@@ -1046,9 +1046,9 @@ out:
*
* Determines physical layer capabilities of the current configuration.
**/
-static s32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
+static u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
{
- s32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
switch (hw->device_id) {
case IXGBE_DEV_ID_82598:
@@ -1111,8 +1111,11 @@ static struct ixgbe_mac_operations mac_ops_82598 = {
.clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic,
.get_media_type = &ixgbe_get_media_type_82598,
.get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82598,
+ .enable_rx_dma = &ixgbe_enable_rx_dma_generic,
.get_mac_addr = &ixgbe_get_mac_addr_generic,
.stop_adapter = &ixgbe_stop_adapter_generic,
+ .get_bus_info = &ixgbe_get_bus_info_generic,
+ .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie,
.read_analog_reg8 = &ixgbe_read_analog_reg8_82598,
.write_analog_reg8 = &ixgbe_write_analog_reg8_82598,
.setup_link = &ixgbe_setup_mac_link_82598,
new file mode 100644
@@ -0,0 +1,1277 @@
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+
+#include "ixgbe.h"
+#include "ixgbe_phy.h"
+
+#define IXGBE_82599_MAX_TX_QUEUES 128
+#define IXGBE_82599_MAX_RX_QUEUES 128
+#define IXGBE_82599_RAR_ENTRIES 128
+#define IXGBE_82599_MC_TBL_SIZE 128
+#define IXGBE_82599_VFT_TBL_SIZE 128
+
+s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg);
+enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw);
+s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw);
+s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed, bool autoneg,
+ bool autoneg_wait_to_complete);
+s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw);
+s32 ixgbe_check_mac_link_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *link_up, bool link_up_wait_to_complete);
+s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete);
+static s32 ixgbe_get_copper_link_capabilities_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg);
+static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw);
+static s32 ixgbe_setup_copper_link_speed_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete);
+s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw);
+s32 ixgbe_set_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
+s32 ixgbe_clear_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
+s32 ixgbe_set_vfta_82599(struct ixgbe_hw *hw, u32 vlan,
+ u32 vind, bool vlan_on);
+s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw);
+s32 ixgbe_blink_led_stop_82599(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_blink_led_start_82599(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_init_uta_tables_82599(struct ixgbe_hw *hw);
+s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val);
+s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val);
+s32 ixgbe_start_hw_rev_0_82599(struct ixgbe_hw *hw);
+s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw);
+s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw);
+u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw);
+
+void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+ if (hw->phy.multispeed_fiber) {
+ /* Set up dual speed SFP+ support */
+ mac->ops.setup_link =
+ &ixgbe_setup_mac_link_multispeed_fiber;
+ mac->ops.setup_link_speed =
+ &ixgbe_setup_mac_link_speed_multispeed_fiber;
+ } else {
+ mac->ops.setup_link =
+ &ixgbe_setup_mac_link_82599;
+ mac->ops.setup_link_speed =
+ &ixgbe_setup_mac_link_speed_82599;
+ }
+}
+
+s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 list_offset, data_offset, data_value;
+
+ if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) {
+ ixgbe_init_mac_link_ops_82599(hw);
+ ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
+ &data_offset);
+
+ if (ret_val != 0)
+ goto setup_sfp_out;
+
+ hw->eeprom.ops.read(hw, ++data_offset, &data_value);
+ while (data_value != 0xffff) {
+ IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value);
+ IXGBE_WRITE_FLUSH(hw);
+ hw->eeprom.ops.read(hw, ++data_offset, &data_value);
+ }
+ /* Now restart DSP */
+ IXGBE_WRITE_REG(hw, IXGBE_CORECTL, 0x00000102);
+ IXGBE_WRITE_REG(hw, IXGBE_CORECTL, 0x00000b1d);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+
+setup_sfp_out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_get_pcie_msix_count_82599 - Gets MSI-X vector count
+ * @hw: pointer to hardware structure
+ *
+ * Read PCIe configuration space, and get the MSI-X vector count from
+ * the capabilities table.
+ **/
+u32 ixgbe_get_pcie_msix_count_82599(struct ixgbe_hw *hw)
+{
+ struct ixgbe_adapter *adapter = hw->back;
+ u16 msix_count;
+ pci_read_config_word(adapter->pdev, IXGBE_PCIE_MSIX_82599_CAPS,
+ &msix_count);
+ msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK;
+
+ /* MSI-X count is zero-based in HW, so increment to give proper value */
+ msix_count++;
+
+ return msix_count;
+}
+
+static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+ struct ixgbe_phy_info *phy = &hw->phy;
+ s32 ret_val;
+
+ /* Set the bus information prior to PHY identification */
+ mac->ops.get_bus_info(hw);
+
+ /* Call PHY identify routine to get the Cu or SFI phy type */
+ ret_val = phy->ops.identify(hw);
+
+ if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ goto get_invariants_out;
+
+ ixgbe_init_mac_link_ops_82599(hw);
+
+ /* Setup SFP module if there is one present. */
+ ret_val = mac->ops.setup_sfp(hw);
+
+ /* If copper media, overwrite with copper function pointers */
+ if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
+ mac->ops.setup_link = &ixgbe_setup_copper_link_82599;
+ mac->ops.setup_link_speed =
+ &ixgbe_setup_copper_link_speed_82599;
+ mac->ops.get_link_capabilities =
+ &ixgbe_get_copper_link_capabilities_82599;
+ }
+
+ /* PHY Init */
+ switch (hw->phy.type) {
+ case ixgbe_phy_tn:
+ phy->ops.check_link = &ixgbe_check_phy_link_tnx;
+ phy->ops.get_firmware_version =
+ &ixgbe_get_phy_firmware_version_tnx;
+ break;
+ default:
+ break;
+ }
+
+ mac->mcft_size = IXGBE_82599_MC_TBL_SIZE;
+ mac->vft_size = IXGBE_82599_VFT_TBL_SIZE;
+ mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES;
+ mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES;
+ mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES;
+ mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82599(hw);
+
+get_invariants_out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_get_link_capabilities_82599 - Determines link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @negotiation: true when autoneg or autotry is enabled
+ *
+ * Determines the link capabilities by reading the AUTOC register.
+ **/
+s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *negotiation)
+{
+ s32 status = 0;
+
+ switch (hw->mac.orig_autoc & IXGBE_AUTOC_LMS_MASK) {
+ case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ *negotiation = false;
+ break;
+
+ case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ *negotiation = false;
+ break;
+
+ case IXGBE_AUTOC_LMS_1G_AN:
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ *negotiation = true;
+ break;
+
+ case IXGBE_AUTOC_LMS_10G_SERIAL:
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ *negotiation = false;
+ break;
+
+ case IXGBE_AUTOC_LMS_KX4_KX_KR:
+ case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN:
+ *speed = IXGBE_LINK_SPEED_UNKNOWN;
+ if (hw->mac.orig_autoc & IXGBE_AUTOC_KR_SUPP)
+ *speed |= IXGBE_LINK_SPEED_10GB_FULL;
+ if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP)
+ *speed |= IXGBE_LINK_SPEED_10GB_FULL;
+ if (hw->mac.orig_autoc & IXGBE_AUTOC_KX_SUPP)
+ *speed |= IXGBE_LINK_SPEED_1GB_FULL;
+ *negotiation = true;
+ break;
+
+ case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII:
+ *speed = IXGBE_LINK_SPEED_100_FULL;
+ if (hw->mac.orig_autoc & IXGBE_AUTOC_KR_SUPP)
+ *speed |= IXGBE_LINK_SPEED_10GB_FULL;
+ if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP)
+ *speed |= IXGBE_LINK_SPEED_10GB_FULL;
+ if (hw->mac.orig_autoc & IXGBE_AUTOC_KX_SUPP)
+ *speed |= IXGBE_LINK_SPEED_1GB_FULL;
+ *negotiation = true;
+ break;
+
+ case IXGBE_AUTOC_LMS_SGMII_1G_100M:
+ *speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL;
+ *negotiation = false;
+ break;
+
+ default:
+ status = IXGBE_ERR_LINK_SETUP;
+ goto out;
+ break;
+ }
+
+ if (hw->phy.multispeed_fiber) {
+ *speed |= IXGBE_LINK_SPEED_10GB_FULL |
+ IXGBE_LINK_SPEED_1GB_FULL;
+ *negotiation = true;
+ }
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_get_copper_link_capabilities_82599 - Determines link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @autoneg: boolean auto-negotiation value
+ *
+ * Determines the link capabilities by reading the AUTOC register.
+ **/
+static s32 ixgbe_get_copper_link_capabilities_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg)
+{
+ s32 status = IXGBE_ERR_LINK_SETUP;
+ u16 speed_ability;
+
+ *speed = 0;
+ *autoneg = true;
+
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ &speed_ability);
+
+ if (status == 0) {
+ if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G)
+ *speed |= IXGBE_LINK_SPEED_10GB_FULL;
+ if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G)
+ *speed |= IXGBE_LINK_SPEED_1GB_FULL;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_get_media_type_82599 - Get media type
+ * @hw: pointer to hardware structure
+ *
+ * Returns the media type (fiber, copper, backplane)
+ **/
+enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
+{
+ enum ixgbe_media_type media_type;
+
+ /* Detect if there is a copper PHY attached. */
+ if (hw->phy.type == ixgbe_phy_cu_unknown ||
+ hw->phy.type == ixgbe_phy_tn) {
+ media_type = ixgbe_media_type_copper;
+ goto out;
+ }
+
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_82599:
+ case IXGBE_DEV_ID_82599_KX4:
+ /* Default device ID is mezzanine card KX/KX4 */
+ media_type = ixgbe_media_type_backplane;
+ break;
+ case IXGBE_DEV_ID_82599_SFP:
+ media_type = ixgbe_media_type_fiber;
+ break;
+ default:
+ media_type = ixgbe_media_type_unknown;
+ break;
+ }
+out:
+ return media_type;
+}
+
+/**
+ * ixgbe_setup_mac_link_82599 - Setup MAC link settings
+ * @hw: pointer to hardware structure
+ *
+ * Configures link settings based on values in the ixgbe_hw struct.
+ * Restarts the link. Performs autonegotiation if needed.
+ **/
+s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw)
+{
+ u32 autoc_reg;
+ u32 links_reg;
+ u32 i;
+ s32 status = 0;
+
+ /* Restart link */
+ autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+
+ /* Only poll for autoneg to complete if specified to do so */
+ if (hw->phy.autoneg_wait_to_complete) {
+ if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+ IXGBE_AUTOC_LMS_KX4_KX_KR ||
+ (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+ IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
+ (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+ IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
+ links_reg = 0; /* Just in case Autoneg time = 0 */
+ for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
+ links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+ if (links_reg & IXGBE_LINKS_KX_AN_COMP)
+ break;
+ msleep(100);
+ }
+ if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
+ status = IXGBE_ERR_AUTONEG_NOT_COMPLETE;
+ hw_dbg(hw, "Autoneg did not complete.\n");
+ }
+ }
+ }
+
+ /* Set up flow control */
+ status = ixgbe_setup_fc_generic(hw, 0);
+
+ /* Add delay to filter out noises during initial link setup */
+ msleep(50);
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_mac_link_multispeed_fiber - Setup MAC link settings
+ * @hw: pointer to hardware structure
+ *
+ * Configures link settings based on values in the ixgbe_hw struct.
+ * Restarts the link for multi-speed fiber at 1G speed, if link
+ * fails at 10G.
+ * Performs autonegotiation if needed.
+ **/
+s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw)
+{
+ s32 status = 0;
+ ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_82599_AUTONEG;
+ status = ixgbe_setup_mac_link_speed_multispeed_fiber(hw,
+ link_speed,
+ true, true);
+ return status;
+}
+
+/**
+ * ixgbe_setup_mac_link_speed_multispeed_fiber - Set MAC link speed
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg: true if autonegotiation enabled
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ * Set the link speed in the AUTOC register and restarts link.
+ **/
+s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete)
+{
+ s32 status = 0;
+ ixgbe_link_speed phy_link_speed;
+ ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN;
+ u32 speedcnt = 0;
+ u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ bool link_up = false;
+ bool negotiation;
+
+ /* Mask off requested but non-supported speeds */
+ hw->mac.ops.get_link_capabilities(hw, &phy_link_speed, &negotiation);
+ speed &= phy_link_speed;
+
+ /*
+ * Try each speed one by one, highest priority first. We do this in
+ * software because 10gb fiber doesn't support speed autonegotiation.
+ */
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
+ speedcnt++;
+ highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL;
+
+ /* Set hardware SDP's */
+ esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+
+ ixgbe_setup_mac_link_speed_82599(hw,
+ IXGBE_LINK_SPEED_10GB_FULL,
+ autoneg,
+ autoneg_wait_to_complete);
+
+ msleep(50);
+
+ /* If we have link, just jump out */
+ hw->mac.ops.check_link(hw, &phy_link_speed, &link_up, false);
+ if (link_up)
+ goto out;
+ }
+
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
+ speedcnt++;
+ if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN)
+ highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL;
+
+ /* Set hardware SDP's */
+ esdp_reg &= ~IXGBE_ESDP_SDP5;
+ esdp_reg |= IXGBE_ESDP_SDP5_DIR;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+
+ ixgbe_setup_mac_link_speed_82599(
+ hw, IXGBE_LINK_SPEED_1GB_FULL, autoneg,
+ autoneg_wait_to_complete);
+
+ msleep(50);
+
+ /* If we have link, just jump out */
+ hw->mac.ops.check_link(hw, &phy_link_speed, &link_up, false);
+ if (link_up)
+ goto out;
+ }
+
+ /*
+ * We didn't get link. Configure back to the highest speed we tried,
+ * (if there was more than one). We call ourselves back with just the
+ * single highest speed that the user requested.
+ */
+ if (speedcnt > 1)
+ status = ixgbe_setup_mac_link_speed_multispeed_fiber(hw,
+ highest_link_speed,
+ autoneg,
+ autoneg_wait_to_complete);
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_check_mac_link_82599 - Determine link and speed status
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @link_up: true when link is up
+ * @link_up_wait_to_complete: bool used to wait for link up or not
+ *
+ * Reads the links register to determine if link is up and the current speed
+ **/
+s32 ixgbe_check_mac_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+ bool *link_up, bool link_up_wait_to_complete)
+{
+ u32 links_reg;
+ u32 i;
+
+ links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+ if (link_up_wait_to_complete) {
+ for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
+ if (links_reg & IXGBE_LINKS_UP) {
+ *link_up = true;
+ break;
+ } else {
+ *link_up = false;
+ }
+ msleep(100);
+ links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+ }
+ } else {
+ if (links_reg & IXGBE_LINKS_UP)
+ *link_up = true;
+ else
+ *link_up = false;
+ }
+
+ if ((links_reg & IXGBE_LINKS_SPEED_82599) ==
+ IXGBE_LINKS_SPEED_10G_82599)
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ else if ((links_reg & IXGBE_LINKS_SPEED_82599) ==
+ IXGBE_LINKS_SPEED_1G_82599)
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ else
+ *speed = IXGBE_LINK_SPEED_100_FULL;
+
+
+ return 0;
+}
+
+/**
+ * ixgbe_setup_mac_link_speed_82599 - Set MAC link speed
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg: true if autonegotiation enabled
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ * Set the link speed in the AUTOC register and restarts link.
+ **/
+s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed, bool autoneg,
+ bool autoneg_wait_to_complete)
+{
+ s32 status = 0;
+ u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+ u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
+ u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
+ u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
+ u32 links_reg;
+ u32 i;
+ ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
+
+ /* Check to see if speed passed in is supported. */
+ hw->mac.ops.get_link_capabilities(hw, &link_capabilities, &autoneg);
+ speed &= link_capabilities;
+
+ if (speed == IXGBE_LINK_SPEED_UNKNOWN) {
+ status = IXGBE_ERR_LINK_SETUP;
+ } else if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
+ link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
+ link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
+ /* Set KX4/KX/KR support according to speed requested */
+ autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP);
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+ if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP)
+ autoc |= IXGBE_AUTOC_KX4_SUPP;
+ if (hw->mac.orig_autoc & IXGBE_AUTOC_KR_SUPP)
+ autoc |= IXGBE_AUTOC_KR_SUPP;
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+ autoc |= IXGBE_AUTOC_KX_SUPP;
+ } else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) &&
+ (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN ||
+ link_mode == IXGBE_AUTOC_LMS_1G_AN)) {
+ /* Switch from 1G SFI to 10G SFI if requested */
+ if ((speed == IXGBE_LINK_SPEED_10GB_FULL) &&
+ (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)) {
+ autoc &= ~IXGBE_AUTOC_LMS_MASK;
+ autoc |= IXGBE_AUTOC_LMS_10G_SERIAL;
+ }
+ } else if ((pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) &&
+ (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) {
+ /* Switch from 10G SFI to 1G SFI if requested */
+ if ((speed == IXGBE_LINK_SPEED_1GB_FULL) &&
+ (pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) {
+ autoc &= ~IXGBE_AUTOC_LMS_MASK;
+ if (autoneg)
+ autoc |= IXGBE_AUTOC_LMS_1G_AN;
+ else
+ autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN;
+ }
+ }
+
+ if (status == 0) {
+ /* Restart link */
+ autoc |= IXGBE_AUTOC_AN_RESTART;
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
+
+ /* Only poll for autoneg to complete if specified to do so */
+ if (autoneg_wait_to_complete) {
+ if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
+ link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
+ link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
+ links_reg = 0; /*Just in case Autoneg time=0*/
+ for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
+ links_reg =
+ IXGBE_READ_REG(hw, IXGBE_LINKS);
+ if (links_reg & IXGBE_LINKS_KX_AN_COMP)
+ break;
+ msleep(100);
+ }
+ if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
+ status =
+ IXGBE_ERR_AUTONEG_NOT_COMPLETE;
+ hw_dbg(hw, "Autoneg did not "
+ "complete.\n");
+ }
+ }
+ }
+
+ /* Set up flow control */
+ status = ixgbe_setup_fc_generic(hw, 0);
+
+ /* Add delay to filter out noises during initial link setup */
+ msleep(50);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_copper_link_82599 - Setup copper link settings
+ * @hw: pointer to hardware structure
+ *
+ * Restarts the link on PHY and then MAC. Performs autonegotiation if needed.
+ **/
+static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw)
+{
+ s32 status;
+
+ /* Restart autonegotiation on PHY */
+ status = hw->phy.ops.setup_link(hw);
+
+ /* Set up MAC */
+ ixgbe_setup_mac_link_82599(hw);
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_copper_link_speed_82599 - Set the PHY autoneg advertised field
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg: true if autonegotiation enabled
+ * @autoneg_wait_to_complete: true if waiting is needed to complete
+ *
+ * Restarts link on PHY and MAC based on settings passed in.
+ **/
+static s32 ixgbe_setup_copper_link_speed_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete)
+{
+ s32 status;
+
+ /* Setup the PHY according to input speed */
+ status = hw->phy.ops.setup_link_speed(hw, speed, autoneg,
+ autoneg_wait_to_complete);
+ /* Set up MAC */
+ ixgbe_setup_mac_link_82599(hw);
+
+ return status;
+}
+
+/**
+ * ixgbe_reset_hw_82599 - Perform hardware reset
+ * @hw: pointer to hardware structure
+ *
+ * Resets the hardware by resetting the transmit and receive units, masks
+ * and clears all interrupts, perform a PHY reset, and perform a link (MAC)
+ * reset.
