@@ -86,13 +86,6 @@ static void coroutine_fn bdrv_co_do_rw(void *opaque);
static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
int64_t sector_num, int nb_sectors);
-static bool bdrv_exceed_bps_limits(BlockDriverState *bs, int nb_sectors,
- bool is_write, double elapsed_time, uint64_t *wait);
-static bool bdrv_exceed_iops_limits(BlockDriverState *bs, bool is_write,
- double elapsed_time, uint64_t *wait);
-static bool bdrv_exceed_io_limits(BlockDriverState *bs, int nb_sectors,
- bool is_write, int64_t *wait);
-
static QTAILQ_HEAD(, BlockDriverState) bdrv_states =
QTAILQ_HEAD_INITIALIZER(bdrv_states);
@@ -123,70 +116,110 @@ int is_windows_drive(const char *filename)
#endif
/* throttling disk I/O limits */
-void bdrv_io_limits_disable(BlockDriverState *bs)
+void bdrv_set_io_limits(BlockDriverState *bs,
+ ThrottleConfig *cfg)
{
- bs->io_limits_enabled = false;
+ int i;
+
+ throttle_config(&bs->throttle_state, cfg);
+
+ for (i = 0; i < 2; i++) {
+ qemu_co_enter_next(&bs->throttled_reqs[i]);
+ }
+}
+
+/* this function drain all the throttled IOs */
+static bool bdrv_drain_throttled(BlockDriverState *bs)
+{
+ bool drained = false;
+ bool enabled = bs->io_limits_enabled;
+ int i;
- do {} while (qemu_co_enter_next(&bs->throttled_reqs));
+ bs->io_limits_enabled = false;
- if (bs->block_timer) {
- qemu_del_timer(bs->block_timer);
- qemu_free_timer(bs->block_timer);
- bs->block_timer = NULL;
+ for (i = 0; i < 2; i++) {
+ while (qemu_co_enter_next(&bs->throttled_reqs[i])) {
+ drained = true;
+ }
}
- bs->slice_start = 0;
- bs->slice_end = 0;
+ bs->io_limits_enabled = enabled;
+
+ return drained;
}
-static void bdrv_block_timer(void *opaque)
+void bdrv_io_limits_disable(BlockDriverState *bs)
+{
+ bs->io_limits_enabled = false;
+
+ bdrv_drain_throttled(bs);
+
+ throttle_destroy(&bs->throttle_state);
+}
+
+static void bdrv_throttle_read_timer_cb(void *opaque)
{
BlockDriverState *bs = opaque;
+ qemu_co_enter_next(&bs->throttled_reqs[0]);
+}
- qemu_co_enter_next(&bs->throttled_reqs);
+static void bdrv_throttle_write_timer_cb(void *opaque)
+{
+ BlockDriverState *bs = opaque;
+ qemu_co_enter_next(&bs->throttled_reqs[1]);
}
+/* should be called before bdrv_set_io_limits if a limit is set */
void bdrv_io_limits_enable(BlockDriverState *bs)
{
- qemu_co_queue_init(&bs->throttled_reqs);
- bs->block_timer = qemu_new_timer_ns(vm_clock, bdrv_block_timer, bs);
+ throttle_init(&bs->throttle_state,
+ vm_clock,
+ bdrv_throttle_read_timer_cb,
+ bdrv_throttle_write_timer_cb,
+ bs);
+ qemu_co_queue_init(&bs->throttled_reqs[0]);
+ qemu_co_queue_init(&bs->throttled_reqs[1]);
