diff mbox

[1,of,2] docs: fix typos in manpage

Message ID 62dedb0618a46bf0743f.1374042342@BEANTN0L019720
State Accepted
Commit 4e9c41579ebd
Headers show

Commit Message

Thomas De Schampheleire July 17, 2013, 6:25 a.m. UTC 
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>

---
 docs/ct-ng.1.in |  16 ++++++++--------
 1 files changed, 8 insertions(+), 8 deletions(-)


--
For unsubscribe information see http://sourceware.org/lists.html#faq

Comments

Yann E. MORIN July 24, 2013, 5:02 p.m. UTC | #1 
Thomas, All,

Your patch:
    docs: fix typos in manpage

has been applied as: #4e9c41579ebd
    http://crosstool-ng.org/hg/crosstool-ng/rev/4e9c41579ebd

Thank you!

Regards,
Yann E. MORIN.



--
For unsubscribe information see http://sourceware.org/lists.html#faq
diff mbox

Patch

diff --git a/docs/ct-ng.1.in b/docs/ct-ng.1.in
--- a/docs/ct-ng.1.in
+++ b/docs/ct-ng.1.in
@@ -22,7 +22,7 @@  Building a cross-toolchain can be a real
 .B crosstool-NG
 makes it easy to build cross-toolchains, and allows you to take all the juice
 out of your target by configuring the different components of the toolchain
-accordingly to the targeted processor.
+according to the targeted processor.
 ."
 ."
 .SH ACTIONS
@@ -62,10 +62,10 @@  with the target tuple they represent.
 .TP
 .B defconfig
 Save the current configuration to a mini-defconfig file, that contains only
-the strictly required symbols to reproduce the configuraiton. defconfig files
+the strictly required symbols to reproduce the configuration. defconfig files
 are much smaller than a complete .config, so it is easy to send by mail. As
 only non-default symbols are present in a defconfig, it easy to spot the
-meaningfull values. Also, it is easy to use defconfig files with newer
+meaningful values. Also, it is easy to use defconfig files with newer
 versions of
 .BR crosstool-NG .
 By default the mini-defconfig is saved to a file named
@@ -92,11 +92,11 @@  Configure
 .B crosstool-NG
 using a mini-defconfig file (previously saved with
 .B defconfig
-or manually edited). The default mini-defconfig is rad from the file
+or manually edited). The default mini-defconfig is read from the file
 .IR defconfig ,
-unless the vraiable
+unless the variable
 .B $DEFCONFIG
-is set, inwhich case the mini-defconfig will be read from the file referenced
+is set, in which case the mini-defconfig will be read from the file referenced
 by
 .B $DEFCONFIG
 ."
@@ -162,9 +162,9 @@  to have the meaning of the exit values.
 ."
 .SH BUGS
 As of today (@@CT_DATE@@), building tarballs is broken. It is difficult to
-foresee how every parts of
+foresee how all parts of
 .B crosstool-NG
-are going to be installed. Each parts is needed to build a tarball, as it
+are going to be installed. Each part is needed to build a tarball, as it
 contains all that is needed to rebuild the toolchain from scratch: toolchain
 components' sources,
 .B crosstool-NG