+ **/
+s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
+{
+ s32 status = 0;
+ u32 ctrl, ctrl_ext;
+ u32 i;
+ u32 autoc;
+ u32 autoc2;
+
+ /* Call adapter stop to disable tx/rx and clear interrupts */
+ hw->mac.ops.stop_adapter(hw);
+
+ /* Reset PHY */
+ hw->phy.ops.reset(hw);
+
+ /*
+ * Prevent the PCI-E bus from from hanging by disabling PCI-E master
+ * access and verify no pending requests before reset
+ */
+ if (ixgbe_disable_pcie_master(hw) != 0) {
+ status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
+ hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
+ }
+
+ /*
+ * Issue global reset to the MAC. This needs to be a SW reset.
+ * If link reset is used, it might reset the MAC when mng is using it
+ */
+ ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST));
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Poll for reset bit to self-clear indicating reset is complete */
+ for (i = 0; i < 10; i++) {
+ udelay(1);
+ ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+ if (!(ctrl & IXGBE_CTRL_RST))
+ break;
+ }
+ if (ctrl & IXGBE_CTRL_RST) {
+ status = IXGBE_ERR_RESET_FAILED;
+ hw_dbg(hw, "Reset polling failed to complete.\n");
+ }
+ /* Clear PF Reset Done bit so PF/VF Mail Ops can work */
+ ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
+ ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD;
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
+
+ msleep(50);
+
+
+
+ /*
+ * Store the original AUTOC/AUTOC2 values if they have not been
+ * stored off yet. Otherwise restore the stored original
+ * values since the reset operation sets back to defaults.
+ */
+ autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+ if (hw->mac.orig_link_settings_stored == false) {
+ hw->mac.orig_autoc = autoc;
+ hw->mac.orig_autoc2 = autoc2;
+ hw->mac.orig_link_settings_stored = true;
+ } else {
+ if (autoc != hw->mac.orig_autoc)
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (hw->mac.orig_autoc |
+ IXGBE_AUTOC_AN_RESTART));
+
+ if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) !=
+ (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) {
+ autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK;
+ autoc2 |= (hw->mac.orig_autoc2 &
+ IXGBE_AUTOC2_UPPER_MASK);
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2);
+ }
+ }
+
+ /* Store the permanent mac address */
+ hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+ return status;
+}
+
+/**
+ * ixgbe_clear_vmdq_82599 - Disassociate a VMDq pool index from a rx address
+ * @hw: pointer to hardware struct
+ * @rar: receive address register index to disassociate
+ * @vmdq: VMDq pool index to remove from the rar
+ **/
+s32 ixgbe_clear_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+ u32 mpsar_lo, mpsar_hi;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ if (rar < rar_entries) {
+ mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
+ mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
+
+ if (!mpsar_lo && !mpsar_hi)
+ goto done;
+
+ if (vmdq == IXGBE_CLEAR_VMDQ_ALL) {
+ if (mpsar_lo) {
+ IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0);
+ mpsar_lo = 0;
+ }
+ if (mpsar_hi) {
+ IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0);
+ mpsar_hi = 0;
+ }
+ } else if (vmdq < 32) {
+ mpsar_lo &= ~(1 << vmdq);
+ IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar_lo);
+ } else {
+ mpsar_hi &= ~(1 << (vmdq - 32));
+ IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar_hi);
+ }
+
+ /* was that the last pool using this rar? */
+ if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0)
+ hw->mac.ops.clear_rar(hw, rar);
+ } else {
+ hw_dbg(hw, "RAR index %d is out of range.\n", rar);
+ }
+
+done:
+ return 0;
+}
+
+/**
+ * ixgbe_set_vmdq_82599 - Associate a VMDq pool index with a rx address
+ * @hw: pointer to hardware struct
+ * @rar: receive address register index to associate with a VMDq index
+ * @vmdq: VMDq pool index
+ **/
+s32 ixgbe_set_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+ u32 mpsar;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ if (rar < rar_entries) {
+ if (vmdq < 32) {
+ mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
+ mpsar |= 1 << vmdq;
+ IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar);
+ } else {
+ mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
+ mpsar |= 1 << (vmdq - 32);
+ IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar);
+ }
+ } else {
+ hw_dbg(hw, "RAR index %d is out of range.\n", rar);
+ }
+ return 0;
+}
+
+/**
+ * ixgbe_set_vfta_82599 - Set VLAN filter table
+ * @hw: pointer to hardware structure
+ * @vlan: VLAN id to write to VLAN filter
+ * @vind: VMDq output index that maps queue to VLAN id in VFVFB
+ * @vlan_on: boolean flag to turn on/off VLAN in VFVF
+ *
+ * Turn on/off specified VLAN in the VLAN filter table.
+ **/
+s32 ixgbe_set_vfta_82599(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+ bool vlan_on)
+{
+ u32 regindex;
+ u32 bitindex;
+ u32 bits;
+ u32 first_empty_slot;
+
+ if (vlan > 4095)
+ return IXGBE_ERR_PARAM;
+
+ /*
+ * this is a 2 part operation - first the VFTA, then the
+ * VLVF and VLVFB if vind is set
+ */
+
+ /* Part 1
+ * The VFTA is a bitstring made up of 128 32-bit registers
+ * that enable the particular VLAN id, much like the MTA:
+ * bits[11-5]: which register
+ * bits[4-0]: which bit in the register
+ */
+ regindex = (vlan >> 5) & 0x7F;
+ bitindex = vlan & 0x1F;
+ bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex));
+ if (vlan_on)
+ bits |= (1 << bitindex);
+ else
+ bits &= ~(1 << bitindex);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits);
+
+
+ /* Part 2
+ * If the vind is set
+ * Either vlan_on
+ * make sure the vlan is in VLVF
+ * set the vind bit in the matching VLVFB
+ * Or !vlan_on
+ * clear the pool bit and possibly the vind
+ */
+ if (vind) {
+ /* find the vlanid or the first empty slot */
+ first_empty_slot = 0;
+
+ for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) {
+ bits = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex));
+ if (!bits && !first_empty_slot)
+ first_empty_slot = regindex;
+ else if ((bits & 0x0FFF) == vlan)
+ break;
+ }
+
+ if (regindex >= IXGBE_VLVF_ENTRIES) {
+ if (first_empty_slot)
+ regindex = first_empty_slot;
+ else {
+ hw_dbg(hw, "No space in VLVF.\n");
+ goto out;
+ }
+ }
+
+ if (vlan_on) {
+ /* set the pool bit */
+ if (vind < 32) {
+ bits = IXGBE_READ_REG(hw,
+ IXGBE_VLVFB(regindex * 2));
+ bits |= (1 << vind);
+ IXGBE_WRITE_REG(hw,
+ IXGBE_VLVFB(regindex * 2), bits);
+ } else {
+ bits = IXGBE_READ_REG(hw,
+ IXGBE_VLVFB((regindex * 2) + 1));
+ bits |= (1 << vind);
+ IXGBE_WRITE_REG(hw,
+ IXGBE_VLVFB((regindex * 2) + 1), bits);
+ }
+ } else {
+ /* clear the pool bit */
+ if (vind < 32) {
+ bits = IXGBE_READ_REG(hw,
+ IXGBE_VLVFB(regindex * 2));
+ bits &= ~(1 << vind);
+ IXGBE_WRITE_REG(hw,
+ IXGBE_VLVFB(regindex * 2), bits);
+ bits |= IXGBE_READ_REG(hw,
+ IXGBE_VLVFB((regindex * 2) + 1));
+ } else {
+ bits = IXGBE_READ_REG(hw,
+ IXGBE_VLVFB((regindex * 2) + 1));
+ bits &= ~(1 << vind);
+ IXGBE_WRITE_REG(hw,
+ IXGBE_VLVFB((regindex * 2) + 1), bits);
+ bits |= IXGBE_READ_REG(hw,
+ IXGBE_VLVFB(regindex * 2));
+ }
+ }
+
+ if (bits)
+ IXGBE_WRITE_REG(hw, IXGBE_VLVF(regindex),
+ (IXGBE_VLVF_VIEN | vlan));
+ else
+ IXGBE_WRITE_REG(hw, IXGBE_VLVF(regindex), 0);
+ }
+
+out:
+ return 0;
+}
+
+/**
+ * ixgbe_clear_vfta_82599 - Clear VLAN filter table
+ * @hw: pointer to hardware structure
+ *
+ * Clears the VLAN filer table, and the VMDq index associated with the filter
+ **/
+s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw)
+{
+ u32 offset;
+
+ for (offset = 0; offset < hw->mac.vft_size; offset++)
+ IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
+
+ for (offset = 0; offset < IXGBE_VLVF_ENTRIES; offset++) {
+ IXGBE_WRITE_REG(hw, IXGBE_VLVF(offset), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset * 2), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VLVFB((offset * 2) + 1), 0);
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_blink_led_start_82599 - Blink LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to blink
+ **/
+s32 ixgbe_blink_led_start_82599(struct ixgbe_hw *hw, u32 index)
+{
+ u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+ led_reg &= ~IXGBE_LED_MODE_MASK(index);
+ led_reg |= IXGBE_LED_BLINK(index);
+ IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return 0;
+}
+
+/**
+ * ixgbe_blink_led_stop_82599 - Stop blinking LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to stop blinking
+ **/
+s32 ixgbe_blink_led_stop_82599(struct ixgbe_hw *hw, u32 index)
+{
+ u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+ led_reg &= ~IXGBE_LED_MODE_MASK(index);
+ led_reg &= ~IXGBE_LED_BLINK(index);
+ IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return 0;
+}
+
+/**
+ * ixgbe_init_uta_tables_82599 - Initialize the Unicast Table Array
+ * @hw: pointer to hardware structure
+ **/
+s32 ixgbe_init_uta_tables_82599(struct ixgbe_hw *hw)
+{
+ int i;
+ hw_dbg(hw, " Clearing UTA\n");
+
+ for (i = 0; i < 128; i++)
+ IXGBE_WRITE_REG(hw, IXGBE_UTA(i), 0);
+
+ return 0;
+}
+
+/**
+ * ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register
+ * @hw: pointer to hardware structure
+ * @reg: analog register to read
+ * @val: read value
+ *
+ * Performs read operation to Omer analog register specified.
+ **/
+s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val)
+{
+ u32 core_ctl;
+
+ IXGBE_WRITE_REG(hw, IXGBE_CORECTL, IXGBE_CORECTL_WRITE_CMD |
+ (reg << 8));
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(10);
+ core_ctl = IXGBE_READ_REG(hw, IXGBE_CORECTL);
+ *val = (u8)core_ctl;
+
+ return 0;
+}
+
+/**
+ * ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register
+ * @hw: pointer to hardware structure
+ * @reg: atlas register to write
+ * @val: value to write
+ *
+ * Performs write operation to Omer analog register specified.
+ **/
+s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val)
+{
+ u32 core_ctl;
+
+ core_ctl = (reg << 8) | val;
+ IXGBE_WRITE_REG(hw, IXGBE_CORECTL, core_ctl);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(10);
+
+ return 0;
+}
+
+/**
+ * ixgbe_start_hw_82599 - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
+ *
+ * Starts the hardware using the generic start_hw function.
+ * Then performs device-specific:
+ * Clears the rate limiter registers.
+ **/
+s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)
+{
+ u32 q_num;
+
+ ixgbe_start_hw_generic(hw);
+
+ /* Clear the rate limiters */
+ for (q_num = 0; q_num < hw->mac.max_tx_queues; q_num++) {
+ IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, q_num);
+ IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, 0);
+ }
+ IXGBE_WRITE_FLUSH(hw);
+
+ return 0;
+}
+
+/**
+ * ixgbe_identify_phy_82599 - Get physical layer module
+ * @hw: pointer to hardware structure
+ *
+ * Determines the physical layer module found on the current adapter.
+ **/
+s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+ status = ixgbe_identify_phy_generic(hw);
+ if (status != 0)
+ status = ixgbe_identify_sfp_module_generic(hw);
+ return status;
+}
+
+/**
+ * ixgbe_get_supported_physical_layer_82599 - Returns physical layer type
+ * @hw: pointer to hardware structure
+ *
+ * Determines physical layer capabilities of the current configuration.
+ **/
+u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
+{
+ u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_82599:
+ case IXGBE_DEV_ID_82599_KX4:
+ /* Default device ID is mezzanine card KX/KX4 */
+ physical_layer = (IXGBE_PHYSICAL_LAYER_10GBASE_KX4 |
+ IXGBE_PHYSICAL_LAYER_1000BASE_KX);
+ break;
+ case IXGBE_DEV_ID_82599_SFP:
+ hw->phy.ops.identify_sfp(hw);
+
+ switch (hw->phy.sfp_type) {
+ case ixgbe_sfp_type_da_cu:
+ physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+ break;
+ case ixgbe_sfp_type_sr:
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+ break;
+ case ixgbe_sfp_type_lr:
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+ break;
+ default:
+ physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ break;
+ }
+ break;
+ default:
+ physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ break;
+ }
+
+ return physical_layer;
+}
+
+/**
+ * ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599
+ * @hw: pointer to hardware structure
+ * @regval: register value to write to RXCTRL
+ *
+ * Enables the Rx DMA unit for 82599
+ **/
+s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval)
+{
+#define IXGBE_MAX_SECRX_POLL 30
+ int i;
+ int secrxreg;
+
+ /*
+ * Workaround for 82599 silicon errata when enabling the Rx datapath.
+ * If traffic is incoming before we enable the Rx unit, it could hang
+ * the Rx DMA unit. Therefore, make sure the security engine is
+ * completely disabled prior to enabling the Rx unit.
+ */
+ secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
+ secrxreg |= IXGBE_SECRXCTRL_RX_DIS;
+ IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg);
+ for (i = 0; i < IXGBE_MAX_SECRX_POLL; i++) {
+ secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT);
+ if (secrxreg & IXGBE_SECRXSTAT_SECRX_RDY)
+ break;
+ else
+ udelay(10);
+ }
+
+ /* For informational purposes only */
+ if (i >= IXGBE_MAX_SECRX_POLL)
+ hw_dbg(hw, "Rx unit being enabled before security "
+ "path fully disabled. Continuing with init.\n");
+
+ IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval);
+ secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
+ secrxreg &= ~IXGBE_SECRXCTRL_RX_DIS;
+ IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return 0;
+}
+
+static struct ixgbe_mac_operations mac_ops_82599 = {
+ .init_hw = &ixgbe_init_hw_generic,
+ .reset_hw = &ixgbe_reset_hw_82599,
+ .start_hw = &ixgbe_start_hw_82599,
+ .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic,
+ .get_media_type = &ixgbe_get_media_type_82599,
+ .get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82599,
+ .enable_rx_dma = &ixgbe_enable_rx_dma_82599,
+ .get_mac_addr = &ixgbe_get_mac_addr_generic,
+ .stop_adapter = &ixgbe_stop_adapter_generic,
+ .get_bus_info = &ixgbe_get_bus_info_generic,
+ .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie,
+ .read_analog_reg8 = &ixgbe_read_analog_reg8_82599,
+ .write_analog_reg8 = &ixgbe_write_analog_reg8_82599,
+ .setup_link = &ixgbe_setup_mac_link_82599,
+ .setup_link_speed = &ixgbe_setup_mac_link_speed_82599,
+ .check_link = &ixgbe_check_mac_link_82599,
+ .get_link_capabilities = &ixgbe_get_link_capabilities_82599,
+ .led_on = &ixgbe_led_on_generic,
+ .led_off = &ixgbe_led_off_generic,
+ .blink_led_start = &ixgbe_blink_led_start_82599,
+ .blink_led_stop = &ixgbe_blink_led_stop_82599,
+ .set_rar = &ixgbe_set_rar_generic,
+ .clear_rar = &ixgbe_clear_rar_generic,
+ .set_vmdq = &ixgbe_set_vmdq_82599,
+ .clear_vmdq = &ixgbe_clear_vmdq_82599,
+ .init_rx_addrs = &ixgbe_init_rx_addrs_generic,
+ .update_uc_addr_list = &ixgbe_update_uc_addr_list_generic,
+ .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic,
+ .enable_mc = &ixgbe_enable_mc_generic,
+ .disable_mc = &ixgbe_disable_mc_generic,
+ .clear_vfta = &ixgbe_clear_vfta_82599,
+ .set_vfta = &ixgbe_set_vfta_82599,
+ .setup_fc = &ixgbe_setup_fc_generic,
+ .init_uta_tables = &ixgbe_init_uta_tables_82599,
+ .setup_sfp = &ixgbe_setup_sfp_modules_82599,
+};
+
+static struct ixgbe_eeprom_operations eeprom_ops_82599 = {
+ .init_params = &ixgbe_init_eeprom_params_generic,
+ .read = &ixgbe_read_eeprom_generic,
+ .write = &ixgbe_write_eeprom_generic,
+ .validate_checksum = &ixgbe_validate_eeprom_checksum_generic,
+ .update_checksum = &ixgbe_update_eeprom_checksum_generic,
+};
+
+static struct ixgbe_phy_operations phy_ops_82599 = {
+ .identify = &ixgbe_identify_phy_82599,
+ .identify_sfp = &ixgbe_identify_sfp_module_generic,
+ .reset = &ixgbe_reset_phy_generic,
+ .read_reg = &ixgbe_read_phy_reg_generic,
+ .write_reg = &ixgbe_write_phy_reg_generic,
+ .setup_link = &ixgbe_setup_phy_link_generic,
+ .setup_link_speed = &ixgbe_setup_phy_link_speed_generic,
+ .read_i2c_byte = &ixgbe_read_i2c_byte_generic,
+ .write_i2c_byte = &ixgbe_write_i2c_byte_generic,
+ .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic,
+ .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic,
+};
+
+struct ixgbe_info ixgbe_82599_info = {
+ .mac = ixgbe_mac_82599EB,
+ .get_invariants = &ixgbe_get_invariants_82599,
+ .mac_ops = &mac_ops_82599,
+ .eeprom_ops = &eeprom_ops_82599,
+ .phy_ops = &phy_ops_82599,
+};
@@ -29,6 +29,7 @@
#include <linux/delay.h>
#include <linux/sched.h>
+#include "ixgbe.h"
#include "ixgbe_common.h"
#include "ixgbe_phy.h"
@@ -251,6 +252,81 @@ s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr)
}
/**
+ * ixgbe_get_bus_info_generic - Generic set PCI bus info
+ * @hw: pointer to hardware structure
+ *
+ * Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure
+ **/
+s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw)
+{
+ struct ixgbe_adapter *adapter = hw->back;
+ struct ixgbe_mac_info *mac = &hw->mac;
+ u16 link_status;
+
+ hw->bus.type = ixgbe_bus_type_pci_express;
+
+ /* Get the negotiated link width and speed from PCI config space */
+ pci_read_config_word(adapter->pdev, IXGBE_PCI_LINK_STATUS,
+ &link_status);
+
+ switch (link_status & IXGBE_PCI_LINK_WIDTH) {
+ case IXGBE_PCI_LINK_WIDTH_1:
+ hw->bus.width = ixgbe_bus_width_pcie_x1;
+ break;
+ case IXGBE_PCI_LINK_WIDTH_2:
+ hw->bus.width = ixgbe_bus_width_pcie_x2;
+ break;
+ case IXGBE_PCI_LINK_WIDTH_4:
+ hw->bus.width = ixgbe_bus_width_pcie_x4;
+ break;
+ case IXGBE_PCI_LINK_WIDTH_8:
+ hw->bus.width = ixgbe_bus_width_pcie_x8;
+ break;
+ default:
+ hw->bus.width = ixgbe_bus_width_unknown;
+ break;
+ }
+
+ switch (link_status & IXGBE_PCI_LINK_SPEED) {
+ case IXGBE_PCI_LINK_SPEED_2500:
+ hw->bus.speed = ixgbe_bus_speed_2500;
+ break;
+ case IXGBE_PCI_LINK_SPEED_5000:
+ hw->bus.speed = ixgbe_bus_speed_5000;
+ break;
+ default:
+ hw->bus.speed = ixgbe_bus_speed_unknown;
+ break;
+ }
+
+ mac->ops.set_lan_id(hw);
+
+ return 0;
+}
+
+/**
+ * ixgbe_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices
+ * @hw: pointer to the HW structure
+ *
+ * Determines the LAN function id by reading memory-mapped registers
+ * and swaps the port value if requested.