bs->io_limits_enabled = true;
}
-bool bdrv_io_limits_enabled(BlockDriverState *bs)
+/* This function make an IO wait if needed
+ *
+ * @is_write: is the IO a write
+ * @nb_sectors: the number of sectors of the IO
+ */
+static void bdrv_io_limits_intercept(BlockDriverState *bs,
+ bool is_write,
+ int nb_sectors)
{
- BlockIOLimit *io_limits = &bs->io_limits;
- return io_limits->bps[BLOCK_IO_LIMIT_READ]
- || io_limits->bps[BLOCK_IO_LIMIT_WRITE]
- || io_limits->bps[BLOCK_IO_LIMIT_TOTAL]
- || io_limits->iops[BLOCK_IO_LIMIT_READ]
- || io_limits->iops[BLOCK_IO_LIMIT_WRITE]
- || io_limits->iops[BLOCK_IO_LIMIT_TOTAL];
+ /* does this io must wait */
+ bool must_wait = !throttle_allowed(&bs->throttle_state, is_write);
+
+ /* if must wait or any request of this type throttled queue the IO */
+ if (must_wait ||
+ !qemu_co_queue_empty(&bs->throttled_reqs[is_write])) {
+ qemu_co_queue_wait(&bs->throttled_reqs[is_write]);
+ }
+
+ /* the IO will be executed do the accounting */
+ throttle_account(&bs->throttle_state, is_write, nb_sectors);
}
-static void bdrv_io_limits_intercept(BlockDriverState *bs,
- bool is_write, int nb_sectors)
+/* This function will schedule the next IO throttled IO of this type if needed
+ *
+ * @is_write: is the IO a write
+ */
+static void bdrv_io_limits_resched(BlockDriverState *bs, bool is_write)
{
- int64_t wait_time = -1;
- if (!qemu_co_queue_empty(&bs->throttled_reqs)) {
- qemu_co_queue_wait(&bs->throttled_reqs);
+ if (qemu_co_queue_empty(&bs->throttled_reqs[is_write])) {
+ return;
}
- /* In fact, we hope to keep each request's timing, in FIFO mode. The next
- * throttled requests will not be dequeued until the current request is
- * allowed to be serviced. So if the current request still exceeds the
- * limits, it will be inserted to the head. All requests followed it will
- * be still in throttled_reqs queue.
- */
-
- while (bdrv_exceed_io_limits(bs, nb_sectors, is_write, &wait_time)) {
- qemu_mod_timer(bs->block_timer,
- wait_time + qemu_get_clock_ns(vm_clock));
- qemu_co_queue_wait_insert_head(&bs->throttled_reqs);
+ if (!throttle_allowed(&bs->throttle_state, is_write)) {
+ return;
}
- qemu_co_queue_next(&bs->throttled_reqs);
+ qemu_co_queue_next(&bs->throttled_reqs[is_write]);
}
/* check if the path starts with "<protocol>:" */
@@ -1112,11 +1145,6 @@ int bdrv_open(BlockDriverState *bs, const char *filename, QDict *options,
bdrv_dev_change_media_cb(bs, true);
}
- /* throttling disk I/O limits */
- if (bs->io_limits_enabled) {
- bdrv_io_limits_enable(bs);
- }
-
return 0;
unlink_and_fail:
@@ -1452,16 +1480,15 @@ void bdrv_drain_all(void)
* a busy wait.
