| Message ID | 1376673628-5867-2-git-send-email-swarren@wwwdotorg.org |
|---|---|
| State | New |
| Headers | show |
+ Mike Turquette Stephen Warren <swarren@wwwdotorg.org> writes: > This branch includes a number of enhancements to core SoC support for > Tegra devices. The major new features are: > > * Adds a new CPU-power-gated cpuidle state for Tegra114. > * Adds initial system suspend support for Tegra114, initially supporting > just CPU-power-gating during suspend. > * Adds "LP1" suspend mode support for all of Tegra20/30/114. This mode > both gates CPU power, and places the DRAM into self-refresh mode. > * A new DT-driven PCIe driver to Tegra20/30. The driver is also moved > from arch/arm/mach-tegra/ to drivers/pci/host/. > > The PCIe driver work depends on the following tag from Thomas Petazzoni: > git://git.infradead.org/linux-mvebu.git mis-3.12.2 > ... which is merged into the middle of this pull request. > > ---------------------------------------------------------------- > > (If the location of the merge into this branch is problematic, just let > me know and I'll rebase everything on top of the merge) The merge looks fine, but... > The following changes since commit ad81f0545ef01ea651886dddac4bef6cec930092: > > Linux 3.11-rc1 > > are available in the git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra.git tegra-for-3.12-soc > > for you to fetch changes up to b4f173752a56187bd55752b0474429202f2ab1d3: > > ARM: tegra: disable LP2 cpuidle state if PCIe is enabled > > ---------------------------------------------------------------- > > Jay Agarwal (1): > PCI: tegra: Add Tegra 30 PCIe support > > Joseph Lo (21): > ARM: tegra: enable Cortex-A15 erratum 798181 > Revert "ARM: tegra: add cpu_disable for hotplug" > ARM: tegra114: Reprogram GIC CPU interface to bypass IRQ on CPU PM entry > ARM: tegra114: add low level support for CPU idle powered-down mode > ARM: tegra114: cpuidle: add powered-down state > ARM: tegra: do v7_invalidate_l1 only when CPU is Cortex-A9 > ARM: tegra: add a flag for tegra_disable_clean_inv_dcache to do LoUIS or ALL > ARM: tegra: set up the correct L2 data RAM latency for Cortex-A15 > ARM: tegra: add low level code for Tegra114 cluster power down > ARM: tegra: shut off the CPU rail when the last CPU in suspend > ARM: tegra: hook tegra_tear_down_cpu function > ARM: tegra: flowctrl: add support for cpu_suspend_enter/exit > clk: tegra: add suspend/resume function for tegra_cpu_car_ops This one... > ARM: tegra: remove the limitation that Tegra114 can't support suspend > ARM: tegra: add common resume handling code for LP1 resuming > ARM: tegra: config the polarity of the request of sys clock > clk: tegra114: add LP1 suspend/resume support ...and this one are drivers/clk and I don't see an ack from the clock framework maintainer (Mike Turquette) on either. If Mike is OK for them to go via arm-soc, that should be specified in the description above (and he should ack them), otherwise they should be split out and sent via Mike. A quick glance suggests there are no direct dependencies, so it's probably best if those changes go through Mike. Thanks, Kevin
On 08/20/2013 05:24 PM, Kevin Hilman wrote: > + Mike Turquette > > Stephen Warren <swarren@wwwdotorg.org> writes: > >> This branch includes a number of enhancements to core SoC support for >> Tegra devices. The major new features are: >> >> * Adds a new CPU-power-gated cpuidle state for Tegra114. >> * Adds initial system suspend support for Tegra114, initially supporting >> just CPU-power-gating during suspend. >> * Adds "LP1" suspend mode support for all of Tegra20/30/114. This mode >> both gates CPU power, and places the DRAM into self-refresh mode. >> * A new DT-driven PCIe driver to Tegra20/30. The driver is also moved >> from arch/arm/mach-tegra/ to drivers/pci/host/. >> >> The PCIe driver work depends on the following tag from Thomas Petazzoni: >> git://git.infradead.org/linux-mvebu.git mis-3.12.2 >> ... which is merged into the middle of this pull request. >> >> ---------------------------------------------------------------- >> >> (If the location of the merge into this branch is problematic, just