+ **/
+void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw)
+{
+ struct ixgbe_bus_info *bus = &hw->bus;
+ u32 reg;
+
+ reg = IXGBE_READ_REG(hw, IXGBE_STATUS);
+ bus->func = (reg & IXGBE_STATUS_LAN_ID) >> IXGBE_STATUS_LAN_ID_SHIFT;
+ bus->lan_id = bus->func;
+
+ /* check for a port swap */
+ reg = IXGBE_READ_REG(hw, IXGBE_FACTPS);
+ if (reg & IXGBE_FACTPS_LFS)
+ bus->func ^= 0x1;
+}
+
+/**
* ixgbe_stop_adapter_generic - Generic stop Tx/Rx units
* @hw: pointer to hardware structure
*
@@ -390,6 +466,73 @@ s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw)
}
/**
+ * ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be written to
+ * @data: 16 bit word to be written to the EEPROM
+ *
+ * If ixgbe_eeprom_update_checksum is not called after this function, the
+ * EEPROM will most likely contain an invalid checksum.
+ **/
+s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+ s32 status;
+ u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI;
+
+ hw->eeprom.ops.init_params(hw);
+
+ if (offset >= hw->eeprom.word_size) {
+ status = IXGBE_ERR_EEPROM;
+ goto out;
+ }
+
+ /* Prepare the EEPROM for writing */
+ status = ixgbe_acquire_eeprom(hw);
+
+ if (status == 0) {
+ if (ixgbe_ready_eeprom(hw) != 0) {
+ ixgbe_release_eeprom(hw);
+ status = IXGBE_ERR_EEPROM;
+ }
+ }
+
+ if (status == 0) {
+ ixgbe_standby_eeprom(hw);
+
+ /* Send the WRITE ENABLE command (8 bit opcode ) */
+ ixgbe_shift_out_eeprom_bits(hw, IXGBE_EEPROM_WREN_OPCODE_SPI,
+ IXGBE_EEPROM_OPCODE_BITS);
+
+ ixgbe_standby_eeprom(hw);
+
+ /*
+ * Some SPI eeproms use the 8th address bit embedded in the
+ * opcode
+ */
+ if ((hw->eeprom.address_bits == 8) && (offset >= 128))
+ write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
+
+ /* Send the Write command (8-bit opcode + addr) */
+ ixgbe_shift_out_eeprom_bits(hw, write_opcode,
+ IXGBE_EEPROM_OPCODE_BITS);
+ ixgbe_shift_out_eeprom_bits(hw, (u16)(offset*2),
+ hw->eeprom.address_bits);
+
+ /* Send the data */
+ data = (data >> 8) | (data << 8);
+ ixgbe_shift_out_eeprom_bits(hw, data, 16);
+ ixgbe_standby_eeprom(hw);
+
+ msleep(hw->eeprom.semaphore_delay);
+ /* Done with writing - release the EEPROM */
+ ixgbe_release_eeprom(hw);
+ }
+
+out:
+ return status;
+}
+
+/**
* ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang
* @hw: pointer to hardware structure
* @offset: offset within the EEPROM to be read
@@ -1487,6 +1630,101 @@ s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw)
}
/**
+ * ixgbe_fc_enable - Enable flow control
+ * @hw: pointer to hardware structure
+ * @packetbuf_num: packet buffer number (0-7)
+ *
+ * Enable flow control according to the current settings.
+ **/
+s32 ixgbe_fc_enable(struct ixgbe_hw *hw, s32 packetbuf_num)
+{
+ s32 ret_val = 0;
+ u32 mflcn_reg;
+ u32 fccfg_reg;
+ u32 reg;
+
+ mflcn_reg = IXGBE_READ_REG(hw, IXGBE_MFLCN);
+ mflcn_reg &= ~(IXGBE_MFLCN_RFCE | IXGBE_MFLCN_RPFCE);
+
+ fccfg_reg = IXGBE_READ_REG(hw, IXGBE_FCCFG);
+ fccfg_reg &= ~(IXGBE_FCCFG_TFCE_802_3X | IXGBE_FCCFG_TFCE_PRIORITY);
+
+ /*
+ * The possible values of fc.current_mode are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames,
+ * but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames but
+ * we do not support receiving pause frames).
+ * 3: Both Rx and Tx flow control (symmetric) are enabled.
+ * other: Invalid.
+ */
+ switch (hw->fc.current_mode) {
+ case ixgbe_fc_none:
+ /* Flow control completely disabled by software override. */
+ break;
+ case ixgbe_fc_rx_pause:
+ /*
+ * Rx Flow control is enabled and Tx Flow control is
+ * disabled by software override. Since there really
+ * isn't a way to advertise that we are capable of RX
+ * Pause ONLY, we will advertise that we support both
+ * symmetric and asymmetric Rx PAUSE. Later, we will
+ * disable the adapter's ability to send PAUSE frames.
+ */
+ mflcn_reg |= IXGBE_MFLCN_RFCE;
+ break;
+ case ixgbe_fc_tx_pause:
+ /*
+ * Tx Flow control is enabled, and Rx Flow control is
+ * disabled by software override.
+ */
+ fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X;
+ break;
+ case ixgbe_fc_full:
+ /* Flow control (both Rx and Tx) is enabled by SW override. */
+ mflcn_reg |= IXGBE_MFLCN_RFCE;
+ fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X;
+ break;
+ default:
+ hw_dbg(hw, "Flow control param set incorrectly\n");
+ ret_val = -IXGBE_ERR_CONFIG;
+ goto out;
+ break;
+ }
+
+ /* Enable 802.3x based flow control settings. */
+ IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn_reg);
+ IXGBE_WRITE_REG(hw, IXGBE_FCCFG, fccfg_reg);
+
+ /* Set up and enable Rx high/low water mark thresholds, enable XON. */
+ if (hw->fc.current_mode & ixgbe_fc_tx_pause) {
+ if (hw->fc.send_xon)
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(packetbuf_num),
+ (hw->fc.low_water | IXGBE_FCRTL_XONE));
+ else
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(packetbuf_num),
+ hw->fc.low_water);
+
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(packetbuf_num),
+ (hw->fc.high_water | IXGBE_FCRTH_FCEN));
+ }
+
+ /* Configure pause time (2 TCs per register) */
+ reg = IXGBE_READ_REG(hw, IXGBE_FCTTV(packetbuf_num));
+ if ((packetbuf_num & 1) == 0)
+ reg = (reg & 0xFFFF0000) | hw->fc.pause_time;
+ else
+ reg = (reg & 0x0000FFFF) | (hw->fc.pause_time << 16);
+ IXGBE_WRITE_REG(hw, IXGBE_FCTTV(packetbuf_num / 2), reg);
+
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTV, (hw->fc.pause_time >> 1));
+
+out:
+ return ret_val;
+}
+
+/**
* ixgbe_fc_autoneg - Configure flow control
* @hw: pointer to hardware structure
*
@@ -1625,6 +1863,74 @@ out:
}
/**
+ * ixgbe_setup_fc_generic - Set up flow control
+ * @hw: pointer to hardware structure
+ *
+ * Sets up flow control.
+ **/
+s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
+{
+ s32 ret_val = 0;
+ ixgbe_link_speed speed;
+ bool link_up;
+
+ /* Validate the packetbuf configuration */
+ if (packetbuf_num < 0 || packetbuf_num > 7) {
+ hw_dbg(hw, "Invalid packet buffer number [%d], expected range "
+ "is 0-7\n", packetbuf_num);
+ ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
+ goto out;
+ }
+
+ /*
+ * Validate the water mark configuration. Zero water marks are invalid
+ * because it causes the controller to just blast out fc packets.
+ */
+ if (!hw->fc.low_water || !hw->fc.high_water || !hw->fc.pause_time) {
+ hw_dbg(hw, "Invalid water mark configuration\n");
+ ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
+ goto out;
+ }
+
+ /*
+ * Validate the requested mode. Strict IEEE mode does not allow
+ * ixgbe_fc_rx_pause because it will cause testing anomalies.
+ */
+ if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
+ hw_dbg(hw, "ixgbe_fc_rx_pause not valid in strict "
+ "IEEE mode\n");
+ ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
+ goto out;
+ }
+
+ /*
+ * 10gig parts do not have a word in the EEPROM to determine the
+ * default flow control setting, so we explicitly set it to full.
+ */
+ if (hw->fc.requested_mode == ixgbe_fc_default)
+ hw->fc.requested_mode = ixgbe_fc_full;
+
+ /*
+ * Save off the requested flow control mode for use later. Depending
+ * on the link partner's capabilities, we may or may not use this mode.
+ */
+ hw->fc.current_mode = hw->fc.requested_mode;
+
+ /* Decide whether to use autoneg or not. */
+ hw->mac.ops.check_link(hw, &speed, &link_up, false);
+ if (hw->phy.multispeed_fiber && (speed == IXGBE_LINK_SPEED_1GB_FULL))
+ ret_val = ixgbe_fc_autoneg(hw);
+
+ if (ret_val)
+ goto out;
+
+ ret_val = ixgbe_fc_enable(hw, packetbuf_num);
+
+out:
+ return ret_val;
+}
+
+/**
* ixgbe_disable_pcie_master - Disable PCI-express master access
* @hw: pointer to hardware structure
*
@@ -1732,3 +2038,16 @@ void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask)
ixgbe_release_eeprom_semaphore(hw);
}
+/**
+ * ixgbe_enable_rx_dma_generic - Enable the Rx DMA unit
+ * @hw: pointer to hardware structure
+ * @regval: register value to write to RXCTRL
+ *
+ * Enables the Rx DMA unit
+ **/
+s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval)
+{
+ IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval);
+
+ return 0;
+}
@@ -37,12 +37,14 @@ s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw);
s32 ixgbe_read_pba_num_generic(struct ixgbe_hw *hw, u32 *pba_num);
s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr);
s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw);
+void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw);
s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw);
s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index);
s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index);
s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw);
+s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data);
s32 ixgbe_read_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 *data);
s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
u16 *data);
@@ -61,6 +63,7 @@ s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list,
u32 addr_count, ixgbe_mc_addr_itr func);
s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw);
s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw);
+s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval);
s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw, s32 packetbuf_num);
s32 ixgbe_fc_enable(struct ixgbe_hw *hw, s32 packtetbuf_num);
s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw);
@@ -75,6 +78,13 @@ s32 ixgbe_write_analog_reg8_generic(struct ixgbe_hw *hw, u32 reg, u8 val);
#define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg)))
+#ifndef writeq
+#define writeq(val, addr) writel((u32) (val), addr); \
+ writel((u32) (val >> 32), (addr + 4));
+#endif
+
+#define IXGBE_WRITE_REG64(a, reg, value) writeq((value), ((a)->hw_addr + (reg)))
+
#define IXGBE_READ_REG(a, reg) readl((a)->hw_addr + (reg))
#define IXGBE_WRITE_REG_ARRAY(a, reg, offset, value) (\
@@ -469,7 +469,7 @@ static void ixgbe_get_regs(struct net_device *netdev,
regs_buff[825] = IXGBE_READ_REG(hw, IXGBE_IP6AT);
regs_buff[826] = IXGBE_READ_REG(hw, IXGBE_WUPL);
regs_buff[827] = IXGBE_READ_REG(hw, IXGBE_WUPM);
- regs_buff[828] = IXGBE_READ_REG(hw, IXGBE_FHFT);
+ regs_buff[828] = IXGBE_READ_REG(hw, IXGBE_FHFT(0));
regs_buff[829] = IXGBE_READ_REG(hw, IXGBE_RMCS);
regs_buff[830] = IXGBE_READ_REG(hw, IXGBE_DPMCS);
@@ -32,6 +32,18 @@
#include "ixgbe_common.h"
#include "ixgbe_phy.h"
+static void ixgbe_i2c_start(struct ixgbe_hw *hw);
+static void ixgbe_i2c_stop(struct ixgbe_hw *hw);
+static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data);
+static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data);
+static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw);
+static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data);
+static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data);
+static s32 ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl);
+static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl);
+static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data);
+static bool ixgbe_get_i2c_data(u32 *i2cctl);
+static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw);
static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr);
static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id);
static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw);
@@ -543,8 +555,9 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
u8 identifier = 0;
u8 comp_codes_1g = 0;
u8 comp_codes_10g = 0;
- u8 oui_bytes[4] = {0, 0, 0, 0};
+ u8 oui_bytes[3] = {0, 0, 0};
u8 transmission_media = 0;
+ u16 enforce_sfp = 0;
status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER,
&identifier);
@@ -564,18 +577,48 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
/* ID Module
* =========
- * 0 SFP_DA_CU
- * 1 SFP_SR
- * 2 SFP_LR
+ * 0 SFP_DA_CU
+ * 1 SFP_SR
+ * 2 SFP_LR
+ * 3 SFP_DA_CORE0 - 82599-specific
+ * 4 SFP_DA_CORE1 - 82599-specific
+ * 5 SFP_SR/LR_CORE0 - 82599-specific
+ * 6 SFP_SR/LR_CORE1 - 82599-specific
*/
- if (transmission_media & IXGBE_SFF_TWIN_AX_CAPABLE)
- hw->phy.sfp_type = ixgbe_sfp_type_da_cu;
- else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
- hw->phy.sfp_type = ixgbe_sfp_type_sr;
- else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
- hw->phy.sfp_type = ixgbe_sfp_type_lr;
- else
- hw->phy.sfp_type = ixgbe_sfp_type_unknown;
+ if (hw->mac.type == ixgbe_mac_82598EB) {
+ if (transmission_media & IXGBE_SFF_TWIN_AX_CAPABLE)
+ hw->phy.sfp_type = ixgbe_sfp_type_da_cu;
+ else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
+ hw->phy.sfp_type = ixgbe_sfp_type_sr;
+ else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
+ hw->phy.sfp_type = ixgbe_sfp_type_lr;
+ else
+ hw->phy.sfp_type = ixgbe_sfp_type_unknown;
+ } else if (hw->mac.type == ixgbe_mac_82599EB) {
+ if (transmission_media & IXGBE_SFF_TWIN_AX_CAPABLE)
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_da_cu_core0;
+ else
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_da_cu_core1;
+ else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_srlr_core0;
+ else
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_srlr_core1;
+ else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_srlr_core0;
+ else
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_srlr_core1;
+ else
+ hw->phy.sfp_type = ixgbe_sfp_type_unknown;
+ }
/* Determine PHY vendor */
if (hw->phy.type == ixgbe_phy_unknown) {
@@ -607,6 +650,9 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
case IXGBE_SFF_VENDOR_OUI_AVAGO:
hw->phy.type = ixgbe_phy_sfp_avago;
break;
+ case IXGBE_SFF_VENDOR_OUI_INTEL:
+ hw->phy.type = ixgbe_phy_sfp_intel;
+ break;
default:
if (transmission_media &
IXGBE_SFF_TWIN_AX_CAPABLE)
@@ -616,7 +662,28 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
break;
}
}
- status = 0;
+ if (hw->mac.type == ixgbe_mac_82598EB ||
+ (hw->phy.sfp_type != ixgbe_sfp_type_sr &&
+ hw->phy.sfp_type != ixgbe_sfp_type_lr &&
+ hw->phy.sfp_type != ixgbe_sfp_type_srlr_core0 &&
+ hw->phy.sfp_type != ixgbe_sfp_type_srlr_core1)) {
+ status = 0;
+ goto out;
+ }
+
+ hw->eeprom.ops.read(hw, IXGBE_PHY_ENFORCE_INTEL_SFP_OFFSET,
+ &enforce_sfp);
+ if (!(enforce_sfp & IXGBE_PHY_ALLOW_ANY_SFP)) {
+ /* Make sure we're a supported PHY type */
+ if (hw->phy.type == ixgbe_phy_sfp_intel) {
+ status = 0;
+ } else {
+ hw_dbg(hw, "SFP+ module not supported\n");
+ status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ }
+ } else {
+ status = 0;
+ }
}
out:
@@ -651,7 +718,7 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset);
if ((!*list_offset) || (*list_offset == 0xFFFF))
- return IXGBE_ERR_PHY;
+ return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT;
/* Shift offset to first ID word */
(*list_offset)++;
@@ -688,6 +755,501 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
}
/**
+ * ixgbe_read_i2c_eeprom_generic - Reads 8 bit EEPROM word over I2C interface
+ * @hw: pointer to hardware structure
+ * @byte_offset: EEPROM byte offset to read
+ * @eeprom_data: value read
+ *
+ * Performs byte read operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *eeprom_data)
+{
+ return hw->phy.ops.read_i2c_byte(hw, byte_offset,
+ IXGBE_I2C_EEPROM_DEV_ADDR,
+ eeprom_data);
+}
+
+/**
+ * ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface
+ * @hw: pointer to hardware structure
+ * @byte_offset: EEPROM byte offset to write
+ * @eeprom_data: value to write
+ *
+ * Performs byte write operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 eeprom_data)
+{
+ return hw->phy.ops.write_i2c_byte(hw, byte_offset,
+ IXGBE_I2C_EEPROM_DEV_ADDR,
+ eeprom_data);
+}
+
+/**
+ * ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @data: value read
+ *
+ * Performs byte read operation to SFP module's EEPROM over I2C interface at
+ * a specified deivce address.