*/
QTAILQ_FOREACH(bs, &bdrv_states, list) {
- while (qemu_co_enter_next(&bs->throttled_reqs)) {
- busy = true;
- }
+ busy = bdrv_drain_throttled(bs);
}
} while (busy);
/* If requests are still pending there is a bug somewhere */
QTAILQ_FOREACH(bs, &bdrv_states, list) {
assert(QLIST_EMPTY(&bs->tracked_requests));
- assert(qemu_co_queue_empty(&bs->throttled_reqs));
+ assert(qemu_co_queue_empty(&bs->throttled_reqs[0]));
+ assert(qemu_co_queue_empty(&bs->throttled_reqs[1]));
}
}
@@ -1497,13 +1524,12 @@ static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
bs_dest->enable_write_cache = bs_src->enable_write_cache;
- /* i/o timing parameters */
- bs_dest->slice_start = bs_src->slice_start;
- bs_dest->slice_end = bs_src->slice_end;
- bs_dest->slice_submitted = bs_src->slice_submitted;
- bs_dest->io_limits = bs_src->io_limits;
- bs_dest->throttled_reqs = bs_src->throttled_reqs;
- bs_dest->block_timer = bs_src->block_timer;
+ /* i/o throttled req */
+ memcpy(&bs_dest->throttle_state,
+ &bs_src->throttle_state,
+ sizeof(ThrottleState));
+ bs_dest->throttled_reqs[0] = bs_src->throttled_reqs[0];
+ bs_dest->throttled_reqs[1] = bs_src->throttled_reqs[1];
bs_dest->io_limits_enabled = bs_src->io_limits_enabled;
/* r/w error */
@@ -1550,7 +1576,7 @@ void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
assert(bs_new->dev == NULL);
assert(bs_new->in_use == 0);
assert(bs_new->io_limits_enabled == false);
- assert(bs_new->block_timer == NULL);
+ assert(!throttle_have_timer(&bs_new->throttle_state));
tmp = *bs_new;
*bs_new = *bs_old;
@@ -1569,7 +1595,7 @@ void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
assert(bs_new->job == NULL);
assert(bs_new->in_use == 0);
assert(bs_new->io_limits_enabled == false);
- assert(bs_new->block_timer == NULL);
+ assert(!throttle_have_timer(&bs_new->throttle_state));
bdrv_rebind(bs_new);
bdrv_rebind(bs_old);
@@ -1860,8 +1886,15 @@ int bdrv_commit_all(void)
*
* This function should be called when a tracked request is completing.
*/
-static void tracked_request_end(BdrvTrackedRequest *req)
+static void tracked_request_end(BlockDriverState *bs,
+ BdrvTrackedRequest *req,
+ bool is_write)
{
+ /* throttling disk I/O */
+ if (bs->io_limits_enabled) {
+ bdrv_io_limits_resched(bs, is_write);
+ }
+
QLIST_REMOVE(req, list);
qemu_co_queue_restart_all(&req->wait_queue);
}
@@ -1874,6 +1907,11 @@ static void tracked_request_begin(BdrvTrackedRequest *req,
int64_t sector_num,
int nb_sectors, bool is_write)
{
+ /* throttling disk I/O */
+ if (bs->io_limits_enabled) {
+ bdrv_io_limits_intercept(bs, is_write, nb_sectors);
+ }
+
*req = (BdrvTrackedRequest){
.bs = bs,
.sector_num = sector_num,
@@ -2512,11 +2550,6 @@ static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
return -EIO;
}
- /* throttling disk read I/O */
- if (bs->io_limits_enabled) {
- bdrv_io_limits_intercept(bs, false, nb_sectors);
