Message ID | 51BE7032.9010802@samsung.com |
---|---|
State | Accepted |
Delegated to: | Albert ARIBAUD |
Headers | show |
On Mon, Jun 17, 2013 at 7:40 AM, Minkyu Kang <mk7.kang@samsung.com> wrote: > Dear Albert, > > The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98: > > at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200) > > are available in the git repository at: > > git://git.denx.de/u-boot-samsung master > > for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f: > > MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900) > > ---------------------------------------------------------------- > Akshay Saraswat (2): > Exynos5: clock: Update the equation to calculate PLL output frequency > Exynos: uart: s5p: enabling the uart tx/rx fifo > > Amar (9): > FDT: Add compatible string for DWMMC > EXYNOS5: FDT: Add DWMMC device node data > DWMMC: Initialise dwmci and resolve EMMC read write issues > EXYNOS5: DWMMC: Added FDT support for DWMMC > EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results. > SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT > MMC: APIs to support resize of EMMC boot partition > SMDK5250: Enable EMMC booting > COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition > > Arkadiusz Wlodarczyk (1): > arm:trats: change auto-booting to boot kernel with separate device tree blob > > Inderpal Singh (3): > exynos: move tzpc_init to armv7/exynos > exynos: update tzpc to make it common for exynos4 and exynos5 > exynos: Update origen and smdkv310 to use common tzpc_init > > Naveen Krishna Chatradhi (2): > power: exynos-tmu: fix warnings and clean up code > power: exynos-tmu: use the mux_addr bit fields in tmu_control register > > Rajeshwari Shinde (3): > SF: Add driver for Gigabyte device GD25LQ and GD25Q64B > SMDK5250: Enable SPI Gigabyte device. SPI gigabyte flash driver is not available in drivers/mtd/spi/ Am i missing anything here, please help. -- Thanks, Jagan. > MMC: DWMMC: Fix FIFO_DEPTH calculation > > arch/arm/cpu/armv7/exynos/Makefile | 2 +- > arch/arm/cpu/armv7/exynos/clock.c | 10 +- > .../arm/cpu/armv7/exynos/tzpc.c | 25 +- > arch/arm/cpu/armv7/s5p-common/Makefile | 2 + > arch/arm/dts/exynos5250.dtsi | 33 ++ > arch/arm/include/asm/arch-exynos/cpu.h | 4 + > arch/arm/include/asm/arch-exynos/dwmmc.h | 11 +- > arch/arm/include/asm/arch-exynos/tmu.h | 58 ++- > arch/arm/include/asm/arch-exynos/tzpc.h | 20 + > board/samsung/dts/exynos5250-smdk5250.dts | 24 ++ > board/samsung/origen/lowlevel_init.S | 44 +- > board/samsung/origen/origen_setup.h | 25 -- > board/samsung/smdk5250/Makefile | 5 +- > board/samsung/smdk5250/clock_init.c | 18 + > board/samsung/smdk5250/clock_init.h | 5 + > board/samsung/smdk5250/exynos5-dt.c | 423 ++++++++++++++++++++ > board/samsung/smdk5250/lowlevel_init.S | 2 + > board/samsung/smdk5250/setup.h | 25 -- > board/samsung/smdk5250/smdk5250.c | 223 +++-------- > board/samsung/smdk5250/spl_boot.c | 64 ++- > board/samsung/smdkv310/lowlevel_init.S | 60 +-- > common/cmd_mmc.c | 109 ++++- > doc/device-tree-bindings/exynos/dwmmc.txt | 54 +++ > drivers/mmc/dw_mmc.c | 27 +- > drivers/mmc/exynos_dw_mmc.c | 127 +++++- > drivers/mmc/mmc.c | 134 +++++++ > drivers/mtd/spi/Makefile | 1 + > drivers/mtd/spi/gigadevice.c | 81 ++++ > drivers/mtd/spi/spi_flash.c | 3 + > drivers/mtd/spi/spi_flash_internal.h | 1 + > drivers/power/exynos-tmu.c | 123 +++--- > drivers/serial/serial_s5p.c | 13 +- > drivers/video/exynos_fb.c | 4 +- > include/configs/exynos5250-dt.h | 11 +- > include/configs/origen.h | 2 + > include/configs/smdkv310.h | 2 + > include/configs/trats.h | 17 +- > include/dwmmc.h | 3 + > include/fdtdec.h | 1 + > include/mmc.h | 26 ++ > lib/fdtdec.c | 1 + > spl/Makefile | 4 + > 42 files changed, 1356 insertions(+), 471 deletions(-) > rename board/samsung/smdk5250/tzpc_init.c => arch/arm/cpu/armv7/exynos/tzpc.c (69%) > create mode 100644 board/samsung/smdk5250/exynos5-dt.c > create mode 100644 doc/device-tree-bindings/exynos/dwmmc.txt > create mode 100644 drivers/mtd/spi/gigadevice.c > -- > Thanks, > Minkyu Kang. > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot
Hi Minkyu, On Mon, 17 Jun 2013 13:16:20 +0530, Jagan Teki <jagannadh.teki@gmail.com> wrote: > On Mon, Jun 17, 2013 at 7:40 AM, Minkyu Kang <mk7.kang@samsung.com> wrote: > > Dear Albert, > > > > The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98: > > > > at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200) > > > > are available in the git repository at: > > > > git://git.denx.de/u-boot-samsung master > > > > for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f: > > > > MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900) > > > > ---------------------------------------------------------------- > > Akshay Saraswat (2): > > Exynos5: clock: Update the equation to calculate PLL output frequency > > Exynos: uart: s5p: enabling the uart tx/rx fifo > > > > Amar (9): > > FDT: Add compatible string for DWMMC > > EXYNOS5: FDT: Add DWMMC device node data > > DWMMC: Initialise dwmci and resolve EMMC read write issues > > EXYNOS5: DWMMC: Added FDT support for DWMMC > > EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results. > > SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT > > MMC: APIs to support resize of EMMC boot partition > > SMDK5250: Enable EMMC booting > > COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition > > > > Arkadiusz Wlodarczyk (1): > > arm:trats: change auto-booting to boot kernel with separate device tree blob > > > > Inderpal Singh (3): > > exynos: move tzpc_init to armv7/exynos > > exynos: update tzpc to make it common for exynos4 and exynos5 > > exynos: Update origen and smdkv310 to use common tzpc_init > > > > Naveen Krishna Chatradhi (2): > > power: exynos-tmu: fix warnings and clean up code > > power: exynos-tmu: use the mux_addr bit fields in tmu_control register > > > > Rajeshwari Shinde (3): > > SF: Add driver for Gigabyte device GD25LQ and GD25Q64B > > SMDK5250: Enable SPI Gigabyte device. > > SPI gigabyte flash driver is not available in drivers/mtd/spi/ > Am i missing anything here, please help. So, Minkyu, should I pick this PR or wait for an update? Amicalement,
On 18/06/13 23:57, Albert ARIBAUD wrote: > Hi Minkyu, > > On Mon, 17 Jun 2013 13:16:20 +0530, Jagan Teki > <jagannadh.teki@gmail.com> wrote: > >> On Mon, Jun 17, 2013 at 7:40 AM, Minkyu Kang <mk7.kang@samsung.com> wrote: >>> Dear Albert, >>> >>> The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98: >>> >>> at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200) >>> >>> are available in the git repository at: >>> >>> git://git.denx.de/u-boot-samsung master >>> >>> for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f: >>> >>> MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900) >>> >>> ---------------------------------------------------------------- >>> Akshay Saraswat (2): >>> Exynos5: clock: Update the equation to calculate PLL output frequency >>> Exynos: uart: s5p: enabling the uart tx/rx fifo >>> >>> Amar (9): >>> FDT: Add compatible string for DWMMC >>> EXYNOS5: FDT: Add DWMMC device node data >>> DWMMC: Initialise dwmci and resolve EMMC read write issues >>> EXYNOS5: DWMMC: Added FDT support for DWMMC >>> EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results. >>> SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT >>> MMC: APIs to support resize of EMMC boot partition >>> SMDK5250: Enable EMMC booting >>> COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition >>> >>> Arkadiusz Wlodarczyk (1): >>> arm:trats: change auto-booting to boot kernel with separate device tree blob >>> >>> Inderpal Singh (3): >>> exynos: move tzpc_init to armv7/exynos >>> exynos: update tzpc to make it common for exynos4 and exynos5 >>> exynos: Update origen and smdkv310 to use common tzpc_init >>> >>> Naveen Krishna Chatradhi (2): >>> power: exynos-tmu: fix warnings and clean up code >>> power: exynos-tmu: use the mux_addr bit fields in tmu_control register >>> >>> Rajeshwari Shinde (3): >>> SF: Add driver for Gigabyte device GD25LQ and GD25Q64B >>> SMDK5250: Enable SPI Gigabyte device. >> >> SPI gigabyte flash driver is not available in drivers/mtd/spi/ >> Am i missing anything here, please help. gigabyte flash driver is available in drivers/mtd/spi/ please refer below link. http://git.denx.de/?p=u-boot/u-boot-samsung.git;a=blob;f=drivers/mtd/spi/gigadevice.c; > > So, Minkyu, should I pick this PR or wait for an update? Please pick this PR. > > Amicalement, > Thanks, Minkyu Kang.