let >> me know and I'll rebase everything on top of the merge) > > The merge looks fine, but... > >> The following changes since commit ad81f0545ef01ea651886dddac4bef6cec930092: >> >> Linux 3.11-rc1 >> >> are available in the git repository at: >> >> git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra.git tegra-for-3.12-soc >> >> for you to fetch changes up to b4f173752a56187bd55752b0474429202f2ab1d3: >> >> ARM: tegra: disable LP2 cpuidle state if PCIe is enabled >> >> ---------------------------------------------------------------- >> >> Jay Agarwal (1): >> PCI: tegra: Add Tegra 30 PCIe support >> >> Joseph Lo (21): >> ARM: tegra: enable Cortex-A15 erratum 798181 >> Revert "ARM: tegra: add cpu_disable for hotplug" >> ARM: tegra114: Reprogram GIC CPU interface to bypass IRQ on CPU PM entry >> ARM: tegra114: add low level support for CPU idle powered-down mode >> ARM: tegra114: cpuidle: add powered-down state >> ARM: tegra: do v7_invalidate_l1 only when CPU is Cortex-A9 >> ARM: tegra: add a flag for tegra_disable_clean_inv_dcache to do LoUIS or ALL >> ARM: tegra: set up the correct L2 data RAM latency for Cortex-A15 >> ARM: tegra: add low level code for Tegra114 cluster power down >> ARM: tegra: shut off the CPU rail when the last CPU in suspend >> ARM: tegra: hook tegra_tear_down_cpu function >> ARM: tegra: flowctrl: add support for cpu_suspend_enter/exit >> clk: tegra: add suspend/resume function for tegra_cpu_car_ops > > This one... > >> ARM: tegra: remove the limitation that Tegra114 can't support suspend >> ARM: tegra: add common resume handling code for LP1 resuming >> ARM: tegra: config the polarity of the request of sys clock >> clk: tegra114: add LP1 suspend/resume support > > ...and this one are drivers/clk and I don't see an ack from the > clock framework maintainer (Mike Turquette) on either. > > If Mike is OK for them to go via arm-soc, that should be specified in > the description above (and he should ack them), otherwise they should be > split out and sent via Mike. > > A quick glance suggests there are no direct dependencies, so it's > probably best if those changes go through Mike. There are at least run-time dependencies here, although it's possible they're limited to "suspend won't work on Tegra114 unless all those patches are present" rather than "if all these patches aren't present, something other than a new feature will regress due to this series". Mike's certainly been CC'd on the patches many times as quite a few versions of each were posted, and I asked for acks, but got no response. In the past, that's meant he's fine with the patches...
On 08/20/2013 07:28 PM, Mike Turquette wrote: > Quoting Stephen Warren (2013-08-20 16:28:25) >> On 08/20/2013 05:24 PM, Kevin Hilman wrote: >>> + Mike Turquette >>> >>> Stephen Warren <swarren@wwwdotorg.org> writes: >>> >>>> This branch includes a number of enhancements to core SoC support for >>>> Tegra devices. The major new features are: >>>> >>>> * Adds a new CPU-power-gated cpuidle state for Tegra114. >>>> * Adds initial system suspend support for Tegra114, initially supporting >>>> just CPU-power-gating during suspend. >>>> * Adds "LP1" suspend mode support for all of Tegra20/30/114. This mode >>>> both gates CPU power, and places the DRAM into self-refresh mode. >>>> * A new DT-driven PCIe driver to Tegra20/30. The driver is also moved >>>> from arch/arm/mach-tegra/ to drivers/pci/host/. >>>> >>>> The PCIe driver work depends on the following tag from Thomas Petazzoni: >>>> git://git.infradead.org/linux-mvebu.git mis-3.12.2 >>>> ... which is merged into the middle of this pull request. >>>> >>>> ---------------------------------------------------------------- >>>> >>>> (If the location of the merge into this branch is problematic, just let >>>> me know and I'll rebase everything on top of the merge) >>> >>> The merge looks fine, but... >>> >>>> The following changes since commit ad81f0545ef01ea651886dddac4bef6cec930092: >>>> >>>> Linux 3.11-rc1 >>>> >>>> are available in the git repository at: >>>> >>>> git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra.git tegra-for-3.12-soc >>>> >>>> for you