- }
-
if (bs->copy_on_read) {
flags |= BDRV_REQ_COPY_ON_READ;
}
@@ -2547,7 +2580,7 @@ static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
out:
- tracked_request_end(&req);
+ tracked_request_end(bs, &req, false);
if (flags & BDRV_REQ_COPY_ON_READ) {
bs->copy_on_read_in_flight--;
@@ -2625,11 +2658,6 @@ static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
return -EIO;
}
- /* throttling disk write I/O */
- if (bs->io_limits_enabled) {
- bdrv_io_limits_intercept(bs, true, nb_sectors);
- }
-
if (bs->copy_on_read_in_flight) {
wait_for_overlapping_requests(bs, sector_num, nb_sectors);
}
@@ -2658,7 +2686,7 @@ static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
bs->wr_highest_sector = sector_num + nb_sectors - 1;
}
- tracked_request_end(&req);
+ tracked_request_end(bs, &req, true);
return ret;
}
@@ -2751,14 +2779,6 @@ void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr)
*nb_sectors_ptr = length;
}
-/* throttling disk io limits */
-void bdrv_set_io_limits(BlockDriverState *bs,
- BlockIOLimit *io_limits)
-{
- bs->io_limits = *io_limits;
- bs->io_limits_enabled = bdrv_io_limits_enabled(bs);
-}
-
void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error,
BlockdevOnError on_write_error)
{
@@ -3568,169 +3588,6 @@ void bdrv_aio_cancel(BlockDriverAIOCB *acb)
acb->aiocb_info->cancel(acb);
}
-/* block I/O throttling */
-static bool bdrv_exceed_bps_limits(BlockDriverState *bs, int nb_sectors,
- bool is_write, double elapsed_time, uint64_t *wait)
-{
- uint64_t bps_limit = 0;
- uint64_t extension;
- double bytes_limit, bytes_base, bytes_res;
- double slice_time, wait_time;
-
- if (bs->io_limits.bps[BLOCK_IO_LIMIT_TOTAL]) {
- bps_limit = bs->io_limits.bps[BLOCK_IO_LIMIT_TOTAL];
- } else if (bs->io_limits.bps[is_write]) {
- bps_limit = bs->io_limits.bps[is_write];
- } else {
- if (wait) {
- *wait = 0;
- }
-
- return false;
- }
-
- slice_time = bs->slice_end - bs->slice_start;
- slice_time /= (NANOSECONDS_PER_SECOND);
- bytes_limit = bps_limit * slice_time;
- bytes_base = bs->slice_submitted.bytes[is_write];
- if (bs->io_limits.bps[BLOCK_IO_LIMIT_TOTAL]) {
- bytes_base += bs->slice_submitted.bytes[!is_write];
- }
-
- /* bytes_base: the bytes of data which have been read/written; and
- * it is obtained from the history statistic info.
- * bytes_res: the remaining bytes of data which need to be read/written.
- * (bytes_base + bytes_res) / bps_limit: used to calcuate
- * the total time for completing reading/writting all data.
- */
- bytes_res = (unsigned) nb_sectors * BDRV_SECTOR_SIZE;
-
- if (bytes_base + bytes_res <= bytes_limit) {
- if (wait) {
- *wait = 0;
- }
-
- return false;
- }
-
- /* Calc approx time to dispatch */
- wait_time = (bytes_base + bytes_res) / bps_limit - elapsed_time;
-
- /* When the I/O rate at runtime exceeds the limits,
- * bs->slice_end need to be extended in order that the current statistic
