl)
>> +{
>> +     xhci_ring_free(ctrl->event_ring);
>> +     xhci_ring_free(ctrl->cmd_ring);
>> +     xhci_free_virt_devices(ctrl);
>> +     free(ctrl->erst.entries);
>> +     free(ctrl->dcbaa);
>> +     memset(ctrl, '\0', sizeof(struct xhci_ctrl));
>> +}
>> +
>> +/**
>> + * Malloc the aligned memory
>> + *
>> + * @param size       size of memory to be allocated
>> + * @return allocates the memory and returns the aligned pointer
>> + */
>> +static void *xhci_malloc(unsigned int size)
>> +{
>> +     void *ptr;
>> +     size_t cacheline_size = max(XHCI_ALIGNMENT, CACHELINE_SIZE);
>> +
>> +     ptr = memalign(cacheline_size, ALIGN(size, cacheline_size));
>> +     BUG_ON(!ptr);
>> +     memset(ptr, '\0', size);
>> +
>> +     xhci_flush_cache((uint32_t)ptr, size);
>> +
>> +     return ptr;
>> +}
>> +
>> +/**
>> + * Make the prev segment point to the next segment.
>> + * Change the last TRB in the prev segment to be a Link TRB which points to the
>> + * address of the next segment.  The caller needs to set any Link TRB
>> + * related flags, such as End TRB, Toggle Cycle, and no snoop.
>> + *
>> + * @param prev       pointer to the previous segment
>> + * @param next       pointer to the next segment
>> + * @param link_trbs  flag to indicate whether to link the trbs or NOT
>> + * @return none
>> + */
>> +static void xhci_link_segments(struct xhci_segment *prev,
>> +                             struct xhci_segment *next, bool link_trbs)
>> +{
>> +     u32 val;
>> +     u64 val_64 = 0;
>> +
>> +     if (!prev || !next)
>> +             return;
>> +     prev->next = next;
>> +     if (link_trbs) {
>> +             val_64 = (uintptr_t)next->trbs;
>> +             prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr = val_64;
>> +
>> +             /*
>> +              * Set the last TRB in the segment to
>> +              * have a TRB type ID of Link TRB
>> +              */
>> +             val = le32_to_cpu(prev->trbs[TRBS_PER_SEGMENT-1].link.control);
>> +             val &= ~TRB_TYPE_BITMASK;
>> +             val |= (TRB_LINK << TRB_TYPE_SHIFT);
>> +
>> +             prev->trbs[TRBS_PER_SEGMENT-1].link.control = cpu_to_le32(val);
>> +     }
>> +}
>> +
>> +/**
>> + * Initialises the Ring's enqueue,dequeue,enq_seg pointers
>> + *
>> + * @param ring       pointer to the RING to be intialised
>> + * @return none
>> + */
>> +static void xhci_initialize_ring_info(struct xhci_ring *ring)
>> +{
>> +     /*
>> +      * The ring is empty, so the enqueue pointer == dequeue pointer
>> +      */
>> +     ring->enqueue = ring->first_seg->trbs;
>> +     ring->enq_seg = ring->first_seg;
>> +     ring->dequeue = ring->enqueue;
>> +     ring->deq_seg = ring->first_seg;
>> +
>> +     /*
>> +      * The ring is initialized to 0. The producer must write 1 to the
>> +      * cycle bit to handover ownership of the TRB, so PCS = 1.
>> +      * The consumer must compare CCS to the cycle bit to
>> +      * check ownership, so CCS = 1.
>> +      */
>> +     ring->cycle_state = 1;
>> +}
>> +
>> +/**
>> + * Allocates a generic ring segment from the ring pool, sets the dma address,
>> + * initializes the segment to zero, and sets the private next pointer to NULL.
>> + * Section 4.11.1.1:
>> + * "All components of all Command and Transfer TRBs shall be initialized to '0'"
>> + *
>> + * @param    none
>> + * @return pointer to the newly allocated SEGMENT
>> + */
>> +static struct xhci_segment *xhci_segment_alloc(void)
>> +{
>> +     struct xhci_segment *seg;
>> +
>> +     seg = (struct xhci_segment *)malloc(sizeof(struct xhci_segment));
>> +     BUG_ON(!seg);
>> +
>> +     seg->trbs = (union xhci_trb *)xhci_malloc(SEGMENT_SIZE);
>> +
>> +     seg->next = NULL;
>> +
>> +     return seg;
>> +}
>> +
>> +/**
>> + * Create a new ring with zero or more segments.
>> + * TODO: current code only uses one-time-allocated single-segment rings
>> + * of 1KB anyway, so we might as well get rid of all the segment and
>> + * linking code (and maybe increase the size a bit, e.g. 4KB).
>> + *
>> + *
>> + * Link each segment together into a ring.
>> + * Set the end flag and the cycle toggle bit on the last segment.
>> + * See section 4.9.2 and figures 15 and 16 of XHCI spec rev1.0.
>> + *
>> + * @param num_segs   number of segments in the ring
>> + * @param link_trbs  flag to indicate whether to link the trbs or NOT
>> + * @return pointer to the newly created RING
>> + */
>> +struct xhci_ring *xhci_ring_alloc(unsigned int num_segs, bool link_trbs)
>> +{
>> +     struct xhci_ring *ring;
>> +     struct xhci_segment *prev;
>> +
>> +     ring = (struct xhci_ring *)malloc(sizeof(struct xhci_ring));
>> +     BUG_ON(!ring);
>> +
>> +     if (num_segs == 0)
>> +             return ring;
>> +
>> +     ring->first_seg = xhci_segment_alloc();
>> +     BUG_ON(!ring->first_seg);
>> +
>> +     num_segs--;
>> +
>> +     prev = ring->first_seg;
>> +     while (num_segs > 0) {
>> +             struct xhci_segment *next;
>> +
>> +             next = xhci_segment_alloc();
>> +             BUG_ON(!next);
>> +
>> +             xhci_link_segments(prev, next, link_trbs);
>> +
>> +             prev = next;
>> +             num_segs--;
>> +     }
>> +     xhci_link_segments(prev, ring->first_seg, link_trbs);
>> +     if (link_trbs) {
>> +             /* See section 4.9.2.1 and 6.4.4.1 */
>> +             prev->trbs[TRBS_PER_SEGMENT-1].link.control |=
>> +                                     cpu_to_le32(LINK_TOGGLE);
>> +     }
>> +     xhci_initialize_ring_info(ring);
>> +
>> +     return ring;
>> +}
>> +
>> +/**
>> + * Allocates the Container context
>> + *
>> + * @param ctrl       Host controller data structure
>> + * @param type type of XHCI Container Context
>> + * @return NULL if failed else pointer to the context on success
>> + */
>> +static struct xhci_container_ctx
>> +             *xhci_alloc_container_ctx(struct xhci_ctrl *ctrl, int type)
>> +{
>> +     struct xhci_container_ctx *ctx;
>> +
>> +     ctx = (struct xhci_container_ctx *)
>> +             malloc(sizeof(struct xhci_container_ctx));
>> +     BUG_ON(!ctx);
>> +
>> +     BUG_ON((type != XHCI_CTX_TYPE_DEVICE) && (type != XHCI_CTX_TYPE_INPUT));
>> +     ctx->type = type;
>> +     ctx->size = (MAX_EP_CTX_NUM + 1) *
>> +                     CTX_SIZE(readl(&ctrl->hccr->cr_hccparams));
>> +     if (type == XHCI_CTX_TYPE_INPUT)
>> +             ctx->size += CTX_SIZE(readl(&ctrl->hccr->cr_hccparams));
>> +
>> +     ctx->bytes = (u8 *)xhci_malloc(ctx->size);
>> +
>> +     return ctx;
>> +}
>> +
>> +/**
>> + * Allocating virtual device
>> + *
>> + * @param udev       pointer to USB deivce structure
>> + * @return 0 on success else -1 on failure
>> + */
>> +int xhci_alloc_virt_device(struct usb_device *udev)
>> +{
>> +     u64 byte_64 = 0;
>> +     unsigned int slot_id = udev->slot_id;
>> +     struct xhci_virt_device *virt_dev;
>> +     struct xhci_ctrl *ctrl = udev->controller;
>> +
>> +     /* Slot ID 0 is reserved */
>> +     if (ctrl->devs[slot_id]) {
>> +             printf("Virt dev for slot[%d] already allocated\n", slot_id);
>> +             return -1;
>
> Global comment if you are including errno can't we make the errors returned mean something other then -1?
> Or I fail to see why errno was included.

Sure, will fix this globally.

>
>> +     }
>> +
>> +     ctrl->devs[slot_id] = (struct xhci_virt_device *)
>> +                                     malloc(sizeof(struct xhci_virt_device));
>> +
>> +     if (!ctrl->devs[slot_id]) {
>> +             printf("Failed to allocate virtual device\n");
>
> Should use puts when no arguments.

Ok.

>
>> +             return -1;
>> +     }
>> +
>> +     memset(ctrl->devs[slot_id], 0, sizeof(struct xhci_virt_device));
>> +     virt_dev = ctrl->devs[slot_id];
>> +
>> +     /* Allocate the (output) device context that will be used in the HC. */
>> +     virt_dev->out_ctx = xhci_alloc_container_ctx(ctrl,
>> +                                     XHCI_CTX_TYPE_DEVICE);
>> +     if (!virt_dev->out_ctx) {
>> +             printf("Failed to allocate out context for virt dev\n");
>
> Should use puts when no arguments.

ditto

>
>> +             return -1;
>> +     }
>> +
>> +     /* Allocate the (input) device context for address device command */
>> +     virt_dev->in_ctx = xhci_alloc_container_ctx(ctrl,
>> +                                     XHCI_CTX_TYPE_INPUT);
>> +     if (!virt_dev->in_ctx) {
>> +             printf("Failed to allocate in context for virt dev\n");
>
> Should use puts when no arguments.

