| Message ID | 1375966287-6784-7-git-send-email-LW@KARO-electronics.de |
|---|---|
| State | New |
| Headers | show |
On Thu, Aug 08, 2013 at 02:51:25PM +0200, Lothar Waßmann wrote: > > Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> > --- > arch/arm/boot/dts/imx28.dtsi | 22 ++++++++++++++++++++++ > 1 files changed, 22 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi > index 7363fde..f941648 100644 > --- a/arch/arm/boot/dts/imx28.dtsi > +++ b/arch/arm/boot/dts/imx28.dtsi > @@ -731,6 +731,17 @@ > fsl,pull-up = <0>; > }; > > + usbphy0_pins_c: usbphy0@2 { > + reg = <2>; > + fsl,pinmux-ids = < > + 0x0123 /* MX28_PAD_GPMI_CE2N__GPIO_0_18 - USBOTG_VBUSEN */ > + 0x0133 /* MX28_PAD_GPMI_CE3N__GPIO_0_19 - USBOTH_OC */ The GPIO usage is something board specific and should be set up at board level DTS. Shawn > + >; > + fsl,drive-strength = <2>; > + fsl,voltage = <1>; > + fsl,pull-up = <0>; > + }; > + > usbphy1_pins_a: usbphy1@0 { > reg = <0>; > fsl,pinmux-ids = < > @@ -740,6 +751,17 @@ > fsl,voltage = <1>; > fsl,pull-up = <0>; > }; > + > + usbphy1_pins_b: usbphy1@1 { > + reg = <1>; > + fsl,pinmux-ids = < > + 0x31b3 /* MX28_PAD_SPDIF__GPIO_3_27 - USBH_VBUSEN */ > + 0x4143 /* MX28_PAD_JTAG_RTCK__GPIO_4_20 - USBH_OC */ > + >; > + fsl,drive-strength = <2>; > + fsl,voltage = <1>; > + fsl,pull-up = <0>; > + }; > }; > > digctl: digctl@8001c000 { > -- > 1.7.2.5 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 7363fde..f941648 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -731,6 +731,17 @@ fsl,pull-up = <0>; }; + usbphy0_pins_c: usbphy0@2 { + reg = <2>; + fsl,pinmux-ids = < + 0x0123 /* MX28_PAD_GPMI_CE2N__GPIO_0_18 - USBOTG_VBUSEN */ + 0x0133 /* MX28_PAD_GPMI_CE3N__GPIO_0_19 - USBOTH_OC */ + >; + fsl,drive-strength = <2>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + usbphy1_pins_a: usbphy1@0 { reg = <0>; fsl,pinmux-ids = < @@ -740,6 +751,17 @@ fsl,voltage = <1>; fsl,pull-up = <0>; }; + + usbphy1_pins_b: usbphy1@1 { + reg = <1>; + fsl,pinmux-ids = < + 0x31b3 /* MX28_PAD_SPDIF__GPIO_3_27 - USBH_VBUSEN */ + 0x4143 /* MX28_PAD_JTAG_RTCK__GPIO_4_20 - USBH_OC */ + >; + fsl,drive-strength = <2>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; }; digctl: digctl@8001c000 {
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> --- arch/arm/boot/dts/imx28.dtsi | 22 ++++++++++++++++++++++ 1 files changed, 22 insertions(+), 0 deletions(-)