- * info can be kept until the timer fire, so it is increased and tuned
- * based on the result of experiment.
- */
- extension = wait_time * NANOSECONDS_PER_SECOND;
- extension = DIV_ROUND_UP(extension, BLOCK_IO_SLICE_TIME) *
- BLOCK_IO_SLICE_TIME;
- bs->slice_end += extension;
- if (wait) {
- *wait = wait_time * NANOSECONDS_PER_SECOND;
- }
-
- return true;
-}
-
-static bool bdrv_exceed_iops_limits(BlockDriverState *bs, bool is_write,
- double elapsed_time, uint64_t *wait)
-{
- uint64_t iops_limit = 0;
- double ios_limit, ios_base;
- double slice_time, wait_time;
-
- if (bs->io_limits.iops[BLOCK_IO_LIMIT_TOTAL]) {
- iops_limit = bs->io_limits.iops[BLOCK_IO_LIMIT_TOTAL];
- } else if (bs->io_limits.iops[is_write]) {
- iops_limit = bs->io_limits.iops[is_write];
- } else {
- if (wait) {
- *wait = 0;
- }
-
- return false;
- }
-
- slice_time = bs->slice_end - bs->slice_start;
- slice_time /= (NANOSECONDS_PER_SECOND);
- ios_limit = iops_limit * slice_time;
- ios_base = bs->slice_submitted.ios[is_write];
- if (bs->io_limits.iops[BLOCK_IO_LIMIT_TOTAL]) {
- ios_base += bs->slice_submitted.ios[!is_write];
- }
-
- if (ios_base + 1 <= ios_limit) {
- if (wait) {
- *wait = 0;
- }
-
- return false;
- }
-
- /* Calc approx time to dispatch, in seconds */
- wait_time = (ios_base + 1) / iops_limit;
- if (wait_time > elapsed_time) {
- wait_time = wait_time - elapsed_time;
- } else {
- wait_time = 0;
- }
-
- /* Exceeded current slice, extend it by another slice time */
- bs->slice_end += BLOCK_IO_SLICE_TIME;
- if (wait) {
- *wait = wait_time * NANOSECONDS_PER_SECOND;
- }
-
- return true;
-}
-
-static bool bdrv_exceed_io_limits(BlockDriverState *bs, int nb_sectors,
- bool is_write, int64_t *wait)
-{
- int64_t now, max_wait;
- uint64_t bps_wait = 0, iops_wait = 0;
- double elapsed_time;
- int bps_ret, iops_ret;
-
- now = qemu_get_clock_ns(vm_clock);
- if (now > bs->slice_end) {
- bs->slice_start = now;
- bs->slice_end = now + BLOCK_IO_SLICE_TIME;
- memset(&bs->slice_submitted, 0, sizeof(bs->slice_submitted));
- }
-
- elapsed_time = now - bs->slice_start;
- elapsed_time /= (NANOSECONDS_PER_SECOND);
-
- bps_ret = bdrv_exceed_bps_limits(bs, nb_sectors,
- is_write, elapsed_time, &bps_wait);
- iops_ret = bdrv_exceed_iops_limits(bs, is_write,
- elapsed_time, &iops_wait);
- if (bps_ret || iops_ret) {
- max_wait = bps_wait > iops_wait ? bps_wait : iops_wait;
- if (wait) {
- *wait = max_wait;
- }
-
- now = qemu_get_clock_ns(vm_clock);
- if (bs->slice_end < now + max_wait) {
- bs->slice_end = now + max_wait;
- }
-
- return true;
- }
-
- if (wait) {
- *wait = 0;
- }
-
- bs->slice_submitted.bytes[is_write] += (int64_t)nb_sectors *
- BDRV_SECTOR_SIZE;
- bs->slice_submitted.ios[is_write]++;
-
- return false;
-}
-
/**************************************************************/
/* async block device emulation */