ditto

>
>> +             return -1;
>> +     }
>> +
>> +     /* Allocate endpoint 0 ring */
>> +     virt_dev->eps[0].ring = xhci_ring_alloc(1, true);
>> +
>> +     byte_64 = (uintptr_t)(virt_dev->out_ctx->bytes);
>> +
>> +     /* Point to output device context in dcbaa. */
>> +     ctrl->dcbaa->dev_context_ptrs[slot_id] = byte_64;
>> +
>> +     xhci_flush_cache((uint32_t)&ctrl->dcbaa->dev_context_ptrs[slot_id],
>> +                                                     sizeof(__le64));
>> +     return 0;
>> +}
>> +
>> +/**
>> + * Allocates the necessary data structures
>> + * for XHCI host controller
>> + *
>> + * @param ctrl       Host controller data structure
>> + * @param hccr       pointer to HOST Controller Control Registers
>> + * @param hcor       pointer to HOST Controller Operational Registers
>> + * @return 0 if successful else -1 on failure
>> + */
>> +int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr,
>> +                                     struct xhci_hcor *hcor)
>> +{
>> +     uint64_t val_64;
>> +     uint64_t trb_64;
>> +     uint32_t val;
>> +     unsigned long deq;
>> +     int i;
>> +     struct xhci_segment *seg;
>> +
>> +     /* DCBAA initialization */
>> +     ctrl->dcbaa = (struct xhci_device_context_array *)
>> +                     xhci_malloc(sizeof(struct xhci_device_context_array));
>> +     if (ctrl->dcbaa == NULL) {
>> +             printf("unable to allocate DCBA\n");
>> +             return -1;
>> +     }
>> +
>> +     val_64 = (uintptr_t)ctrl->dcbaa;
>> +     /* Set the pointer in DCBAA register */
>> +     xhci_writeq(&hcor->or_dcbaap, val_64);
>> +
>> +     /* Command ring control pointer register initialization */
>> +     ctrl->cmd_ring = xhci_ring_alloc(1, true);
>> +
>> +     /* Set the address in the Command Ring Control register */
>> +     trb_64 = (uintptr_t)ctrl->cmd_ring->first_seg->trbs;
>> +     val_64 = xhci_readq(&hcor->or_crcr);
>> +     val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
>> +             (trb_64 & (u64) ~CMD_RING_RSVD_BITS) |
>> +             ctrl->cmd_ring->cycle_state;
>> +     xhci_writeq(&hcor->or_crcr, val_64);
>> +
>> +     /* write the address of db register */
>> +     val = xhci_readl(&hccr->cr_dboff);
>> +     val &= DBOFF_MASK;
>> +     ctrl->dba = (struct xhci_doorbell_array *)((char *)hccr + val);
>> +
>> +     /* write the address of runtime register */
>> +     val = xhci_readl(&hccr->cr_rtsoff);
>> +     val &= RTSOFF_MASK;
>> +     ctrl->run_regs = (struct xhci_run_regs *)((char *)hccr + val);
>> +
>> +     /* writting the address of ir_set structure */
>> +     ctrl->ir_set = &ctrl->run_regs->ir_set[0];
>> +
>> +     /* Event ring does not maintain link TRB */
>> +     ctrl->event_ring = xhci_ring_alloc(ERST_NUM_SEGS, false);
>> +     ctrl->erst.entries = (struct xhci_erst_entry *)
>> +             xhci_malloc(sizeof(struct xhci_erst_entry) * ERST_NUM_SEGS);
>> +
>> +     ctrl->erst.num_entries = ERST_NUM_SEGS;
>> +
>> +     for (val = 0, seg = ctrl->event_ring->first_seg;
>> +                     val < ERST_NUM_SEGS;
>> +                     val++) {
>> +             trb_64 = 0;
>> +             trb_64 = (uintptr_t)seg->trbs;
>> +             struct xhci_erst_entry *entry = &ctrl->erst.entries[val];
>> +             xhci_writeq(&entry->seg_addr, trb_64);
>> +             entry->seg_size = cpu_to_le32(TRBS_PER_SEGMENT);
>> +             entry->rsvd = 0;
>> +             seg = seg->next;
>> +     }
>> +     xhci_flush_cache((uint32_t)ctrl->erst.entries,
>> +                     ERST_NUM_SEGS * sizeof(struct xhci_erst_entry));
>> +
>> +     deq = (unsigned long)ctrl->event_ring->dequeue;
>> +
>> +     /* Update HC event ring dequeue pointer */
>> +     xhci_writeq(&ctrl->ir_set->erst_dequeue,
>> +                             (u64)deq & (u64)~ERST_PTR_MASK);
>> +
>> +     /* set ERST count with the number of entries in the segment table */
>> +     val = xhci_readl(&ctrl->ir_set->erst_size);
>> +     val &= ERST_SIZE_MASK;
>> +     val |= ERST_NUM_SEGS;
>> +     xhci_writel(&ctrl->ir_set->erst_size, val);
>> +
>> +     /* this is the event ring segment table pointer */
>> +     val_64 = xhci_readq(&ctrl->ir_set->erst_base);
>> +     val_64 &= ERST_PTR_MASK;
>> +     val_64 |= ((u32)(ctrl->erst.entries) & ~ERST_PTR_MASK);
>> +
>> +     xhci_writeq(&ctrl->ir_set->erst_base, val_64);
>> +
>> +     /* initializing the virtual devices to NULL */
>> +     for (i = 0; i < MAX_HC_SLOTS; ++i)
>> +             ctrl->devs[i] = NULL;
>> +
>> +     /*
>> +      * Just Zero'ing this register completely,
>> +      * or some spurious Device Notification Events
>> +      * might screw things here.
>> +      */
>> +     xhci_writel(&hcor->or_dnctrl, 0x0);
>> +
>> +     return 0;
>> +}
>> +
>> +/**
>> + * Give the input control context for the passed container context
>> + *
>> + * @param ctx        pointer to the context
>> + * @return pointer to the Input control context data
>> + */
>> +struct xhci_input_control_ctx
>> +             *xhci_get_input_control_ctx(struct xhci_container_ctx *ctx)
>> +{
>> +     BUG_ON(ctx->type != XHCI_CTX_TYPE_INPUT);
>> +     return (struct xhci_input_control_ctx *)ctx->bytes;
>> +}
>> +
>> +/**
>> + * Give the slot context for the passed container context
>> + *
>> + * @param ctrl       Host controller data structure
>> + * @param ctx        pointer to the context
>> + * @return pointer to the slot control context data
>> + */
>> +struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_ctrl *ctrl,
>> +                             struct xhci_container_ctx *ctx)
>> +{
>> +     if (ctx->type == XHCI_CTX_TYPE_DEVICE)
>> +             return (struct xhci_slot_ctx *)ctx->bytes;
>> +
>> +     return (struct xhci_slot_ctx *)
>> +             (ctx->bytes + CTX_SIZE(readl(&ctrl->hccr->cr_hccparams)));
>> +}
>> +
>> +/**
>> + * Gets the EP context from based on the ep_index
>> + *
>> + * @param ctrl       Host controller data structure
>> + * @param ctx        context container
>> + * @param ep_index   index of the endpoint
>> + * @return pointer to the End point context
>> + */
>> +struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_ctrl *ctrl,
>> +                                 struct xhci_container_ctx *ctx,
>> +                                 unsigned int ep_index)
>> +{
>> +     /* increment ep index by offset of start of ep ctx array */
>> +     ep_index++;
>> +     if (ctx->type == XHCI_CTX_TYPE_INPUT)
>> +             ep_index++;
>> +
>> +     return (struct xhci_ep_ctx *)
>> +             (ctx->bytes +
>> +             (ep_index * CTX_SIZE(readl(&ctrl->hccr->cr_hccparams))));
>> +}
>> +
>> +/**
>> + * Copy output xhci_ep_ctx to the input xhci_ep_ctx copy.
>> + * Useful when you want to change one particular aspect of the endpoint
>> + * and then issue a configure endpoint command.
>> + *
>> + * @param ctrl       Host controller data structure
>> + * @param in_ctx contains the input context
>> + * @param out_ctx contains the input context
>> + * @param ep_index index of the end point
>> + * @return none
>> + */
>> +void xhci_endpoint_copy(struct xhci_ctrl *ctrl,
>> +                     struct xhci_container_ctx *in_ctx,
>> +                     struct xhci_container_ctx *out_ctx,
>> +                     unsigned int ep_index)
>> +{
>> +     struct xhci_ep_ctx *out_ep_ctx;
>> +     struct xhci_ep_ctx *in_ep_ctx;
>> +
>> +     out_ep_ctx = xhci_get_ep_ctx(ctrl, out_ctx, ep_index);
>> +     in_ep_ctx = xhci_get_ep_ctx(ctrl, in_ctx, ep_index);
>> +
>> +     in_ep_ctx->ep_info = out_ep_ctx->ep_info;
>> +     in_ep_ctx->ep_info2 = out_ep_ctx->ep_info2;
>> +     in_ep_ctx->deq = out_ep_ctx->deq;
>> +     in_ep_ctx->tx_info = out_ep_ctx->tx_info;
>> +}
>> +
>> +/**
>> + * Copy output xhci_slot_ctx to the input xhci_slot_ctx.
>> + * Useful when you want to change one particular aspect of the endpoint
>> + * and then issue a configure endpoint command.
>> + * Only the context entries field matters, but
>> + * we'll copy the whole thing anyway.
>> + *
>> + * @param ctrl       Host controller data structure
>> + * @param in_ctx contains the inpout context
>> + * @param out_ctx contains the inpout context
>> + * @return none
>> + */
>> +void xhci_slot_copy(struct xhci_ctrl *ctrl, struct xhci_container_ctx *in_ctx,
>> +                                     struct xhci_container_ctx *out_ctx)
>> +{
>> +     struct xhci_slot_ctx *in_slot_ctx;
>> +     struct xhci_slot_ctx *out_slot_ctx;
>> +
>> +     in_slot_ctx = xhci_get_slot_ctx(ctrl, in_ctx);
>> +     out_slot_ctx = xhci_get_slot_ctx(ctrl, out_ctx);
>> +
>> +     in_slot_ctx->dev_info = out_slot_ctx->dev_info;
>> +     in_slot_ctx->dev_info2 = out_slot_ctx->dev_info2;
>> +     in_slot_ctx->tt_info = out_slot_ctx->tt_info;
>> +     in_slot_ctx->dev_state = out_slot_ctx->dev_state;
>> +}
>> +
>> +/**
>> + * Setup an xHCI virtual device for a Set Address command
>> + *
>> + * @param udev pointer to the Device Data Structure
>> + * @return returns negative value on failure else 0 on success
>> + */
>> +void xhci_setup_addressable_virt_dev(struct usb_device *udev)
>> +{
>> +     struct usb_device *hop = udev;
>> +     struct xhci_virt_device *virt_dev;
>> +     struct xhci_ep_ctx *ep0_ctx;
>> +     struct xhci_slot_ctx *slot_ctx;
>> +     u32 port_num = 0;
>> +     u64 trb_64 = 0;
>> +     struct xhci_ctrl *ctrl = udev->controller;
>> +
>> +     virt_dev = ctrl->devs[udev->slot_id];
>> +
>> +     BUG_ON(!virt_dev);
>> +
>> +     /* Extract the EP0 and Slot Ctrl */
>> +     ep0_ctx = xhci_get_ep_ctx(ctrl, virt_dev->in_ctx, 0);
>> +     slot_ctx = xhci_get_slot_ctx(ctrl, virt_dev->in_ctx);
>> +
>> +     /* Only the control endpoint is valid - one endpoint context */
>> +     slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | 0);
>> +
>> +     switch (udev->speed) {
>> +     case USB_SPEED_SUPER:
>> +             slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_SS);
>> +             break;
>> +     case USB_SPEED_HIGH:
>> +             slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_HS);
>> +             break;
>> +     case USB_SPEED_FULL:
>> +             slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_FS);
>> +             break;
>> +     case USB_SPEED_LOW:
>> +             slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_LS);
>> +             break;
>> +     default:
>> +             /* Speed was set earlier, this shouldn't happen. */
>> +             BUG();
>> +     }
>> +
>> +     /* Extract the root hub port number */
>> +     if (hop->parent)
>> +             while (hop->parent->parent)
>> +                     hop = hop->parent;
>> +     port_num = hop->portnr;
>> +     debug("port_num = %d\n", port_num);
>> +
>> +     slot_ctx->dev_info2 |=
>> +                     cpu_to_le32(((port_num & ROOT_HUB_PORT_MASK) <<
>> +                             ROOT_HUB_PORT_SHIFT));
>> +
>> +     /* Step 4 - ring already allocated */
>> +     /* Step 5 */
>> +     ep0_ctx->ep_info2 = cpu_to_le32(CTRL_EP << EP_TYPE_SHIFT);
>> +     debug("SPEED = %d\n", udev->speed);
>> +
>> +     switch (udev->speed) {
>> +     case USB_SPEED_SUPER:
>> +             ep0_ctx->ep_info2 |= cpu_to_le32(((512 & MAX_PACKET_MASK) <<
>> +                                     MAX_PACKET_SHIFT));
>> +             debug("Setting Packet size = 512bytes\n");
>> +             break;
>> +     case USB_SPEED_HIGH:
>> +     /* USB core guesses at a 64-byte max packet first for FS devices */
>> +     case USB_SPEED_FULL:
>> +             ep0_ctx->ep_info2 |= cpu_to_le32(((64 & MAX_PACKET_MASK) <<
>> +                                     MAX_PACKET_SHIFT));
>> +             debug("Setting Packet size = 64bytes\n");
>> +             break;
>> +     case USB_SPEED_LOW:
>> +             ep0_ctx->ep_info2 |= cpu_to_le32(((8 & MAX_PACKET_MASK) <<
>> +                                     MAX_PACKET_SHIFT));
>> +             debug("Setting Packet size = 8bytes\n");
>> +             break;
>> +     default:
>> +             /* New speed? */
>> +             BUG();
>> +     }
>> +
>> +     /* EP 0 can handle "burst" sizes of 1, so Max Burst Size field is 0 */
>> +     ep0_ctx->ep_info2 |=
>> +                     cpu_to_le32(((0 & MAX_BURST_MASK) << MAX_BURST_SHIFT) |
>> +                     ((3 & ERROR_COUNT_MASK) << ERROR_COUNT_SHIFT));
>> +
>> +     trb_64 = (uintptr_t)virt_dev->eps[0].ring->first_seg->trbs;
>> +     ep0_ctx->deq = cpu_to_le64(trb_64 | virt_dev->eps[0].ring->cycle_state);
>> +
>> +     /* Steps 7 and 8 were done in xhci_alloc_virt_device() */
>> +
>> +     xhci_flush_cache((uint32_t)ep0_ctx, sizeof(struct xhci_ep_ctx));
>> +     xhci_flush_cache((uint32_t)slot_ctx, sizeof(struct xhci_slot_ctx));
>> +}
>> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
>> new file mode 100644
>> index 0000000..8340850
>> --- /dev/null
>> +++ b/drivers/usb/host/xhci-ring.c
>> @@ -0,0 +1,950 @@
>> +/*
>> + * USB HOST XHCI Controller stack
>> + *
>> + * Copyright (C) 2013 Samsung Electronics Co.Ltd
>> + *   Vivek Gautam <gautam.vivek@samsung.com>
>> + *   Vikas Sajjan <vikas.sajjan@samsung.com>
>> + *
>> + * Based on xHCI host controller driver in linux-kernel
>> + * by Sarah Sharp.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
>> + * MA 02110-1301 USA
>> + */
>
>
>
>> +
>> +#include <common.h>
>> +#include <asm/byteorder.h>
>> +#include <usb.h>
>> +#include <asm/io.h>
>> +#include <asm/unaligned.h>
>> +#include <asm-generic/errno.h>
>> +
>> +#include "xhci.h"
>> +
>> +/**
>> + * Is this TRB a link TRB or was the last TRB the last TRB in this event ring
>> + * segment?  I.e. would the updated event TRB pointer step off the end of the
>> + * event seg ?
>> + *
>> + * @param ctrl       Host controller data structure
>> + * @param ring       pointer to the ring
>> + * @param seg        poniter to the segment to which TRB belongs
>> + * @param trb        poniter to the ring trb
>> + * @return 1 if this TRB a link TRB else 0
>> + */
>> +static int last_trb(struct xhci_ctrl *ctrl, struct xhci_ring *ring,
>> +                     struct xhci_segment *seg, union xhci_trb *trb)
>> +{
>> +     if (ring == ctrl->event_ring)
>> +             return trb == &seg->trbs[TRBS_PER_SEGMENT];
>> +     else
>> +             return TRB_TYPE_LINK_LE32(trb->link.control);
>> +}
>> +
>> +/**
>> + * Does this link TRB point to the first segment in a ring,
>> + * or was the previous TRB the last TRB on the last segment in the ERST?
>> + *
>> + * @param ctrl       Host controller data structure
>> + * @param ring       pointer to the ring
>> + * @param seg        poniter to the segment to which TRB belongs
>> + * @param trb        poniter to the ring trb
>> + * @return 1 if this TRB is the last TRB on the last segment else 0
>> + */
>> +static bool last_trb_on_last_seg(struct xhci_ctrl *ctrl,
>> +                              struct xhci_ring *ring,
>> +                              struct xhci_segment *seg,
>> +                              union xhci_trb *trb)
>> +{
>> +     if (ring == ctrl->event_ring)
>> +             return ((trb == &seg->trbs[TRBS_PER_SEGMENT]) &&
>> +                     (seg->next == ring->first_seg));
>> +     else
>> +             return le32_to_cpu(trb->link.control) & LINK_TOGGLE;
>> +}
>> +
>> +/**
>> + * See Cycle bit rules. SW is the consumer for the event ring only.
>> + * Don't make a ring full of link TRBs.  That would be dumb and this would loop.
>> + *
>> + * If we've just enqueued a TRB that is in the middle of a TD (meaning the
>> + * chain bit is set), then set the chain bit in all the following link TRBs.
>> + * If we've enqueued the last TRB in a TD, make sure the following link TRBs
>> + * have their chain bit cleared (so that each Link TRB is a separate TD).
>> + *
>> + * Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit
>> + * set, but other sections talk about dealing with the chain bit set.  This was
>> + * fixed in the 0.96 specification errata, but we have to assume that all 0.95
>> + * xHCI hardware can't handle the chain bit being cleared on a link TRB.
>> + *
>> + * @param ctrl       Host controller data structure
>> + * @param ring       pointer to the ring
>> + * @param more_trbs_coming   flag to indicate whether more trbs
>> + *                           are expected or NOT.
>> + *                           Will you enqueue more TRBs before calling
>> + *                           prepare_ring()?
>> + * @return none
>> + */
>> +static void inc_enq(struct xhci_ctrl *ctrl, struct xhci_ring *ring,
>> +                                             bool more_trbs_coming)
>> +{
>> +     u32 chain;
>> +     union xhci_trb *next;
>> +
>> +     chain = le32_to_cpu(ring->enqueue->generic.field[3]) & TRB_CHAIN;
>> +     next = ++(ring->enqueue);
>> +
>> +     /*
>> +      * Update the dequeue pointer further if that was a link TRB or we're at
>> +      * the end of an event ring segment (which doesn't have link TRBS)
>> +      */
>> +     while (last_trb(ctrl, ring, ring->enq_seg, next)) {
>> +             if (ring != ctrl->event_ring) {
>> +                     /*
>> +                      * If the caller doesn't plan on enqueueing more
>> +                      * TDs before ringing the doorbell, then we
>> +                      * don't want to give the link TRB to the
>> +                      * hardware just yet.  We'll give the link TRB
>> +                      * back in prepare_ring() just before we enqueue
>> +                      * the TD at the top of the ring.
>> +                      */
>> +                     if (!chain && !more_trbs_coming)
>> +                             break;
>> +
>> +                     /*
>> +                      * If we're not dealing with 0.95 hardware or
>> +                      * isoc rings on AMD 0.96 host,
>> +                      * carry over the chain bit of the previous TRB
>> +                      * (which may mean the chain bit is cleared).
>> +                      */
>> +                     next->link.control &= cpu_to_le32(~TRB_CHAIN);
>> +                     next->link.control |= cpu_to_le32(chain);
>> +
>> +                     next->link.control ^= cpu_to_le32(TRB_CYCLE);
>> +                     xhci_flush_cache((uint32_t)next,
>> +                                             sizeof(union xhci_trb));
>> +             }
>> +             /* Toggle the cycle bit after the last ring segment. */
>> +             if (last_trb_on_last_seg(ctrl, ring,
>> +                                     ring->enq_seg, next))
>> +                     ring->cycle_state = (ring->cycle_state ? 0 : 1);
>> +
>> +             ring->enq_seg = ring->enq_seg->next;
>> +             ring->enqueue = ring->enq_seg->trbs;
>> +             next = ring->enqueue;
>> +     }
>> +}
>> +
>> +/**
>> + * See Cycle bit rules. SW is the consumer for the event ring only.
>> + * Don't make a ring full of link TRBs.  That would be dumb and this would loop.
>> + *
>> + * @param ctrl       Host controller data structure
>> + * @param ring       Ring whose Dequeue TRB pointer needs to be incremented.
>> + * return none
>> + */
>> +static void inc_deq(struct xhci_ctrl *ctrl, struct xhci_ring *ring)
>> +{
>> +     do {
>> +             /*
>> +              * Update the dequeue pointer further if that was a link TRB or
>> +              * we're at the end of an event ring segment (which doesn't have
>> +              * link TRBS)
>> +              */
>> +             if (last_trb(ctrl, ring, ring->deq_seg, ring->dequeue)) {
>> +                     if (ring == ctrl->event_ring &&
>> +                                     last_trb_on_last_seg(ctrl, ring,
>> +                                             ring->deq_seg, ring->dequeue)) {
>> +                             ring->cycle_state = (ring->cycle_state ? 0 : 1);
>> +                     }
>> +                     ring->deq_seg = ring->deq_seg->next;
>> +                     ring->dequeue = ring->deq_seg->trbs;
>> +             } else {
>> +                     ring->dequeue++;
>> +             }
>> +     } while (last_trb(ctrl, ring, ring->deq_seg, ring->dequeue));
>> +}
>> +
>> +/**
>> + * Generic function for queueing a TRB on a ring.
>> + * The caller must have checked to make sure there's room on the ring.
>> + *
>> + * @param    more_trbs_coming:   Will you enqueue more TRBs before calling
>> + *                           prepare_ring()?
>> + * @param ctrl       Host controller data structure
>> + * @param ring       pointer to the ring
>> + * @param more_trbs_coming   flag to indicate whether more trbs
>> + * @param trb_fields pointer to trb field array containing TRB contents
>> + * @return pointer to the enqueued trb
>> + */
>> +static struct xhci_generic_trb *queue_trb(struct xhci_ctrl *ctrl,
>> +                                       struct xhci_ring *ring,
>> +                                       bool more_trbs_coming,
>> +                                       unsigned int *trb_fields)
>> +{
>> +     struct xhci_generic_trb *trb;
>> +     int i;
>> +
>> +     trb = &ring->enqueue->generic;
>> +
>> +     for (i = 0; i < 4; i++)
>> +             trb->field[i] = cpu_to_le32(trb_fields[i]);
>> +
>> +     xhci_flush_cache((uint32_t)trb, sizeof(struct xhci_generic_trb));
>> +
>> +     inc_enq(ctrl, ring, more_trbs_coming);
>> +
>> +     return trb;
>> +}
>> +
>> +/**
>> + * Does various checks on the endpoint ring, and makes it ready
>> + * to queue num_trbs.
>> + *
>> + * @param ctrl               Host controller data structure
>> + * @param ep_ring    pointer to the EP Transfer Ring
>> + * @param ep_state   State of the End Point
>> + * @return error code in case of invalid ep_state, 0 on success
>> + */
>> +static int prepare_ring(struct xhci_ctrl *ctrl, struct xhci_ring *ep_ring,
>> +                                                     u32 ep_state)
>> +{
>> +     union xhci_trb *next = ep_ring->enqueue;
>> +
>> +     /* Make sure the endpoint has been added to xHC schedule */
>> +     switch (ep_state) {
>> +     case EP_STATE_DISABLED:
>> +             /*
>> +              * USB core changed config/interfaces without notifying us,
>> +              * or hardware is reporting the wrong state.
>> +              */
>> +             printf("WARN urb submitted to disabled ep\n");
>> +             return -ENOENT;
>> +     case EP_STATE_ERROR:
>> +             printf("WARN waiting for error on ep to be cleared\n");
>> +             return -EINVAL;
>> +     case EP_STATE_HALTED:
>> +             printf("WARN halted endpoint, queueing URB anyway.\n");
>> +     case EP_STATE_STOPPED:
>> +     case EP_STATE_RUNNING:
>> +             debug("EP STATE RUNNING.\n");
>> +             break;
>> +     default:
>> +             printf("ERROR unknown endpoint state for ep\n");
>> +             return -EINVAL;
>> +     }
>> +
>> +     while (last_trb(ctrl, ep_ring, ep_ring->enq_seg, next)) {
>> +             /*
>> +              * If we're not dealing with 0.95 hardware or isoc rings
>> +              * on AMD 0.96 host, clear the chain bit.
>> +              */
>> +             next->link.control &= cpu_to_le32(~TRB_CHAIN);
>> +
>> +             next->link.control ^= cpu_to_le32(TRB_CYCLE);
>> +
>> +             xhci_flush_cache((uint32_t)next, sizeof(union xhci_trb));
>> +
>> +             /* Toggle the cycle bit after the last ring segment. */
>> +             if (last_trb_on_last_seg(ctrl, ep_ring,
>> +                                     ep_ring->enq_seg, next))
>> +                     ep_ring->cycle_state = (ep_ring->cycle_state ? 0 : 1);
>> +             ep_ring->enq_seg = ep_ring->enq_seg->next;
>> +             ep_ring->enqueue = ep_ring->enq_seg->trbs;
>> +             next = ep_ring->enqueue;
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +/**
>> + * Generic function for queueing a command TRB on the command ring.
>> + * Check to make sure there's room on the command ring for one command TRB.
>> + *
>> + * @param ctrl               Host controller data structure
>> + * @param ptr                Pointer address to write in the first two fields (opt.)
>> + * @param slot_id    Slot ID to encode in the flags field (opt.)
>> + * @param ep_index   Endpoint index to encode in the flags field (opt.)
>> + * @param cmd                Command type to enqueue
>> + * @return none
>> + */
>> +void xhci_queue_command(struct xhci_ctrl *ctrl, u8 *ptr, u32 slot_id,
>> +                     u32 ep_index, trb_type cmd)
>> +{
>> +     u32 fields[4];
>> +     u64 val_64 = (uintptr_t)ptr;
>> +
>> +     BUG_ON(prepare_ring(ctrl, ctrl->cmd_ring, EP_STATE_RUNNING));
>> +
>> +     fields[0] = lower_32_bits(val_64);
>> +     fields[1] = upper_32_bits(val_64);
>> +     fields[2] = 0;
>> +     fields[3] = TRB_TYPE(cmd) | EP_ID_FOR_TRB(ep_index) |
>> +                 SLOT_ID_FOR_TRB(slot_id) | ctrl->cmd_ring->cycle_state;
>> +
>> +     queue_trb(ctrl, ctrl->cmd_ring, false, fields);
>> +
>> +     /* Ring the command ring doorbell */
>> +     xhci_writel(&ctrl->dba->doorbell[0], DB_VALUE_HOST);
>> +}
>> +
>> +/**
>> + * The TD size is the number of bytes remaining in the TD (including this TRB),
>> + * right shifted by 10.
>> + * It must fit in bits 21:17, so it can't be bigger than 31.
>> + *
>> + * @param remainder  remaining packets to be sent
>> + * @return remainder if remainder is less than max else max
>> + */
>> +static u32 xhci_td_remainder(unsigned int remainder)
>> +{
>> +     u32 max = (1 << (21 - 17 + 1)) - 1;
>> +
>> +     if ((remainder >> 10) >= max)
>> +             return max << 17;
>> +     else
>> +             return (remainder >> 10) << 17;
>> +}
>> +
>> +/**
>> + * Finds out the remanining packets to be sent
>> + *
