Message ID | 1374617276-26493-1-git-send-email-robert.winkler@boundarydevices.com |
---|---|
State | Awaiting Upstream |
Headers | show |
On Tue, Jul 23, 2013 at 7:07 PM, Robert Winkler <robert.winkler@boundarydevices.com> wrote: > --- a/arch/arm/imx-common/cmd_hdmidet.c > +++ b/arch/arm/imx-common/cmd_hdmidet.c > @@ -27,8 +27,7 @@ > static int do_hdmidet(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) > { > struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR; > - u8 reg = readb(&hdmi->phy_stat0) & HDMI_PHY_HPD; > - return (reg&HDMI_PHY_HPD) ? 0 : 1; > + return (readb(&hdmi->phy_stat0) & HDMI_DVI_STAT) ? 0 : 1; > } Does this depends on other boards to do similar commit in their kernel trees? -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://projetos.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
On Tue, Jul 23, 2013 at 3:33 PM, Otavio Salvador <otavio@ossystems.com.br>wrote: > On Tue, Jul 23, 2013 at 7:07 PM, Robert Winkler > <robert.winkler@boundarydevices.com> wrote: > > --- a/arch/arm/imx-common/cmd_hdmidet.c > > +++ b/arch/arm/imx-common/cmd_hdmidet.c > > @@ -27,8 +27,7 @@ > > static int do_hdmidet(cmd_tbl_t *cmdtp, int flag, int argc, char * > const argv[]) > > { > > struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR; > > - u8 reg = readb(&hdmi->phy_stat0) & HDMI_PHY_HPD; > > - return (reg&HDMI_PHY_HPD) ? 0 : 1; > > + return (readb(&hdmi->phy_stat0) & HDMI_DVI_STAT) ? 0 : 1; > > } > > Does this depends on other boards to do similar commit in their kernel > trees? > This change only affects people who enable and use the hdmidet command. This has nothing to do with the kernel. The kernel patch mentioned in the commit message just fixes the same problem for the kernel. Incidentally, I just grepped for CONFIG_CMD_HDMIDETECT and I don't see it documented anywhere. It should probably be added to the README > > -- > Otavio Salvador O.S. Systems > http://www.ossystems.com.br http://projetos.ossystems.com.br > Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 > Robert
On Tue, Jul 23, 2013 at 8:15 PM, Robert Winkler <robert.winkler@boundarydevices.com> wrote: > Incidentally, I just grepped for CONFIG_CMD_HDMIDETECT and I don't see it > documented anywhere. It should probably be added to the README Yes, looks like a good idea.
Hi Robert, On 24/07/2013 01:15, Robert Winkler wrote: > Incidentally, I just grepped for CONFIG_CMD_HDMIDETECT and I don't see > it documented anywhere. It should probably be added to the README Right - but let's do it in a separate patch. For this one: Acked-by: Stefano Babic <sbabic@denx.de> Regards, Stefano
Stefano, On Wed, Jul 24, 2013 at 4:09 AM, Stefano Babic <sbabic@denx.de> wrote: > Hi Robert, > > On 24/07/2013 01:15, Robert Winkler wrote: > > > Incidentally, I just grepped for CONFIG_CMD_HDMIDETECT and I don't see > > it documented anywhere. It should probably be added to the README > > Right - but let's do it in a separate patch. Both the bmode command and the hdmidet command are undocumented and both are imx specific. Bmode is used for imx6 and 53 currently so I know those are at least supported which is what Troy's original commit message said. Eric tells me that hdmidet is imx6 specific. So the documentation shuld probably go both in doc/README.imx5 and imx6 files? Here's a rough draft of what I'd actually say CONFIG_CMD_HDMIDETECT Add the 'hdmidet' command; returns true if an HDMI monitor is detected. CONFIG_CMD_BMODE Add the 'bmode' (bootmode) command for forcing a boot from other media. This is useful for forcing the ROM's usb downloader to activate upon a watchdog reset which is nice when iterating on U-Boot. Using the reset button or running bmode normal will set it back to normal > For this one: > > Acked-by: Stefano Babic <sbabic@denx.de> > > Regards, > Stefano > > -- > ===================================================================== > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de > ===================================================================== >