+ **/
+s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data)
+{
+ s32 status = 0;
+ u32 max_retry = 1;
+ u32 retry = 0;
+ bool nack = 1;
+
+ do {
+ ixgbe_i2c_start(hw);
+
+ /* Device Address and write indication */
+ status = ixgbe_clock_out_i2c_byte(hw, dev_addr);
+ if (status != 0)
+ goto fail;
+
+ status = ixgbe_get_i2c_ack(hw);
+ if (status != 0)
+ goto fail;
+
+ status = ixgbe_clock_out_i2c_byte(hw, byte_offset);
+ if (status != 0)
+ goto fail;
+
+ status = ixgbe_get_i2c_ack(hw);
+ if (status != 0)
+ goto fail;
+
+ ixgbe_i2c_start(hw);
+
+ /* Device Address and read indication */
+ status = ixgbe_clock_out_i2c_byte(hw, (dev_addr | 0x1));
+ if (status != 0)
+ goto fail;
+
+ status = ixgbe_get_i2c_ack(hw);
+ if (status != 0)
+ goto fail;
+
+ status = ixgbe_clock_in_i2c_byte(hw, data);
+ if (status != 0)
+ goto fail;
+
+ status = ixgbe_clock_out_i2c_bit(hw, nack);
+ if (status != 0)
+ goto fail;
+
+ ixgbe_i2c_stop(hw);
+ break;
+
+fail:
+ ixgbe_i2c_bus_clear(hw);
+ retry++;
+ if (retry < max_retry)
+ hw_dbg(hw, "I2C byte read error - Retrying.\n");
+ else
+ hw_dbg(hw, "I2C byte read error.\n");
+
+ } while (retry < max_retry);
+
+ return status;
+}
+
+/**
+ * ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @data: value to write
+ *
+ * Performs byte write operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data)
+{
+ s32 status = 0;
+ u32 max_retry = 1;
+ u32 retry = 0;
+
+ do {
+ ixgbe_i2c_start(hw);
+
+ status = ixgbe_clock_out_i2c_byte(hw, dev_addr);
+ if (status != 0)
+ goto fail;
+
+ status = ixgbe_get_i2c_ack(hw);
+ if (status != 0)
+ goto fail;
+
+ status = ixgbe_clock_out_i2c_byte(hw, byte_offset);
+ if (status != 0)
+ goto fail;
+
+ status = ixgbe_get_i2c_ack(hw);
+ if (status != 0)
+ goto fail;
+
+ status = ixgbe_clock_out_i2c_byte(hw, data);
+ if (status != 0)
+ goto fail;
+
+ status = ixgbe_get_i2c_ack(hw);
+ if (status != 0)
+ goto fail;
+
+ ixgbe_i2c_stop(hw);
+ break;
+
+fail:
+ ixgbe_i2c_bus_clear(hw);
+ retry++;
+ if (retry < max_retry)
+ hw_dbg(hw, "I2C byte write error - Retrying.\n");
+ else
+ hw_dbg(hw, "I2C byte write error.\n");
+ } while (retry < max_retry);
+
+ return status;
+}
+
+/**
+ * ixgbe_i2c_start - Sets I2C start condition
+ * @hw: pointer to hardware structure
+ *
+ * Sets I2C start condition (High -> Low on SDA while SCL is High)
+ **/
+static void ixgbe_i2c_start(struct ixgbe_hw *hw)
+{
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
+
+ /* Start condition must begin with data and clock high */
+ ixgbe_set_i2c_data(hw, &i2cctl, 1);
+ ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+ /* Setup time for start condition (4.7us) */
+ udelay(IXGBE_I2C_T_SU_STA);
+
+ ixgbe_set_i2c_data(hw, &i2cctl, 0);
+
+ /* Hold time for start condition (4us) */
+ udelay(IXGBE_I2C_T_HD_STA);
+
+ ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+ /* Minimum low period of clock is 4.7 us */
+ udelay(IXGBE_I2C_T_LOW);
+
+}
+
+/**
+ * ixgbe_i2c_stop - Sets I2C stop condition
+ * @hw: pointer to hardware structure
+ *
+ * Sets I2C stop condition (Low -> High on SDA while SCL is High)
+ **/
+static void ixgbe_i2c_stop(struct ixgbe_hw *hw)
+{
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
+
+ /* Stop condition must begin with data low and clock high */
+ ixgbe_set_i2c_data(hw, &i2cctl, 0);
+ ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+ /* Setup time for stop condition (4us) */
+ udelay(IXGBE_I2C_T_SU_STO);
+
+ ixgbe_set_i2c_data(hw, &i2cctl, 1);
+
+ /* bus free time between stop and start (4.7us)*/
+ udelay(IXGBE_I2C_T_BUF);
+}
+
+/**
+ * ixgbe_clock_in_i2c_byte - Clocks in one byte via I2C
+ * @hw: pointer to hardware structure
+ * @data: data byte to clock in
+ *
+ * Clocks in one byte data via I2C data/clock
+ **/
+static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data)
+{
+ s32 status = 0;
+ s32 i;
+ bool bit = 0;
+
+ for (i = 7; i >= 0; i--) {
+ status = ixgbe_clock_in_i2c_bit(hw, &bit);
+ *data |= bit << i;
+
+ if (status != 0)
+ break;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_clock_out_i2c_byte - Clocks out one byte via I2C
+ * @hw: pointer to hardware structure
+ * @data: data byte clocked out
+ *
+ * Clocks out one byte data via I2C data/clock
+ **/
+static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data)
+{
+ s32 status = 0;
+ s32 i;
+ u32 i2cctl;
+ bool bit = 0;
+
+ for (i = 7; i >= 0; i--) {
+ bit = (data >> i) & 0x1;
+ status = ixgbe_clock_out_i2c_bit(hw, bit);
+
+ if (status != 0)
+ break;
+ }
+
+ /* Release SDA line (set high) */
+ i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
+ i2cctl |= IXGBE_I2C_DATA_OUT;
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, i2cctl);
+
+ return status;
+}
+
+/**
+ * ixgbe_get_i2c_ack - Polls for I2C ACK
+ * @hw: pointer to hardware structure
+ *
+ * Clocks in/out one bit via I2C data/clock
+ **/
+static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u32 i = 0;
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
+ u32 timeout = 10;
+ bool ack = 1;
+
+ status = ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+ if (status != 0)
+ goto out;
+
+ /* Minimum high period of clock is 4us */
+ udelay(IXGBE_I2C_T_HIGH);
+
+ /* Poll for ACK. Note that ACK in I2C spec is
+ * transition from 1 to 0 */
+ for (i = 0; i < timeout; i++) {
+ i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
+ ack = ixgbe_get_i2c_data(&i2cctl);
+
+ udelay(1);
+ if (ack == 0)
+ break;
+ }
+
+ if (ack == 1) {
+ hw_dbg(hw, "I2C ack was not received.\n");
+ status = IXGBE_ERR_I2C;
+ }
+
+ ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+ /* Minimum low period of clock is 4.7 us */
+ udelay(IXGBE_I2C_T_LOW);
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_clock_in_i2c_bit - Clocks in one bit via I2C data/clock
+ * @hw: pointer to hardware structure
+ * @data: read data value
+ *
+ * Clocks in one bit via I2C data/clock
+ **/
+static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data)
+{
+ s32 status;
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
+
+ status = ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+ /* Minimum high period of clock is 4us */
+ udelay(IXGBE_I2C_T_HIGH);
+
+ i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
+ *data = ixgbe_get_i2c_data(&i2cctl);
+
+ ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+ /* Minimum low period of clock is 4.7 us */
+ udelay(IXGBE_I2C_T_LOW);
+
+ return status;
+}
+
+/**
+ * ixgbe_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock
+ * @hw: pointer to hardware structure
+ * @data: data value to write
+ *
+ * Clocks out one bit via I2C data/clock
+ **/
+static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data)
+{
+ s32 status;
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
+
+ status = ixgbe_set_i2c_data(hw, &i2cctl, data);
+ if (status == 0) {
+ status = ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+ /* Minimum high period of clock is 4us */
+ udelay(IXGBE_I2C_T_HIGH);
+
+ ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+ /* Minimum low period of clock is 4.7 us.
+ * This also takes care of the data hold time.
+ */
+ udelay(IXGBE_I2C_T_LOW);
+ } else {
+ status = IXGBE_ERR_I2C;
+ hw_dbg(hw, "I2C data was not set to %X\n", data);
+ }
+
+ return status;
+}
+/**
+ * ixgbe_raise_i2c_clk - Raises the I2C SCL clock
+ * @hw: pointer to hardware structure
+ * @i2cctl: Current value of I2CCTL register
+ *
+ * Raises the I2C clock line '0'->'1'
+ **/
+static s32 ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
+{
+ s32 status = 0;
+
+ *i2cctl |= IXGBE_I2C_CLK_OUT;
+
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl);
+
+ /* SCL rise time (1000ns) */
+ udelay(IXGBE_I2C_T_RISE);
+
+ return status;
+}
+
+/**
+ * ixgbe_lower_i2c_clk - Lowers the I2C SCL clock
+ * @hw: pointer to hardware structure
+ * @i2cctl: Current value of I2CCTL register
+ *
+ * Lowers the I2C clock line '1'->'0'
+ **/
+static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
+{
+
+ *i2cctl &= ~IXGBE_I2C_CLK_OUT;
+
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl);
+
+ /* SCL fall time (300ns) */
+ udelay(IXGBE_I2C_T_FALL);
+}
+
+/**
+ * ixgbe_set_i2c_data - Sets the I2C data bit
+ * @hw: pointer to hardware structure
+ * @i2cctl: Current value of I2CCTL register
+ * @data: I2C data value (0 or 1) to set
+ *
+ * Sets the I2C data bit
+ **/
+static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data)
+{
+ s32 status = 0;
+
+ if (data)
+ *i2cctl |= IXGBE_I2C_DATA_OUT;
+ else
+ *i2cctl &= ~IXGBE_I2C_DATA_OUT;
+
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl);
+
+ /* Data rise/fall (1000ns/300ns) and set-up time (250ns) */
+ udelay(IXGBE_I2C_T_RISE + IXGBE_I2C_T_FALL + IXGBE_I2C_T_SU_DATA);
+
+ /* Verify data was set correctly */
+ *i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
+ if (data != ixgbe_get_i2c_data(i2cctl)) {
+ status = IXGBE_ERR_I2C;
+ hw_dbg(hw, "Error - I2C data was not set to %X.\n", data);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_get_i2c_data - Reads the I2C SDA data bit
+ * @hw: pointer to hardware structure
+ * @i2cctl: Current value of I2CCTL register
+ *
+ * Returns the I2C data bit value
+ **/
+static bool ixgbe_get_i2c_data(u32 *i2cctl)
+{
+ bool data;
+
+ if (*i2cctl & IXGBE_I2C_DATA_IN)
+ data = 1;
+ else
+ data = 0;
+
+ return data;
+}
+
+/**
+ * ixgbe_i2c_bus_clear - Clears the I2C bus
+ * @hw: pointer to hardware structure
+ *
+ * Clears the I2C bus by sending nine clock pulses.
+ * Used when data line is stuck low.
+ **/
+static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw)
+{
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
+ u32 i;
+
+ ixgbe_set_i2c_data(hw, &i2cctl, 1);
+
+ for (i = 0; i < 9; i++) {
+ ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+ /* Min high period of clock is 4us */
+ udelay(IXGBE_I2C_T_HIGH);
+
+ ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+ /* Min low period of clock is 4.7us*/
+ udelay(IXGBE_I2C_T_LOW);
+ }
+
+ /* Put the i2c bus back to default state */
+ ixgbe_i2c_stop(hw);
+}
+
+/**
* ixgbe_check_phy_link_tnx - Determine link and speed status
* @hw: pointer to hardware structure
*
@@ -54,14 +54,15 @@
#define IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS 0x3
/* Bit-shift macros */
-#define IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT 12
-#define IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT 8
-#define IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT 4
+#define IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT 24
+#define IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT 16
+#define IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT 8
/* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */
#define IXGBE_SFF_VENDOR_OUI_TYCO 0x00407600
#define IXGBE_SFF_VENDOR_OUI_FTL 0x00906500
#define IXGBE_SFF_VENDOR_OUI_AVAGO 0x00176A00
+#define IXGBE_SFF_VENDOR_OUI_INTEL 0x001B2100
/* I2C SDA and SCL timing parameters for standard mode */
#define IXGBE_I2C_T_HD_STA 4
@@ -101,5 +102,12 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw);
s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
u16 *list_offset,
u16 *data_offset);
-
+s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data);
+s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data);
+s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *eeprom_data);
+s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 eeprom_data);
#endif /* _IXGBE_PHY_H_ */
@@ -45,6 +45,9 @@
#define IXGBE_DEV_ID_82598_DA_DUAL_PORT 0x10F1
#define IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM 0x10E1
#define IXGBE_DEV_ID_82598EB_XF_LR 0x10F4
+#define IXGBE_DEV_ID_82599 0x10D8
+#define IXGBE_DEV_ID_82599_KX4 0x10F7
+#define IXGBE_DEV_ID_82599_SFP 0x10FB
/* General Registers */
#define IXGBE_CTRL 0x00000
@@ -52,9 +55,12 @@
#define IXGBE_CTRL_EXT 0x00018
#define IXGBE_ESDP 0x00020
#define IXGBE_EODSDP 0x00028
+#define IXGBE_I2CCTL 0x00028
#define IXGBE_LEDCTL 0x00200
#define IXGBE_FRTIMER 0x00048
#define IXGBE_TCPTIMER 0x0004C
+#define IXGBE_CORESPARE 0x00600
+#define IXGBE_EXVET 0x05078
/* NVM Registers */
#define IXGBE_EEC 0x10010
@@ -68,6 +74,19 @@
#define IXGBE_FLOP 0x1013C
#define IXGBE_GRC 0x10200
+/* General Receive Control */
+#define IXGBE_GRC_MNG 0x00000001 /* Manageability Enable */
+#define IXGBE_GRC_APME 0x00000002 /* Advanced Power Management Enable */
+
+#define IXGBE_VPDDIAG0 0x10204
+#define IXGBE_VPDDIAG1 0x10208
+
+/* I2CCTL Bit Masks */
+#define IXGBE_I2C_CLK_IN 0x00000001
+#define IXGBE_I2C_CLK_OUT 0x00000002
+#define IXGBE_I2C_DATA_IN 0x00000004
+#define IXGBE_I2C_DATA_OUT 0x00000008
+
/* Interrupt Registers */
#define IXGBE_EICR 0x00800
#define IXGBE_EICS 0x00808
@@ -75,28 +94,54 @@
#define IXGBE_EIMC 0x00888
#define IXGBE_EIAC 0x00810
#define IXGBE_EIAM 0x00890
-#define IXGBE_EITR(_i) (((_i) <= 23) ? (0x00820 + ((_i) * 4)) : (0x012300 + ((_i) * 4)))
+#define IXGBE_EICS_EX(_i) (0x00A90 + (_i) * 4)
+#define IXGBE_EIMS_EX(_i) (0x00AA0 + (_i) * 4)
+#define IXGBE_EIMC_EX(_i) (0x00AB0 + (_i) * 4)
+#define IXGBE_EIAM_EX(_i) (0x00AD0 + (_i) * 4)
+#define IXGBE_EITR(_i) (((_i) <= 23) ? (0x00820 + ((_i) * 4)) : \
+ (0x012300 + (((_i) - 24) * 4)))
+#define IXGBE_EITR_ITR_INT_MASK 0x00000FFF
+#define IXGBE_EITR_LLI_MOD 0x00008000
+#define IXGBE_EITR_CNT_WDIS 0x80000000
#define IXGBE_IVAR(_i) (0x00900 + ((_i) * 4)) /* 24 at 0x900-0x960 */
+#define IXGBE_IVAR_MISC 0x00A00 /* misc MSI-X interrupt causes */
+#define IXGBE_EITRSEL 0x00894
#define IXGBE_MSIXT 0x00000 /* MSI-X Table. 0x0000 - 0x01C */