Hi Minkyu, On Mon, 17 Jun 2013 11:10:58 +0900, Minkyu Kang <mk7.kang@samsung.com> wrote: > Dear Albert, > > The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98: > > at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200) > > are available in the git repository at: > > git://git.denx.de/u-boot-samsung master > > for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f: > > MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900) I had three merge conflicts here, two solved automatically (files drivers/mmc/mmc.c and include/mmc.h) and one manually (spl/Makefile). I have pushed the resulting branch as mastercandidate. Please confirm that the resolutions are ok. Amicalement,
On Wed, Jun 19, 2013 at 6:09 AM, Minkyu Kang <mk7.kang@samsung.com> wrote: > On 18/06/13 23:57, Albert ARIBAUD wrote: >> Hi Minkyu, >> >> On Mon, 17 Jun 2013 13:16:20 +0530, Jagan Teki >> <jagannadh.teki@gmail.com> wrote: >> >>> On Mon, Jun 17, 2013 at 7:40 AM, Minkyu Kang <mk7.kang@samsung.com> wrote: >>>> Dear Albert, >>>> >>>> The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98: >>>> >>>> at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200) >>>> >>>> are available in the git repository at: >>>> >>>> git://git.denx.de/u-boot-samsung master >>>> >>>> for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f: >>>> >>>> MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900) >>>> >>>> ---------------------------------------------------------------- >>>> Akshay Saraswat (2): >>>> Exynos5: clock: Update the equation to calculate PLL output frequency >>>> Exynos: uart: s5p: enabling the uart tx/rx fifo >>>> >>>> Amar (9): >>>> FDT: Add compatible string for DWMMC >>>> EXYNOS5: FDT: Add DWMMC device node data >>>> DWMMC: Initialise dwmci and resolve EMMC read write issues >>>> EXYNOS5: DWMMC: Added FDT support for DWMMC >>>> EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results. >>>> SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT >>>> MMC: APIs to support resize of EMMC boot partition >>>> SMDK5250: Enable EMMC booting >>>> COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition >>>> >>>> Arkadiusz Wlodarczyk (1): >>>> arm:trats: change auto-booting to boot kernel with separate device tree blob >>>> >>>> Inderpal Singh (3): >>>> exynos: move tzpc_init to armv7/exynos >>>> exynos: update tzpc to make it common for exynos4 and exynos5 >>>> exynos: Update origen and smdkv310 to use common tzpc_init >>>> >>>> Naveen Krishna Chatradhi (2): >>>> power: exynos-tmu: fix warnings and clean up code >>>> power: exynos-tmu: use the mux_addr bit fields in tmu_control register >>>> >>>> Rajeshwari Shinde (3): >>>> SF: Add driver for Gigabyte device GD25LQ and GD25Q64B >>>> SMDK5250: Enable SPI Gigabyte device. >>> >>> SPI gigabyte flash driver is not available in drivers/mtd/spi/ >>> Am i missing anything here, please help. > > gigabyte flash driver is available in drivers/mtd/spi/ > please refer below link. > http://git.denx.de/?p=u-boot/u-boot-samsung.git;a=blob;f=drivers/mtd/spi/gigadevice.c; My question is the driver is not yet in main line, but patch " SMDK5250: Enable SPI Gigabyte device." is enabling the driver CONFIG_* into smdk5250 configuration entries. Is this valid, please correct me if am wrong. -- Thanks, Jagan. >> >> So, Minkyu, should I pick this PR or wait for an update? > > Please pick this PR. > >> >> Amicalement, >> > > Thanks, > Minkyu Kang.