>> + * @param running_total      total size sent so far
>> + * @param trb_buff_len       length of the TRB Buffer
>> + * @param total_packet_count total packet count
>> + * @param maxpacketsize              max packet size of current pipe
>> + * @param num_trbs_left              number of TRBs left to be processed
>> + * @return 0 if running_total or trb_buff_len is 0, else remainder
>> + */
>> +static u32 xhci_v1_0_td_remainder(int running_total,
>> +                             int trb_buff_len,
>> +                             unsigned int total_packet_count,
>> +                             int maxpacketsize,
>> +                             unsigned int num_trbs_left)
>> +{
>> +     int packets_transferred;
>> +
>> +     /* One TRB with a zero-length data packet. */
>> +     if (num_trbs_left == 0 || (running_total == 0 && trb_buff_len == 0))
>> +             return 0;
>> +
>> +     /*
>> +      * All the TRB queueing functions don't count the current TRB in
>> +      * running_total.
>> +      */
>> +     packets_transferred = (running_total + trb_buff_len) / maxpacketsize;
>> +
>> +     if ((total_packet_count - packets_transferred) > 31)
>> +             return 31 << 17;
>> +     return (total_packet_count - packets_transferred) << 17;
>> +}
>> +
>> +/**
>> + * Ring the doorbell of the End Point
>> + *
>> + * @param udev               pointer to the USB device structure
>> + * @param ep_index   index of the endpoint
>> + * @param start_cycle        cycle flag of the first TRB
>> + * @param start_trb  pionter to the first TRB
>> + * @return none
>> + */
>> +static void giveback_first_trb(struct usb_device *udev, int ep_index,
>> +                             int start_cycle,
>> +                             struct xhci_generic_trb *start_trb)
>> +{
>> +     struct xhci_ctrl *ctrl = udev->controller;
>> +
>> +     /*
>> +      * Pass all the TRBs to the hardware at once and make sure this write
>> +      * isn't reordered.
>> +      */
>> +     if (start_cycle)
>> +             start_trb->field[3] |= cpu_to_le32(start_cycle);
>> +     else
>> +             start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
>> +
>> +     xhci_flush_cache((uint32_t)start_trb, sizeof(struct xhci_generic_trb));
>> +
>> +     /* Ringing EP doorbell here */
>> +     xhci_writel(&ctrl->dba->doorbell[udev->slot_id],
>> +                             DB_VALUE(ep_index, 0));
>> +
>> +     return;
>> +}
>> +
>> +/**** POLLING mechanism for XHCI ****/
>> +
>> +/**
>> + * Finalizes a handled event TRB by advancing our dequeue pointer and giving
>> + * the TRB back to the hardware for recycling. Must call this exactly once at
>> + * the end of each event handler, and not touch the TRB again afterwards.
>> + *
>> + * @param ctrl       Host controller data structure
>> + * @return none
>> + */
>> +void xhci_acknowledge_event(struct xhci_ctrl *ctrl)
>> +{
>> +     /* Advance our dequeue pointer to the next event */
>> +     inc_deq(ctrl, ctrl->event_ring);
>> +
>> +     /* Inform the hardware */
>> +     xhci_writeq(&ctrl->ir_set->erst_dequeue,
>> +             (uintptr_t)ctrl->event_ring->dequeue | ERST_EHB);
>> +}
>> +
>> +/**
>> + * Checks if there is a new event to handle on the event ring.
>> + *
>> + * @param ctrl       Host controller data structure
>> + * @return 0 if failure else 1 on success
>> + */
>> +static int event_ready(struct xhci_ctrl *ctrl)
>> +{
>> +     union xhci_trb *event;
>> +
>> +     xhci_inval_cache((uint32_t)ctrl->event_ring->dequeue,
>> +                                     sizeof(union xhci_trb));
>> +
>> +     event = ctrl->event_ring->dequeue;
>> +
>> +     /* Does the HC or OS own the TRB? */
>> +     if ((le32_to_cpu(event->event_cmd.flags) & TRB_CYCLE) !=
>> +             ctrl->event_ring->cycle_state)
>> +             return 0;
>> +
>> +     return 1;
>> +}
>> +
>> +/**
>> + * Waits for a specific type of event and returns it. Discards unexpected
>> + * events. Caller *must* call xhci_acknowledge_event() after it is finished
>> + * processing the event, and must not access the returned pointer afterwards.
>> + *
>> + * @param ctrl               Host controller data structure
>> + * @param expected   TRB type expected from Event TRB
>> + * @return pointer to event trb
>> + */
>> +union xhci_trb *xhci_wait_for_event(struct xhci_ctrl *ctrl, trb_type expected)
>> +{
>> +     trb_type type;
>> +     unsigned long ts = get_timer(0);
>> +
>> +     do {
>> +             union xhci_trb *event = ctrl->event_ring->dequeue;
>> +
>> +             if (!event_ready(ctrl))
>> +                     continue;
>> +
>> +             type = TRB_FIELD_TO_TYPE(le32_to_cpu(event->event_cmd.flags));
>> +             if (type == expected)
>> +                     return event;
>> +
>> +             if (type == TRB_PORT_STATUS)
>> +             /* TODO: remove this once enumeration has been reworked */
>> +                     /*
>> +                      * Port status change events always have a
>> +                      * successful completion code
>> +                      */
>> +                     BUG_ON(GET_COMP_CODE(
>> +                             le32_to_cpu(event->generic.field[2])) !=
>> +                                                             COMP_SUCCESS);
>> +             else
>> +                     printf("Unexpected XHCI event TRB, skipping... "
>> +                             "(%08x %08x %08x %08x)\n",
>> +                             le32_to_cpu(event->generic.field[0]),
>> +                             le32_to_cpu(event->generic.field[1]),
>> +                             le32_to_cpu(event->generic.field[2]),
>> +                             le32_to_cpu(event->generic.field[3]));
>> +
>> +             xhci_acknowledge_event(ctrl);
>> +     } while (get_timer(ts) < XHCI_TIMEOUT);
>> +
>> +     if (expected == TRB_TRANSFER)
>> +             return NULL;
>> +
>> +     printf("XHCI timeout on event type %d... cannot recover.\n", expected);
>> +     BUG();
>> +}
>> +
>> +/*
>> + * Stops transfer processing for an endpoint and throws away all unprocessed
>> + * TRBs by setting the xHC's dequeue pointer to our enqueue pointer. The next
>> + * xhci_bulk_tx/xhci_ctrl_tx on this enpoint will add new transfers there and
>> + * ring the doorbell, causing this endpoint to start working again.
>> + * (Careful: This will BUG() when there was no transfer in progress. Shouldn't
>> + * happen in practice for current uses and is too complicated to fix right now.)
>> + */
>> +static void abort_td(struct usb_device *udev, int ep_index)
>> +{
>> +     struct xhci_ctrl *ctrl = udev->controller;
>> +     struct xhci_ring *ring =  ctrl->devs[udev->slot_id]->eps[ep_index].ring;
>> +     union xhci_trb *event;
>> +     u32 field;
>> +
>> +     xhci_queue_command(ctrl, NULL, udev->slot_id, ep_index, TRB_STOP_RING);
>> +
>> +     event = xhci_wait_for_event(ctrl, TRB_TRANSFER);
>> +     field = le32_to_cpu(event->trans_event.flags);
>> +     BUG_ON(TRB_TO_SLOT_ID(field) != udev->slot_id);
>> +     BUG_ON(TRB_TO_EP_INDEX(field) != ep_index);
>> +     BUG_ON(GET_COMP_CODE(le32_to_cpu(event->trans_event.transfer_len
>> +             != COMP_STOP)));
>> +     xhci_acknowledge_event(ctrl);
>> +
>> +     event = xhci_wait_for_event(ctrl, TRB_COMPLETION);
>> +     BUG_ON(TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags))
>> +             != udev->slot_id || GET_COMP_CODE(le32_to_cpu(
>> +             event->event_cmd.status)) != COMP_SUCCESS);
>> +     xhci_acknowledge_event(ctrl);
>> +
>> +     xhci_queue_command(ctrl, (void *)((uintptr_t)ring->enqueue |
>> +             ring->cycle_state), udev->slot_id, ep_index, TRB_SET_DEQ);
>> +     event = xhci_wait_for_event(ctrl, TRB_COMPLETION);
>> +     BUG_ON(TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags))
>> +             != udev->slot_id || GET_COMP_CODE(le32_to_cpu(
>> +             event->event_cmd.status)) != COMP_SUCCESS);
>> +     xhci_acknowledge_event(ctrl);
>> +}
>> +
>> +static void record_transfer_result(struct usb_device *udev,
>> +                                union xhci_trb *event, int length)
>> +{
>> +     udev->act_len = min(length, length -
>> +             EVENT_TRB_LEN(le32_to_cpu(event->trans_event.transfer_len)));
>> +
>> +     switch (GET_COMP_CODE(le32_to_cpu(event->trans_event.transfer_len))) {
>> +     case COMP_SUCCESS:
>> +             BUG_ON(udev->act_len != length);
>> +             /* fallthrough */
>> +     case COMP_SHORT_TX:
>> +             udev->status = 0;
>> +             break;
>> +     case COMP_STALL:
>> +             udev->status = USB_ST_STALLED;
>> +             break;
>> +     case COMP_DB_ERR:
>> +     case COMP_TRB_ERR:
>> +             udev->status = USB_ST_BUF_ERR;
>> +             break;
>> +     case COMP_BABBLE:
>> +             udev->status = USB_ST_BABBLE_DET;
>> +             break;
>> +     default:
>> +             udev->status = 0x80;  /* USB_ST_TOO_LAZY_TO_MAKE_A_NEW_MACRO */
>> +     }
>> +}
>> +
>> +/**** Bulk and Control transfer methods ****/
>> +/**
>> + * Queues up the BULK Request
>> + *
>> + * @param udev               pointer to the USB device structure
>> + * @param pipe               contains the DIR_IN or OUT , devnum
>> + * @param length     length of the buffer
>> + * @param buffer     buffer to be read/written based on the request
>> + * @return returns 0 if successful else -1 on failure
>> + */
>> +int xhci_bulk_tx(struct usb_device *udev, unsigned long pipe,
>> +                     int length, void *buffer)
>> +{
>> +     int num_trbs = 0;
>> +     struct xhci_generic_trb *start_trb;
>> +     bool first_trb = 0;
>> +     int start_cycle;
>> +     u32 field = 0;
>> +     u32 length_field = 0;
>> +     struct xhci_ctrl *ctrl = udev->controller;
>> +     int slot_id = udev->slot_id;
>> +     int ep_index;
>> +     struct xhci_virt_device *virt_dev;
>> +     struct xhci_ep_ctx *ep_ctx;
>> +     struct xhci_ring *ring;         /* EP transfer ring */
>> +     union xhci_trb *event;
>> +
>> +     int running_total, trb_buff_len;
>> +     unsigned int total_packet_count;
>> +     int maxpacketsize;
>> +     u64 addr;
>> +     int ret;
>> +     u32 trb_fields[4];
>> +     u64 val_64 = (uintptr_t)buffer;
>> +
>> +     debug("dev=%p, pipe=%lx, buffer=%p, length=%d\n",
>> +             udev, pipe, buffer, length);
>> +
>> +     ep_index = usb_pipe_ep_index(pipe);
>> +     virt_dev = ctrl->devs[slot_id];
>> +
>> +     xhci_inval_cache((uint32_t)virt_dev->out_ctx->bytes,
>> +                                     virt_dev->out_ctx->size);
>> +
>> +     ep_ctx = xhci_get_ep_ctx(ctrl, virt_dev->out_ctx, ep_index);
>> +
>> +     ring = virt_dev->eps[ep_index].ring;
>> +     /*
>> +      * How much data is (potentially) left before the 64KB boundary?
>> +      * XHCI Spec puts restriction( TABLE 49 and 6.4.1 section of XHCI Spec)
>> +      * that the buffer should not span 64KB boundary. if so
>> +      * we send request in more than 1 TRB by chaining them.
>> +      */
>> +     running_total = TRB_MAX_BUFF_SIZE -
>> +                     (lower_32_bits(val_64) & (TRB_MAX_BUFF_SIZE - 1));
>> +     trb_buff_len = running_total;
>> +     running_total &= TRB_MAX_BUFF_SIZE - 1;
>> +
>> +     /*
>> +      * If there's some data on this 64KB chunk, or we have to send a
>> +      * zero-length transfer, we need at least one TRB
>> +      */
>> +     if (running_total != 0 || length == 0)
>> +             num_trbs++;
>> +
>> +     /* How many more 64KB chunks to transfer, how many more TRBs? */
>> +     while (running_total < length) {
>> +             num_trbs++;
>> +             running_total += TRB_MAX_BUFF_SIZE;
>> +     }
>> +
>> +     /*
>> +      * XXX: Calling routine prepare_ring() called in place of
>> +      * prepare_trasfer() as there in 'Linux' since we are not
>> +      * maintaining multiple TDs/transfer at the same time.
>> +      */
>> +     ret = prepare_ring(ctrl, ring,
>> +                        le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK);
>> +     if (ret < 0)
>> +             return ret;
>> +
>> +     /*
>> +      * Don't give the first TRB to the hardware (by toggling the cycle bit)
>> +      * until we've finished creating all the other TRBs.  The ring's cycle
>> +      * state may change as we enqueue the other TRBs, so save it too.
>> +      */
>> +     start_trb = &ring->enqueue->generic;
>> +     start_cycle = ring->cycle_state;
>> +
>> +     running_total = 0;
>> +     maxpacketsize = usb_maxpacket(udev, pipe);
>> +
>> +     total_packet_count = DIV_ROUND_UP(length, maxpacketsize);
>> +
>> +     /* How much data is in the first TRB? */
>> +     /*
>> +      * How much data is (potentially) left before the 64KB boundary?
>> +      * XHCI Spec puts restriction( TABLE 49 and 6.4.1 section of XHCI Spec)
>> +      * that the buffer should not span 64KB boundary. if so
>> +      * we send request in more than 1 TRB by chaining them.
>> +      */
>> +     addr = val_64;
>> +
>> +     if (trb_buff_len > length)
>> +             trb_buff_len = length;
>> +
>> +     first_trb = true;
>> +
>> +     /* flush the buffer before use */
>> +     xhci_flush_cache((uint32_t)buffer, length);
>> +
>> +     /* Queue the first TRB, even if it's zero-length */
>> +     do {
>> +             u32 remainder = 0;
>> +             field = 0;
>> +             /* Don't change the cycle bit of the first TRB until later */
>> +             if (first_trb) {
>> +                     first_trb = false;
>> +                     if (start_cycle == 0)
>> +                             field |= TRB_CYCLE;
>> +             } else {
>> +                     field |= ring->cycle_state;
>> +             }
>> +
>> +             /*
>> +              * Chain all the TRBs together; clear the chain bit in the last
>> +              * TRB to indicate it's the last TRB in the chain.
>> +              */
>> +             if (num_trbs > 1)
>> +                     field |= TRB_CHAIN;
>> +             else
>> +                     field |= TRB_IOC;
>> +
>> +             /* Only set interrupt on short packet for IN endpoints */
>> +             if (usb_pipein(pipe))
>> +                     field |= TRB_ISP;
>> +
>> +             /* Set the TRB length, TD size, and interrupter fields. */
>> +             if (HC_VERSION(xhci_readl(&ctrl->hccr->cr_capbase)) < 0x100)
>> +                     remainder = xhci_td_remainder(length - running_total);
>> +             else
>> +                     remainder = xhci_v1_0_td_remainder(running_total,
>> +                                                        trb_buff_len,
>> +                                                        total_packet_count,
>> +                                                        maxpacketsize,
>> +                                                        num_trbs - 1);
>> +
>> +             length_field = ((trb_buff_len & TRB_LEN_MASK) |
>> +                             remainder |
>> +                             ((0 & TRB_INTR_TARGET_MASK) <<
>> +                             TRB_INTR_TARGET_SHIFT));
>> +
>> +             trb_fields[0] = lower_32_bits(addr);
>> +             trb_fields[1] = upper_32_bits(addr);
>> +             trb_fields[2] = length_field;
>> +             trb_fields[3] = field | (TRB_NORMAL << TRB_TYPE_SHIFT);
>> +
>> +             queue_trb(ctrl, ring, (num_trbs > 1), trb_fields);
>> +
>> +             --num_trbs;
>> +
>> +             running_total += trb_buff_len;
>> +
>> +             /* Calculate length for next transfer */
>> +             addr += trb_buff_len;
>> +             trb_buff_len = min((length - running_total), TRB_MAX_BUFF_SIZE);
>> +     } while (running_total < length);
>> +
>> +     giveback_first_trb(udev, ep_index, start_cycle, start_trb);
>> +
>> +     event = xhci_wait_for_event(ctrl, TRB_TRANSFER);
>> +     if (!event) {
>> +             debug("XHCI bulk transfer timed out, aborting...\n");
>> +             abort_td(udev, ep_index);
>> +             udev->status = USB_ST_NAK_REC;  /* closest thing to a timeout */
>> +             udev->act_len = 0;
>> +             return -1;
>> +     }
>> +     field = le32_to_cpu(event->trans_event.flags);
>> +
>> +     BUG_ON(TRB_TO_SLOT_ID(field) != slot_id);
>> +     BUG_ON(TRB_TO_EP_INDEX(field) != ep_index);
>> +     BUG_ON(*(void **)(uintptr_t)le64_to_cpu(event->trans_event.buffer) -
>> +             buffer > (size_t)length);
>> +
>> +     record_transfer_result(udev, event, length);
>> +     xhci_acknowledge_event(ctrl);
>> +     xhci_inval_cache((uint32_t)buffer, length);
>> +
>> +     return (udev->status != USB_ST_NOT_PROC) ? 0 : -1;
>> +}
>> +
>> +/**
>> + * Queues up the Control Transfer Request
>> + *
>> + * @param udev       pointer to the USB device structure
>> + * @param pipe               contains the DIR_IN or OUT , devnum
>> + * @param req                request type
>> + * @param length     length of the buffer
>> + * @param buffer     buffer to be read/written based on the request
>> + * @return returns 0 if successful else -1 on failure
>> + */
>> +int xhci_ctrl_tx(struct usb_device *udev, unsigned long pipe,
>> +                     struct devrequest *req, int length,
>> +                     void *buffer)
>> +{
>> +     int ret;
>> +     int start_cycle;
>> +     int num_trbs;
>> +     u32 field;
>> +     u32 length_field;
>> +     u64 buf_64 = 0;
>> +     struct xhci_generic_trb *start_trb;
>> +     struct xhci_ctrl *ctrl = udev->controller;
>> +     int slot_id = udev->slot_id;
>> +     int ep_index;
>> +     u32 trb_fields[4];
>> +     struct xhci_virt_device *virt_dev = ctrl->devs[slot_id];
>> +     struct xhci_ring *ep_ring;
>> +     union xhci_trb *event;
>> +
>> +     debug("req=%u (%#x), type=%u (%#x), value=%u (%#x), index=%u\n",
>> +             req->request, req->request,
>> +             req->requesttype, req->requesttype,
>> +             le16_to_cpu(req->value), le16_to_cpu(req->value),
>> +             le16_to_cpu(req->index));
>> +
>> +     ep_index = usb_pipe_ep_index(pipe);
>> +
>> +     ep_ring = virt_dev->eps[ep_index].ring;
>> +
>> +     /*
>> +      * Check to see if the max packet size for the default control
>> +      * endpoint changed during FS device enumeration
>> +      */
>> +     if (udev->speed == USB_SPEED_FULL) {
>> +             ret = xhci_check_maxpacket(udev);
>> +             if (ret < 0)
>> +                     return ret;
>> +     }
>> +
>> +     xhci_inval_cache((uint32_t)virt_dev->out_ctx->bytes,
>> +                             virt_dev->out_ctx->size);
>> +
>> +     struct xhci_ep_ctx *ep_ctx = NULL;
>> +     ep_ctx = xhci_get_ep_ctx(ctrl, virt_dev->out_ctx, ep_index);
>> +
>> +     /* 1 TRB for setup, 1 for status */
>> +     num_trbs = 2;
>> +     /*
>> +      * Don't need to check if we need additional event data and normal TRBs,
>> +      * since data in control transfers will never get bigger than 16MB
>> +      * XXX: can we get a buffer that crosses 64KB boundaries?
>> +      */
>> +
>> +     if (length > 0)
>> +             num_trbs++;
>> +     /*
>> +      * XXX: Calling routine prepare_ring() called in place of
>> +      * prepare_trasfer() as there in 'Linux' since we are not
>> +      * maintaining multiple TDs/transfer at the same time.
>> +      */
>> +     ret = prepare_ring(ctrl, ep_ring,
>> +                             le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK);
>> +
>> +     if (ret < 0)
>> +             return ret;
>> +
>> +     /*
>> +      * Don't give the first TRB to the hardware (by toggling the cycle bit)
>> +      * until we've finished creating all the other TRBs.  The ring's cycle
>> +      * state may change as we enqueue the other TRBs, so save it too.
>> +      */
>> +     start_trb = &ep_ring->enqueue->generic;
>> +     start_cycle = ep_ring->cycle_state;
>> +
>> +     debug("start_trb %p, start_cycle %d\n", start_trb, start_cycle);
>> +
>> +     /* Queue setup TRB - see section 6.4.1.2.1 */
>> +     /* FIXME better way to translate setup_packet into two u32 fields? */
>> +     field = 0;
>> +     field |= TRB_IDT | (TRB_SETUP << TRB_TYPE_SHIFT);
>> +     if (start_cycle == 0)
>> +             field |= 0x1;
>> +
>> +     /* xHCI 1.0 6.4.1.2.1: Transfer Type field */
>> +     if (HC_VERSION(xhci_readl(&ctrl->hccr->cr_capbase)) == 0x100) {
>> +             if (length > 0) {
>> +                     if (req->requesttype & USB_DIR_IN)
>> +                             field |= (TRB_DATA_IN << TRB_TX_TYPE_SHIFT);
>> +                     else
>> +                             field |= (TRB_DATA_OUT << TRB_TX_TYPE_SHIFT);
>> +             }
>> +     }
>> +
>> +     debug("req->requesttype = %d, req->request = %d,"
>> +             "le16_to_cpu(req->value) = %d,"
>> +             "le16_to_cpu(req->index) = %d,"
>> +             "le16_to_cpu(req->length) = %d\n",
>> +             req->requesttype, req->request, le16_to_cpu(req->value),
>> +             le16_to_cpu(req->index), le16_to_cpu(req->length));
>> +
>> +     trb_fields[0] = req->requesttype | req->request << 8 |
>> +                             le16_to_cpu(req->value) << 16;
>> +     trb_fields[1] = le16_to_cpu(req->index) |
>> +                     le16_to_cpu(req->length) << 16;
>> +     /* TRB_LEN | (TRB_INTR_TARGET) */
>> +     trb_fields[2] = (8 | ((0 & TRB_INTR_TARGET_MASK) <<
>> +                     TRB_INTR_TARGET_SHIFT));
>> +     /* Immediate data in pointer */
>> +     trb_fields[3] = field;
>> +     queue_trb(ctrl, ep_ring, true, trb_fields);
>> +
>> +     /* Re-initializing field to zero */
>> +     field = 0;
>> +     /* If there's data, queue data TRBs */
>> +     /* Only set interrupt on short packet for IN endpoints */
>> +     if (usb_pipein(pipe))
>> +             field = TRB_ISP | (TRB_DATA << TRB_TYPE_SHIFT);
>> +     else
>> +             field = (TRB_DATA << TRB_TYPE_SHIFT);
>> +
>> +     length_field = (length & TRB_LEN_MASK) | xhci_td_remainder(length) |
>> +                     ((0 & TRB_INTR_TARGET_MASK) << TRB_INTR_TARGET_SHIFT);
>> +     debug("length_field = %d, length = %d,"
>> +             "xhci_td_remainder(length) = %d , TRB_INTR_TARGET(0) = %d\n",
>> +             length_field, (length & TRB_LEN_MASK),
>> +             xhci_td_remainder(length), 0);
>> +
>> +     if (length > 0) {
>> +             if (req->requesttype & USB_DIR_IN)
>> +                     field |= TRB_DIR_IN;
>> +             buf_64 = (uintptr_t)buffer;
>> +
>> +             trb_fields[0] = lower_32_bits(buf_64);
>> +             trb_fields[1] = upper_32_bits(buf_64);
>> +             trb_fields[2] = length_field;
>> +             trb_fields[3] = field | ep_ring->cycle_state;
>> +
>> +             xhci_flush_cache((uint32_t)buffer, length);
>> +             queue_trb(ctrl, ep_ring, true, trb_fields);
>> +     }
>> +
>> +     /*
>> +      * Queue status TRB -
>> +      * see Table 7 and sections 4.11.2.2 and 6.4.1.2.3
>> +      */
>> +
>> +     /* If the device sent data, the status stage is an OUT transfer */
>> +     field = 0;
>> +     if (length > 0 && req->requesttype & USB_DIR_IN)
>> +             field = 0;
>> +     else
>> +             field = TRB_DIR_IN;
>> +
>> +     trb_fields[0] = 0;
>> +     trb_fields[1] = 0;
>> +     trb_fields[2] = ((0 & TRB_INTR_TARGET_MASK) << TRB_INTR_TARGET_SHIFT);
>> +             /* Event on completion */
>> +     trb_fields[3] = field | TRB_IOC |
>> +                     (TRB_STATUS << TRB_TYPE_SHIFT) |
>> +                     ep_ring->cycle_state;
>> +
>> +     queue_trb(ctrl, ep_ring, false, trb_fields);
>> +
>> +     giveback_first_trb(udev, ep_index, start_cycle, start_trb);
>> +
>> +     event = xhci_wait_for_event(ctrl, TRB_TRANSFER);
>> +     if (!event)
>> +             goto abort;
>> +     field = le32_to_cpu(event->trans_event.flags);
>> +
>> +     BUG_ON(TRB_TO_SLOT_ID(field) != slot_id);
>> +     BUG_ON(TRB_TO_EP_INDEX(field) != ep_index);
>> +
>> +     record_transfer_result(udev, event, length);
>> +     xhci_acknowledge_event(ctrl);
>> +
>> +     /* Invalidate buffer to make it available to usb-core */
>> +     if (length > 0)
>> +             xhci_inval_cache((uint32_t)buffer, length);
>> +
>> +     if (GET_COMP_CODE(le32_to_cpu(event->trans_event.transfer_len))
>> +                     == COMP_SHORT_TX) {
>> +             /* Short data stage, clear up additional status stage event */
>> +             event = xhci_wait_for_event(ctrl, TRB_TRANSFER);
>> +             if (!event)
>> +                     goto abort;
>> +             BUG_ON(TRB_TO_SLOT_ID(field) != slot_id);
>> +             BUG_ON(TRB_TO_EP_INDEX(field) != ep_index);
>> +             xhci_acknowledge_event(ctrl);
>> +     }
>> +
>> +     return (udev->status != USB_ST_NOT_PROC) ? 0 : -1;
>> +
>> +abort:
>> +     debug("XHCI control transfer timed out, aborting...\n");
>> +     abort_td(udev, ep_index);
>> +     udev->status = USB_ST_NAK_REC;
>> +     udev->act_len = 0;
>> +     return -1;
>> +}
>> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
>> new file mode 100644
>> index 0000000..3e53e3d
>> --- /dev/null
>> +++ b/drivers/usb/host/xhci.c
>> @@ -0,0 +1,1040 @@
>> +/*
>> + * USB HOST XHCI Controller stack
>> + *
>> + * Copyright (C) 2013 Samsung Electronics Co.Ltd
>> + *   Vivek Gautam <gautam.vivek@samsung.com>
>> + *   Vikas Sajjan <vikas.sajjan@samsung.com>
>> + *
>> + * Based on xHCI host controller driver in linux-kernel
>> + * by Sarah Sharp.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
>> + * MA 02110-1301 USA
>> + */
>> +
>> +/**
>> + * This file gives the xhci stack for usb3.0 looking into
>> + * xhci specification Rev1.0 (5/21/10).
>> + * The quirk devices support hasn't been given yet.
>> + */
>> +
>
> Needs new SPDX license.