#define IXGBE_MSIXPBA 0x02000 /* MSI-X Pending bit array */
#define IXGBE_PBACL(_i) (((_i) == 0) ? (0x11068) : (0x110C0 + ((_i) * 4)))
#define IXGBE_GPIE 0x00898
/* Flow Control Registers */
+#define IXGBE_FCADBUL 0x03210
+#define IXGBE_FCADBUH 0x03214
+#define IXGBE_FCAMACL 0x04328
+#define IXGBE_FCAMACH 0x0432C
+#define IXGBE_FCRTH_82599(_i) (0x03260 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_FCRTL_82599(_i) (0x03220 + ((_i) * 4)) /* 8 of these (0-7) */
#define IXGBE_PFCTOP 0x03008
#define IXGBE_FCTTV(_i) (0x03200 + ((_i) * 4)) /* 4 of these (0-3) */
#define IXGBE_FCRTL(_i) (0x03220 + ((_i) * 8)) /* 8 of these (0-7) */
#define IXGBE_FCRTH(_i) (0x03260 + ((_i) * 8)) /* 8 of these (0-7) */
#define IXGBE_FCRTV 0x032A0
+#define IXGBE_FCCFG 0x03D00
#define IXGBE_TFCS 0x0CE00
/* Receive DMA Registers */
-#define IXGBE_RDBAL(_i) (((_i) < 64) ? (0x01000 + ((_i) * 0x40)) : (0x0D000 + ((_i - 64) * 0x40)))
-#define IXGBE_RDBAH(_i) (((_i) < 64) ? (0x01004 + ((_i) * 0x40)) : (0x0D004 + ((_i - 64) * 0x40)))
-#define IXGBE_RDLEN(_i) (((_i) < 64) ? (0x01008 + ((_i) * 0x40)) : (0x0D008 + ((_i - 64) * 0x40)))
-#define IXGBE_RDH(_i) (((_i) < 64) ? (0x01010 + ((_i) * 0x40)) : (0x0D010 + ((_i - 64) * 0x40)))
-#define IXGBE_RDT(_i) (((_i) < 64) ? (0x01018 + ((_i) * 0x40)) : (0x0D018 + ((_i - 64) * 0x40)))
-#define IXGBE_RXDCTL(_i) (((_i) < 64) ? (0x01028 + ((_i) * 0x40)) : (0x0D028 + ((_i - 64) * 0x40)))
+#define IXGBE_RDBAL(_i) (((_i) < 64) ? (0x01000 + ((_i) * 0x40)) : \
+ (0x0D000 + ((_i - 64) * 0x40)))
+#define IXGBE_RDBAH(_i) (((_i) < 64) ? (0x01004 + ((_i) * 0x40)) : \
+ (0x0D004 + ((_i - 64) * 0x40)))
+#define IXGBE_RDLEN(_i) (((_i) < 64) ? (0x01008 + ((_i) * 0x40)) : \
+ (0x0D008 + ((_i - 64) * 0x40)))
+#define IXGBE_RDH(_i) (((_i) < 64) ? (0x01010 + ((_i) * 0x40)) : \
+ (0x0D010 + ((_i - 64) * 0x40)))
+#define IXGBE_RDT(_i) (((_i) < 64) ? (0x01018 + ((_i) * 0x40)) : \
+ (0x0D018 + ((_i - 64) * 0x40)))
+#define IXGBE_RXDCTL(_i) (((_i) < 64) ? (0x01028 + ((_i) * 0x40)) : \
+ (0x0D028 + ((_i - 64) * 0x40)))
+#define IXGBE_RDDCC 0x02F20
+#define IXGBE_RXMEMWRAP 0x03190
+#define IXGBE_STARCTRL 0x03024
/*
* Split and Replication Receive Control Registers
* 00-15 : 0x02100 + n*4
@@ -129,10 +174,15 @@
#define IXGBE_DRECCCTL_DISABLE 0
/* Multicast Table Array - 128 entries */
#define IXGBE_MTA(_i) (0x05200 + ((_i) * 4))
-#define IXGBE_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : (0x0A200 + ((_i) * 8)))
-#define IXGBE_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : (0x0A204 + ((_i) * 8)))
+#define IXGBE_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
+ (0x0A200 + ((_i) * 8)))
+#define IXGBE_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
+ (0x0A204 + ((_i) * 8)))
+#define IXGBE_MPSAR_LO(_i) (0x0A600 + ((_i) * 8))
+#define IXGBE_MPSAR_HI(_i) (0x0A604 + ((_i) * 8))
/* Packet split receive type */
-#define IXGBE_PSRTYPE(_i) (((_i) <= 15) ? (0x05480 + ((_i) * 4)) : (0x0EA00 + ((_i) * 4)))
+#define IXGBE_PSRTYPE(_i) (((_i) <= 15) ? (0x05480 + ((_i) * 4)) : \
+ (0x0EA00 + ((_i) * 4)))
/* array of 4096 1-bit vlan filters */
#define IXGBE_VFTA(_i) (0x0A000 + ((_i) * 4))
/*array of 4096 4-bit vlan vmdq indices */
@@ -141,6 +191,28 @@
#define IXGBE_VLNCTRL 0x05088
#define IXGBE_MCSTCTRL 0x05090
#define IXGBE_MRQC 0x05818
+#define IXGBE_SAQF(_i) (0x0E000 + ((_i) * 4)) /* Source Address Queue Filter */
+#define IXGBE_DAQF(_i) (0x0E200 + ((_i) * 4)) /* Dest. Address Queue Filter */
+#define IXGBE_SDPQF(_i) (0x0E400 + ((_i) * 4)) /* Src Dest. Addr Queue Filter */
+#define IXGBE_FTQF(_i) (0x0E600 + ((_i) * 4)) /* Five Tuple Queue Filter */
+#define IXGBE_ETQF(_i) (0x05128 + ((_i) * 4)) /* EType Queue Filter */
+#define IXGBE_ETQS(_i) (0x0EC00 + ((_i) * 4)) /* EType Queue Select */
+#define IXGBE_SYNQF 0x0EC30 /* SYN Packet Queue Filter */
+#define IXGBE_RQTC 0x0EC70
+#define IXGBE_MTQC 0x08120
+#define IXGBE_VLVF(_i) (0x0F100 + ((_i) * 4)) /* 64 of these (0-63) */
+#define IXGBE_VLVFB(_i) (0x0F200 + ((_i) * 4)) /* 128 of these (0-127) */
+#define IXGBE_VT_CTL 0x051B0
+#define IXGBE_VFRE(_i) (0x051E0 + ((_i) * 4))
+#define IXGBE_VFTE(_i) (0x08110 + ((_i) * 4))
+#define IXGBE_QDE 0x2F04
+#define IXGBE_VMOLR(_i) (0x0F000 + ((_i) * 4)) /* 64 total */
+#define IXGBE_UTA(_i) (0x0F400 + ((_i) * 4))
+#define IXGBE_VMRCTL(_i) (0x0F600 + ((_i) * 4))
+#define IXGBE_VMRVLAN(_i) (0x0F610 + ((_i) * 4))
+#define IXGBE_VMRVM(_i) (0x0F630 + ((_i) * 4))
+#define IXGBE_L34T_IMIR(_i) (0x0E800 + ((_i) * 4)) /*128 of these (0-127)*/
+#define IXGBE_LLITHRESH 0x0EC90
#define IXGBE_IMIR(_i) (0x05A80 + ((_i) * 4)) /* 8 of these (0-7) */
#define IXGBE_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* 8 of these (0-7) */
#define IXGBE_IMIRVP 0x05AC0
@@ -148,7 +220,6 @@
#define IXGBE_RETA(_i) (0x05C00 + ((_i) * 4)) /* 32 of these (0-31) */
#define IXGBE_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* 10 of these (0-9) */
-
/* Transmit DMA registers */
#define IXGBE_TDBAL(_i) (0x06000 + ((_i) * 0x40)) /* 32 of these (0-31)*/
#define IXGBE_TDBAH(_i) (0x06004 + ((_i) * 0x40))
@@ -160,7 +231,20 @@
#define IXGBE_TDWBAH(_i) (0x0603C + ((_i) * 0x40))
#define IXGBE_DTXCTL 0x07E00
+#define IXGBE_DMATXCTL 0x04A80
+#define IXGBE_DTXMXSZRQ 0x08100
+#define IXGBE_DTXTCPFLGL 0x04A88
+#define IXGBE_DTXTCPFLGH 0x04A8C
+#define IXGBE_LBDRPEN 0x0CA00
+#define IXGBE_TXPBTHRESH(_i) (0x04950 + ((_i) * 4)) /* 8 of these 0 - 7 */
+
+#define IXGBE_DMATXCTL_TE 0x1 /* Transmit Enable */
+#define IXGBE_DMATXCTL_NS 0x2 /* No Snoop LSO hdr buffer */
+#define IXGBE_DMATXCTL_GDV 0x8 /* Global Double VLAN */
+#define IXGBE_DMATXCTL_VT_SHIFT 16 /* VLAN EtherType */
#define IXGBE_DCA_TXCTRL(_i) (0x07200 + ((_i) * 4)) /* 16 of these (0-15) */
+/* Tx DCA Control register : 128 of these (0-127) */
+#define IXGBE_DCA_TXCTRL_82599(_i) (0x0600C + ((_i) * 0x40))
#define IXGBE_TIPG 0x0CB00
#define IXGBE_TXPBSIZE(_i) (0x0CC00 + ((_i) * 4)) /* 8 of these */
#define IXGBE_MNGTXMAP 0x0CD10
@@ -177,9 +261,69 @@
#define IXGBE_WUPL 0x05900
#define IXGBE_WUPM 0x05A00 /* wake up pkt memory 0x5A00-0x5A7C */
-#define IXGBE_FHFT 0x09000 /* Flex host filter table 9000-93FC */
-
-/* Music registers */
+#define IXGBE_FHFT(_n) (0x09000 + (_n * 0x100)) /* Flex host filter table */
+#define IXGBE_FHFT_EXT(_n) (0x09800 + (_n * 0x100)) /* Ext Flexible Host
+ * Filter Table */
+
+#define IXGBE_FLEXIBLE_FILTER_COUNT_MAX 4
+#define IXGBE_EXT_FLEXIBLE_FILTER_COUNT_MAX 2
+
+/* Each Flexible Filter is at most 128 (0x80) bytes in length */
+#define IXGBE_FLEXIBLE_FILTER_SIZE_MAX 128
+#define IXGBE_FHFT_LENGTH_OFFSET 0xFC /* Length byte in FHFT */
+#define IXGBE_FHFT_LENGTH_MASK 0x0FF /* Length in lower byte */
+
+/* Definitions for power management and wakeup registers */
+/* Wake Up Control */
+#define IXGBE_WUC_PME_EN 0x00000002 /* PME Enable */
+#define IXGBE_WUC_PME_STATUS 0x00000004 /* PME Status */
+#define IXGBE_WUC_ADVD3WUC 0x00000010 /* D3Cold wake up cap. enable*/
+
+/* Wake Up Filter Control */
+#define IXGBE_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+#define IXGBE_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
+#define IXGBE_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
+#define IXGBE_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
+#define IXGBE_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
+#define IXGBE_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
+#define IXGBE_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */
+#define IXGBE_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */
+#define IXGBE_WUFC_MNG 0x00000100 /* Directed Mgmt Packet Wakeup Enable */
+
+#define IXGBE_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */
+#define IXGBE_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */
+#define IXGBE_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */
+#define IXGBE_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */
+#define IXGBE_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */
+#define IXGBE_WUFC_FLX4 0x00100000 /* Flexible Filter 4 Enable */
+#define IXGBE_WUFC_FLX5 0x00200000 /* Flexible Filter 5 Enable */
+#define IXGBE_WUFC_FLX_FILTERS 0x000F0000 /* Mask for 4 flex filters */
+#define IXGBE_WUFC_EXT_FLX_FILTERS 0x00300000 /* Mask for Ext. flex filters */
+#define IXGBE_WUFC_ALL_FILTERS 0x003F00FF /* Mask for all 6 wakeup filters*/
+#define IXGBE_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */
+
+/* Wake Up Status */
+#define IXGBE_WUS_LNKC IXGBE_WUFC_LNKC
+#define IXGBE_WUS_MAG IXGBE_WUFC_MAG
+#define IXGBE_WUS_EX IXGBE_WUFC_EX
+#define IXGBE_WUS_MC IXGBE_WUFC_MC
+#define IXGBE_WUS_BC IXGBE_WUFC_BC
+#define IXGBE_WUS_ARP IXGBE_WUFC_ARP
+#define IXGBE_WUS_IPV4 IXGBE_WUFC_IPV4
+#define IXGBE_WUS_IPV6 IXGBE_WUFC_IPV6
+#define IXGBE_WUS_MNG IXGBE_WUFC_MNG
+#define IXGBE_WUS_FLX0 IXGBE_WUFC_FLX0
+#define IXGBE_WUS_FLX1 IXGBE_WUFC_FLX1
+#define IXGBE_WUS_FLX2 IXGBE_WUFC_FLX2
+#define IXGBE_WUS_FLX3 IXGBE_WUFC_FLX3
+#define IXGBE_WUS_FLX4 IXGBE_WUFC_FLX4
+#define IXGBE_WUS_FLX5 IXGBE_WUFC_FLX5
+#define IXGBE_WUS_FLX_FILTERS IXGBE_WUFC_FLX_FILTERS
+
+/* Wake Up Packet Length */
+#define IXGBE_WUPL_LENGTH_MASK 0xFFFF
+
+/* DCB registers */
#define IXGBE_RMCS 0x03D00
#define IXGBE_DPMCS 0x07F40
#define IXGBE_PDPMCS 0x0CD00
@@ -192,6 +336,122 @@
#define IXGBE_TDPT2TCSR(_i) (0x0CD40 + ((_i) * 4)) /* 8 of these (0-7) */
+/* Security Control Registers */
+#define IXGBE_SECTXCTRL 0x08800
+#define IXGBE_SECTXSTAT 0x08804
+#define IXGBE_SECTXBUFFAF 0x08808
+#define IXGBE_SECTXMINIFG 0x08810
+#define IXGBE_SECTXSTAT 0x08804
+#define IXGBE_SECRXCTRL 0x08D00
+#define IXGBE_SECRXSTAT 0x08D04
+
+/* Security Bit Fields and Masks */
+#define IXGBE_SECTXCTRL_SECTX_DIS 0x00000001
+#define IXGBE_SECTXCTRL_TX_DIS 0x00000002
+#define IXGBE_SECTXCTRL_STORE_FORWARD 0x00000004
+
+#define IXGBE_SECTXSTAT_SECTX_RDY 0x00000001
+#define IXGBE_SECTXSTAT_ECC_TXERR 0x00000002
+
+#define IXGBE_SECRXCTRL_SECRX_DIS 0x00000001
+#define IXGBE_SECRXCTRL_RX_DIS 0x00000002
+
+#define IXGBE_SECRXSTAT_SECRX_RDY 0x00000001
+#define IXGBE_SECRXSTAT_ECC_RXERR 0x00000002
+
+/* LinkSec (MacSec) Registers */
+#define IXGBE_LSECTXCAP 0x08A00
+#define IXGBE_LSECRXCAP 0x08F00
+#define IXGBE_LSECTXCTRL 0x08A04
+#define IXGBE_LSECTXSCL 0x08A08 /* SCI Low */
+#define IXGBE_LSECTXSCH 0x08A0C /* SCI High */
+#define IXGBE_LSECTXSA 0x08A10
+#define IXGBE_LSECTXPN0 0x08A14
+#define IXGBE_LSECTXPN1 0x08A18
+#define IXGBE_LSECTXKEY0(_n) (0x08A1C + (4 * (_n))) /* 4 of these (0-3) */
+#define IXGBE_LSECTXKEY1(_n) (0x08A2C + (4 * (_n))) /* 4 of these (0-3) */
+#define IXGBE_LSECRXCTRL 0x08F04
+#define IXGBE_LSECRXSCL 0x08F08
+#define IXGBE_LSECRXSCH 0x08F0C
+#define IXGBE_LSECRXSA(_i) (0x08F10 + (4 * (_i))) /* 2 of these (0-1) */
+#define IXGBE_LSECRXPN(_i) (0x08F18 + (4 * (_i))) /* 2 of these (0-1) */
+#define IXGBE_LSECRXKEY(_n, _m) (0x08F20 + ((0x10 * (_n)) + (4 * (_m))))
+#define IXGBE_LSECTXUT 0x08A3C /* OutPktsUntagged */
+#define IXGBE_LSECTXPKTE 0x08A40 /* OutPktsEncrypted */
+#define IXGBE_LSECTXPKTP 0x08A44 /* OutPktsProtected */
+#define IXGBE_LSECTXOCTE 0x08A48 /* OutOctetsEncrypted */
+#define IXGBE_LSECTXOCTP 0x08A4C /* OutOctetsProtected */
+#define IXGBE_LSECRXUT 0x08F40 /* InPktsUntagged/InPktsNoTag */
+#define IXGBE_LSECRXOCTD 0x08F44 /* InOctetsDecrypted */
+#define IXGBE_LSECRXOCTV 0x08F48 /* InOctetsValidated */
+#define IXGBE_LSECRXBAD 0x08F4C /* InPktsBadTag */
+#define IXGBE_LSECRXNOSCI 0x08F50 /* InPktsNoSci */
+#define IXGBE_LSECRXUNSCI 0x08F54 /* InPktsUnknownSci */
+#define IXGBE_LSECRXUNCH 0x08F58 /* InPktsUnchecked */
+#define IXGBE_LSECRXDELAY 0x08F5C /* InPktsDelayed */
+#define IXGBE_LSECRXLATE 0x08F60 /* InPktsLate */
+#define IXGBE_LSECRXOK(_n) (0x08F64 + (0x04 * (_n))) /* InPktsOk */
+#define IXGBE_LSECRXINV(_n) (0x08F6C + (0x04 * (_n))) /* InPktsInvalid */
+#define IXGBE_LSECRXNV(_n) (0x08F74 + (0x04 * (_n))) /* InPktsNotValid */
+#define IXGBE_LSECRXUNSA 0x08F7C /* InPktsUnusedSa */
+#define IXGBE_LSECRXNUSA 0x08F80 /* InPktsNotUsingSa */
+
+/* LinkSec (MacSec) Bit Fields and Masks */
+#define IXGBE_LSECTXCAP_SUM_MASK 0x00FF0000
+#define IXGBE_LSECTXCAP_SUM_SHIFT 16
+#define IXGBE_LSECRXCAP_SUM_MASK 0x00FF0000
+#define IXGBE_LSECRXCAP_SUM_SHIFT 16
+
+#define IXGBE_LSECTXCTRL_EN_MASK 0x00000003
+#define IXGBE_LSECTXCTRL_DISABLE 0x0
+#define IXGBE_LSECTXCTRL_AUTH 0x1
+#define IXGBE_LSECTXCTRL_AUTH_ENCRYPT 0x2
+#define IXGBE_LSECTXCTRL_AISCI 0x00000020
+#define IXGBE_LSECTXCTRL_PNTHRSH_MASK 0xFFFFFF00
+#define IXGBE_LSECTXCTRL_RSV_MASK 0x000000D8
+
+#define IXGBE_LSECRXCTRL_EN_MASK 0x0000000C
+#define IXGBE_LSECRXCTRL_EN_SHIFT 2
+#define IXGBE_LSECRXCTRL_DISABLE 0x0
+#define IXGBE_LSECRXCTRL_CHECK 0x1
+#define IXGBE_LSECRXCTRL_STRICT 0x2
+#define IXGBE_LSECRXCTRL_DROP 0x3
+#define IXGBE_LSECRXCTRL_PLSH 0x00000040
+#define IXGBE_LSECRXCTRL_RP 0x00000080
+#define IXGBE_LSECRXCTRL_RSV_MASK 0xFFFFFF33
+
+/* IpSec Registers */
+#define IXGBE_IPSTXIDX 0x08900
+#define IXGBE_IPSTXSALT 0x08904
+#define IXGBE_IPSTXKEY(_i) (0x08908 + (4 * (_i))) /* 4 of these (0-3) */
+#define IXGBE_IPSRXIDX 0x08E00
+#define IXGBE_IPSRXIPADDR(_i) (0x08E04 + (4 * (_i))) /* 4 of these (0-3) */
+#define IXGBE_IPSRXSPI 0x08E14
+#define IXGBE_IPSRXIPIDX 0x08E18
+#define IXGBE_IPSRXKEY(_i) (0x08E1C + (4 * (_i))) /* 4 of these (0-3) */
+#define IXGBE_IPSRXSALT 0x08E2C
+#define IXGBE_IPSRXMOD 0x08E30
+
+#define IXGBE_SECTXCTRL_STORE_FORWARD_ENABLE 0x4
+
+/* DCB registers */
+#define IXGBE_RTRPCS 0x02430
+#define IXGBE_RTTDCS 0x04900