to fetch changes up to b4f173752a56187bd55752b0474429202f2ab1d3: >>>> >>>> ARM: tegra: disable LP2 cpuidle state if PCIe is enabled >>>> >>>> ---------------------------------------------------------------- >>>> >>>> Jay Agarwal (1): >>>> PCI: tegra: Add Tegra 30 PCIe support >>>> >>>> Joseph Lo (21): >>>> ARM: tegra: enable Cortex-A15 erratum 798181 >>>> Revert "ARM: tegra: add cpu_disable for hotplug" >>>> ARM: tegra114: Reprogram GIC CPU interface to bypass IRQ on CPU PM entry >>>> ARM: tegra114: add low level support for CPU idle powered-down mode >>>> ARM: tegra114: cpuidle: add powered-down state >>>> ARM: tegra: do v7_invalidate_l1 only when CPU is Cortex-A9 >>>> ARM: tegra: add a flag for tegra_disable_clean_inv_dcache to do LoUIS or ALL >>>> ARM: tegra: set up the correct L2 data RAM latency for Cortex-A15 >>>> ARM: tegra: add low level code for Tegra114 cluster power down >>>> ARM: tegra: shut off the CPU rail when the last CPU in suspend >>>> ARM: tegra: hook tegra_tear_down_cpu function >>>> ARM: tegra: flowctrl: add support for cpu_suspend_enter/exit >>>> clk: tegra: add suspend/resume function for tegra_cpu_car_ops >>> >>> This one... >>> >>>> ARM: tegra: remove the limitation that Tegra114 can't support suspend >>>> ARM: tegra: add common resume handling code for LP1 resuming >>>> ARM: tegra: config the polarity of the request of sys clock >>>> clk: tegra114: add LP1 suspend/resume support >>> >>> ...and this one are drivers/clk and I don't see an ack from the >>> clock framework maintainer (Mike Turquette) on either. >>> >>> If Mike is OK for them to go via arm-soc, that should be specified in >>> the description above (and he should ack them), otherwise they should be >>> split out and sent via Mike. >>> >>> A quick glance suggests there are no direct dependencies, so it's >>> probably best if those changes go through Mike. >> >> There are at least run-time dependencies here, although it's possible >> they're limited to "suspend won't work on Tegra114 unless all those >> patches are present" rather than "if all these patches aren't present, >> something other than a new feature will regress due to this series". >> >> Mike's certainly been CC'd on the patches many times as quite a few >> versions of each were posted, and I asked for acks, but got no response. >> In the past, that's meant he's fine with the patches... > > Hi Stephen, > > Let's not set the precedent of silence conferring an Ack. For the patch > "clk: tegra: add suspend/resume function for tegra_cpu_car_ops" I gave > the V1 patch a "looks good to me" response but I seemed to have missed > the V2 patch: > http://article.gmane.org/gmane.linux.ports.tegra/12213 Yes, it looks like Joseph simply didn't add the ack to the commit. I'll follow up internally to make sure people get the process right. > For the patch "clk: tegra114: add LP1 suspend/resume support" I hadn't > bothered to review since there were plenty of comments on V1 & V2. The > same day V3 was posted it was merged into your tree. I should have given > it a post-merge Ack but didn't. Sorry to be picky, but I don't think there were any comments on this specific patch in V1. Admittedly there were some on V2, and by the time V3 had come around I had forgotten that there were actually changes to the clk patch within the series. All these series that require so many revisions wear me down:-( It'd be really useful if you could reply to the patches and let us know you've seen them and are deliberately holding off on reviewing them. That way I'll know you aren't just ignoring them due to e.g. too much mail. Or, review v1 rather than waiting for any other issues to be resolved in the series. In the past, I got the impression that you cared mostly about the core common clock implementation, and didn't really care what happened inside the individual clock drivers, and were happy to just have the relevant SoC maintainers review them. Hence, I have treated your ack on drivers/clk/tegra/* as a bonus more than a necessity. > Anyways the changes are fine by me. Kevin if you don't mind applying it: > Acked-by: Mike Turquette <mturquette@linaro.org> Thanks.