On Wed, Jul 24, 2013 at 4:59 PM, Robert Winkler <robert.winkler@boundarydevices.com> wrote: > Stefano, > > > On Wed, Jul 24, 2013 at 4:09 AM, Stefano Babic <sbabic@denx.de> wrote: >> >> Hi Robert, >> >> On 24/07/2013 01:15, Robert Winkler wrote: >> >> > Incidentally, I just grepped for CONFIG_CMD_HDMIDETECT and I don't see >> > it documented anywhere. It should probably be added to the README >> >> Right - but let's do it in a separate patch. > > > Both the bmode command and the hdmidet command are undocumented and both are > imx specific. Bmode is used for imx6 and 53 currently so I know those are > at least supported which is what Troy's original commit message said. > Eric tells me that hdmidet is imx6 specific. > > So the documentation shuld probably go both in doc/README.imx5 and imx6 > files? > > Here's a rough draft of what I'd actually say > > CONFIG_CMD_HDMIDETECT > Add the 'hdmidet' command; returns true if an HDMI monitor is detected. > > CONFIG_CMD_BMODE > Add the 'bmode' (bootmode) command for forcing a boot from other media. > This is useful for forcing the ROM's usb downloader to activate upon a > watchdog reset > which is nice when iterating on U-Boot. Using the reset button or running > bmode normal > will set it back to normal I think it should be together with commands and in the documentation you could say it is specific. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://projetos.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
On 24/07/2013 00:07, Robert Winkler wrote: > A little background is probably appropriate for this patch. > > Since "the beginning" of usage of the SABRE Lite and Nitrogen6x > boards, DVI detection has been somewhat broken. > > Some (most) DVI monitors don't produce the "HPD" bit in > the PHY_STAT0 register, but do show proper toggling of the > RX_SENSE0..3 bits. > > Creating a new the bit-mask to include all five bits and > modifying the 'hdmidet' command and internal detection > routines allows these monitors to function properly in U-Boot. > > A related patch to our kernels allows things to work under > Linux: > https://github.com/boundarydevices/linux-imx6/commit/7d8752905c118af9063738a533227de0b2f6ecd4 > > Signed-off-by: Robert Winkler <robert.winkler@boundarydevices.com> > --- Applied to u-boot-imx, thanks. Best regards, Stefano Babic
diff --git a/arch/arm/imx-common/cmd_hdmidet.c b/arch/arm/imx-common/cmd_hdmidet.c index 794bf50..ce0b26e 100644 --- a/arch/arm/imx-common/cmd_hdmidet.c +++ b/arch/arm/imx-common/cmd_hdmidet.c @@ -27,8 +27,7 @@ static int do_hdmidet(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR; - u8 reg = readb(&hdmi->phy_stat0) & HDMI_PHY_HPD; - return (reg&HDMI_PHY_HPD) ? 0 : 1; + return (readb(&hdmi->phy_stat0) & HDMI_DVI_STAT) ? 0 : 1; } U_BOOT_CMD(hdmidet, 1, 1, do_hdmidet, diff --git a/arch/arm/include/asm/arch-mx6/mxc_hdmi.h b/arch/arm/include/asm/arch-mx6/mxc_hdmi.h index 9dccb3f..1b55b05 100644 --- a/arch/arm/include/asm/arch-mx6/mxc_hdmi.h +++ b/arch/arm/include/asm/arch-mx6/mxc_hdmi.h @@ -896,6 +896,9 @@ enum { HDMI_PHY_HPD = 0x02, HDMI_PHY_TX_PHY_LOCK = 0x01, +/* Convenience macro RX_SENSE | HPD */ + HDMI_DVI_STAT = 0xF2, + /* PHY_I2CM_SLAVE_ADDR field values */ HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2 = 0x69, HDMI_PHY_I2CM_SLAVE_ADDR_HEAC_PHY = 0x49, diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 8f0f9b8..bb09a6a 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -477,7 +477,7 @@ struct display_info_t { static int detect_hdmi(struct display_info_t const *dev) { struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR; - return readb(&hdmi->phy_stat0) & HDMI_PHY_HPD; + return readb(&hdmi->phy_stat0) & HDMI_DVI_STAT; } static void enable_hdmi(struct display_info_t const *dev) diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index 862bc30..559b082 100644 --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c @@ -449,7 +449,7 @@ struct display_info_t { static int detect_hdmi(struct display_info_t const *dev) { struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR; - return readb(&hdmi->phy_stat0) & HDMI_PHY_HPD; + return readb(&hdmi->phy_stat0) & HDMI_DVI_STAT; } static void enable_hdmi(struct display_info_t const *dev)
A little background is probably appropriate for this patch. Since "the beginning" of usage of the SABRE Lite and Nitrogen6x boards, DVI detection has been somewhat broken. Some (most) DVI monitors don't produce the "HPD" bit in the PHY_STAT0 register, but do show proper toggling of the RX_SENSE0..3 bits. Creating a new the bit-mask to include all five bits and modifying the 'hdmidet' command and internal detection routines allows these monitors to function properly in U-Boot. A related patch to our kernels allows things to work under Linux: https://github.com/boundarydevices/linux-imx6/commit/7d8752905c118af9063738a533227de0b2f6ecd4 Signed-off-by: Robert Winkler <robert.winkler@boundarydevices.com> --- Change from v1: - Use Eric Nelson's description as commit message arch/arm/imx-common/cmd_hdmidet.c | 3 +-- arch/arm/include/asm/arch-mx6/mxc_hdmi.h | 3 +++ board/boundary/nitrogen6x/nitrogen6x.c | 2 +- board/freescale/mx6qsabrelite/mx6qsabrelite.c | 2 +- 4 files changed, 6 insertions(+), 4 deletions(-)