+#define IXGBE_RTTPCS 0x0CD00
+#define IXGBE_RTRUP2TC 0x03020
+#define IXGBE_RTTUP2TC 0x0C800
+#define IXGBE_RTRPT4C(_i) (0x02140 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RTRPT4S(_i) (0x02160 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RTTDT2C(_i) (0x04910 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RTTDT2S(_i) (0x04930 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RTTPT2C(_i) (0x0CD20 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RTTPT2S(_i) (0x0CD40 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RTTDQSEL 0x04904
+#define IXGBE_RTTDT1C 0x04908
+#define IXGBE_RTTDT1S 0x0490C
+#define IXGBE_RTTDTECC 0x04990
+#define IXGBE_RTTDTECC_NO_BCN 0x00000100
+#define IXGBE_RTTBCNRC 0x04984
/* Stats registers */
#define IXGBE_CRCERRS 0x04000
@@ -206,6 +466,11 @@
#define IXGBE_LXONRXC 0x0CF60
#define IXGBE_LXOFFTXC 0x03F68
#define IXGBE_LXOFFRXC 0x0CF68
+#define IXGBE_LXONRXCNT 0x041A4
+#define IXGBE_LXOFFRXCNT 0x041A8
+#define IXGBE_PXONRXCNT(_i) (0x04140 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_PXOFFRXCNT(_i) (0x04160 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_PXON2OFFCNT(_i) (0x03240 + ((_i) * 4)) /* 8 of these */
#define IXGBE_PXONTXC(_i) (0x03F00 + ((_i) * 4)) /* 8 of these 3F00-3F1C*/
#define IXGBE_PXONRXC(_i) (0x0CF00 + ((_i) * 4)) /* 8 of these CF00-CF1C*/
#define IXGBE_PXOFFTXC(_i) (0x03F20 + ((_i) * 4)) /* 8 of these 3F20-3F3C*/
@@ -245,14 +510,20 @@
#define IXGBE_MPTC 0x040F0
#define IXGBE_BPTC 0x040F4
#define IXGBE_XEC 0x04120
+#define IXGBE_SSVPC 0x08780
-#define IXGBE_RQSMR(_i) (0x02300 + ((_i) * 4)) /* 16 of these */
-#define IXGBE_TQSMR(_i) (((_i) <= 7) ? (0x07300 + ((_i) * 4)) : (0x08600 + ((_i) * 4)))
+#define IXGBE_RQSMR(_i) (0x02300 + ((_i) * 4))
+#define IXGBE_TQSMR(_i) (((_i) <= 7) ? (0x07300 + ((_i) * 4)) : \
+ (0x08600 + ((_i) * 4)))
+#define IXGBE_TQSM(_i) (0x08600 + ((_i) * 4))
#define IXGBE_QPRC(_i) (0x01030 + ((_i) * 0x40)) /* 16 of these */
#define IXGBE_QPTC(_i) (0x06030 + ((_i) * 0x40)) /* 16 of these */
#define IXGBE_QBRC(_i) (0x01034 + ((_i) * 0x40)) /* 16 of these */
#define IXGBE_QBTC(_i) (0x06034 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QPRDC(_i) (0x01430 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QBTC_L(_i) (0x08700 + ((_i) * 0x8)) /* 16 of these */
+#define IXGBE_QBTC_H(_i) (0x08704 + ((_i) * 0x8)) /* 16 of these */
/* Management */
#define IXGBE_MAVTV(_i) (0x05010 + ((_i) * 4)) /* 8 of these (0-7) */
@@ -265,6 +536,9 @@
#define IXGBE_MMAL(_i) (0x05910 + ((_i) * 8)) /* 4 of these (0-3) */
#define IXGBE_MMAH(_i) (0x05914 + ((_i) * 8)) /* 4 of these (0-3) */
#define IXGBE_FTFT 0x09400 /* 0x9400-0x97FC */
+#define IXGBE_METF(_i) (0x05190 + ((_i) * 4)) /* 4 of these (0-3) */
+#define IXGBE_MDEF_EXT(_i) (0x05160 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_LSWFW 0x15014
/* ARC Subsystem registers */
#define IXGBE_HICR 0x15F00
@@ -297,16 +571,65 @@
#define IXGBE_DCA_ID 0x11070
#define IXGBE_DCA_CTRL 0x11074
+/* PCIe registers 82599-specific */
+#define IXGBE_GCR_EXT 0x11050
+#define IXGBE_GSCL_5_82599 0x11030
+#define IXGBE_GSCL_6_82599 0x11034
+#define IXGBE_GSCL_7_82599 0x11038
+#define IXGBE_GSCL_8_82599 0x1103C
+#define IXGBE_PHYADR_82599 0x11040
+#define IXGBE_PHYDAT_82599 0x11044
+#define IXGBE_PHYCTL_82599 0x11048
+#define IXGBE_PBACLR_82599 0x11068
+#define IXGBE_CIAA_82599 0x11088
+#define IXGBE_CIAD_82599 0x1108C
+#define IXGBE_PCIE_DIAG_0_82599 0x11090
+#define IXGBE_PCIE_DIAG_1_82599 0x11094
+#define IXGBE_PCIE_DIAG_2_82599 0x11098
+#define IXGBE_PCIE_DIAG_3_82599 0x1109C
+#define IXGBE_PCIE_DIAG_4_82599 0x110A0
+#define IXGBE_PCIE_DIAG_5_82599 0x110A4
+#define IXGBE_PCIE_DIAG_6_82599 0x110A8
+#define IXGBE_PCIE_DIAG_7_82599 0x110C0
+#define IXGBE_INTRPT_CSR_82599 0x110B0
+#define IXGBE_INTRPT_MASK_82599 0x110B8
+#define IXGBE_CDQ_MBR_82599 0x110B4
+#define IXGBE_MISC_REG_82599 0x110F0
+#define IXGBE_ECC_CTRL_0_82599 0x11100
+#define IXGBE_ECC_CTRL_1_82599 0x11104
+#define IXGBE_ECC_STATUS_82599 0x110E0
+#define IXGBE_BAR_CTRL_82599 0x110F4
+
+/* Time Sync Registers */
+#define IXGBE_TSYNCRXCTL 0x05188 /* Rx Time Sync Control register - RW */
+#define IXGBE_TSYNCTXCTL 0x08C00 /* Tx Time Sync Control register - RW */
+#define IXGBE_RXSTMPL 0x051E8 /* Rx timestamp Low - RO */
+#define IXGBE_RXSTMPH 0x051A4 /* Rx timestamp High - RO */
+#define IXGBE_RXSATRL 0x051A0 /* Rx timestamp attribute low - RO */
+#define IXGBE_RXSATRH 0x051A8 /* Rx timestamp attribute high - RO */
+#define IXGBE_RXMTRL 0x05120 /* RX message type register low - RW */
+#define IXGBE_TXSTMPL 0x08C04 /* Tx timestamp value Low - RO */
+#define IXGBE_TXSTMPH 0x08C08 /* Tx timestamp value High - RO */
+#define IXGBE_SYSTIML 0x08C0C /* System time register Low - RO */
+#define IXGBE_SYSTIMH 0x08C10 /* System time register High - RO */
+#define IXGBE_TIMINCA 0x08C14 /* Increment attributes register - RW */
+#define IXGBE_RXUDP 0x08C1C /* Time Sync Rx UDP Port - RW */
+
/* Diagnostic Registers */
#define IXGBE_RDSTATCTL 0x02C20
#define IXGBE_RDSTAT(_i) (0x02C00 + ((_i) * 4)) /* 0x02C00-0x02C1C */
#define IXGBE_RDHMPN 0x02F08
#define IXGBE_RIC_DW(_i) (0x02F10 + ((_i) * 4))
#define IXGBE_RDPROBE 0x02F20
+#define IXGBE_RDMAM 0x02F30
+#define IXGBE_RDMAD 0x02F34
#define IXGBE_TDSTATCTL 0x07C20
#define IXGBE_TDSTAT(_i) (0x07C00 + ((_i) * 4)) /* 0x07C00 - 0x07C1C */
#define IXGBE_TDHMPN 0x07F08
+#define IXGBE_TDHMPN2 0x082FC
+#define IXGBE_TXDESCIC 0x082CC
#define IXGBE_TIC_DW(_i) (0x07F10 + ((_i) * 4))
+#define IXGBE_TIC_DW2(_i) (0x082B0 + ((_i) * 4))
#define IXGBE_TDPROBE 0x07F20
#define IXGBE_TXBUFCTRL 0x0C600
#define IXGBE_TXBUFDATA0 0x0C610
@@ -334,6 +657,8 @@
#define IXGBE_TXDATARDPTR(_i) (0x0C720 + ((_i) * 4)) /* 8 of these C720-C72C*/
#define IXGBE_TXDESCRDPTR(_i) (0x0C730 + ((_i) * 4)) /* 8 of these C730-C73C*/
#define IXGBE_PCIEECCCTL 0x1106C
+#define IXGBE_PCIEECCCTL0 0x11100
+#define IXGBE_PCIEECCCTL1 0x11104
#define IXGBE_PBTXECC 0x0C300
#define IXGBE_PBRXECC 0x03300
#define IXGBE_GHECCR 0x110B0
@@ -359,24 +684,61 @@
#define IXGBE_MSRWD 0x04260
#define IXGBE_MLADD 0x04264
#define IXGBE_MHADD 0x04268
+#define IXGBE_MAXFRS 0x04268
#define IXGBE_TREG 0x0426C
#define IXGBE_PCSS1 0x04288
#define IXGBE_PCSS2 0x0428C
#define IXGBE_XPCSS 0x04290
+#define IXGBE_MFLCN 0x04294
#define IXGBE_SERDESC 0x04298
#define IXGBE_MACS 0x0429C
#define IXGBE_AUTOC 0x042A0
#define IXGBE_LINKS 0x042A4
+#define IXGBE_LINKS2 0x04324
#define IXGBE_AUTOC2 0x042A8
#define IXGBE_AUTOC3 0x042AC
#define IXGBE_ANLP1 0x042B0
#define IXGBE_ANLP2 0x042B4
#define IXGBE_ATLASCTL 0x04800
+#define IXGBE_MMNGC 0x042D0
+#define IXGBE_ANLPNP1 0x042D4
+#define IXGBE_ANLPNP2 0x042D8
+#define IXGBE_KRPCSFC 0x042E0
+#define IXGBE_KRPCSS 0x042E4
+#define IXGBE_FECS1 0x042E8
+#define IXGBE_FECS2 0x042EC
+#define IXGBE_SMADARCTL 0x14F10
+#define IXGBE_MPVC 0x04318
+#define IXGBE_SGMIIC 0x04314
+
+/* Omer CORECTL */
+#define IXGBE_CORECTL 0x014F00
+/* BARCTRL */
+#define IXGBE_BARCTRL 0x110F4
+#define IXGBE_BARCTRL_FLSIZE 0x0700
+#define IXGBE_BARCTRL_CSRSIZE 0x2000
/* RDRXCTL Bit Masks */
#define IXGBE_RDRXCTL_RDMTS_1_2 0x00000000 /* Rx Desc Min Threshold Size */
+#define IXGBE_RDRXCTL_CRCSTRIP 0x00000002 /* CRC Strip */
#define IXGBE_RDRXCTL_MVMEN 0x00000020
#define IXGBE_RDRXCTL_DMAIDONE 0x00000008 /* DMA init cycle done */
+#define IXGBE_RDRXCTL_AGGDIS 0x00010000 /* Aggregation disable */
+
+/* RQTC Bit Masks and Shifts */
+#define IXGBE_RQTC_SHIFT_TC(_i) ((_i) * 4)
+#define IXGBE_RQTC_TC0_MASK (0x7 << 0)
+#define IXGBE_RQTC_TC1_MASK (0x7 << 4)
+#define IXGBE_RQTC_TC2_MASK (0x7 << 8)
+#define IXGBE_RQTC_TC3_MASK (0x7 << 12)
+#define IXGBE_RQTC_TC4_MASK (0x7 << 16)
+#define IXGBE_RQTC_TC5_MASK (0x7 << 20)
+#define IXGBE_RQTC_TC6_MASK (0x7 << 24)
+#define IXGBE_RQTC_TC7_MASK (0x7 << 28)
+
+/* PSRTYPE.RQPL Bit masks and shift */
+#define IXGBE_PSRTYPE_RQPL_MASK 0x7
+#define IXGBE_PSRTYPE_RQPL_SHIFT 29
/* CTRL Bit Masks */
#define IXGBE_CTRL_GIO_DIS 0x00000004 /* Global IO Master Disable bit */
@@ -391,6 +753,7 @@
#define IXGBE_MHADD_MFS_SHIFT 16
/* Extended Device Control */
+#define IXGBE_CTRL_EXT_PFRSTD 0x00004000 /* Physical Function Reset Done */
#define IXGBE_CTRL_EXT_NS_DIS 0x00010000 /* No Snoop disable */
#define IXGBE_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
#define IXGBE_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
@@ -403,6 +766,8 @@
#define IXGBE_DCA_CTRL_DCA_MODE_CB2 0x02 /* DCA Mode CB2 */
#define IXGBE_DCA_RXCTRL_CPUID_MASK 0x0000001F /* Rx CPUID Mask */
+#define IXGBE_DCA_RXCTRL_CPUID_MASK_82599 0xFF000000 /* Rx CPUID Mask */
+#define IXGBE_DCA_RXCTRL_CPUID_SHIFT_82599 24 /* Rx CPUID Shift */
#define IXGBE_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */
#define IXGBE_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header enable */
#define IXGBE_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload enable */
@@ -411,6 +776,8 @@
#define IXGBE_DCA_RXCTRL_DESC_HSRO_EN (1 << 15) /* DCA Rx Split Header RO */
#define IXGBE_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */
+#define IXGBE_DCA_TXCTRL_CPUID_MASK_82599 0xFF000000 /* Tx CPUID Mask */
+#define IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599 24 /* Tx CPUID Shift */
#define IXGBE_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */
#define IXGBE_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
#define IXGBE_DCA_MAX_QUEUES_82598 16 /* DCA regs only on 16 queues */
@@ -454,6 +821,8 @@
#define IXGBE_ATLAS_PDN_TX_1G_QL_ALL 0xF0
#define IXGBE_ATLAS_PDN_TX_AN_QL_ALL 0xF0
+/* Omer bit masks */
+#define IXGBE_CORECTL_WRITE_CMD 0x00010000
/* Device Type definitions for new protocol MDIO commands */
#define IXGBE_MDIO_PMA_PMD_DEV_TYPE 0x1
@@ -481,8 +850,11 @@
#define IXGBE_MDIO_PHY_SPEED_ABILITY 0x4 /* Speed Ability Reg */
#define IXGBE_MDIO_PHY_SPEED_10G 0x0001 /* 10G capable */
#define IXGBE_MDIO_PHY_SPEED_1G 0x0010 /* 1G capable */
+#define IXGBE_MDIO_PHY_EXT_ABILITY 0xB /* Ext Ability Reg */
+#define IXGBE_MDIO_PHY_10GBASET_ABILITY 0x0004 /* 10GBaseT capable */
+#define IXGBE_MDIO_PHY_1000BASET_ABILITY 0x0020 /* 1000BaseT capable */
-#define IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR 0xC30A /* PHY_XS SDA/SCL Address Reg */
+#define IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR 0xC30A /* PHY_XS SDA/SCL Addr Reg */
#define IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA 0xC30B /* PHY_XS SDA/SCL Data Reg */
#define IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT 0xC30C /* PHY_XS SDA/SCL Status Reg */
@@ -497,7 +869,7 @@
#define IXGBE_PHY_REVISION_MASK 0xFFFFFFF0
#define IXGBE_MAX_PHY_ADDR 32
-/* PHY IDs */
+/* PHY IDs*/
#define TN1010_PHY_ID 0x00A19410
#define TNX_FW_REV 0xB
#define QT2022_PHY_ID 0x0043A400
@@ -517,15 +889,22 @@
#define IXGBE_CONTROL_NL 0x000F
#define IXGBE_CONTROL_EOL_NL 0x0FFF
#define IXGBE_CONTROL_SOL_NL 0x0000
+#define IXGBE_PHY_ENFORCE_INTEL_SFP_OFFSET 0x002C
+#define IXGBE_PHY_ALLOW_ANY_SFP 0x1
/* General purpose Interrupt Enable */
#define IXGBE_SDP0_GPIEN 0x00000001 /* SDP0 */
#define IXGBE_SDP1_GPIEN 0x00000002 /* SDP1 */
+#define IXGBE_SDP2_GPIEN 0x00000004 /* SDP2 */
#define IXGBE_GPIE_MSIX_MODE 0x00000010 /* MSI-X mode */
#define IXGBE_GPIE_OCD 0x00000020 /* Other Clear Disable */
#define IXGBE_GPIE_EIMEN 0x00000040 /* Immediate Interrupt Enable */
#define IXGBE_GPIE_EIAME 0x40000000
#define IXGBE_GPIE_PBA_SUPPORT 0x80000000
+#define IXGBE_GPIE_VTMODE_MASK 0x0000C000 /* VT Mode Mask */
+#define IXGBE_GPIE_VTMODE_16 0x00004000 /* 16 VFs 8 queues per VF */
+#define IXGBE_GPIE_VTMODE_32 0x00008000 /* 32 VFs 4 queues per VF */
+#define IXGBE_GPIE_VTMODE_64 0x0000C000 /* 64 VFs 2 queues per VF */
/* Transmit Flow Control status */
#define IXGBE_TFCS_TXOFF 0x00000001
@@ -566,6 +945,21 @@
#define IXGBE_VMD_CTL_VMDQ_EN 0x00000001
#define IXGBE_VMD_CTL_VMDQ_FILTER 0x00000002
+/* VT_CTL bitmasks */
+#define IXGBE_VT_CTL_DIS_DEFPL 0x20000000 /* disable default pool */
+#define IXGBE_VT_CTL_REPLEN 0x40000000 /* replication enabled */
+#define IXGBE_VT_CTL_VT_ENABLE 0x00000001 /* Enable VT Mode */
+
+/* VMOLR bitmasks */
+#define IXGBE_VMOLR_AUPE 0x01000000 /* accept untagged packets */
+#define IXGBE_VMOLR_ROMPE 0x02000000 /* accept packets in MTA tbl */
+#define IXGBE_VMOLR_ROPE 0x04000000 /* accept packets in UC tbl */
+#define IXGBE_VMOLR_BAM 0x08000000 /* accept broadcast packets */
+#define IXGBE_VMOLR_MPE 0x10000000 /* multicast promiscuous */
+
+/* VFRE bitmask */
+#define IXGBE_VFRE_ENABLE_ALL 0xFFFFFFFF
+
/* RDHMPN and TDHMPN bitmasks */
#define IXGBE_RDHMPN_RDICADDR 0x007FF800
#define IXGBE_RDHMPN_RDICRDREQ 0x00800000
@@ -574,13 +968,39 @@
#define IXGBE_TDHMPN_TDICRDREQ 0x00800000
#define IXGBE_TDHMPN_TDICADDR_SHIFT 11
+#define IXGBE_RDMAM_MEM_SEL_SHIFT 13
+#define IXGBE_RDMAM_DWORD_SHIFT 9
+#define IXGBE_RDMAM_DESC_COMP_FIFO 1
+#define IXGBE_RDMAM_DFC_CMD_FIFO 2
+#define IXGBE_RDMAM_TCN_STATUS_RAM 4
+#define IXGBE_RDMAM_WB_COLL_FIFO 5
+#define IXGBE_RDMAM_QSC_CNT_RAM 6
+#define IXGBE_RDMAM_QSC_QUEUE_CNT 8
+#define IXGBE_RDMAM_QSC_QUEUE_RAM 0xA
+#define IXGBE_RDMAM_DESC_COM_FIFO_RANGE 135
+#define IXGBE_RDMAM_DESC_COM_FIFO_COUNT 4
+#define IXGBE_RDMAM_DFC_CMD_FIFO_RANGE 48
+#define IXGBE_RDMAM_DFC_CMD_FIFO_COUNT 7
+#define IXGBE_RDMAM_TCN_STATUS_RAM_RANGE 256
+#define IXGBE_RDMAM_TCN_STATUS_RAM_COUNT 9
+#define IXGBE_RDMAM_WB_COLL_FIFO_RANGE 8
+#define IXGBE_RDMAM_WB_COLL_FIFO_COUNT 4
+#define IXGBE_RDMAM_QSC_CNT_RAM_RANGE 64
+#define IXGBE_RDMAM_QSC_CNT_RAM_COUNT 4
+#define IXGBE_RDMAM_QSC_QUEUE_CNT_RANGE 32