Stephen Warren <swarren@wwwdotorg.org> writes: > On 08/20/2013 07:28 PM, Mike Turquette wrote: >> Quoting Stephen Warren (2013-08-20 16:28:25) >>> On 08/20/2013 05:24 PM, Kevin Hilman wrote: >>>> + Mike Turquette >>>> >>>> Stephen Warren <swarren@wwwdotorg.org> writes: >>>> >>>>> This branch includes a number of enhancements to core SoC support for >>>>> Tegra devices. The major new features are: >>>>> >>>>> * Adds a new CPU-power-gated cpuidle state for Tegra114. >>>>> * Adds initial system suspend support for Tegra114, initially supporting >>>>> just CPU-power-gating during suspend. >>>>> * Adds "LP1" suspend mode support for all of Tegra20/30/114. This mode >>>>> both gates CPU power, and places the DRAM into self-refresh mode. >>>>> * A new DT-driven PCIe driver to Tegra20/30. The driver is also moved >>>>> from arch/arm/mach-tegra/ to drivers/pci/host/. >>>>> >>>>> The PCIe driver work depends on the following tag from Thomas Petazzoni: >>>>> git://git.infradead.org/linux-mvebu.git mis-3.12.2 >>>>> ... which is merged into the middle of this pull request. >>>>> >>>>> ---------------------------------------------------------------- >>>>> >>>>> (If the location of the merge into this branch is problematic, just let >>>>> me know and I'll rebase everything on top of the merge) >>>> >>>> The merge looks fine, but... >>>> >>>>> The following changes since commit ad81f0545ef01ea651886dddac4bef6cec930092: >>>>> >>>>> Linux 3.11-rc1 >>>>> >>>>> are available in the git repository at: >>>>> >>>>> git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra.git tegra-for-3.12-soc >>>>> >>>>> for you to fetch changes up to b4f173752a56187bd55752b0474429202f2ab1d3: >>>>> >>>>> ARM: tegra: disable LP2 cpuidle state if PCIe is enabled >>>>> >>>>> ---------------------------------------------------------------- >>>>> >>>>> Jay Agarwal (1): >>>>> PCI: tegra: Add Tegra 30 PCIe support >>>>> >>>>> Joseph Lo (21): >>>>> ARM: tegra: enable Cortex-A15 erratum 798181 >>>>> Revert "ARM: tegra: add cpu_disable for hotplug" >>>>> ARM: tegra114: Reprogram GIC CPU interface to bypass IRQ on CPU PM entry >>>>> ARM: tegra114: add low level support for CPU idle powered-down mode >>>>> ARM: tegra114: cpuidle: add powered-down state >>>>> ARM: tegra: do v7_invalidate_l1 only when CPU is Cortex-A9 >>>>> ARM: tegra: add a flag for tegra_disable_clean_inv_dcache to do LoUIS or ALL >>>>> ARM: tegra: set up the correct L2 data RAM latency for Cortex-A15 >>>>> ARM: tegra: add low level code for Tegra114 cluster power down >>>>> ARM: tegra: shut off the CPU rail when the last CPU in suspend >>>>> ARM: tegra: hook tegra_tear_down_cpu function >>>>> ARM: tegra: flowctrl: add support for cpu_suspend_enter/exit >>>>> clk: tegra: add suspend/resume function for tegra_cpu_car_ops >>>> >>>> This one... >>>> >>>>> ARM: tegra: remove the limitation that Tegra114 can't support suspend >>>>> ARM: tegra: add common resume handling code for LP1 resuming >>>>> ARM: tegra: config the polarity of the request of sys clock >>>>> clk: tegra114: add LP1 suspend/resume support >>>> >>>> ...and this one are drivers/clk and I don't see an ack from the >>>> clock framework maintainer (Mike Turquette) on either. >>>> >>>> If Mike is OK for them to go via arm-soc, that should be specified in >>>> the description above (and he should ack them), otherwise they should be >>>> split out and sent via Mike. >>>> >>>> A quick glance suggests there are no direct dependencies, so it's >>>> probably best if those changes go through Mike. >>> >>> There are at least run-time dependencies here, although it's possible >>> they're limited to "suspend won't work on Tegra114 unless all those >>> patches are present" rather than "if all these patches