Message ID | 1234533163557-git-send-email-gjb@semihalf.com (mailing list archive) |
---|---|
State | Superseded, archived |
Delegated to: | Grant Likely |
Headers | show |
Hi Grzegorz, Please rebase this patch on top of Ben Herrenschmidt's -next tree. This version is making changes to an older version of the digsy_mtc.dts file. g. On Fri, Feb 13, 2009 at 6:52 AM, Grzegorz Bernacki <gjb@semihalf.com> wrote: > On digsy MTC PSC4 and PSC5 should be configured as UART, not PSC3 and PSC4. > > Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> > --- > arch/powerpc/boot/dts/digsy_mtc.dts | 16 ++++++++-------- > 1 files changed, 8 insertions(+), 8 deletions(-) > > diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts > index 9c76c38..ce33c7c 100644 > --- a/arch/powerpc/boot/dts/digsy_mtc.dts > +++ b/arch/powerpc/boot/dts/digsy_mtc.dts > @@ -164,21 +164,21 @@ > reg = <0x1f00 0x100>; > }; > > - serial@2400 { // PSC3 > + serial@2600 { // PSC4 > device_type = "serial"; > compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; > - cell-index = <2>; > - reg = <0x2400 0x100>; > - interrupts = <2 3 0>; > + cell-index = <3>; > + reg = <0x2600 0x100>; > + interrupts = <2 11 0>; > interrupt-parent = <&mpc5200_pic>; > }; > > - serial@2600 { // PSC4 > + serial@2800 { // PSC5 > device_type = "serial"; > compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; > - cell-index = <3>; > - reg = <0x2600 0x100>; > - interrupts = <2 11 0>; > + cell-index = <5>; > + reg = <0x2800 0x100>; > + interrupts = <2 12 0>; > interrupt-parent = <&mpc5200_pic>; > }; > > -- > 1.6.0.6 > >
diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts index 9c76c38..ce33c7c 100644 --- a/arch/powerpc/boot/dts/digsy_mtc.dts +++ b/arch/powerpc/boot/dts/digsy_mtc.dts @@ -164,21 +164,21 @@ reg = <0x1f00 0x100>; }; - serial@2400 { // PSC3 + serial@2600 { // PSC4 device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <2>; - reg = <0x2400 0x100>; - interrupts = <2 3 0>; + cell-index = <3>; + reg = <0x2600 0x100>; + interrupts = <2 11 0>; interrupt-parent = <&mpc5200_pic>; }; - serial@2600 { // PSC4 + serial@2800 { // PSC5 device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <3>; - reg = <0x2600 0x100>; - interrupts = <2 11 0>; + cell-index = <5>; + reg = <0x2800 0x100>; + interrupts = <2 12 0>; interrupt-parent = <&mpc5200_pic>; };
On digsy MTC PSC4 and PSC5 should be configured as UART, not PSC3 and PSC4. Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> --- arch/powerpc/boot/dts/digsy_mtc.dts | 16 ++++++++-------- 1 files changed, 8 insertions(+), 8 deletions(-)