+#define IXGBE_RDMAM_QSC_QUEUE_CNT_COUNT 4
+#define IXGBE_RDMAM_QSC_QUEUE_RAM_RANGE 128
+#define IXGBE_RDMAM_QSC_QUEUE_RAM_COUNT 8
+
+#define IXGBE_TXDESCIC_READY 0x80000000
+
/* Receive Checksum Control */
#define IXGBE_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */
#define IXGBE_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */
/* FCRTL Bit Masks */
-#define IXGBE_FCRTL_XONE 0x80000000 /* bit 31, XON enable */
-#define IXGBE_FCRTH_FCEN 0x80000000 /* Rx Flow control enable */
+#define IXGBE_FCRTL_XONE 0x80000000 /* XON enable */
+#define IXGBE_FCRTH_FCEN 0x80000000 /* Packet buffer fc enable */
/* PAP bit masks*/
#define IXGBE_PAP_TXPAUSECNT_MASK 0x0000FFFF /* Pause counter mask */
@@ -590,19 +1010,29 @@
/* Receive Arbitration Control: 0 Round Robin, 1 DFP */
#define IXGBE_RMCS_RAC 0x00000004
#define IXGBE_RMCS_DFP IXGBE_RMCS_RAC /* Deficit Fixed Priority ena */
-#define IXGBE_RMCS_TFCE_802_3X 0x00000008 /* Tx Priority flow control ena */
-#define IXGBE_RMCS_TFCE_PRIORITY 0x00000010 /* Tx Priority flow control ena */
+#define IXGBE_RMCS_TFCE_802_3X 0x00000008 /* Tx Priority FC ena */
+#define IXGBE_RMCS_TFCE_PRIORITY 0x00000010 /* Tx Priority FC ena */
#define IXGBE_RMCS_ARBDIS 0x00000040 /* Arbitration disable bit */
+/* FCCFG Bit Masks */
+#define IXGBE_FCCFG_TFCE_802_3X 0x00000008 /* Tx link FC enable */
+#define IXGBE_FCCFG_TFCE_PRIORITY 0x00000010 /* Tx priority FC enable */
/* Interrupt register bitmasks */
/* Extended Interrupt Cause Read */
#define IXGBE_EICR_RTX_QUEUE 0x0000FFFF /* RTx Queue Interrupt */
+#define IXGBE_EICR_FLOW_DIR 0x00010000 /* FDir Exception */
+#define IXGBE_EICR_RX_MISS 0x00020000 /* Packet Buffer Overrun */
+#define IXGBE_EICR_PCI 0x00040000 /* PCI Exception */
+#define IXGBE_EICR_MAILBOX 0x00080000 /* VF to PF Mailbox Interrupt */
#define IXGBE_EICR_LSC 0x00100000 /* Link Status Change */
+#define IXGBE_EICR_LINKSEC 0x00200000 /* PN Threshold */
#define IXGBE_EICR_MNG 0x00400000 /* Manageability Event Interrupt */
#define IXGBE_EICR_GPI_SDP0 0x01000000 /* Gen Purpose Interrupt on SDP0 */
#define IXGBE_EICR_GPI_SDP1 0x02000000 /* Gen Purpose Interrupt on SDP1 */
+#define IXGBE_EICR_GPI_SDP2 0x04000000 /* Gen Purpose Interrupt on SDP2 */
+#define IXGBE_EICR_ECC 0x10000000 /* ECC Error */
#define IXGBE_EICR_PBUR 0x10000000 /* Packet Buffer Handler Error */
#define IXGBE_EICR_DHER 0x20000000 /* Descriptor Handler Error */
#define IXGBE_EICR_TCP_TIMER 0x40000000 /* TCP Timer */
@@ -610,10 +1040,16 @@
/* Extended Interrupt Cause Set */
#define IXGBE_EICS_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
+#define IXGBE_EICS_FLOW_DIR IXGBE_EICR_FLOW_DIR /* FDir Exception */
+#define IXGBE_EICS_RX_MISS IXGBE_EICR_RX_MISS /* Pkt Buffer Overrun */
+#define IXGBE_EICS_PCI IXGBE_EICR_PCI /* PCI Exception */
+#define IXGBE_EICS_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */
#define IXGBE_EICS_LSC IXGBE_EICR_LSC /* Link Status Change */
#define IXGBE_EICS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */
#define IXGBE_EICS_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */
#define IXGBE_EICS_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */
+#define IXGBE_EICS_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */
+#define IXGBE_EICS_ECC IXGBE_EICR_ECC /* ECC Error */
#define IXGBE_EICS_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */
#define IXGBE_EICS_DHER IXGBE_EICR_DHER /* Desc Handler Error */
#define IXGBE_EICS_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */
@@ -621,10 +1057,16 @@
/* Extended Interrupt Mask Set */
#define IXGBE_EIMS_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
+#define IXGBE_EIMS_FLOW_DIR IXGBE_EICR_FLOW_DIR /* FDir Exception */
+#define IXGBE_EIMS_RX_MISS IXGBE_EICR_RX_MISS /* Packet Buffer Overrun */
+#define IXGBE_EIMS_PCI IXGBE_EICR_PCI /* PCI Exception */
+#define IXGBE_EIMS_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */
#define IXGBE_EIMS_LSC IXGBE_EICR_LSC /* Link Status Change */
#define IXGBE_EIMS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */
#define IXGBE_EIMS_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */
#define IXGBE_EIMS_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */
+#define IXGBE_EIMS_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */
+#define IXGBE_EIMS_ECC IXGBE_EICR_ECC /* ECC Error */
#define IXGBE_EIMS_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */
#define IXGBE_EIMS_DHER IXGBE_EICR_DHER /* Descr Handler Error */
#define IXGBE_EIMS_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */
@@ -632,10 +1074,16 @@
/* Extended Interrupt Mask Clear */
#define IXGBE_EIMC_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
+#define IXGBE_EIMC_FLOW_DIR IXGBE_EICR_FLOW_DIR /* FDir Exception */
+#define IXGBE_EIMC_RX_MISS IXGBE_EICR_RX_MISS /* Packet Buffer Overrun */
+#define IXGBE_EIMC_PCI IXGBE_EICR_PCI /* PCI Exception */
+#define IXGBE_EIMC_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */
#define IXGBE_EIMC_LSC IXGBE_EICR_LSC /* Link Status Change */
#define IXGBE_EIMC_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */
#define IXGBE_EIMC_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */
#define IXGBE_EIMC_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */
+#define IXGBE_EIMC_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */
+#define IXGBE_EIMC_ECC IXGBE_EICR_ECC /* ECC Error */
#define IXGBE_EIMC_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */
#define IXGBE_EIMC_DHER IXGBE_EICR_DHER /* Desc Handler Err */
#define IXGBE_EIMC_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */
@@ -658,6 +1106,33 @@
#define IXGBE_IMIREXT_CTRL_SYN 0x00020000 /* Check SYN bit in header */
#define IXGBE_IMIREXT_CTRL_FIN 0x00040000 /* Check FIN bit in header */
#define IXGBE_IMIREXT_CTRL_BP 0x00080000 /* Bypass check of control bits */
+#define IXGBE_IMIR_SIZE_BP_82599 0x00001000 /* Packet size bypass */
+#define IXGBE_IMIR_CTRL_URG_82599 0x00002000 /* Check URG bit in header */
+#define IXGBE_IMIR_CTRL_ACK_82599 0x00004000 /* Check ACK bit in header */
+#define IXGBE_IMIR_CTRL_PSH_82599 0x00008000 /* Check PSH bit in header */
+#define IXGBE_IMIR_CTRL_RST_82599 0x00010000 /* Check RST bit in header */
+#define IXGBE_IMIR_CTRL_SYN_82599 0x00020000 /* Check SYN bit in header */
+#define IXGBE_IMIR_CTRL_FIN_82599 0x00040000 /* Check FIN bit in header */
+#define IXGBE_IMIR_CTRL_BP_82599 0x00080000 /* Bypass check of control bits */
+#define IXGBE_IMIR_LLI_EN_82599 0x00100000 /* Enables low latency Int */
+#define IXGBE_IMIR_RX_QUEUE_MASK_82599 0x0000007F /* Rx Queue Mask */
+#define IXGBE_IMIR_RX_QUEUE_SHIFT_82599 21 /* Rx Queue Shift */
+#define IXGBE_IMIRVP_PRIORITY_MASK 0x00000007 /* VLAN priority mask */
+#define IXGBE_IMIRVP_PRIORITY_EN 0x00000008 /* VLAN priority enable */
+
+#define IXGBE_MAX_FTQF_FILTERS 128
+#define IXGBE_FTQF_PROTOCOL_MASK 0x00000003
+#define IXGBE_FTQF_PROTOCOL_TCP 0x00000000
+#define IXGBE_FTQF_PROTOCOL_UDP 0x00000001
+#define IXGBE_FTQF_PROTOCOL_SCTP 2
+#define IXGBE_FTQF_PRIORITY_MASK 0x00000007
+#define IXGBE_FTQF_PRIORITY_SHIFT 2
+#define IXGBE_FTQF_POOL_MASK 0x0000003F
+#define IXGBE_FTQF_POOL_SHIFT 8
+#define IXGBE_FTQF_5TUPLE_MASK_MASK 0x0000001F
+#define IXGBE_FTQF_5TUPLE_MASK_SHIFT 25
+#define IXGBE_FTQF_POOL_MASK_EN 0x40000000
+#define IXGBE_FTQF_QUEUE_ENABLE 0x80000000
/* Interrupt clear mask */
#define IXGBE_IRQ_CLEAR_MASK 0xFFFFFFFF
@@ -677,6 +1152,31 @@
#define IXGBE_IVAR_ALLOC_VAL 0x80 /* Interrupt Allocation valid */
+/* ETYPE Queue Filter/Select Bit Masks */
+#define IXGBE_MAX_ETQF_FILTERS 8
+#define IXGBE_ETQF_BCN 0x10000000 /* bit 28 */
+#define IXGBE_ETQF_1588 0x40000000 /* bit 30 */
+#define IXGBE_ETQF_FILTER_EN 0x80000000 /* bit 31 */
+#define IXGBE_ETQF_POOL_ENABLE (1 << 26) /* bit 26 */
+
+#define IXGBE_ETQS_RX_QUEUE 0x007F0000 /* bits 22:16 */
+#define IXGBE_ETQS_RX_QUEUE_SHIFT 16
+#define IXGBE_ETQS_LLI 0x20000000 /* bit 29 */
+#define IXGBE_ETQS_QUEUE_EN 0x80000000 /* bit 31 */
+
+/*
+ * ETQF filter list: one static filter per filter consumer. This is
+ * to avoid filter collisions later. Add new filters
+ * here!!
+ *
+ * Current filters:
+ * EAPOL 802.1x (0x888e): Filter 0
+ * BCN (0x8904): Filter 1
+ * 1588 (0x88f7): Filter 3
+ */
+#define IXGBE_ETQF_FILTER_EAPOL 0
+#define IXGBE_ETQF_FILTER_BCN 1
+#define IXGBE_ETQF_FILTER_1588 3
/* VLAN Control Bit Masks */
#define IXGBE_VLNCTRL_VET 0x0000FFFF /* bits 0-15 */
#define IXGBE_VLNCTRL_CFI 0x10000000 /* bit 28 */
@@ -684,21 +1184,28 @@
#define IXGBE_VLNCTRL_VFE 0x40000000 /* bit 30 */
#define IXGBE_VLNCTRL_VME 0x80000000 /* bit 31 */
+/* VLAN pool filtering masks */
+#define IXGBE_VLVF_VIEN 0x80000000 /* filter is valid */
+#define IXGBE_VLVF_ENTRIES 64
#define IXGBE_ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.1q protocol */
/* STATUS Bit Masks */
-#define IXGBE_STATUS_LAN_ID 0x0000000C /* LAN ID */
-#define IXGBE_STATUS_GIO 0x00080000 /* GIO Master Enable Status */
+#define IXGBE_STATUS_LAN_ID 0x0000000C /* LAN ID */
+#define IXGBE_STATUS_LAN_ID_SHIFT 2 /* LAN ID Shift*/
+#define IXGBE_STATUS_GIO 0x00080000 /* GIO Master Enable Status */
#define IXGBE_STATUS_LAN_ID_0 0x00000000 /* LAN ID 0 */
#define IXGBE_STATUS_LAN_ID_1 0x00000004 /* LAN ID 1 */
/* ESDP Bit Masks */
-#define IXGBE_ESDP_SDP4 0x00000001 /* SDP4 Data Value */
-#define IXGBE_ESDP_SDP5 0x00000002 /* SDP5 Data Value */
+#define IXGBE_ESDP_SDP0 0x00000001
+#define IXGBE_ESDP_SDP1 0x00000002
+#define IXGBE_ESDP_SDP4 0x00000010 /* SDP4 Data Value */
+#define IXGBE_ESDP_SDP5 0x00000020 /* SDP5 Data Value */
+#define IXGBE_ESDP_SDP6 0x00000040 /* SDP6 Data Value */
#define IXGBE_ESDP_SDP4_DIR 0x00000004 /* SDP4 IO direction */
-#define IXGBE_ESDP_SDP5_DIR 0x00000008 /* SDP5 IO direction */
+#define IXGBE_ESDP_SDP5_DIR 0x00002000 /* SDP5 IO direction */
/* LEDCTL Bit Masks */
#define IXGBE_LED_IVRT_BASE 0x00000040
@@ -730,9 +1237,17 @@
#define IXGBE_AUTOC_AN_RX_LOOSE 0x01000000
#define IXGBE_AUTOC_AN_RX_DRIFT 0x00800000
#define IXGBE_AUTOC_AN_RX_ALIGN 0x007C0000
+#define IXGBE_AUTOC_FECA 0x00040000
+#define IXGBE_AUTOC_FECR 0x00020000
+#define IXGBE_AUTOC_KR_SUPP 0x00010000
#define IXGBE_AUTOC_AN_RESTART 0x00001000
#define IXGBE_AUTOC_FLU 0x00000001
#define IXGBE_AUTOC_LMS_SHIFT 13
+#define IXGBE_AUTOC_LMS_10G_SERIAL (0x3 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_KX_KR (0x4 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_SGMII_1G_100M (0x5 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN (0x6 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII (0x7 << IXGBE_AUTOC_LMS_SHIFT)
#define IXGBE_AUTOC_LMS_MASK (0x7 << IXGBE_AUTOC_LMS_SHIFT)
#define IXGBE_AUTOC_LMS_1G_LINK_NO_AN (0x0 << IXGBE_AUTOC_LMS_SHIFT)
#define IXGBE_AUTOC_LMS_10G_LINK_NO_AN (0x1 << IXGBE_AUTOC_LMS_SHIFT)
@@ -741,15 +1256,24 @@
#define IXGBE_AUTOC_LMS_KX4_AN_1G_AN (0x6 << IXGBE_AUTOC_LMS_SHIFT)
#define IXGBE_AUTOC_LMS_ATTACH_TYPE (0x7 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
-#define IXGBE_AUTOC_1G_PMA_PMD 0x00000200
-#define IXGBE_AUTOC_10G_PMA_PMD 0x00000180
-#define IXGBE_AUTOC_10G_PMA_PMD_SHIFT 7
-#define IXGBE_AUTOC_1G_PMA_PMD_SHIFT 9
+#define IXGBE_AUTOC_1G_PMA_PMD_MASK 0x00000200
+#define IXGBE_AUTOC_1G_PMA_PMD_SHIFT 9
+#define IXGBE_AUTOC_10G_PMA_PMD_MASK 0x00000180
+#define IXGBE_AUTOC_10G_PMA_PMD_SHIFT 7
#define IXGBE_AUTOC_10G_XAUI (0x0 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
#define IXGBE_AUTOC_10G_KX4 (0x1 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
#define IXGBE_AUTOC_10G_CX4 (0x2 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
#define IXGBE_AUTOC_1G_BX (0x0 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT)
#define IXGBE_AUTOC_1G_KX (0x1 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_1G_SFI (0x0 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_1G_KX_BX (0x1 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT)
+
+#define IXGBE_AUTOC2_UPPER_MASK 0xFFFF0000
+#define IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK 0x00030000
+#define IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT 16
+#define IXGBE_AUTOC2_10G_KR (0x0 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC2_10G_XFI (0x1 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC2_10G_SFI (0x2 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
/* LINKS Bit Masks */
#define IXGBE_LINKS_KX_AN_COMP 0x80000000
@@ -759,6 +1283,7 @@
#define IXGBE_LINKS_RX_MODE 0x06000000
#define IXGBE_LINKS_TX_MODE 0x01800000
#define IXGBE_LINKS_XGXS_EN 0x00400000
+#define IXGBE_LINKS_SGMII_EN 0x02000000
#define IXGBE_LINKS_PCS_1G_EN 0x00200000
#define IXGBE_LINKS_1G_AN_EN 0x00100000
#define IXGBE_LINKS_KX_AN_IDLE 0x00080000
@@ -768,6 +1293,10 @@
#define IXGBE_LINKS_TL_FAULT 0x00001000
#define IXGBE_LINKS_SIGNAL 0x00000F00
+#define IXGBE_LINKS_SPEED_82599 0x30000000
+#define IXGBE_LINKS_SPEED_10G_82599 0x30000000
+#define IXGBE_LINKS_SPEED_1G_82599 0x20000000
+#define IXGBE_LINKS_SPEED_100_82599 0x10000000
#define IXGBE_LINK_UP_TIME 90 /* 9.0 Seconds */
#define IXGBE_AUTO_NEG_TIME 45 /* 4.5 Seconds */
@@ -844,6 +1373,7 @@
#define IXGBE_FW_PTR 0x0F
#define IXGBE_PBANUM0_PTR 0x15
#define IXGBE_PBANUM1_PTR 0x16
+#define IXGBE_PCIE_MSIX_82599_CAPS 0x72
#define IXGBE_PCIE_MSIX_82598_CAPS 0x62
/* MSI-X capability fields masks */
@@ -896,6 +1426,8 @@
#define IXGBE_PCI_LINK_SPEED 0xF
#define IXGBE_PCI_LINK_SPEED_2500 0x1
#define IXGBE_PCI_LINK_SPEED_5000 0x2
+#define IXGBE_PCI_HEADER_TYPE_REGISTER 0x0E
+#define IXGBE_PCI_HEADER_TYPE_MULTIFUNC 0x80