aren't present, >>> something other than a new feature will regress due to this series". >>> >>> Mike's certainly been CC'd on the patches many times as quite a few >>> versions of each were posted, and I asked for acks, but got no response. >>> In the past, that's meant he's fine with the patches... >> >> Hi Stephen, >> >> Let's not set the precedent of silence conferring an Ack. For the patch >> "clk: tegra: add suspend/resume function for tegra_cpu_car_ops" I gave >> the V1 patch a "looks good to me" response but I seemed to have missed >> the V2 patch: >> http://article.gmane.org/gmane.linux.ports.tegra/12213 > > Yes, it looks like Joseph simply didn't add the ack to the commit. I'll > follow up internally to make sure people get the process right. > >> For the patch "clk: tegra114: add LP1 suspend/resume support" I hadn't >> bothered to review since there were plenty of comments on V1 & V2. The >> same day V3 was posted it was merged into your tree. I should have given >> it a post-merge Ack but didn't. > > Sorry to be picky, but I don't think there were any comments on this > specific patch in V1. Admittedly there were some on V2, and by the time > V3 had come around I had forgotten that there were actually changes to > the clk patch within the series. All these series that require so many > revisions wear me down:-( > > It'd be really useful if you could reply to the patches and let us know > you've seen them and are deliberately holding off on reviewing them. > That way I'll know you aren't just ignoring them due to e.g. too much > mail. Or, review v1 rather than waiting for any other issues to be > resolved in the series. In the past, I got the impression that you cared > mostly about the core common clock implementation, and didn't really > care what happened inside the individual clock drivers, and were happy > to just have the relevant SoC maintainers review them. Hence, I have > treated your ack on drivers/clk/tegra/* as a bonus more than a necessity. > >> Anyways the changes are fine by me. Kevin if you don't mind applying it: >> Acked-by: Mike Turquette <mturquette@linaro.org> > > Thanks. Pulled into next/soc. Kevin
On Thu, 2013-08-22 at 00:06 +0800, Stephen Warren wrote: > On 08/20/2013 07:28 PM, Mike Turquette wrote: > > Quoting Stephen Warren (2013-08-20 16:28:25) > >> On 08/20/2013 05:24 PM, Kevin Hilman wrote: > >>> + Mike Turquette > >>> > >>> Stephen Warren <swarren@wwwdotorg.org> writes: > >>> > >>>> This branch includes a number of enhancements to core SoC support for > >>>> Tegra devices. The major new features are: [...] > >>>> ---------------------------------------------------------------- > >>>> > >>>> Jay Agarwal (1): > >>>> PCI: tegra: Add Tegra 30 PCIe support > >>>> > >>>> Joseph Lo (21): > >>>> ARM: tegra: enable Cortex-A15 erratum 798181 > >>>> Revert "ARM: tegra: add cpu_disable for hotplug" > >>>> ARM: tegra114: Reprogram GIC CPU interface to bypass IRQ on CPU PM entry > >>>> ARM: tegra114: add low level support for CPU idle powered-down mode > >>>> ARM: tegra114: cpuidle: add powered-down state > >>>> ARM: tegra: do v7_invalidate_l1 only when CPU is Cortex-A9 > >>>> ARM: tegra: add a flag for tegra_disable_clean_inv_dcache to do LoUIS or ALL > >>>> ARM: tegra: set up the correct L2 data RAM latency for Cortex-A15 > >>>> ARM: tegra: add low level code for Tegra114 cluster power down > >>>> ARM: tegra: shut off the CPU rail when the last CPU in suspend > >>>> ARM: tegra: hook tegra_tear_down_cpu function > >>>> ARM: tegra: flowctrl: add support for cpu_suspend_enter/exit > >>>> clk: tegra: add suspend/resume function for tegra_cpu_car_ops > >>> > >>> This one... > >>> > >>>> ARM: tegra: remove the limitation that Tegra114 can't