@@ -223,18 +223,15 @@ void bdrv_query_info(BlockDriverState *bs,
info->inserted->backing_file_depth = bdrv_get_backing_file_depth(bs);
if (bs->io_limits_enabled) {
- info->inserted->bps =
- bs->io_limits.bps[BLOCK_IO_LIMIT_TOTAL];
- info->inserted->bps_rd =
- bs->io_limits.bps[BLOCK_IO_LIMIT_READ];
- info->inserted->bps_wr =
- bs->io_limits.bps[BLOCK_IO_LIMIT_WRITE];
- info->inserted->iops =
- bs->io_limits.iops[BLOCK_IO_LIMIT_TOTAL];
- info->inserted->iops_rd =
- bs->io_limits.iops[BLOCK_IO_LIMIT_READ];
- info->inserted->iops_wr =
- bs->io_limits.iops[BLOCK_IO_LIMIT_WRITE];
+ ThrottleConfig cfg;
+ throttle_get_config(&bs->throttle_state, &cfg);
+ info->inserted->bps = cfg.buckets[THROTTLE_BPS_TOTAL].ups;
+ info->inserted->bps_rd = cfg.buckets[THROTTLE_BPS_READ].ups;
+ info->inserted->bps_wr = cfg.buckets[THROTTLE_BPS_WRITE].ups;
+
+ info->inserted->iops = cfg.buckets[THROTTLE_OPS_TOTAL].ups;
+ info->inserted->iops_rd = cfg.buckets[THROTTLE_OPS_READ].ups;
+ info->inserted->iops_wr = cfg.buckets[THROTTLE_OPS_WRITE].ups;
}
bs0 = bs;
@@ -281,32 +281,16 @@ static int parse_block_error_action(const char *buf, bool is_read)
}
}
-static bool do_check_io_limits(BlockIOLimit *io_limits, Error **errp)
+static bool check_throttle_config(ThrottleConfig *cfg, Error **errp)
{
- bool bps_flag;
- bool iops_flag;
-
- assert(io_limits);
-
- bps_flag = (io_limits->bps[BLOCK_IO_LIMIT_TOTAL] != 0)
- && ((io_limits->bps[BLOCK_IO_LIMIT_READ] != 0)
- || (io_limits->bps[BLOCK_IO_LIMIT_WRITE] != 0));
- iops_flag = (io_limits->iops[BLOCK_IO_LIMIT_TOTAL] != 0)
- && ((io_limits->iops[BLOCK_IO_LIMIT_READ] != 0)
- || (io_limits->iops[BLOCK_IO_LIMIT_WRITE] != 0));
- if (bps_flag || iops_flag) {
- error_setg(errp, "bps(iops) and bps_rd/bps_wr(iops_rd/iops_wr) "
+ if (throttle_conflicting(cfg)) {
+ error_setg(errp, "bps/iops/max total values and read/write values"
"cannot be used at the same time");
return false;
}
- if (io_limits->bps[BLOCK_IO_LIMIT_TOTAL] < 0 ||
- io_limits->bps[BLOCK_IO_LIMIT_WRITE] < 0 ||
- io_limits->bps[BLOCK_IO_LIMIT_READ] < 0 ||
- io_limits->iops[BLOCK_IO_LIMIT_TOTAL] < 0 ||
- io_limits->iops[BLOCK_IO_LIMIT_WRITE] < 0 ||
- io_limits->iops[BLOCK_IO_LIMIT_READ] < 0) {
- error_setg(errp, "bps and iops values must be 0 or greater");
+ if (!throttle_is_valid(cfg)) {
+ error_setg(errp, "bps/iops/maxs values must be 0 or greater");
return false;
}
@@ -331,7 +315,7 @@ static DriveInfo *blockdev_init(QemuOpts *all_opts,
int on_read_error, on_write_error;
const char *devaddr;
DriveInfo *dinfo;
- BlockIOLimit io_limits;
+ ThrottleConfig cfg;
int snapshot = 0;
bool copy_on_read;
int ret;
@@ -489,20 +473,31 @@ static DriveInfo *blockdev_init(QemuOpts *all_opts,
}
/* disk I/O throttling */
- io_limits.bps[BLOCK_IO_LIMIT_TOTAL] =
+ cfg.buckets[THROTTLE_BPS_TOTAL].ups =
qemu_opt_get_number(opts, "throttling.bps-total", 0);