Sure

>
> * SPDX-License-Identifier:      GPL-2.0+
>
>
>
>> +#include <common.h>
>> +#include <asm/byteorder.h>
>> +#include <usb.h>
>> +#include <asm/io.h>
>
> Move this to xhci.h

Ok will move it.

>
>> +#include <malloc.h>
>> +#include <watchdog.h>
>> +#include <asm/cache.h>
>> +#include <asm/unaligned.h>
>> +#include <asm-generic/errno.h>
>> +#include "xhci.h"
>> +
>> +#ifndef CONFIG_USB_MAX_CONTROLLER_COUNT
>> +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
>> +#endif
>> +
>> +static struct descriptor {
>> +     struct usb_hub_descriptor hub;
>> +     struct usb_device_descriptor device;
>> +     struct usb_config_descriptor config;
>> +     struct usb_interface_descriptor interface;
>> +     struct usb_endpoint_descriptor endpoint;
>> +     struct usb_ss_ep_comp_descriptor ep_companion;
>> +} __attribute__ ((packed)) descriptor = {
>> +     {
>> +             0xc,            /* bDescLength */
>> +             0x2a,           /* bDescriptorType: hub descriptor */
>> +             2,              /* bNrPorts -- runtime modified */
>> +             cpu_to_le16(0x8), /* wHubCharacteristics */
>> +             10,             /* bPwrOn2PwrGood */
>> +             0,              /* bHubCntrCurrent */
>> +             {},             /* Device removable */
>> +             {}              /* at most 7 ports! XXX */
>> +     },
>> +     {
>> +             0x12,           /* bLength */
>> +             1,              /* bDescriptorType: UDESC_DEVICE */
>> +             cpu_to_le16(0x0300), /* bcdUSB: v3.0 */
>> +             9,              /* bDeviceClass: UDCLASS_HUB */
>> +             0,              /* bDeviceSubClass: UDSUBCLASS_HUB */
>> +             3,              /* bDeviceProtocol: UDPROTO_SSHUBSTT */
>> +             9,              /* bMaxPacketSize: 512 bytes  2^9 */
>> +             0x0000,         /* idVendor */
>> +             0x0000,         /* idProduct */
>> +             cpu_to_le16(0x0100), /* bcdDevice */
>> +             1,              /* iManufacturer */
>> +             2,              /* iProduct */
>> +             0,              /* iSerialNumber */
>> +             1               /* bNumConfigurations: 1 */
>> +     },
>> +     {
>> +             0x9,
>> +             2,              /* bDescriptorType: UDESC_CONFIG */
>> +             cpu_to_le16(0x1f), /* includes SS endpoint descriptor */
>> +             1,              /* bNumInterface */
>> +             1,              /* bConfigurationValue */
>> +             0,              /* iConfiguration */
>> +             0x40,           /* bmAttributes: UC_SELF_POWER */
>> +             0               /* bMaxPower */
>> +     },
>> +     {
>> +             0x9,            /* bLength */
>> +             4,              /* bDescriptorType: UDESC_INTERFACE */
>> +             0,              /* bInterfaceNumber */
>> +             0,              /* bAlternateSetting */
>> +             1,              /* bNumEndpoints */
>> +             9,              /* bInterfaceClass: UICLASS_HUB */
>> +             0,              /* bInterfaceSubClass: UISUBCLASS_HUB */
>> +             0,              /* bInterfaceProtocol: UIPROTO_HSHUBSTT */
>> +             0               /* iInterface */
>> +     },
>> +     {
>> +             0x7,            /* bLength */
>> +             5,              /* bDescriptorType: UDESC_ENDPOINT */
>> +             0x81,           /* bEndpointAddress: IN endpoint 1 */
>> +             3,              /* bmAttributes: UE_INTERRUPT */
>> +             8,              /* wMaxPacketSize */
>> +             255             /* bInterval */
>> +     },
>> +     {
>> +             0x06,           /* ss_bLength */
>> +             0x30,           /* ss_bDescriptorType: SS EP Companion */
>> +             0x00,           /* ss_bMaxBurst: allows 1 TX between ACKs */
>> +             /* ss_bmAttributes: 1 packet per service interval */
>> +             0x00,
>> +             /* ss_wBytesPerInterval: 15 bits for max 15 ports */
>> +             cpu_to_le16(0x02),
>> +     },
>> +};
>> +
>> +static struct xhci_ctrl xhcic[CONFIG_USB_MAX_CONTROLLER_COUNT];
>> +
>> +/**
>> + * Waits for as per specified amount of time
>> + * for the "result" to match with "done"
>> + *
>> + * @param ptr        pointer to the register to be read
>> + * @param mask       mask for the value read
>> + * @param done       value to be campared with result
>> + * @param usec       time to wait till
>> + * @return 0 if handshake is success else < 0 on failure
>> + */
>> +static int handshake(uint32_t volatile *ptr, uint32_t mask,
>> +                                     uint32_t done, int usec)
>> +{
>> +     uint32_t result;
>> +
>> +     do {
>> +             result = xhci_readl(ptr);
>> +             if (result == ~(uint32_t)0)
>> +                     return -ENODEV;
>> +             result &= mask;
>> +             if (result == done)
>> +                     return 0;
>> +             usec--;
>> +             udelay(1);
>> +     } while (usec > 0);
>> +
>> +     return -ETIMEDOUT;
>> +}
>> +
>> +/**
>> + * Set the run bit and wait for the host to be running.
>> + *
>> + * @param hcor       pointer to host controller operation registers
>> + * @return status of the Handshake
>> + */
>> +static int xhci_start(struct xhci_hcor *hcor)
>> +{
>> +     u32 temp;
>> +     int ret;
>> +
>> +     printf("Starting the controller\n");
>> +     temp = xhci_readl(&hcor->or_usbcmd);
>> +     temp |= (CMD_RUN);
>> +     xhci_writel(&hcor->or_usbcmd, temp);
>> +
>> +     /*
>> +      * Wait for the HCHalted Status bit to be 0 to indicate the host is
>> +      * running.
>> +      */
>> +     ret = handshake(&hcor->or_usbsts, STS_HALT, 0, XHCI_MAX_HALT_USEC);
>> +     if (ret)
>> +             debug("Host took too long to start, "
>> +                             "waited %u microseconds.\n",
>> +                             XHCI_MAX_HALT_USEC);
>> +     return ret;
>> +}
>> +
>> +/**
>> + * Resets the XHCI Controller
>> + *
>> + * @param hcor       pointer to host controller operation registers
>> + * @return -1 if XHCI Controller is halted else status of handshake
>> + */
>> +int xhci_reset(struct xhci_hcor *hcor)
>> +{
>> +     u32 cmd;
>> +     u32 state;
>> +     int ret;
>> +
>> +     /* Halting the Host first */
>> +     debug("// Halt the HC\n");
>> +     state = xhci_readl(&hcor->or_usbsts) & STS_HALT;
>> +     if (!state) {
>> +             cmd = xhci_readl(&hcor->or_usbcmd);
>> +             cmd &= ~CMD_RUN;
>> +             xhci_writel(&hcor->or_usbcmd, cmd);
>> +     }
>> +
>> +     ret = handshake(&hcor->or_usbsts,
>> +                     STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
>> +     if (ret) {
>> +             printf("Host not halted after %u microseconds.\n",
>> +                             XHCI_MAX_HALT_USEC);
>> +             return -1;
>> +     }
>> +
>> +     debug("// Reset the HC\n");
>> +     cmd = xhci_readl(&hcor->or_usbcmd);
>> +     cmd |= CMD_RESET;
>> +     xhci_writel(&hcor->or_usbcmd, cmd);
>> +
>> +     ret = handshake(&hcor->or_usbcmd, CMD_RESET, 0, XHCI_MAX_RESET_USEC);
>> +     if (ret)
>> +             return ret;
>> +
>> +     /*
>> +      * xHCI cannot write to any doorbells or operational registers other
>> +      * than status until the "Controller Not Ready" flag is cleared.
>> +      */
>> +     return handshake(&hcor->or_usbsts, STS_CNR, 0, XHCI_MAX_RESET_USEC);
>> +}
>> +
>> +/**
>> + * Used for passing endpoint bitmasks between the core and HCDs.
>> + * Find the index for an endpoint given its descriptor.
>> + * Use the return value to right shift 1 for the bitmask.
>> + *
>> + * Index  = (epnum * 2) + direction - 1,
>> + * where direction = 0 for OUT, 1 for IN.
>> + * For control endpoints, the IN index is used (OUT index is unused), so
>> + * index = (epnum * 2) + direction - 1 = (epnum * 2) + 1 - 1 = (epnum * 2)
>> + *
>> + * @param desc       USB enpdoint Descriptor
>> + * @return index of the Endpoint
>> + */
>> +static unsigned int xhci_get_ep_index(struct usb_endpoint_descriptor *desc)
>> +{
>> +     unsigned int index;
>> +
>> +     if (usb_endpoint_xfer_control(desc)) {
>> +             index = (unsigned int)(usb_endpoint_num(desc) * 2);
>> +     } else {
>> +             index = (unsigned int)((usb_endpoint_num(desc) * 2) -
>> +                             (usb_endpoint_dir_in(desc) ? 0 : 1));
>> +     }
>
> No brackets around single line if statements

Oh, right, will fix this.