support suspend > >>>> ARM: tegra: add common resume handling code for LP1 resuming > >>>> ARM: tegra: config the polarity of the request of sys clock > >>>> clk: tegra114: add LP1 suspend/resume support > >>> > >>> ...and this one are drivers/clk and I don't see an ack from the > >>> clock framework maintainer (Mike Turquette) on either. > >>> > >>> If Mike is OK for them to go via arm-soc, that should be specified in > >>> the description above (and he should ack them), otherwise they should be > >>> split out and sent via Mike. > >>> > >>> A quick glance suggests there are no direct dependencies, so it's > >>> probably best if those changes go through Mike. > >> > >> There are at least run-time dependencies here, although it's possible > >> they're limited to "suspend won't work on Tegra114 unless all those > >> patches are present" rather than "if all these patches aren't present, > >> something other than a new feature will regress due to this series". > >> > >> Mike's certainly been CC'd on the patches many times as quite a few > >> versions of each were posted, and I asked for acks, but got no response. > >> In the past, that's meant he's fine with the patches... > > > > Hi Stephen, > > > > Let's not set the precedent of silence conferring an Ack. For the patch > > "clk: tegra: add suspend/resume function for tegra_cpu_car_ops" I gave > > the V1 patch a "looks good to me" response but I seemed to have missed > > the V2 patch: > > http://article.gmane.org/gmane.linux.ports.tegra/12213 > > Yes, it looks like Joseph simply didn't add the ack to the commit. I'll > follow up internally to make sure people get the process right. > This was because the ack was coming after the patch had been merged. :-(
This branch includes a number of enhancements to core SoC support for Tegra devices. The major new features are: * Adds a new CPU-power-gated cpuidle state for Tegra114. * Adds initial system suspend support for Tegra114, initially supporting just CPU-power-gating during suspend. * Adds "LP1" suspend mode support for all of Tegra20/30/114. This mode both gates CPU power, and places the DRAM into self-refresh mode. * A new DT-driven PCIe driver to Tegra20/30. The driver is also moved from arch/arm/mach-tegra/ to drivers/pci/host/. The PCIe driver work depends on the following tag from Thomas Petazzoni: git://git.infradead.org/linux-mvebu.git mis-3.12.2 ... which is merged into the middle of this pull request. ---------------------------------------------------------------- (If the location of the merge into this branch is problematic, just let me know and I'll rebase everything on top of the merge) The following changes since commit ad81f0545ef01ea651886dddac4bef6cec930092: Linux 3.11-rc1 are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra.git tegra-for-3.12-soc for you to fetch changes up to b4f173752a56187bd55752b0474429202f2ab1d3: ARM: tegra: disable LP2 cpuidle state if PCIe is enabled ---------------------------------------------------------------- Jay Agarwal (1): PCI: tegra: Add Tegra 30 PCIe support Joseph Lo (21): ARM: tegra: enable Cortex-A15 erratum 798181 Revert "ARM: tegra: add cpu_disable for hotplug" ARM: tegra114: Reprogram GIC CPU interface to bypass IRQ on CPU PM entry ARM: tegra114: add low level support for CPU idle powered-down mode ARM: tegra114: cpuidle: add powered-down state ARM: tegra: do v7_invalidate_l1 only when CPU is Cortex-A9 ARM: tegra: add a flag for tegra_disable_clean_inv_dcache to do LoUIS or ALL ARM: tegra: set up the correct L2 data RAM latency for Cortex-A15 ARM: tegra: add low level code for Tegra114 cluster power down ARM: tegra: shut off the CPU rail when the last CPU in suspend ARM: tegra: hook tegra_tear_down_cpu function