Hi Jagan, On Wed, 19 Jun 2013 17:19:36 +0530, Jagan Teki <jagannadh.teki@gmail.com> wrote: > On Wed, Jun 19, 2013 at 6:09 AM, Minkyu Kang <mk7.kang@samsung.com> wrote: > > On 18/06/13 23:57, Albert ARIBAUD wrote: > >> Hi Minkyu, > >> > >> On Mon, 17 Jun 2013 13:16:20 +0530, Jagan Teki > >> <jagannadh.teki@gmail.com> wrote: > >> > >>> On Mon, Jun 17, 2013 at 7:40 AM, Minkyu Kang <mk7.kang@samsung.com> wrote: > >>>> Dear Albert, > >>>> > >>>> The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98: > >>>> > >>>> at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200) > >>>> > >>>> are available in the git repository at: > >>>> > >>>> git://git.denx.de/u-boot-samsung master > >>>> > >>>> for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f: > >>>> > >>>> MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900) > >>>> > >>>> ---------------------------------------------------------------- > >>>> Akshay Saraswat (2): > >>>> Exynos5: clock: Update the equation to calculate PLL output frequency > >>>> Exynos: uart: s5p: enabling the uart tx/rx fifo > >>>> > >>>> Amar (9): > >>>> FDT: Add compatible string for DWMMC > >>>> EXYNOS5: FDT: Add DWMMC device node data > >>>> DWMMC: Initialise dwmci and resolve EMMC read write issues > >>>> EXYNOS5: DWMMC: Added FDT support for DWMMC > >>>> EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results. > >>>> SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT > >>>> MMC: APIs to support resize of EMMC boot partition > >>>> SMDK5250: Enable EMMC booting > >>>> COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition > >>>> > >>>> Arkadiusz Wlodarczyk (1): > >>>> arm:trats: change auto-booting to boot kernel with separate device tree blob > >>>> > >>>> Inderpal Singh (3): > >>>> exynos: move tzpc_init to armv7/exynos > >>>> exynos: update tzpc to make it common for exynos4 and exynos5 > >>>> exynos: Update origen and smdkv310 to use common tzpc_init > >>>> > >>>> Naveen Krishna Chatradhi (2): > >>>> power: exynos-tmu: fix warnings and clean up code > >>>> power: exynos-tmu: use the mux_addr bit fields in tmu_control register > >>>> > >>>> Rajeshwari Shinde (3): > >>>> SF: Add driver for Gigabyte device GD25LQ and GD25Q64B > >>>> SMDK5250: Enable SPI Gigabyte device. > >>> > >>> SPI gigabyte flash driver is not available in drivers/mtd/spi/ > >>> Am i missing anything here, please help. > > > > gigabyte flash driver is available in drivers/mtd/spi/ > > please refer below link. > > http://git.denx.de/?p=u-boot/u-boot-samsung.git;a=blob;f=drivers/mtd/spi/gigadevice.c; > > My question is the driver is not yet in main line, but patch > " SMDK5250: Enable SPI Gigabyte device." > is enabling the driver CONFIG_* into smdk5250 configuration entries. > > Is this valid, please correct me if am wrong. Doesn't patch "SMDK5250: Enable SPI Gigabyte device" immediately follow patch "SF: Add driver for Gigabyte device GD25LQ and GD25Q64B" which creates said device? > -- > Thanks, > Jagan. Amicalement,
On Wed, Jun 19, 2013 at 5:24 PM, Albert ARIBAUD <albert.u.boot@aribaud.net> wrote: > Hi Jagan, > > On Wed, 19 Jun 2013 17:19:36 +0530, Jagan Teki > <jagannadh.teki@gmail.com> wrote: > >> On Wed, Jun 19, 2013 at 6:09 AM, Minkyu Kang <mk7.kang@samsung.com> wrote: >> > On 18/06/13 23:57, Albert ARIBAUD wrote: >> >> Hi Minkyu, >> >> >> >> On Mon, 17 Jun 2013 13:16:20 +0530, Jagan Teki >> >> <jagannadh.teki@gmail.com> wrote: >> >> >> >>> On Mon, Jun 17, 2013 at 7:40 AM, Minkyu Kang <mk7.kang@samsung.com> wrote: >> >>>> Dear Albert, >> >>>> >> >>>> The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98: >> >>>> >> >>>> at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200) >> >>>> >> >>>> are available in the git repository at: >> >>>> >> >>>> git://git.denx.de/u-boot-samsung master >> >>>> >> >>>> for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f: >> >>>> >> >>>> MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900) >> >>>> >> >>>> ---------------------------------------------------------------- >> >>>> Akshay Saraswat (2): >> >>>> Exynos5: clock: Update the equation to calculate PLL output frequency >> >>>> Exynos: uart: s5p: enabling the uart tx/rx fifo >> >>>> >> >>>> Amar (9): >> >>>> FDT: Add compatible string for DWMMC >> >>>> EXYNOS5: FDT: Add DWMMC device node data >> >>>> DWMMC: Initialise dwmci and resolve EMMC read write issues >> >>>> EXYNOS5: DWMMC: Added FDT support for DWMMC >> >>>> EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results. >> >>>> SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT >> >>>> MMC: APIs to support resize of EMMC boot partition >> >>>> SMDK5250: Enable EMMC booting >> >>>> COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition >> >>>> >> >>>> Arkadiusz Wlodarczyk (1): >> >>>> arm:trats: change auto-booting to boot kernel with separate device tree blob >> >>>> >> >>>> Inderpal Singh (3): >> >>>> exynos: move tzpc_init to armv7/exynos >> >>>> exynos: update tzpc to make it common for exynos4 and exynos5 >> >>>> exynos: Update origen and smdkv310 to use common tzpc_init >> >>>> >> >>>> Naveen Krishna Chatradhi (2): >> >>>> power: exynos-tmu: fix warnings and clean up code >> >>>> power: exynos-tmu: use the mux_addr bit fields in tmu_control register >> >>>> >> >>>> Rajeshwari Shinde (3): >> >>>> SF: Add driver for Gigabyte device GD25LQ and GD25Q64B >> >>>> SMDK5250: Enable SPI Gigabyte device. >> >>> >> >>> SPI gigabyte flash driver is not available in drivers/mtd/spi/ >> >>> Am i missing anything here, please help. >> > >> > gigabyte flash driver is available in drivers/mtd/spi/ >> > please refer below link. >> > http://git.denx.de/?p=u-boot/u-boot-samsung.git;a=blob;f=drivers/mtd/spi/gigadevice.c; >> >> My question is the driver is not yet in main line, but patch >> " SMDK5250: Enable SPI Gigabyte device." >> is enabling the driver CONFIG_* into smdk5250 configuration entries. >> >> Is this valid, please correct me if am wrong. > > Doesn't patch "SMDK5250: Enable SPI Gigabyte device" immediately follow > patch "SF: Add driver for Gigabyte device GD25LQ and GD25Q64B" which > creates said device? OK I couldn't observer actual commit prefix for this gigabyte flash driver. May it could have sf: gigabyte: Any way please continue- -- Thanks, Jagan. > >> -- >> Thanks, >> Jagan. > > Amicalement, > -- > Albert.
On 19/06/13 20:30, Albert ARIBAUD wrote: > Hi Minkyu, > > On Mon, 17 Jun 2013 11:10:58 +0900, Minkyu Kang <mk7.kang@samsung.com> > wrote: > >> Dear Albert, >> >> The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98: >> >> at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200) >> >> are available in the git repository at: >> >> git://git.denx.de/u-boot-samsung master >> >> for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f: >> >> MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900) > > I had three merge conflicts here, two solved automatically (files > drivers/mmc/mmc.c and include/mmc.h) and one manually (spl/Makefile). > > I have pushed the resulting branch as mastercandidate. > > Please confirm that the resolutions are ok. It's good. confirmed. > > Amicalement, > Thanks, Minkyu Kang.