>
>> +
>> +     return index;
>> +}
>> +
>> +/**
>> + * Issue a configure endpoint command or evaluate context command
>> + * and wait for it to finish.
>> + *
>> + * @param udev       pointer to the Device Data Structure
>> + * @param ctx_change flag to indicate the Context has changed or NOT
>> + * @return 0 on success, -1 on failure
>> + */
>> +static int xhci_configure_endpoints(struct usb_device *udev, bool ctx_change)
>> +{
>> +     struct xhci_container_ctx *in_ctx;
>> +     struct xhci_virt_device *virt_dev;
>> +     struct xhci_ctrl *ctrl = udev->controller;
>> +     union xhci_trb *event;
>> +
>> +     virt_dev = ctrl->devs[udev->slot_id];
>> +     in_ctx = virt_dev->in_ctx;
>> +
>> +     xhci_flush_cache((uint32_t)in_ctx->bytes, in_ctx->size);
>> +     xhci_queue_command(ctrl, in_ctx->bytes, udev->slot_id, 0,
>> +                        ctx_change ? TRB_EVAL_CONTEXT : TRB_CONFIG_EP);
>> +     event = xhci_wait_for_event(ctrl, TRB_COMPLETION);
>> +     BUG_ON(TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags))
>> +             != udev->slot_id);
>> +
>> +     switch (GET_COMP_CODE(le32_to_cpu(event->event_cmd.status))) {
>> +     case COMP_SUCCESS:
>> +             debug("Successful %s command\n",
>> +                     ctx_change ? "Evaluate Context" : "Configure Endpoint");
>> +             break;
>> +     default:
>> +             printf("ERROR: %s command returned completion code %d.\n",
>> +                     ctx_change ? "Evaluate Context" : "Configure Endpoint",
>> +                     GET_COMP_CODE(le32_to_cpu(event->event_cmd.status)));
>> +             return -1;
>> +     }
>> +
>> +     xhci_acknowledge_event(ctrl);
>> +
>> +     return 0;
>> +}
>> +
>> +/**
>> + * Configure the endpoint, programming the device contexts.
>> + *
>> + * @param udev       pointer to the USB device structure
>> + * @return returns the status of the xhci_configure_endpoints
>> + */
>> +static int xhci_set_configuration(struct usb_device *udev)
>> +{
>> +     struct xhci_container_ctx *in_ctx;
>> +     struct xhci_container_ctx *out_ctx;
>> +     struct xhci_input_control_ctx *ctrl_ctx;
>> +     struct xhci_slot_ctx *slot_ctx;
>> +     struct xhci_ep_ctx *ep_ctx[MAX_EP_CTX_NUM];
>> +     int cur_ep;
>> +     int max_ep_flag = 0;
>> +     int ep_index;
>> +     unsigned int dir;
>> +     unsigned int ep_type;
>> +     struct xhci_ctrl *ctrl = udev->controller;
>> +     int num_of_ep;
>> +     int ep_flag = 0;
>> +     u64 trb_64 = 0;
>> +     int slot_id = udev->slot_id;
>> +     struct xhci_virt_device *virt_dev = ctrl->devs[slot_id];
>> +     struct usb_interface *ifdesc;
>> +
>> +     out_ctx = virt_dev->out_ctx;
>> +     in_ctx = virt_dev->in_ctx;
>> +
>> +     num_of_ep = udev->config.if_desc[0].no_of_ep;
>> +     ifdesc = &udev->config.if_desc[0];
>> +
>> +     ctrl_ctx = xhci_get_input_control_ctx(in_ctx);
>> +     /* Zero the input context control */
>> +     ctrl_ctx->add_flags = 0;
>> +     ctrl_ctx->drop_flags = 0;
>> +
>> +     /* EP_FLAG gives values 1 & 4 for EP1OUT and EP2IN */
>> +     for (cur_ep = 0; cur_ep < num_of_ep; cur_ep++) {
>> +             ep_flag = xhci_get_ep_index(&ifdesc->ep_desc[cur_ep]);
>> +             ctrl_ctx->add_flags |= cpu_to_le32(1 << (ep_flag + 1));
>> +             if (max_ep_flag < ep_flag)
>> +                     max_ep_flag = ep_flag;
>> +     }
>> +
>> +     xhci_inval_cache((uint32_t)out_ctx->bytes, out_ctx->size);
>> +
>> +     /* slot context */
>> +     xhci_slot_copy(ctrl, in_ctx, out_ctx);
>> +     slot_ctx = xhci_get_slot_ctx(ctrl, in_ctx);
>> +     slot_ctx->dev_info &= ~(LAST_CTX_MASK);
>> +     slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(max_ep_flag + 1) | 0);
>> +
>> +     xhci_endpoint_copy(ctrl, in_ctx, out_ctx, 0);
>> +
>> +     /* filling up ep contexts */
>> +     for (cur_ep = 0; cur_ep < num_of_ep; cur_ep++) {
>> +             struct usb_endpoint_descriptor *endpt_desc = NULL;
>> +
>> +             endpt_desc = &ifdesc->ep_desc[cur_ep];
>> +             trb_64 = 0;
>> +
>> +             ep_index = xhci_get_ep_index(endpt_desc);
>> +             ep_ctx[ep_index] = xhci_get_ep_ctx(ctrl, in_ctx, ep_index);
>> +
>> +             /* Allocate the ep rings */
>> +             virt_dev->eps[ep_index].ring = xhci_ring_alloc(1, true);
>> +             if (!virt_dev->eps[ep_index].ring)
>> +                     return -1;
>> +
>> +             /*NOTE: ep_desc[0] actually represents EP1 and so on */
>> +             dir = (((endpt_desc->bEndpointAddress) & (0x80)) >> 7);
>> +             ep_type = (((endpt_desc->bmAttributes) & (0x3)) | (dir << 2));
>> +             ep_ctx[ep_index]->ep_info2 =
>> +                     cpu_to_le32(ep_type << EP_TYPE_SHIFT);
>> +             ep_ctx[ep_index]->ep_info2 |=
>> +                     cpu_to_le32(MAX_PACKET
>> +                     (get_unaligned(&endpt_desc->wMaxPacketSize)));
>> +
>> +             ep_ctx[ep_index]->ep_info2 |=
>> +                     cpu_to_le32(((0 & MAX_BURST_MASK) << MAX_BURST_SHIFT) |
>> +                     ((3 & ERROR_COUNT_MASK) << ERROR_COUNT_SHIFT));
>> +
>> +             trb_64 = (uintptr_t)
>> +                             virt_dev->eps[ep_index].ring->enqueue;
>> +             ep_ctx[ep_index]->deq = cpu_to_le64(trb_64 |
>> +                             virt_dev->eps[ep_index].ring->cycle_state);
>> +     }
>> +
>> +     return xhci_configure_endpoints(udev, false);
>> +}
>> +
>> +/**
>> + * Issue an Address Device command (which will issue a SetAddress request to
>> + * the device).
>> + *
>> + * @param udev pointer to the Device Data Structure
>> + * @return 0 if successful else error code on failure
>> + */
>> +static int xhci_address_device(struct usb_device *udev)
>> +{
>> +     int ret = 0;
>> +     struct xhci_ctrl *ctrl = udev->controller;
>> +     struct xhci_slot_ctx *slot_ctx;
>> +     struct xhci_input_control_ctx *ctrl_ctx;
>> +     struct xhci_virt_device *virt_dev;
>> +     int slot_id = udev->slot_id;
>> +     union xhci_trb *event;
>> +
>> +     virt_dev = ctrl->devs[slot_id];
>> +
>> +     /*
>> +      * This is the first Set Address since device plug-in
>> +      * so setting up the slot context.
>> +      */
>> +     debug("Setting up addressable devices\n");
>> +     xhci_setup_addressable_virt_dev(udev);
>> +
>> +     ctrl_ctx = xhci_get_input_control_ctx(virt_dev->in_ctx);
>> +     ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
>> +     ctrl_ctx->drop_flags = 0;
>> +
>> +     xhci_queue_command(ctrl, (void *)ctrl_ctx, slot_id, 0, TRB_ADDR_DEV);
>> +     event = xhci_wait_for_event(ctrl, TRB_COMPLETION);
>> +     BUG_ON(TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags)) != slot_id);
>> +
>> +     switch (GET_COMP_CODE(le32_to_cpu(event->event_cmd.status))) {
>> +     case COMP_CTX_STATE:
>> +     case COMP_EBADSLT:
>> +             printf("Setup ERROR: address device command for slot %d.\n",
>> +                                                             slot_id);
>> +             ret = -EINVAL;
>> +             break;
>> +     case COMP_TX_ERR:
>> +             printf("Device not responding to set address.\n");
>> +             ret = -EPROTO;
>> +             break;
>> +     case COMP_DEV_ERR:
>> +             printf("ERROR: Incompatible device"
>> +                                     "for address device command.\n");
>> +             ret = -ENODEV;
>> +             break;
>> +     case COMP_SUCCESS:
>> +             debug("Successful Address Device command\n");
>> +             udev->status = 0;
>> +             break;
>> +     default:
>> +             printf("ERROR: unexpected command completion code 0x%x.\n",
>> +                     GET_COMP_CODE(le32_to_cpu(event->event_cmd.status)));
>> +             ret = -EINVAL;
>> +             break;
>> +     }
>> +
>> +     xhci_acknowledge_event(ctrl);
>> +
>> +     if (ret < 0)
>> +             /*
>> +              * TODO: Unsuccessful Address Device command shall leave the
>> +              * slot in default state. So, issue Disable Slot command now.
>> +              */
>> +             return ret;
>> +
>> +     xhci_inval_cache((uint32_t)virt_dev->out_ctx->bytes,
>> +                             virt_dev->out_ctx->size);
>> +     slot_ctx = xhci_get_slot_ctx(ctrl, virt_dev->out_ctx);
>> +
>> +     debug("xHC internal address is: %d\n",
>> +             le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK);
>> +
>> +     return 0;
>> +}
>> +
>> +/**
>> + * Issue Enable slot command to the controller to allocate
>> + * device slot and assign the slot id. It fails if the xHC
>> + * ran out of device slots, the Enable Slot command timed out,
>> + * or allocating memory failed.
>> + *
>> + * @param udev       pointer to the Device Data Structure
>> + * @return Returns 0 on succes else return -1 on failure
>> + */
>> +int usb_alloc_device(struct usb_device *udev)
>> +{
>> +     union xhci_trb *event;
>> +     struct xhci_ctrl *ctrl = udev->controller;
>> +
>> +     /*
>> +      * Root hub will be first device to be initailized.
>> +      * If this device is root-hub, don't do any xHC related
>> +      * stuff.
>> +      */
>> +     if (ctrl->rootdev == 0) {
>> +             udev->speed = USB_SPEED_SUPER;
>> +             return 0;
>> +     }
>> +
>> +     xhci_queue_command(ctrl, NULL, 0, 0, TRB_ENABLE_SLOT);
>> +     event = xhci_wait_for_event(ctrl, TRB_COMPLETION);
>> +     BUG_ON(GET_COMP_CODE(le32_to_cpu(event->event_cmd.status))
>> +             != COMP_SUCCESS);
>> +
>> +     udev->slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->event_cmd.flags));
>> +
>> +     xhci_acknowledge_event(ctrl);
>> +
>> +     if (xhci_alloc_virt_device(udev) < 0) {
>> +             /*
>> +              * TODO: Unsuccessful Address Device command shall leave
>> +              * the slot in default. So, issue Disable Slot command now.
>> +              */
>> +             printf("Could not allocate xHCI USB device data structures\n");
>> +             return -1;
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +/*
>> + * Full speed devices may have a max packet size greater than 8 bytes, but the
>> + * USB core doesn't know that until it reads the first 8 bytes of the
>> + * descriptor.  If the usb_device's max packet size changes after that point,
>> + * we need to issue an evaluate context command and wait on it.
>> + *
>> + * @param udev       pointer to the Device Data Structure
>> + * @return returns the status of the xhci_configure_endpoints
>> + */
>> +int xhci_check_maxpacket(struct usb_device *udev)
>> +{
>> +     struct xhci_ctrl *ctrl = udev->controller;
>> +     unsigned int slot_id = udev->slot_id;
>> +     int ep_index = 0;       /* control endpoint */
>> +     struct xhci_container_ctx *in_ctx;
>> +     struct xhci_container_ctx *out_ctx;
>> +     struct xhci_input_control_ctx *ctrl_ctx;
>> +     struct xhci_ep_ctx *ep_ctx;
>> +     int max_packet_size;
>> +     int hw_max_packet_size;
>> +     int ret = 0;
>> +     struct usb_interface *ifdesc;
>> +
>> +     ifdesc = &udev->config.if_desc[0];
>> +
>> +     out_ctx = ctrl->devs[slot_id]->out_ctx;
>> +     xhci_inval_cache((uint32_t)out_ctx->bytes, out_ctx->size);
>> +
>> +     ep_ctx = xhci_get_ep_ctx(ctrl, out_ctx, ep_index);
>> +     hw_max_packet_size = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2));
>> +     max_packet_size = usb_endpoint_maxp(&ifdesc->ep_desc[0]);
>> +     if (hw_max_packet_size != max_packet_size) {
>> +             debug("Max Packet Size for ep 0 changed.\n");
>> +             debug("Max packet size in usb_device = %d\n", max_packet_size);
>> +             debug("Max packet size in xHCI HW = %d\n", hw_max_packet_size);
>> +             debug("Issuing evaluate context command.\n");
>> +
>> +             /* Set up the modified control endpoint 0 */
>> +             xhci_endpoint_copy(ctrl, ctrl->devs[slot_id]->in_ctx,
>> +                             ctrl->devs[slot_id]->out_ctx, ep_index);
>> +             in_ctx = ctrl->devs[slot_id]->in_ctx;
>> +             ep_ctx = xhci_get_ep_ctx(ctrl, in_ctx, ep_index);
>> +             ep_ctx->ep_info2 &= cpu_to_le32(~MAX_PACKET_MASK);
>> +             ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet_size));
>> +
>> +             /*
>> +              * Set up the input context flags for the command
>> +              * FIXME: This won't work if a non-default control endpoint
>> +              * changes max packet sizes.
>> +              */
>> +             ctrl_ctx = xhci_get_input_control_ctx(in_ctx);
>> +             ctrl_ctx->add_flags = cpu_to_le32(EP0_FLAG);
>> +             ctrl_ctx->drop_flags = 0;
>> +
>> +             ret = xhci_configure_endpoints(udev, true);
>> +     }
>> +     return ret;
>> +}
>> +
>> +/**
>> + * Clears the Change bits of the Port Status Register
>> + *
>> + * @param wValue     request value
>> + * @param wIndex     request index
>> + * @param addr               address of posrt status register
>> + * @param port_status        state of port status register
>> + * @return none
>> + */
>> +static void xhci_clear_port_change_bit(u16 wValue,
>> +             u16 wIndex, volatile uint32_t *addr, u32 port_status)
>> +{
>> +     char *port_change_bit;
>> +     u32 status;
>> +
>> +     switch (wValue) {
>> +     case USB_PORT_FEAT_C_RESET:
>> +             status = PORT_RC;
>> +             port_change_bit = "reset";
>> +             break;
>> +     case USB_PORT_FEAT_C_CONNECTION:
>> +             status = PORT_CSC;
>> +             port_change_bit = "connect";
>> +             break;
>> +     case USB_PORT_FEAT_C_OVER_CURRENT:
>> +             status = PORT_OCC;
>> +             port_change_bit = "over-current";
>> +             break;
>> +     case USB_PORT_FEAT_C_ENABLE:
>> +             status = PORT_PEC;
>> +             port_change_bit = "enable/disable";
>> +             break;
>> +     case USB_PORT_FEAT_C_SUSPEND:
>> +             status = PORT_PLC;
>> +             port_change_bit = "suspend/resume";
>> +             break;
>> +     default:
>> +             /* Should never happen */
>> +             return;
>> +     }
>> +
>> +     /* Change bits are all write 1 to clear */
>> +     xhci_writel(addr, port_status | status);
>> +
>> +     port_status = xhci_readl(addr);
>> +     debug("clear port %s change, actual port %d status  = 0x%x\n",
>> +                     port_change_bit, wIndex, port_status);
>> +}
>> +
>> +/**
>> + * Save Read Only (RO) bits and save read/write bits where
>> + * writing a 0 clears the bit and writing a 1 sets the bit (RWS).
>> + * For all other types (RW1S, RW1CS, RW, and RZ), writing a '0' has no effect.
>> + *
>> + * @param state      state of the Port Status and Control Regsiter
>> + * @return a value that would result in the port being in the
>> + *      same state, if the value was written to the port
>> + *      status control register.
>> + */
>> +static u32 xhci_port_state_to_neutral(u32 state)
>> +{
>> +     /* Save read-only status and port state */
>> +     return (state & XHCI_PORT_RO) | (state & XHCI_PORT_RWS);
>> +}
>> +
>> +/**
>> + * Submits the Requests to the XHCI Host Controller
>> + *
>> + * @param udev pointer to the USB device structure
>> + * @param pipe contains the DIR_IN or OUT , devnum
>> + * @param buffer buffer to be read/written based on the request
>> + * @return returns 0 if successful else -1 on failure
>> + */
>> +static int xhci_submit_root(struct usb_device *udev, unsigned long pipe,
>> +                     void *buffer, struct devrequest *req)
>> +{
>> +     uint8_t tmpbuf[4];
>> +     u16 typeReq;
>> +     void *srcptr = NULL;
>> +     int len, srclen;
>> +     uint32_t reg;
>> +     volatile uint32_t *status_reg;
>> +     struct xhci_ctrl *ctrl = udev->controller;
>> +     struct xhci_hcor *hcor = ctrl->hcor;
>> +
>> +     if (((req->requesttype & USB_RT_PORT) &&
>> +          le16_to_cpu(req->index)) > CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS) {
>> +             printf("The request port(%d) is not configured\n",
>> +                     le16_to_cpu(req->index) - 1);
>> +             return -1;
>> +     }
>> +
>> +     status_reg = (volatile uint32_t *)
>> +                  (&hcor->PortRegs[le16_to_cpu(req->index) - 1].or_portsc);
>> +     srclen = 0;
>> +
>> +     typeReq = req->request | req->requesttype << 8;
>> +
>> +     switch (typeReq) {
>> +     case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
>> +             switch (le16_to_cpu(req->value) >> 8) {
>> +             case USB_DT_DEVICE:
>> +                     debug("USB_DT_DEVICE request\n");
>> +                     srcptr = &descriptor.device;
>> +                     srclen = 0x12;
>> +                     break;
>> +             case USB_DT_CONFIG:
>> +                     debug("USB_DT_CONFIG config\n");
>> +                     srcptr = &descriptor.config;
>> +                     srclen = 0x19;
>> +                     break;
>> +             case USB_DT_STRING:
>> +                     debug("USB_DT_STRING config\n");
>> +                     switch (le16_to_cpu(req->value) & 0xff) {
>> +                     case 0: /* Language */
>> +                             srcptr = "\4\3\11\4";
>> +                             srclen = 4;
>> +                             break;
>> +                     case 1: /* Vendor String  */
>> +                             srcptr = "\16\3u\0-\0b\0o\0o\0t\0";
>> +                             srclen = 14;
>> +                             break;
>> +                     case 2: /* Product Name */
>> +                             srcptr = "\52\3X\0H\0C\0I\0 "
>> +                                      "\0H\0o\0s\0t\0 "
>> +                                      "\0C\0o\0n\0t\0r\0o\0l\0l\0e\0r\0";
>> +                             srclen = 42;
>> +                             break;
>> +                     default:
>> +                             printf("unknown value DT_STRING %x\n",
>> +                                     le16_to_cpu(req->value));
>> +                             goto unknown;
>> +                     }
>> +                     break;
>> +             default:
>> +                     printf("unknown value %x\n", le16_to_cpu(req->value));
>> +                     goto unknown;
>> +             }
>> +             break;
>> +     case USB_REQ_GET_DESCRIPTOR | ((USB_DIR_IN | USB_RT_HUB) << 8):
>> +             switch (le16_to_cpu(req->value) >> 8) {
>> +             case USB_DT_HUB:
>> +                     debug("USB_DT_HUB config\n");
>> +                     srcptr = &descriptor.hub;
>> +                     srclen = 0x8;
>> +                     break;
>> +             default:
>> +                     printf("unknown value %x\n", le16_to_cpu(req->value));
>> +                     goto unknown;
>> +             }
>> +             break;
>> +     case USB_REQ_SET_ADDRESS | (USB_RECIP_DEVICE << 8):
>> +             debug("USB_REQ_SET_ADDRESS\n");
>> +             ctrl->rootdev = le16_to_cpu(req->value);
>> +             break;
>> +     case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
>> +             /* Do nothing */
>> +             break;
>> +     case USB_REQ_GET_STATUS | ((USB_DIR_IN | USB_RT_HUB) << 8):
>> +             tmpbuf[0] = 1;  /* USB_STATUS_SELFPOWERED */
>> +             tmpbuf[1] = 0;
>> +             srcptr = tmpbuf;
>> +             srclen = 2;
>> +             break;
>> +     case USB_REQ_GET_STATUS | ((USB_RT_PORT | USB_DIR_IN) << 8):
>> +             memset(tmpbuf, 0, 4);
>> +             reg = xhci_readl(status_reg);
>> +             if (reg & PORT_CONNECT) {
>> +                     tmpbuf[0] |= USB_PORT_STAT_CONNECTION;
>> +                     switch (reg & DEV_SPEED_MASK) {
>> +                     case XDEV_FS:
>> +                             debug("SPEED = FULLSPEED\n");
>> +                             break;
>> +                     case XDEV_LS:
>> +                             debug("SPEED = LOWSPEED\n");
>> +                             tmpbuf[1] |= USB_PORT_STAT_LOW_SPEED >> 8;
>> +                             break;
>> +                     case XDEV_HS:
>> +                             debug("SPEED = HIGHSPEED\n");
>> +                             tmpbuf[1] |= USB_PORT_STAT_HIGH_SPEED >> 8;
>> +                             break;
>> +                     case XDEV_SS:
>> +                             debug("SPEED = SUPERSPEED\n");
>> +                             tmpbuf[1] |= USB_PORT_STAT_SUPER_SPEED >> 8;
>> +                             break;
>> +                     }
>> +             }
>> +             if (reg & PORT_PE)
>> +                     tmpbuf[0] |= USB_PORT_STAT_ENABLE;
>> +             if ((reg & PORT_PLS_MASK) == XDEV_U3)
>> +                     tmpbuf[0] |= USB_PORT_STAT_SUSPEND;
>> +             if (reg & PORT_OC)
>> +                     tmpbuf[0] |= USB_PORT_STAT_OVERCURRENT;
>> +             if (reg & PORT_RESET)
>> +                     tmpbuf[0] |= USB_PORT_STAT_RESET;
>> +             if (reg & PORT_POWER)
>> +                     /*
>> +                      * XXX: This Port power bit (for USB 3.0 hub)
>> +                      * we are faking in USB 2.0 hub port status;
>> +                      * since there's a change in bit positions in
>> +                      * two:
>> +                      * USB 2.0 port status PP is at position[8]
>> +                      * USB 3.0 port status PP is at position[9]
>> +                      * So, we are still keeping it at position [8]
>> +                      */
>> +                     tmpbuf[1] |= USB_PORT_STAT_POWER >> 8;
>> +             if (reg & PORT_CSC)
>> +                     tmpbuf[2] |= USB_PORT_STAT_C_CONNECTION;
>> +             if (reg & PORT_PEC)
>> +                     tmpbuf[2] |= USB_PORT_STAT_C_ENABLE;
>> +             if (reg & PORT_OCC)
>> +                     tmpbuf[2] |= USB_PORT_STAT_C_OVERCURRENT;
>> +             if (reg & PORT_RC)
>> +                     tmpbuf[2] |= USB_PORT_STAT_C_RESET;
>> +
>> +             srcptr = tmpbuf;
>> +             srclen = 4;
>> +             break;
>> +     case USB_REQ_SET_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
>> +             reg = xhci_readl(status_reg);
>> +             reg = xhci_port_state_to_neutral(reg);
>> +             switch (le16_to_cpu(req->value)) {
>> +             case USB_PORT_FEAT_ENABLE:
>> +                     reg |= PORT_PE;
>> +                     xhci_writel(status_reg, reg);
>> +                     break;
>> +             case USB_PORT_FEAT_POWER:
>> +                     reg |= PORT_POWER;
>> +                     xhci_writel(status_reg, reg);
>> +                     break;
>> +             case USB_PORT_FEAT_RESET:
>> +                     reg |= PORT_RESET;
>> +                     xhci_writel(status_reg, reg);
>> +                     break;
>> +             default:
>> +                     printf("unknown feature %x\n", le16_to_cpu(req->value));
>> +                     goto unknown;
>> +             }
>> +             break;
>> +     case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
>> +             reg = xhci_readl(status_reg);
>> +             reg = xhci_port_state_to_neutral(reg);
>> +             switch (le16_to_cpu(req->value)) {
>> +             case USB_PORT_FEAT_ENABLE:
>> +                     reg &= ~PORT_PE;
>> +                     break;
>> +             case USB_PORT_FEAT_POWER:
>> +                     reg &= ~PORT_POWER;
>> +                     break;
>> +             case USB_PORT_FEAT_C_RESET:
>> +             case USB_PORT_FEAT_C_CONNECTION:
>> +             case USB_PORT_FEAT_C_OVER_CURRENT:
>> +             case USB_PORT_FEAT_C_ENABLE:
>> +                     xhci_clear_port_change_bit((le16_to_cpu(req->value)),
>> +                                                     le16_to_cpu(req->index),
>> +                                                     status_reg, reg);
>> +                     break;
>> +             default:
>> +                     printf("unknown feature %x\n", le16_to_cpu(req->value));
>> +                     goto unknown;
>> +             }
>> +             xhci_writel(status_reg, reg);
>> +             break;
>> +     default:
>> +             printf("Unknown request\n");
>> +             goto unknown;
>> +     }
>> +
>> +     debug("scrlen = %d\n req->length = %d\n",
>> +             srclen, le16_to_cpu(req->length));
>> +
>> +     len = min(srclen, le16_to_cpu(req->length));
>> +
>> +     if (srcptr != NULL && len > 0)
>> +             memcpy(buffer, srcptr, len);
>> +     else
>> +             debug("Len is 0\n");
>> +
>> +     udev->act_len = len;
>> +     udev->status = 0;
>> +
>> +     return 0;
>> +
>> +unknown:
>> +     udev->act_len = 0;
>> +     udev->status = USB_ST_STALLED;
>> +
>> +     return -1;
>> +}
>> +
>> +/**
>> + * Submits the INT request to XHCI Host cotroller
>> + *
>> + * @param udev       pointer to the USB device
>> + * @param pipe               contains the DIR_IN or OUT , devnum
>> + * @param buffer     buffer to be read/written based on the request
>> + * @param length     length of the buffer
>> + * @param interval   interval of the interrupt
>> + * @return 0
>> + */
>> +int
>> +submit_int_msg(struct usb_device *udev, unsigned long pipe, void *buffer,
>> +                                             int length, int interval)
>> +{
>> +     /*
>> +      * TODO: Not addressing any interrupt type transfer requests
>> +      * Add support for it later.
>> +      */
>> +     return -1;
>> +}
>> +
>> +/**
>> + * submit the BULK type of request to the USB Device
>> + *
>> + * @param udev       pointer to the USB device
>> + * @param pipe               contains the DIR_IN or OUT , devnum
>> + * @param buffer     buffer to be read/written based on the request
>> + * @param length     length of the buffer
>> + * @return returns 0 if successful else -1 on failure
>> + */
>> +int
>> +submit_bulk_msg(struct usb_device *udev, unsigned long pipe, void *buffer,
>> +                                                             int length)
>> +{
>> +     if (usb_pipetype(pipe) != PIPE_BULK) {
>> +             printf("non-bulk pipe (type=%lu)", usb_pipetype(pipe));
>> +             return -1;
>> +     }
>> +
>> +     return xhci_bulk_tx(udev, pipe, length, buffer);
>> +}
>> +
>> +/**
>> + * submit the control type of request to the Root hub/Device based on the devnum
>> + *
>> + * @param udev       pointer to the USB device
>> + * @param pipe               contains the DIR_IN or OUT , devnum
>> + * @param buffer     buffer to be read/written based on the request
>> + * @param length     length of the buffer
>> + * @param setup              Request type
>> + * @return returns 0 if successful else -1 on failure
>> + */
>> +int
>> +submit_control_msg(struct usb_device *udev, unsigned long pipe, void *buffer,
>> +                                     int length, struct devrequest *setup)
>> +{
>> +     struct xhci_ctrl *ctrl = udev->controller;
>> +     int ret = 0;
>> +
>> +     if (usb_pipetype(pipe) != PIPE_CONTROL) {
>> +             printf("non-control pipe (type=%lu)", usb_pipetype(pipe));
>> +             return -1;
>> +     }
>> +
>> +     if (usb_pipedevice(pipe) == ctrl->rootdev)
>> +             return xhci_submit_root(udev, pipe, buffer, setup);
>> +
>> +     if (setup->request == USB_REQ_SET_ADDRESS)
>> +             return xhci_address_device(udev);
>> +
>> +     if (setup->request == USB_REQ_SET_CONFIGURATION) {
>> +             ret = xhci_set_configuration(udev);
>> +             if (ret) {
>> +                     printf("Failed to configure xHC endpoint\n");
>
> Use puts when there is no args.  Also s/xHC/xHCI

Ok.

>
>> +                     return ret;
>> +             }
>> +     }
>> +
>> +     return xhci_ctrl_tx(udev, pipe, setup, length, buffer);
>> +}
>> +
>> +/**
>> + * Intialises the XHCI host controller
>> + * and allocates the necessary data structures
>> + *
>> + * @param index      index to the host controller data structure
>> + * @return pointer to the intialised controller
>> + */
>> +int usb_lowlevel_init(int index, void **controller)
>> +{
>> +     uint32_t val;
>> +     uint32_t val2;
>> +     uint32_t reg;
>> +     struct xhci_hccr *hccr;
>> +     struct xhci_hcor *hcor;
>> +     struct xhci_ctrl *ctrl;
>> +
>> +     if (xhci_hcd_init(index, &hccr, (struct xhci_hcor **)&hcor) != 0)
>> +             return -ENODEV;
>> +
>> +     if (xhci_reset(hcor) != 0)
>> +             return -ENODEV;
>> +
>> +     ctrl = &xhcic[index];
>> +
>> +     ctrl->hccr = hccr;
>> +     ctrl->hcor = hcor;
>> +
>> +     /*
>> +      * Program the Number of Device Slots Enabled field in the CONFIG
>> +      * register with the max value of slots the HC can handle.
>> +      */
>> +     val = (xhci_readl(&hccr->cr_hcsparams1) & HCS_SLOTS_MASK);
>> +     val2 = xhci_readl(&hcor->or_config);
>> +     val |= (val2 & ~HCS_SLOTS_MASK);
>> +     xhci_writel(&hcor->or_config, val);
>> +
>> +     /* initializing xhci data structures */
>> +     if (xhci_mem_init(ctrl, hccr, hcor) < 0)
>> +             return -ENOMEM;
>> +
>> +     reg = xhci_readl(&hccr->cr_hcsparams1);
>> +     descriptor.hub.bNbrPorts = ((reg & HCS_MAX_PORTS_MASK) >>
>> +                                             HCS_MAX_PORTS_SHIFT);
>> +     printf("Register %x NbrPorts %d\n", reg, descriptor.hub.bNbrPorts);
>
> Nitpick maybe make this debug.

This is what EHCI also prints for information. Will make it debug if you want.