ARM: tegra: flowctrl: add support for cpu_suspend_enter/exit clk: tegra: add suspend/resume function for tegra_cpu_car_ops ARM: tegra: remove the limitation that Tegra114 can't support suspend ARM: tegra: add common resume handling code for LP1 resuming ARM: tegra: config the polarity of the request of sys clock clk: tegra114: add LP1 suspend/resume support ARM: tegra: add common LP1 suspend support ARM: tegra: add LP1 suspend support for Tegra30 ARM: tegra: add LP1 suspend support for Tegra20 ARM: tegra: add LP1 suspend support for Tegra114 Stephen Warren (4): ARM: tegra: unify Tegra's Kconfig a bit more Merge tag 'msi-3.12-2' into for-3.12/soc PCI: tegra: set up PADS_REFCLK_CFG1 ARM: tegra: disable LP2 cpuidle state if PCIe is enabled Thierry Reding (3): PCI: tegra: Move PCIe driver to drivers/pci/host MAINTAINERS: Add myself as Tegra PCIe maintainer (and the following from the dependency branch) Thierry Reding (3): PCI: Introduce new MSI chip infrastructure Thomas Petazzoni (5): PCI: use weak functions for MSI arch-specific functions PCI: remove ARCH_SUPPORTS_MSI kconfig option of: pci: add registry of MSI chips ARM: pci: add ->add_bus() and ->remove_bus() hooks to hw_pci PCI: msi: add default MSI operations for !HAVE_GENERIC_HARDIRQS platforms .../bindings/pci/nvidia,tegra20-pcie.txt | 163 ++ MAINTAINERS | 7 + arch/arm/Kconfig | 1 - arch/arm/include/asm/mach/pci.h | 4 + arch/arm/kernel/bios32.c | 16 + arch/arm/mach-tegra/Kconfig | 29 +- arch/arm/mach-tegra/Makefile | 6 +- arch/arm/mach-tegra/board-harmony-pcie.c | 89 - arch/arm/mach-tegra/board.h | 8 - arch/arm/mach-tegra/common.h | 1 - arch/arm/mach-tegra/cpuidle-tegra114.c | 51 +- arch/arm/mach-tegra/cpuidle-tegra20.c | 12 + arch/arm/mach-tegra/cpuidle.c | 10 + arch/arm/mach-tegra/cpuidle.h | 1 + arch/arm/mach-tegra/flowctrl.c | 2 + arch/arm/mach-tegra/flowctrl.h | 9 + arch/arm/mach-tegra/headsmp.S | 3 +- arch/arm/mach-tegra/hotplug.c | 13 +- arch/arm/mach-tegra/iomap.h | 11 +- arch/arm/mach-tegra/irq.c | 40 + arch/arm/mach-tegra/pcie.c | 886 --------- arch/arm/mach-tegra/platsmp.c | 1 - arch/arm/mach-tegra/pm-tegra20.c | 34 + arch/arm/mach-tegra/pm-tegra30.c | 34 + arch/arm/mach-tegra/pm.c | 148 +- arch/arm/mach-tegra/pm.h | 12 + arch/arm/mach-tegra/pmc.c | 53 +- arch/arm/mach-tegra/pmc.h | 3 + arch/arm/mach-tegra/reset-handler.S | 21 +- arch/arm/mach-tegra/reset.c | 2 + arch/arm/mach-tegra/reset.h | 4 + arch/arm/mach-tegra/sleep-tegra20.S | 297 +++ arch/arm/mach-tegra/sleep-tegra30.S | 616 ++++++- arch/arm/mach-tegra/sleep.S | 37 +- arch/arm/mach-tegra/sleep.h | 14 +- arch/arm/mach-tegra/tegra.c | 24 - arch/ia64/Kconfig | 1 - arch/mips/Kconfig | 2 - arch/mips/include/asm/pci.h | 5 - arch/powerpc/Kconfig | 1 - arch/powerpc/include/asm/pci.h | 5 - arch/s390/Kconfig | 1 - arch/s390/include/asm/pci.h | 4 - arch/sparc/Kconfig | 1 - arch/tile/Kconfig | 1 - arch/x86/Kconfig | 1 - arch/x86/include/asm/pci.h | 30 - arch/x86/kernel/x86_init.c | 24 + drivers/clk/tegra/clk-tegra114.c | 38 + drivers/of/of_pci.c | 45 + drivers/pci/Kconfig | 4 - drivers/pci/host/Kconfig | 4 + drivers/pci/host/Makefile | 1 + drivers/pci/host/pci-tegra.c | 1702 ++++++++++++++++++ drivers/pci/msi.c | 85 +- drivers/pci/probe.c | 1 + include/linux/msi.h | 21 +- include/linux/of_pci.h | 12 + include/linux/pci.h | 1 + include/linux/tegra-cpuidle.h | 19 + 60 files changed, 3521 insertions(+), 1150 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt delete mode 100644 arch/arm/mach-tegra/board-harmony-pcie.c delete mode 100644 arch/arm/mach-tegra/pcie.c create mode 100644 arch/arm/mach-tegra/pm-tegra20.c create mode 100644 arch/arm/mach-tegra/pm-tegra30.c create mode 100644 drivers/pci/host/pci-tegra.c create mode 100644 include/linux/tegra-cpuidle.h