- io_limits.bps[BLOCK_IO_LIMIT_READ] =
+ cfg.buckets[THROTTLE_BPS_READ].ups =
qemu_opt_get_number(opts, "throttling.bps-read", 0);
- io_limits.bps[BLOCK_IO_LIMIT_WRITE] =
+ cfg.buckets[THROTTLE_BPS_WRITE].ups =
qemu_opt_get_number(opts, "throttling.bps-write", 0);
- io_limits.iops[BLOCK_IO_LIMIT_TOTAL] =
+ cfg.buckets[THROTTLE_OPS_TOTAL].ups =
qemu_opt_get_number(opts, "throttling.iops-total", 0);
- io_limits.iops[BLOCK_IO_LIMIT_READ] =
+ cfg.buckets[THROTTLE_OPS_READ].ups =
qemu_opt_get_number(opts, "throttling.iops-read", 0);
- io_limits.iops[BLOCK_IO_LIMIT_WRITE] =
+ cfg.buckets[THROTTLE_OPS_WRITE].ups =
qemu_opt_get_number(opts, "throttling.iops-write", 0);
- if (!do_check_io_limits(&io_limits, &error)) {
+ cfg.buckets[THROTTLE_BPS_TOTAL].max = 0;
+ cfg.buckets[THROTTLE_BPS_READ].max = 0;
+ cfg.buckets[THROTTLE_BPS_WRITE].max = 0;
+
+ cfg.buckets[THROTTLE_OPS_TOTAL].max = 0;
+ cfg.buckets[THROTTLE_OPS_READ].max = 0;
+ cfg.buckets[THROTTLE_OPS_WRITE].max = 0;
+
+ cfg.unit_size = BDRV_SECTOR_SIZE;
+ cfg.op_size = 0;
+
+ if (!check_throttle_config(&cfg, &error)) {
error_report("%s", error_get_pretty(error));
error_free(error);
return NULL;
@@ -629,7 +624,10 @@ static DriveInfo *blockdev_init(QemuOpts *all_opts,
bdrv_set_on_error(dinfo->bdrv, on_read_error, on_write_error);
/* disk I/O throttling */
- bdrv_set_io_limits(dinfo->bdrv, &io_limits);
+ if (throttle_enabled(&cfg)) {
+ bdrv_io_limits_enable(dinfo->bdrv);
+ bdrv_set_io_limits(dinfo->bdrv, &cfg);
+ }
switch(type) {
case IF_IDE:
@@ -1262,7 +1260,7 @@ void qmp_block_set_io_throttle(const char *device, int64_t bps, int64_t bps_rd,
int64_t bps_wr, int64_t iops, int64_t iops_rd,
int64_t iops_wr, Error **errp)
{
- BlockIOLimit io_limits;
+ ThrottleConfig cfg;
BlockDriverState *bs;
bs = bdrv_find(device);
@@ -1271,27 +1269,37 @@ void qmp_block_set_io_throttle(const char *device, int64_t bps, int64_t bps_rd,
return;
}
- io_limits.bps[BLOCK_IO_LIMIT_TOTAL] = bps;
- io_limits.bps[BLOCK_IO_LIMIT_READ] = bps_rd;
- io_limits.bps[BLOCK_IO_LIMIT_WRITE] = bps_wr;
- io_limits.iops[BLOCK_IO_LIMIT_TOTAL]= iops;
- io_limits.iops[BLOCK_IO_LIMIT_READ] = iops_rd;
- io_limits.iops[BLOCK_IO_LIMIT_WRITE]= iops_wr;
+ cfg.buckets[THROTTLE_BPS_TOTAL].ups = bps;
+ cfg.buckets[THROTTLE_BPS_READ].ups = bps_rd;
+ cfg.buckets[THROTTLE_BPS_WRITE].ups = bps_wr;
+
+ cfg.buckets[THROTTLE_OPS_TOTAL].ups = iops;
+ cfg.buckets[THROTTLE_OPS_READ].ups = iops_rd;
+ cfg.buckets[THROTTLE_OPS_WRITE].ups = iops_wr;
+
+ cfg.buckets[THROTTLE_BPS_TOTAL].max = 0;
+ cfg.buckets[THROTTLE_BPS_READ].max = 0;
+ cfg.buckets[THROTTLE_BPS_WRITE].max = 0;
+
+ cfg.buckets[THROTTLE_OPS_TOTAL].max = 0;
+ cfg.buckets[THROTTLE_OPS_READ].max = 0;
+ cfg.buckets[THROTTLE_OPS_WRITE].max = 0;
- if (!do_check_io_limits(&io_limits, errp)) {
+ cfg.unit_size = BDRV_SECTOR_SIZE;
+ cfg.op_size = 0;
+
+ if (!check_throttle_config(&cfg, errp)) {