>
>> +
>> +     /* Port Indicators */
>> +     reg = xhci_readl(&hccr->cr_hccparams);
>> +     if (HCS_INDICATOR(reg))
>> +             put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics)
>> +                             | 0x80, &descriptor.hub.wHubCharacteristics);
>> +
>> +     /* Port Power Control */
>> +     if (HCC_PPC(reg))
>> +             put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics)
>> +                             | 0x01, &descriptor.hub.wHubCharacteristics);
>> +
>> +     if (xhci_start(hcor)) {
>> +             xhci_reset(hcor);
>> +             return -ENODEV;
>> +     }
>> +
>> +     /* Zero'ing IRQ control register and IRQ pending register */
>> +     xhci_writel(&ctrl->ir_set->irq_control, 0x0);
>> +     xhci_writel(&ctrl->ir_set->irq_pending, 0x0);
>> +
>> +     reg = HC_VERSION(xhci_readl(&hccr->cr_capbase));
>> +     printf("USB XHCI %x.%02x\n", reg >> 8, reg & 0xff);
>> +
>> +     *controller = &xhcic[index];
>> +
>> +     return 0;
>> +}
>> +
>> +/**
>> + * Stops the XHCI host controller
>> + * and cleans up all the related data structures
>> + *
>> + * @param index      index to the host controller data structure
>> + * @return none
>> + */
>> +int usb_lowlevel_stop(int index)
>> +{
>> +     struct xhci_ctrl *ctrl = (xhcic + index);
>> +     u32 temp;
>> +
>> +     xhci_reset(ctrl->hcor);
>> +
>> +     debug("// Disabling event ring interrupts\n");
>> +     temp = xhci_readl(&ctrl->hcor->or_usbsts);
>> +     xhci_writel(&ctrl->hcor->or_usbsts, temp & ~STS_EINT);
>> +     temp = xhci_readl(&ctrl->ir_set->irq_pending);
>> +     xhci_writel(&ctrl->ir_set->irq_pending, ER_IRQ_DISABLE(temp));
>> +
>> +     xhci_hcd_stop(index);
>> +
>> +     xhci_cleanup(ctrl);
>> +
>> +     return 0;
>> +}
>> diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
>> new file mode 100644
>> index 0000000..467afe0
>> --- /dev/null
>> +++ b/drivers/usb/host/xhci.h
>> @@ -0,0 +1,1280 @@
>> +/*
>> + * USB HOST XHCI Controller
>> + *
>> + * Copyright (C) 2013 Samsung Electronics Co.Ltd
>> + *   Vivek Gautam <gautam.vivek@samsung.com>
>> + *   Vikas Sajjan <vikas.sajjan@samsung.com>
>> + *
>> + * Based on xHCI host controller driver in linux-kernel
>> + * by Sarah Sharp.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
>> + * MA 02110-1301 USA
>> + */
>> +
>
> Needs new SPDX license.
Sure

