| Message ID | 1372152475-18617-6-git-send-email-josephl@nvidia.com |
|---|---|
| State | Superseded, archived |
| Headers | show |
On 06/25/2013 03:27 AM, Joseph Lo wrote: > When the last CPU core in suspend, the CPU power rail can be turned off > by setting flags to flow controller. Then the flow controller will inform > PMC to turn off the CPU rail when the last CPU goes into suspend. > diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c > + /* Turn off CRAIL */ > + if (tegra_chip_id == TEGRA114) { Presumably this new code is needed on Tegra114 and chips after it, so not needing it is the exception? If so, I'd suggest the following instead, so the code doesn't have to be modified for later chips: switch (tegra_chip_id) { case TEGRA20: case TEGRA30: break; default: the code you added break; } -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, 2013-06-27 at 03:36 +0800, Stephen Warren wrote: > On 06/25/2013 03:27 AM, Joseph Lo wrote: > > When the last CPU core in suspend, the CPU power rail can be turned off > > by setting flags to flow controller. Then the flow controller will inform > > PMC to turn off the CPU rail when the last CPU goes into suspend. > > > diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c > > > + /* Turn off CRAIL */ > > + if (tegra_chip_id == TEGRA114) { > > > Presumably this new code is needed on Tegra114 and chips after it, so > not needing it is the exception? If so, I'd suggest the following > instead, so the code doesn't have to be modified for later chips: > > switch (tegra_chip_id) { > case TEGRA20: > case TEGRA30: > break; > default: > the code you added > break; > } > Indeed. Good idea. Will fix. Thanks. -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-tegra/flowctrl.h b/arch/arm/mach-tegra/flowctrl.h index de0acb9..c89aac6 100644 --- a/arch/arm/mach-tegra/flowctrl.h +++ b/arch/arm/mach-tegra/flowctrl.h @@ -35,6 +35,11 @@ #define FLOW_CTRL_CPU0_CSR 0x8 #define FLOW_CTRL_CSR_INTR_FLAG (1 << 15) #define FLOW_CTRL_CSR_EVENT_FLAG (1 << 14) +#define FLOW_CTRL_CSR_ENABLE_EXT_CRAIL (1 << 13) +#define FLOW_CTRL_CSR_ENABLE_EXT_NCPU (1 << 12) +#define FLOW_CTRL_CSR_ENABLE_EXT_MASK ( \ + FLOW_CTRL_CSR_ENABLE_EXT_NCPU | \ + FLOW_CTRL_CSR_ENABLE_EXT_CRAIL) #define FLOW_CTRL_CSR_ENABLE (1 << 0) #define FLOW_CTRL_HALT_CPU1_EVENTS 0x14 #define FLOW_CTRL_CPU1_CSR 0x18 diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c index 32360e5..4c2958f 100644 --- a/arch/arm/mach-tegra/pmc.c +++ b/arch/arm/mach-tegra/pmc.c @@ -21,6 +21,7 @@ #include <linux/of.h> #include <linux/of_address.h> +#include "flowctrl.h" #include "fuse.h" #include "pm.h" #include "pmc.h" @@ -202,6 +203,15 @@ void tegra_pmc_pm_set(enum tegra_suspend_mode mode) reg |= TEGRA_POWER_CPU_PWRREQ_OE; reg &= ~TEGRA_POWER_EFFECT_LP0; + /* Turn off CRAIL */ + if (tegra_chip_id == TEGRA114) { + u32 fc_reg; + fc_reg = flowctrl_read_cpu_csr(0); + fc_reg &= ~FLOW_CTRL_CSR_ENABLE_EXT_MASK; + fc_reg |= FLOW_CTRL_CSR_ENABLE_EXT_CRAIL; + flowctrl_write_cpu_csr(0, fc_reg); + } + switch (mode) { case TEGRA_SUSPEND_LP2: rate = clk_get_rate(tegra_pclk);
When the last CPU core in suspend, the CPU power rail can be turned off by setting flags to flow controller. Then the flow controller will inform PMC to turn off the CPU rail when the last CPU goes into suspend. Signed-off-by: Joseph Lo <josephl@nvidia.com> --- arch/arm/mach-tegra/flowctrl.h | 5 +++++ arch/arm/mach-tegra/pmc.c | 10 ++++++++++ 2 files changed, 15 insertions(+)