return;
}
- bs->io_limits = io_limits;
-
- if (!bs->io_limits_enabled && bdrv_io_limits_enabled(bs)) {
+ if (!bs->io_limits_enabled && throttle_enabled(&cfg)) {
bdrv_io_limits_enable(bs);
- } else if (bs->io_limits_enabled && !bdrv_io_limits_enabled(bs)) {
+ } else if (bs->io_limits_enabled && !throttle_enabled(&cfg)) {
bdrv_io_limits_disable(bs);
- } else {
- if (bs->block_timer) {
- qemu_mod_timer(bs->block_timer, qemu_get_clock_ns(vm_clock));
- }
+ }
+
+ if (bs->io_limits_enabled) {
+ bdrv_set_io_limits(bs, &cfg);
}
}
@@ -107,7 +107,6 @@ void bdrv_info_stats(Monitor *mon, QObject **ret_data);
/* disk I/O throttling */
void bdrv_io_limits_enable(BlockDriverState *bs);
void bdrv_io_limits_disable(BlockDriverState *bs);
-bool bdrv_io_limits_enabled(BlockDriverState *bs);
void bdrv_init(void);
void bdrv_init_with_whitelist(void);
@@ -34,18 +34,12 @@
#include "monitor/monitor.h"
#include "qemu/hbitmap.h"
#include "block/snapshot.h"
+#include "qemu/throttle.h"
#define BLOCK_FLAG_ENCRYPT 1
#define BLOCK_FLAG_COMPAT6 4
#define BLOCK_FLAG_LAZY_REFCOUNTS 8
-#define BLOCK_IO_LIMIT_READ 0
-#define BLOCK_IO_LIMIT_WRITE 1
-#define BLOCK_IO_LIMIT_TOTAL 2
-
-#define BLOCK_IO_SLICE_TIME 100000000
-#define NANOSECONDS_PER_SECOND 1000000000.0
-
#define BLOCK_OPT_SIZE "size"
#define BLOCK_OPT_ENCRYPT "encryption"
#define BLOCK_OPT_COMPAT6 "compat6"
@@ -69,17 +63,6 @@ typedef struct BdrvTrackedRequest {
CoQueue wait_queue; /* coroutines blocked on this request */
} BdrvTrackedRequest;
-
-typedef struct BlockIOLimit {
- int64_t bps[3];
- int64_t iops[3];
-} BlockIOLimit;
-
-typedef struct BlockIOBaseValue {
- uint64_t bytes[2];
- uint64_t ios[2];
-} BlockIOBaseValue;
-
struct BlockDriver {
const char *format_name;
int instance_size;
@@ -263,13 +246,9 @@ struct BlockDriverState {
/* number of in-flight copy-on-read requests */
unsigned int copy_on_read_in_flight;
- /* the time for latest disk I/O */
- int64_t slice_start;
- int64_t slice_end;
- BlockIOLimit io_limits;
- BlockIOBaseValue slice_submitted;
- CoQueue throttled_reqs;
- QEMUTimer *block_timer;
+ /* I/O throttling */
+ ThrottleState throttle_state;
+ CoQueue throttled_reqs[2];
bool io_limits_enabled;
/* I/O stats (display with "info blockstats"). */
@@ -308,7 +287,8 @@ struct BlockDriverState {
int get_tmp_filename(char *filename, int size);
void bdrv_set_io_limits(BlockDriverState *bs,
- BlockIOLimit *io_limits);
+ ThrottleConfig *cfg);
+
/**
* bdrv_add_before_write_notifier:
tip: Do not ever use the cfg scheduler in the guest with this code. It gives incorrect throttling. Signed-off-by: Benoit Canet <benoit@irqsave.net> --- block.c | 351 ++++++++++++++------------------------------- block/qapi.c | 21 ++- blockdev.c | 100 +++++++------ include/block/block.h | 1 - include/block/block_int.h | 32 +---- 5 files changed, 173 insertions(+), 332 deletions(-)