>
> * SPDX-License-Identifier:      GPL-2.0+
>
>
>> +#ifndef HOST_XHCI_H_
>> +#define HOST_XHCI_H_
>> +
>> +#include <asm/cache.h>
>> +#include <linux/list.h>
>> +
>> +/* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
>> +#define DeviceRequest \
>> +     ((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE) << 8)
>> +
>> +#define DeviceOutRequest \
>> +     ((USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE) << 8)
>> +
>> +#define InterfaceRequest \
>> +     ((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8)
>> +
>> +#define EndpointRequest \
>> +     ((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8)
>> +
>> +#define EndpointOutRequest \
>> +     ((USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8)
>> +
>> +#define upper_32_bits(n) (u32)(((n) >> 32))
>> +#define lower_32_bits(n) (u32)(n)
>> +
>> +#define MAX_EP_CTX_NUM               31
>> +#define XHCI_ALIGNMENT               64
>> +/* Generic timeout for XHCI events */
>> +#define XHCI_TIMEOUT         5000
>> +/* Max number of USB devices for any host controller - limit in section 6.1 */
>> +#define MAX_HC_SLOTS            256
>> +/* Section 5.3.3 - MaxPorts */
>> +#define MAX_HC_PORTS            127
>> +
>> +/* Up to 16 ms to halt an HC */
>> +#define XHCI_MAX_HALT_USEC   (16*1000)
>> +
>> +#define XHCI_MAX_RESET_USEC  (250*1000)
>> +
>> +/*
>> + * These bits are Read Only (RO) and should be saved and written to the
>> + * registers: 0, 3, 10:13, 30
>> + * connect status, over-current status, port speed, and device removable.
>> + * connect status and port speed are also sticky - meaning they're in
>> + * the AUX well and they aren't changed by a hot, warm, or cold reset.
>> + */
>> +#define XHCI_PORT_RO ((1 << 0) | (1 << 3) | (0xf << 10) | (1 << 30))
>> +/*
>> + * These bits are RW; writing a 0 clears the bit, writing a 1 sets the bit:
>> + * bits 5:8, 9, 14:15, 25:27
>> + * link state, port power, port indicator state, "wake on" enable state
>> + */
>> +#define XHCI_PORT_RWS ((0xf << 5) | (1 << 9) | (0x3 << 14) | (0x7 << 25))
>> +/*
>> + * These bits are RW; writing a 1 sets the bit, writing a 0 has no effect:
>> + * bit 4 (port reset)
>> + */
>> +#define XHCI_PORT_RW1S ((1 << 4))
>> +/*
>> + * These bits are RW; writing a 1 clears the bit, writing a 0 has no effect:
>> + * bits 1, 17, 18, 19, 20, 21, 22, 23
>> + * port enable/disable, and
>> + * change bits: connect, PED,
>> + * warm port reset changed (reserved zero for USB 2.0 ports),
>> + * over-current, reset, link state, and L1 change
>> + */
>> +#define XHCI_PORT_RW1CS ((1 << 1) | (0x7f << 17))
>> +/*
>> + * Bit 16 is RW, and writing a '1' to it causes the link state control to be
>> + * latched in
>> + */
>> +#define XHCI_PORT_RW ((1 << 16))
>> +/*
>> + * These bits are Reserved Zero (RsvdZ) and zero should be written to them:
>> + * bits 2, 24, 28:31
>> + */
>> +#define XHCI_PORT_RZ ((1 << 2) | (1 << 24) | (0xf << 28))
>> +
>> +/*
>> + * XHCI Register Space.
>> + */
>> +struct xhci_hccr {
>> +     uint32_t cr_capbase;
>> +     uint32_t cr_hcsparams1;
>> +     uint32_t cr_hcsparams2;
>> +     uint32_t cr_hcsparams3;
>> +     uint32_t cr_hccparams;
>> +     uint32_t cr_dboff;
>> +     uint32_t cr_rtsoff;
>> +
>> +/* hc_capbase bitmasks */
>> +/* bits 7:0 - how long is the Capabilities register */
>> +#define HC_LENGTH(p)         XHCI_HC_LENGTH(p)
>> +/* bits 31:16        */
>> +#define HC_VERSION(p)                (((p) >> 16) & 0xffff)
>> +
>> +/* HCSPARAMS1 - hcs_params1 - bitmasks */
>> +/* bits 0:7, Max Device Slots */
>> +#define HCS_MAX_SLOTS(p)     (((p) >> 0) & 0xff)
>> +#define HCS_SLOTS_MASK               0xff
>> +/* bits 8:18, Max Interrupters */
>> +#define HCS_MAX_INTRS(p)     (((p) >> 8) & 0x7ff)
>> +/* bits 24:31, Max Ports - max value is 0x7F = 127 ports */
>> +#define HCS_MAX_PORTS_SHIFT  24
>> +#define HCS_MAX_PORTS_MASK   (0x7f << HCS_MAX_PORTS_SHIFT)
>> +#define HCS_MAX_PORTS(p)     (((p) >> 24) & 0x7f)
>> +
>> +/* HCSPARAMS2 - hcs_params2 - bitmasks */
>> +/* bits 0:3, frames or uframes that SW needs to queue transactions
>> + * ahead of the HW to meet periodic deadlines */
>> +#define HCS_IST(p)           (((p) >> 0) & 0xf)
>> +/* bits 4:7, max number of Event Ring segments */
>> +#define HCS_ERST_MAX(p)              (((p) >> 4) & 0xf)
>> +/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
>> +/* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */
>> +#define HCS_MAX_SCRATCHPAD(p)   (((p) >> 27) & 0x1f)
>> +
>> +/* HCSPARAMS3 - hcs_params3 - bitmasks */
>> +/* bits 0:7, Max U1 to U0 latency for the roothub ports */
>> +#define HCS_U1_LATENCY(p)    (((p) >> 0) & 0xff)
>> +/* bits 16:31, Max U2 to U0 latency for the roothub ports */
>> +#define HCS_U2_LATENCY(p)    (((p) >> 16) & 0xffff)
>> +
>> +/* HCCPARAMS - hcc_params - bitmasks */
>> +/* true: HC can use 64-bit address pointers */
>> +#define HCC_64BIT_ADDR(p)    ((p) & (1 << 0))
>> +/* true: HC can do bandwidth negotiation */
>> +#define HCC_BANDWIDTH_NEG(p) ((p) & (1 << 1))
>> +/* true: HC uses 64-byte Device Context structures
>> + * FIXME 64-byte context structures aren't supported yet.
>> + */
>> +#define HCC_64BYTE_CONTEXT(p)        ((p) & (1 << 2))
>> +/* true: HC has port power switches */
>> +#define HCC_PPC(p)           ((p) & (1 << 3))
>> +/* true: HC has port indicators */
>> +#define HCS_INDICATOR(p)     ((p) & (1 << 4))
>> +/* true: HC has Light HC Reset Capability */
>> +#define HCC_LIGHT_RESET(p)   ((p) & (1 << 5))
>> +/* true: HC supports latency tolerance messaging */
>> +#define HCC_LTC(p)           ((p) & (1 << 6))
>> +/* true: no secondary Stream ID Support */
>> +#define HCC_NSS(p)           ((p) & (1 << 7))
>> +/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */
>> +#define HCC_MAX_PSA(p)               (1 << ((((p) >> 12) & 0xf) + 1))
>> +/* Extended Capabilities pointer from PCI base - section 5.3.6 */
>> +#define HCC_EXT_CAPS(p)              XHCI_HCC_EXT_CAPS(p)
>> +
>> +/* db_off bitmask - bits 0:1 reserved */
>> +#define      DBOFF_MASK      (~0x3)
>> +
>> +/* run_regs_off bitmask - bits 0:4 reserved */
>> +#define      RTSOFF_MASK     (~0x1f)
>> +
>> +};
>> +
>> +struct xhci_hcor_portRegss {
>> +     volatile uint32_t or_portsc;
>> +     volatile uint32_t or_portpmsc;
>> +     volatile uint32_t or_portli;
>> +     volatile uint32_t reserved_3;
>> +};
>> +
>> +struct xhci_hcor {
>> +     volatile uint32_t or_usbcmd;
>> +     volatile uint32_t or_usbsts;
>> +     volatile uint32_t or_pagesize;
>> +     volatile uint32_t reserved_0[2];
>> +     volatile uint32_t or_dnctrl;
>> +     volatile uint64_t or_crcr;
>> +     volatile uint32_t reserved_1[4];
>> +     volatile uint64_t or_dcbaap;
>> +     volatile uint32_t or_config;
>> +     volatile uint32_t reserved_2[241];
>> +     struct xhci_hcor_portRegss PortRegs[CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS];
>> +
>> +     uint32_t reserved_4[CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS * 254];
>> +};
>> +
>> +/* USBCMD - USB command - command bitmasks */
>> +/* start/stop HC execution - do not write unless HC is halted*/
>> +#define CMD_RUN              XHCI_CMD_RUN
>> +/* Reset HC - resets internal HC state machine and all registers (except
>> + * PCI config regs).  HC does NOT drive a USB reset on the downstream ports.
>> + * The xHCI driver must reinitialize the xHC after setting this bit.
>> + */
>> +#define CMD_RESET    (1 << 1)
>> +/* Event Interrupt Enable - a '1' allows interrupts from the host controller */
>> +#define CMD_EIE              XHCI_CMD_EIE
>> +/* Host System Error Interrupt Enable - get out-of-band signal for HC errors */
>> +#define CMD_HSEIE    XHCI_CMD_HSEIE
>> +/* bits 4:6 are reserved (and should be preserved on writes). */
>> +/* light reset (port status stays unchanged) - reset completed when this is 0 */
>> +#define CMD_LRESET   (1 << 7)
>> +/* host controller save/restore state. */
>> +#define CMD_CSS              (1 << 8)
>> +#define CMD_CRS              (1 << 9)
>> +/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
>> +#define CMD_EWE              XHCI_CMD_EWE
>> +/* MFINDEX power management - '1' means xHC can stop MFINDEX counter if all root
>> + * hubs are in U3 (selective suspend), disconnect, disabled, or powered-off.
>> + * '0' means the xHC can power it off if all ports are in the disconnect,
>> + * disabled, or powered-off state.
>> + */
>> +#define CMD_PM_INDEX (1 << 11)
>> +/* bits 12:31 are reserved (and should be preserved on writes). */
>> +
>> +/* USBSTS - USB status - status bitmasks */
>> +/* HC not running - set to 1 when run/stop bit is cleared. */
>> +#define STS_HALT     XHCI_STS_HALT
>> +/* serious error, e.g. PCI parity error.  The HC will clear the run/stop bit. */
>> +#define STS_FATAL    (1 << 2)
>> +/* event interrupt - clear this prior to clearing any IP flags in IR set*/
>> +#define STS_EINT     (1 << 3)
>> +/* port change detect */
>> +#define STS_PORT     (1 << 4)
>> +/* bits 5:7 reserved and zeroed */
>> +/* save state status - '1' means xHC is saving state */
>> +#define STS_SAVE     (1 << 8)
>> +/* restore state status - '1' means xHC is restoring state */
>> +#define STS_RESTORE  (1 << 9)
>> +/* true: save or restore error */
>> +#define STS_SRE              (1 << 10)
>> +/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
>> +#define STS_CNR              XHCI_STS_CNR
>> +/* true: internal Host Controller Error - SW needs to reset and reinitialize */
>> +#define STS_HCE              (1 << 12)
>> +/* bits 13:31 reserved and should be preserved */
>> +
>> +/*
>> + * DNCTRL - Device Notification Control Register - dev_notification bitmasks
>> + * Generate a device notification event when the HC sees a transaction with a
>> + * notification type that matches a bit set in this bit field.
>> + */
>> +#define      DEV_NOTE_MASK           (0xffff)
>> +#define ENABLE_DEV_NOTE(x)   (1 << (x))
>> +/* Most of the device notification types should only be used for debug.
>> + * SW does need to pay attention to function wake notifications.
>> + */
>> +#define      DEV_NOTE_FWAKE          ENABLE_DEV_NOTE(1)
>> +
>> +/* CRCR - Command Ring Control Register - cmd_ring bitmasks */
>> +/* bit 0 is the command ring cycle state */
>> +/* stop ring operation after completion of the currently executing command */
>> +#define CMD_RING_PAUSE               (1 << 1)
>> +/* stop ring immediately - abort the currently executing command */
>> +#define CMD_RING_ABORT               (1 << 2)
>> +/* true: command ring is running */
>> +#define CMD_RING_RUNNING     (1 << 3)
>> +/* bits 4:5 reserved and should be preserved */
>> +/* Command Ring pointer - bit mask for the lower 32 bits. */
>> +#define CMD_RING_RSVD_BITS   (0x3f)
>> +
>> +/* CONFIG - Configure Register - config_reg bitmasks */
>> +/* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */
>> +#define MAX_DEVS(p)  ((p) & 0xff)
>> +/* bits 8:31 - reserved and should be preserved */
>> +
>> +/* PORTSC - Port Status and Control Register - port_status_base bitmasks */
>> +/* true: device connected */
>> +#define PORT_CONNECT (1 << 0)
>> +/* true: port enabled */
>> +#define PORT_PE              (1 << 1)
>> +/* bit 2 reserved and zeroed */
>> +/* true: port has an over-current condition */
>> +#define PORT_OC              (1 << 3)
>> +/* true: port reset signaling asserted */
>> +#define PORT_RESET   (1 << 4)
>> +/* Port Link State - bits 5:8
>> + * A read gives the current link PM state of the port,
>> + * a write with Link State Write Strobe set sets the link state.
>> + */
>> +#define PORT_PLS_MASK        (0xf << 5)
>> +#define XDEV_U0              (0x0 << 5)
>> +#define XDEV_U2              (0x2 << 5)
>> +#define XDEV_U3              (0x3 << 5)
>> +#define XDEV_RESUME  (0xf << 5)
>> +/* true: port has power (see HCC_PPC) */
>> +#define PORT_POWER   (1 << 9)
>> +/* bits 10:13 indicate device speed:
>> + * 0 - undefined speed - port hasn't be initialized by a reset yet
>> + * 1 - full speed
>> + * 2 - low speed
>> + * 3 - high speed
>> + * 4 - super speed
>> + * 5-15 reserved
>> + */
>> +#define DEV_SPEED_MASK               (0xf << 10)
>> +#define      XDEV_FS                 (0x1 << 10)
>> +#define      XDEV_LS                 (0x2 << 10)
>> +#define      XDEV_HS                 (0x3 << 10)
>> +#define      XDEV_SS                 (0x4 << 10)
>> +#define DEV_UNDEFSPEED(p)    (((p) & DEV_SPEED_MASK) == (0x0<<10))
>> +#define DEV_FULLSPEED(p)     (((p) & DEV_SPEED_MASK) == XDEV_FS)
>> +#define DEV_LOWSPEED(p)              (((p) & DEV_SPEED_MASK) == XDEV_LS)
>> +#define DEV_HIGHSPEED(p)     (((p) & DEV_SPEED_MASK) == XDEV_HS)
>> +#define DEV_SUPERSPEED(p)    (((p) & DEV_SPEED_MASK) == XDEV_SS)
>> +/* Bits 20:23 in the Slot Context are the speed for the device */
>> +#define      SLOT_SPEED_FS           (XDEV_FS << 10)
>> +#define      SLOT_SPEED_LS           (XDEV_LS << 10)
>> +#define      SLOT_SPEED_HS           (XDEV_HS << 10)
>> +#define      SLOT_SPEED_SS           (XDEV_SS << 10)
>> +/* Port Indicator Control */
>> +#define PORT_LED_OFF (0 << 14)
>> +#define PORT_LED_AMBER       (1 << 14)
>> +#define PORT_LED_GREEN       (2 << 14)
>> +#define PORT_LED_MASK        (3 << 14)
>> +/* Port Link State Write Strobe - set this when changing link state */
>> +#define PORT_LINK_STROBE     (1 << 16)
>> +/* true: connect status change */
>> +#define PORT_CSC     (1 << 17)
>> +/* true: port enable change */
>> +#define PORT_PEC     (1 << 18)
>> +/* true: warm reset for a USB 3.0 device is done.  A "hot" reset puts the port
>> + * into an enabled state, and the device into the default state.  A "warm" reset
>> + * also resets the link, forcing the device through the link training sequence.
>> + * SW can also look at the Port Reset register to see when warm reset is done.
>> + */
>> +#define PORT_WRC     (1 << 19)
>> +/* true: over-current change */
>> +#define PORT_OCC     (1 << 20)
>> +/* true: reset change - 1 to 0 transition of PORT_RESET */
>> +#define PORT_RC              (1 << 21)
>> +/* port link status change - set on some port link state transitions:
>> + *  Transition                               Reason
>> + *  --------------------------------------------------------------------------
>> + *  - U3 to Resume           Wakeup signaling from a device
>> + *  - Resume to Recovery to U0       USB 3.0 device resume
>> + *  - Resume to U0           USB 2.0 device resume
>> + *  - U3 to Recovery to U0   Software resume of USB 3.0 device complete
>> + *  - U3 to U0                       Software resume of USB 2.0 device complete
>> + *  - U2 to U0                       L1 resume of USB 2.1 device complete
>> + *  - U0 to U0 (???)         L1 entry rejection by USB 2.1 device
>> + *  - U0 to disabled         L1 entry error with USB 2.1 device
>> + *  - Any state to inactive  Error on USB 3.0 port
>> + */
>> +#define PORT_PLC     (1 << 22)
>> +/* port configure error change - port failed to configure its link partner */
>> +#define PORT_CEC     (1 << 23)
>> +/* bit 24 reserved */
>> +/* wake on connect (enable) */
>> +#define PORT_WKCONN_E        (1 << 25)
>> +/* wake on disconnect (enable) */
>> +#define PORT_WKDISC_E        (1 << 26)
>> +/* wake on over-current (enable) */
>> +#define PORT_WKOC_E  (1 << 27)
>> +/* bits 28:29 reserved */
>> +/* true: device is removable - for USB 3.0 roothub emulation */
>> +#define PORT_DEV_REMOVE      (1 << 30)
>> +/* Initiate a warm port reset - complete when PORT_WRC is '1' */
>> +#define PORT_WR              (1 << 31)
>> +
>> +/* We mark duplicate entries with -1 */
>> +#define DUPLICATE_ENTRY ((u8)(-1))
>> +
>> +/* Port Power Management Status and Control - port_power_base bitmasks */
>> +/* Inactivity timer value for transitions into U1, in microseconds.
>> + * Timeout can be up to 127us.  0xFF means an infinite timeout.
>> + */
>> +#define PORT_U1_TIMEOUT(p)   ((p) & 0xff)
>> +/* Inactivity timer value for transitions into U2 */
>> +#define PORT_U2_TIMEOUT(p)   (((p) & 0xff) << 8)
>> +/* Bits 24:31 for port testing */
>> +
>> +/* USB2 Protocol PORTSPMSC */
>> +#define      PORT_L1S_MASK           7
>> +#define      PORT_L1S_SUCCESS        1
>> +#define      PORT_RWE                (1 << 3)
>> +#define      PORT_HIRD(p)            (((p) & 0xf) << 4)
>> +#define      PORT_HIRD_MASK          (0xf << 4)
>> +#define      PORT_L1DS(p)            (((p) & 0xff) << 8)
>> +#define      PORT_HLE                (1 << 16)
>> +
>> +/**
>> +* struct xhci_intr_reg - Interrupt Register Set
>> +* @irq_pending:      IMAN - Interrupt Management Register.  Used to enable
>> +*                    interrupts and check for pending interrupts.
>> +* @irq_control:      IMOD - Interrupt Moderation Register.
>> +*                    Used to throttle interrupts.
>> +* @erst_size:                Number of segments in the
>> +                     Event Ring Segment Table (ERST).
>> +* @erst_base:                ERST base address.
>> +* @erst_dequeue:     Event ring dequeue pointer.
>> +*
>> +* Each interrupter (defined by a MSI-X vector) has an event ring and an Event
>> +* Ring Segment Table (ERST) associated with it.
>> +* The event ring is comprised of  multiple segments of the same size.
>> +* The HC places events on the ring and  "updates the Cycle bit in the TRBs to
>> +* indicate to software the current  position of the Enqueue Pointer."
>> +* The HCD (Linux) processes those events and  updates the dequeue pointer.
>> +*/
>> +struct xhci_intr_reg {
>> +     volatile __le32 irq_pending;
>> +     volatile __le32 irq_control;
>> +     volatile __le32 erst_size;
>> +     volatile __le32 rsvd;
>> +     volatile __le64 erst_base;
>> +     volatile __le64 erst_dequeue;
>> +};
>> +
>> +/* irq_pending bitmasks */
>> +#define      ER_IRQ_PENDING(p)       ((p) & 0x1)
>> +/* bits 2:31 need to be preserved */
>> +/* THIS IS BUGGY - FIXME - IP IS WRITE 1 TO CLEAR */
>> +#define      ER_IRQ_CLEAR(p)         ((p) & 0xfffffffe)
>> +#define      ER_IRQ_ENABLE(p)        ((ER_IRQ_CLEAR(p)) | 0x2)
>> +#define      ER_IRQ_DISABLE(p)       ((ER_IRQ_CLEAR(p)) & ~(0x2))
>> +
>> +/* irq_control bitmasks */
>> +/* Minimum interval between interrupts (in 250ns intervals).  The interval
>> + * between interrupts will be longer if there are no events on the event ring.
>> + * Default is 4000 (1 ms).
>> + */
>> +#define ER_IRQ_INTERVAL_MASK (0xffff)
>> +/* Counter used to count down the time to the next interrupt - HW use only */
>> +#define ER_IRQ_COUNTER_MASK  (0xffff << 16)
>> +
>> +/* erst_size bitmasks */
>> +/* Preserve bits 16:31 of erst_size */
>> +#define      ERST_SIZE_MASK          (0xffff << 16)
>> +
>> +/* erst_dequeue bitmasks */
>> +/* Dequeue ERST Segment Index (DESI) - Segment number (or alias)
>> + * where the current dequeue pointer lies.  This is an optional HW hint.
>> + */
>> +#define ERST_DESI_MASK               (0x7)
>> +/* Event Handler Busy (EHB) - is the event ring scheduled to be serviced by
>> + * a work queue (or delayed service routine)?
>> + */
>> +#define ERST_EHB             (1 << 3)
>> +#define ERST_PTR_MASK                (0xf)
>> +
>> +/**
>> + * struct xhci_run_regs
>> + * @microframe_index:        MFINDEX - current microframe number
>> + *
>> + * Section 5.5 Host Controller Runtime Registers:
>> + * "Software should read and write these registers using only Dword (32 bit)
>> + * or larger accesses"
>> + */
>> +struct xhci_run_regs {
>> +     __le32                  microframe_index;
>> +     __le32                  rsvd[7];
>> +     struct xhci_intr_reg    ir_set[128];
>> +};
>> +
>> +/**
>> + * struct doorbell_array
>> + *
>> + * Bits  0 -  7: Endpoint target
>> + * Bits  8 - 15: RsvdZ
>> + * Bits 16 - 31: Stream ID
>> + *
>> + * Section 5.6
>> + */
>> +struct xhci_doorbell_array {
>> +     volatile __le32 doorbell[256];
>> +};
>> +
>> +#define DB_VALUE(ep, stream) ((((ep) + 1) & 0xff) | ((stream) << 16))
>> +#define DB_VALUE_HOST                0x00000000
>> +
>> +/**
>> + * struct xhci_protocol_caps
>> + * @revision:                major revision, minor revision, capability ID,
>> + *                   and next capability pointer.
>> + * @name_string:     Four ASCII characters to say which spec this xHC
>> + *                   follows, typically "USB ".
>> + * @port_info:               Port offset, count, and protocol-defined information.
>> + */
>> +struct xhci_protocol_caps {
>> +     u32     revision;
>> +     u32     name_string;
>> +     u32     port_info;
>> +};
>> +
>> +#define      XHCI_EXT_PORT_MAJOR(x)  (((x) >> 24) & 0xff)
>> +#define      XHCI_EXT_PORT_OFF(x)    ((x) & 0xff)
>> +#define      XHCI_EXT_PORT_COUNT(x)  (((x) >> 8) & 0xff)
>> +
>> +/**
>> + * struct xhci_container_ctx
>> + * @type: Type of context.  Used to calculated offsets to contained contexts.
>> + * @size: Size of the context data
>> + * @bytes: The raw context data given to HW
>> + * @dma: dma address of the bytes
>> + *
>> + * Represents either a Device or Input context.  Holds a pointer to the raw
>> + * memory used for the context (bytes) and dma address of it (dma).
>> + */
>> +struct xhci_container_ctx {
>> +     unsigned type;
>> +#define XHCI_CTX_TYPE_DEVICE  0x1
>> +#define XHCI_CTX_TYPE_INPUT   0x2
>> +
>> +     int size;
>> +     u8 *bytes;
>> +};
>> +
>> +/**
>> + * struct xhci_slot_ctx
>> + * @dev_info:        Route string, device speed, hub info, and last valid endpoint
>> + * @dev_info2:       Max exit latency for device number, root hub port number
>> + * @tt_info: tt_info is used to construct split transaction tokens
>> + * @dev_state:       slot state and device address
>> + *
>> + * Slot Context - section 6.2.1.1.  This assumes the HC uses 32-byte context
>> + * structures.  If the HC uses 64-byte contexts, there is an additional 32 bytes
>> + * reserved at the end of the slot context for HC internal use.
>> + */
>> +struct xhci_slot_ctx {
>> +     __le32  dev_info;
>> +     __le32  dev_info2;
>> +     __le32  tt_info;
>> +     __le32  dev_state;
>> +     /* offset 0x10 to 0x1f reserved for HC internal use */
>> +     __le32  reserved[4];
>> +};
>> +
>> +/* dev_info bitmasks */
>> +/* Route String - 0:19 */
>> +#define ROUTE_STRING_MASK    (0xfffff)
>> +/* Device speed - values defined by PORTSC Device Speed field - 20:23 */
>> +#define DEV_SPEED            (0xf << 20)
>> +/* bit 24 reserved */
>> +/* Is this LS/FS device connected through a HS hub? - bit 25 */
>> +#define DEV_MTT                      (0x1 << 25)
>> +/* Set if the device is a hub - bit 26 */
>> +#define DEV_HUB                      (0x1 << 26)
>> +/* Index of the last valid endpoint context in this device context - 27:31 */
>> +#define LAST_CTX_MASK                (0x1f << 27)
>> +#define LAST_CTX(p)          ((p) << 27)
>> +#define LAST_CTX_TO_EP_NUM(p)        (((p) >> 27) - 1)
>> +#define SLOT_FLAG            (1 << 0)
>> +#define EP0_FLAG             (1 << 1)
>> +
>> +/* dev_info2 bitmasks */
>> +/* Max Exit Latency (ms) - worst case time to wake up all links in dev path */
>> +#define MAX_EXIT                     (0xffff)
>> +/* Root hub port number that is needed to access the USB device */
>> +#define ROOT_HUB_PORT(p)             (((p) & 0xff) << 16)
>> +#define ROOT_HUB_PORT_MASK           (0xff)
>> +#define ROOT_HUB_PORT_SHIFT          (16)
>> +#define DEVINFO_TO_ROOT_HUB_PORT(p)  (((p) >> 16) & 0xff)
>> +/* Maximum number of ports under a hub device */
>> +#define XHCI_MAX_PORTS(p)            (((p) & 0xff) << 24)
>> +
>> +/* tt_info bitmasks */
>> +/*
>> + * TT Hub Slot ID - for low or full speed devices attached to a high-speed hub
>> + * The Slot ID of the hub that isolates the high speed signaling from
>> + * this low or full-speed device.  '0' if attached to root hub port.
>> + */
>> +#define TT_SLOT                      (0xff)
>> +/*
>> + * The number of the downstream facing port of the high-speed hub
>> + * '0' if the device is not low or full speed.
>> + */
>> +#define TT_PORT                      (0xff << 8)
>> +#define TT_THINK_TIME(p)     (((p) & 0x3) << 16)
>> +
>> +/* dev_state bitmasks */
>> +/* USB device address - assigned by the HC */
>> +#define DEV_ADDR_MASK        (0xff)
>> +/* bits 8:26 reserved */
>> +/* Slot state */
>> +#define SLOT_STATE           (0x1f << 27)
>> +#define GET_SLOT_STATE(p)    (((p) & (0x1f << 27)) >> 27)
>> +
>> +#define SLOT_STATE_DISABLED  0
>> +#define SLOT_STATE_ENABLED   SLOT_STATE_DISABLED
>> +#define SLOT_STATE_DEFAULT   1
>> +#define SLOT_STATE_ADDRESSED 2
>> +#define SLOT_STATE_CONFIGURED        3
>> +
>> +/**
>> + * struct xhci_ep_ctx
>> + * @ep_info: endpoint state, streams, mult, and interval information.
>> + * @ep_info2:        information on endpoint type, max packet size, max burst size,
>> + *           error count, and whether the HC will force an event for all
>> + *           transactions.
>> + * @deq:     64-bit ring dequeue pointer address.  If the endpoint only
>> + *           defines one stream, this points to the endpoint transfer ring.
>> + *           Otherwise, it points to a stream context array, which has a
>> + *           ring pointer for each flow.
>> + * @tx_info:
>> + *           Average TRB lengths for the endpoint ring and
>> + *           max payload within an Endpoint Service Interval Time (ESIT).
>> + *
>> + * Endpoint Context - section 6.2.1.2.This assumes the HC uses 32-byte context
>> + * structures.If the HC uses 64-byte contexts, there is an additional 32 bytes
>> + * reserved at the end of the endpoint context for HC internal use.
>> + */
>> +struct xhci_ep_ctx {
>> +     __le32  ep_info;
>> +     __le32  ep_info2;
>> +     __le64  deq;
>> +     __le32  tx_info;
>> +     /* offset 0x14 - 0x1f reserved for HC internal use */
>> +     __le32  reserved[3];
>> +};
>> +
>> +/* ep_info bitmasks */
>> +/*
>> + * Endpoint State - bits 0:2
>> + * 0 - disabled
>> + * 1 - running
>> + * 2 - halted due to halt condition - ok to manipulate endpoint ring
>> + * 3 - stopped
>> + * 4 - TRB error
>> + * 5-7 - reserved
>> + */
>> +#define EP_STATE_MASK                (0xf)
>> +#define EP_STATE_DISABLED    0
>> +#define EP_STATE_RUNNING     1
>> +#define EP_STATE_HALTED              2
>> +#define EP_STATE_STOPPED     3
>> +#define EP_STATE_ERROR               4
>> +/* Mult - Max number of burtst within an interval, in EP companion desc. */
>> +#define EP_MULT(p)           (((p) & 0x3) << 8)
>> +#define CTX_TO_EP_MULT(p)    (((p) >> 8) & 0x3)
>> +/* bits 10:14 are Max Primary Streams */
>> +/* bit 15 is Linear Stream Array */
>> +/* Interval - period between requests to an endpoint - 125u increments. */
>> +#define EP_INTERVAL(p)                       (((p) & 0xff) << 16)
>> +#define EP_INTERVAL_TO_UFRAMES(p)    (1 << (((p) >> 16) & 0xff))
>> +#define CTX_TO_EP_INTERVAL(p)                (((p) >> 16) & 0xff)
>> +#define EP_MAXPSTREAMS_MASK          (0x1f << 10)
>> +#define EP_MAXPSTREAMS(p)            (((p) << 10) & EP_MAXPSTREAMS_MASK)
>> +/* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */
>> +#define      EP_HAS_LSA                      (1 << 15)
>> +
>> +/* ep_info2 bitmasks */
>> +/*
>> + * Force Event - generate transfer events for all TRBs for this endpoint
>> + * This will tell the HC to ignore the IOC and ISP flags (for debugging only).
>> + */
>> +#define      FORCE_EVENT             (0x1)
>> +#define ERROR_COUNT(p)               (((p) & 0x3) << 1)
>> +#define ERROR_COUNT_SHIFT    (1)
>> +#define ERROR_COUNT_MASK     (0x3)
>> +#define CTX_TO_EP_TYPE(p)    (((p) >> 3) & 0x7)
>> +#define EP_TYPE(p)           ((p) << 3)