Hi Minkyu, On Mon, 17 Jun 2013 11:10:58 +0900, Minkyu Kang <mk7.kang@samsung.com> wrote: > Dear Albert, > > The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98: > > at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200) > > are available in the git repository at: > > git://git.denx.de/u-boot-samsung master > > for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f: > > MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900) > > ---------------------------------------------------------------- > Akshay Saraswat (2): > Exynos5: clock: Update the equation to calculate PLL output frequency > Exynos: uart: s5p: enabling the uart tx/rx fifo > > Amar (9): > FDT: Add compatible string for DWMMC > EXYNOS5: FDT: Add DWMMC device node data > DWMMC: Initialise dwmci and resolve EMMC read write issues > EXYNOS5: DWMMC: Added FDT support for DWMMC > EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results. > SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT > MMC: APIs to support resize of EMMC boot partition > SMDK5250: Enable EMMC booting > COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition > > Arkadiusz Wlodarczyk (1): > arm:trats: change auto-booting to boot kernel with separate device tree blob > > Inderpal Singh (3): > exynos: move tzpc_init to armv7/exynos > exynos: update tzpc to make it common for exynos4 and exynos5 > exynos: Update origen and smdkv310 to use common tzpc_init > > Naveen Krishna Chatradhi (2): > power: exynos-tmu: fix warnings and clean up code > power: exynos-tmu: use the mux_addr bit fields in tmu_control register > > Rajeshwari Shinde (3): > SF: Add driver for Gigabyte device GD25LQ and GD25Q64B > SMDK5250: Enable SPI Gigabyte device. > MMC: DWMMC: Fix FIFO_DEPTH calculation > > arch/arm/cpu/armv7/exynos/Makefile | 2 +- > arch/arm/cpu/armv7/exynos/clock.c | 10 +- > .../arm/cpu/armv7/exynos/tzpc.c | 25 +- > arch/arm/cpu/armv7/s5p-common/Makefile | 2 + > arch/arm/dts/exynos5250.dtsi | 33 ++ > arch/arm/include/asm/arch-exynos/cpu.h | 4 + > arch/arm/include/asm/arch-exynos/dwmmc.h | 11 +- > arch/arm/include/asm/arch-exynos/tmu.h | 58 ++- > arch/arm/include/asm/arch-exynos/tzpc.h | 20 + > board/samsung/dts/exynos5250-smdk5250.dts | 24 ++ > board/samsung/origen/lowlevel_init.S | 44 +- > board/samsung/origen/origen_setup.h | 25 -- > board/samsung/smdk5250/Makefile | 5 +- > board/samsung/smdk5250/clock_init.c | 18 + > board/samsung/smdk5250/clock_init.h | 5 + > board/samsung/smdk5250/exynos5-dt.c | 423 ++++++++++++++++++++ > board/samsung/smdk5250/lowlevel_init.S | 2 + > board/samsung/smdk5250/setup.h | 25 -- > board/samsung/smdk5250/smdk5250.c | 223 +++-------- > board/samsung/smdk5250/spl_boot.c | 64 ++- > board/samsung/smdkv310/lowlevel_init.S | 60 +-- > common/cmd_mmc.c | 109 ++++- > doc/device-tree-bindings/exynos/dwmmc.txt | 54 +++ > drivers/mmc/dw_mmc.c | 27 +- > drivers/mmc/exynos_dw_mmc.c | 127 +++++- > drivers/mmc/mmc.c | 134 +++++++ > drivers/mtd/spi/Makefile | 1 + > drivers/mtd/spi/gigadevice.c | 81 ++++ > drivers/mtd/spi/spi_flash.c | 3 + > drivers/mtd/spi/spi_flash_internal.h | 1 + > drivers/power/exynos-tmu.c | 123 +++--- > drivers/serial/serial_s5p.c | 13 +- > drivers/video/exynos_fb.c | 4 +- > include/configs/exynos5250-dt.h | 11 +- > include/configs/origen.h | 2 + > include/configs/smdkv310.h | 2 + > include/configs/trats.h | 17 +- > include/dwmmc.h | 3 + > include/fdtdec.h | 1 + > include/mmc.h | 26 ++ > lib/fdtdec.c | 1 + > spl/Makefile | 4 + > 42 files changed, 1356 insertions(+), 471 deletions(-) > rename board/samsung/smdk5250/tzpc_init.c => arch/arm/cpu/armv7/exynos/tzpc.c (69%) > create mode 100644 board/samsung/smdk5250/exynos5-dt.c > create mode 100644 doc/device-tree-bindings/exynos/dwmmc.txt > create mode 100644 drivers/mtd/spi/gigadevice.c Applied to u-boot-arm/master, thanks! Amicalement,