/* Number of 100 microseconds we wait for PCI Express master disable */
#define IXGBE_PCI_MASTER_DISABLE_TIMEOUT 800
@@ -948,6 +1480,7 @@
#define IXGBE_RXCTRL_RXEN 0x00000001 /* Enable Receiver */
#define IXGBE_RXCTRL_DMBYPS 0x00000002 /* Descriptor Monitor Bypass */
#define IXGBE_RXDCTL_ENABLE 0x02000000 /* Enable specific Rx Queue */
+#define IXGBE_RXDCTL_VME 0x40000000 /* VLAN mode enable */
#define IXGBE_FCTRL_SBP 0x00000002 /* Store Bad Packet */
#define IXGBE_FCTRL_MPE 0x00000100 /* Multicast Promiscuous Ena*/
@@ -958,9 +1491,23 @@
/* Receive Priority Flow Control Enable */
#define IXGBE_FCTRL_RPFCE 0x00004000
#define IXGBE_FCTRL_RFCE 0x00008000 /* Receive Flow Control Ena */
+#define IXGBE_MFLCN_PMCF 0x00000001 /* Pass MAC Control Frames */
+#define IXGBE_MFLCN_DPF 0x00000002 /* Discard Pause Frame */
+#define IXGBE_MFLCN_RPFCE 0x00000004 /* Receive Priority FC Enable */
+#define IXGBE_MFLCN_RFCE 0x00000008 /* Receive FC Enable */
/* Multiple Receive Queue Control */
#define IXGBE_MRQC_RSSEN 0x00000001 /* RSS Enable */
+#define IXGBE_MRQC_MRQE_MASK 0xF /* Bits 3:0 */
+#define IXGBE_MRQC_RT8TCEN 0x00000002 /* 8 TC no RSS */
+#define IXGBE_MRQC_RT4TCEN 0x00000003 /* 4 TC no RSS */
+#define IXGBE_MRQC_RTRSS8TCEN 0x00000004 /* 8 TC w/ RSS */
+#define IXGBE_MRQC_RTRSS4TCEN 0x00000005 /* 4 TC w/ RSS */
+#define IXGBE_MRQC_VMDQEN 0x00000008 /* VMDq2 64 pools no RSS */
+#define IXGBE_MRQC_VMDQRSS32EN 0x0000000A /* VMDq2 32 pools w/ RSS */
+#define IXGBE_MRQC_VMDQRSS64EN 0x0000000B /* VMDq2 64 pools w/ RSS */
+#define IXGBE_MRQC_VMDQRT8TCEN 0x0000000C /* VMDq2/RT 16 pool 8 TC */
+#define IXGBE_MRQC_VMDQRT4TCEN 0x0000000D /* VMDq2/RT 32 pool 4 TC */
#define IXGBE_MRQC_RSS_FIELD_MASK 0xFFFF0000
#define IXGBE_MRQC_RSS_FIELD_IPV4_TCP 0x00010000
#define IXGBE_MRQC_RSS_FIELD_IPV4 0x00020000
@@ -971,6 +1518,12 @@
#define IXGBE_MRQC_RSS_FIELD_IPV4_UDP 0x00400000
#define IXGBE_MRQC_RSS_FIELD_IPV6_UDP 0x00800000
#define IXGBE_MRQC_RSS_FIELD_IPV6_EX_UDP 0x01000000
+#define IXGBE_MRQC_L3L4TXSWEN 0x00008000
+
+/* Queue Drop Enable */
+#define IXGBE_QDE_ENABLE 0x00000001
+#define IXGBE_QDE_IDX_MASK 0x00007F00
+#define IXGBE_QDE_IDX_SHIFT 8
#define IXGBE_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
#define IXGBE_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
@@ -982,10 +1535,25 @@
#define IXGBE_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */
#define IXGBE_TXD_STAT_DD 0x00000001 /* Descriptor Done */
+#define IXGBE_RXDADV_IPSEC_STATUS_SECP 0x00020000
+#define IXGBE_RXDADV_IPSEC_ERROR_INVALID_PROTOCOL 0x08000000
+#define IXGBE_RXDADV_IPSEC_ERROR_INVALID_LENGTH 0x10000000
+#define IXGBE_RXDADV_IPSEC_ERROR_AUTH_FAILED 0x18000000
+#define IXGBE_RXDADV_IPSEC_ERROR_BIT_MASK 0x18000000
+/* Multiple Transmit Queue Command Register */
+#define IXGBE_MTQC_RT_ENA 0x1 /* DCB Enable */
+#define IXGBE_MTQC_VT_ENA 0x2 /* VMDQ2 Enable */
+#define IXGBE_MTQC_64Q_1PB 0x0 /* 64 queues 1 pack buffer */
+#define IXGBE_MTQC_64VF 0x8 /* 2 TX Queues per pool w/64VF's */
+#define IXGBE_MTQC_8TC_8TQ 0xC /* 8 TC if RT_ENA or 8 TQ if VT_ENA */
+
/* Receive Descriptor bit definitions */
#define IXGBE_RXD_STAT_DD 0x01 /* Descriptor Done */
#define IXGBE_RXD_STAT_EOP 0x02 /* End of Packet */
+#define IXGBE_RXD_STAT_FLM 0x04 /* FDir Match */
#define IXGBE_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
+#define IXGBE_RXDADV_NEXTP_MASK 0x000FFFF0 /* Next Descriptor Index */
+#define IXGBE_RXDADV_NEXTP_SHIFT 0x00000004
#define IXGBE_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
#define IXGBE_RXD_STAT_L4CS 0x20 /* L4 xsum calculated */
#define IXGBE_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
@@ -994,6 +1562,10 @@
#define IXGBE_RXD_STAT_VEXT 0x200 /* 1st VLAN found */
#define IXGBE_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */
#define IXGBE_RXD_STAT_DYNINT 0x800 /* Pkt caused INT via DYNINT */
+#define IXGBE_RXD_STAT_LLINT 0x800 /* Pkt caused Low Latency Interrupt */
+#define IXGBE_RXD_STAT_TS 0x10000 /* Time Stamp */
+#define IXGBE_RXD_STAT_SECP 0x20000 /* Security Processing */
+#define IXGBE_RXD_STAT_LB 0x40000 /* Loopback Status */
#define IXGBE_RXD_STAT_ACK 0x8000 /* ACK Packet indication */
#define IXGBE_RXD_ERR_CE 0x01 /* CRC Error */
#define IXGBE_RXD_ERR_LE 0x02 /* Length Error */
@@ -1002,6 +1574,8 @@
#define IXGBE_RXD_ERR_USE 0x20 /* Undersize Error */
#define IXGBE_RXD_ERR_TCPE 0x40 /* TCP/UDP Checksum Error */
#define IXGBE_RXD_ERR_IPE 0x80 /* IP Checksum Error */
+#define IXGBE_RXDADV_ERR_MASK 0xfff00000 /* RDESC.ERRORS mask */
+#define IXGBE_RXDADV_ERR_SHIFT 20 /* RDESC.ERRORS shift */
#define IXGBE_RXDADV_ERR_HBO 0x00800000 /*Header Buffer Overflow */
#define IXGBE_RXDADV_ERR_CE 0x01000000 /* CRC Error */
#define IXGBE_RXDADV_ERR_LE 0x02000000 /* Length Error */
@@ -1016,9 +1590,23 @@
#define IXGBE_RXD_CFI_MASK 0x1000 /* CFI is bit 12 */
#define IXGBE_RXD_CFI_SHIFT 12
+#define IXGBE_RXDADV_STAT_DD IXGBE_RXD_STAT_DD /* Done */
+#define IXGBE_RXDADV_STAT_EOP IXGBE_RXD_STAT_EOP /* End of Packet */
+#define IXGBE_RXDADV_STAT_FLM IXGBE_RXD_STAT_FLM /* FDir Match */
+#define IXGBE_RXDADV_STAT_VP IXGBE_RXD_STAT_VP /* IEEE VLAN Pkt */
+#define IXGBE_RXDADV_STAT_MASK 0x000fffff /* Stat/NEXTP: bit 0-19 */
+
+/* PSRTYPE bit definitions */
+#define IXGBE_PSRTYPE_TCPHDR 0x00000010
+#define IXGBE_PSRTYPE_UDPHDR 0x00000020
+#define IXGBE_PSRTYPE_IPV4HDR 0x00000100
+#define IXGBE_PSRTYPE_IPV6HDR 0x00000200
/* SRRCTL bit definitions */
#define IXGBE_SRRCTL_BSIZEPKT_SHIFT 10 /* so many KBs */
+#define IXGBE_SRRCTL_RDMTS_SHIFT 22
+#define IXGBE_SRRCTL_RDMTS_MASK 0x01C00000
+#define IXGBE_SRRCTL_DROP_EN 0x10000000
#define IXGBE_SRRCTL_BSIZEPKT_MASK 0x0000007F
#define IXGBE_SRRCTL_BSIZEHDR_MASK 0x00003F00
#define IXGBE_SRRCTL_DESCTYPE_LEGACY 0x00000000
@@ -1033,6 +1621,7 @@
#define IXGBE_RXDADV_RSSTYPE_MASK 0x0000000F
#define IXGBE_RXDADV_PKTTYPE_MASK 0x0000FFF0
+#define IXGBE_RXDADV_PKTTYPE_MASK_EX 0x0001FFF0
#define IXGBE_RXDADV_HDRBUFLEN_MASK 0x00007FE0
#define IXGBE_RXDADV_HDRBUFLEN_SHIFT 5
#define IXGBE_RXDADV_SPLITHEADER_EN 0x00001000
@@ -1060,6 +1649,20 @@
#define IXGBE_RXDADV_PKTTYPE_UDP 0x00000200 /* UDP hdr present */
#define IXGBE_RXDADV_PKTTYPE_SCTP 0x00000400 /* SCTP hdr present */
#define IXGBE_RXDADV_PKTTYPE_NFS 0x00000800 /* NFS hdr present */
+#define IXGBE_RXDADV_PKTTYPE_IPSEC_ESP 0x00001000 /* IPSec ESP */
+#define IXGBE_RXDADV_PKTTYPE_IPSEC_AH 0x00002000 /* IPSec AH */
+#define IXGBE_RXDADV_PKTTYPE_LINKSEC 0x00004000 /* LinkSec Encap */
+#define IXGBE_RXDADV_PKTTYPE_ETQF 0x00008000 /* PKTTYPE is ETQF index */
+#define IXGBE_RXDADV_PKTTYPE_ETQF_MASK 0x00000070 /* ETQF has 8 indices */
+#define IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT 4 /* Right-shift 4 bits */
+
+/* Security Processing bit Indication */
+#define IXGBE_RXDADV_LNKSEC_STATUS_SECP 0x00020000
+#define IXGBE_RXDADV_LNKSEC_ERROR_NO_SA_MATCH 0x08000000
+#define IXGBE_RXDADV_LNKSEC_ERROR_REPLAY_ERROR 0x10000000
+#define IXGBE_RXDADV_LNKSEC_ERROR_BIT_MASK 0x18000000
+#define IXGBE_RXDADV_LNKSEC_ERROR_BAD_SIG 0x18000000
+
/* Masks to determine if packets should be dropped due to frame errors */
#define IXGBE_RXD_ERR_FRAME_ERR_MASK ( \
IXGBE_RXD_ERR_CE | \
@@ -1089,6 +1692,14 @@
#define IXGBE_RX_DESC_SPECIAL_PRI_SHIFT 0x000D /* Priority in upper 3 of 16 */
#define IXGBE_TX_DESC_SPECIAL_PRI_SHIFT IXGBE_RX_DESC_SPECIAL_PRI_SHIFT
+/* Little Endian defines */
+#ifndef __le32
+#define __le32 u32
+#endif
+#ifndef __le64
+#define __le64 u64
+
+#endif
/* Transmit Descriptor - Legacy */
struct ixgbe_legacy_tx_desc {
@@ -1176,6 +1787,9 @@ struct ixgbe_adv_tx_context_desc {
/* Adv Transmit Descriptor Config Masks */
#define IXGBE_ADVTXD_DTALEN_MASK 0x0000FFFF /* Data buf length(bytes) */
+#define IXGBE_ADVTXD_MAC_LINKSEC 0x00040000 /* Insert LinkSec */
+#define IXGBE_ADVTXD_IPSEC_SA_INDEX_MASK 0x000003FF /* IPSec SA index */
+#define IXGBE_ADVTXD_IPSEC_ESP_LEN_MASK 0x000001FF /* IPSec ESP length */
#define IXGBE_ADVTXD_DTYP_MASK 0x00F00000 /* DTYP mask */
#define IXGBE_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Desc */
#define IXGBE_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */
@@ -1210,6 +1824,9 @@ struct ixgbe_adv_tx_context_desc {
#define IXGBE_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */
#define IXGBE_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 Packet TYPE of SCTP */
#define IXGBE_ADVTXD_TUCMD_MKRREQ 0x00002000 /*Req requires Markers and CRC*/
+#define IXGBE_ADVTXD_POPTS_IPSEC 0x00000400 /* IPSec offload request */
+#define IXGBE_ADVTXD_TUCMD_IPSEC_TYPE_ESP 0x00002000 /* IPSec Type ESP */
+#define IXGBE_ADVTXD_TUCMD_IPSEC_ENCRYPT_EN 0x00004000/* ESP Encrypt Enable */
#define IXGBE_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */
#define IXGBE_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */
@@ -1223,6 +1840,12 @@ typedef u32 ixgbe_link_speed;
#define IXGBE_LINK_SPEED_10GB_FULL 0x0080
#define IXGBE_LINK_SPEED_82598_AUTONEG (IXGBE_LINK_SPEED_1GB_FULL | \
IXGBE_LINK_SPEED_10GB_FULL)
+#define IXGBE_LINK_SPEED_82599_AUTONEG (IXGBE_LINK_SPEED_100_FULL | \
+ IXGBE_LINK_SPEED_1GB_FULL | \
+ IXGBE_LINK_SPEED_10GB_FULL)
+
+#define IXGBE_PCIE_DEV_CTRL_2 0xC8
+#define PCIE_COMPL_TO_VALUE 0x05
/* Physical layer type */
typedef u32 ixgbe_physical_layer;
@@ -1239,7 +1862,6 @@ typedef u32 ixgbe_physical_layer;
#define IXGBE_PHYSICAL_LAYER_1000BASE_KX 0x0200
#define IXGBE_PHYSICAL_LAYER_1000BASE_BX 0x0400
-
enum ixgbe_eeprom_type {
ixgbe_eeprom_uninitialized = 0,
ixgbe_eeprom_spi,
@@ -1249,12 +1871,14 @@ enum ixgbe_eeprom_type {
enum ixgbe_mac_type {
ixgbe_mac_unknown = 0,
ixgbe_mac_82598EB,
+ ixgbe_mac_82599EB,
ixgbe_num_macs
};
enum ixgbe_phy_type {
ixgbe_phy_unknown = 0,
ixgbe_phy_tn,
+ ixgbe_phy_cu_unknown,
ixgbe_phy_qt,
ixgbe_phy_xaui,
ixgbe_phy_nl,
@@ -1263,22 +1887,31 @@ enum ixgbe_phy_type {
ixgbe_phy_sfp_avago,
ixgbe_phy_sfp_ftl,
ixgbe_phy_sfp_unknown,
+ ixgbe_phy_sfp_intel,
ixgbe_phy_generic
};
/*
* SFP+ module type IDs:
*
- * ID Module Type
+ * ID Module Type
* =============
- * 0 SFP_DA_CU
- * 1 SFP_SR
- * 2 SFP_LR
+ * 0 SFP_DA_CU
+ * 1 SFP_SR
+ * 2 SFP_LR
+ * 3 SFP_DA_CU_CORE0 - 82599-specific
+ * 4 SFP_DA_CU_CORE1 - 82599-specific
+ * 5 SFP_SR/LR_CORE0 - 82599-specific
+ * 6 SFP_SR/LR_CORE1 - 82599-specific
*/
enum ixgbe_sfp_type {
ixgbe_sfp_type_da_cu = 0,
ixgbe_sfp_type_sr = 1,
ixgbe_sfp_type_lr = 2,
+ ixgbe_sfp_type_da_cu_core0 = 3,
+ ixgbe_sfp_type_da_cu_core1 = 4,
+ ixgbe_sfp_type_srlr_core0 = 5,
+ ixgbe_sfp_type_srlr_core1 = 6,
ixgbe_sfp_type_not_present = 0xFFFE,
ixgbe_sfp_type_unknown = 0xFFFF
};
@@ -1300,6 +1933,40 @@ enum ixgbe_fc_mode {
ixgbe_fc_default
};
+/* PCI bus types */
+enum ixgbe_bus_type {
+ ixgbe_bus_type_unknown = 0,
+ ixgbe_bus_type_pci,
+ ixgbe_bus_type_pcix,
+ ixgbe_bus_type_pci_express,
+ ixgbe_bus_type_reserved
+};
+
+/* PCI bus speeds */
+enum ixgbe_bus_speed {
+ ixgbe_bus_speed_unknown = 0,
+ ixgbe_bus_speed_33,
+ ixgbe_bus_speed_66,
+ ixgbe_bus_speed_100,
+ ixgbe_bus_speed_120,
+ ixgbe_bus_speed_133,
+ ixgbe_bus_speed_2500,
+ ixgbe_bus_speed_5000,
+ ixgbe_bus_speed_reserved
+};
+
+/* PCI bus widths */
+enum ixgbe_bus_width {
+ ixgbe_bus_width_unknown = 0,
+ ixgbe_bus_width_pcie_x1,
+ ixgbe_bus_width_pcie_x2,
+ ixgbe_bus_width_pcie_x4 = 4,
+ ixgbe_bus_width_pcie_x8 = 8,
+ ixgbe_bus_width_32,
+ ixgbe_bus_width_64,
+ ixgbe_bus_width_reserved
+};
+
struct ixgbe_addr_filter_info {
u32 num_mc_addrs;
u32 rar_used_count;
@@ -1309,6 +1976,16 @@ struct ixgbe_addr_filter_info {
bool user_set_promisc;
};
+/* Bus parameters */
+struct ixgbe_bus_info {
+ enum ixgbe_bus_speed speed;
+ enum ixgbe_bus_width width;
+ enum ixgbe_bus_type type;
+
+ u16 func;
+ u16 lan_id;
+};
+
/* Flow control parameters */
struct ixgbe_fc_info {
u32 high_water; /* Flow Control High-water */
@@ -1377,6 +2054,14 @@ struct ixgbe_hw_stats {
u64 qptc[16];
u64 qbrc[16];
u64 qbtc[16];
+ u64 qprdc[16];
+ u64 pxon2offc[8];
+ u64 fdirustat_add;
+ u64 fdirustat_remove;
+ u64 fdirfstat_fadd;
+ u64 fdirfstat_fremove;
+ u64 fdirmatch;
+ u64 fdirmiss;
};
/* forward declaration */
@@ -1401,12 +2086,15 @@ struct ixgbe_mac_operations {
s32 (*start_hw)(struct ixgbe_hw *);
s32 (*clear_hw_cntrs)(struct ixgbe_hw *);
enum ixgbe_media_type (*get_media_type)(struct ixgbe_hw *);
- s32 (*get_supported_physical_layer)(struct ixgbe_hw *);
+ u32 (*get_supported_physical_layer)(struct ixgbe_hw *);
s32 (*get_mac_addr)(struct ixgbe_hw *, u8 *);
s32 (*stop_adapter)(struct ixgbe_hw *);
s32 (*get_bus_info)(struct ixgbe_hw *);
+ void (*set_lan_id)(struct ixgbe_hw *);
s32 (*read_analog_reg8)(struct ixgbe_hw*, u32, u8*);
s32 (*write_analog_reg8)(struct ixgbe_hw*, u32, u8);
+ s32 (*setup_sfp)(struct ixgbe_hw *);
+ s32 (*enable_rx_dma)(struct ixgbe_hw *, u32);
/* Link */
s32 (*setup_link)(struct ixgbe_hw *);
@@ -1462,7 +2150,7 @@ struct ixgbe_phy_operations {
struct ixgbe_eeprom_info {
struct ixgbe_eeprom_operations ops;
enum ixgbe_eeprom_type type;
- u32 semaphore_delay;
+ u32 semaphore_delay;
u16 word_size;
u16 address_bits;
};
@@ -1508,6 +2196,7 @@ struct ixgbe_hw {
struct ixgbe_fc_info fc;
struct ixgbe_phy_info phy;
struct ixgbe_eeprom_info eeprom;
+ struct ixgbe_bus_info bus;
u16 device_id;
u16 vendor_id;
u16 subsystem_device_id;
@@ -1546,6 +2235,7 @@ struct ixgbe_info {
#define IXGBE_ERR_I2C -18
#define IXGBE_ERR_SFP_NOT_SUPPORTED -19
#define IXGBE_ERR_SFP_NOT_PRESENT -20
+#define IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT -21
#define IXGBE_NOT_IMPLEMENTED 0x7FFFFFFF
#endif /* _IXGBE_TYPE_H_ */