>> +#define EP_TYPE_SHIFT                (3)
>> +#define ISOC_OUT_EP          1
>> +#define BULK_OUT_EP          2
>> +#define INT_OUT_EP           3
>> +#define CTRL_EP                      4
>> +#define ISOC_IN_EP           5
>> +#define BULK_IN_EP           6
>> +#define INT_IN_EP            7
>> +/* bit 6 reserved */
>> +/* bit 7 is Host Initiate Disable - for disabling stream selection */
>> +#define MAX_BURST(p)         (((p)&0xff) << 8)
>> +#define MAX_BURST_MASK               (0xff)
>> +#define MAX_BURST_SHIFT              (8)
>> +#define CTX_TO_MAX_BURST(p)  (((p) >> 8) & 0xff)
>> +#define MAX_PACKET(p)                (((p)&0xffff) << 16)
>> +#define MAX_PACKET_MASK              (0xffff)
>> +#define MAX_PACKET_DECODED(p)        (((p) >> 16) & 0xffff)
>> +#define MAX_PACKET_SHIFT     (16)
>> +
>> +/* Get max packet size from ep desc. Bit 10..0 specify the max packet size.
>> + * USB2.0 spec 9.6.6.
>> + */
>> +#define GET_MAX_PACKET(p)    ((p) & 0x7ff)
>> +
>> +/* tx_info bitmasks */
>> +#define AVG_TRB_LENGTH_FOR_EP(p)     ((p) & 0xffff)
>> +#define MAX_ESIT_PAYLOAD_FOR_EP(p)   (((p) & 0xffff) << 16)
>> +#define CTX_TO_MAX_ESIT_PAYLOAD(p)   (((p) >> 16) & 0xffff)
>> +
>> +/* deq bitmasks */
>> +#define EP_CTX_CYCLE_MASK            (1 << 0)
>> +
>> +
>> +/**
>> + * struct xhci_input_control_context
>> + * Input control context; see section 6.2.5.
>> + *
>> + * @drop_context:    set the bit of the endpoint context you want to disable
>> + * @add_context:     set the bit of the endpoint context you want to enable
>> + */
>> +struct xhci_input_control_ctx {
>> +     volatile __le32 drop_flags;
>> +     volatile __le32 add_flags;
>> +     __le32  rsvd2[6];
>> +};
>> +
>> +
>> +/**
>> + * struct xhci_device_context_array
>> + * @dev_context_ptr  array of 64-bit DMA addresses for device contexts
>> + */
>> +struct xhci_device_context_array {
>> +     /* 64-bit device addresses; we only write 32-bit addresses */
>> +     __le64                  dev_context_ptrs[MAX_HC_SLOTS];
>> +};
>> +/* TODO: write function to set the 64-bit device DMA address */
>> +/*
>> + * TODO: change this to be dynamically sized at HC mem init time since the HC
>> + * might not be able to handle the maximum number of devices possible.
>> + */
>> +
>> +
>> +struct xhci_transfer_event {
>> +     /* 64-bit buffer address, or immediate data */
>> +     __le64  buffer;
>> +     __le32  transfer_len;
>> +     /* This field is interpreted differently based on the type of TRB */
>> +     volatile __le32 flags;
>> +};
>> +
>> +/* Transfer event TRB length bit mask */
>> +/* bits 0:23 */
>> +#define EVENT_TRB_LEN(p)     ((p) & 0xffffff)
>> +
>> +/** Transfer Event bit fields **/
>> +#define      TRB_TO_EP_ID(p)         (((p) >> 16) & 0x1f)
>> +
>> +/* Completion Code - only applicable for some types of TRBs */
>> +#define      COMP_CODE_MASK          (0xff << 24)
>> +#define      COMP_CODE_SHIFT         (24)
>> +#define GET_COMP_CODE(p)     (((p) & COMP_CODE_MASK) >> 24)
>> +
>> +typedef enum {
>> +     COMP_SUCCESS = 1,
>> +     /* Data Buffer Error */
>> +     COMP_DB_ERR, /* 2 */
>> +     /* Babble Detected Error */
>> +     COMP_BABBLE, /* 3 */
>> +     /* USB Transaction Error */
>> +     COMP_TX_ERR, /* 4 */
>> +     /* TRB Error - some TRB field is invalid */
>> +     COMP_TRB_ERR, /* 5 */
>> +     /* Stall Error - USB device is stalled */
>> +     COMP_STALL, /* 6 */
>> +     /* Resource Error - HC doesn't have memory for that device configuration */
>> +     COMP_ENOMEM, /* 7 */
>> +     /* Bandwidth Error - not enough room in schedule for this dev config */
>> +     COMP_BW_ERR, /* 8 */
>> +     /* No Slots Available Error - HC ran out of device slots */
>> +     COMP_ENOSLOTS, /* 9 */
>> +     /* Invalid Stream Type Error */
>> +     COMP_STREAM_ERR, /* 10 */
>> +     /* Slot Not Enabled Error - doorbell rung for disabled device slot */
>> +     COMP_EBADSLT, /* 11 */
>> +     /* Endpoint Not Enabled Error */
>> +     COMP_EBADEP,/* 12 */
>> +     /* Short Packet */
>> +     COMP_SHORT_TX, /* 13 */
>> +     /* Ring Underrun - doorbell rung for an empty isoc OUT ep ring */
>> +     COMP_UNDERRUN, /* 14 */
>> +     /* Ring Overrun - isoc IN ep ring is empty when ep is scheduled to RX */
>> +     COMP_OVERRUN, /* 15 */
>> +     /* Virtual Function Event Ring Full Error */
>> +     COMP_VF_FULL, /* 16 */
>> +     /* Parameter Error - Context parameter is invalid */
>> +     COMP_EINVAL, /* 17 */
>> +     /* Bandwidth Overrun Error - isoc ep exceeded its allocated bandwidth */
>> +     COMP_BW_OVER,/* 18 */
>> +     /* Context State Error - illegal context state transition requested */
>> +     COMP_CTX_STATE,/* 19 */
>> +     /* No Ping Response Error - HC didn't get PING_RESPONSE in time to TX */
>> +     COMP_PING_ERR,/* 20 */
>> +     /* Event Ring is full */
>> +     COMP_ER_FULL,/* 21 */
>> +     /* Incompatible Device Error */
>> +     COMP_DEV_ERR,/* 22 */
>> +     /* Missed Service Error - HC couldn't service an isoc ep within interval */
>> +     COMP_MISSED_INT,/* 23 */
>> +     /* Successfully stopped command ring */
>> +     COMP_CMD_STOP, /* 24 */
>> +     /* Successfully aborted current command and stopped command ring */
>> +     COMP_CMD_ABORT, /* 25 */
>> +     /* Stopped - transfer was terminated by a stop endpoint command */
>> +     COMP_STOP,/* 26 */
>> +     /* Same as COMP_EP_STOPPED, but the transferred length in the event
>> +      * is invalid */
>> +     COMP_STOP_INVAL, /* 27*/
>> +     /* Control Abort Error - Debug Capability - control pipe aborted */
>> +     COMP_DBG_ABORT, /* 28 */
>> +     /* Max Exit Latency Too Large Error */
>> +     COMP_MEL_ERR,/* 29 */
>> +     /* TRB type 30 reserved */
>> +     /* Isoc Buffer Overrun - an isoc IN ep sent more data than could fit in TD */
>> +     COMP_BUFF_OVER = 31,
>> +     /* Event Lost Error - xHC has an "internal event overrun condition" */
>> +     COMP_ISSUES, /* 32 */
>> +     /* Undefined Error - reported when other error codes don't apply */
>> +     COMP_UNKNOWN, /* 33 */
>> +     /* Invalid Stream ID Error */
>> +     COMP_STRID_ERR, /* 34 */
>> +     /* Secondary Bandwidth Error - may be returned by a Configure Endpoint cmd */
>> +     COMP_2ND_BW_ERR, /* 35 */
>> +     /* Split Transaction Error */
>> +     COMP_SPLIT_ERR /* 36 */
>> +
>> +} xhci_comp_code;
>> +
>> +struct xhci_link_trb {
>> +     /* 64-bit segment pointer*/
>> +     volatile __le64 segment_ptr;
>> +     volatile __le32 intr_target;
>> +     volatile __le32 control;
>> +};
>> +
>> +/* control bitfields */
>> +#define LINK_TOGGLE (0x1 << 1)
>> +
>> +/* Command completion event TRB */
>> +struct xhci_event_cmd {
>> +     /* Pointer to command TRB, or the value passed by the event data trb */
>> +     volatile __le64 cmd_trb;
>> +     volatile __le32 status;
>> +     volatile __le32 flags;
>> +};
>> +
>> +/* flags bitmasks */
>> +/* bits 16:23 are the virtual function ID */
>> +/* bits 24:31 are the slot ID */
>> +#define      TRB_TO_SLOT_ID(p)               (((p) & (0xff << 24)) >> 24)
>> +#define      TRB_TO_SLOT_ID_SHIFT            (24)
>> +#define      TRB_TO_SLOT_ID_MASK             (0xff << TRB_TO_SLOT_ID_SHIFT)
>> +#define      SLOT_ID_FOR_TRB(p)              (((p) & 0xff) << 24)
>> +#define      SLOT_ID_FOR_TRB_MASK            (0xff)
>> +#define      SLOT_ID_FOR_TRB_SHIFT           (24)
>> +
>> +/* Stop Endpoint TRB - ep_index to endpoint ID for this TRB */
>> +#define TRB_TO_EP_INDEX(p)           ((((p) & (0x1f << 16)) >> 16) - 1)
>> +#define      EP_ID_FOR_TRB(p)                ((((p) + 1) & 0x1f) << 16)
>> +
>> +#define SUSPEND_PORT_FOR_TRB(p)              (((p) & 1) << 23)
>> +#define TRB_TO_SUSPEND_PORT(p)               (((p) & (1 << 23)) >> 23)
>> +#define LAST_EP_INDEX                        30
>> +
>> +/* Set TR Dequeue Pointer command TRB fields */
>> +#define TRB_TO_STREAM_ID(p)          ((((p) & (0xffff << 16)) >> 16))
>> +#define STREAM_ID_FOR_TRB(p)         ((((p)) & 0xffff) << 16)
>> +
>> +
>> +/* Port Status Change Event TRB fields */
>> +/* Port ID - bits 31:24 */
>> +#define GET_PORT_ID(p)                       (((p) & (0xff << 24)) >> 24)
>> +#define      PORT_ID_SHIFT                   (24)
>> +#define      PORT_ID_MASK                    (0xff << PORT_ID_SHIFT)
>> +
>> +/* Normal TRB fields */
>> +/* transfer_len bitmasks - bits 0:16 */
>> +#define      TRB_LEN(p)                      ((p) & 0x1ffff)
>> +#define      TRB_LEN_MASK                    (0x1ffff)
>> +/* Interrupter Target - which MSI-X vector to target the completion event at */
>> +#define      TRB_INTR_TARGET_SHIFT           (22)
>> +#define      TRB_INTR_TARGET_MASK            (0x3ff)
>> +#define TRB_INTR_TARGET(p)           (((p) & 0x3ff) << 22)
>> +#define GET_INTR_TARGET(p)           (((p) >> 22) & 0x3ff)
>> +#define TRB_TBC(p)                   (((p) & 0x3) << 7)
>> +#define TRB_TLBPC(p)                 (((p) & 0xf) << 16)
>> +
>> +/* Cycle bit - indicates TRB ownership by HC or HCD */
>> +#define TRB_CYCLE            (1<<0)
>> +/*
>> + * Force next event data TRB to be evaluated before task switch.
>> + * Used to pass OS data back after a TD completes.
>> + */
>> +#define TRB_ENT                      (1<<1)
>> +/* Interrupt on short packet */
>> +#define TRB_ISP                      (1<<2)
>> +/* Set PCIe no snoop attribute */
>> +#define TRB_NO_SNOOP         (1<<3)
>> +/* Chain multiple TRBs into a TD */
>> +#define TRB_CHAIN            (1<<4)
>> +/* Interrupt on completion */
>> +#define TRB_IOC                      (1<<5)
>> +/* The buffer pointer contains immediate data */
>> +#define TRB_IDT                      (1<<6)
>> +
>> +/* Block Event Interrupt */
>> +#define      TRB_BEI                 (1<<9)
>> +
>> +/* Control transfer TRB specific fields */
>> +#define TRB_DIR_IN           (1<<16)
>> +#define      TRB_TX_TYPE(p)          ((p) << 16)
>> +#define      TRB_TX_TYPE_SHIFT       (16)
>> +#define      TRB_DATA_OUT            2
>> +#define      TRB_DATA_IN             3
>> +
>> +/* Isochronous TRB specific fields */
>> +#define TRB_SIA                      (1 << 31)
>> +
>> +struct xhci_generic_trb {
>> +     volatile __le32 field[4];
>> +};
>> +
>> +union xhci_trb {
>> +     struct xhci_link_trb            link;
>> +     struct xhci_transfer_event      trans_event;
>> +     struct xhci_event_cmd           event_cmd;
>> +     struct xhci_generic_trb         generic;
>> +};
>> +
>> +/* TRB bit mask */
>> +#define      TRB_TYPE_BITMASK        (0xfc00)
>> +#define TRB_TYPE(p)          ((p) << 10)
>> +#define TRB_TYPE_SHIFT               (10)
>> +#define TRB_FIELD_TO_TYPE(p) (((p) & TRB_TYPE_BITMASK) >> 10)
>> +
>> +/* TRB type IDs */
>> +typedef enum {
>> +     /* bulk, interrupt, isoc scatter/gather, and control data stage */
>> +     TRB_NORMAL = 1,
>> +     /* setup stage for control transfers */
>> +     TRB_SETUP, /* 2 */
>> +     /* data stage for control transfers */
>> +     TRB_DATA, /* 3 */
>> +     /* status stage for control transfers */
>> +     TRB_STATUS, /* 4 */
>> +     /* isoc transfers */
>> +     TRB_ISOC, /* 5 */
>> +     /* TRB for linking ring segments */
>> +     TRB_LINK, /* 6 */
>> +     /* TRB for EVENT DATA */
>> +     TRB_EVENT_DATA, /* 7 */
>> +     /* Transfer Ring No-op (not for the command ring) */
>> +     TRB_TR_NOOP, /* 8 */
>> +     /* Command TRBs */
>> +     /* Enable Slot Command */
>> +     TRB_ENABLE_SLOT, /* 9 */
>> +     /* Disable Slot Command */
>> +     TRB_DISABLE_SLOT, /* 10 */
>> +     /* Address Device Command */
>> +     TRB_ADDR_DEV, /* 11 */
>> +     /* Configure Endpoint Command */
>> +     TRB_CONFIG_EP, /* 12 */
>> +     /* Evaluate Context Command */
>> +     TRB_EVAL_CONTEXT, /* 13 */
>> +     /* Reset Endpoint Command */
>> +     TRB_RESET_EP, /* 14 */
>> +     /* Stop Transfer Ring Command */
>> +     TRB_STOP_RING, /* 15 */
>> +     /* Set Transfer Ring Dequeue Pointer Command */
>> +     TRB_SET_DEQ, /* 16 */
>> +     /* Reset Device Command */
>> +     TRB_RESET_DEV, /* 17 */
>> +     /* Force Event Command (opt) */
>> +     TRB_FORCE_EVENT, /* 18 */
>> +     /* Negotiate Bandwidth Command (opt) */
>> +     TRB_NEG_BANDWIDTH, /* 19 */
>> +     /* Set Latency Tolerance Value Command (opt) */
>> +     TRB_SET_LT, /* 20 */
>> +     /* Get port bandwidth Command */
>> +     TRB_GET_BW, /* 21 */
>> +     /* Force Header Command - generate a transaction or link management packet */
>> +     TRB_FORCE_HEADER, /* 22 */
>> +     /* No-op Command - not for transfer rings */
>> +     TRB_CMD_NOOP, /* 23 */
>> +     /* TRB IDs 24-31 reserved */
>> +     /* Event TRBS */
>> +     /* Transfer Event */
>> +     TRB_TRANSFER = 32,
>> +     /* Command Completion Event */
>> +     TRB_COMPLETION, /* 33 */
>> +     /* Port Status Change Event */
>> +     TRB_PORT_STATUS, /* 34 */
>> +     /* Bandwidth Request Event (opt) */
>> +     TRB_BANDWIDTH_EVENT, /* 35 */
>> +     /* Doorbell Event (opt) */
>> +     TRB_DOORBELL, /* 36 */
>> +     /* Host Controller Event */
>> +     TRB_HC_EVENT, /* 37 */
>> +     /* Device Notification Event - device sent function wake notification */
>> +     TRB_DEV_NOTE, /* 38 */
>> +     /* MFINDEX Wrap Event - microframe counter wrapped */
>> +     TRB_MFINDEX_WRAP, /* 39 */
>> +     /* TRB IDs 40-47 reserved, 48-63 is vendor-defined */
>> +     /* Nec vendor-specific command completion event. */
>> +     TRB_NEC_CMD_COMP = 48, /* 48 */
>> +     /* Get NEC firmware revision. */
>> +     TRB_NEC_GET_FW, /* 49 */
>> +} trb_type;
>> +
>> +#define TRB_TYPE_LINK(x)     (((x) & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK))
>> +/* Above, but for __le32 types -- can avoid work by swapping constants: */
>> +#define TRB_TYPE_LINK_LE32(x)        (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
>> +                              cpu_to_le32(TRB_TYPE(TRB_LINK)))
>> +#define TRB_TYPE_NOOP_LE32(x)        (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
>> +                              cpu_to_le32(TRB_TYPE(TRB_TR_NOOP)))
>> +
>> +/*
>> + * TRBS_PER_SEGMENT must be a multiple of 4,
>> + * since the command ring is 64-byte aligned.
>> + * It must also be greater than 16.
>> + */
>> +#define TRBS_PER_SEGMENT     64
>> +/* Allow two commands + a link TRB, along with any reserved command TRBs */
>> +#define MAX_RSVD_CMD_TRBS    (TRBS_PER_SEGMENT - 3)
>> +#define SEGMENT_SIZE         (TRBS_PER_SEGMENT*16)
>> +/* SEGMENT_SHIFT should be log2(SEGMENT_SIZE).
>> + * Change this if you change TRBS_PER_SEGMENT!
>> + */
>> +#define SEGMENT_SHIFT                10
>> +/* TRB buffer pointers can't cross 64KB boundaries */
>> +#define TRB_MAX_BUFF_SHIFT   16
>> +#define TRB_MAX_BUFF_SIZE    (1 << TRB_MAX_BUFF_SHIFT)
>> +
>> +struct xhci_segment {
>> +     union xhci_trb          *trbs;
>> +     /* private to HCD */
>> +     struct xhci_segment     *next;
>> +};
>> +
>> +struct xhci_ring {
>> +     struct xhci_segment     *first_seg;
>> +     union  xhci_trb         *enqueue;
>> +     struct xhci_segment     *enq_seg;
>> +     union  xhci_trb         *dequeue;
>> +     struct xhci_segment     *deq_seg;
>> +     /*
>> +      * Write the cycle state into the TRB cycle field to give ownership of
>> +      * the TRB to the host controller (if we are the producer), or to check
>> +      * if we own the TRB (if we are the consumer).  See section 4.9.1.
>> +      */
>> +     volatile u32            cycle_state;
>> +     unsigned int            num_segs;
>> +};
>> +
>> +struct xhci_erst_entry {
>> +     /* 64-bit event ring segment address */
>> +     __le64  seg_addr;
>> +     __le32  seg_size;
>> +     /* Set to zero */
>> +     __le32  rsvd;
>> +};
>> +
>> +struct xhci_erst {
>> +     struct xhci_erst_entry  *entries;
>> +     unsigned int            num_entries;
>> +     /* Num entries the ERST can contain */
>> +     unsigned int            erst_size;
>> +};
>> +
>> +/*
>> + * Each segment table entry is 4*32bits long.  1K seems like an ok size:
>> + * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
>> + * meaning 64 ring segments.
>> + * Initial allocated size of the ERST, in number of entries */
>> +#define      ERST_NUM_SEGS   3
>> +/* Initial number of event segment rings allocated */
>> +#define      ERST_ENTRIES    3
>> +/* Initial allocated size of the ERST, in number of entries */
>> +#define      ERST_SIZE       64
>> +/* Poll every 60 seconds */
>> +#define      POLL_TIMEOUT    60
>> +/* Stop endpoint command timeout (secs) for URB cancellation watchdog timer */
>> +#define XHCI_STOP_EP_CMD_TIMEOUT     5
>> +/* XXX: Make these module parameters */
>> +
>> +struct xhci_virt_ep {
>> +     struct xhci_ring                *ring;
>> +     unsigned int                    ep_state;
>> +#define SET_DEQ_PENDING              (1 << 0)
>> +#define EP_HALTED            (1 << 1)        /* For stall handling */
>> +#define EP_HALT_PENDING              (1 << 2)        /* For URB cancellation */
>> +/* Transitioning the endpoint to using streams, don't enqueue URBs */
>> +#define EP_GETTING_STREAMS   (1 << 3)
>> +#define EP_HAS_STREAMS               (1 << 4)
>> +/* Transitioning the endpoint to not using streams, don't enqueue URBs */
>> +#define EP_GETTING_NO_STREAMS        (1 << 5)
>> +};
>> +
>> +#define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
>> +
>> +struct xhci_virt_device {
>> +     struct usb_device               *udev;
>> +     /*
>> +      * Commands to the hardware are passed an "input context" that
>> +      * tells the hardware what to change in its data structures.
>> +      * The hardware will return changes in an "output context" that
>> +      * software must allocate for the hardware.  We need to keep
>> +      * track of input and output contexts separately because
>> +      * these commands might fail and we don't trust the hardware.
>> +      */
>> +     struct xhci_container_ctx       *out_ctx;
>> +     /* Used for addressing devices and configuration changes */
>> +     struct xhci_container_ctx       *in_ctx;
>> +     /* Rings saved to ensure old alt settings can be re-instated */
>> +#define      XHCI_MAX_RINGS_CACHED   31
>> +     struct xhci_virt_ep             eps[31];
>> +};
>> +
>> +/* TODO: copied from ehci.h - can be refactored? */
>> +/* xHCI spec says all registers are little endian */
>> +static inline unsigned int xhci_readl(uint32_t volatile *regs)
>> +{
>> +     return readl(regs);
>> +}
>> +
>> +static inline void xhci_writel(uint32_t volatile *regs, const unsigned int val)
>> +{
>> +     writel(val, regs);
>> +}
>> +
>> +/*
>> + * Registers should always be accessed with double word or quad word accesses.
>> + * Some xHCI implementations may support 64-bit address pointers.  Registers
>> + * with 64-bit address pointers should be written to with dword accesses by
>> + * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
>> + * xHCI implementations that do not support 64-bit address pointers will ignore
>> + * the high dword, and write order is irrelevant.
>> + */
>> +static inline u64 xhci_readq(__le64 volatile *regs)
>> +{
>> +     __u32 *ptr = (__u32 *)regs;
>> +     u64 val_lo = readl(ptr);
>> +     u64 val_hi = readl(ptr + 1);
>> +     return val_lo + (val_hi << 32);
>> +}
>> +
>> +static inline void xhci_writeq(__le64 volatile *regs, const u64 val)
>> +{
>> +     __u32 *ptr = (__u32 *)regs;
>> +     u32 val_lo = lower_32_bits(val);
>> +     /* FIXME */
>> +     u32 val_hi = 0;
>> +     writel(val_lo, ptr);
>> +     writel(val_hi, ptr + 1);
>> +}
>> +
>> +int xhci_hcd_init(int index, struct xhci_hccr **ret_hccr,
>> +                                     struct xhci_hcor **ret_hcor);
>> +void xhci_hcd_stop(int index);
>> +
>> +
>> +/*************************************************************
>> +     EXTENDED CAPABILITY DEFINITIONS
>> +*************************************************************/
>> +/* Up to 16 ms to halt an HC */
>> +#define XHCI_MAX_HALT_USEC   (16*1000)
>> +/* HC not running - set to 1 when run/stop bit is cleared. */
>> +#define XHCI_STS_HALT                (1 << 0)
>> +
>> +/* HCCPARAMS offset from PCI base address */
>> +#define XHCI_HCC_PARAMS_OFFSET       0x10
>> +/* HCCPARAMS contains the first extended capability pointer */
>> +#define XHCI_HCC_EXT_CAPS(p) (((p)>>16)&0xffff)
>> +
>> +/* Command and Status registers offset from the Operational Registers address */
>> +#define XHCI_CMD_OFFSET              0x00
>> +#define XHCI_STS_OFFSET              0x04
>> +
>> +#define XHCI_MAX_EXT_CAPS            50
>> +
>> +/* Capability Register */
>> +/* bits 7:0 - how long is the Capabilities register */
>> +#define XHCI_HC_LENGTH(p)    (((p) >> 00) & 0x00ff)
>> +
>> +/* Extended capability register fields */
>> +#define XHCI_EXT_CAPS_ID(p)  (((p) >> 0) & 0xff)
>> +#define XHCI_EXT_CAPS_NEXT(p)        (((p) >> 8) & 0xff)
>> +#define      XHCI_EXT_CAPS_VAL(p)    ((p) >> 16)
>> +/* Extended capability IDs - ID 0 reserved */
>> +#define XHCI_EXT_CAPS_LEGACY 1
>> +#define XHCI_EXT_CAPS_PROTOCOL       2
>> +#define XHCI_EXT_CAPS_PM     3
>> +#define XHCI_EXT_CAPS_VIRT   4
>> +#define XHCI_EXT_CAPS_ROUTE  5
>> +/* IDs 6-9 reserved */
>> +#define XHCI_EXT_CAPS_DEBUG  10
>> +/* USB Legacy Support Capability - section 7.1.1 */
>> +#define XHCI_HC_BIOS_OWNED   (1 << 16)
>> +#define XHCI_HC_OS_OWNED     (1 << 24)
>> +
>> +/* USB Legacy Support Capability - section 7.1.1 */
>> +/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
>> +#define XHCI_LEGACY_SUPPORT_OFFSET   (0x00)
>> +
>> +/* USB Legacy Support Control and Status Register  - section 7.1.2 */
>> +/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
>> +#define XHCI_LEGACY_CONTROL_OFFSET   (0x04)
>> +/* bits 1:2, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
>> +#define      XHCI_LEGACY_DISABLE_SMI         ((0x3 << 1) + (0xff << 5) + (0x7 << 17))
>> +
>> +/* USB 2.0 xHCI 0.96 L1C capability - section 7.2.2.1.3.2 */
>> +#define XHCI_L1C               (1 << 16)
>> +
>> +/* USB 2.0 xHCI 1.0 hardware LMP capability - section 7.2.2.1.3.2 */
>> +#define XHCI_HLC               (1 << 19)
>> +
>> +/* command register values to disable interrupts and halt the HC */
>> +/* start/stop HC execution - do not write unless HC is halted*/
>> +#define XHCI_CMD_RUN         (1 << 0)
>> +/* Event Interrupt Enable - get irq when EINT bit is set in USBSTS register */
>> +#define XHCI_CMD_EIE         (1 << 2)
>> +/* Host System Error Interrupt Enable - get irq when HSEIE bit set in USBSTS */
>> +#define XHCI_CMD_HSEIE               (1 << 3)
>> +/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
>> +#define XHCI_CMD_EWE         (1 << 10)
>> +
>> +#define XHCI_IRQS            (XHCI_CMD_EIE | XHCI_CMD_HSEIE | XHCI_CMD_EWE)
>> +
>> +/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
>> +#define XHCI_STS_CNR         (1 << 11)
>> +
>> +struct xhci_ctrl {
>> +     struct xhci_hccr *hccr; /* R/O registers, not need for volatile */
>> +     struct xhci_hcor *hcor;
>> +     struct xhci_doorbell_array *dba;
>> +     struct xhci_run_regs *run_regs;
>> +     struct xhci_device_context_array *dcbaa         \
>> +                     __attribute__ ((aligned(ARCH_DMA_MINALIGN)));
>> +     struct xhci_ring *event_ring;
>> +     struct xhci_ring *cmd_ring;
>> +     struct xhci_ring *transfer_ring;
>> +     struct xhci_segment *seg;
>> +     struct xhci_intr_reg *ir_set;
>> +     struct xhci_erst erst;
>> +     struct xhci_erst_entry entry[ERST_NUM_SEGS];
>> +     struct xhci_virt_device *devs[MAX_HC_SLOTS];
>> +     int rootdev;
>> +};
>> +
>> +unsigned long trb_addr(struct xhci_segment *seg, union xhci_trb *trb);
>> +struct xhci_input_control_ctx
>> +             *xhci_get_input_control_ctx(struct xhci_container_ctx *ctx);
>> +struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_ctrl *ctrl,
>> +                                     struct xhci_container_ctx *ctx);
>> +struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_ctrl *ctrl,
>> +                                 struct xhci_container_ctx *ctx,
>> +                                 unsigned int ep_index);
>> +void xhci_endpoint_copy(struct xhci_ctrl *ctrl,
>> +                     struct xhci_container_ctx *in_ctx,
>> +                     struct xhci_container_ctx *out_ctx,
>> +                     unsigned int ep_index);
>> +void xhci_slot_copy(struct xhci_ctrl *ctrl,
>> +                 struct xhci_container_ctx *in_ctx,
>> +                 struct xhci_container_ctx *out_ctx);
>> +void xhci_setup_addressable_virt_dev(struct usb_device *udev);
>> +void xhci_queue_command(struct xhci_ctrl *ctrl, u8 *ptr,
>> +                     u32 slot_id, u32 ep_index, trb_type cmd);
>> +void xhci_acknowledge_event(struct xhci_ctrl *ctrl);
>> +union xhci_trb *xhci_wait_for_event(struct xhci_ctrl *ctrl, trb_type expected);
>> +int xhci_bulk_tx(struct usb_device *udev, unsigned long pipe,
>> +              int length, void *buffer);
>> +int xhci_ctrl_tx(struct usb_device *udev, unsigned long pipe,
>> +              struct devrequest *req, int length, void *buffer);
>> +int xhci_check_maxpacket(struct usb_device *udev);
>> +void xhci_flush_cache(uint32_t addr, u32 type_len);
>> +void xhci_inval_cache(uint32_t addr, u32 type_len);
>> +void xhci_cleanup(struct xhci_ctrl *ctrl);
>> +struct xhci_ring *xhci_ring_alloc(unsigned int num_segs, bool link_trbs);
>> +int xhci_alloc_virt_device(struct usb_device *udev);
>> +int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr,
>> +               struct xhci_hcor *hcor);
>> +
>> +#endif /* HOST_XHCI_H_ */
>> diff --git a/include/usb.h b/include/usb.h
>> index 60db897..a96ec23 100644
>> --- a/include/usb.h
>> +++ b/include/usb.h
>> @@ -125,6 +125,8 @@ struct usb_device {
>>       struct usb_device *children[USB_MAXCHILDREN];
>>
>>       void *controller;               /* hardware controller private data */
>> +     /* slot_id - for xHCI enabled devices */
>> +     unsigned int slot_id;
>>  };
>>
>>  /**********************************************************************
>> @@ -138,7 +140,7 @@ struct usb_device {
>>       defined(CONFIG_USB_OMAP3) || defined(CONFIG_USB_DA8XX) || \
>>       defined(CONFIG_USB_BLACKFIN) || defined(CONFIG_USB_AM35X) || \
>>       defined(CONFIG_USB_MUSB_DSPS) || defined(CONFIG_USB_MUSB_AM35X) || \
>> -     defined(CONFIG_USB_MUSB_OMAP2PLUS)
>> +     defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined(CONFIG_USB_XHCI)
>>
>>  int usb_lowlevel_init(int index, void **controller);
>>  int usb_lowlevel_stop(int index);
>> @@ -338,6 +340,10 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
>>  #define usb_pipecontrol(pipe)        (usb_pipetype((pipe)) == PIPE_CONTROL)
>>  #define usb_pipebulk(pipe)   (usb_pipetype((pipe)) == PIPE_BULK)
>>
>> +#define usb_pipe_ep_index(pipe)      \
>> +             usb_pipecontrol(pipe) ? (usb_pipeendpoint(pipe) * 2) : \
>> +                             ((usb_pipeendpoint(pipe) * 2) - \
>> +                              (usb_pipein(pipe) ? 0 : 1))
>>
>>  /*************************************************************************
>>   * Hub Stuff
>> @@ -382,5 +388,6 @@ struct usb_device *usb_alloc_new_device(void *controller);
>>
>>  int usb_new_device(struct usb_device *dev);
>>  void usb_free_device(void);
>> +int usb_alloc_device(struct usb_device *dev);
>>
>>  #endif /*_USB_H_ */
> Various Checkpatch errors, warnings and checks
>
> total: 1 errors, 56 warnings, 48 checks, 4103 lines checked
>
> --
> ------------------
> Dan Murphy
>
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot